4.1.5 Carry out test run

1716

48 4.1.5 Carry out test run

–Flip shut the flaps of the central electrics and lock.

Remount protective covers. Bolt drive wheel back on. Tightening torque of the wheel nuts, see Operator's Manual of the combine harvester. –Flip shut central electrics and lock. Start engine and actuate the control valve by hand. Drive cylinder of the moisture sensor out and in multiple times. Shut down engine and check hydraulic oil.

Configure LEM via CDS 5000 and conduct test run in the field according to CEBIS combine harvester operator's manual. Do not bleed hydraulic cylinder for grain elevator chain tensioning. (Fig.48)