OPERATING INSTRUCTIONS RH 30 F

Inspection and servicing

Fix an instruction sticker (Fig. 3-1:): in the cab, on the hydraulic oil tank and on hydraulically-operated attachment.

Environmentally compatible hydraulic fluid - Sampling

Complete sets are compiled for hydraulic fluid analysis. They contain all necessary parts.

Sets are available from the Terex Germany Spare-Parts Service: Part-No. 1 465 077.

Hydraulic fluid analyses are performed by: WEARCHECK GmbH Bahnhofstraße 75 D-83098 Brannenburg

After 30 - 50 operating hours with environmentally compatible hydraulic fluid, take a sample of the hydraulic fluid. Send this sample in to the above address for analysis. The company will then notify you of the result of the analysis.

Start up the machine. Check level in hydraulic tank according to servicing plan.

The hydraulic fluid may dissolve deposits in the hydraulic system. So change all filters 30 - 50 operating hours after making the change. Make further filter changes according to servicing plan.

Sample the hydraulic fluid after 30 - 50 operating hours and send in for analysis. (See section: "Environmentally compatible hydraulic fluid, sampling").

After this, Terex Germany recommends sending in a sample for analysis every 1000 operating hours or once a year.

It is essential that the hydraulic fluid should be analysed not later than after 3000 operating hours.

The results of the analysis show whether the hydraulic fluid is still serviceable and the changing interval can be extended. In case of questions contact the Terex Germany Service.

Operating Instructions

Inspection and servicing

ENVIRONMENT-FRIENDLY LUBRICANTS AND GEARBOX OILS

2804246

Lubricants for bearings

The machine can be lubricated with an environment-friendly grease.

Environment-friendly grease can be used in the central lubricating system, in all other bearings and in the roller-bearing slewing ring.

BP Biogrease E2 is approved by Terex Germany as an environmentfriendly grease.

Gearbox oils

Environment-friendly gearbox oils are not approved by O&K-Mining for use in the travelling, slewing and pump transfers gearboxes.