7. UNDER CARRIAGE 1

- O OPTION : STD Track, 4.6m Boom, 2.5 5m Arm, 500mm Rubber Shoe

: 2.59m : 4.6m ( : 2.5m ( : Withou HT : 2200 k : 500mm : Withou : 1000 k : RATIN

METRIC A(m)

B(m) 7.5 6 4.5 3 1.5 0 -1.5 -3

FEET A(ft)

B(ft) 20 15 10 5 0 -5 -10

1. Load p 2. Capac 3. Lift cap 4. The le 5. The to 2,200k 6. Lift cap 3 4.5 TRACK WIDTH (8' 6”) STD Track BOOM 15' 1") ARM 8' 2”) BUCKET t Bucket COUNTER WEIGH g (4850 lb) SHOE (20") Rubber Dozer t Dozer UNIT g (1000 lb) G OVER FRONT

: RATING OVER SIDE OR 360 degr ree

6 MAX. RE EACH

*6.63 *8.33 *7.16 9.18 9.33 5.92 5.20 4.91 4.88 5.00 *3.64 *3.92 *4.92 4.70 4.51 4.44 4.50 3.38 3.31 3.11 2.86 2.69 2.63 2.68 A(m)

*2.75 *2.75 3.61 *2.16 *2.16 5.42 3.18 2.04 *2.00 1.81 6.39 3.10 1.97 *1.99 1.55 6.91 3.00 1.87 *2.11 1.45 7.07 2.91 1.79 *2.36 1.47 6.90 2.88 1.77 2.65 1.64 6.37 3.46 2.12 5.37 *4.8 .37 *4.4 .24 *4.3 .03 *4.6 .86 *5.2 .82 5.8 7.7

10

*14.18 *20.28 *16.53 19.59 19.92 12.77 11.20 10.55 10.49 10.74 15

*7.84 *8.57 *10.67 10.11 9.69 9.54 9.68 20 MAX. RE EACH

A(ft)

7.25 1 *4.81 17.49 7.12 *6.38 4 2 4.03 20.87 6.70 6.67 4 9 3.42 22.62 6.18 6.45 4 4 3.19 23.18 5.81 6.26 3 1 3.23 22.62 5.68 6.21 3 7 3.62 20.84 5.80 2 4.73 17.49

point is the end of the arm m cities marked with an asterisk (*) are limited by hydraulic capac cities. pacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. ast stable po osition is over the side. tal weight of machine is 13,200kg (29,101 lb). Included are the; boom 4.6m (15’ 1”), arm 2.5m (8’ 2 kg (4,850 lb) counterweight, without bucket, all operating fluids and a 75kg g (165 lb) operator. pacities are in compliance with ISO 10567.

MODEL DX X140LC-3

DWG No. 95 50103-00442 2 44/50

- O OPTION : STD Track, 4.6m Boom, 2.5 5m Arm, 500 0mm Rubber TRAC BOOM ARM BUCK COUN SHOE Dozer UNIT : R

Shoe, Dozer Blade : 2.59m : 4.6m ( : 2.5 m : Withou HT : 2200 k : 500mm : Dozer : 1000 k ER FRONT

K WIDTH (8' 6”) STD Track 15' 1") (8' 2”) ET t Bucket TER WEIGH g (4850 lb) (20") Rubber Up (Rear) g (1000 lb) ATING OVE

: RATING OVER SIDE OR 360 degr ree

METRIC A(m)

B(m) 7.5 6 4.5 3 1.5 0 -1.5 -3

FEET A(ft)

B(ft) 20 15 10 5 0 -5 -10

1. Load p 2. Capac 3. Lift cap 4. The le 5. The to 2,200k 6. Lift cap 3 4.5 6 MAX. RE EACH

*6.63 *8.33 *7.16 *10.34 *9.80 6.23 5.50 5.21 5.19 5.30 *3.64 *3.92 *4.92 5.50 5.30 5.23 5.29 A(m)

*2.75 *2.75 3.61 3.55 *2.16 *2.16 5.42 3.48 *3.19 2.16 *2.00 1.92 6.39 3.28 3.63 2.09 *1.99 1.65 6.91 3.04 3.52 1.99 *2.11 1.54 7.07 2.86 3.44 1.91 *2.36 1.57 6.90 2.81 3.41 1.89 *2.89 1.75 6.37 2.86 4.07 2.26 5.37 7.62 *4.8 7.49 * .62 *4.4 7.07 .49 *4.3 6.55 .29 *4.6 6.18 .12 *5.2 6.05 .07 *6.4 6.17 9.0

10

*14.18 *20.28 *16.53 23.01 *21.17 13.43 11.86 11.20 11.14 11.40 15

*7.84 *8.57 *10.67 11.82 11.40 11.25 11.39 20 MAX. RE EACH

A(ft)

1 *4.81 17.49 6.38 4 2 4.27 20.87 7.82 4 9 3.65 22.62 7.59 4 4 3.40 23.18 7.40 4 1 3.46 22.62 7.35 4 0 3.86 20.84 9 5.03 17.49

point is the end of the arm m cities marked with an asterisk (*) are limited by hydraulic capac cities. pacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. ast stable po osition is over the side. tal weight of machine is 14,000kg (30,865 lb). Included are the; boom 4.6m (15’ 1”), arm 2.5m (8’ 2 kg (4,850 lb) counterweight, without bucket, all operating fluids and a 75kg g (165 lb) operator. pacities are in compliance with ISO 10567.