OPERATING INSTRUCTIONS RH170 Operation

EMERGENCY STOP switch

The entire electrical system is switched off with the EMERGENCY STOP switches. In an emergency, press the EMERGENCY STOP. The EMERGENCY STOP switches are located:

 in the control column in the driver's cab (31, Fig. 2-23:) and

 in the control cabinet (2, Fig. 2-24:) and

 on the righthand side at the counterweight. This latter one is to operate with the rope (3, Fig. 2-25:).

The electrical system of the excavator can be switched on after the EMERGENCY STOP switches are activated.

 Pull the switches out. The switching pin of the rope operated switch (Fig. 2-25:) must be pushed in.