Professional Electrician & Installer July/August 2022

001_PE_JUL-AUG22 14/06/2022 15:10 Page 1

TO EE FR DE RA ET TH

PROFESSIONAL

ELECTRICIAN THE BUSINESS MAGAZINE FOR THE ELECTRICAL TRADE

& INSTALLER

JULY/AUGUST 2022

PUSH-TO-FIT ON A BUDGET! WHY HAMILTON’S HARTLAND G2 DELIVERS WITHOUT COMPROMISE

TEST EQUIPMENT & TOOLS IS YOUR EQUIPMENT MEASURING UP TO MODERN DEMANDS? ALSO IN THIS ISSUE: TECHNICAL ADVICE l NEW PRODUCTS l INDUSTRY NEWS l REVIEWS AND MORE...

PE Page Grid_Layout 1 07/06/2022 08:58 Page 1

003_PE_JUL-AUG22_Layout 1 15/06/2022 16:20 Page 1

Total Average Net Distribution: 76,995 Certification period: 1 January 2021 - 31 December 2021

July/August 2022 Volume 38 No.7

Regulars 5 VIEWPOINT 7 NEWS 20 THE ROAD TO NET ZERO 22 CODEBREAKERS 39 BUSINESS MATTERS 50 MADE 2 MEASURE 70 PRODUCTS IN PRACTICE 79 CAPTAIN C-TEC 80 CAUGHT ON CAMERA

63

News & Views 15 Reflecting on the journey of the Building Safety Bill and how it will impact the construction industry in the future

How you and your customers can ‘outmsmart’ the cost-of-living-crisis

COVER STORY

18 We learn why the Hartland G2 range by Hamilton Litestat is every electrical installer’s answer if they want a quality finish on a budget

Technical & Training

Test Equipment & Tools

Products & Business Solutions

25 Considering the several methods

41 Full guidance to ensure the safe

57 How do the new smart charging

that may be used to determine an appropriate diameter of conduit for the installation of conductors

29 Discussing energy efficiency and electrical installations

testing of EV charging points

44 Taking a look at some of the lesser known causes of errors when testing

46 Why proving dead effectively

32 A look at the changes in surge protection requirements with the introduction of Amendment 2

35 Following the announcement of new legal responsibilities for building dutyholders, we look at behaviours as an aspect of competence

and safely is vital for electrical operators

48 The key features you should be looking for in a thermal imaging camera

49 Should you test an SPD? 51 The value of energy monitoring

20

and measuring equipment as the demand on electrical systems continues to increase

54 Reviewing the Ideal 61-347 Digital Multi Meter

Prize Draw The Road to Net Zero starts at home

16 WIN! Bag yourself a Fort Smart Alarm Kit from ESP

regulations work?

58 Snickers Workwear’s LiteWork shorts get the product review treatment

60 The key benefits of fibreglass ladders and why they are a great choice for installers working in diverse environments

63 Some of the ways that you and your customers can ‘outsmart’ the cost-of-living crisis

64 How can you become a smarter installer?

67 Cable management: the benefits of using the right tools for the job

68 Highlighting the latest improvements to the BG Storm outdoor socket range

73 Rounding-up the latest products, tools and equipment to help you in your work

PROFESSIONAL ELECTRICIAN July/August 2022 3

PE Page Grid_Layout 1 07/06/2022 09:04 Page 1

005_PE_JUL-AUG22_Layout 1 15/06/2022 15:16 Page 5

@proelectrician

professionalelectrician

Digital Manager REBECCA MCGEOCH email: rmcgeoch@hamerville.co.uk Digital Assistant ADAM ROBERTS email: aroberts@hamerville.co.uk Advertisement Manager ANTHONY SCOTT email: ascott@hamerville.co.uk Assistant Advertisement Manager IAN TURNER email: ianturner@hamerville.co.uk Design ADEEL QADRI Production Assistant KERRI SMITH Group Production Manager CAROL PADGETT Distribution Manager KARL CLARK Managing Editor TERRY SMITH Printed by: WALSTEAD PETERBOROUGH Published by: HAMERVILLE MEDIA GROUP Regal House, Regal Way, Watford, Herts, WD24 4YF Tel: 01923 237799 Fax: 01923 246901 Email: pe@hamerville.co.uk PROFESSIONAL ELECTRICIAN is the business journal for the electrical contracting industry. It is available to the trade at leading electrical wholesalers throughout the UK. © 2022 Subscriptions to PROFESSIONAL ELECTRICIAN are available. Please contact us for rates.

Image References (Adobe Stock): Pg 15 Accountability © Tasha Tuvango Pg 20 House Floods © Fresh Ideas Pg 29 Energy Efficiency © New Africa Pg 32 Lightning Strike © Sergey Nivens Pg 35 Team Meeting © Manit Pg 44 Spirit Level © PhotoDuets Pg 45 Accuracy © Fontriel

Professional Electrician, Regal House, Regal Way, Watford, Herts, WD24 4YF

Editor’s Viewpoint

Meet the team Editor RICHARD BOWLER email: pe@hamerville.co.uk

pe@hamerville.co.uk

Government can’t let this opportunity go to ‘waste’

i

t’s been a particular hobby horse of ours for years, of course, but finally there are signs that this one at least could finally be destined for the knacker’s yard.

Or more appropriately, perhaps, that it should be sent to the local recycling centre, because it’s been announced recently that fees to dispose of certain types of building waste could be scrapped.

Consultation documents published by the Department for Environment, Food and Rural Affairs (DEFRA) propose scrapping charges for getting rid of small quantities of rubbish such as shed or fence panels, tiles, plasterboard, and paving slabs.

It seems that the government has finally woken up to the fact that the big stick approach to recycling isn’t necessarily the holy grail for a better world, and that a more relaxed approach will actually save local councils much needed cash in the long run.

Paradoxically, the change of mood seems to be the result of one of the consequences of the pandemic, which has seen an explosion in home and garden improvements these past two years.

Good news on many levels but, unfortunately, even the smallest DIY project creates waste which needs to be disposed of and faced with unprecedented queues – and a bewildering scale of fees for various types of rubbish – some unscrupulous members of the public invariably choose to dump their waste down quiet country lanes and local beauty spots.

Apart from the obvious risk to life and limb, of course, there is the not inconsiderable time and resources invested by local authorities to remove this unsightly and potentially verminous waste from blighting our communities.

In fact, in 2021 local councils recorded a mind blowing – but almost certainly conservative – one million incidents of fly tipping, and those appalling numbers show no sign of abating despite the return to some semblance of normal post-COVID life.

Not all of the blame can be laid at the door of anti-social home improvers, of course. Unfortunately, we’re only too aware of those who operate on the fringes of our own industry and will cut all manner of corners to secure a contract for lucrative renovations and repairs.

Doing away with a skip, or ignoring the legal requirement to secure an appropriate waste licence, or commercial vehicle permit, can be the difference between winning a job or not. It should also immediately ring alarm bells amongst potential customers who should never be afraid to ask probing questions about where their waste will end up.

Perhaps it’s too much to ask, but a bit of common sense at the recycling centres really wouldn’t also go amiss. In our experience the whole process varies tremendously from one depot to another with some staff adopting a very different stance with certain items.

Overzealous enforcers seem to view the casual visitor with deep suspicion as though, instead of being a responsible member of society, they’re somehow trying to get one over the system.

And who considered it was a good idea to charge an annual fee of £40 for green waste wheelies? The only thing that has achieved is the proliferation of something we thought had long been condemned to the dustbin – backyard bonfires and all the implications that has for a cleaner environment.

Hopefully, this new document will see the light of day and bring in a much lighter touch to the whole process of rubbish disposal. It’s a rare opportunity to right a growing wrong and one that none of us can afford to quite literally let go to waste.

Have a good summer and we’ll see you again in September.

Richard B owler PROFESSIONAL ELECTRICIAN July/August 2022 5

PE Page Grid_Layout 1 12/05/2022 08:18 Page 1

007_PE_JUL-AUG22_Layout 1 15/06/2022 15:24 Page 7

news @proelectrician

For the latest electrical news visit www.professional-electrician.com

professionalelectrician

pe@hamerville.co.uk

Professional Electrician, Regal House, Regal Way, Watford, Herts, WD24 4YF

ESR leaflets help to explain Electricity at Work Regulations The Electrical Safety Roundtable in the Workplace Group has worked collaboratively to create two new technical summary leaflets to promote a better understanding of the Electricity at Work Regulations 1989 (EWAR).

The leaflets have been produced in collaboration with over 25 different organisations after concerns were raised about the lack of understanding and compliance seen within workplaces in relation to managing electrical safety.

It was suggested that this may be because of the multitude of complex and overlapping Regulations which can make it challenging to understand what is needed, which is what these freely available leaflets have been created to assist with.

The initial two summaries are the first of

many to be part of an extensive collection of technical advice documents and summaries of important Regulations to enhance electrical safety. The first leaflet provides a three-page overview of the EAWR and the second focuses on Systems. It is hoped that the leaflets will be welcomed as useful resources for raising awareness of the importance of the EAWR and enhance compliance with them.

Commenting on the leaflets, Paul Meenan, ESR Workplace Chair, said: “Often these complex Regulations are skimmed through or overlooked, and these leaflets provide a great overview and starting point for understanding the full Regulations. As a group we hope these leaflets will add to an ever-increasing culture of enhanced health and safety in workplaces.”

ACCESS THE TECHNICAL SUMMARIES AT: WWW.RDR.LINK/EAI001

ESP fires up its training programme schedule Contractors and wholesalers are invited to take advantage of ESP’s free training sessions, which have returned to the company’s Midlands-based head office.

There are two separate training programmes available. Training course 1 is a one-day ESP Product Overview and up to 12 candidates can be accommodated. It provides an overview of ESP’s core product categories – Smart Security, CCTV, Access Control, EVAC, Fire Protection, Emergency Lighting and Sangamo timers and controls – with full features and benefits covered.

The aim is to simplify the installation process, demonstrating ease of set-up and programming, with live demonstrations of working systems incorporated into the session. Technical support is also covered. All candidates completing the training programme will be issued with an attendance certificate.

Training course 2 is the ESP Addressable Fire System Programming.

This is aimed at competent contractors that already have a good knowledge of installation and regulatory requirements, when it comes to fire system installation.

The session is practical based, with a supporting presentation, and the aim is to help the installer with the final

programming of the ESP system. The course is completed in a single day, with each candidate supplied with their own copy of the PC programming software, as well as a certificate for the attendance of the MAGPRO Addressable Fire Programming course.

As part of its continuing commitment to investing in technical resource capabilities, Scolmore has also announced the appointment of a new Technical Engagement Engineer – Tim Benstead, Chartered Engineer and member of FSH12 and FSH12/1 (BSI committees for fire detection and alarm systems) and the Chairman of JPEL64/B responsible for thermal effects relating to BS 7671.

Katie Plumstead, Scolmore’s Group Marketing Manager, said: “We’re delighted to have Tim on board. For Scolmore, contractor engagement has a vital role to play in helping us to gain constructive insight into how contractors like to work, the issues they face and what they need to help them do their

work in the most time-efficient and cost-effective way.”

GET FURTHER INFORMATION ON ESP TRAINING COURSE DATES AT: WWW.RDR.LINK/EAI002

PROFESSIONAL ELECTRICIAN July/August 2022 7

007_PE_JUL-AUG22_Layout 1 15/06/2022 15:24 Page 8

news @proelectrician

For the latest electrical news visit www.professional-electrician.com

professionalelectrician

pe@hamerville.co.uk

Professional Electrician, Regal House, Regal Way, Watford, Herts, WD24 4YF

NAPIT releases free guide to elevate EV installations In response to the recent government funded audit into the installation of Domestic Electric Vehicle Chargepoints (EVCPs) under the Electric Vehicle Homecharge Scheme, NAPIT has created a ‘Top 10 Tips’ leaflet to provide valuable advice to installers of EVCPs. The audits revealed several areas that should be enhanced to enable greater safety and compliance and made a series of useful recommendations to support the installation of EVCPs. This new Top 10 Tips guide outlines some key areas of focus for installers of EVCPs, and NAPIT is encouraging all those who undertake EVCP installations to take some time to read it as part of their Continuing Professional Development (CPD).

Areas of focus within the guide include how to approach existing electrical installation checks, ensuring the correct earthing of chargepoints, adequacy of supply, how to alert the DNO and labelling and certification requirements.

Commenting on the new guide, Frank Bertie, Chief Technical Officer at NAPIT, said: “The Audits commissioned by the Office of

Zero Emission Vehicles into Domestic Chargepoints outlined several common oversights made by installers that were often quite simple to rectify.

“We hope this guide will enable greater compliance and safety standards as we remain committed to supporting our members and the wider industry in enhancing their understanding as new technological advancements are made.”

ACCESS AND DOWNLOAD THE FULL GUIDE AT: WWW.RDR.LINK/EAI003

Ansell Lighting and Bradford College join forces Ansell Lighting has teamed up with Bradford College to support the building of a house for electrical installation students to practice on.

The house, or Active Learning Area, has been built in the atrium of the leading West Yorkshire college and worked on by City & Guilds Level 1 and 2 students from a range of building services and construction courses, including electrical installation, plumbing, bricklaying and joinery.

Ansell has sponsored the project, which has been named the Ansell Lighting Academy, and provided Prism

Pro CCT Fire Rated Downlights for use in the kitchen and bathroom areas, as well as floodlighting, a mini floodbox and exterior wall lights.

Electrical students will be wiring the lighting and power while the plumbing students will be piping the services and radiators. The house has also been ‘futureproofed’ so it can be re-used each year for new students to get active practice.

Ansell’s products are also being used in a series of bays for student assessments and the college hopes to build a two-storey house in another part

Luceco has AMD2 CPD covered Not sure what RCDs are acceptable now? Are SPDs and AFDDs required in all installations? You can take the stress out of updating your Amendment 2 knowledge with the Luceco Academy.

This free training CPD course covers all the key changes to circuit protection in the updated Amendment 2 of the 18th Edition of BS 7671 including: - Types of RCD that are acceptable - The easier route to deciding if SPDs are required - Exactly where AFDDs should be installed All Luceco Academy CPD courses are fully accredited, and each provides one credit towards annual CPD requirements.

SIGN UP AND TAKE THE COURSE AT: WWW.RDR.LINK/EAI004 8 July/August 2022 PROFESSIONAL ELECTRICIAN

of the atrium to create one of the largest Active Learning Areas in the country.

PE Page Grid_Layout 1 30/04/2019 11:39 Page 1

007_PE_JUL-AUG22_Layout 1 15/06/2022 15:25 Page 10

news

For the latest electrical news visit www.professional-electrician.com

‘The electricians’ best friend’ launches in the UK Fergus, the software designed to save electricians hours of time on admin, has launched its platform in the UK. Headquartered in Auckland, New Zealand, Fergus (whose UK customers include Little Miss Electrical, pictured right) was founded in 2014 by tradesman Dan Pollard, when he set out to solve the admin problems that had plagued his business for years.

Since that time, the company has transformed the way trade businesses in New Zealand and Australia operate and has become recognised as a global leader in software for tradespeople.

Currently serving over 18,000 tradespeople in eight countries, Fergus’s mission is to provide electrical contracting businesses with access to software tools to organise their business without burying them in admin. The Fergus App also ensures healthy finances and that you get

paid quickly; all aspects of a job that need to be done to get paid are in the workflow and, as the only system tracking labour and materials back to the job in real time, Fergus ensures each job is profitable.

James Chillman, UK Country Manager, says: “The trades have been left behind and ignored by the software industry, mainly because the average size of trades businesses was considered too small to matter. Fergus is designed specifically for the trade and has all the user friendliness built in for those company owners looking to spend less time on admin and more time doing the things they enjoy.”

GET MORE DETAILS ABOUT FERGUS SOFTWARE BY VISITING: WWW.RDR.LINK/EAI005

007_PE_JUL-AUG22_Layout 1 15/06/2022 15:25 Page 11

@proelectrician

professionalelectrician

pe@hamerville.co.uk

Professional Electrician, Regal House, Regal Way, Watford, Herts, WD24 4YF

Niglon changes lives with £50,000 charity donation A £50,000 donation is set to support the wide-ranging work of the electrical industry’s charity.

Niglon became the first ever corporate partner of the Electrical Industries Charity last June – and now, 12 months on, has handed over what is hoped will be the first of many donations.

Commercial Director, Paul Dawson, says working alongside the charity has opened his eyes to the breadth of services offered to current and former electrical workers – and their families.

As part of the partnership, Niglon has donated 10% of the profits plus VAT from every single sale of its Median wiring accessories range during the last year.

The company has also worked to highlight and spread awareness of the great work of the charity among the industry through traditional media, company marketing materials, and on social media.

Paul says: “When I found out the EIC was launching the commercial partnership scheme, there was no doubt in my mind that this was the answer – an ongoing link which would enable us to make a real difference, and to demonstrate our commitment to the electrical industry and the wellbeing of those within it.

“We really can’t thank the EIC enough for their continued hard work when it comes to making sure no one from the industry is alone, and we hope this donation goes some way towards showing our appreciation.”

EIC CEO, Tessa Ogle, said: “Through

being a representative of the charity, donations like this make a massive difference to people in our industry who need help when they’re experiencing challenging times. This will benefit in so many ways, from mental health aid to financial and legal support.”

007_PE_JUL-AUG22_Layout 1 15/06/2022 15:26 Page 12

news @proelectrician

For the latest electrical news visit www.professional-electrician.com

professionalelectrician

pe@hamerville.co.uk

Professional Electrician, Regal House, Regal Way, Watford, Herts, WD24 4YF

Lighthouse Club partners with Ford to “Make It Visible” The Lighthouse Construction Industry Charity has teamed up with Ford to “Make it Visible” – a new high-visibility campaign using higher-viz safety vests to grab attention and point people in the direction of help when needed.

The leading UK commercial vehicle brand is stepping in to help combat the issue with as many as two construction workers lost to suicide every day, according to the Office for National Statistics.

Despite extensive physical safety measures taken to protect on-site workers, construction workers in the UK and Ireland are taking their own lives, unaware of the help and support available.

Actively promoting wellbeing Working with the Lighthouse Club and Balfour Beatty, Ford is actively promoting wellbeing awareness amongst its customers. With Ford accounting for almost one in three new commercial vehicles sold throughout 2021, putting mental safety on an equal footing with physical safety on construction sites, is an important step for this customer group. By helping to make the support more visible, more workers will be able to seek assistance from available resources.

“This campaign is hugely important to Ford and highlights the importance of mental wellbeing alongside physical wellbeing on the construction site”, said Mandy Dean, Director of Commercial Vehicles at Ford of Britain. “As the UK’s

best-selling commercial vehicle brand, it is likely the majority of construction workers are Ford customers and operators, so we have a duty to support them.”

The Make it Visible campaign follows on from Ford’s Time to Change launch “Elephant in the Transit” from 2018, building awareness of male suicide and promoting the front seat of a vehicle as a safe space to talk This latest initiative sets out to provide counsellors a means to get to construction sites, with on-site posters matching the vest’s colours. These posters will direct workers to a safe place to talk off-site, so more can seek help easily.

Bill Hill, CEO of the Lighthouse Construction Industry Charity, said: “We are absolutely delighted to be partnering with Ford to deliver the ‘Make it Visible’ campaign. These highly distinguishable vans, will be visiting sites across the

country to deliver visible support to the boots on the ground workforce.

“The vehicles are manned by the Lighthouse Club’s On Site Team who are all Mental Health First Aiders with relatable experiences in the construction industry and I’m convinced that this initiative will have a positive impact on workforce wellbeing and ultimately save lives.”

The Make it Visible campaign launched at this year’s Commercial Vehicle Show in Birmingham, supported by a fully liveried Transit Custom in matching high-visibility tones. These highly distinguishable vans will ultimately provide real support on the ground, transporting Mental Health First Aiders to the sites and workers around the country, with the aim of making it the go-to beacon on the street.

GET MORE DETAILS ABOUT THE MAKE IT VISIBLE CAMPAIGN AT: WWW.RDR.LINK/EAI006 WATCH THE CAMPAIGN INFORMATION VIDEO AT: WWW.RDR.LINK/EAI007

12 July/August 2022 PROFESSIONAL ELECTRICIAN

PE Page Grid_Layout 1 13/06/2022 11:48 Page 1

PE Page Grid_Layout 1 07/06/2022 09:07 Page 1

015_PE_JUL-AUG22_Layout 1 15/06/2022 15:31 Page 15

COMMENT

BUILDING SAFETY ACT-ION! David Cowburn, Chief Operating Officer at NAPIT Group and member of the Interim Industry Competence Committee, reflects on the journey of the Building Safety Bill and sets out how it will impact the construction industry.

i

ntroduced in the House of Commons on 5th July 2021, the Building Safety Bill received Royal Assent on 28th April 2022. The 262-page Act provides the vehicle for government to introduce secondary legislation to change how residential buildings are constructed, maintained and made safe following the recommendations from Dame Judith Hackitt’s Independent Review of Building Regulations and Fire Safety, published in 2018.

Five years in the making The Building Safety Act has been five years in the making, and many of the Act’s powers will not be realised for another 18 to 24 months due to the need for secondary legislation.

Whilst some progress has already been made towards the formation of the Building Safety Regulator (BSR) within the Health and Safety Executive, which will be responsible for enforcing a more stringent regulatory regime for buildings in scope, as well as overseeing the safety and performance of all buildings, the Building Safety Act sets out the powers for this to be officially established.

The Act also provides the powers for the formalisation of three new groups, currently operating in an interim capacity.

Over the next 12-18 months, the Residents Engagement Panel, Building Advisory Committee and Industry Competence Committee will be formed to serve as advisory groups to the BSR. Higher-risk buildings (HRB), or in-scope buildings, are defined as those that contain at least two residential units and are either 18 metres in height or 7+ storeys, whichever is met first. Care homes and hospitals that meet the same height threshold are also included in the definition during design and construction.

The Golden Gateway to success?

The introduction of 'Gateways' and the 'Golden Thread' will be the most significant changes that the industry will have to manage during the design and construction phase of an HRB. The Gateway system introduces ‘stop’ points at three stages of design and construction to allow for detailed checks to be made on compliance with building regulations and fire safety standards.

Detailed requirements about the Golden

“The introduction of ‘Gateways’ and the ‘Golden Thread’ will be the most significant changes that the industry will have to manage..”

Thread will be introduced via secondary legislation, but its purpose will be to require those responsible for an HRB to keep detailed, clear and accessible information about the design, construction and safety of critical features of the building.

The removal of the requirement for all occupied HRBs to have a Building Safety Manager was perhaps the most contentious amendment to the Building Safety Bill during its passage through Parliament. This was proposed to ensure that responsibility for the safety of the in-scope building was managed but was removed due to concern over the cost of this role on leaseholders.

Whilst this requirement was removed, the Building Safety Act requires each HRB

PROFESSIONAL ELECTRICIAN July/August 2022 15

015_PE_JUL-AUG22_Layout 1 15/06/2022 15:36 Page 16

COMMENT

to have a named Principle Accountable Person with overall responsibility for meeting specific statutory obligations for the whole building.

The Principle Accountable Person will be responsible for creating a Safety Case Report which will be required to be submitted to the BSR for assessment. The use of competent people to undertake work on or in HRBs is critical to the building safety reforms, and the government is working with the industry to determine these requirements.

HRBs will face a number of new mandatory reporting and registration requirements over time. These will include requiring all occupied HRBs to be registered with the BSR, mandatory occurrence reporting of certain fire and structural safety issues to the BSR, and the registration of all building inspectors and building control approvers.

In addition to the aforementioned design and construction requirements, the Building Safety Act makes provision for the establishment of the National Regulator of Construction Products, powers for the creation of a New Homes Ombudsman Scheme and various measures to protect leaseholders from costs relating to cladding remediation.

Interestingly, it also gives the government authority to refuse planning permission to companies that do not cooperate with the government on funding building safety remediation.

So, whilst the number of changes outlined in this article may appear daunting to the design and construction sector, they shouldn’t come as a surprise, and action isn’t expected to be taken immediately. With all secondary legislation still subject to consultation, there is still some uncertainty about many of the requirements and there remains an opportunity to influence how they are implemented.

We eagerly await these consultations and fully expect the focus on enhancing building safety and the competence of those undertaking work on and in buildings to remain at the heart of the reforms.

PRIZE DRAW

WIN A FORT SMART SECURITY KIT! To celebrate the continued success of its Fort Smart Security range, ESP is giving you the chance to win a Fort Smart Alarm Kit.

F

W IN

ort, the latest range from security solutions supplier, ESP, is a comprehensive range of smart security products which includes intruder alarms, video doorbell, video security light, sensors and a selection of 1080p cameras.

They all operate under the ‘Click Smart+’ App, which is subscription-free, with no additional fees incurred. By bringing the operation of the Fort range under the well-established, tried and tested Click Smart+ App, users have control of a raft of connected home and security products all from one secure, easy to access platform.

The Fort Smart Security range has been designed to bring simple, smart solutions together for a safer and more comfortable home. The range features contemporary styling and is simple to install, maintain and use, providing a hassle-free security solution.

At the heart of the Fort smart security range is the smart intruder alarm, which will support up to 32 RF devices and provide remote monitoring and alert notifications directly to the Click Smart+ App. The smart alarm is available in handy kits or can be purchased as separate devices for a tailor-made system.

There are six different kits in the range, with the basic kit containing one each of the following – a smart hub, PIR, door/window contact and remote control.

HOW TO ENTER ENTER THE FREE PRIZE DRAW TO WIN A FORT SMART ALARM KIT FROM ESP BY FILLING OUT THE CONTACT FORM AT: WWW.RDR.LINK/EAI008 Deadline for entries: 31/08/2022. Usual T&Cs apply.

16 July/August 2022 PROFESSIONAL ELECTRICIAN

PE Page Grid_Layout 1 26/03/2022 08:52 Page 1

018_PE_JUL-AUG22_Layout 1 15/06/2022 15:37 Page 18

COVER STORY

A QUALITY SOLUTION FOR THE COST-CONSCIOUS CUSTOMER

With the growing trend for investing in existing property – be that kitchen/diner extensions in the home or interior updates in hotels or holiday lets, renewing wiring accessories can be a quick win for those looking for a quality finish on a budget. We discover why the Hartland G2 range by Hamilton Litestat is every electrical installer’s answer to such scenarios.

a

updates as the plate can simply be popped off to paint or paper and pushed back on once decoration is complete.

well-known British brand for quality switch plate and socket solutions in an array of designs and finishes, Hamilton has value engineered one of its most popular box-fit designs to create a screwless and versatile faceplate that satisfies interior style aspirations, while staying true to a more prudent budget.

A practical solution for the home, hotel or office Produced from a pressed metal rather than cast, the Hartland G2’s push-to-fit-plate not only makes life easier for electrical contractors and offers an

overall cost saving when compared to their cast plate counterparts, but it does so without compromising on quality or finish. Additionally, with the front plate easily removed, it is the ideal solution for high traffic areas requiring regular décor

18 July/August 2022 PROFESSIONAL ELECTRICIAN

018_PE_JUL-AUG22_Layout 1 15/06/2022 15:38 Page 19

On-trend and Paintable Slim and elegant with soft round edges, Hartland G2 offers a choice of 11 finishes – including NEW of-the-moment Anthra Gray and is available as a Paintable option too – so customers can colour match to their taste and make every flick of a switch feel totally unique.

Sockets and switches for every scenario A comprehensive range of rocker switches, grid switches, LED dimmer switches and power sockets with 20AX switches – complete with printed word or symbol appliance identification on the switch, means that not only is there a switch for every requirement but it’s easy to identify too.

Full charge for a digital-centric generation Meeting the demand for technology at our fingertips, the Hartland G2 also includes a double switched socket complete with two 2.4A USB-A outlets as standard, but the NEW combined double switched 2.4A USB-A & 2.4A USB-C plate is rapidly becoming the ‘must-have’ install for charging phones, tablets, smart watches and other electronic devices.

Complete control in one convenient location For customers dreaming of a clean interior finish, the Hartland G2’s 6, 8 or 9 gang grid plates, available in eleven finishes including matt black, offer the perfect solution. The push-to-fit plates allow 20A double pole appliance switches, along with light switches and other controls to be operated from one plate and easily changed without fuss or damage to surrounding decor if switch functions need to be altered after fitting.

NEW Paintables option switches personalisation up a notch While off-the-shelf options work for many, the desire for personalisation grows – whether within the home, the hotel or even the workplace setting. Hamilton’s Paintable colour-matching service allows customers to achieve just this. Using a durable, powder coating process, accessories can be painted in any colour to compliment an interior scheme. Simply select your RAL colour, place your order with your wholesaler and leave the rest to Hamilton.

A case in point: Hamilton Hartland G2 compliments Victorian grandeur in Hove Kings House in Hove is a stunning Grade II listed building – meticulously refurbished into 69 luxurious apartments all with uninterrupted sea views.

Hamilton’s Hartland G2 range was selected by Portsmouth-based electrical contractor MR Electrical to use throughout the development. Chosen for its quality – to compliment the opulent Victorian architectural features – as well as for its simplicity of installation at a competitive price, it was the natural choice.

2-gang double pole switched sockets were used throughout in an Antique Brass finish with black inserts, complementing the property’s brass fixtures and fittings. In the higher specification apartments, dual switched sockets were upgraded to incorporate 2.4A USB-A Ultra charging outlets, while lighting is controlled throughout with a mixture of 1-, 2-, 3- and 4-gang rocker switch plates. In the kitchens, installed within antique-styled mirrored splash backs are two double-switched sockets and a 2-gang 2-way grid plate that controls the integrated strip LED lighting.

In the residents’ lounge – a striking focal point of the development – private lounges and bedrooms, EuroFix media plates include a TV+FM/DAB+SAT1+SAT2 quadplexer and a RJ45CAT6 outlet for internet access.

READ THE FULL CASE STUDY AT: HAMILTON-LITESTAT.COM

BROWSE THE FULL HARTLAND G2 RANGE AT: WWW.RDR.LINK/EAI009

PROFESSIONAL ELECTRICIAN July/August 2022 19

020_PE_JUL-AUG22_Layout 1 15/06/2022 15:48 Page 20

THE ROAD TO NET ZERO

By Tom Gillam, Electrician Programme Manager at Schneider Electric

Extreme weather: when it takes smart, net zero homes to address climate change

I

n this post-pandemic world, ‘home’ is where our lives are. It’s the place where we work, connect with family and friends, where we entertain and unwind. We instinctively trust our homes to be safe – and we invest significant time and energy into making them secure. But are we protecting our dwellings from all of the right threats? And what is the role that smart, net zero homes can play in assuring our security and our future?

It’s commonplace to think of some of the better-known risks such as fire and burglary first. Yet our homes – if they aren’t designed to be future-proof, smart and net zero – are also vulnerable to other, newer and largely unforeseen threats: climate change and natural disasters. On the horizon, population growth and accelerated economic development are combining to create a perfect storm for the people who live at the forefront of ecological change.

Energy efficiency starts at home It is a self-perpetuating cycle. The more emissions we produce, the more unpredictable weather patterns are likely to become. That’s why decarbonisation and emissions reduction have always been a core strategy in the fight against climate change. Immense progress has been made over the years, with many industries adopting environmentally sustainable practices.

Yet homes have long been a blind spot. Households are growing into one of the largest producers of CO2 emissions.

It’s important therefore that we rethink how we build and run our homes – not only to protect them from direct damage, but to ensure they deliver sustainability at their core. Embedding clean and smart methodologies into

building construction and operations helps to protect the planet and the things that we love. In the domestic sphere, the fastest way to achieve this is through IoT-connected smart, net zero home technologies.

Embracing smart technology Smart sensors and devices, placed at key points of a home energy system, give homeowners access to a new world of data and insights. When connected to a central dashboard, they can report back crucial information – everything from consumption data to carbon emissions produced by a specific room on a certain day. With enough granularity, a homeowner can see what rooms or specific appliances are consuming the most energy.

With fresh insight gained from smart devices, people can finally take control of their energy consumption. They can see where the problems lie and moderate their behaviour to eliminate unnecessary wastage. This not only reduces emissions, it cuts energy costs in the home as well. Over time, smart and net zero home technology isn’t just good for the planet, it’s good for people’s energy bills.

Many of the threats facing our homes today are abstract or invisible. The damages caused by a fire, a climate change-linked flood or storm are difficult to appreciate until they have actually struck. Yet the consequences can be severe. Smart, net zero home technology is an invaluable ally here in every respect. Digital makes the invisible visible, allowing us to live safer and more responsible lives, while efficient energy use helps us put a lid on emissions.

By being smarter and more data-driven in our approach, we can truly become the master of the house.

LEARN MORE ABOUT SCHNEIDER'S DRIVE TO NET ZERO AT: WWW.RDR.LINK/EAI010

PE Page Grid_Layout 1 07/06/2022 09:18 Page 1

022_PE_JUL-AUG22_Layout 1 15/06/2022 15:51 Page 22

THE

CODEBREAKERS MARTIN S: THIS MAIN GAS BOND WAS FOUND DURING A PERIODIC INSPECTION OF A COUNCIL-OWNED SHOP UNIT IN LEICESTER. I THINK YOU'LL AGREE IT BEGGARS BELIEF! We often stress that where any protective bonding, either main or supplementary, is in place, it needs to be adequately attached, with good mechanical and conductive properties, in accordance with Regulation 134.1.4.

An appropriate warning notice in accordance with Regulation 514.13.1 should also be affixed near the connection point, which looks to be in place.

The problem is with the sheer stupidity and ignorance that the installer has shown by screwing directly into the gas main to attach the main protective bonding. They have actually caused a far more dangerous problem by attempting to ensure mechanical strength and conductance.

Whether the gas was isolated or not at the time of the work, the risk of gas leaking is likely to be high, the integrity and strength of the gas pipe wall is now compromised, and the hardware used to make the connection is likely not designed or certified to be used in this way.

A staggeringly stupid installation practice that has affected another non-electrical service that could easily cause a loss of life!

The Observations, Regulation infringements and Codes applicable to this observation would be: Main protective bonding conductor not terminated correctly, risk of a possible gas leak and explosion Note: I feel the severity of Coding can be escalated to C1 in this case, due to the presence of the general public

GET THE BOOK AND CRACK THOSE CODES!

134.1.1, 132.11, 134.1.4

C1 C2

Updated for BS 7671:2018+A2:2022, NAPIT’s EICR Codebreakers publication is purpose-written to aid contractors, inspectors and clients, and now includes updates to align with Amendment 2 of the IET 18th Edition Wiring Regulations. The book is the perfect technical aid for electrical professionals and their customers.

22 July/August 2022 PROFESSIONAL ELECTRICIAN

022_PE_JUL-AUG22_Layout 1 15/06/2022 15:52 Page 23

Need help with cracking those all-important EICR codes? Every month the technical team at NAPIT will be studying your latest ‘Caught on Camera’ photos and offering advice on the next steps, should you find a similar installation. If you want the team at NAPIT to help crack your codes then send your pictures through to us at: pe@hamerville.co.uk

SEAN DIXON: WE WORK FOR A LOCAL RECYCLING FIRM AND THEY HAVE GOT ANOTHER CONTRACTOR TO CARRY OUT SOME WORKS ON-SITE. THIS IS THE QUALITY OF WORK – NEWLY INSTALLED ‘PICK & MIX’ WITH MCB DB AND THEIR VERSION OF AN IP65 RATED ENCLOSURE. It’s always frustrating when you see new work which obviously isn’t compliant, but the inspection and associated EICR can only note what is there.

First off, the enclosure in Photo 2 has been significantly modified and is unlikely to offer the IP rating envisioned by the manufacturer. If the enclosure is in place to stop a particular external influence and does so with the extensive modifications to it, there isn’t a problem.

If, however, the IP rating is required for fluids and/or solids entering from above, it’s likely the DB no longer has adequate protection from those types of external influences.

Secondly, the mixed manufacturers’ equipment types that are in use in the DB, Photo 3, are an issue. There are five different manufacturers’ MCBs in use; their opening and closing states are in the same direction, there are no signs of thermal damage, and the DB enclosure hasn’t been modified to house them. I can’t comment on their connection to the busbar, as that information isn’t available. That may or may not be a problem, depending on the individual

manufacturers’ busbar offsets.

Something the client may need to be aware of, which wouldn’t necessarily be covered in the EICR, is that the original installer is now the manufacturer and is responsible for type testing unless the DB manufacturer has given their permission for this configuration.

Should a fire or other damage be caused by the DB in the future, the original installer, who is now the manufacturer, will be liable if it is proven that the configuration of the different equipment types wasn’t suitable and/or caused the aforementioned damage.

The Observations, Regulation infringements and Codes applicable to this observation would be: IP rated enclosure may no longer offer effective protection

132.5.1, 134.1.1, 522.3, 522.4

FI C2

MCB busbar connection offsets may or may not be acceptable, given different manufacturers’ designs

134.1.1, 536.4.203

FI C2

DB contains five different manufacturers’ equipment, with no signs of thermal damage Note: If no permission from the original DB manufacturer to use different equipment manufacturers exist, the original installer is now classed as the manufacturer for any type testing or related liability claims

134.1.1, 134.1.4 536.4.203

The A2:2022 18th Edition Codebreakers publication is priced at £22.00 (members) and £24.00 (non-members). It is available in both hard copy and digital versions * Price is VAT exempt and excludes postage and packaging.

ORDER YOUR COPY OF NAPIT CODEBREAKERS BY VISITING: WWW.RDR.LINK/EAI011

C3

PE Page Grid_Layout 1 07/06/2022 09:20 Page 1

025_PE_JUL-AUG22_Layout 1 15/06/2022 15:54 Page 25

TECHNICAL & TRAINING

CONDUIT SIZING

The experts at NICEIC look at several methods that may be used to determine an appropriate diameter of conduit for the installation of conductors, taking account of the number of conductors to be installed and the most onerous section of the conduit system into which they will be drawn.

b

efore we start, it should be noted that cable grouping factors are not considered in this article.

Regulation 522.8.1 requires that wiring systems shall be selected and erected to avoid damage to the cables and their terminations during installation, use or maintenance. BS 7671 does not provide guidance on how compliance with this regulation may be achieved.

When considering a conduit system, there are generally two accepted methods for determining the diameter of the conduit to be used:

both conduit and conductors to ensure that, for the particular conduit installation, the conduit factor is larger than or equal to the sum of the factors for the cables to be installed, with the intention that single-core cables can be pulled in without the use of undue force.

For short, straight runs of conduit, the friction between cable and conduit is less than for longer runs or for runs containing bends. As a result, separate tables are used for conduits arranged in: l

straight runs not exceeding 3 m in length, or

l

straight runs exceeding 3 m in length, or runs of any length incorporating bends or sets.

In the examples shown in this article, use is made of data given in the tables listed in Appendix A of IET Guidance Note 1 (GN1). Reference to this publication may aid the reader when working through the given examples.

Example 1 Four 4 mm² single-core PVC conductors are to be drawn into a 3 m length of conduit with no bends. Using the per unit

Fig 1. Conduit system arrangement for Example 2 l l

The unit system method, and The space factor method.

There is a tendency amongst some electrical contractors to select the conduit size based on previous experience.

However, this often results in the selection of conduits of insufficient diameter such that it becomes difficult to draw the cables in, increasing the likelihood of damage to the cables.

Method 1: The use of conduit and cable factors (unit system method) This well-established method for sizing conduit is based on practical tests that take into account both the distance between drawing-in points and the number of bends in a particular run, both of which hinder the ability to draw the cables into the conduit.

This method involves the designer using standard tables to obtain factors for

PROFESSIONAL ELECTRICIAN July/August 2022 25

025_PE_JUL-AUG22_Layout 1 15/06/2022 15:56 Page 26

TECHNICAL & TRAINING

Fig 2. Usable space within a conduit (bearing in mind the non-uniform arrangement of installed cables)

method, determine the minimum size conduit that should be used.

Answer 1 From Table A1 of GN1: For 4 mm² conductors the factor is 58.

So, for 4 x 4 mm² conductors the total cable factor is 4 x 58 = 232 From Table A2 of GN1: For a straight 3 m length the smallest conduit with a factor equal or larger than 232 is 16 mm, which has a conduit factor of 290.

Example 2 Four 4 mm² single core PVC conductors are to be drawn into the conduit system shown in Fig 1.

Using the per unit method, determine the size of conduit that should be used.

Note: A double set can be treated as being equivalent to a single right angle bend (see A1 of GN1).

system, the smallest size conduit that should be used in either section is 25 mm.

It should be recognised that the position of the drawing-in points may impact the size of conduit used. Altering the location of the drawing-in point or adding an extra drawing-in point may provide the designer with the option of reducing the size of conduit used.

Comparing the answers given in examples 1 and 2 illustrates that, for a short straight run, a conduit with a smaller diameter may be used due to the friction between conduit and cable being less than that for the longer, more complex shape.

Method 2: The use of a space factor A space factor may be used as an alternative method for determining the minimum size of conduit for those types not covered by the tables in Appendix A of GN1 and Appendix E of the OSG. The current edition of GN1 recommends that the area occupied by the cables should not be more than 35% of the internal area of the conduit (see Fig 2).

In order to use this method, the following information, typically provided by the manufacturer is required: l

Answer 2 From Table A3 of GN1: For 4 mm² conductors the factor is 43.

So, for 4 x 4 mm² conductors the total cable factor is 4 x 43 = 172 From Table A4 of GN1: For Section 1, having one bend and one double set (effectively a conduit run having two right angle bends) in 7 m, the smallest conduit with a factor equal or larger than 172 is 25mm, having a conduit factor of 311.

For Section 2, having three bends in 5 m, the smallest conduit with a factor equal or larger than 172 is 25 mm, having a conduit factor of 260.

Consequently, for the proposed

l

The overall diameter of the cable, including its insulation, and The internal diameter of commonly available sizes of conduit.

Where a conduit contains cables of the same size, the minimum internal diameter of the conduit is given by:

Where: n = number of cables in conduit d = diameter of the cables in the conduit (including insulation) 0.35 = conduit space factor

26 July/August 2022 PROFESSIONAL ELECTRICIAN

However, where the conduit contains cables of different sizes, the minimum internal diameter of the conduit is given by:

Where d1 and n1 are the diameter and number of the first set of cables and d2 and n2 are the diameter and number of the second set of cables.

Example 3 Determine the minimum size steel conduit that will accommodate four 4.0 mm2 single-core cables with an overall diameter of 4.8 mm and two 2.5 mm2 single-core cables with an overall diameter of 4.2 mm. It can be assumed that the heavy duty conduit used has a nominal wall thickness of 1.6 mm.

Answer 3 Using the formula to determine the minimum internal diameter of the conduit:

Taking the nominal wall thickness of the conduit as 1.6 mm would give a minimum internal diameter of 19.1 + (1.6 x 2) = 22.3 mm.

Therefore, the minimum standard size of conduit that complies with the 35 % space factor is 25 mm.

Summary When conduit is used it is necessary to determine the maximum number of cables that can be drawn in to ensure there is sufficient free space remaining to prevent overheating.

There are two methods of achieving this; one uses the unit system method, which relies on using cable factor tables, the second involves verifying that the area occupied by the cables does not exceed 35 % of the internal area of the conduit.

GET MORE DETAILS ABOUT NICEIC REGISTRATION AT: WWW.RDR.LINK/EAI012

PE Page Grid_Layout 1 07/06/2022 09:22 Page 1

PE Page Grid_Layout 1 28/03/2022 09:07 Page 1

029_PE_JUL-AUG22_Layout 1 15/06/2022 16:01 Page 29

TECHNICAL & TRAINING

ENERGY EFFICIENCY & ELECTRICAL INSTALLATIONS

Jake Green, Scolmore’s Technical Engagement Manager, provides some insight into the integration of electricity generation, energy efficiency management systems and energy storage into a prosuming whole.

T

he ever-rising cost of energy has become a significant factor in the drive to improve energy efficiency. Whilst data gathered by the government in England and Wales highlights that since 2005 there has been a downward trend in the usage of gas and electricity in all properties irrespective of their age, present price trends are on a rapid upward curve.

The current prosuming technologies (PV, generators etc.) provide an opportunity to integrate electricity generation, energy efficiency management systems and energy storage into a prosuming whole, enabling a more varied means of supplying and using electricity. It may transpire that a new Chapter 81 will be introduced into Amendment 3 of BS 7671 whenever that happens in the future.

The introduction of Chapter 82 into Amendment 2 of BS 7671 has provided additional guidance for the integration of energy efficiency/energy management into the operation of electrical installations.

This article briefly considers some of the guidance provided by the informative Appendix 17 (Energy Efficiency) detailed in BS 7671 and the Harmonised Document published by BSI, Low-voltage electrical installations Part 8-1: Functional aspects – Energy efficiency (IEC 60364-8-1: 2019) and discusses some of the factors that should be considered when looking at energy efficiency and energy management.

Legislation In all parts of the UK there are specific requirements detailed in the associated building regulations for energy efficiency. In England reference should be made to Part L and the associated guidance found in Approved Documents L1 and L2; in Scotland reference should be made to the Building Regulations Technical Handbooks (domestic and non-domestic).

Reference should always be made to the legislation and guidance issued by the various parts of the government in the UK.

Appendix 17 The purpose of Appendix 17 is to ‘… provide additional recommendations for the design and erection of electrical installations, including installations having local production and storage of energy, for optimising the overall efficient use of electricity.’

Whether human behaviour has a greater impact on energy usage than any energy management system, controls will play a significant role in any design considerations (clause 17.2).

It is the case that little thought is given for ‘…optimising the overall efficient use of electricity’ when an electrical installation is being designed. For example, cable sizes are determined based on the design current of the circuits, the rating of the protective device(s), and various rating factors.

The selected cable is designed to limit the rise in temperature during current-carrying conditions to a safe level within the limitations of the cable.

Currently there is no regulatory imperative for the designer to take

PROFESSIONAL ELECTRICIAN July/August 2022 29

029_PE_JUL-AUG22_Layout 1 15/06/2022 16:02 Page 30

TECHNICAL & TRAINING

account of any energy efficiency factors.

A proposed Chapter 81 based on the current Harmonised Document (HD) would require the designer to factor the efficient use of electrical energy into any calculation.

Clause 17.11 (Appendix 17) suggests that the design of an electrical installation should consider energy efficiency at every stage, including the impact of different load demands, usage etc. One implication of this is that distribution boards will need to enable the segregation of circuits supplying each zone or mesh as defined.

It will be necessary for the user to be able to monitor the electrical installation (clause 17.12) and, therefore, the measurement of total consumption in kWh for every hour of each day should be logged and stored for a minimum of one year and be accessible to the user.

However, a simplistic approach to energy efficiency might fail to consider, for example, embodied energy – that is the ‘unconsidered’ energy demands in the production of more/larger boards/cables and the like. The designer should not, therefore, simply increase cable sizes to limit voltage drop, or create meshes and zones thinking that these alone will necessarily reduce energy usage.

Design considerations When considering the availability of electrical energy, the designer and user will have to consider, as a minimum, the following (clause 17.2): l l

Selection of energy efficient appliances Assignment of load priority for use as an input of the load optimisation process – including any load shedding

l

l

The intended use of the installation in providing an energy efficient design, and The provision of a manual override facility enabling the user to take control from any automatic functions.

The design requirements detailed in clause 17.3 are: l l

l

l l l

Load energy profile Availability of local generation, such as PV, wind, generator and the like Reduction of energy losses in the electrical installation The tariff structure Arrangement of circuits The nature of the customer demand.

For the design of any energy management system the user specification is critical and to that end, prior consultations must be made to ensure that the energy efficiency management system (EEMS) is correctly set up.

Furthermore, the user must have the final decision over whether or not to operate a service at optimal or nominal values, or not to operate for a period of time should the need arise; for example, where someone is ill and a room requires additional heating or when a company receives an urgent order that must be completed (clause 17.2 Note).

Data gathering What is clear is the need for good data gathering. Such data will include the presence of people, temperature, air quality, daylight, operating time and cost of energy (clause 8.3.1.1 BS EN 60364-8-1).

The means of gathering data will vary

30 July/August 2022 PROFESSIONAL ELECTRICIAN

according to the need. Table 1 in BS EN 60364-8-1: 2019 provides guidance on measurement applications.

Without this data, the effectiveness of the EEMS will be limited. Clause 17.8 of Appendix 17 states, ‘Measurement is a key parameter to determine the efficiency of the installation giving the user an awareness of energy consumption.’

The EEMS should be designed in such a way that there is no reduction in the available supply or in the safe operation of any part of the installation.

Conclusion This article has only been able to touch upon a few important elements and will likely have raised more questions than answers. Such questions might include: l

l

l

l

What is the likely direction of travel for monitoring all electrical energy usage within an electrical installation?

What support is available to train designers of electrical installations in energy management systems?

What are the likely payback times for the additional measurement systems?

What consideration has been given to embodied energy?

It is clear that there is enormous scope for energy monitoring systems, data logging systems and training support for electrical designers as they begin to consider energy efficiency as part of the norm when designing electrical installations.

BROWSE THE ELUCIAN PRODUCT CATALOGUE AT: WWW.RDR.LINK/EAI013

PE Page Grid_Layout 1 10/06/2022 09:24 Page 1

032_PE_JUL-AUG22_Layout 1 15/06/2022 16:03 Page 32

TECHNICAL & TRAINING

TO SURGE OR NOT TO SURGE? Richard Townsend, Technical Development Engineer at NAPIT, considers the changes in surge protection requirements with the introduction of BS 7671:2018+A2:2022.

Previously in BS 7671:2018+A1:2020 When surge protective devices (SPDs) took centre stage in BS 7671:2018, they became arguably one of the most significant changes in BS 7671 for some time.

Although surge protection had been around for many years, it was only given a cursory glance in previous BS 7671 editions. That risk assessment and greyscale map of the UK really did put the cat amongst the pigeons.

Even now, four years on, there remains confusion regarding what SPD type, where, and how to comply. There was constant feedback to the National Committee, JPEL 64, that it should simply be mandatory unless there is a particular client who doesn’t want it.

We listened The National Committee listened to the feedback, deliberated the pros and cons, and have come up with the next step in surge protection for BS 7671. It wasn’t an

easy process, and the DPC and subsequent alterations to the proposed changes were difficult to keep up with.

Regulation 443.4.1 was modified heavily; the complex risk assessment, the Calculated Risk Level (CRL) factor, and the greyscale map of the UK are no longer included, therefore removing all of the stuff that was difficult to understand.

It is now actually much simpler, with BS 7671:2018 +A2:2022 requiring that protection against transient overvoltages shall be provided where the consequence caused by overvoltage could: (i) Result in serious injury to, or loss of, human life, or (ii) Result in failure of a safety service, as defined in Part 2 or (iii) Result in significant financial loss or data loss.

For all other cases, SPDs shall be fitted to protect against transient overvoltages

32 July/August 2022 PROFESSIONAL ELECTRICIAN

unless the installation owner declines such protection and wishes to accept the risk of damage to both wiring and equipment as being tolerable.

There’s more, though; there’s always more!

As we can see, it has now become much easier to understand. There is, however, one more piece to the puzzle. The changes say that where the owner wishes to accept the risk of damage to both wiring and equipment as being tolerable, they can state they don’t want SPDs fitted. This is fine and is absolutely their prerogative.

This client refusal caveat is not new; it was in the original BS 7671:2018. However, the main difference is that this caveat is now available to all domestic, industrial and commercial installations. Therefore, if a business or homeowner doesn’t wish to have SPDs fitted, they don’t have to.

If a client states they don’t want SPDs fitted, our advice is to obtain this in writing as proof that they refuse to have them.

032_PE_JUL-AUG22_Layout 1 15/06/2022 16:03 Page 33

Any documented refusal to fit SPDs should be accompanied by a detailed explanation of the benefits of SPDs and the consequences of not fitting them. It is essential that the benefits are clearly explained to the client and documented.

A failure to obtain this documentation can result in a range of problems in the future, particularly if equipment is damaged, and the client claims they were unaware of the importance of the SPD. That’s still not it!

Those of you with keen eyes will notice the particular wording of the second indent in the change to Regulation 443.4.1: ‘Result in failure of a safety service, as defined in Part 2’ As defined in Part 2 of BS 7671, the definition of a safety service roughly states that, a safety service is any system or equipment provided to warn people in the event of a hazard, or equipment essential to their evacuation. So that kind of changes things, as the caveat cannot be used to refuse the fitting of an SPD if any part of the installation is a designated safety service, which is fed from the

supply that the installation of a SPD would protect.

Examples of safety services are: l l l

Fire alarm systems Emergency lighting Mains supplied smoke alarms fitted within dwellings

It is almost a given that every industrial, commercial and domestic dwelling should, or will, have some form of smoke detection, fire alarms or emergency lighting. The caveat to not install SPDs is almost meaningless now because there are very few installations, if any, that meet the criteria for not having SPDs installed.

Is it better?

We think the new approach represents a significant step-change in the fitment of SPDs. Gone are the long-winded risk assessments and the numerous ways of misinterpreting the Regulations, which could lead to failure to comply.

What is in now is simple to understand. SPDs are a part of our installation culture and they should almost always be installed.

“If a client states they do not want SPDs fitted, our advice is to obtain this in writing from them as proof that they refuse to have them.”

It is much easier to operate this way as the confusion is gone. If you’re changing a CU/DB or making major modifications on a project, an SPD or SPDs should be fitted.

We still need to be careful though In any case, great care should always be taken, as different earthing arrangements require different types of SPD, and if they are mixed up, the consequences can be disastrous.

Likewise, SPDs used in PV systems, which are DC, must not be installed into AC systems, and vice versa.

Always seek manufacturers’ advice; if you are unsure of the type of SPD that should be used, they are more than willing to give you the advice you need.

To complement the launch of BS 7671:2018+A2:2022, all of NAPIT’s comprehensive suite of technical guidance publications have been updated to provide you with the latest advice.

They’re available in print or electronic formats from: www.napitdirect.co.uk

SPD refusal should only follow a documented explanation of the benefits and consequences

FOR MORE INFORMATION ON NAPIT SCHEME REGISTRATION, VISIT: WWW.RDR.LINK/EAI014

PROFESSIONAL ELECTRICIAN July/August 2022 33

PE Page Grid_Layout 1 07/06/2022 09:24 Page 1

035_PE_JUL-AUG22_Layout 1 15/06/2022 16:06 Page 35

TECHNICAL & TRAINING Following the announcement of new legal responsibilities for building dutyholders, ECA Technical Director, Mike Smith, focuses on behaviours as an aspect of competence.

WHEN DUTY CALLS

M

any in our sector will be familiar with the dutyholder responsibilities under the CDM Regulations 2015 (Construction Design and Management). These are set out clearly on the HSE website (www.hse.gov.uk) which provides a list of CDM dutyholders: clients, designers, principal designers, principal contractors, contractors and workers.

Extending the duties Even so, in 2022 we’re set to see a significant extension of duties under new building safety regulations, which will have wide applications across construction and maintenance.

Significantly, the upcoming changes will apply far beyond buildings covered by the Building (Higher-Risk Buildings) Regulations 2022, since they will be implemented through the competency requirements of the Building (Appointment of Persons, Industry Competence and Dutyholders) Regulations 2021. The dutyholder and competency requirements in the draft 2021 regulations apply to

virtually all notifiable building activity.

While the Building (Appointment of Persons, Industry Competence and Dutyholders) Regulations 2021 are still in draft form, they’re due to be introduced later this year, in line with the forthcoming Building Safety Act. Because of their wide application, all engineering services businesses need a solid understanding of the proposed competency duties along with the other regulations that will support the new Act. The new dutyholder responsibilities arise mainly from Dame Judith Hackitt’s post-Grenfell Tower fire review. They reflect the pressing need for a substantial change in attitudes to, and behaviours around, responsibility for delivering buildings that meet new regulatory requirements.

The updated responsibilities for building safety dutyholders naturally include, but go beyond, the assurance of skills and knowledge needed to carry out work.

Similarly, they complement, but are not the same as, the dutyholder roles under CDM 2015. For example, while a CDM Principal Contractor role may appear similar in some ways to a Building Safety

Principal Contractor role, the former is meant to deliver building project safety while the latter is meant to deliver a building that is safe to occupy. In other words, all the new building safety dutyholders will be legally required to adopt and promote new behaviours across the construction industry.

Demonstrating behaviours The draft Building (Appointment of Persons, Industry Competence and Dutyholders) Regulations 2021 state that, where one dutyholder appoints ‘any person’ to carry out any design or building work, they must ‘take all reasonable steps’ to ensure that person fulfils the competence requirements in the legislation.

The term ‘competence’ here has broad implications. A person carrying out building or design work must not only have the skills and experience to carry out the work, but also demonstrate a set of required ‘behaviours’.

New ‘behaviours’ required in the draft 2021 regulations include refusing to carry out any building work that isn’t compliant with relevant requirements, or to provide

PROFESSIONAL ELECTRICIAN July/August 2022 35

035_PE_JUL-AUG22_Layout 1 15/06/2022 16:07 Page 36

TECHNICAL & TRAINING

any design work that wouldn’t be in line with regulations.

As such, the updated regulations are designed to drive behavioural change just as much as requiring practical skills, knowledge and experience (SKE). And if the ‘person’ appointed is an organisation or business then that business must have the management policies, procedures, systems and resources in place to ensure that individuals under its control are themselves competent to carry out what is required to ensure building safety, and particularly fire safety.

One example of this is that a contractor must provide each worker under their control with ‘appropriate supervision, instructions and information so as to ensure that the building work is in compliance with all relevant requirements (of building regulation)’. Good communication and training across the whole project team will be key to achieving compliance with this aspect of the regulations.

WHAT DOES EACH TERM MEAN? There are now several terms being used in current and draft legislation which denote different areas of responsibility.

To summarise some different meanings: Dutyholders This term denotes several key roles in a project, such as client, principal designer, designers, principal contractor and contractors. In addition to CDM 2015 dutyholder roles there will be additional building safety dutyholder roles with the same titles (but complementary overall Additionally, all dutyholders under the new regulations will have to ‘take all reasonable steps to ensure the work carried out by them is planned, managed and monitored so as to be in compliance with all the relevant requirements. Each dutyholder will also have further specific duties aligned to creating a cooperative approach and

aims) as described.

Accountable Person The Building Safety Bill identifies new dutyholders as ‘Accountable Persons’ (APs) for residential high-rise buildings (HRBs). They are the person or organisation who owns or has responsibility for the building. They must take ‘all reasonable steps’ to prevent building safety risk such as fire or structural failure, and to reduce the seriousness of the incident if one occurs. requiring effective communication.

All this will be in addition to any dutyholder roles held by a business under CDM 2015, to ensure a safely delivered project or other building work.

GET MORE DETAILS ABOUT ECA MEMBERSHIP AT: WWW.RDR.LINK/EAI015

PE Page Grid_Layout 1 26/03/2022 09:24 Page 1

PE Page Grid_Layout 1 09/06/2022 07:49 Page 1

039_PE_JUL-AUG22_Layout 1 15/06/2022 16:10 Page 39

BUSINESS MATTERS In this regular column, Emerson Patton, founder of Bright Business Advice, creator of the ‘Bright 7-Sector Orbit’ business model and author of Bright Business Transformation for Contractors, shares his advice for building a better business.

WITHOUT STRONG LEADERSHIP YOUR BUSINESS ISN’T GOING ANYWHERE. Leadership is the cornerstone of any business. It’s the central structure of your business on which everything else sits and without it, the rest of the business crumbles.

When we talk about leadership, we use our five-level segmentation model: UNITE. Each letter represents a different stage of the leadership process, growing in sophistication as you grow as a leader.

Let’s take a closer look at each level so you can begin to see the journey you’ll take as a leader in your business:

the vision for this. Having a vision for your life goals will give you, the leader of the business, the passion and energy to develop strong leadership that will help to drive the business forwards.

I’d suggest starting with a ‘vision board’. I regularly create these with my clients to help them gain clarity on the direction for the individual and for the business.

1. Unify The unification of tasks and time is the most basic level of good leadership. Most business leaders have two separate tools: a diary and a task list. But what many don’t realise is that to work effectively, tasks should consistently be blocked out in your diary.

This simple yet highly effective time management strategy allows you to dedicate time to team meetings, finance reviews, marketing sessions, and other key tasks that often get put off.

3. Insight The I in UNITE stands for Insight – gaining the knowledge you need to grow as a leader and developing emotional intelligence to allow you to connect with your team so that you can inspire and motivate them.

Most leaders gain insight through experience. They adopt a ‘learn-as-you-go’ approach and are proud of the struggles and hard knocks they’ve taken.

But I believe there’s a much quicker, more effective way to get the knowledge you need to drastically improve your leadership style. And that’s through reading books, audio books, podcasts, online training, mentoring and coaching.

Having a mentor allows you to shortcut the process of gaining experience and gets you to a place of better leadership much more quickly.

2. Next The N in UNITE stands for Next – it’s about life goals and what you want to do next. What’s your vision for your life goals? Your business needs to support

4. Teamwork Have you ever seen the boat race between Oxford and Cambridge? The rowers are so in-sync with one another, all being led by the Cox. That’s what

we’re aiming for with your business.

True leaders know how to work as part of a team, to hold their team accountable, and pull them together to reach goals.

As a leader, you need to create an environment where your staff will hold their hands up and take responsibility for mistakes but also get praised for success.

Finding that balance of accountability, delegation, and feedback is key to growing your business.

5. Enrichment Finally, E is for Enrichment. When your business has achieved great things and you’ve got all the money and time you need, it’s time to look for ways to enrich your life. Now is the time to think about building a legacy and leaving behind a life you’re happy with and proud of.

Think about someone like Bill Gates. He built an incredibly successful business and now does a lot of charity work. He has built success and now uses that success to enrich the lives of others.

WANT TO POWER UP YOUR BUSINESS IN 2022? ACCESS BRIGHT’S FREE BUSINESS TOOLKIT FOR CONTRACTORS AT: WWW.RDR.LINK/EAI016

PROFESSIONAL ELECTRICIAN July/August 2022 39

PE Page Grid_Layout 1 31/03/2021 08:59 Page 1

041_PE_JUL-AUG22_Layout 1 15/06/2022 16:12 Page 41

TEST EQUIPMENT & TOOLS

‘CHARGE’ POINTS OF REFERENCE

T

he demand for electric and hybrid vehicles has been rising steadily over the last few years and now, with government policy being implemented to ban the sale of pure internal combustion engine vehicles by 2030, this rise will continue exponentially.

As a result, the need for a comprehensive charging infrastructure is paramount, with charging points already found in public car parks, company premises and many domestic properties.

But is charging the vehicle batteries at these locations always safe?

As with any new electrical installation, the EV charging point circuit is required to be tested in accordance with the latest version of BS7671, to minimise the risk to individuals and their vehicles by ensuring the installation is safe. This brings in to question how a contractor can fully test the protective devices within the charge point itself.

Mode 2 or 3?

It is worth noting that EV charge points with a dedicated circuit that are used solely for the purpose of recharging electric vehicles, are described as Mode 3 Charge Points. Mode 2 uses a socket-outlet, with the cable between the

The experts at Megger offer guidance to ensure the safe testing of EV charging points.

socket-outlet and the vehicle incorporating an “In-Cable Control and Protective Device” (IC-CPD).

Mode 3 charging stations and charging points can operate with either a single phase 230 V or 3-phase 400 V AC supply.

They can generate very high currents to allow vehicle batteries to be charged in as short a time as possible. This continuous load can, however, cause faults or overloads in the electrical systems if not designed and installed correctly. This can lead to potentially dangerous situations.

For this reason, all charging points must be equipped with suitable protective devices which, in the event of a fault materialising, operate to remove the potential of electric shock, damage to a vehicle (or it’s batteries) or fire.

Therefore, periodic inspection and testing should be carried out on the charge point, as with any other electrical circuit, in accordance with the latest amendment of BS7671. Guidance on initial verification and periodic inspection and testing is given in the IET Guidance Note3: Inspecting and Testing and, upon completion of the required tests, either an Electrical Installation Test Report or an Electrical Installation Condition Report should be issued.

Be aware that special locations often require compliance with other regulations,

for example, inspection, testing and maintenance requirements for filling station installations should comply with APEA/EI publication: Design, construction, modification, maintenance and decommissioning of filling stations.

Who can test?

Any work carried out on an electrical installation must be performed by a suitably qualified electrician and/or competent person. The definition of this can be found in the latest version of BS7671. There are now specific Level 3 City & Guilds course designed to cover EV charging equipment installation in domestic, commercial and industrial and street applications, 2919-01 and 2919-02, that covers both the theory and practical aspects of installation and verification.

On completion of an installation or inspection, and before being put into service, the installation must be inspected and tested to verify that it complies to BS7671 as well as any charging equipment manufacturer’s specific instructions.

On completion, an Electrical Installation Certificate, together with any schedules of inspection and test or an Electrical Installation Condition Report shall be given to the client/owner. Megger CertSuite provides several specific EV

PROFESSIONAL ELECTRICIAN July/August 2022 41

041_PE_JUL-AUG22_Layout 1 15/06/2022 16:13 Page 42

TEST EQUIPMENT & TOOLS

Test Certificates that can be incorporated into these reports.

How is testing of a Mode 3 EV charge point carried out?

The following sequence of electrical and functional tests are detailed using the Megger EVCA210, along with the MFT1741+ Multifunction Tester: On completion of the installation of the charge point and the relevant fixed installation tests of the supply circuit, a number of additional tests are undertaken.

The required functional tests are: l PE Pre-test (confirming no potential on

the earth to vehicle) l PE Error (safely creates an earth fault or

missing earth on vehicle) l CP Error (safely creates a fault on AC

side of the charging circuit)

the charge point operates correctly in the event of a fault conditions.

Both tests require the charge point to be in a charge-required state. This is achieved by two rotary switches on the front of the EVCA210 that define both the proximity of a vehicle (vehicle connected) and the rate of charge required.

Details of the various adaptor settings can be found within the EVCA210 manual.

At this point it should also be confirmed that the interlock (if fitted) should prevent the connector from being removed.

l Mechanical interlocking of the

connector l Further tests as required or as

recommended by the charging point manufacturer.

The required electrical tests are: l Earth loop impedance l Testing of the protective devices (RCD

and RDC-DD) l Phase sequence (for 3-phase systems).

With the supply circuit turned on and the EVCA210 plugged in to the charge point, a PE Pre-Test must be carried out. This test is completed prior to any other testing to confirm no dangerous potential is present on the earth.

If a potential is indicated, further testing must cease, and the cause must be investigated and rectified as a potential high voltage may be present on the earth, giving rise to the risk of an electric shock to the operator or other persons nearby.

The PE Pre-test is easily completed using any EV adapter designed in accordance with the IEC/EN61851-1 and IEC/HD60364-7-722 standards.

Following the PE Pre-Test, two further functional tests are completed to ensure

Functional tests The first functional test is the PE Error. This safely simulates a PE conductor disconnection that, when pressed to initiate, should cause the EVCA to stop the charge process immediately and disconnect the charging circuit. Once released, the charge point should automatically reset and commence the charging process again.

The second is the CP Error. CP (Control Pilot) is the means by which a vehicle connected to the charge point communicates the level of charge current required. When pressed, the CP Error button should again cause an immediate disconnection of the charge point current and stop the charging process. As before, when released, the charge point should automatically reset and a new charging session start.

Following completion of the functional test, the electrical tests as defined above are then completed using relevant electrical test equipment. The Megger MFT1741+ model allows the user to complete all the tests required.

In the event of a 3-phase charge point being tested, a phase rotation test should be completed to verify the phases have all

42 July/August 2022 PROFESSIONAL ELECTRICIAN

been terminated correctly. Then a simple earth loop impedance value should be measured using a proprietary no-trip test to ensure the protective device in the charge point or distribution board does not disconnect.

Next, a complete RCD test must be undertaken. In addition, however, all new charge points installed today have an additional 6 mA DC monitor – or in some cases an RDC-DD – that ensures that no DC can be fed back into the utility supply.

This test is a simple DC ramp that should measure the leakage current and ensure that a trip occurs within the 6mA threshold and the allowed 10 seconds time.

Finally, if no vehicle is available, a simple load test can be carried out – to ensure that charge point is delivering the correct charge current – through the EVCA210.

This is limited to 10A for a short duration.

Mode 2 charging cable Even if a mode 2 charging cable is included with the electric vehicle, this shouldn’t be used as a permanent charging solution.

These mobile charging cables are intended for charging at standard 13A (BS1363) or industrial (BS EN 60309-2) sockets, when no permanently installed charging device is available. For regular operation, charging at a charging station or permanently installed charge point is recommended.

The combination of the EVCA210 and MFT1741+ will still allow the safe functional and electrical testing of a Mode 2 charging cable with a IC-CPD installed.

WATCH A DEMO VIDEO OF THE MEGGER MFT1741+ AND EVCA210 IN ACTION AT: WWW.RDR.LINK/EAI017

PE Page Grid_Layout 1 06/05/2022 10:10 Page 1

044_PE_JUL-AUG22_Layout 1 15/06/2022 16:27 Page 44

TEST EQUIPMENT & TOOLS

DOES YOUR EQUIPMENT MEASURE UP? Shaky hands, fat fingers or built-in errors? The team at GAMBICA, the trade association for the test and measurement industry, looks at some of the little known causes of errors.

T

hose working on or testing electrical installations need to know that their equipment is measuring accurately if they are to stay safe and their test results are to be valid. You may be used to thinking that any errors are the fault of your fat fingers but is that really the case?

In its publication, Measurement Accuracy, GAMBICA has married together impartial information from all the major suppliers of test and measurement equipment, offering a thorough explanation of how errors can occur in measurement, and also acknowledging the limitations of instruments and how they affect performance.

What is for certain is that no instrument can be guaranteed to give readings that are absolutely accurate every time or provide the exact same readings as another apparently identical instrument.

So, where do errors come from?

Errors that affect the overall accuracy of an instrument such as an installation multi-function tester can come from either the instrument or its accessories, or even from the circuit under test. The two most common types of measurement that can

suffer significant variation are Continuity and Loop Impedance. They each have their own sources of error which are detailed in the concise publication.

It’s not just errors you have to worry about…

BS EN 61557 is the European wide standard which defines the performance of test instruments used in the verification of low voltage electrical installations under 1000 V AC. It sets an internationally agreed minimum performance to which all instruments must conform. This includes the test range, the types of test necessary and the minimum accuracy required.

“So that’s OK then”, we hear you thinking; “If I buy an instrument which conforms to BS EN 61557, I’ll be alright!”

Well yes, up to a point…

As an engineer you’ll often find yourself working at the upper or lower limits of an instrument’s capabilities. It is under these conditions that variations in resolution and accuracy have the greatest effect.

Awareness of the precise limitations of your equipment is essential to ensure correct application of a test and interpretation of results.

It all comes down to range, resolution, accuracy and display count. If you don’t

44 July/August 2022 PROFESSIONAL ELECTRICIAN

understand these properly, you can find yourself making poor or even dangerous assumptions.

Transparency of accuracy is vital No instrument can provide perfect measurements in all conditions. But every instrument should declare an accuracy within which it should perform for any measured value.

This performance is checked during manufacture against stable, reference sources under laboratory conditions, and should be checked periodically to ensure they remain within their stated accuracy.

Does your instrument offer the accuracy you need for your task?

Don’t confuse accuracy with display count. Some digital instrument manufacturers, especially when it comes to digital multi-meters, publish additional or alternative information about the measurement display. This is expressed as a “display count”.

A display count is useful in understanding the resolution of a measurement on each measurement range, and when the range changes up or down a decade, but it doesn’t tell you anything about the accuracy.

It is important to understand both how the accuracies of instruments are defined

044_PE_JUL-AUG22_Layout 1 15/06/2022 16:27 Page 45

resolution of 0.01 Ω cannot be guaranteed to give accurate results.

Always try to make the measurement with an instrument where the expected values are well within the limits of the instrument.

Where this isn’t possible, understanding the effects of different types of error can help in assessing whether the measured results are dependable or whether other methods of assessing the circuit’s characteristics would be more appropriate, such as calculated values based on manufacture’s declared data or considering an unenergised impedance reading. Both of these methods can help to avoid an argument with the consulting engineer’s calculated values.

and the sources of error in measurement, especially where the values are at the extremes of the instrument’s measurement ranges. For example, many loop impedance

testers are used for measuring close to the source of the supply, where loop impedances can be very low – certainly less than 0.03 Ω. Using an instrument with a

This article has only been able to give you a taster of the new GAMBICA Measurement Accuracy publication. If you’d like to request a free copy, please email: jacqueline.balian@gambica.org.uk

046_PE_JUL-AUG22_Layout 1 15/06/2022 16:32 Page 98

TEST EQUIPMENT & TOOLS

Proving dead effectively and safely is vital when it comes to safe isolation and the safeguarding of people and assets, as Steve Dunning, MD of Martindale Electric, explains.

A ‘DEAD’ CERT

P

roving dead sounds relatively simple, but choosing the right equipment to support the safe isolation process is key. By creating a complete safety system, along with implementing a high level of training and ensuring that a proving unit and lock off kits are always available and used, margin for error is reduced and points of failure are minimised.

What should you be doing?

Firstly, has permission for safe isolation been obtained? If so, identify the point of isolation, lock it off and place warning tags onto the equipment. Lock-off kits are available to ensure that the right locking-off device is always to hand.

A basic lock-off kit should include a selection of MCB and breaker locks, a padlock with a unique key, a hasp (if more than one person is working on a system) as well as lock-out tags and warning labels.

If an accident were to occur, it’s not enough to say that you didn’t have the right device for the breaker because you could isolate the board. If you’re able to turn equipment off but can’t isolate it at the point of connection, trace the supply back to a point where it can be safely locked off. There is no point in proving dead if someone else comes along and restores power without your knowledge.

A major problem encountered when working on existing sites is the lack of comprehensive circuit labelling. Even in cases where circuits appear to be properly labelled, alterations are often

made by unqualified or untrained staff. Even if the changes are safe, the labelling may frequently be incorrect.

Voltage indicators When choosing the right voltage indicator (VI) for a particular application, whether for residential projects, commercial or industrial facilities, reliability is crucial.

Always ensure that the unit you’re purchasing complies with BS EN 61243-3, such as the VI13800 voltage indicator from Martindale Electric, which has been specifically designed to meet this regulation. When choosing the right VI, one of the main factors that set many units apart is a 1000V CAT IV safety rating following BS EN61010, as referenced in BS EN 61243.

It is this safety rating, which ensures the product can cope with the risks from hazardous transient impulses on the mains supply system, which makes indicators such as the Martindale VI15000 and MTL15 suitable for supply-side LV applications in all installation categories as defined in the standard.

That means that wherever you’re working, you can be confident in having a voltage indicator that is properly rated for the application. BS EN61010-1 Installation Categories (CAT ratings) are based on where you’re working.

46 July/August 2022 PROFESSIONAL ELECTRICIAN

Test and test again The next step is to test for dangerous voltages on any circuit conductor to be worked on, whether single or three-phase. It is recommended to use a dedicated proving unit matched to the VI to fully test that all LEDs on all ranges are working. A proving unit is safer than the mains and provides a live source wherever you’re working.

If there is no voltage detected and the circuit is dead, then the operator should proceed to re-test the VI using the proving unit. If it’s working correctly, then the operator has proved dead and the system is safe to commence work.

For increased efficiency, Martindale Electric has introduced complete safe isolation kits, bringing together all the necessary equipment to prove dead and lockout the circuit being worked on.

BROWSE THE MARTINDALE SAFE ISOLATION KITS AT: WWW.RDR.LINK/EAI018

PE Page Grid_Layout 1 07/06/2022 09:40 Page 1

048_PE_JUL-AUG22_Layout 1 15/06/2022 16:35 Page 48

TEST EQUIPMENT & TOOLS

The team at Bosch examine the key features you should be looking for in a thermal imaging camera.

THE RULES OF THERM

W

hat is a thermal imaging camera?

Thermal imaging is a method of detecting and measuring temperatures, through the process of converting infrared radiation into visible images which use colours to represent different temperatures. Thermal imaging technology can be used to locate both hot and cold spots in seconds, and this can be achieved at safe distances (up to 1.5m) due to being a non-contact method of measurement.

Quickly analysing the current situation, clarifying the requirements for preparing an offer, and checking and documenting work results – Bosch thermal cameras make it easier to perform many common tasks. In the range, Bosch currently has two precise and versatile Professional Thermal Cameras – the GTC 400 C and GTC 600 C. These tools can help identify weak spots as well as thermal bridges, for example, overheating of structural components such as switch cabinets.

systems, cables, or equipment. This allows for easier and more efficient diagnosis of faults, therefore increasing productivity.

Thermal cameras have many benefits for electricians. They allow you to detect faulty components earlier, for example, by investigating unusual hot spots before it leads to failure. Conversely, a component that has already failed may not heat up in the same way and show up as a cold spot.

A major benefit to catching problems early is reduced repair costs, and also being able to visually show clients where the fault lies for accurate quotes.

Applications for electricians Thermal imaging cameras are an extremely useful tool that can be used during electrical inspections. They can check electrical components and pinpoint failures in

48 July/August 2022 PROFESSIONAL ELECTRICIAN

What should you look for in a quality thermal imaging camera?

Resolution With thermal imaging, resolution comes in two components: the infrared sensor resolution and number of pixels on the display. The higher the sensor resolution, the more accurate and clearer a single measuring point will be. This is essential if the job at hand requires measuring smaller objects at further distances. Pixel size indicates the level of detail that the screen displays. The higher number of

048_PE_JUL-AUG22_Layout 1 15/06/2022 16:35 Page 49

TEST EQUIPMENT & TOOLS

pixels, the sharper and more detailed the image quality. A combination of high sensor resolution and high number of pixels will give you the clearest quality. ( 5$ $ (5$ $

( 5$ $ (5$ $

**3 3 SFTPMVUJPO SFTPMVUJPO

Y Y

Y

Y

/VNCFS PG QJYFMT /VNCFS PG QJYFMT

Temperature measurement range Thermal imaging cameras come in a variety of measuring ranges, so it is important to choose a model that covers the range needed for your job. The latest model from Bosch, the GTC 600 C, hosts an impressive range from -20°C to +600°C, providing additional applications in many environments.

5FNQFSBUVSF SBOHF 5 FNQFSBUVSF SBOHF

(5$ $ ( 5$ $

(5$ $ ( 5$ $

¡$ UP ¡$ UP ¡$ ¡$

¡$ UP ¡$ ¡$ UP ¡$

Connectivity An extremely useful feature is the ability to store and export data. The GTC 400 C and 600 C are both equipped with a Wi-Fi module, which the tool uses to establish its own Wi-Fi hotspot. You can connect your smartphone or tablet to the tool and import the thermal images, including the measured data, via the Bosch Thermal App. This makes it possible to process information immediately and pass it on quickly to your customers or colleagues.

Alternatively, all data can be transferred to a PC via USB-C cable and processed there by means of the free GTC Transfer Software. The GTC 400 C can store up to 500 images, whilst the GTC 600 C can store up to 600.

Furthermore, the GTC 600 C now hosts a new voice note function, allowing you to add a voice note up to 30 seconds long to recorded images. The voice note is easily and conveniently recorded via the integrated microphone and saved in the gallery together with the real and thermal image. This avoids assignment errors, making documentation even easier.

All Professional Bosch power tools have a one-year warranty, which can be extended to a total of three years if the tool is registered on the Bosch Professional website within the first month of purchase.

WATCH A FULL DEMO VIDEO OF THE BOSCH GTC 600 C THERMAL CAMERA AT: WWW.RDR.LINK/EAI019

SHOULD YOU TEST AN SPD?

Kirsty Johnson, Technical Sales Director at Surge Protection Devices, answers a common question that installers will often raise.

W

ith the increase in the application of surge protection devices to our electrical installations, we’ve seen an increase in testers being marketed as being capable of testing SPDs. This therefore raises the question: should we test SPDs? The simple answer is ‘no’. Any test on an SPD will involve passing voltage though the device to ensure activation. This passing of the voltage will degrade the components within the SPD and therefore shorten the lifespan of the device.

The SPD doesn’t know the difference between voltage for test purposes and a surge, which it is designed to remove from circuits.

Certificate of conformity SPDs have certificates of conformity to demonstrate that they’re built to the relevant part of the BS EN 61643 series for that type of device. If the SPD is unable to provide protection, whether this is due to a fault within the device itself or that the device has come to the end of its lifespan, the indication on the device will show the failure.

Simple explanation Realistically, any simple tester that can apply voltage will demonstrate that the SPD will activate when required. Just because you can do something, it doesn’t necessarily mean that you should!

GET MORE DETAILS ON THE SPD TRAINING ACADEMY AT: WWW.RDR.LINK/EAI020

PROFESSIONAL ELECTRICIAN July/August 2022 49

050_PE_JUL-AUG22_Layout 1 15/06/2022 16:37 Page 50

Working on your own? Need some technical advice? Don’t know where to turn? Ask Megger. What it doesn’t know about installing and testing electrical systems isn’t worth knowing. Every question will be answered by the Megger Technical Team, and the best will be published in Professional Electrician. So, take advantage of the ‘every question answered’ guarantee today. email your questions to: meggermeasures@hamerville.co.uk

You ask: I NEED A TESTER FOR MAKING QUICK VOLTAGE AND CURRENT MEASUREMENTS AND ALSO TO USE AS A VOLTAGE INDICATOR (TWO-POLE TESTER). I NEED TO BE ABLE TO WORK WITH AC AND DC VOLTAGES UP TO 1,000 V. DO YOU HAVE ANY RECOMMENDATIONS?

Megger says: Our suggestion is the new Megger MET1000 all-in-one tester. It measures AC and DC voltage up to 1,000 V, AC current up to 200 A, and resistance up to 50 kΩ. For AC voltage and current, the measurements are all true RMS. The voltage measurement function continues to operate even if there are no batteries in the tester or if they have run down. This means it complies with EN 61234-3:2014 so you can use it as a two-pole tester for safe isolation testing.

Other important benefits of the MET1000 are that it can be used on circuits protected with RCDs and RCBOs without tripping the devices, it has a large digital display with a data-hold function, and it also has a bright built-in torch that’s a big help when working in poorly lit locations. In addition, the test probes are detachable and can be easily replaced if they become worn or damaged.

The MET1000 even comes with a carrying holster with a belt loop, so it’s easy to take with you everywhere. We’re confident it’s just what you’re looking for!

BROWSE THE MEGGER MET1000 PRODUCT DATA SHEET AT: WWW.RDR.LINK/EAI021

50 July/August 2022 PROFESSIONAL ELECTRICIAN

051_PE_JUL-AUG22_Layout 1 15/06/2022 16:37 Page 51

TEST EQUIPMENT & TOOLS

MAXIMUM DEMAND AND LOAD MONITORING

Julian Grant, Managing Director of Chauvin Arnoux, discusses the value of energy monitoring and measuring equipment as the demand on electrical systems continues to increase.

M

any domestic installations today are seeing changes in the nature of the electrical equipment being installed in them, or requested to be installed in them, and notably the addition of some fairly high current loads, including most recently heat pumps and EV chargepoints.

Domestic air source heat pumps can typically consume from 3kW to 7kW (13A to 30A) of electricity, dependent on the size of the unit, the temperature settings, the weather conditions, and the thermal insulation efficiency of the property.

Add a single-phase home EV charger, which could require another 7kW (30A), and bearing in mind all of the other potential “electricity hungry” appliances in the installation, such as showers, water heaters, hot tubs, ovens, etc. and it's easy to see the issue.

Full to capacity In the best of cases the installation will already be served by a 100A main fuse, however, it is more likely that an 80A or

even 60A fuse may be present. Either way, conventional maximum demand and diversity calculations, as described in the On-Site Guide, are increasingly revealing situations where a large part of the capacity may already be taken up, leaving insufficient headroom for any desired or required additional loads.

In the 60A/80A main fuse scenario, a larger fuse could be requested, but the immediate granting of these may not necessarily be straightforward, or cost-free, depending on the local supply capacity and the nature and rating of the equipment and cable feeding the property. So where does that leave the property owner and the electrical installer?

Well, there’s potentially another way to look at the maximum demand of the installation, referred to by the Energy Network Association (ENA) in their guidance on connecting electric vehicles and heat pumps to the network, and that is to measure and monitor it. In this scenario electricity demand data is measured and recorded, ideally over a

PROFESSIONAL ELECTRICIAN July/August 2022 51

051_PE_JUL-AUG22_Layout 1 15/06/2022 16:38 Page 52

TEST EQUIPMENT & TOOLS

your own office, and providing knowledge of the monitoring results prior to re-visiting the customer. This in turn means a considered proposal can be put together and presented when the product is retrieved. two-week period at ten-minute intervals, before being analysed to arrive at an accurate maximum demand figure.

This “evidenced” load assessment will often reveal spare capacity, where diversity calculations did not, or at the least could indicate the times when spare capacity may be available. This could, for example, enable the fitting of a smart EV charger that incorporates load monitoring to ensure maximum demand isn’t exceeded, and with the knowledge that it will actually be able to charge an electric vehicle for significant periods of time without being throttled down.

A logger can get you out of the jam A simple and non-intrusive way to monitor and measure energy use over time would be to temporarily install a modern portable energy logger (PEL), such as the PEL103 or PEL104 from Chauvin Arnoux. PELs can be installed quickly and non-intrusively at the distribution board, in many cases without even having to turn off the supply.

They will log electrical energy data over any time period you choose – hours, days or weeks – so that you can get a detailed picture of the electricity usage.

But that’s not all a PEL will tell you.

Another important concern with EV

chargepoints, for example, are harmonics.

The supply system is AC, but to charge a vehicle battery you need a DC supply, so at some point in the charging system – either in the charger itself or in the vehicle – there is going to be a rectifier. Rectifiers are inherently non-linear loads that generate harmonics, and if the harmonics in the installation are too great all sorts of strange anomalies, and a general reduction in the electrical efficiency of the installation, may occur.

A PEL will give you accurate information about any harmonics that already exist in the installation, perhaps as a result of LED lighting, IT equipment, or the plethora of other non-linear loads that exist today, once again logging this information over a period of time.

When it comes to retrieving information from a PEL, apart from the obvious process of going to the installation and downloading the contents from the instrument’s internal memory via a USB connection, the latest generation PEL104 from Chauvin Arnoux has been provided with additional communication options such as Wi-Fi, 3G and GPRS. This makes it possible to establish a remote connection to the PEL, enabling analysis of the data from the comfort of

52 July/August 2022 PROFESSIONAL ELECTRICIAN

Other useful applications In other situations, having a PEL with remote data access makes it possible for users to set alarm limits for most key parameters and, if these are exceeded, the PEL can be set up to immediately alert them via the remote connection – whatever type that may be. In addition, the PEL can be configured to email reports of selected parameters at regular intervals chosen by the user.

As we’ve seen, a PEL is a very useful asset for load monitoring and maximum demand calculations when planning the installation of high-power electrical equipment, and also after the installation is complete, to verify that the loading and harmonics are within expected limits.

Apart from that, a PEL will effectively monitor and measure any supply you connect it to and can check for 3 phase voltage and current balance, frequency, power factor, harmonics, and any unexpected out-of-hours electrical usage.

A truly useful tool that could add a lot to your business!

BROWSE THE CHAUVIN ARNOUX PEL100 SERIES BROCHURE AT: WWW.RDR.LINK/EAI022

PE Page Grid_Layout 1 07/06/2022 09:49 Page 1

054_PE_JUL-AUG22_Layout 1 15/06/2022 16:38 Page 54

TEST EQUIPMENT & TOOLS

Reece Hardy gets to put the IDEAL Industries 61-347 Digital Multi Meter through its paces.

“A MULTITALENTED METER”

T

he IDEAL 61-347 Digital Multi Meter is a CAT IV 600 CAT III 1000V rated auto ranging true root mean square (TRMS) digital multi meter that measures up to 10 Amps AC and DC current via the test leads in series with the load.

This new range of multi meters consists of four models in total – ranging from the 61-327 through to top-end 61-357 – all designed to cover every operator experience level.

I was given the opportunity to trial the 61-347 which has a large 6000 count display and is guaranteed for two years. It arrived complete with a soft belt case, user handbook, test certificate, test leads and K-Type Thermocouple.

The unit is capable of measuring 1000V AC, 10 Amps AC and DC, capacitance, resistance (continuity/diode), and temperature (via the K-Type Thermocouple), amongst other things.

Non-contact voltage is sensed by a pickup toward the front and the display shows EF. The item is True RMS for AC voltage and current and it also has a display alarm for voltages over 30V. The battery compartment holds 3 x AAA

type cells and fellow users will notice two distinctive fuses – if either of these fuses for current reading are open circuit, the meter will display FUSE to alert the user.

In use, the meter has a fold out stand and features a protective soft shell jacket around the unit to protect it from bumps and dents.

The grooves on the rear of the product can park the probes and they’re also able to project one probe for two handed (or one handed with 4mm plug lead) use.

Putting it to the test So, how has it fared? I’ve found that most situations you’re likely to come across can be handled using this DMM, with the only advantage of the next meter up in the series (61-357) being that it offers low impedance for current and a bar graph display.

I’m a big fan of the exceptionally large display, which allows for long distance viewing, and I’ve found the unit to be very comfortable to hold (weighing in at a little over 500g) and exceptionally easy to use.

The backlit option on the display also provides the user with the capability to make readings out in darker conditions.

One feature that I particularly like is that

54 July/August 2022 PROFESSIONAL ELECTRICIAN

the 61-347 uses an illuminated red LED in the centre of the meter and will emit audible tones to notify when voltage is above 30 V, when continuity is detected and when the NCV senses voltage within its set range.

The rubber boot has two probe storage points, and built-in probe tip holders to allow measurements while holding the meter in one hand and the second lead in the other hand.

The meter also has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface.

Additionally, an industrial grade over-moulding enhances grip and drop protection. I also really like the easy open, fully accessible storage pouch with a belt loop that allows for meter, probes and thermocouple storage.

If you’re in the market for a quality, reliable DMM, I’d recommend taking a look at this product.

BROWSE THE 61-347 IN THE IDEAL T&M CATALOGUE AT: WWW.RDR.LINK/EAI023

055_PE_JUL-AUG22_Layout 1 15/06/2022 16:39 Page 98

ADVERTISING FEATURE

CUT DOWN RCD TRIPPING WITH THE ETHOS 3650

With the 18th Edition requiring that earth leakage currents remain under 30%, reducing nuisance RCD tripping is of critical importance. Here, Ethos Instruments explains more, and details why its Ethos 3650 is the ideal testing device for this requirement.

T

he 18th Edition came into force in January 2019, and a new requirement is needed to check the cumulative leakage on an installation, with specific values to check. The 18th Edition now makes it clear that the accumulation of circuit protector currents/earth leakage currents which are present during normal operating conditions shall not be more than 30% of the rated residual operating current of the RCD.

Integral testing solutions The Ethos 3650 – 200A digital earth leakage clamp meter – is an integral part of an electrician’s test equipment, and is perfectly safe and simple to use.

Not only does it help identify where RCD tripping may occur, but it also provides the following features:

Reducing nuisance RCD tripping To reduce nuisance RCD tripping that isn’t due to a fault, but the result of cumulative leakage currents from appliances, the 18th Edition now includes specific values for maximum protective earth currents (Regulation 531.3.2). This is a great help in identifying when division of the installation is required, and wasn’t a part of the 17th Edition. But what are acceptable limits for leakage current, and how do you know when you’re approaching the limits?

The 18th Edition states: the accumulation of circuit protector currents/ earth leakage currents that are present during normal operating conditions shall not be more than 30% of the rated residual operating current of the RCD e.g. a PE current of no more than 30% of 30mA, which is just 9mA. This is necessary when you consider that it’s not unusual for a 30mA RCD to trip just above 15mA. The trouble is, how do you know when you’re approaching 9mA? Computers, printers and other appliances can easily generate leakage currents in the range of 1mA to 3.5mA each.

- Three settings at 200mA, 2A, and 200mA - Resolution at 200μA on 200mA setting - Data hold - Auto power off - Max hold - Backlight - Shielded transformer jaws.

The Ethos test equipment range is designed to meet the needs of the most demanding electrical engineers and contractors making their job faster and easier, whilst helping the user comply with the latest legislation. Ethos products form a full range of test equipment with features to suit users of all levels.

The perfect fault-finding solution The Ethos 3650 is also a fantastic device when it comes to fault finding. The first thing the user should do is place the 3650 digital earth leakage clamp meter around the meter tails that are being tested. If the

user observes an inconsistent reading that is varying from one second to the next, this may be an indication that there could be a fault somewhere in the system. In this scenario, Ethos recommends switching off MCBs and then turning them back on individually to locate the source of the fault (the reading on the Ethos 3650 will make it clear which circuit is causing the issue).

To find a fault on the circuit and identify which circuit it is (for example, a lighting circuit), if the cables are accessible try and judge where the middle of the circuit is and clamp the Ethos 3650 around the outgoing line and neutral conductors.

If there still appears to be a fault then it is further along the circuit, but if the fault has gone then it is further back towards the consumer unit. This allows you to quickly identify the offending item that’s causing excessive leakage.

GET MORE DETAILS ABOUT THE ETHOS 3650 AT: WWW.RDR.LINK/EAI024

PROFESSIONAL ELECTRICIAN July/August 2022 55

NEW STYLE ELEX MAG AD 285 PE_Layout 1 27/04/2022 10:35 Page 1

ELEXSHOW

THE TRADESHOW FOR PROFESSIONAL ELECTRICIANS PROFESSIONAL ELECTRICIAN

Sponsored by

The Electricians’ Exhibition

Leading brands, live demos, tech talks, show specials – all under one roof!

FORTHCOMING SHOWS: CBS ARENA, COVENTRY 14TH/15TH SEPTEMBER 2022 WESTPOINT ARENA, EXETER 20TH & 21ST OCTOBER 2022 SANDOWN PARK, SURREY 3RD & 4TH NOVEMBER 2022

Register for free at www.elexshow.info

057_PE_JUL-AUG22_Layout 1 15/06/2022 16:40 Page 57

PRODUCTS & BUSINESS SOLUTIONS

SMART CHARGING REGS: WHY IT’S ALL CHANGE

We knew that the day was coming, but what constitutes the new smart charging regulations? We discuss the new legislation with Zak Lee, Head of Technical at Sevadis.

T

he UK is experiencing a surge in the registration of electrified transport, whether that be for personal or professional purposes. Most electric vehicle drivers recharge their vehicles at multiple destinations; the home, the workplace and the public environment.

However, there is concern about whether the grid can essentially ‘cope’ with the increasing demand and that’s why The Electric Vehicles (Smart Charge Points) Regulations 2021 has been introduced.

Charging points sold in the UK for private use (domestic) face regulations to support managing the growth in electricity demand as a result of the EV revolution.

The regulations are in place to ensure that EV charging points possess ‘smart’ functionalities, enabling EVs to recharge when there is less demand on the grid, or when more renewable and cleaner electricity is available.

In addition to this, the regulations are implemented to ensure that charging points meet specific device-level requirements, providing a minimum level of access, security and information for customers of the charging points.

What does this mean for EV charging point installers? As of 30th June, all charging points installed for private

purposes must adhere to the smart charging regulations. This doesn’t apply to installations that have commenced or been completed before the date of the regulation’s implementation.

Charging points must have the following capabilities to comply with the regulations: Smart functionality Charging points must be equipped with smart functionality to send and receive information, the ability to respond to signals to increase the rate or time at which electricity flows through the charging point, demand side response services and a user interface, for example, an App for charging.

Electricity supplier interoperability Charging points must retain smart functionality, even if the owner of the charging point decides to switch their electricity supplier.

Continued charging Charging points must be able to continue charging the electric vehicle even if the charging point ceases to be connected to a communications network.

Safety provisions Charging points must be equipped with safety provisions in order to prevent the

user carrying out an operation which could risk the health or safety of the user.

A measuring system Charging points must have a measuring system in place to calculate the electricity imported and exported and the time the charging lasts. This information must be visible to the owner of the charging point.

Security Charging points must be consistent with the existing cyber security standard ETSI EN 303 645. Charging points must also incorporate pre-set, off-peak, default charging hours, while allowing the owner to accept, remove or change these upon use.

The regulations also state that all charging points must allow for a randomised delay function.

The implementation of the smart charging regulations has been a long time coming; standardisation of EV charging points is crucial for the roll-out of the nation’s EV charging network.

At Sevadis, all of our charging points are compliant to the new regulations, ensuring electrical professionials can offer reliable charging solutions to customers.

BROWSE THE SEVADIS RANGE OF CHARGING SOLUTIONS AT: WWW.RDR.LINK/EAI025

PROFESSIONAL ELECTRICIAN July/August 2022 57

058_PE_JUL-AUG22_Layout 1 15/06/2022 16:41 Page 58

PRODUCTS & BUSINESS SOLUTIONS

Eager to give his legs an airing in summer working conditions, Graham Anslow of Anslow Electrical slips into some of Snickers Workwear’s LiteWork shorts and t-shirts.

I

’ll start by confessing that it’s been a little while since I’ve worn Snickers garments for work purposes, as I had a bad experience previously with some workwear that prematurely ripped.

Willing to give things another try, I was given some of the latest gear from the LiteWork range – shorts (6110) and t-shirts (2511 short sleeved) – and will admit to be very impressed indeed.

Firstly, any issues with ripping have been alleviated by the clear use of different fabrics so the garments can flex much more easily.

Secondly, as the name suggests, the LiteWork garments are light enough to make you feel that you’re not actually wearing anything at times. They’re super comfortable and make working in hot conditions infinitely more bareable.

“YOU WON’T BE LEFT SHORT” I’ve tried out the ‘true blue’ 2511 t-shirt, which nicely matches my company colours, and the shorts have a bright blue detail on the zips with some reflective materials to make you more visible.

Pick a pocket or two On the left hand side of the shorts you’ll find two zip pockets, which are really handy for keeping your smartphone or loose coins/keys clean and tucked away during the working day.

There are also two lower front pockets which are cut on an angle – I’ve not seen this type of thing before but it actually makes a lot of sense in terms of accessibility for the user.

The same can also be said for the back pockets which are also cut at an angle, with no flaps that get in the way – a good feature!

58 July/August 2022 PROFESSIONAL ELECTRICIAN

The t-shirt immediately made me feel comfortable in the hotter weather and I’m a real fan of the fit and feel. Details of the established date (1975) are featured in bold down the left hand side which is a smart touch, as is the bright yellow logo.

Overall, I would recommend these to anybody that wants to keep cool on-site while looking the piece at the same time – the quality is some of the best I’ve tried.

I’m now looking at investing in some other items in the range, such as trousers and hoodies to match.

Sweating buckets while stuck in boiling hot loft spaces may well be a thing of the past for us sparkies!

BROWSE THE FULL SNICKERS LITEWORK RANGE AT: WWW.RDR.LINK/EAI026

ADGRIDS_PE_ADGRIDS.PMM_May06 08/06/2022 10:11 Page 59

060_PE_JUL-AUG22_Layout 1 15/06/2022 16:43 Page 60

PRODUCTS & BUSINESS SOLUTIONS

Gurjeev Bola, UK Product Manager for Werner, looks into the key benefits of fibreglass ladders and why they are a great choice for installers working in diverse environments.

LIVING IN A MATERIAL WORLD

E

ach year around 1,000 accidents at work involving electric shocks or burns are reported to the Health and Safety Executive (HSE). Whilst it might seem an obvious consideration, there are still a worrying number of tradespeople who don’t use non-conductive ladders here in the UK. Many workers from across the electrical industry experience shocks from ladders that are not suitable for the job, mainly made from material that is not designed to withstand electrical shock. Despite being what, to many, may seem an obvious consideration, there are still installers who either don’t use fibreglass ladders, or who aren’t supplied with one by their employer.

Why fibreglass?

Whilst fibreglass has many benefits over other materials, its key feature is its non-conductivity. This feature is a prerequisite for those working near electricity, for undertaking electrical contracting jobs or for domestic electrical works.

Inherently strong and robust, not only is fibreglass the perfect solution for working

around electricity, the material is also extremely resistant to weathering and does not absorb moisture, like a wooden ladder can, making it ideal when working in wet or damp environments.

Unlike aluminium, the material is also non-marking, and offers high resistance to denting and twisting and won’t weaken over time like other materials can, which will invariably impact the strength and integrity of the product. It also offers greater comfort by being warmer to the touch and retains its smooth surface over the duration of its lifetime.

Reducing the risk Regardless of the project, when it comes to working at height, choosing the right equipment is key. It is vital that workers adhere to the Working at Height regulations to reduce the risk of injury through falls or shocks.

Prior to embarking on any job, a risk assessment should be completed.

According to the HSE, workers should ensure that equipment is suitable, stable and strong enough for the job, maintained and checked regularly.

A pre-use ladder check should be completed before every use and also

60 July/August 2022 PROFESSIONAL ELECTRICIAN

060_PE_JUL-AUG22_Layout 1 15/06/2022 16:43 Page 61

when a ladder is moved from one job to another to ensure that it is fit for use. Doing these checks every day will help ensure any problems are found straight away and are dealt with before an accident occurs.

It is also a requirement to have a ladder inspection label to show that a ladder is safe to use. There are two different ladder inspection labels – the first is a ‘passed’ label, that comes in green or blue, which lets you know a ladder is safe to use. The other is a ‘failed’ label which will be red and have the dates that the ladder was inspected and the name of the person that inspected it. This means clearly, that the ladder is not suitable to use as it has failed a safety inspection.

Added extras Of course, when it comes to working around electricity, the number one consideration for working at height equipment should be the material, but other factors to consider include ensuring work can be completed safely. Can three points of contact always be maintained, will the project take longer than 30 minutes (if so, a ladder may not be appropriate), and does the ladder enable the safe storage of tools to reduce trips up and down the ladder?

Taking all of these factors into consideration prior to embarking on a project will not only ensure that correct equipment is used, therefore reducing the risk of shocks, injury or accidents, it can also make a job less time-consuming, saving money in the long run.

BROWSE WERNER’S RANGE OF FIBREGLASS LADDERS AT: WWW.RDR.LINK/EAI027

ADGRIDS_PE_ADGRIDS.PMM_May06 09/06/2022 08:09 Page 62

063_PE_JUL-AUG22_Layout 1 15/06/2022 16:45 Page 63

PRODUCTS & BUSINESS SOLUTIONS

DON’T GET BITTEN BY ‘VAMPIRES’

The team at Knightsbridge look at some of the ways that you and your customers can ‘outsmart’ the cost-of-living crisis.

W

ith the recent increases in energy rates, consumers are under pressure to save money. One major drain on budgets are 'vampire appliances’. Consuming power even when not in use, these appliances cost households hundreds of pounds per year.

According to British Gas (BG), up to 23% of residential electricity usage can be due to 'vampire energy' drawn by phone chargers, set-top boxes, monitors, printers, and other devices that continue to take power when not in use or on standby.

A modest estimate from the company said that appliances on standby cost homeowners £147 per year on average, while in larger homes or those with more electronics, it could be up to £300 per year. The total cost in UK domestic energy amounts to around £2.2bn.

A list published by the Mirror in March related that the top five most expensive devices included Sky boxes, which can consume 30W, at more than £70 each year and laptop chargers at £60 a year.

With our modern homes being laden with gadgets, it’s easy to see how it all soon mounts up.

Smart thinking Consumer demand for smart accessories initially sprang from the novelty, convenience and versatility afforded by such devices. However, now, in the midst of the cost-of-living crisis, additional benefits come to the fore, such as being able to better manage energy-burning

equipment through voice or App control.

Interestingly, Knightsbridge’s last survey of over 1,000 electrical contractors revealed that a high percentage of the trade were very much aware of smart technology but there was less confidence about installing smart products. Happily, that’s where the latest range of Knightsbridge smart products comes into its own.

Find your voice At the heart of the Knightsbridge range are two 13A, 2-gang, smart switched sockets that can be controlled remotely or by voice.

The sockets, which were designed to match the company's existing square and curved edge accessory ranges, have a power monitoring function that displays live power usage in kWh and a green LED that indicates which gang is in use.

For outdoors, there is an IP66, 2-gang switched socket with a range of up to 40m, depending on Wi-Fi coverage.

The range also includes a 16A smart plug adapter, a 10A 3-gang smart extension lead with a quad USB charger, and smart motion and entry sensors to help extend the smart capability of the home.

Designed to be easily installed and quickly configured into Knightsbridge’s user-friendly SmartKnight App, the wiring accessories and lighting products can be controlled via a smartphone. To get started the user simply downloads the SmartKnight App to their smartphone from either Google

Play or the Apple App Store and follows the instructions.

Getting connected Once downloaded they’ll be able to take advantage of a variety of features, including timers, schedules, scenes, and geo-fencing. Users can also issue instructions to either Alexa or Google Assistant to turn on downlights or turn off connected appliances.

The Knightsbridge range of smart products makes use of existing home routers to install a simple-to-use smart system that provides ease, flexibility, and scalability – and, most crucially, cheaper energy expenses.

BROWSE THE KNIGHTSBRIDGE DIGITAL CATALOGUE AT: WWW.RDR.LINK/EAI028

PROFESSIONAL ELECTRICIAN July/August 2022 63

064_PE_JUL-AUG22_Layout 1 15/06/2022 16:45 Page 64

PRODUCTS & BUSINESS SOLUTIONS

SMARTER HOMES FOR ALL Andy Douglas, MD of Timeguard, looks at the range of products available that can help turn you into a smarter installer.

W

hat does the term ‘smart home’ mean to you? On the one hand there are the mega mansions with mood lighting, high security, curtains that open and close by themselves and, in all probability, a home cinema. It’s fabulous business for the specialist installers who put it all together, but beyond the budget of most homeowners.

At the other end of the scale, we see the automatic doorbells and cameras that are usually designed for DIY installation and of course, doing the smart bit by letting you watch what’s going on.

However, the DIY approach can also go horribly wrong, as one man found last year, when a judge agreed that the positioning of his cameras had placed a neighbour under continuous visual surveillance and awarded damages against him.

Neatly bridging this gap is the new generation of smart Wi-Fi controls for professional installation. These are most definitely in demand as people tire of unreliable DIY gadgets. Currently, the main

focus for most people is ‘energy saving’, and they are buying in to hard wired smart Wi-Fi accessories that can give them remote control of their energy-guzzling appliances, turning things on and off or adjusting time settings from a smartphone.

So, look out for smart wall sockets, in-line adaptors and fused spurs with Wi-Fi control at the wholesalers and you can win the business that’s there for the taking.

What should you look for?

Twin Wi-Fi wall sockets can offer daily and weekly timing programmes and countdown timing, with each socket under individual control.

Alternatively, in-line adaptors can bring quick and easy Wi-Fi functionality to pretty much any device or appliance and are proving particularly useful to automate an existing light fitting. Remember, UK wall switches have no neutral so designing-in reliable Wi-Fi controlled switches as direct replacements has proved to be elusive.

Now, ‘In-line’ Wi-Fi connectors are simply wired-in in series and can be popped through the ceiling aperture. Or they can be wired in-line with the power cord of an appliance. This summer sees the introduction of a weatherproof version

for outdoor use from Timeguard.

Smart fused spurs are easy replacements for basic spurs, especially as the mains wiring is already in place.

They can provide remote time control to wall and immersion heaters, towel rails, appliances like washing machines and dryers, and outdoor or display lighting.

Timeguard has Wi-Fi controlled security covered too with its integrated Wi-Fi camera, built to simply plug into any of its NightEye outdoor LED floodlights. It’s an approach that doesn’t require any extra wiring. The LED light and professional quality camera will both switch on when an intruder or visitor is detected.

Put your customers at ease Customers’ eyes are open to the possibilities of smart control, but they’re wary of the downfalls of inferior specification. After all, no-one wants the hassle that comes along with poor quality, inadequate specification, vague instructions, and lacklustre support.

So, it makes sense to look for trusted brands with guaranteed quality and expert control using a stable, proven App like the global leader ‘TuYa’. Whether it’s to save energy and save money, improve security, or simply for added peace of mind, let’s all benefit from being ‘smart’.

BROWSE TIMEGUARD’S RANGE OF SMART SOLUTIONS AT: WWW.RDR.LINK/EAI029

64 July/August 2022 PROFESSIONAL ELECTRICIAN

ADGRIDS_PE_ADGRIDS.PMM_May06 10/06/2022 15:58 Page 65

ADGRIDS_PE_ADGRIDS.PMM_May06 07/06/2022 16:59 Page 66

067_PE_JUL-AUG22_Layout 1 15/06/2022 16:47 Page 67

PRODUCTS & BUSINESS SOLUTIONS

Not only does poor cable management compromise the visual appearance of the work, it also creates safety issues.

Graeme Morley, Product Manager – Fastenings, Fixings and Tool Systems at HellermannTyton, explains the benefits of using the right tools for the job.

MANAGEMENT MATERIAL

M

asses of work goes into installing electrical systems and one of the most pivotal elements to the process is cable management.

Ensuring that cables remain secure, and are able to function effectively sounds straightforward, but in reality, cabling can be tough work.

Cable bundling Cable bundling is critical to the network performance and reflects on the quality of the entire installation. Many installers and engineers showcase their work with neatly bundled cables, and to do so, require a bundling tool that is customisable and reliable.

The AT2000 CPK Hybrid bundling tool from HellermannTyton offers automated and reliable cable bundling that is fully functional in both factory and remote environments. The inclusion of an optional 18V battery enables cordless bundling

and tying to happen virtually anywhere along the production line, even when a power supply isn’t readily available with 8000 ties per charge.

The AT2000 CPK Hybrid also provides a 20% speed increase on its predecessor, with a binding time between 0.65 and 1.0 seconds, making the bundling and tensioning of cables and tubing — from electrical cables to fluid delivery tubes — quicker than ever.

With the ability to bundle and tension up to 1.5 million cables before the blade needs replacing, the AT2000 CPK Hybrid offers repeatable and dependable performance.

Users are provided with automated, quality cable-tie applications with recurrent bundling suitable for a range of materials and components of any sensitivity level.

Cable tensioning Cable tension ensures that cables are correctly tensioned to protect, support and anchor objects; if the tension is too low, cables can easily break or recoil.

Whilst it can be difficult to achieve precise tension, this can improve quality and performance which makes proper tensioning a highly important aspect of any installation.

The EVO7i is HellermannTyton’s manual cable tie tensioning tool specially designed for industrial applications which require consistently reliable results, such

as automotive, rail, manufacturing, and life sciences. It builds on the success of its predecessor, the EVO7, with new features including a lock-out lever to prevent accidental changes to the tension setting and a two-shot comfort grip to reduce fatigue through prolonged use.

The EVO7i has a sleeker profile to enable it to pass through wires without catching, and an extended nose to easily tension and cut cable ties in confined spaces. This model is highly suited to applications where precision is paramount by removing the risk of damage by providing repeatable, calibrated precision.

Cable management solutions Some cable management solutions are more popular in certain industries than others, but the requirements stay the same.

Installers and electrical engineers require solutions that can offer precise and easily replicated results, time and time again.

HellermannTyton’s cable management tools provide these requirements to a large range of industries, ensuring the highest level of cable protection so that installers can conclude their installation with a safe and neat finish.

BROWSE THE HELLERMANNTYTON CABLE MANAGEMENT TOOL RANGE AT: WWW.RDR.LINK/EAI030

PROFESSIONAL ELECTRICIAN July/August 2022 67

068_PE_JUL-AUG22_Layout 1 15/06/2022 16:48 Page 68

PRODUCTS & BUSINESS SOLUTIONS

WEATHER THE STORM David Cleaver, Product Director at BG Electrical, outlines the latest improvements to the BG Storm outdoor socket range and the benefits to contractors and end-users alike.

W

eatherproof outdoor sockets provide a safe and convenient power solution to homes and businesses alike.

The BG Storm weatherproof range has been on the market for over ten years and has received many awards during this time. Following advances in manufacturing technology and feedback from installers, the product has undergone a recent upgrade, making it even easier to install and operate.

Continuing to improve Even if units may be selling well and proving popular, this doesn’t mean we shouldn’t seek to further enhance our products. BG Electrical understands this and takes

product development seriously, continually reviewing and updating its offer, to provide even better user experiences for the contractor and the end-user alike.

The updates to the range have been made as a direct result of contractor feedback and will be made available from this month onwards.

These improvements centre around ensuring the installation and usage is much simpler. This offers a win-win; the contractor benefits from a quick and straightforward installation and the end-user will see the results of a solution that offers improved usability, in any weather.

For installers, new fast-fix 150° screw-turn covers remove the need for loose screws and screw covers completely, ensuring a much faster and easier install.

Likewise, the new quick release front plate and quarter turn screws also removes the need for loose screws and screw covers, delivering the same benefits. Increased rigidity through internal strengthening walls of the rear box also prevents distortion when fitting to uneven surfaces.

Reduced risk of impact damage For end-users, the introduction of larger open-and-close paddles offers smoother and easier operation, particularly in wet or cold weather. This change is particularly beneficial to users with less manual dexterity and strength. These paddles are

68 July/August 2022 PROFESSIONAL ELECTRICIAN

also recessed, smooth and flush fit, greatly reducing the risk of damage from impact, whilst enhancing the aesthetic of the unit and delivering greater longevity.

In addition, patented cable entry prevents accidental opening of the cover as it keeps the lid safely closed, even if the connection cable is accidentally pulled.

Other improvements include the improved fit of internal IP rated seals over the fixing points, as well as additional sealant channels added to the fixing points. The side grid now has additional ribs on the covers, which aids opening and improves the rigidity of the cover.

Finally, BG Electrical branding has been added to the fascia to distinguish the Storm sockets from other unbranded products on the market. This ensures end-users can be confident that their purchase is from a reputable brand with decades of experience, backed up by a solid 25-year guarantee on electro-mechanical parts (10-year guarantee on Wi-Fi extenders and three-year guarantee on Smart).

This new, innovative Storm range from BG undoubtedly offers contractors a product that is easier-to-install and use, providing peace of mind for end-users.

BROWSE THE NEW BG STORM WEATHERPROOF RANGE AT: WWW.RDR.LINK/EAI031

ADGRIDS_PE_ADGRIDS.PMM_May06 09/06/2022 08:20 Page 69

070_PE_JUL-AUG22_Layout 1 15/06/2022 16:50 Page 70

Products IN PRACTICE

Easy evacuation thanks to C-TEC C-TEC’s new evacuation alert system, EVAC-ALERT, has been specified for a new purpose-built residential building in London.

Located in the Elephant & Castle area of the London Borough of Southwark, Joyce Newman House is an 8-storey block of 40 spacious living spaces commissioned by Leathermarket JMB, Southwark’s largest resident-managed housing organisation.

The affordable-housing development also features landscaped gardens, an interactive playground and a communal kitchen garden for residents to grow their own vegetables.

Specified and supplied by Churches Fire & Security working alongside Blu Electrical Installations, EVAC-ALERT has been specifically designed to comply with the new BS 8629, which recommends evacuation alert systems be installed in all new blocks of flats over 18 metres to assist

the Fire and Rescue Service (FRS) in evacuating part or all of a building in the event of an emergency.

The system consists of a 2-loop control panel connected to a host of single and multi-way interface units, self-testing sounders and visual indicators.

Quick alerts for occupants Simple and intuitive with manual controls to allow firefighters to easily operate the evacuation alert devices located inside flats on a zone-by-zone or floor-by-floor basis, the panel is stored in a secure vandal resistant cabinet which can only be accessed by the FRS using a special copy-protected key.

David Collins, Project Manager at Churches Fire & Security, said: “Evacuation alert systems ensure firefighters can alert occupants in a building of the need to evacuate if a fire

70 July/August 2022 PROFESSIONAL ELECTRICIAN

gets out of control. The EVAC-ALERT system we’ve specified provides peace of mind for residents and, crucially, also demonstrates that building management have taken every precaution possible to protect the people residing in the property. Our client has been delighted with the system.”

Certified to all relevant EN54 product standards, EVAC-ALERT is powered by C-TEC’s CAST protocol and fully compatible with ENVISION, its powerful new Cloud-based fire alarm remote access, service and site management software package which can be used to provide duty holders with a verifiable audit trail of system activity and device testing.

WATCH THE EVAC-ALERT PRODUCT DEMONSTRATION VIDEO AT: WWW.RDR.LINK/EAI032

070_PE_JUL-AUG22_Layout 1 15/06/2022 16:50 Page 71

sponsored by www.electricalcharity.org

Sevadis powers Space Park’s electric future Space Park Leicester, a global hub and collaborative community for businesses, researchers and academia for space and space-related technologies has gone electric with the support of Sevadis.

Opting for Sevadis’ Grandis Duo for its intelligent charging capabilities, as well as its aesthetic appeal, Space Park Leicester can now offer electric vehicle charging for 14 EV drivers, whether that be staff or visitors. Providing 7.4kW of charging speed

per charging socket, drivers can simply plug in and recharge whilst visiting the centre or completing their working day, ready for their electrified commute home.

Like all of Sevadis’ range of charging points, the Grandis Duo offers an OCPP compliant solution to businesses, enabling them to connect to any OCPP compliant back-office management system in the world.

Space Park Leicester opted for the

Sevadis Cloud smart back-office management system, allowing them to monitor chargepoint usage whilst having the ability to understand live and historical data. Opting for the Sevadis Cloud also ensures that drivers can recharge their vehicles using their smartphones, offering a simple, straightforward and seamless charging experience for all.

The application of dynamic load balancing provides Space Park Leicester with a future-proofed infrastructure solution, enabling drivers to charge their vehicles on restricted supplies. Dynamic load balancing plays a key role in Space Park Leicester’s charging infrastructure, particularly for the future when more staff and visitors will require charging on-site.

GET MORE DETAILS ON THE SEVADIS GRANDIS DUO CHARGING SOLUTION AT: WWW.RDR.LINK/EAI033

ADGRIDS_PE_ADGRIDS.PMM_May06 07/06/2022 17:29 Page 72

073_PE_JUL-AUG22_Layout 1 15/06/2022 16:55 Page 73

Products round up

CED ELECTRICAL Axiom Pop-Up Sockets w/ USB Charging Points Axiom’s vast range of extension leads and trailing sockets has been updated with 1 or 3 gang pop-up tower sockets, each with two USB charging points and supplied with 13A plugs for ease of operation. Further innovations come with a 10 gang free-standing tower extension unit with active neon surge protection, plus a 5 gang 13A remote control extension lead. These contemporary products join an array of more traditional options, with 1 to 8 gang individually switched trailing sockets leading the way, followed by 1 to 6 gang extension leads with cable lengths from 2 to 20 metres and options including standard, fused, switched and anti-surge protected products. The standard trailing socket range is equally expansive with 1 to 8 gang options, with or without neons.

GET MORE DETAILS AT: WWW.RDR.LINK/EAI034

MAKITA UK DHG181ZJ Heat Gun

PROTEUS SWITCHGEAR AFDD Brochure Proteus Switchgear has produced a useful Arc Fault Detection manual – Guidance on AFDDs for the Installer and Homeowner – which is available for download. The Proteus AFDD devices are single module and fit the busbar system of their existing consumer units and distribution boards to offer protection against overcurrent, short circuit, earth leakage and arc fault, all in one device. They’re available in B & C Curve variants, type A 30mA with double pole switching. As well as details on the Proteus AFDD range, the AFDD brochure also provides a ‘User Guide’ on what to do if your AFDD has tripped, helping to explain the different LED fault status indicators.

ACCESS AND DOWNLOAD THE AFDD BROCHURE AT: WWW.RDR.LINK/EAI035

Makita UK has introduced the DHG181ZJ Heat Gun to its LXT 18V range.

Designed with air volume and temperature adjustment functionality to reach up to 200L/min and 550°C, the new heat gun is ideal for a wide range of applications. The DHG181ZJ delivers an air temperature of up to 550°C and air volume of up to 200L/min, depending on the setting chosen. The air volume and temperature are both adjustable, so users can easily set the output to suit the job; simply flick a switch to change between the two air volume settings and adjust the air temperature with the dial. To protect the operator, the DHG181ZJ features an anti-restart function that prevents accidental start up. There is also a quick release, tool-less mechanism to allow for easy nozzle replacement without the need to touch any hot metal in the process. To keep professionals working disruption-free for longer, the DHG181ZJ offers impressive run times of 30 minutes in low mode and 21 minutes in high mode when using a fully charged 6Ah LXT battery, ensuring maximum user efficiency.

BROWSE THE PRODUCT DATA SHEET AT: WWW.RDR.LINK/EAI036

BG ELECTRICAL Evolve Wiring Accessories Designed with a slim and screwless profile, the new Evolve range complements any modern interior with a sleek, stylish and minimalist appearance. Evolve is available in traditional and contemporary stocked finishes, including pearlescent white, brushed steel, matt black, matt grey, dark blue, black chrome, satin brass and copper, with a wide range of extended finishes also available. The range offers a complete portfolio of decorative wiring accessories, suitable for all domestic or commercial applications, including 30W Type C fast charge USBs, WiFi extenders, new touch and push dimmers and wide rocker switches.

BROWSE THE FULL RANGE AT: WWW.RDR.LINK/EAI037

PROFESSIONAL ELECTRICIAN July/August 2022 73

073_PE_JUL-AUG22_Layout 1 15/06/2022 16:55 Page 74

Products round up

SCOLMORE Wiring Accessories Catalogue

WISKA BraceFITTING The demands placed on cable protection products are justifiably high. Along with protection against external conditions such as temperature, dirt and impact, handling must remain simple and convenient. WISKA’s Brace system meets these demands with conduits and fittings – metallic and non-metallic. The Brace system protects against mechanical movement, vibration, water, electromagnetic radiation, hot and cold temperatures and acids, alkali and sand.

A key part of the system, the WISKA BraceFITTING is a unique product that many engineers have been waiting for: a sophisticated closure system and IP68 as standard are just two of the benefits that installers will love. The product is available in three variations.

WATCH A PRODUCT DEMO VIDEO AT: WWW.RDR.LINK/EAI038

Scolmore has launched its biggest and most comprehensive wiring accessories catalogue to date. Containing nearly 25% more content than the previous version, Issue 13 brings together all products in the extensive Click range, including the latest major new product addition – the Elucian by Click Consumer Units range – into one, easy to access reference guide.

Available to download from the Scolmore website, the new 704-page catalogue provides wholesalers, contractors and specifiers with a valuable, in-depth resource to help them locate the right products and solutions for a variety of projects. The catalogue is rich in product and technical information and features every product from each range that Click covers, incorporating all the latest additions that have been developed to meet the growing demand in the marketplace.

BROWSE AND DOWNLOAD THE CATALOGUE AT: WWW.RDR.LINK/EAI039

AICO AudioLINK+ The second iteration of Aico’s AudioLINK technology makes it easy to access real-time data from alarms via the free AudioLINK+ App. AudioLINK+ extracts the same data as AudioLINK, but does this quicker and quieter than before to reduce disturbance. With the average time to make a report taking between 4-7 seconds, AudioLINK+ technology makes getting real-time data from Smoke and Carbon Monoxide alarms more efficient – saving time and money. The App generates a simple to read colour-coded report giving information on a range of alarm data including; alarm activations, sensor status, alarm testing information, battery and back up cell status, recorded Carbon Monoxide (CO) levels within CO alarms, and advice on dust contamination levels within the 3000 series alarms. The AudioLINK+ App is backwards compatible, meaning AudioLINK alarms currently installed do not need to be replaced to utilise the new technology and will work with the new version of the App. However, users will need to update to the latest version of the App to download reports from any AudioLINK+ alarms installed within their properties.

GET MORE PRODUCT DETAILS AT: WWW.RDR.LINK/EAI040

LEGRAND Intermod Under-desk Range Legrand UK & Ireland has bolstered its Intersoc range with the launch of Intermod, providing offices with a completely flexible under-desk power solution.

Intermod is an extension to the Electrak offering and provides a range of power sockets and USB chargers as well as other outlets, including data. The modular system can be built to customers’ individual requirements and used with other products within the Intersoc range to extend the capabilities. Factory-assembled in the UK, Intermod uses Legrand’s extensive range of Arteor modules, which offers almost limitless combinations. Intermod is ideal for buildings that have shared spaces, hot-desking or a clean desk policy. To support installers, Intermod and Intersoc are completely compatible and share the same connections and components, including the busbar system and end connectors. As such, they can be electrically and mechanically connected in the same way, making it ideal for retrofitting to existing Intersoc installations.

BROWSE THE INTERMOD UNDER-DESK RANGE AT: WWW.RDR.LINK/EAI041

74 July/August 2022 PROFESSIONAL ELECTRICIAN

073_PE_JUL-AUG22_Layout 1 15/06/2022 16:56 Page 75

KNIPEX Automatic Crimping Pliers for Wire Ferrules KNIPEX has taken crimping to the next level with its Automatic Crimping Pliers for Wire Ferrules.

With enormous capacity, these self-adjusting pliers are suitable for single wire ferrules up to 16 mm² and twin wire ferrules up to 2 x 10 mm². The innovative pliers have been designed for electrical contractors and engineers who crimp wires to save time, money and effort.

They provide an automatic self-adjustment to wire ferrules with a ratcheting mechanism that ensures a complete crimping cycle for consistent, reliable and fast crimping. A hexagonal shaped crimp layout provides a near round form and is particularly suitable for confined connections.

Ergonomically designed and with a comfortable handle, the pliers provide a smooth operation and are lightweight too, meaning they can be used for volume crimping applications comfortably.

BROWSE THE FULL RANGE AT: WWW.RDR.LINK/EAI042

M2 ELECTRICAL RCD Protected Socket Outlets Three new RCD protected socket outlets are now available in the M2 Electrical range of wiring accessories.

All three are 13A 2-gang Type A passive (do not need to be re-set following power outage) and incorporate double pole switches. The white moulded stylish flush fitting socket is designed to retrofit any standard 2-gang socket in installations where perhaps no RCD devices exist.

When supplied in the weatherproof M2 Easy Seal enclosure the unit provides IP66 ingress protection and is ideal to offer more local protection on potentially hazardous equipment outdoors. Finally, there is the surface mount 2-gang socket with a durable steel face plate and box for use in garages and workshops.

BROWSE THE RANGE AT: WWW.RDR.LINK/EAI043

073_PE_JUL-AUG22_Layout 1 15/06/2022 16:56 Page 76

Products round up

FuseBox range offers flexible, versatile circuit protection The FuseBox circuit protection range of metal consumer units and protection devices offers flexible, versatile solutions for electrical installations.

The range comprises of 6, 10, 14, 18, 22, 28 and 36 module enclosures in single and double bank variations, with or without T2 surge protection fitted. These include: Main switch incomer, Dual tariff, RCD incomer, Dual RCD, Garage units and EV charger units.

The FuseBox T2 surge protection consumer units provide protection against transient over voltages and the secondary effects of lightning strikes with a Type 1 SPD coming soon to compliment the range.

Design features include: l l l l l l l l l l l l

T2 surge protection Earth and neutral terminal bars at the top Removable and raised DIN rail Round knock-outs on all faces Extra height for RCBOs 1mm electro-galvanised steel (zinc) RAL 9001 powder coated finish Tail clamp (ACCF) Circuit identification labels Captive screws on front cover IP20XC BS EN61439-3

BROWSE THE FULL FUSEBOX CIRCUIT PROTECTION CATALOGUE AT: WWW.RDR.LINK/EAI044

76 July/August 2022 PROFESSIONAL ELECTRICIAN

073_PE_JUL-AUG22_Layout 1 15/06/2022 16:56 Page 77

Take a breaker with Kempston Controls MEM range Kempston Controls is pleased to announce a classic British brand has returned to UK ownership with the acquisition of MEM. The deal, completed on 1st December 2021 includes Eaton’s MEM Memshield 1 & 2 products. The aim is to continue MEM’s history of innovation by developing, manufacturing, and selling these dependable product ranges for years to come.

Richard Regan, Group Managing Director of Kempston Controls, said: “This is a great acquisition for Kempston Controls and we’re very excited to continue the development of MEM as a leading UK manufacturer.

“With the pressures on raw material costs, transport and responsibilities to reduce our carbon footprint, there has never been a better time to upcycle the large number of installed Memshield 2 boards using the MR30 RCBO POD.” Your local wholesaler has direct access to Memshield 1 & 2 products. Memshield 1 is made to order with a range of Memshield 2 products available for next day delivery. This quality range of electrical circuit breaking products is also proudly Made in Britain.

With the support of Kempston Controls’ technical departments and sales teams, MEM will continue to innovate, manufacture, and sell products for many years to come, catering to the needs of an ever-growing industrial and commercial marketplace that demands quality products.

BROWSE THE FULL MEM CLASSIC RANGE AT: WWW.RDR.LINK/EAI045

073_PE_JUL-AUG22_Layout 1 15/06/2022 16:57 Page 78

Products round up

Class, comfort and control with new C.K updates C.K Tools is continuing its promise to produce high quality tools that meet the most demanding needs of trade professionals, with new offerings and updates across its crimpers and wire strippers.

The hand tool specialist’s new Pass-Through Modular Crimper 8P (T3853), Automatic Wire Stripper Pro (T3943) and improved two-component handle across both products and their accompanying ranges, will ensure every trade professional has the highest-class product for the job, with improved comfort and control.

The all-new Pass-Through Modular Crimper 8P (T3853) The biggest headache when working with 8P Modular Plugs? Getting extremely thin wires cut to the correct lengths and inserted in the correct sequence to ensure no missed connections at the point of crimping – and a poorly designed crimper never helps the situation.

Not only do C.K Tools’ new crimpers include a deadlock system and high compression for easy, safe and precise crimping of 8P Pass Through Modular Plugs, they also cut, strip and trim wires, making them the perfect multi-tool for the job.

The crimpers have been produced with precision engineered dies and made from carbon alloy steel for strength and durability – combine that with 40,000 test cycles and you’ve got a quality crimper you can trust to deliver safe connections every time.

Moreover, they also come with a new, unique two-component handle which is more comfortable to use and enables you to apply more efficient pressure without the fear of hand strain.

And that two-component handle now also features across C.K Tools’ entire crimper range thanks to the multiple benefits the new design provides.

78 July/August 2022 PROFESSIONAL ELECTRICIAN

The updated Automatic Wire Stripper Pro (T3943) With extended stripping capacity and automatic adjustments from 0.05 - 8mm², the Automatic Wire Stripper Pro now also features C.K Tools’ new two-component handle for fatigue-free wire stripping.

The handles are also shatterproof so can withstand the toughest of working environments. New hardened and fully replaceable stainless-steel blades ensure reliability and efficiency, enabling long-term use of the stripper.

FIND YOUR NEAREST C.K TOOLS STOCKIST BY VISITING: WWW.RDR.LINK/EAI046

076_PE_OCT21_Layout 1 02/09/2021 21:31 Page 104

GET MORE DETAILS ABOUT C-TEC’S PRODUCTS AT: WWW.RDR.LINK/EAI047

080_PE_JUL-AUG22_Layout 1 15/06/2022 17:00 Page 80

CAUGHT ON

C A M E R A SOCIAL SNAPS!

BUILD ELECTRICS: What a lovely surprise this find behind a socket was!

AUSTIN COSTELLO: Plumbers creating their own supply from the live terminals of an isolated switchgear!

MB ELECTRICS: I found this while I had my hand under the floorboards!

LUCY CALVERT: This was originally given a couple of C3s!

GOLEC ELECTRICAL: We came across this in a boiler room recently. All heating controls were contained inside.

RICK ROLFE: This was a repair to a damaged ring circuit carried out by a well-known brand name’s contractor.

80 July/August 2022 PROFESSIONAL ELECTRICIAN

080_PE_JUL-AUG22_Layout 1 15/06/2022 17:01 Page 81

FISH ELECTRICAL: I was asked to add a socket in this garden pod that had recently been installed. This is what we found when we took the existing socket off… Worse still, the supply plug on the pod was connected with reversed polarity

WILL: We found this on a strip out before a re-wire. Who needs grommets eh?

ASHLEC SERVICES: Mmmmm, that looks like a tasty twin and earth! The rodents have been busy above this kitchen. This was found during the first fix on a kitchen refurb.

LC FISHER ELECTRICAL: We were just finishing off a job in a kitchen, and while outside having a cuppa I looked up and saw this…

And one to proud of from AC Electrical This is one of our recently completed Hager distribution boards.

OLIVER FENTON: On a recent job I pulled a light fitting down to find this mess… It had worked perfectly for years!

Get your regular fix of CAUGHT ON CAMERA! PE’s website includes weekly Caught on Camera ‘Exclusives’, featuring the best (and worst) of the shocking snaps that readers have posted to our Twitter, Facebook and Instagram pages. Don’t forget to tag us in on your posts, or DM us your pictures and caption directly and you may just see your pictures featured on these pages or our website.

PROFESSIONAL ELECTRICIAN July/August 2022 81

082 PE JULY_AUGUST 2022 INDEX_Layout 1 14/06/2022 15:36 Page 82

ADVERTISER INDEX Here is a useful summary of all the adverts that appear in this issue of Professional Electrician.

Each is listed with its page number and a direct URL that will get you straight to the relevant online information.

BG Electrical Ltd ..........................................................Inside Back Cover

Metrel UK Ltd .................................................................................Page 40

www.rdr.link/EAI100

www.rdr.link/EAI122

Carlisle Brass Ltd ...........................................................................Page 72

NICEIC ...............................................................................................Page 59

www.rdr.link/EAI101

www.rdr.link/EAI123

Carl Kammerling International Ltd ..........................................Page 65

Niglon Ltd ..................................................................................Pages 10, 11

www.rdr.link/EAI102

www.rdr.link/EAI124

CHAUVIN ARNOUX UK Ltd .......................................................Page 45

NVC Lighting ....................................................................................Page 31

www.rdr.link/EAI103

www.rdr.link/EAI125

Chint Europe (UK) Ltd ..................................................................Page 34

Olson Electronics Ltd ...................................................................Page 38

www.rdr.link/EAI104

www.rdr.link/EAI126

C-TEC Ltd .........................................................................................Page 62

Orcomm Ltd ..............................................................Outside Back Cover

www.rdr.link/EAI105

www.rdr.link/EAI127

Cudis Ltd ..........................................................................................Page 62

Ovia Lighting ...................................................................................Page 59

www.rdr.link/EAI106

www.rdr.link/EAI128

DANLERS Ltd ...................................................................................Page 77

Prefect Controls Ltd ......................................................................Page 77

www.rdr.link/EAI107

www.rdr.link/EAI129

DETA Electrical Company Ltd ....................................................Page 13

professional-electrician.com ......................................................Page 75

www.rdr.link/EAI108

www.rdr.link/EAI130

Di-LOG Test Equipment ...............................................................Page 43

Robert Bosch Ltd ............................................................................Page 14

www.rdr.link/EAI109

www.rdr.link/EAI131

Electrium Sales Ltd ........................................................................Page 37

Schneider Electric ......................................................Inside Front Cover

www.rdr.link/EAI110

www.rdr.link/EAI132

Electrorad U.K. Ltd ..........................................................................Page 9

Scolmore International Ltd .........................................................Page 69

www.rdr.link/EAI111

www.rdr.link/EAI133

ELEX ...................................................................................................Page 56

Selectric ............................................................................................Page 36

www.rdr.link/EAI112

www.rdr.link/EAI134

Elite Security Products Ltd .........................................................Page 66

Sevadis ...............................................................................................Page 61

www.rdr.link/EAI113

www.rdr.link/EAI135

FireAngel Safety Technology Ltd ..............................................Page 17

Tesco Mobile Ltd ............................................................................Page 21

www.rdr.link/EAI114

www.rdr.link/EAI136

Forum Lighting Solutions ..............................................................Page 4

Test Instrument Solutions Ltd ...................................................Page 47

www.rdr.link/EAI115

www.rdr.link/EAI137

FuseBox ............................................................................................Page 27

The Institution of Engineering and Technology (IET) ....... Page 65

www.rdr.link/EAI116

www.rdr.link/EAI138

Kempston Controls ........................................................................Page 71

UNICRIMP Ltd .................................................................................Page 72

www.rdr.link/EAI117

www.rdr.link/EAI139

LED Group ........................................................................................Page 24

WAGO Ltd ........................................................................................Page 69

www.rdr.link/EAI118

www.rdr.link/EAI140

Luceco plc ..........................................................................................Page 6

Wise Controls ..................................................................................Page 77

www.rdr.link/EAI119

www.rdr.link/EAI141

Makita (UK) Ltd ..............................................................................Page 66

Zzeus Training Ltd ........................................................................Page 28

www.rdr.link/EAI120

www.rdr.link/EAI142

Megger Ltd ......................................................................................Page 53 www.rdr.link/EAI121

PE Page Grid_Layout 1 14/06/2022 16:24 Page 1

PE Page Grid_Layout 1 10/01/2022 09:46 Page 1