Replacing the Hard Disk Drive Module

1. Place the HDD into the carrier.

2. Insert the four screws (two each side) to secure the hard disk to the carrier. Carrier screw holes have been numbered 1-4. Insert the screws in numerical order: 1, 2, 3, 4.

Step

Size

HDD Carrier M3*3 4

Quantity Screw Type

4. Slide the HDD in the direction of the arrow to connect the HDD to the SATA interface connector.

5. Insert the two screws to secure the HDD Module in place.

Step

Size

HDD Module M2.5*4 2

Quantity Screw Type