Reveal - Medit Integration Guide

DDX Integration: Setup with Medit Link REQUIREMENTS 1. DDX Practice Account. Sign up at: https://ddxdental.com/signup 2. Medit Link Doctor Account. Sign up at: https://www.meditlink.com/register 3. Medit Link Software Installed (Version 2.6.2 or higher) Note: Ensure pop-up blockers are disabled for the DDX website.

ENABLE MEDIT ADD-ON: Step 1 Open a web browser and login to your DDX Practice Account https://www.ddxdental.com/login

Step 2 Click the practice menu (top-right) and click “Store”.

Step 3 Scroll to the section called Medit Link and click “Enable”.

Step 4 Click “configure your add-on”.

Step 5 Click “Authorize with Medit”.

Step 6 Once the Medit Link login window appears, enter your Medit Link login credentials, and click “Sign in”.

Step 7 You will see a message “Medit user account connected successfully" if the integration was successful.

Note: The DDX and Medit Link connection expires after 30 days, however you will be prompted to refresh the integration when needed.

DDX Integration: Export Medit Link Case REQUIREMENTS Before you begin, you must have linked your DDX Practice Account with your Medit Link account. Refer to page 1 for DDX Integration: Setup with Medit Link instructions.

Note: Ensure pop-up blockers are disabled for the DDX website.

EXPORT MEDIT LINK CASE TO DDX: Step 1 Launch the Medit Link Software.

Step 2 Click on the case to export.

Step 3 Click the DDX button at the top-right.

Step 4 The default web browser will launch.

If your DDX session has expired, you will be required to login to your DDX Practice account.

Step 5 The Requesting Case from Medit Link screen will display.

Step 6 If you are connected to more than one dental lab, you will be presented a prompt to select which dental lab you wish to send the case to. Select the Reveal Aligner Lab from the pull down list.

Note: If you are connected to only one dental lab, this step is skipped.

Step 7 Click “Assign”.

Step 8 The scan file upload window will appear.

Once the file upload is complete, close the file upload window (click the “X” at the top-right of the window).

Step 9 Confirm and/or edit the patient details (these are provided and auto-filled in based on the patient details saved in Medit Link).

Step 10 Select the procedure you wish to order by clicking “Add Procedure” (or use the “Procedures” pull down button to see a more detailed list of the procedures offered by the lab).

Step 11 The selected procedure attributes will appear. Complete the procedure section, ensuring all fields with a red “*” are completed.

Step 12 Confirm the scan files from Medit are shown under the “Case Files” section.

You may add additional digital files (photographs, x-rays, etc.) by clicking the “Upload” button.

Step 13 Add a case note in the “Notes” section (this step is optional).

Step 14 Accept the Terms and Conditions (if shown).

Step 15 Click “Submit Case”.

Step 16 Your lab case is complete and has been sent digitally to your lab, including the Medit scan files.

Note: The case number and Return Date are shown once the case has been submitted.

For more information on our products and educational offerings, please contact us: RevealProviders.com | HenryScheinOrtho.com | Tel: 800.344.3397 Ortho Organizers, Inc.1822 Aston Ave. Carlsbad, CA 92008-7306 USA © 2022 Ortho Organizers, Inc. All rights reserved M2635