Mitsubishi Large IC Pneumatic (FD70N1)

PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS

THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS

EXPECT PRODUCTIVITY.

EXPERIENCE ENHANCED PERFORMANCE WITH A POWERFUL LOW-EMISSIONS ENGINE.

• • • •

Outstanding power and performance Fuel-efficient engine Durable steel frame for rugged applications Greater uptime, less maintenance

The FD70N1 delivers the power and performance that tough applications demand.

Excellent Fuel Efficiency: The FD70N1 delivers excellent fuel efficiency with superior dependability. The high-performance Perkins™ 854F, turbocharged, four-cylinder engine was engineered for reduced fuel consumption – delivering an 18% increase in efficiency over the previous generation*. Compact in size, these engines provide the power of a 5.0L engine in a more efficient 3.4L package, while still meeting and exceeding today’s rigorous Tier 4 Final emissions standards.

Exceptional Performance, Exceptional Value: Mitsubishi Forklift Trucks developed the FD70N1 to deliver everything you need to tackle tough jobs every day – and at an exceptional value. From a durable design to a fuel-efficient and high-performance engine, the FD70N1 is ready to work when you are.

High Performance: When you need power, you need it now. The FD70N1 features a powerful, compact turbocharger and precise torque converter – allowing for controlled, powerful acceleration when driving up ramps or moving heavy pallets outdoors.

Durable Frame: Rough applications require tough equipment. The FD70N1 consists of a steel frame for added strength and durability: • More steel in the frame for added resilience • Rugged design helps minimize stress points in the frame * Based on preliminary test results; levels may vary depending on application.

Key applications: • Lumber • Stone and glass

• Fabricated metals • Industrial machinery

• Building materials • Garden supplies

Proven Performance The Tier 4 Final Approach: Features a compact Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SRC) aftertreatment solution that meets or exceeds U.S. EPA Tier 4 Final standards. This technology is designed to be maintenance free for the life of the engine.

Maintenance Made Simple: Simplified maintenance means less downtime and more time on the job. Whether it’s scheduled maintenance or a daily inspection, the FD70N1 makes it easier to get back to work.

• Easy-to-remove floor panel and steel side covers; no tools required • Greater uptime and lower planned maintenance costs • Easy access to all major components • Less time consuming daily inspections • Extended 500-hour service intervals

Engine Protection: Regulated by the Vehicle Control Module, the Engine Protection System keeps the truck running at desirable levels while helping to reduce the risk of damage to the forklift, saving you money. If vital fluids become critically low,

or fluid temperatures are too high, RPM levels are automatically lowered and the operator is notified by a light on the dash display.

THE COMFORT YOUR OPERATORS DESERVE.

COMBINED WITH THE CONTROL YOUR BUSINESS DEMANDS.

Invaluable standard features: • Full-suspension vinyl seat for enhanced comfort • LED / LCD display panel for operator awareness • Integrated Presence System (IPS) for added security • Optional intuitive fingertip controls for optimal control

Premium Display Panel: The LED and LCD display panel provides important indicator lights and information to the operator. These indicators help keep the operator informed about the current status of the forklift, whether it’s as simple as the amount of fuel in the truck or something more complex such as an issue with oil pressure or fluid temperatures.

Front-End Attachments: The FD70N1 can be further customized to meet the demands of your business with optional front-end attachments, such as sideshifters or fork positioners. Ask your local Mitsubishi forklift truck dealer for more information.

Less Noise, Greater Comfort: The FD70N1 is built for added operator comfort.

Standard design features such as rubber mounted major components, a fully-insulated steel engine hood, helical transmission gears and fully-enclosed wheel wells all work together to create a smooth driving experience.

Comfortable Ride: The FD70N1 is equipped with a full-suspension vinyl seat, providing day-long comfort to operators of all sizes: • Forward and backward adjustment up to 6.5” • Suspension adjustment conforms to the operator • Lower back lumbar adjustment • Fold down pin allows for easy access to the engine compartment during daily checks and maintenance • An optional cloth seat is also available for operators working long shifts or on rough surfaces Integrated Presence System (IPS): This system activates whenever the operator does not fasten the seat belt during operation or leaves the normal operating position without activating the parking brake. This integral computer-based feedback system uses both audible and visual indicators to alert the operator and increase operator awareness.

Cab Option To Meet Your Needs: For harsh or demanding outdoor applications, the optional cab package can be added to the FD70N1 for further protection.

Features • Front windshield with wiper and washer • Top panel • Roof headliner • Dome light • Operator and defogger fan

• Rear windshield with wiper and washer • Right and left steel door with sliding window • Steel coat hook • Cabin heater

CHARACTERISTICS 1 Capacity at rated load center 2 Capacity at load center – distance 3 Power – electric, diesel, gasoline, LP gas 4 Tire type – cushion, pneumatic 5 Wheels (x=driven) number front / rear DIMENSIONS 6 Maximum fork height (top of fork)[1] 7 Free fork height [1] 8 Forks – thickness x length x width [1] 9 Fork spacing – out-to-out minimum / maximum 10 Tilt – forward / backward 11 Length to fork face 12 Width with dual drive tires 13 Height with lowered mast [1] 14 Seat height 15 Height to top of overhead guard 16 Height with extended mast [1] 17 Minimum outside turning radius 18 Load moment constant 19 Minimum aisle – 90° stack – zero clearance without load PERFORMANCE 20 Travel speed loaded / empty 21 Lift speed loaded / empty 22 Lowering speed loaded / empty 23 Drawbar pull – loaded at 1 mph (1.6 km) 24 Drawbar pull –loaded at maximum 25 Gradeability – loaded at 1 mph (1.6 km) 26 Gradeability – loaded at maximum WEIGHT 27 Empty 28 Axle load – with rated load front / rear 29 Axle load – without load front / rear CHASSIS 30 Tire size – front, standard duals 31 Tire size – rear 32 Wheelbase 33 Tread width – front, standard duals 34 Tread width – rear 35 Ground clearance – at lowest point at mast 36 Ground clearance – at center of wheelbase 37 Service brake 38 Parking brake POWERTRAIN 39 Engine model 40 Continuous output S.A.E. gross 41 42 Maximum torque S.A.E. gross 43 44 Cylinder / displacement 45 Transmission type 46 Number of speeds forward / reverse 47 Battery 48 Relief pressure for attachments 49 Noise level – at operator’s ear Leq

FD70N1

lb in

kg mm

15,500 24

7,000 600 diesel pneumatic 4x / 2

in in in in

mm mm mm mm

120.5 7.9 2.4 x 48 x 5.9 11.8 / 63.0

in in in in in in in in in

mm mm mm mm mm mm mm mm mm

141 85.4 101.5 62.7 103 168.5 130 23.0 153

3,580 2,170 2,570 1,592 2,610 4,277 3,310 585 3,895

mph fpm fpm lb lb

km/h m/s m/s N N

16.2 / 18.0 92.5 / 96.1 98.4 / 98.4 8,900 11,960

26.0 / 29.0 0.47 / 0.49 0.50 / 0.50 39,600 53,200

deg

6° / 12°

% % lb lb lb

25 35 kg kg kg

20,990 32,730 / 3,760 9,280 / 11,710

in in in in in in in

3,060 200 60 x 1,220 x 150 300 / 1,600

9,520 14,820 / 1,700 4,210 / 5,310 8.25-15-12PR 8.25-15-12PR

mm mm mm mm mm

90.6 65.0 65.0 6.7 10.4

2,300 1,650 1,650 170 263 hydraulic with vacuum boost hand, mechanical Perkins 854F

HP kW at r.p.m. lb-ft N-m at r.p.m. cu in L

volts psi bar dB(A)

100.6

75 2,480

218

296 1,400

4 / 207.5

4 / 3.4 powershift 2/2 12

2,770

191 86.5

SAFETY STANDARDS These trucks meet American National Standards Institute/ Industrial Truck Standards Development Foundation, ANSI/ITSDF B56.1. Users should be aware of, and adhere to, applicable codes and regulations regarding operator training, use, operation and maintenance of powered industrial trucks, including: • ANSI/ITSDF B56.1.

• NFPA 505, fire safety standard for powered industrial trucks – type designations, areas of use, maintenance, and operation.

• Occupational Safety and Health Administration (OSHA) regulations that may apply.

Specifications, equipment, technical data, photos and illustrations based on information at time of printing and subject to change without notice. Some products may be shown with optional equipment.

[1] Heights with shaft type forks on a standard two-stage mast. Optional hook type forks will change dimensions slightly.

Call-out numbers shown in the diagram below correspond to the first column of the specifications chart.

10

10

F D7 0N 1

13

15

6

16 14

2

7

36 8

35 18

32 11

8

9

34

12

33 8

17

FD70N1

15,500 LB CAPACITY PNEUMATIC TIRE FORKLIFT

Exceptional Value More Than 296,000 Parts To Keep You Running Mitsubishi Forklift Trucks offers several parts programs, all designed to bring you top performance and convenience for your material handling needs. Contact your local dealer to put our services to work for you.

Support To Fit Your Operation Find out why more companies are relying on Mitsubishi forklift truck dealers to keep their fleet operating at top performance.

Our efficiency provides customers with a better return on investment, and qualified service technicians, diverse parts inventory and unparalleled selection of service options can help reduce your total cost of ownership.

Extensive Dealer Network The Mitsubishi forklift truck dealer network is dedicated to finding the right forklift solution for your business. With more than 300 dealer locations, you can rely on your local dealer to provide the service you need when you need it most.

© 2018 MCFA. All rights reserved. All registered trademarks are the property of their respective owners.

Some products may be shown with optional equipment.

MECV0203

04/18

Manufactured with superior quality and exceptional value, Mitsubishi forklift trucks are supported by an extensive dealer and field support network located throughout North and South America. Don’t forget to ask your local Mitsubishi forklift truck dealer about details on factory retail programs, financing plans and additional options and dealer services like planned maintenance and operator training.