logic CN1_44 over current over 2s

213

230 Hydraulic Fault FWD/BW D Switch Active Pump motor temperature is above defined alarm level (110°C). Power reduction active. Normal Mode active.

FWD/BWD switch has been active during start-up check. All controls must be in neutral position before the truck can be activated. Stop mode active.

231 Throttle Active Throttle pedal has been activated at start-up. Stop mode active.

232 Brake Active Brake pedal has been activated at start-up. Stop mode active.

233 Lift Active Lift/lower lever activated at start-up Stop mode active.

234 Reach Active Reach lever has been activated at start-up. Stop mode active.

235 Tilt Active Tilt lever has been activated at start-up. Stop mode active.

236 Side Shift Active Side shift has been activated at start-up. Stop mode active.

239 OPP Active Foot switch has been activated at start-up. Stop mode active.

250 Battery Voltage Battery voltage too high. Check voltage of the battery. Slow mode active.