CYLINDER BLOCK.......................................................................................................................................................A2

Checks/Adjustments

Accelerator control adjustment

A

Make sure that: 1- The adjustment measurement (A) satisfies the following 2 conditions: - The pedal shoe effort must be between 3 and 5 daN. - The pedal must return easily to the high position.

161msm05

2- The angular detector values: - Raised pedal (in idling speed stop): Maximum 0,9 V. - Pedal fully depressed: Minimum 3,1 V. The voltage will be measured with ignition switched on. Use the cable n° 60 05 005 577 to measure the output voltage.