Power

The Power screen allows the user to configure CPU and power management options.

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. InsydeH20 Setup Utility Rev. 3.5 Information Main Security Advanced Power Boot Exit

Advanced CPU Control ItemSpecificHelp

ACPI S1: ACPI S3: Wake on PME Auto wake on S5 [Disabled] [Enabled] [Enabled] [Disabled] These items control various CPU parameters.

F1 ESC Help Exit Select Item Select Menu F5/F6 Enter ChangeValues Select SubMenu F9 F10 SetupDefault SaveandExit

Parameter Description Submenu Items

Advanced CPU Control

Enter the Advanced CPU Control menu. • IST Configuration • Thermal Mode • CMP Support • Use NX capability • C-State support • Enhanced C-States Enable • Pop Up Support • Pop Down Support • Hard C4E • Bi-directional PROCHOT# • ACPI 3.0 T-States • DTS Enable • Thermal Trip Points Setting (Throttle On Temp.) ACPI S3 Enable or Disable ACPI S1/S3 Sleep State. N/A ACPI S3 Enable or Disable ACPI S1/S3 Sleep State. N/A Wake on PME Disable or Enable wake up when the system power is off and a PCI Power Management Enable wake up event occurs. N/A Auto wake on S5 Disable or Enable auto wake up by date and time or at a fixed time everyday. N/A