Cassava grinding machine

Cassava grinding machine The cassava grinding machine for sale is independently developed by our Doing company. It is widely used in the production of cassava and beans. The grinding mainly breaks the raw material and achieves the crushing effect. The bearing adopts the imported SKF series and the cooling bearing is circulated with cooling water to prolong the life of the bearing, and it has the advanced nature in China. The machine has imported net screen, oil seal belt and titanium alloy screen, the grinding machine can break the combination of starch. It is easy and convenient to replace parts without special tools. It is used for garri processing line.

Cassava grinding machine function

In the production of cassava starch and cassava flour, cassava grinding machine for sale is a main product that directly affects the extraction rate of starch. This cassava grinding machine also widely used in the garri processing plant. Many peer companies generally use hammer crushing and low speed cable miller to break the fresh cassava. The defects of these two kinds of equipment are small treatment and low breakage rate, which cannot meet the requirements of high yield and good quality. The advantages of high speed new high efficiency cassava grinding machine for sale: on the one hand, to improve the preservation of starch granules and fiber structure, on the other hand, the grinding rate and quality of starch are guaranteed.

Structural characteristics of the cassava grinding machine for sale: 1. All stainless steel structure, direct connection without conveyor belt loss; 2. The diameter of the drum is large, the number of blades is large, and the replacement cycle is long.

3. The crushing path is long, few fine fiber, the cell organization is broken thoroughly, and the starch free rate is as high as 98%.

4. With two knife holders, the drum can be rotated in two directions, which greatly improves the service life of the blade.

5. The special structure of the dovetail groove on the drum surface is convenient and quick to replace the blade without special tools.

Doing Company cassava grinding machine under manufacturing

Here is a brief introduction to the working principle of the cassava grinding machine for sale: The cassava to be processed enters a grinding machine through a speed regulating spiral conveyer from the cleaning machine. The cassava can be sent to the high-speed rotating rasp rotor continuously and steadily. The saw bar and its clamping device are flung to the outer edge because of the centrifuge's action. The sawing peak is convex out of the grinding rotor surface. The cassavas were then grinded and rasped, and the grated cassava paste reached the screen.

The function of the cassava grinding machine for sale sieves was to prevent the uncrushed cassava chips from coming out of the machine.

After the saw blade is blunt, the wear time is the shortest, because the clamping structure and assembly mode of the saw strip are completely changed, thus saving the strength and time and increasing the labor productivity. The saw blade is the most easy to wear out of the parts of the cassava grinding machine for sale. In addition, multiple replacement of the saw blade is necessary in the continuous production process. So our cassava grinding changing institution is convenience and simple, because we structure design of the

converter installed only need open the machine cover can replace the saw blade.

Free enquiry: Whatsapp: +86 135 2661 5783 Email: sales@doinggroup.com http://www.cassavaprocessing.com http://www.cassavaprocessingplant.com