1 minute read
Starter enclosure............................................................5
___________________________________________________Operation
“START” (conveyor/breaker)
“STOP” (conveyor/breaker)
“MANUAL/OFF/AUTOMATIC” selector switch
circuit breaker lever
“HIGH TEMPERATURE”
The starter enclosure (Fig. 19) is located on the left hand side of the machine and consists of the following machine’s electrical functions:
The “START” pushbutton (when depressed) is used to start the machine and remote power unit electric motor’s.
WARNING! If the “START” conveyor/breaker pushbutton is depressed while the conveyor direction control valve is in either forward or reverse position the conveyor will start running. Ensure that you and other workers are clear of the conveyor (s) before depressing the “START “ conveyor/breaker pushbutton to prevent serious injury or death to you or other workers.
This pushbutton switch (when depressed) stops the electric motor’s on the machine and remote power unit
The “MANUAL/OFF/AUTOMATIC” switch is a three (3) position rotary switch that is used to:
– “MANUAL” - is used to bypass the belt sequence switch.
– “AUTOMATIC” - is used with the belt sequence switch to stop the conveyor/breaker when the outby belt stops.
– “OFF” - shuts down the machine and remote power unit
This lever is used to reset the circuit breaker when it has tripped. If the breaker has tripped, the reset lever must be moved to the “RESET” position first and then to the “ON” position.
The “HIGH TEMPERATURE” light will be illuminated when it detects a high temperature at either one of the hydraulic oil tanks. There are two (2) high temperature switches, one is located on board of the machine at the oil tank and one is on the remote power unit oil tank. If either one detects a high temperature at either oil tank, both motors will shut down and the light illuminated.
The “LOW OIL” light will be illuminated when it detects low oil issue at either one of the hydraulic oil tanks. There are two (2) low oil switches, one is located on board of the machine at the oil tank and one is on the remote power unit oil tank. If either one detects a low oil issue at either oil tank, both motors will shut down and the light illuminated.
