Miscellaneous Utilities

Using Boot Sequence Selector

Boot Sequence Selector allows the boot order to be changes without accessing the BIOS. To use Boot Sequence Selector, perform the following steps: 1. Enter into DOS. 2. Execute BS.exe to display the usage screen.

3. Select the desired boot sequence by entering the corresponding sequence, for example, enter BS2 to change the boot sequence to HDD|CD ROM|LAN|Floppy.

Using DMITools

The DMI (Desktop Management Interface) Tool copies BIOS information to eeprom to be used in the DMI pool for hardware management. When the BIOS displays Verifying DMI pool data it is checking the table correlates with the hardware before sending to the operating system (Windows, etc.). To update the DMI Pool, perform the following steps: 1. Enter into DOS. 2. Execute qdmitools.exe. The following messages show dmitools usage:

3. Enter the required key number of the feature required to be modified. See the following table.

Key No. Function Description

1 Enter 1 to modify the Asset Tag 2 Enter 2 to modify the Product Name 3 Enter 3 to modify the Serial Number 4 Enter 4 to modify the 1394 GUID Number 0 Enter 0 to exit the program

Using the LAN MAC Utility

Perform the following steps to write MAC information to eeprom: 1. Use a text editor, for example Notepad, to edit the MAC.CFG file as shown:

• WriteData= '001122334455' <------- MAC value • StartAddr=7A <------- MAC address • WriteLeng=6 <------- MAC value length • KeepByte=0 <------- can be any value 2. Boot into DOS. 3. Execute MAC.BAT to write MAC information to eeprom.