Advanced

The Advanced screen allows the user to configure the various advanced BIOS options. IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unless you have experience adjusting these items, we recommend that you leave these settings at the default values. If making settings to items on these pages causes your system to malfunction or prevents the system from booting, open BIOS and choose Load Optimal Defaults in the Exit menu to boot up normally.

The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter settings.

PhoenixBIOS Setup Utility Information Main Advanced Security Boot Power Exit Item Specific Help USB Self-Healing Use this feature to Secured Setup Configurations: [No] tune USB timing event Reset Configuration Data: [No] for USB devices LPC Port 80: [Enabled] PCI Hot-Plug Resources: [Enabled] I/O: [256] Memory: [2M] Pre-fetchable Memory: [2M] Enable Multimedia Timer: [Yes] Watchdog Timer: [Disabled]

Hammer Configuration Integrated Devices PnP Configuration IDE Configuration iGPU - Chipset LCD Panel type: [EDID compliant]

F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults ESC Exit ←→ Select Menu Enter Select Sub-Menu F10 Save and Exit

Parameter Description Submenu Items

USB Self-Healing Enter the USB Self-Healing menu. • Self-Healing OCHI Self-Healing EHCI Self-Healing

Secured Setup Configuration Reset Configuration Data Prevents Plug and Play devices from changing system settings. Clear the Extended System Configuration Data (ESCD) area using this option. N/A

N/A

LPC Port 80 Enable or Disable LPC Port 80. N/A PCI Hot-Plug Resources Enable or Disable Hot-Plug support. N/A I/O Set the amount of I/O (in bytes) available to the Hot-Plug slots. N/A Memory Set the amount of Memory (in bytes) available to Hot-Plug slots. N/A

Pre-fetchable Memory Set the amount of Pre-fetchable Memory (in bytes) available to the Hot-Plug slots. N/A

Enable Multimedia Timer Enable [Yes] or Disable [No] Multimedia Timer support. N/A

Watchdog Timer Disable or Enable the OS Watchdog Timer using ACPI WDAT. N/A

Hammer Configuration Enter the Hammer Configuration menu. • HT-LDT Frequency • HT-LDT Width • DDR2 Memory Frequency • LS Table loading • ISO Flow Control • Hi Priority Channel • Display Refresh • Sync Flood Detection

Integrated Devices

Enter the Integrated Devices menu. • USB Control • USB2 Control • USB BIOS Legacy Support • MAC LAN • Azalia Codec • Integrated Codec • SATA Mode • SATA AHCI Mode • SATA Hotplug • Power on options • Interrupt Mode • PCI Express MSI • S5 WOL • Software Based PMU FW Loading • SMU • Dynamic Crush Voltage • PMU iGPU Stutter Mode • PMU System Stutter Mode • PMU LMM Mode • Dynamic FPCI Clock PnP Configuration Enter the PnP Configuration menu. PCI Device, Slot #1 PCI/PNP ISA UMB Region Exclusion PCI/PNP ISA IRQ Resource Exclusion IDE Configuration Enter the IDE Configuration menu. • Large Disk Access Mode • Local Bus IDE adapter Primary Master Primary Slave iGPU - Chipset Enter the iGPU - Chipset menu. • Integrated Graphic • Video Memory • Hybrid Graphics • mGPU nPW • MXM LVDS/TV • MXM CRT/DVI

LCD Panel type Select the correct LCD panel type for testing purposes. N/A