2 minute read
Outer arm
5 Safety Instructions
Read and follow the operator's manual and the safety instructions before putting the machine into operation! DESIGNATED USE
The CLAAS ROTARY TEDDER is exclusively built for nor- mal use for agricultural work (correct use). The tedder is designed and intended for use in col-lecting cut stem crops lying on the ground. Use in any other way is considered as contrary to the intended use. The manufacturer does not accept any liability for such use; the user accepts all risk arising from such use. Designated use also includes observing the service, maintenance and repair conditions as prescribed by the manufacturer. The CLAAS ROTARY TEDDER may only be used, main- tained and repaired by persons who are familiar with this work and who have been instructed about the dangers involved. Observe the pertinent accident prevention regula- tions and other generally acknowledged regulations regarding safety and occupational health, as well as the regulations and standards relevant to motor vehicles and traffic. Modification of the machine without proper authority preclude any manufacturer's liability for damage resulting from any such modifications.
IDENTIFICATION OF WARNINGS AND DANGERS
All parts of this manual having to do with your safety or the safe operation of the machine are marked with the following signs. Please supply all safety instructions to any other user.
Danger!
Failure to observe the instructions identi- fied by this symbol may result in danger for life and limb of the user or other persons. –Measures for avoiding danger.
Caution!
Sign to indicate instructions which must be observed. Failure to do so could result in damage to the machine. –Measures for avoiding danger to the machine.
Note!
This symbol identifies instructions that make it easier to use the machine effectively and economically.
Environment!
Failure to observe the instructions identified by this symbol results in damage to the environment. The environment is in danger if environmentally hazardous material (e.g. waste oil) is not subject to correct use and/or disposal.
The warning and instruction signs placed on the combine provide recommendations for safe opera- tion. These instructions involve your safety – observe them at all times!
Basic Rule:
Always check the operating and road safety of trac- tor and machine before starting up!
General:
In addition to the information set forth in this opera- tor's manual, also follow the general instructions for safety and accident prevention. The attached warning and information stickers pro- vide important information for safe operation; these instructions involve your safety – observe them at all times! Follow the regulations in force as you use public roads! Before starting work, familiarise yourself with all the controls and instruments and their functions, as it will be too late once you have set off. An adequate safe distance must be maintained from the cutting tools while working!
