Basic instructions - Shop and assembly

Safety rules - Personal safety

W ARNING: This symbol indicates a precaution. gives information concerning the safety the dealer and those in the surroundings. Read and understand these precautions thoroughly before performing the work.

Always comply with warnings and precautions avoid any accidents. This section covers information related overall safety . Check whether all warning labels are in place. Additional labels can ordered from Service Parts.

W ARNING: W orking with sloppy clothes clothes with which safety cannot ensured leads damage the machine and injury the operator . Always wear clothes that ensures safety . order work more safely , it is recommended wear additional safety equipment. Helmet, safety shoes, ear protection, goggles, work clothes, and gloves

W ARNING: Check hydraulic equipment. W ork according the procedure. not change the procedure.

W ARNING: Check that there is one in the surroundings before draining the pressure from hydraulic circuits during machine hydraulic cylinder inspection.

W ARNING: Use gloves when handling high - temperature parts.

W ARNING: Bring the lower parts attachments in contact with the ground before inspecting repairing them.

W ARNING: Check that hoses and tubes are securely connected. there is any damage a hose tube, replace it. not check for oil leaks hand. Use cardboard wood.

W ARNING: When removing attachment pin other hardened pin, use a hammer that has a soft head.

W ARNING: W ear eye protection when using a hammer install a pin when working with a grinder . At this time, use goggles eye protectors that meet standards.

W ARNING: Use work site protection when repairing the hammer . Check the oil, coolant, grease, and tools. Recover materials and parts necessary . Pay enough attention safety .

W ARNING: Some the machine's parts are extremely heavy . Use appropriate lifting equipment for such parts. For weights and procedures, see the specification chapter in this manual.

Safety rules - Ecology and the environment

Soil, air , and water quality is important for all industries and life in general. When legislation does not yet rule the treatment some the substances that advanced technology requires, sound judgment should govern the use and disposal products a chemical and petrochemical nature.

Familiarize yourself with the relative legislation applicable your country , and make sure that you understand this legislation. Where legislation exists, obtain information from suppliers oils, filters, batteries, fuels, anti freeze, cleaning agents, etc., with regard the fect these substances man and nature and how safely store, use, and dispose these substances.

Helpful hints

• A void the use cans other inappropriate pressurized fuel delivery systems fill tanks. Such delivery systems may cause considerable spillage. • general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most these products contain substances that may harmful your health. • Modern oils contain additives. not burn contaminated fuels and waste oils in ordinary heating systems. • A void spillage when you drain fluids such used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid, etc. not mix drained brake fluids fuels with lubricants. Store all drained fluids safely until you can dispose the fluids in a proper way that complies with all local legislation and available resources. • not allow coolant mixtures get into the soil. Collect and dispose coolant mixtures properly . • The air - conditioning system contains gases that should not released into the atmosphere. Consult air - conditioning specialist use a special extractor recharge the system properly . • Repair any leaks defects in the engine cooling system hydraulic system immediately . • not increase the pressure in a pressurized circuit this may lead a component failure. • Protect hoses during welding. Penetrating weld splatter may burn a hole weaken hoses, allowing the loss oils, coolant, etc.