Removing the LCD Module

8. Carefully insert the flat-blade screwdriver under the side of the media board cover and gently pry up the board until it releases from the cover. 9. Remove the media board.

1. See “Removing the Battery Pack” on page 53. 2. See “Removing the Lower Cover” on page 55. 3. See “Removing the Keyboard” on page 64. 4. See “Removing the Middle Cover” on page 65. 5. Disconnect the microphone cable from the mainboard.

7. Pull out the antenna cables as shown.

8. Turn the system over and remove the two screws (F) from the base of the unit.

Step Size (Quantity) Color Torque 1~2 M2.5 x L8 (2) Black 4.0 kgf-cm