Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery.

NOTE: The screen above is for your reference only. Actual values may differ. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. InsydeH20 Setup Utility Rev. 3.5 Information Main Security Advanced Power Boot Exit

System Time: System Time: System Date: System Date:

Total Memory: Total Memory: Video Memory: Video Memory:

Quick Boot Quick Boot Network Boot Network Boot F12 Boot Menu F12 Boot Menu D2D Recovery D2D Recovery SATA Mode SATA Mode Display Mode Display Mode [19:10:59] [19:10:59] [01/09/2009]

4095 MB 512 MB

[Enabled] [Enabled] [Disabled] [Enabled] [AHCI] [iGPU] ItemSpecificHelp

This is the help for the hour field. Valid range is from 0 to 23. INCREASE/REDUCE: F5/F6

F1 ESC Help Exit Select Item Select Menu F5/F6 Enter ChangeValues Select SubMenu F9 F10 SetupDefault SaveandExit

Parameter Description Format/Option

System Time Sets the system time. The hours are displayed with 24hour format.

Format: HH:MM:SS (hour:minute:second) System Date Sets the system date. Format MM/DD/YYYY (month/day/year)

System Memory This field reports the memory size of the system. Memory size is fixed to 2047 MB. Video Memory This field reports the memory allocated for video graphics. Memory size is fixed to 64 MB. Quick Boot Allows startup to skip certain tests while booting, decreasing the time needed to boot the system. Network Boot Enables, disables the system boot from LAN (remote server). F12 Boot Menu Enable the Press <F12> to display Boot Menu message during boot. D2D Recovery Enables, disables D2D Recovery function. The function allows the user to create a hidden partition on hard disc drive to store operation system and restore the system to factory defaults. SATA Mode Control the mode in which the SATA controller should operate. N/A

N/A

Option: Enabled or Disabled Option: Enabled or Disabled Option: Enabled or

Disabled

Option: Enabled or Disabled

Option: AHCI or IDE

Display Mode Configures the mode of operation for the display Option: iGPU or ?