Brakes

FASTENER USAGE

DESCRIPTION - FASTENER USAGE

WARNING:USEOFANINCORRECTFASTENER MAYRESULTINCOMPONENTDAMAGEORPERSONALINJURY.

Figure art, specifications and torque references in thisServiceManualareidentifiedinmetricandSAE format.

During any maintenance or repair procedures, it is important to salvage all fasteners (nuts, bolts, etc.) for reassembly. If the fastener is not salvageable, a fastener of equivalent specification must be used.

DESCRIPTION - THREADED HOLE REPAIR

Moststrippedthreadedholescanberepairedusing a Helicoil . Follow the manufactures recommendations for application and repair procedures.

INTERNATIONAL VEHICLE CONTROL AND DISPLAY SYMBOLS

DESCRIPTION - INTERNATIONAL SYMBOLS

The graphic symbols illustrated in the following InternationalControlandDisplaySymbolsChartare used to identify various instrument controls. The symbols correspond to the controls and displays that are located on the instrument panel.

INTERNATIONALSYMBOLS

1 HighBeam 13 RearWindowWasher 2 FogLamps 14 Fuel 3 Headlamp,ParkingLamps,PanelLamps 15 EngineCoolantTemperature 4 TurnWarning 16 BatteryChargingCondition 5 HazardWarning 17 EngineOil 6 WindshieldWasher 18 SeatBelt 7 WindshieldWiper 19 BrakeFailure 8 WindshieldWiperandWasher 20 ParkingBrake 9 WindscreenDemistingandDefrosting 21 FrontHood 10 VentilatingFan 22 Rearhood(Decklid) 11 RearWindowDefogger 23 Horn 12 RearWindowWiper 24 Lighter

METRIC SYSTEM

DESCRIPTION - METRIC SYSTEM

The metric system is based on quantities of one, ten, one hundred, one thousand and one million .

The following chart will assist in converting metric units to equivalent English and SAE units, or vise versa.

CONVERSION FORMULAS AND EQUIVALENT VALUES

MULTIPLY BY TOGET MULTIPLY BY TOGET in-lbs x0.11298 =NewtonMeters(N·m) N·m x8.851 =in-lbs ft-lbs x1.3558 =NewtonMeters(N·m) N·m x0.7376 =ft-lbs InchesHg (60°F) x3.377 =Kilopascals(kPa) kPa x0.2961 =InchesHg psi x6.895 =Kilopascals(kPa) kPa x0.145 =psi Inches x25.4 =Millimeters(mm) mm x0.03937 =Inches Feet x0.3048 =Meters(M) M x3.281 =Feet Yards x0.9144 =Meters M x1.0936 =Yards mph x1.6093 =Kilometers/Hr.(Km/h) Km/h x0.6214 =mph Feet/Sec x0.3048 =Meters/Sec(M/S) M/S x3.281 =Feet/Sec mph x0.4470 =Meters/Sec(M/S) M/S x2.237 =mph Kilometers/ Hr.(Km/h) x0.27778 =Meters/Sec(M/S) M/S x3.600 Kilometers/Hr. (Km/h)

COMMON METRIC EQUIVALENTS

1inch=25Millimeters 1CubicInch=16CubicCentimeters 1Foot=0.3Meter 1CubicFoot=0.03CubicMeter 1Yard=0.9Meter 1CubicYard=0.8CubicMeter 1Mile=1.6Kilometers

Refer to the Metric Conversion Chart to convert torque values listed in metric Newton- meters (N·m). Also, use the chart to convert between millimeters (mm) and inches (in.)