Operation – Starting the engine

3. Turn the ignition key to position “I”.

ð The warning buzzer sounds.

B-ELE-0081

4.

The starter switch is designed with a re-start lock. The ignition key must first be turned back to position “0” before a new starting attempt can be made.

B-ELE-0082 ð The starter cranks the engine. The warning buzzer stops.

NOTICE!

Components may get damaged!

–Starting attempts should not exceed 30 seconds uninterrupted or max. 3 times for 10 seconds. Then allow the starter to cool down to ambient temperature. –If the engine has not started after these attempts, determine the cause.

Turn the ignition key further to position “II”.

NOTICE!

Danger of engine damage! –Warm up engine for a short while before starting work. Do not operate the engine immediately under full load.

6.3 Operation

Operation – Operation

Operate the machine only with the steering rod folded down. Use only the steering rod to steer the machine. Guide the machine so that your hands do not hit against solid objects.

CAUTION!

Danger of injury caused by uncontrolled machine movement!

–Always hold on to a running machine. –Always keep an eye on a running machine.

Protective equipment: n Hearing protection n Safety shoes ð The machines vibrates forward with a speed which corresponds with the travel lever position.

1.

NOTICE!

The centrifugal clutch may be damaged! –Operate the machine only with full throttle.

Set the throttle lever to “MAX” position.

2. Shift the travel lever forward.