Boom cylinder 31. T rack

Air - Induction System A. Intake Manifold B. T urbocharger System

Charge Air Cooling System (Intercooler) Catalyst Thermal Reactor System A. Catalytic converter B. Exhaust manifold Fuel Injection System A. Fuel Supply Pump (Common Rail System) B. Injector

Injection Pipe

Common Rail E. Smoke Puf f Limiter F. Speed Timer

Cold Advance Timer

Injection Pump Electronic Control System A. ECU B. Engine Speed / Timing Sensor

Accelerator Position Sensor

Coolant T emperature Sensor E. Atmospheric Pressure Sensor F. Intake Pressure Sensor

Intake Manifold T emperature Sensor

Intake Air Flow Sensor

Common Rail Pressure Sensor Exhaust Gas Recirculation System A. EGR V alve B. EGR Cooler

EGR V alve Opening Rate Sensor Particulate Controls A. Any device used capture particulate emissions. B. Any device used in the regeneration the particulate control device.

Control Device Enclosures and Manifolding

Diesel Particulate Filter T emperature Sensor E. Dif ferential Pressure Sensor Advanced Oxides Nitrogen (NOx) Controls A. Selective Catalytic Reduction (SCR) Catalyst B. Reductant (urea) Containers

Dispensing Systems

NOx Sensor E. SCR T emperature Sensor F. Any Sensor for Diesel Exhaust Fluid Miscellaneous Items A. Closed Breather System B. Hoses*, Clamps*, Fittings, T ubing*

Gaskets, Seals

Kubota supplied engine Wiring Harnesses E. Kubota supplied engine Elec. Connectors F. Air Cleaner Element*, Fuel Filter Element*

Emission Control Information Labels

arranty period is equivalent manufacturer's recommended first replacement interval stated in the applicable model's operator's manual and / service (workshop) manual.

MAINTENANCE REQUIREMENTS

The owner is responsible for the performance the required maintenance defined KUBOT A in the operator ’s manual.

LIMIT A TIONS

This Emission Control System W arranty shall not cover any the following; A. Repair replacement required because misuse neglect, improper maintenance, repairs improperly performed replacements not conforming KUBOT A specifications that adversely fect performance and / durability , and alteration modifications not recommended approved in writing KUBOT A. B. Replacement parts and other services and adjustments necessary for required maintenance and after the first scheduled replacement point.