1 minute read
Bolt X 4
from CNH Joystick Steering Kit with Secondary Electrical 921G W230D Wheel Loader Instructions Manual
4 - PRE-ASSEMBL Y
PREP ARING FOR ASSEMBL Y
Preparation
Park the machine a level surface and lower the bucket the ground.
Stop the engine and apply the parking brake. W ait 5 s. Then, turn the ignition key the position. the joystick, slide the roller switch (forward and backward, least three times) discharge the auxiliary line pressure.
Press the Quick Coupler switch the OFF position.
The light switch should not illuminated.
Move the joystick in both directions (at least times) discharge the pilot control accumulator pressure. T urn the ignition key the OFF position. T urn the master disconnect switch the OFF position.
Loosen the hydraulic tank fill cap relieve any pressure in the hydraulic system. 10. Place a suitable container under the hydraulic tank drain plug. Remove the plug and drain the oil from the hydraulic tank.
