Safety rules

Introduction

Safety rules

Safety instructions and risk information

172364-001

All operations described in this manual must be carried out by after-sales service technicians with the requisite training. For safety and warranty reasons, operations must be carried out only by manufacturer-approved personnel. All such personnel must have received the correct specialist training. Other prerequisites are competence in the use of electrical and hydraulic measuring tools and a thorough knowledge of how to use the special tools. The user must also know how to use the machine, and be aware of all the associated risks.

Special instructions relating to placing the tractor on axle stands

► It is essential that flat, horizontal and firm ground is used when placing the tractor on axle stands. Position the axle stands: ► At the rear, under the rear axle tubes. ► At the front, either side of the front axle differential casing. ► To install the axle stands under the tractor, it is essential first to raise the tractor using the correct lifting tools. ► Use axle stands that are suitable for the weight of the tractor in question. Refer to the specifications of the tractor to carefully choose the appropriate axle stands and lifting device. ► Do not start the engine when the axle stands are positioned under the rear axle of the tractor. The tractor may become unbalanced if the brakes are activated (service brake or handbrake). ► If it is necessary to start the engine: ► The axle stands must be positioned under both the rear axle and the front axle of the tractor. ► Apply the handbrake.