TRAILERING

WARNING

Keep everyone clear of stern area when raising or lowering the outboard. Personal injury or death can result from contact with moving parts of the outboard.

Trailering Bracket

To engage bracket— Tilt the motor fully using the tilt switch inside the boat or the trailering tilt switch.

1. Trailering tilt switch 2. Tilt switch inside boat

Pull down the trailering bracket. A detent will hold the bracket in position. Lower the motor until the trailering bracket locks into place in the stern brackets. To disengage bracket— Tilt the motor fully. Return the trailering bracket to its stowed position. Lower the motor to its vertical position.

Trailer your boat with the motor in a vertical position. If your trailer does not provide adequate road clearance, the motor can be trailered while tilted by using the motor’s trailering bracket. IMPORTANT: DO NOT use the tilt support lever when trailering.