INSTRUMENTATION WIRING DIAGRAM

NOTE: ENGINE HARNESS WIRED FOR PANELS USING VOLTMETERS ONLY. NOTE A : POWER FOR A FUSED ACCESSORY PANEL MAY BE TAKEN FROM THIS LOCATION. LOAD CANNOT EXCEED 30 AMPS.

2-PIN WIRE HARNESS COLOR CHART

CIRCUIT CIRCUIT ENGINE HARNESS NUMBER NAME WIRE COLOR 1. A VBAT 2. GROUND RED/PURPLE BLACK

ENGINE HARNESS

8-PIN WIRE HARNESS COLOR CHART

CIRCUIT CIRCUIT ENGINE HARNESS NUMBER NAME WIRE COLOR

*1. *CHECK GAUGES LAMP GRAY/BLACK* 2. TACHOMETER GRAY 3. COOLANT TEMP TAN 4. BUZZER TAN/BLACK 5. IGNITION PURPLE 6. MIL GREEN/YELLOW 7. STARTER YELLOW/RED 8. OIL PRESSURE DARK BLUE

*CES ENGINES ONLY

TWIN ENGINE MASTER/SLAVE CONNECTOR

2-PIN BOAT HARNESS CONNECTOR

FUEL TANK SOLENOID CONNECTOR

8-PIN BOAT HARNESS CONNECTOR

SPEED CONTROL/ CAN BUS CONNECTOR

ENGINE HARNESS

14-PIN WIRE HARNESS COLOR CHART

CIRCUIT CIRCUIT ENGINE HARNESS NUMBER NAME WIRE COLOR

A. HEATER PUMP POWER RED B. LAKE TEMPERATURE BLU/BLK C. PANEL GROUND BLK D. IGNITION PURPLE E. CAN BUS + BLK/WHITE F. CAN BUS - WHITE G. STARTER YELLOW/RED H. TCP 1 5 VOLT LT GRN/RED J. TCP 1 GROUND BLK/WHITE K. TCP 1 SIGNAL DK BLU/ORANGE L. TCP 2 5 VOLT LT GRN/PURPLE M. TCP 2 GROUND LT GRN/BLK N. TCP 2 SIGNAL ORN/BLK

FUEL PUMP CONNECTORS PADDLEWHEEL CONNECTOR

NOTE: The ‘MIL’ or Malfunction Indicator Lamp may be labeled the “Check Engine Lamp” on the instrument panel. Check the boat owners manual for exact labelling.

14-PIN BOAT HARNESS CONNECTOR

IMPORTANT: Your engine is designed to work with the standard electronics installed in your boat. If you add other electrical components or accessories, you could change the way the fuel injection controls your engine or the overall electrical system functions. Before adding electrical equipment, consult your Certified Dealer. If you don’t, your engine may not perform properly.

CAUTION

Add-on equipment may adversely affect the alternator output or overload the electrical system. Any damage caused as a result will not be covered by, and may void, your warranty.