Professional Builder September 2020

001_PB_SEPT20_Layout 1 04/08/2020 12:27 Page 1

FRE E TO THE TRA DE

Professional BUILDING ■ FLOORING ■ PLUMBING ■ ROOFING ■ CARPENTRY ■ PAINTING AND DECORATING ■ THE BUSINESS MAGAZINE FOR THE BUILDING INDUSTRY

SEPTEMBER 2020

ROOFING, FLOORING & INSULATION WE’RE BACK ON THE ‘PITCH’

E COVID-19 UPDAT ECOVERY – THE ROAD TO R

BRICKS, BLOCKS & PAVING UP THE GARDEN PATH IT’S A CLEAN SLATE AFTER LOCKDOWN FOR BACK-TO-WORK BUILDERS

PB page grid_Layout 1 31/07/2020 10:48 Page 1

003_PB_SEPT20_Layout 1 04/08/2020 12:28 Page 1

contents

Total Average Net Distribution 113,695 1 July 2018 – 31 June 2019

SEPTEMBER 2020 VOL. 42 NO.7 MANAGING EDITOR TERRY SMITH EMAIL: tsmith@hamerville.co.uk

Professional Builder, Regal House, Regal Way, Watford, Herts, WD24 4YF. pb@hamerville.co.uk

DEPUTY EDITOR LEE JONES EMAIL: ljones@hamerville.co.uk GROUP ADVERTISEMENT MANAGER CRAIG JOWSEY TEL: 07900 248102 EMAIL: craig@hamerville.co.uk NORTHERN ADVERTISEMENT MANAGER IAN DUFF MOBILE: 07810 353525 EMAIL: ian@hamerville.co.uk REGIONAL ADVERTISEMENT MANAGER SAM SHANNON TINSLEY MOBILE: 07554 013302 EMAIL: stinsley@hamerville.co.uk GRAPHIC DESIGNER DONNA BOOTH GROUP PRODUCTION MANAGER CAROL PADGETT PRODUCTION ASSISTANT CLAIRE SWENDELL DIGITAL MANAGER JASMINE SMITH EMAIL: jsmith@hamerville.co.uk DISTRIBUTION MANAGER KARL CLARK PUBLISHER BRYAN SHANNON PRINTED BY WALSTEAD PETERBOROUGH PUBLISHED BY HAMERVILLE MEDIA GROUP Regal House, Regal Way, Watford, Herts WD24 4YF Tel: (01923) 237799 Fax: (01923) 246901 Email: pb@hamerville.co.uk

www.youtube.com/protrademags

REGULARS 7 8 10 31 36 81 82

@PB_mag

@probuildermag

@probuilderonline

BUSINESS SOLUTIONS 28 Amaiz – Banking & Bookkeeping App

Editor’s Viewpoint News Letters Training & Upskilling Free-for-All The Doctor’s Advice Wise Howell

61

SPECIAL REPORTS 12 The Building Industry Recovery 15 Readers’ Lives – Boxer, Kieran Gething 18 Inventors’ Corner – Profiler+ 20 Polypipe – Made Great in Britain 22 Fighting Tool Theft Together 25 Changing Streams – Plastic Pollution Campaign

BRICKS & BLOCKS 56 Ibstock – Product Selector 59 Aggregate Industries – Cement 61 H+H – Aircrete 62 Bradstone – Porcelain Paving 64 NEW PRODUCTS

GENERAL BUILDING

52

65 NEW PRODUCTS 66 Geocel – Works Range 68 Magply – Building Board

TOOLS & WORKWEAR

Professional Builder is a business magazine for firms and individuals involved in all aspects of the building industry. It is available nationally – free to the trade through leading builders’ merchant outlets. © 2020 To be removed from this magazine’s circulation, please call 01923 237799 or email circulation@hamerville.co.uk.

Subscriptions to Professional Builder are available at the following rates: UK: 1 year (11 issues) – £30.00 post paid Europe & Overseas: 1 year (11 issues) – £50.00 post paid Airmail: 1 year (11 issues) – £65.00 post paid

70 NEW PRODUCTS 72 Festool ROOFING, FLOORING & INSULATION – New Product Launches 38 Bond It – 74 Mirka – Dual Seal It Liquid Membrane Voltage LEROS 41 Klober Breathable Membranes 76 Timberland Pro 44 NARM Rooflight Advice – Tibby’s Review 46 Permaroof – EPDM 49 Marley – SolarTile BUILDERS’ VEHICLES 52 Stormking 78 Honest John – Flat Roofing Systems 79 Ssangyong – Rhino Pick Up 54 NEW PRODUCTS

76

I

PROFESSIONAL BUILDER SEPTEMBER 2020 3

NEW PB TF MAG AD_Layout 1 31/07/2020 11:48 Page 2

R FO SS K E C N I BA US B

THE TRADESHOW BUILT FOR THE TRADE PROFESSIONAL BUILDER

TOOLFAIR 2020

POWER TOOLS

•

HAND TOOLS

•

BUILDING EQUIPMENT

All the latest tools, live demos, show specials – all under one roof!

NEXT SHOW Ricoh Arena, Coventry Thursday 26th & Friday 27th November 2020 SAFELY DOES IT An extensive risk assessment programme has been carried out to ensure Toolfair is a safe and well-ordered environment for all visitors and exhibitors. Enhanced measures include: l Non Touch Entry l Hand Sanitising Stations l Contactless Payments

l Visitor Flow Management l Trained Operations Teams l Regular Thorough Cleaning

Register for free at www.toolfair.info

PB page grid_Layout 1 10/06/2020 10:49 Page 1

PB page grid_Layout 1 31/07/2020 10:05 Page 1

007_PB_SEPT20_009_PB_FEB04 04/08/2020 12:28 Page 7

viewpoint No news is good news!

By now, it’s pretty obvious to everyone as to which Unquestionably, the Government has got a lot wrong professions are emerging from this devastating global these past five months, and an independent review when it pandemic with their reputations massively enhanced through comes will not make for pretty reading, although, of course, their day-to-day activities. Unfortunately – and it naturally more great headlines. It’s also true, however, that the various pains us to say this being so close to home – journalism is opposition parties – who have not exactly covered most definitely not one of them. Whilst we fully appreciate themselves in glory either – would have undeniably struggled that, with thousands of people dying of the virus at its peak, to cope with the biggest peace time crisis any UK our high streets reduced to ghost towns and workers being Government has ever faced. Yet, if a big stick presents itself, laid off in their droves, good news is pretty thin on the you can be certain that it will be wielded by every Tom, Dick ground…. but it doesn’t mean there isn’t any out there at all if and Harriet to further their own often politically motivated you are prepared to dig a little deeper. agendas. In such a depressing climate is it any wonder that Much easier, though, for the rabid newshounds to so many people are still too scared to leave their homes and constantly inform us that the country is well and truly going to return to some semblance of normality in the workplace? As the dogs. By consistently barking up the same old tree of USA president Franklin D Roosevelt famously quoted in 1933, negativity they have shown themselves to be not only as the world emerged from the Great Depression; “the only intrinsically biased but, in many cases, downright lazy in the thing we have to fear is fear itself” and yet nothing we read extreme. We may have spent or hear on a daily basis makes us goodness knows how long in remotely optimistic about the future. hermetically sealed bubbles, but do The trade media, of which we we really need to be force fed the “The very hint of some positive have been an intrinsic part of for bleeding obvious every hour of the more than forty years, has not been news in these troubled times day that the economy is crashing, and immune to this sort of rampantly inevitably brings the now millions will be forced to seek negative news speak either. Back in employment benefits with little the depths of the 2008 recession you obligatory negative response prospect of ever returning to positions couldn’t turn the pages of journal from our media channels…. and careers they once held dear? after journal without learning of yet Life, in just about every respect, has another factory closure, job losses ‘Yes, of course, that’s all very changed beyond our wildest and insolvencies within the greater well but what about...!’” imaginations, but how can it be any construction industry sector. As we other way when the Government is commented at the time, it really forced to hand out money we don’t doesn’t need us to tell you when have like confetti, millions are on furlough, and our once blue things are bad, you are experiencing it at the sharp end every chip companies are sitting idle. Yet still the harbingers of working day on site. What you need more than ever are doom persist in quoting the latest all-time record low car positive ideas to get back on your feet and that is what we sales figures, or off the scale public borrowing, and gross will strive to deliver. national output, as though it will all come as some terrible Of course, we were never naive enough to believe that we shock to the great British public. We have lost count of the had the answers to everything… try this or that and all will be number of people who have told us that they simply just don’t fine. What we did suggest was that there were opportunities tune into the news channels anymore, which is a particularly to widen your skill base, perhaps look to specialisation in a worrying indictment of how far these once vital public particular trade, which would prove more profitable than information bastions have fallen in recent times. being a Jack of all trades, and see how product And now, having emerged from the darkest days of developments and innovations could lead you in a different lockdown, the latest preoccupation is with the threat of a direction with new skill sets. And, of course, listen to the dreaded second wave. Based, it has to be said, on horribly advice and tips of people who had been there and survived confusing and conflicting scientific evidence, the potential for a previous turbulent times. That, we concurred, was the role of further 120,000 Covid-19 deaths is nevertheless a headline a leading trade magazine then, and the message now from us grabber which may just help to sell a few more copies. The is surely even more succinct. Over the coming months we insatiable demand for 24-hour round the clock news needs will, therefore, be even more determined to bring you the sort sating and those in charge clearly neither have the time or of features and ideas which will hopefully make a difference inclination to offer up carefully researched and balanced reports going into 2021. The prophets of doom and gloom have to provide a more positive standpoint. never come as news to us…. and never will!

I

PROFESSIONAL BUILDER SEPTEMBER 2020 7

008_PB_SEPT20_011_PB_MAR04 04/08/2020 12:29 Page 8

News Professional Builder

email your news to us at pb@hamerville.co.uk Tel 01923 237799

RETRO STYLE

© Highwaystarz/Adobe Stock

aiming ‘hire’

More need to be done to map out a ‘retrofit road map’ post lockdown, according to Trustmark

The industry has come together to announce new measure to retain and encourage apprentices

“We welcome the Chancellor’s support for homeowners to carry out insulation and other retrofit measures around their homes,” declares Simon Ayers, CEO of TrustMark, the government endorsed quality scheme. “The only way to have a realistic chance of meeting the Government’s carbon neutral 2050 deadline is to improve the energy efficiency of the homes we already have, so this investment from the government is an important step in achieving that goal and starting the development of a long-term plan to retrofit a high percentage of the UK’s homes “The focus on green recovery and creating jobs, apprenticeships and momentum through other tax related areas is also good news for the construction industry, particularly small to medium sized house building and trades businesses.

The Construction Leadership Council’s Talent Retention Scheme will match thousands of displaced workers with construction employers in need of their skills. The Construction Industry Training Board (CITB) has pledged it will actively support the delivery of the initiative and work closely with impacted apprentices to ensure they have the best opportunity of being retained and completing their training.

“However, more needs to be done to provide innovative new green finance options, as well as the development of a retrofit roadmap for the industry to follow, so we are working to the same goal and delivering quality work that consumers can trust.”

You can read our full guide to the Government’s measure to support the industry on PAGE 12.

FOR FURTHER INFORMATION VISIT: WWW.RDR.LINK/BS001

renovation nation

Online trade directory Checkatrade.com experiences a surge of home renovation searches and its busiest single week ever There has been a huge 134 per cent increase in searches for services since there was a let-up in lockdown measures, plus an increase of 68 per cent in comparison to the same period last year, with the online trade directory seeing its busiest week in its entire history in June.

Topping the trade list for Brits are landscapers (+214 per cent in comparison to the same time last year) and fencing/gates (+202 per cent), whilst bricklayers (+264 per cent) and painter/decorators (+247 per cent) have equally been much in demand on the site. Checkatrade research during lockdown also found that 58 per cent of DIY-ers admitted to suffering DIY disasters, with dodgy DIY costing the UK an average £206 per person, equating to a huge £10.8 billion lost nationally.

FOR FURTHER INFORMATION VISIT: WWW.RDR.LINK/BS003

I

8 SEPTEMBER 2020 PROFESSIONAL BUILDER

FOR FURTHER INFORMATION VISIT: WWW.RDR.LINK/BS002

distance learning

Employers must continue to manage the Covid-19 risk to workers says British Safety Council The British Safety Council is reminding employers that they still have a duty of care to their staff. The government has published new guidance on how businesses can reduce the risk by taking © New Africa/Adobe Stock certain steps to protect workers. These include avoiding face-to-face seating, reducing the number of people inside, improving ventilation, changing shift patterns and increasing face coverings. “Covid-19 has obviously not gone away,” comments the chief executive of the British Safety Council, “and it is still recommended that people keep two metres apart where they can.”

FOR THE LATEST SITE OPERATING PROCEDURES FROM THE CLC VISIT WWW.RDR.LINK/BS004

008_PB_SEPT20_011_PB_MAR04 04/08/2020 12:29 Page 9

© Mix and Match Studio/Adobe Stock

payback time

Research reveals surge in late payment Many businesses in the UK are both getting paid – and paying – later, with the Covid-19 pandemic causing a surge in late payments. According to the latest independent research from Close Brothers Asset Finance, three in five UK SMEs have experienced delays in receiving payments, while a significant number of business owners have admitted to being forced into delaying paying invoices.

“Firms have long struggled with late payments in the UK and the pandemic has seemingly made things worse,” said Neil Davies, CEO, Close Brothers Asset Finance and Leasing. “Our research echoes that of the Federation of Small Businesses, who found 62 per cent of SMEs have been subject to late or frozen payments.” Indeed, research reveals that the problem has been getting progressively worse since 2016, hindering innovation and causing investment decisions to be delayed.

IF YOU WOULD LIKE TO KNOW MORE VISIT WWW.RDR.LINK/BS005

don’t be the fall guy

The No Falls Foundation is urging workers to ‘Be Safe, Don’t Fall, Stay Alive!’

Dedicated to preventing falls from height and helping people affected by the life-changing consequences of a fall, the charity is keen to ensure that height safety remains a priority, despite the understandable pressures to kick-start the economy.

“Falls from height are the single biggest cause of workplace deaths and one of the main causes of major injuries,” explains chair of the trustees, Peter Bennett OBE. “It is, therefore, imperative that safety is not compromised for the sake of productivity. We have witnessed unprecedented collaboration and mobilisation of all the stakeholders in industry to fundamentally change behaviours to try and ensure that Image supplied by the Covid-19 does not wreak devastation in the workplace. Moving forward, Ladder Association we need to harness and build upon that collaboration and sense of common cause, and apply it to that commonplace, often unnoticed danger – working at height.”

IF YOU WOULD LIKE TO KNOW MORE VISIT WWW.RDR.LINK/BS006

HOME RUN

Investment in housebuilding is a boost for the industry according to Ben Dyer, CEO of Powered Now The government has announced a further £900m for more than 300 “shovel-ready” projects in England in an effort to energise the construction of new homes. As part of the package £360m will also be allocated towards delivering 26,000 new homes on brownfield sites. It follows in the wake of Boris Johnson’s vision for a £12 billion affordable homes programme – providing up to 180,000 new homes over eight years. “Housebuilding took a real hit during the pandemic,” declares Ben Dyer, CEO of Powered Now. “However, with larger demand than available properties, we are hearing that delayed projects are finally coming back. This is good news for the industry as the housing market helps employ thousands of sub-contractors from many different trades.”

IF YOU WOULD LIKE TO KNOW MORE VISIT WWW.RDR.LINK/BS007

fire alarm

Three quarters of fire doors failed inspections More than three quarters (76 per cent) of the fire doors inspected by the Fire Door Inspection Scheme (FDIS) in 2019 were condemned as not fit for purpose. In addition, 63 per cent of the buildings inspected also had additional fire safety issues. The data, which refers to more than 100,000 inspections in over 2,700 buildings across the UK, also highlighted the challenges with fire door installation. 30 per cent of fire doors nationwide were condemned due to poor installation, with problems including excessive gaps around the door and the use of noncompatible foam.

Louise Halton, Scheme Manager of FDIS said: “The correct specification, installation and ongoing maintenance of a fire door can really mean the difference between life or death for occupants, so it’s vital that fire doors are regularly inspected and maintained so as to save lives.”

FOR MORE INFORMATION AND TO DOWNLOAD THE FDIS DATA INFOGRAPHIC VISIT WWW.RDR.LINK/BS008

I

PROFESSIONAL BUILDER SEPTEMBER 2020 9

010_PB_SEPT20_Layout 1 04/08/2020 12:30 Page 10

YOUR LETTERS... ...problems solved @PB_mag

@probuildermag

www.facebook.com/probuilderonline

www.probuildermag.co.uk

Professional Builder, Regal House, Regal Way, Watford, Herts, WD24 4YF. Through our extensive manufacturer network, Professional Builder has access to some of the best technical brains in the industry. If we don’t know the answer to a building-related problem ourselves, we almost certainly know someone who does.

If something is troubling you, or if you have any other comments on the world of building, let’s hear it.

WALKING THE PLANK

EMERGENCY SERVICES Dear Professional Builder

We were lucky over the lockdown in that we managed work through. It wasn’t easy, because deliveries of materials have been disrupted and, before the restrictions were eased a little, there were only certain jobs – where the client was not present – where we could realistically keep going. What has occurred to me is just how integral to society the trades really are, and it is the same in almost every national emergency.

All the flooding earlier this year seems like a lifetime away now, but it was the trades who were repairing the damage. It does seem a shame to me that building as an industry, or a profession, doesn’t have a higher status, because you’d be hard pressed to think of many that are more important. ● Graham Ahern, Brighton, Sussex PB: It is certainly true that the pandemic has forced us all to reassess what is integral to our society – especially when it comes to the concept of a key worker. In these difficult times it is important to remember that we all play a part. Construction is always critical to any recovery and the Covid-19 crisis will be no different – take a look at PAGE 12 of this issue to see what help is available.

BANKRUPT SYSTEM Dear Professional Builder

I read with interest your feature on the builder from Kent who’d been knocked for tens of thousands of pounds. It’s an experience that almost every builder can identify with, and often the directors of these companies can set up another firm just a few weeks or months later, whilst there still owing thousands to their subbies. We also seem to be hearing more and more about customers who are trying to get the final bill reduced by being difficult about extras or the quality of the work, and again that’s certainly something to which we can testify as a company. Small builders are the backbone of the industry and it would be good see the government protect us from this kind of behaviour. ● Paul Trantham, Skegness PB: We regularly hear stories of ‘cowboy customers’ who are trying to get something for nothing, and it is a feature of the building industry that is not publicised anywhere near enough.

I

10 SEPTEMBER 2020 PROFESSIONAL BUILDER

Dear Professional Builder

I was on a job in Hertfordshire earlier this year and saw this rather creative wooden scaffolding on the property opposite which wouldn’t have looked out of place in a third world country. It does make you wonder how these people ever escape the attention of the all seeing HSE inspectors when they are down on the rest of us like a tonne of bricks. As we all know, there are still some out there getting work from undercutting reputable builders who would be doing a decent job for a fair price. ● Anon, Herts PB: Don’t forget if you see any on-site horror stories share them with us – our DI-WHY? feature is exposing some of the worst examples. Take a look at the latest entries at WWW.RDR.LINK/BS009

MATERIAL WORLD Dear Professional Builder I was called into a job the other day where the homeowner had decided to have a go at skim coating the walls of a downstairs nursery. The finish would have been pretty ropey anyway without the more series issue of not using PVA first, so the plaster had dried out, cracked and was falling off the walls in places. The lady of the house was not impressed with his handiwork. It occurred to me that there must be thousands of jobs like this up and down the country, where people have taken on jobs during lockdown that would be better left to the professional. I’ve even heard that it’s contributed to some of the materials shortages we’ve been experiencing. ● Keith Underhill, Lyme Regis, Dorset PB: All that time spent at home, will no doubt leave property owners pondering how they can make improvements. Whether it’s a home office, space for the kids or full extension or loft conversion, it will be all good work for builders.

PB page grid_Layout 1 31/07/2020 10:07 Page 1

012_PB_SEPT20_Layout 1 04/08/2020 12:31 Page 12

SPECIAL REPORT THE RECOVERY

CONFIDENCE BUILDING © markim/Adobe Stock

In recent weeks the government has announced a number of new economic stimulus measures aimed at the construction sector. Professional Builder’s Lee Jones examines the implications for tradespeople.

© Andy Dean/Adobe Stock

here there is crisis there is also opportunity, and whilst the Covid-19 pandemic has thrust a unique set of challenges upon us, it is has equally shifted mindsets.

Whether it’s a home office, more room in the nest for those temporarily grounded fledglings, or a garden in which to cultivate that new found affinity with nature, thoughts have naturally turned to improvements to the domestic spaces to which we have all been confined. As a result, many of the lead generation sites are reporting a surge in enquiries, and builders stand poised to deliver on those dream properties.

In these straightened times, of course, support will be required, and when Boris Johnson declared that it was time to “build, build, build” it was a welcome recognition of the vital role the industry will play in any recovery. Since then a range of measures have been introduced

W

12

I

which promise to lay the foundations for a solid upturn in industry fortunes.

With the Green Deal now occupying a dusty area of a Whitehall cupboard marked ‘past policy failures’, organisations like the Federation of Master Builders have been calling for a new ‘National Retrofit Strategy’ for some time. It is a course of action that would improve the energy efficiency of our existing housing stock, provide a significant work stream for tradespeople, and help our legislators meet carbon emissions targets. Given that we are already committed to achieving EPC Band C for all homes by 2035, and net zero by 2050, just such an initiative actually represents an imperative.

Green Homes Grant

Whilst recent government announcements have fallen short of quite that all-encompassing programme, £2 billion has been allocated for improvements in the likes of insulation

SEPTEMBER 2020 PROFESSIONAL BUILDER

and other energy saving measures. The introduction of a one-year, Green Homes Grant is part of an avowed aim to ‘build back greener’ and will typically see homeowners receive grant-funded vouchers of up to £5,000. Some of the details have yet to be finalised but it is envisaged that they will be able to ask for quotes from accredited installers before applying for the grant, with the poorest households potentially receiving up to £10,000 in funds.

The addition of the likes of cavity and loft insulation into a property remains the most cost-effective means of improving the performance of a building, and is a job well within the competence of any general builder, whilst other trades, such as window fitters, could also benefit.

Moreover, a further £1billion has been set aside to make the same advances in public buildings, together with the installation of renewable and low carbon heating solutions, such as heat pumps, in social housing.

It is perhaps in planning where potentially more far-reaching and controversial proposals are afoot. In the early weeks of the pandemic Whitehall moved quickly to ensure that permissions that would otherwise have lapsed as a result of lockdown will now be extended.

Consequently, consented sites with an expiry date between 23 March 2020 and 31 December 2020 will now see their consent extended to 1 April 2021.

012_PB_SEPT20_Layout 1 04/08/2020 12:31 Page 13

© Robert Kneschke/Adobe Stock

Unused Properties

town and city centres, the amount of space that could fall within the scope of these new rules is potentially vast.

Housing targets are a political numbers game but it is increasingly being acknowledged that the government cannot meet its targets for completions without a significant contribution from small and medium enterprise (SME) developers. An added benefit of encouraging these companies is that, when compared to the larger players in the sector, they are more driven by market forces to focus squarely on quality rather than quantity. Here again, the government has allocated up to £400 © artursfoto/Adobe Stock

In addition, from September, unused properties can now be demolished and repurposed without full planning applications. With many of our high streets looking increasingly obsolete, and a huge growth in online shopping accelerating their demise, retail units can now be more readily converted to residential, whilst many office buildings can benefit communities with a similar change in use.

What exactly constitutes an ‘unused building’ is yet to be defined, whilst industry leaders have also cautioned that deregulation should not unleash a culture of compromise on standards. Given what we have already experienced in new build, for instance, where a recent report from the CPRE found that the design of a significant percentage of new developments was so poor that they should never have been approved in the first place, it is clear that these planning policies need to be properly policed.

Similarly, concerns have been voiced over office to residential conversions already undertaken via existing permitted development rights effectively creating the problem housing of the future.

It is, however, a welcome recognition that urban regeneration will not only relive the pressure on greenfield land but also generate much needed work for the local jobbing builder. With derelict buildings an all too visible blight on our

million to a Home Building Fund, and Brownfield Land Fund, that will help small developers access finance. It could, in fact, be argued that with an anticipated drop in land prices, demand having outstripped supply for many years previous, and a temporary Stamp Duty holiday further accelerating sales, now is a very good time to embark upon a new build project.

In the wake of every downturn the building industry has been integral to the recovery, and whilst the coronavirus and lockdown might be unprecedented, its aftermath will follow that familiar path.

There will undoubtedly be change but much will remain the same – we are still desperately short of new homes, with the only viable solution to build more, whilst the economics of improving rather than moving remain strong. We now need tradespeople more than ever.

FOR FURTHER INFORMATION ON THE GREEN HOMES GRANT VISIT WWW.RDR.LINK/BS010 FOR FURTHER INFORMATION ON THE HOME BUILDING FUND VISIT WWW.RDR.LINK/BS011

I

PROFESSIONAL BUILDER SEPTEMBER 2020 13

PB page grid_Layout 1 04/06/2020 09:10 Page 1

015_PB_SEPT20_Layout 1 04/08/2020 12:32 Page 15

SPECIAL REPORT READERS’ LIVES

BOXING CLEVER Professional Builder’s Lee Jones hears some fighting talk from builder and boxer, Kieran Gething.

or most builders a day’s graft on site would be more than enough exertion, but one south Wales tradesman spent his formative years combining just that with a gruelling physical training regime. That hard work has, however, been richly rewarded with considerable success in the ring, and today Kieran Gething is forging a successful career as a professional boxer, whilst still maintaining his Abergavennybased general building company, G Gething & Sons.

“There have been four or five generations of fighters in my family,” explains the Welsh Area super-lightweight champion, “a timescale which stretches back as far as there’s been Queensbury

F

rules. At the same time, I’ve also taken on my father’s building firm, so they were both natural paths for me to follow. I actually started at the age of twelve and would subsequently clock up 65 fights as an amateur. I’ve boxed in tournaments right across Europe, against some of the most formidable opponents on the circuit, and captained the Wales national team for two years, a period when we beat our English counterparts twice, which were very proud moments for me. In fact, the first time I captained my country was the day after my father’s funeral, which was a hugely emotional experience and one that will live with me forever.”

In the Welsh system even the most accomplished amateurs can struggle for

funding, which meant that Kieran had to balance his love of boxing with a full-time job. A punishing schedule would begin with a 5am rise, followed by a day on the tools, before transferring straight to the gym. “Most nights I wasn’t getting home until eight in the evening, and there are undoubtedly sacrifices that have to be made, but boxing does have a lot to teach you about discipline and hard work, as well as the sheer thrill of climbing into the ring.”

Having won titles at junior, youth and senior levels, including the Welsh national championship, the 26-year-old pugilist would turn pro. Since then he’s collected the corresponding title as a professional, as well as a Welsh Fighter of the Year award, with his most recent bout televised live on Sky Sports. Continues Kieran: “When the sport is your main occupation, because you’re not fighting as often, it’s easier to strike a better balance, but there’s still not huge amounts of money.

There are all kinds of things that people probably don’t realise you have to pay for, from medical and licensing fees to sparring partners and travelling – all of which adds up.

“Through contacts in the construction

I

PROFESSIONAL BUILDER SEPTEMBER 2020 15

015_PB_SEPT20_Layout 1 04/08/2020 12:32 Page 16

SPECIAL REPORT READERS’ LIVES

“Kieran is currently training for his next fight, where he’ll meet Irish national champion, Gary Cully at the LS-Live in Wakefield.” industry I’ve been able to pursue sponsorship opportunities, and recently signed a deal with Ebbw Vale-based firm, Philip Jones Timber Products, who will be supporting my career financially. That does take the pressure off in the build up to a bout because you can focus on your training camp and the fight.”

Director of the south Wales timber supplier, Danielle Jones, is full of praise for Kieran’s work ethic: “We are proud to be supporting Kieran in his boxing career. We know how hard he trains whilst successfully running his business and being a family man. Seeing how committed he is made us, as a family

business, proud to be part of his team. We wish him the best of luck for upcoming events and are behind him 100 per cent!”

Whilst Kieran’s professional career has gone from strength to strength, his construction company continues to punch about its weight. “We have three full time employees, as well as a group of trusted sub-contractors, and we’re thriving as a business. As a director I’m able to oversee the projects we have in progress, whilst it will also give me something to fall back on when I finish.”

Whilst elite sport has been severely disrupted by the coronavirus, Kieran is currently ramping up his training ready for his next fight, where he’ll meet Irish national champion, Gary Cully at the LSLive in Wakefield. It is a fight that will be broadcast live in the US on ESPN+ and worldwide on IFL TV. IF YOU OR YOUR BUSINESS ARE INTERESTED IN SPONSORING KIERAN, THEN CONTACT GETHING123@HOTMAIL.CO.UK

A RAY OF SUNSHINE

O

ne of the few bright spots for retailers during lockdown has been a surge in book sales, with people looking for the sort of escapism and adventure denied to them as the pandemic curtailed normal day-to-day living. So it was all rather timely when Ray Saunders contacted us to enquire whether we would be interested in reviewing a copy of his new novel, HOW LUCKY CAN YOU GET, a true story of achievement over adversity. And, at ninety two years of age, having grown up in what were still darkly impoverished Dickensian surroundings in Kent in the 1930s, working on the railway during the Blitz, numerous amusing scrapes with authority, and subsequently huge professional and personal relationship success along the way, Ray has more

I

than most to recount during its own unique period of British social history.

We will excuse him a slight initial exaggeration to us of his many building related exploits. In truth there are really only limited passing references to his prowess on a variety of building related projects in the fifties, but the story of his life, and the grasping of every opportunity that came his way, including a period as an illegal bookmaker, body builder champion and running a successful stud farm to name but a few is both poignant and ultimately inspiring. A rich and full life, one lived without the risk adverse restraints and political correctness which will clearly jar with many of today’s generation, yet in many ways, given the present climate, and his approach to life’s adversity’s, Ray is still a man of our times.

He is, indeed, a very lucky individual.

16 SEPTEMBER 2020 PROFESSIONAL BUILDER

HOW LUCKY CAN YOU GET IS PRICED AT £11.99.FOR FURTHER INFORMATION VISIT

WWW.RDR.LINK/BS012

PB page grid_Layout 1 31/07/2020 10:10 Page 1

018_PB_SEPT20_Layout 1 04/08/2020 12:32 Page 18

Professional INVENTORS’ CORNER

HIGh PROFILE

Professional Builder’s Lee Jones talks to a carpenter who’s made his mark with a new scribing tool. Gary Nicholls reveals the Profiler+® story.

he business of building is nothing if not a daily exercise in problem solving, and when an answer is not to hand then the trades are adept at fashioning their own. Most of the time these bespoke toolbox additions remain the exclusive preserve of their creator, but occasionally a determined individual will have the drive to develop the idea for the industry at large – and one such is certainly Gary Nicholls and his Profiler+®.

The Surrey-based tradesman was already well-versed in the need for the right tools for the job, operating a successful bespoke kitchen and bedroom installation business with his cabinetmaking father from the mid ‘90s. “We provided a design, manufacture and install service on a whole range of custom-made cabinetry,” explains the 50year-old inventor, “and it was when working on the family firm that the idea for the Profiler+® first began to evolve.”

“We were fitting a kitchen into a rather rustic rural property, where all of the internal walls featured exposed stone.

When it came to installing the infill panel between the tall oven unit and the wall, we ended up spending a good couple of hours trying to mirror the shape of the wall onto the material in order to then cut

T

I

it. It’s something that no doubt many tradespeople can identify with when on this kind of project, and it was then that I thought there must be a better way.”

Improvising

At that stage Gary’s only concern was to fashion a makeshift device that could help out on that particular job, and that very evening he improvised with the cardboard from a Cadbury’s chocolate box to do just that. With all his previous experience of scribing, however, it didn’t take long to realise that a rather more refined version would attract much wider appeal.

“This was before the age of the internet, so it took some time to research what was already out there, but a tool with the kind of functionality that I envisaged just didn’t seem to exist, and even today many

18 SEPTEMBER 2020 PROFESSIONAL BUILDER

trades will still be resorting to a block of wood and a pencil, or a drawing compass.” That theme of improvisation was reflected in Gary’s own early prototypes, graduating first from cardboard, to a block of wood with an old Scalextric wheel attached, before a cousin contributed by creating a working model in metal.

“When I had something that looked more professional, and was able to present the idea to the patent office, that was the point at which I realised there was actually a commercially viable product here. Of course, since then the Profiler+® has been repeatedly improved, and I probably went

018_PB_SEPT20_Layout 1 04/08/2020 12:33 Page 19

through at least ten versions until we settled on the definitive edition.”

Like many fledgling inventors, Gary quickly discovered that the process of patenting and finding a manufacturer was far more onerous than he could have envisaged. It’s been a long journey, but his scribing tool has been finding favour with the trades since its launch in 2015 – but just how does it work?

“The guiding principle of the Profiler+® is simplicity, not only for the end user, but also so it could be manufactured by injection moulding cost-effectively. There were certain criteria it had to satisfy, such as adjusting to different sizes of pencil (2 – 12mm), and when running the tool down a wall it was important that it didn’t damage a painted or wall-papered surface. The design needed to be compact, durable and easy to grip, with smooth action wheels that could

effortlessly glide over long lengths.

Accuracy is always king for a carpenter, and a precision tip that could cope with complex profiles was also a must. A drawing compass means you can create perfect circles, whilst a moveable pencil holder gives you the ability of setting the exact distance you’re looking for.”

Gary’s first ever prototype solved a particular problem on an infill panel, but there are a multitude of applications, whether that’s on worktops, plinths, gables, or wood and laminate flooring. If

you’re tiling and paving then the Profiler+® will be your friend, whilst it will equally find a place in increasingly popular van conversions.

“When you have no experience of manufacturing it’s quite daunting to try and project manage that process,” Gary concludes, “and that’s without considering the like of distribution and marketing.

Watching it grow, and the feedback I get from end users, is the reward. That’s what kept me going – the positive reactions I get from anyone who’s used the tool.”

For further information on the Profiler+® visit www.rdr.link/BS013

020_PB_SEPT20_Layout 1 04/08/2020 12:33 Page 20

Made Great in he famous old Doncaster racecourse has seen more than its fair share of risky bets over the years, but none can surely match the massive gamble taken in the town back in 1980. That was the year when former apprentice plumber, Kevin Mcdonald got together with engineer, Geoff Harrison to establish a plastic piping company to take on the odds-on favourites of the era.

Today, as the business celebrates its fortieth anniversary, it employs more than 3,000 workers, has 18 sites throughout the UK and Europe, and has a diverse range of plumbing, heating, drainage and ventilation systems for use in residential, commercial, civils and infrastructure sectors. And, at 87, the good news is that Kevin is still around to take more than a passing interest in the latest product developments.

It’s hard to imagine just how much water has quite literally passed under

T

ALWAYS AT THE RACES!

Professional Builder heads to Doncaster where the going is still very good for one of the plumbing industry’s overwhelming favourites.

this particular bridge since a fifteen year old Kevin left school shortly after the conclusion of the Second World War to begin a building trades course at his local college. After obtaining a City & Guilds qualification, and doing National Service, he later returned to the classroom as a teacher, supplementing his income with a part time sales role for OSMA plastic drainage systems.

I

20 SEPTEMBER 2020 PROFESSIONAL BUILDER

Eventually he would turn these roles on their head to concentrate on a love for all things plastic, which still exists more than seventy years later.

Some of our more mature readers may recall the Bartol Plastic Company, which Kevin set up in the early sixties, as one of the first to specialise in domestic plastic plumbing fittings. In 1966 he sold the business to Hepworth ceramics, joining the board and running the plastics division until 1972, when the entrepreneurial spirit resurfaced and he left to start another business, Macdee Plastic Baths.

Unfortunately, a desperate economic slump in the mid-seventies undermined the company’s progress, and by 1980 he was ready for a new challenge. It came following discussions with an engineer,

020_PB_SEPT20_Layout 1 04/08/2020 12:35 Page 21

Britain tions Making its name at key building exhibi

of the period.

Geoff Harrison and Brian Leesing, a systems expert, and the decision to get back into plastic piping with a view to seriously disrupting the market with significant price reductions. To this end, and with encouragement from Doncaster Council, a new factory was constructed, and the first fittings were soon rolling off the production line in their millions. So much so that in just five years a flotation valued the company at £150 million, and the man whose ambitions once simply extended to becoming a jobbing plumber with his own firm was now a multi-millionaire.

Production today primarily centres around sites in and around Doncaster, and as far apart as Glasgow and Caerphilly, where consistent innovation and sustained investment in the latest machinery has seen the business

dominate the plumbing market, with more than 20,000 product lines available. One of the biggest breakthroughs in this respect was the establishing of Polyplumb in 1996. At the heart of this highly flexible and durable complete plumbing system is a commitment to polybutane pipes. Suitable for domestic hot and cold water systems, predominantly in a traditional grey colour, it is firmly established as the number one choice amongst the trades.

As well as ready-to-use, straight out of the coil pipes, four different push and press fit non-demountable ranges are offered in 10, 15, 22, and 28mm, which require no specialist soldering skills and help reduce metal theft on site. Hand demountable fittings are also available in white, whilst the range is further complemented with the innovative Surestop stopcock range, helping to prevent water leakage with the flick of a switch. As you would expect, environmental and recycling issues are always at the top of the company’s progressive agenda.

UFH Improvements

In recent years the company has also extended its warm water underfloor heating system with a complete product solution for every conceivable floor type or residential heating project from ceramic stone tiles to wood, engineered wood and carpet.

No less impressive in terms of annual output is the below ground product portfolio, which services the market with a prodigious amount of sewer pipes.

Inspection chambers, soil and waste pipes, and associated fittings and accessories, make it, according to the company, the UK’s largest range of domestic drainage products for the contractors and developers, whilst the civils side is at the forefront of larger construction projects and tackling the important issues of the day, such as property flooding and pollution of waterways.

The past forty years have seen a succession of acquisitions, mergers and management buy-outs, which in recent times have added some well known brands to the Polypipe portfolio, including Silavent, Domus and Nuaire, and given its history you would assume that there are certainly more in the pipeline.

Today, Kevin is still in regular touch with the business, ready to add his considerable experience to key decisions surrounding new product developments and business ventures, which will keep the company firmly in the winners’ enclosure.

Continuing massive investment in new manufacturing facilties keep the company a nose in front of the competition.

For more information on Polypipe visit www.rdr.link/BS014

I

PROFESSIONAL BUILDER SEPTEMBER 2020 21

022_PB_SEPT20_Layout 1 04/08/2020 12:37 Page 22

Professional @PB_mag

www.facebook.com/probuilderonline

FIGHTING

Campaign

TOOL THEFT

TOGETHER

LOCK & LEARN

ool theft is a huge problem in the UK, with the Federation of Master Builders revealing the shocking reality that more than three quarters of UK builders have had their tools stolen in the past. The impact of these tool thefts is also pushing up the value of insurance claims, with the cost of claims for the theft of tools from vans increasing by 55 per cent in just the past year according to specialist insurance provider ECIC. Whilst tool theft is very common, there are a number of simple steps that you can take to keep your tools secure.

T

Lock up securely

It is advice we’ve given many times but the best thing you can do to prevent theft from your van is to remove tools when you aren’t using them, storing them inside a garage, outbuilding or your home, and securing them with ground or wall anchors and locking points. Linking power tools together with security defender cables and securing ladders with a chain makes it harder for a thief to take your tools.

To further tighten up the security of your van or outbuilding, use a heavy duty padlock to guard against common theft tactics, and look for padlocks that are made from high-strength and long-lasting materials, such as Yale’s new range of

Yale offers some top tips on protecting your tools from theft padlocks, that will withstand corrosion and elemental wear and tear. In addition, you can also look to use smaller padlocks to secure any toolboxes or bags, providing an additional layer of protection for your property.

Utilise additional security systems Whether you’re storing your tools in your home, garage or outbuilding, one of the best deterrents that you can use is an alarm. According to a survey from Which?3, burglar alarms were the number one thing that would put off a potential thief, along with the considerable deterrent of a dog on the property.

Ensure that the your home alarm is in good working order, and consider securing any outbuildings where tools are stored with an alarm system, such as the Yale Shed & Garage Alarm, that is designed to secure outbuildings.

Alternatively, you can invest in smart security solutions that provide you with

peace of mind even when you’re away from home, such as the Sync Smart Home Alarm system, which can cover your outbuildings at a range of up to 200m and will send alerts directly to your smart phone at any time, even whilst you’re away from home.

In addition to alarms, you can also consider fitting a CCTV system, as a network of visible CCTV cameras will help to create an enhanced deterrent when combined with an alarm. For this purpose, you could look to fit a system such as the HD1080 Smart CCTV Camera System, which provides a live-streamed video feed straight to your smartphone.

If you’re looking for a smaller system that will just keep an eye on your van or your tools inside an outbuilding or garage, then you could consider fitting the All-InOne Outdoor Camera, which features motion-detection, a spotlight and alarm, a two-way microphone and live feed streaming straight to your smart phone.

These smart systems will provide an extra layer of security to your property and provide you with the peace of mind that your tools and your home are protected, even when you aren’t around to keep an eye on them.

TO FIND OUT MORE ABOUT YALE’S RANGE OF SECURITY SOLUTIONS VISIT WWW.RDR.LINK/BS015

Together, we can do our bit to fight tool theft!

I

22 SEPTEMBER 2020 PROFESSIONAL BUILDER

PB page grid_Layout 1 31/07/2020 10:18 Page 1

PB page grid_Layout 1 31/07/2020 10:20 Page 1

025_PB_SEPT20_Layout 1 04/08/2020 12:37 Page 25

SPECIAL REPORT SUSTAINABILITY

Chan ing Neal Maxwell is campaigning to highlight the problem of plastic pollution in the building industry.

Professional Builder’s Lee Jones finds out more. ith our sights set firmly on containing the coronavirus, environmental concerns have been somewhat sidetracked of late, but in an uncertain future one thing we can be sure of is that they will swiftly return to the top of the agenda.

Thanks to some shocking scenes on the BBC’s Blue Planet, plastic pollution has achieved special prominence in the public imagination, but one owner of a Merseyside-based refurbishment, fit out and construction company had his own very personal epiphany.

“On my 60th birthday we decided on a once in a lifetime trip to the Arctic,” explains the Chairman of north westbased, Aztec. “Whilst I never expected to return with anything other than good memories, it would prove to be life changing. We were based on a specialist ship adapted for the Polar regions, from where I had the opportunity to sea kayak around the icebergs and glaciers, and come face to face with some

treams

W

extraordinary wildlife. It was a magical experience, but from what we saw firsthand, and what the scientists who were our guides were telling us, we were confronted by the realities of climate change and pollution.”

This pristine and unadulterated paradise has a problem – and that problem is people. Walrus, who will consume 3,000 – 5,000 clams in one feeding session, are at the same time ingesting significant amounts of plastic, whilst polar bears are

left stranded without food by the relentless retreat of ice floes. Appalled by what he’d seen, on his return to the UK Neal was determined to do what he could to raise the issue of plastic pollution, and a conversation with Professor Jonathan Sharples at Liverpool University would give him the necessary direction.

“Myself, Jonathan, Brendon Kenny and Dr Gareth Abrahams from the university’s School of Environmental Science have since set up Changing Streams, a not-forprofit organisation that is dedicated to eradicating the use of plastic. Given that the construction sector is the second largest producer of plastic waste, and it’s the industry I’ve spent much of my life in, our focus will initially be on the built environment, but we have ambitions to take the message much further.”

In fact, the avowed aim of the project is to eradicate plastic from the building industry within two decades. Neal explains how the Changing Streams focus differs from other environmental campaigns. “When we talk about sustainability a lot of space is devoted to

I

PROFESSIONAL BUILDER SEPTEMBER 2020 25

025_PB_SEPT20_Layout 1 04/08/2020 12:38 Page 26

SPECIAL REPORT SUSTAINABILITY

CO2 emissions, and our carbon footprint, but not a lot is talked about the materials used. Given that there are still microbeads in some paint formulations, for example, it’s not always obvious what is actually in the products construction consumes, so we’re looking into a labelling system so that the solutions that are using alternatives to plastics can be easily identified.”

Changing Streams will work collaboratively with the industry and manufacturers to lead the way in developing innovative, new products and materials that reduce plastic content further. In partnership with the University of Liverpool, we are researching just how the makers of products, and their end users, can tackle what we have characterised as the new asbestos. We have plans to build a prototype house made without plastic, for instance, all of which is part of a process of education.

There are relatively easy wins, as well, like the amount of unnecessary

packaging that bricks are delivered to site in, or where alternatives already exist.”

In addition, the Changing Streams Charter will guarantee that its signatories are committed to a reduction in the use of plastic, and will include not only building firms but manufacturers, whilst the organisation is equally dedicated to lobbying government for legislative support.

“I know from experience that contractors are more willing to change when it’s their customers that are demanding it, and winning a job might be on the line if they don’t, so we want to highlight this problem

to everyone in the supply chain, and every size of organisation.”

Changing streams is also looking to attract members, host events, and workshops. Those members will take an active role in shaping the direction of the campaign, and Neal is adamant that sole traders and the owners of the very smallest companies can get involved.

“The construction industry is a conflict business but what we want to introduce is collaboration,” he concludes, “and to do that we need expertise and experience from every level of the industry. We want small builders to engage with us and would encourage them to do so.”

FOR FURTHER INFORMATION ON CHANGING STREAMS VISIT: WWW.RDR.LINK/BR016

You can also subscribe to the Changing Streams newsletter or email directly to admin@changingstreams.org.

PB page grid_Layout 1 31/07/2020 10:21 Page 1

028_PB_SEPT20_Layout 1 04/08/2020 12:39 Page 28

BUSINESS SOLUTIONS: BANKING AND BOOKKEEPING

PREPARE TO AMAIZ A new banking app from Amaiz has ambitions to unburden sole traders and small businesses from the weight of admin.

Professional Builder’s Lee Jones investigates. very builder will bear the scars of doing battle with a paper monster of receipts, payments and invoices. For tradespeople, time is a very precious commodity and far too much of it is consumed by finance and accounting. Inevitably, of course, the incumbrance of additional jobs at the end of what is already a busy day will result in mistakes, and a survey from the banking app Amaiz has found that these are actually costing significant amounts of money. Indeed, its research reveals that over 34 per cent of micro businesses had even forgotten to invoice a client.

Launched in March of 2020, Amaiz brings bookkeeping and banking together for the benefit of builders and offers a whole suite of services besides. “It’s a banking app that does a lot more than banking,” declares Matt Goddard, Head of Acquisitions at Amaiz. “When we talked to the self-employed before we launched we found that one in five were working at least another day on accounting and we want to make sure that they are using that time to do the things that make them money.”

Available via a smartphone or desktop, ease of use has been one of the app’s

E

28

I

“Amaiz brings bookkeeping and banking together for the benefit of builders and offers a whole suite of services for the trades beside that” guiding principles. Downloading and registering takes a matter of minutes – with no credit check – and only a form of ID and right to work in the UK required.

Once set up, builders can take advantage of a host of financial tools and accountancy services, as Matt explains.

“The app is supplied with a pre-paid Mastercard with which builders can purchase materials. Receipts are then captured and categorised automatically,

SEPTEMBER 2020 PROFESSIONAL BUILDER

whilst it’s equally possible to take a picture of a proof of purchase on your smartphone and file it accordingly. As a result, paperwork is digitally stored, and a large chunk of your bookkeeping duties are automated.”

As with any business account there are full notifications of payments from clients, but there is also the ability to invoice from the app whilst still with the customer. Not only that, but we are, of course, moving inexorably towards a cashless society. It would be fair to say that the building industry has been slower in the adoption of the necessary technologies, but the impact of Covid-19 will serve to accelerate that change, with contactless payments inevitably demanded of many more businesses.

028_PB_SEPT20_Layout 1 04/08/2020 12:39 Page 29

“We found that a lot of smaller traders are not taking card payments because they fear that the cost might be prohibitive,” continues Matt. “With our mobile card reader, there’s only a small transaction fee of 1.69 per cent, together with a nominal set up cost (from £19.99), and builders are then ready to take contactless payment from clients there and then. It prevents late payment issues, the money goes straight into the tradesman’s account, and the transaction is automatically recorded in their company’s accounts.”

By utilising the desktop version of the app, all that captured financial data can be integrated into accountancy software or downloaded as a CSV file. In another lockdown friendly feature, in order to check the figures, an accountant can even be provided with limited and secure access to the Amaiz account, eliminating the need for a face-to-face meeting.

Moreover, if you need accountancy support, Amaiz’s own in-house professionals are on hand to help.

“Our expert accountancy team are fundamental to what we do,” enthuses Matt. “They provide full live support 24/7, whilst it’s also possible to ask simple questions through the app. When tax deadlines come up – or during the kind of crisis we’re seeing today – and there is pressure on HMRC phone lines, tradespeople will find that advice a very useful resource.”

If it’s peace of mind that users are looking for then take comfort that all of your information is protected by the very latest in voice biometric verification, a system which is recognised as the most reliable in proving someone’s identity.

Not only that but it’s popular with customers because they don’t need to remember passwords.

The developers of the Amaiz app are confident that its service is the silent partner that can release the skilled builder to undertake more site work. “We want businesses to take back control of their payments,” concludes Matt, “and help them increase their productivity in the process.”

FOR FURTHER INFORMATION ON THE AMAIZ BANKING APP VISIT WWW.RDR.LINK/BS017

PB page grid_Layout 1 31/07/2020 10:23 Page 1

031_PB_SEPT20_Layout 1 04/08/2020 12:39 Page 31

SPECIAL REPORT TRAINING & UPSKILLING

SET IN TRAIN

BUILDING BLOCKS... to a brighter future

In part two of our focus on web-based and virtual training, we look at what’s available for plumbers and heating engineers

in association with

PARTNERS IN WALL BUILDING

Worcester Bosch on Facebook

Vaillant Digital Learning

The Worcester Bosch Training Academy has established a Facebook training hub for installers. It means they can now access relevant content whenever suits them, from wherever they are. In-depth information on key areas of training with end of unit assessments and quizzes, live streaming, and the ability to ask the manufacturer’s training team any burning questions, are all functions users can enjoy. The Worcester Bosch Training Academy Facebook Group will also provide its members with an updated timetable of upcoming Skype training sessions for the forthcoming weeks, including the ability to share feedback on sessions and the chance to submit requests for future training topics.

Installers and contractors can now sign up for free, online training courses on some of the industry’s hottest topics, including the decarbonisation of heat in buildings, hydrogen, and other green gases. The company has also added to its online learning portfolio with the addition of its popular Business Support Clinics. The 2020 clinics include a new team of experts all on hand to offer free advice on issues affecting the trade in a series of hour-long interactive webinars. Following a successful roll-out, the business plans to increase the frequency of online sessions and cover a wider range of subjects, including courses on how to install, maintain and commission its product ranges like the ecoTEC exclusive.

WWW.RDR.LINK/BS019

WWW.RDR.LINK/BS020

DOWNLOAD THE H+H BROCHURE APP AT: WWW.RDR.LINK/BS018

Become a Fernox Genius

A one-stop source for industry information and how-and-when to use the Fernox product range, is how the manufacturer describes its interactive online course.

The 20-minute module covers why water treatment is necessary, the importance of cleaning the central heating system and why inhibiting is crucial to maintain central heating system health and efficiency.

Each section is designed to expand your knowledge of central heating system maintenance and ensure that you can effectively advise – and sell to – your customers. The Fernox products covered within the training include: Protector F1, Protector+ Filter Fluid; Boiler Noise Silencer F2; Cleaner F3; Leak Sealer F4 and the TF1 filter range. Helpful videos explain the role of the Fernox products and explore the science behind them and how they work.

WWW.RDR.LINK/BS021

I

PROFESSIONAL BUILDER SEPTEMBER 2020 31

031_PB_SEPT20_Layout 1 04/08/2020 12:39 Page 32

SPECIAL REPORT TRAINING & UPSKILLING

WWHRS Online Technical Presentation All you need to know about Waste Water Heat Recovery for Showers is available through a new online technical presentation. It is described as an ideal tool for learning more from home during these uncertain times for both new build and retrofitting. With waste water heat recovery also named in both options of the consultation for updating Part L in 2020 it is a perfect point to ensure you know how WWHRS can benefit your project.

The presentation content has been developed to provide all project sectors and types with relevant information.

Building upon a base of core content which will introduce all the key things you need to know about WWHRS, the presentation is built on an interactive platform allowing you to choose your own learning journey and focus upon what is important for your individual needs.

In addition to this, Recoup also has a full suite of online learning resources available. Their online learning site, recouplearning.co.uk, offers bite-sized learning modules and installation guides.

They can also offer individuals or teams a full online CPD presentation, or a more tailored overview presentation designed

to suit your requirements.

If you are working on a project, and want to include WWHRS... then send your floorplans to them and they will help support your design process by highlighting the best WWHRS options for you, whether new build or retrofit.

WWW.RDR.LINK/BS022

PB page grid_Layout 1 31/07/2020 10:27 Page 1

PB page grid_Layout 1 31/07/2020 10:33 Page 1

035_PB_SEPT20_Layout 1 04/08/2020 12:40 Page 35

advertisement feature

WHY ARE POCKET DOORS BECOMING SO POPULAR?

Over the last 10 years or so Pocket Doors have become a common occurrence in new builds, extensions and renovations but Pocket Doors are not a new idea, they have been around for a long time so why this popularity now? he first modern Pocket Door system used in the construction industry was patented in the U.S.A. in the 1950’s. It was made up of wooden stud and a track with runners inserted into a wooden header. This became reasonably popular over the pond and indeed trickled into the UK in the 70’s and 80’s but without much success. This was down to the fact that it was very basic and needed to be finished on site, which meant more materials etc. The time this took was definitely a negative for the use of Pocket Doors but so was the fact that, being made out of wood, the risk of warping was ever present, and a warped pocket means a bad sliding action.

Then, about 20 years ago, along came the full steel pocket version which originated in Europe. This was a complete steel system that didn’t warp and came with everything supplied to be used with standard 4” or 5” walls. It also came with a specific finishing jamb lining kit, so the end result was a good looking, reliable pocket door that met the builders needs

T

for a quick install with no more trips back to the merchants for other materials.

Nowadays you have a great choice of Pocket Door systems, the older wooden versions are still around and quite cheap but more and more they are losing ground to the full steel pocket systems.

An important component in this change has been the Rocket Pocket System, a steel pocket that has been designed for its simplicity of installation but has kept the cost down to the level of the old wooden versions, meaning you no longer have to give up the advantages of full steel pockets because of cost. At £119.50 list price, the Rocket Pocket is indeed a bargain. It comes complete with an integral braking system and fits UK standard size doors so you can choose the door of your choice and it fits first time every time.

You are not short of accessories with Rocket, a soft close mechanism is available, as is a self-closing system, and for that finishing touch Rocket can now supply a simple jamb kit that means a professional finish with minimum effort.

Flush pulls or bathroom locks are currently supplied FOC with each frame ordered.

So the question is WHY?

Why would you use a wooden pocket door system when the Rocket Pocket is available on a next working day delivery at a great price?

I

PROFESSIONAL BUILDER SEPTEMBER 2020 35

036_PB_SEPT20_Layout 1 04/08/2020 12:40 Page 36

Professional

BUILDER’S

We give our verdict on new products in our unique site tests, but now we want to give you the chance to try them – AND KEEP THEM – for yourself! All you have to do to enter the free draws is simply just type in www.rdr.link followed by the unique code.

!

L L A R O F E E FR 1

MOBILE PHONE

CAT S42 TOUGH SMARTPHONE The Cat S42 is a tough smartphone designed for reliability, even in extreme situations. This workhorse offers market-leading rugged credentials, a long battery life and a large bright display that can be easily read in sunlight. Like all Cat phones it can be regularly and thoroughly cleaned by being submerged and scrubbed with hot soapy water or disinfectant, an essential hygiene detail for those who must keep on working.

It’s the smart move to get involved in our ‘Free-for-All’ when we’ve got great prizes like this CAT S42 phone up for grabs.

Make use of our digital reader enquiry service by entering the link below into your browser to enter.

8

WORKING ON SITE BUNDLES

PERMAROOF FIRESTONE RUBBERCOVER MERCHANDISE From flasks and phone holders to work bags and caps – Permaroof is getting you all set for working on site this summer with eight bundles of Firestone RubberCover goodies. The kit, which also comes with a safety helmet stress ball, will help builders get organised and stay safe while working in the midst of the coronavirus pandemic.

When it comes to what you need on site we’ve got it covered, including this Permaroof bag of goodies.

FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BS024

FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BS023

2

X 12 CANS OF SANITISER

BOSTIK SURFACE SANITISER SPRAY Bostik has launched a new Surface Sanitiser Spray that’s specially formulated to kill 99.9 per cent of bacteria. Containing 80 per cent alcohol, the fast-drying formula complies with sanitiser standards EN1276, EN14476 and EN1650. Covering up to 14m2, the 400ml aerosol is quick and easy to apply across large areas using the portable spray canister and dries in just five minutes. Alcohol-based sanitisers have been found to be effective at combating many types of bacteria and enveloped viruses, including coronaviruses, influenza, SARS and hepatitis.

Come out to spray and be site ready with Bostik – two of these 12 packs of Surface Sanitiser Spray must be won!

FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BS025

20

BAGS OF 20KG ADHESIVE

DUNLOP CS1-12 ULTRA FLEXIBLE TILE ADHESIVE 20KG Win a 20kg pack of Dunlop CS112 Ultra Flexible Tile Adhesive. Its S1 deformability means it can be used on difficult backgrounds with limited movement. The product gives you more time to tile, mix and fix with a three-hour pot life and 30-45 minutes on the wall to set your tiles. Not only that, because it dries in 12 hours, you can grout the next morning.

Stick with us and you’ll have the chance of winning every month, including a 20kg pack of Dunlop Ultra Flexible Tile Adhesive.

FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BS026

Easy to Enter! It’s now easier than ever before to enter the competitions on our website. We’ve collected all the competitions on one handy page, meaning you only have to enter your details once! www.rdr.link/BS027 36

I

SEPTEMBER 2020 PROFESSIONAL BUILDER

036_PB_SEPT20_Layout 1 04/08/2020 12:41 Page 37

1

SLIDING DOOR SYSTEM

ECLISSE VETROGLIDE MINIMA Add an Eclisse Vetroglide Minima surface mounted sliding door system to your next project. It is suitable for a utility, pantry or living area where a hinged door is impractical and takes up too much space. The prize includes a complete wall mounted sliding door system, manufactured from stainless steel with hangers, including a satin glass door and a round flush pull handle for a contemporary look.

Our digital reader enquiry service opens doors to all the latest products and solutions, as well as the chance to enter our ‘Free-for-All’ competitions. Simply use the link below to enter.

FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BS028

1

SET OF DISCS AND BLADES

NORTON CLIPPER Norton Clipper’s range has broken new ground with movement into four new application sectors: wood and composites, multi-materials, veneer and laminates, and aluminium. While the new Norton Quantum3 LCG wheels provide a cost-effective solution for smaller jobs that need extra precision and are a great alternative to flap and fibre discs.

If you make the cut in our prize draw, you’ll receive one pack of 10 Quantum3 LCG grinding discs, one Clipper Pro Multimaterial 190x3, one Clipper Pro Multimaterial 160x3, and one pack of 10 KIT 10 HCS Jigsaw Blades.

FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BS029

038_PB_SEPT20_Layout 1 04/08/2020 12:41 Page 38

roofing, flooring & insulation

SEAL THE DEAL Introducing Seal It – the next generation of hybrid roofing membrane from Bond-It

lthough there are many roofing and weatherproofing compounds on the market, most roofing contractors have a favourite product that they will use time after time. Part of the reason for this is that all compounds appear to do more or less the same job. Indeed, it is a fact that in some installations the choice of compound is not critical, particularly given the tolerance there is in the products on the market. But the tolerance level can be stretched too far, and often we don’t assess correctly the whole criteria required by a particular installation.

To ensure the right product is used for the right installation, a number of factors have to be considered. How damp is it, and will it be prone to water retention?

How long for the product to cure in order to become resistant to water and moisture? With roofing applications weather is always an unknown quantity and can often lead to roofing installations failing because of too much H2O. It is not always possible to cover a roof to give protection from the elements and we cannot control the weather to give us consecutive days of sunshine.

What materials are involved in the installation? Will the surface requiring priming allow the compound to adhere?

Galvanised metals, in particular, offer little keying properties for most acrylic-based products, and will inherently require a

A

SYSTEM COMPONENTS: Seal It Liquid Membrane is a ‘one coat roof seal’, professional grade hybrid roof coating available in either white or grey. It is solvent-free and nonflammable, making it a safer to use, one part, moisture cure, easy to apply coating. There’s outstanding water resistance, weatherproofing characteristics, and self-levelling properties, and it is crack bridging, nonshrinking and non-cracking. The product is compatible for use with most common roofing materials.

Primer: A one-part solvent-free primer for preparation of bitumen surfaces and roofing.

Reinforcing Mat: A high grade 100 per cent polyester fabric which is nonwoven and spun-bonded to offer reinforcement to blisters, splits, seams, details, joints, and penetrations, etc.,

I

38 SEPTEMBER 2020 PROFESSIONAL BUILDER

offering twice the strength once incorporated. It is ideal for areas subject to high movement and is tear and puncture resistant.

Cracks & Edging Sealer: A hybrid polymer sealer suitable for filling cracks, edges, details, and small gaps prior to application of Seal It Liquid Membrane.

Alternatively, it can also be used after Seal It Liquid Membrane application to secure edgings and seals to create a self-terminating flashing or provide extra protection around roof elements, such as chimneys, air vents, etc.

Accelerator: For colder climates, where the air temperature can affect the cure process, Seal It Accelerator can be mixed with Liquid Membrane to speed up drying rates. When used in conjunction with the Accelerator, Seal It Liquid Membrane will withstand temperatures down to -20oC.

038_PB_SEPT20_Layout 1 04/08/2020 12:41 Page 39

primer in order to fix the compound.

Waiting for the primer to dry before applying the compound can extend the application time considerably. Also, how flexible is the material? If prone to movement then a product needs to be used that will give with oscillation and won’t break down or crack. Does the product need to be high-build, and will it give a uniform one coat application?

Dependant on the viscosity of the liquid will it actually flow and reduce the protective layer, or will it retain its properties, allowing the product to be moulded into areas where required most?

Ventilation will also have a bearing on the product specification. In areas of poor ventilation high VOC products can cause irritation and, in extreme cases, nausea and dizziness to the applicator, as well as subsequent residents.

Performing Seal

There are many things to consider when choosing the right product, but with Bond It’s Seal It One Coat Room Membrane, weatherproofing situations are made easy, and it comes with added benefits.

Seal It Liquid Membrane one coat roof seal is an easy-to-apply one coat roof seal offering a modern alternative to traditional GRP, PU, silicone, and bitumen roof coatings. The material is a highly reflective, solvent-free, non-flammable liquid membrane formulated for professional roofing applications and requires no special training to apply.

Designed to be used on its own, in more demanding situations it can, however, be used in conjunction with a primer, accelerator, reinforcement mat and edging, and trimming sealer. Altogether, the system delivers a high performance, watertight, permanently flexible, and extremely durable barrier coating for all existing roof substrates which is guaranteed for 25 years.

It offers primerless adhesion on a wide

variety of building and roofing surfaces, such as metal, treated and untreated wood, brick, stone, polyester, glass, lead, bitumen coating, tile, plastics, polycarbonate, and concrete – all without heating or bonding. There is a wide range of applications, including repairing flat roofs, pitch roofs (less than 10 degrees), leaking flashing, guttering and roof lights.

It is also suitable for cracked roofing panels, chimney stacks, corrugated or plate roofing materials, zinc, steel, fibrecement and façade panels, creating an impermeable seal to repel water damage and providing resistance to degradation from natural weathering like rain, snow and sunlight. Zinc guttering, downpipes and ventilation ducts can also be tackled.

Based on advanced hybrid technology and developed by the chemists at Bond It in the UK, this product remains permanently flexible once cured and will not harden or soften even under extremes of weather, temperature, UV radiation and external chemical attack.

There’s excellent resistance to ageing, ultra-violet attack and discolouration, whilst under test conditions, Seal It Liquid Membrane was shown to have superb cool roof thermal properties, outperforming black bitumen by 36 per cent at just 0.8mm thickness. It was also 11.3 per cent more efficient than solar reflective paint, all helping to reduce energy costs.

FOR MORE INFORMATION ON SEAL IT, VISIT WWW.RDR.LINK/BS030

I

PROFESSIONAL BUILDER SEPTEMBER 2020 39

PB page grid_Layout 1 31/07/2020 13:46 Page 1

041_PB_SEPT20_Layout 1 04/08/2020 12:42 Page 41

roofing, flooring & insulation

BREATHE EASY Nick King, Area Account Manager at Klober, separates fact from fiction when it comes to breathable roofing membranes

oofing membranes are strong weathering barriers installed underneath the roofing covering to reduce the effect of wind loading and provide a secondary barrier against wind-driven rain and snow. The most common types of roofing membranes fall into two categories, breathable and nonbreathable membranes. While both provide the essential barrier needed to protect the property from unexpected water ingress, there are key distinctions between them.

R

Breathable vs Non-breathable

British Standard BS 5250: ‘Code of practice for control of condensation in buildings’ stipulates rules for avoiding problems of high moisture levels and condensation in buildings. Depending on how airtight the building is, this will influence the movement of air inside and how much moisture vapour will reach the roof space. With modern buildings developed to be as energy efficient as possible, new homes tend to be more airtight and at a greater risk of condensation. As a result, it is crucial that adequate roof ventilation is installed to allow moisture to escape.

A non-breathable membrane essentially does not have the same air permeability as a breathable membrane.

This means that breathable options have less vapour resistance so water vapour can exit freely, potentially without the need for separate ventilation above the roofing insulation.

The obvious advantage with a breathable type of membrane, therefore, is that the risk of condensation is lowered significantly when compared to its nonbreathable counterpart. While breathable variants may mitigate the need for more traditional forms of secondary ventilation, it is likely that additional ventilation, such as eaves or ridge ventilation, will still be required.

Because the term ‘breathable’ implies that the membrane is self-sufficiently ventilating, we often find that builders consciously omit additional ventilation measures. This is quite simply a misconception. Only in cases where the membrane has been third-party approved as not needing additional ventilation is this the case. My advice is to be extra vigilant around claims of validity. The National House Building Council (NHBC), for instance, will only accept certain breathable membranes without additional

ventilation if they have relevant British Board of Agrément (BBA) approval as being air open as well as vapour permeable.

The most breathable membrane

Membranes that are the most breathable are known as air open and vapour permeable. These types of extraordinarily breathable membranes have been developed through extensive testing and innovation over the years. All Klober

I

PROFESSIONAL BUILDER SEPTEMBER 2020 41

041_PB_SEPT20_Layout 1 04/08/2020 12:42 Page 42

roofing, flooring & insulation

membranes are put through a series of rigorous tests, utilising specialist equipment to prove performance claims. Great emphasis is also placed on durability, with additional accelerated ageing tests designed to ensure the product will continue to perform in the future.

While these types of membranes do come at a premium, they are growing in popularity. Being both air open and vapour permeable minimises the risk of condensation forming, particularly during the drying out period of a building. This provides extra reassurance for building and roofing contractors that problems with condensation during this vulnerable time can be avoided, in addition to simplifying the ventilation design and installation process.

Another key benefit of using an air open vapour permeable membrane is that they are ideal for complex roofing designs with lots of breaks in the roof line structure, such as skylights or compartmentalised roofs for apartment

complexes. More design freedom is made possible in these scenarios, as by opting for a membrane like this means that the roofing design does not need to factor additional ventilation.

Another practical use for the most breathable membrane would be to support a roofing contractor tasked with ventilating the roofs of a ‘lean to’ extension at the rear of a property. Often it is a struggle to install high-level ventilation in these scenarios. By choosing an airopen vapour-permeable membrane, this problem is conveniently solved while remaining compliant and effective.

For buildings that require a certain roofing aesthetic, a traditional mortar ridge line, instead of the modern dry ridge system, could be a requirement. In these instances, where you cannot fix any ventilation through the ridge line, having a vapour-permeable membrane to take care of the ventilation is advantageous.

Condensation in buildings needs to be taken seriously and Klober’s mission is to ensure that building and roofing contractors have the best products available to ensure the most robust and high-performance roofing. This is why Permo Air, the most breathable membrane on the market, has been developed. This premium air-open vapour-permeable membrane is the ideal solution where simplified and compliant roofing protection and ventilation combined is required.

FOR MORE INFORMATION ABOUT KLOBER PERMO AIR VISIT WWW.RDR.LINK/BS031

PB page grid_Layout 1 31/07/2020 10:36 Page 1

044_PB_SEPT20_Layout 1 04/08/2020 12:43 Page 44

roofing, flooring & insulation Image courtesy of Magic Lofts_Keylite

THE ROOF OVER YOUR HEAD The National Association of Rooflight Manufacturers, (NARM) has recently received a number of complaints relating to glass rooflights which have either been sourced from a disreputable manufacturer, or fabricated by a non-specialist builder. NARM Product Standards Representative, Jeremy Dunn highlights a number of concerns regarding these.

1. Safety of building occupants

To ensure those below are safe, the first choice for the inner pane of a rooflight should be a laminated glass. If the inner pane should break, this minimises the risk of any glass falling into the room beneath and consequent injury.

Toughened glass inner panes bring a risk of shattering and falling into the room beneath (occasionally spontaneously, but certainly if impacted). NARM is aware of some manufacturers taking advantage of the fact that the term ‘toughened’ implies safety. In this instance, it does not.

British Standards define that inner panes must always be laminated wherever rooflights are more than 5 metres above floor level (increased to 13 metres in limited circumstances) or are

I

located over water (e.g. swimming pools). The British Standard may permit use of toughened inner panes in other applications but only if a stringent risk assessment is carried out, confirming that its use does not give any additional risk to those below the rooflight. It is difficult to see how use of a toughened rather than laminated glass inner pane doesn’t present a risk to anyone beneath the rooflight, so you should always ensure that the inner pane is laminated glass.

Some more economical designs consist of nothing more than a doubleglazed unit stepped on all four sides with no perimeter frame, with the outer pane

44 SEPTEMBER 2020 PROFESSIONAL BUILDER

Image courtesy of Glazing Vision

sealed to the top of an upstand and the inner pane hanging inside the upstand.

Such designs are not preferred, having much greater reliance on quality of site installation, but if they are used it is essential that the installer provides a continuous support for the inner pane on all four sides. If the outer pane should be broken, this will avoid the risk of the whole rooflight dropping into the building beneath. Should this be overlooked, or the work carried out to a poor standard,

044_PB_SEPT20_Layout 1 04/08/2020 12:43 Page 45

there is a serious risk of injury to anybody below should the outer pane of glass break or the edge seal fail.

Toughened glass inner panes bring a risk of shattering and falling into the room beneath

2. Safety for personnel accessing the roof

In addition to using a laminated inner pane to protect building users, rooflights can also be specified and designed to be non-fragile. This is intended to ensure that anyone accidentally walking or falling onto the rooflight will not fall through it, even if the glass is broken or the rooflight damaged. In this instance, a 9.5mm or 11.5mm laminated inner pane is usually necessary (depending on rooflight size) to comply with non-fragility requirements.

3. Watertightness and water run-off

Another major cause for complaints has been leaking rooflights causing damage to roof structures and interior decorations. NARM has been contacted regarding instances where the glazing frame has been poorly designed, or the rooflight has been installed poorly and/or without sufficient pitch to allow water run-off, resulting in water building up on the glazing and eventually penetrating edge seals.

Most glass incorporates a glass unit factory bonded into a fully thermally broken aluminium frame, which includes a drip detail to ensure the unit is fully watertight as soon as it is fitted onto an upstand. They should be sealed to the upstand on site (for airtightness as well as watertightness), but the seal is only a secondary seal, rather than the primary means of preventing water ingress. In some more economic designs there is no frame, and the glass is simply sealed to the upstand on site. The absence of any drip detail on a frame means water can easily track back on the underside of the glass, and watertightness of the units becomes entirely dependent on the quality of the site applied seal (often onto an upstand which is not flat and level, after the upstand itself has been weathered), which can cause leaks.

Glass is not completely rigid and any glass rooflight will bow slightly under the effect of gravity. Flat glass rooflights should therefore always be installed at a

slight pitch to avoid ponding (which would otherwise occur if the bow created a negative pitch). Typically, smaller rooflights should be installed at 3-degree pitch, and larger flat glass rooflights should be installed at 5-degree pitch. You should always make sure that the contractor who is building the upstand is aware of this pitch requirement, to avoid the unsightly problems associated with ponding (including rapid dirt build-up, and potential water ingress).

Some rooflights are offered with “selfcleaning” glass, which is misleading: true self-cleaning glass (such as Pilkington Activ) works best at pitches above 30 degrees, with a minimum pitch of 10 degrees so is not suitable for flat glass rooflights. Some grades of low

To ensure regulatory compliance and appropriate safety standards check the rooflight has been supplied by an NARM member

maintenance or easy-clean glass can be used, but still require regular cleaning.

4. Security For domestic properties, Part Q Building Regulations state that rooflights deemed as easily accessible need to be proven to resist criminal attack or incorporate features that are proven to reduce crime.

We’re aware of rooflights being supplied for domestic use with no mention of Part Q. Even rooflights supplied with a laminated inner pane may not pass Part Q testing as the outer pane could be broken and then the inner pane just lifted out of the hole.

5. Thermal performance

It’s important that manufacturers state, ‘whole product’ U-values to ensure thermal performance which will allow compliance with Part L Building Regulations. Some manufacturers are quoting ‘centre pane’ U-values which do not take into account edge spacers and frame construction. The thermal performance of a rooflight must be considered for the whole assembly because, while glazing may be compliant, poor frame design can affect thermal performance. This can result in higher energy bills for building users and subsequent unwanted higher CO2 emissions.

FURTHER INFORMATION AND NARM TECHNICAL DOCUMENTS ON SAFETY IN RELATION TO ROOFLIGHT SPECIFICATION, PLUS A COMPLETE LIST OF NARM MEMBER COMPANIES, CAN BE ACCESSED BY VISITING WWW.RDR.LINK/BS032

I

PROFESSIONAL BUILDER SEPTEMBER 2020 45

046_PB_SEPT20_Layout 1 04/08/2020 12:43 Page 46

roofing, flooring & insulation Permaroof’s RubberCover Training Centre has instructed nearly 5,000 tradespeople in the correct installation of EPDM.

RUBBER STAMP PDM, a product that is manufactured from synthetic rubber compounds and is rolled to different weights under pressure, has a proven track record around the world for longevity, waterproofing and weather-ability in both domestic and commercial situations.

When a complete system, which includes a membrane, adhesive, tape, and primer from the same brand is used, contractors can expect the material to withstand the elements for more than 50 years.

Proof of this is already in action; Firestone’s first EPDM installation at Albo Manufacturing in Wisconsin is marking its fortieth year with no reported issues even despite tornadoes, snow, and extreme sun hitting the area over the past four decades. In the UK, both John and Adrian can attest to installations they know have surpassed the 30-year mark.

E

Adrian Buttress, managing director of EPDM rubber roofing specialists Permaroof, and John McMullan, general manager at Firestone Building Products UK & Ireland, discuss what makes rubber roofing so long lasting which was the commonly used flat roofing material at that time. The Arab oil embargo subsequently drove the price of asphalt up even further and meant what was available was often poor quality. This created a sudden and strong demand for an alternative to enter the market.

John comments: “Despite demand being strong, and the product proving popular, it was still incredibly difficult to source EPDM and waiting lists were long as a result. At this point, Firestone spotted the opportunity and decided to leverage its knowledge and experience of rubber

The history behind EPDM rubber roofing

The Occupational Safety and Health Act (OSHA) became law in the 1970s as well as the Passage of the Clean Air Amendment Act, changing the roofing industry by negatively impacting asphalt

I

46 SEPTEMBER 2020 PROFESSIONAL BUILDER

manufacturing to enter the market, launching its own EPDM rubber roofing product in 1980.”

Why is EPDM so long lasting?

Field testing and proven installations, such as the very first Firestone project in Wisconsin, are behind the expected EPDM lifespan of over 50 years. There are a few reasons for this longevity, as Adrian explains: “Firstly, when looking at alternative flat roofing options, they often degrade due to loss of mechanical properties caused by exposure to UV. Even temperature fluctuations that are normal for the changing UK seasons cause stress in materials with low degrees of flexibility and elasticity. This results in cracks and tearing – particularly at any joints or details.

“EPDM rubber roofs, when applied correctly to adequately prepared roof decks, far outperform other types of roofing. As well as the excellent

046_PB_SEPT20_Layout 1 04/08/2020 12:44 Page 47

waterproofing, EPDM is resistant to UV radiation, as well as ozone and temperature fluctuations, which would otherwise age the product significantly.

EPDM membranes have over 300 per cent elasticity to accommodate building movement and extremes in temperature, whilst flexibility and elasticity are retained down to temperatures as low as -45oC. “EPDM membranes can be manufactured in very large sizes up to 15.25m x 30.5m, meaning many small flat roofs can be installed with a single sheet of membrane. The need for sitefabricated joints is significantly reduced, improving the productivity of the roof waterproofing installation. Furthermore, if the membrane ever becomes damaged – for example, due to vandalism or other mechanical damage – then an effective long-term repair of the EPDM rubber is a simple process.”

John concludes: “Ultimately, these benefits speak for themselves, but it must be remembered that this longevity is only assured by fully trained contractors. A

high standard of installation is essential to secure the positive reputation of the wider industry, as well as the individual installer and their business. Even the most qualified and experienced roofers should keep on top of continuing professional development (CPD) to enhance their skills in an ever-changing sector and, in turn, help to raise industry standards. CPD is something that Firestone and Permaroof champion as a critical part of their success. Permaroof operate their RubberCover Training Centre and have trained nearly 5,000

people from across the country over the past 16 years.

“The natural characteristics of EPDM – resistance to UV and temperature fluctuations – and how it is supplied – in large sheets with no seams – are the key reasons for its outstanding longevity.

While this not only offers an attractive offer to the end-user and therefore the contractor, EPDM represents an ecofriendly waterproofing option. The inert nature of EPDM combined with its long service life results in an extremely low environmental impact. Not only does the manufacturing process take relatively little energy but with the possibility of renovation to extend the service life, and ultimate recyclability, EPDM is a truly green roof waterproofing solution.”

FOR FURTHER INFORMATION ON PERMAROOF UK VISIT WWW.RDR.LINK/BS033 FOR MORE INFORMATION ON FIRESTONE BUILDING PRODUCTS VISIT WWW.RDR.LINK/BS034

PB page grid_Layout 1 31/07/2020 10:37 Page 1

049_PB_SEPT20_Layout 1 04/08/2020 12:44 Page 49

roofing, flooring & insulation TECHNICAL TEAM TIPS – NO 18

MAKE HAY AS THE SUN SHINES Stuart Nicholson from Marley, explains how growing demand for solar solutions is opening up a new commercial opportunity for those working in the trade

s we look for more sustainable ways to access energy, demand for solar panel solutions is growing.

And, with the Energy Savings Trust estimating that adding solar panels to a roof space can cut an annual household electricity bill by over £250, it’s easy to see why solar panels are proving an attractive solution for homeowners.

Photovoltaics (PV) systems – better known as solar panels – are already proving popular when it comes to the delivery of sustainable energy solutions to help meet the UK target of net zero greenhouse emissions by 2050. And as home energy costs continue to increase, consumers are also actively seeking ways to help keep bills to a minimum.

And, with no specialist skills or expertise required to install, this presents an excellent business building opportunity for the construction trade, with roofing contractors in a prime position to widen their service offering, and add solar panel installations to their portfolio of roofing solutions.

A

Many contractors may believe that solar installations require additional skills and expertise, but this is not the case. By following the straightforward installation procedures that are available, and taking the time to build up confidence around a new product solution, roofers shouldn’t be hesitant about undertaking solar panel jobs, and can begin to examine how they can open up new revenue streams to complement more traditional roofing installations.

with final fixings and flashings.

The new system is designed for an integrated installation over a standard roof construction, with 25mm battens in place and a continuous functional underfelt that terminates in a gutter. For existing battens of other sizes, or sarked roofs, alternative kits are available. Marley SolarTile works seamlessly with existing roof structures to directly replace roof tile sections and is a quick and simple way to provide a greener and cost-effective energy source for homeowners.

Integrated and easy

Marley SolarTile is a roof-integrated solar panel solution. All the required components in the installation kit are housed in colour coded boxes, which are accompanied by an easy-to-follow instruction guide, meaning contractors can follow several clear steps to quickly get to grips with the simple installation process. This includes securing the initial fixings, placing the solar tile in position, undertaking a push-fit process for additional tiles, and finishing the install

Installation tips

For contractors looking to add solar panel installations alongside more conventional roofing services, following sound advice and practical tips will help projects run smoothly and help to build up experience and expertise.

I

PROFESSIONAL BUILDER SEPTEMBER 2020 49

049_PB_SEPT20_Layout 1 04/08/2020 12:44 Page 50

roofing, flooring & insulation

Installation overview – When thinking about solar panel installs that integrate with interlocking tiles, you should set the lower gap at 130-150mm. When working on a slate roof, it is best to align the bottom edge of the solar panel with the slate line. This may require that the slates below the panels are nailed in advance of the panels being fitted. Finally, always start the install at the bottom left of the area and move to the right as each column is finished.

Fixing Guidance – Remember that flashings may have sharp edges, so wearing protective gloves is always recommended. In addition, installations must comply with local regulations on lightning protection, so check this is in place.

Electrical issues – It is important to electrically test each solar panel prior to

installation and the Marley SolarTile installation kit provides information on how to do this. It is recommended that the panel’s electrical cables are passed through the roofing membrane laps for connection inside the building or connected to adjacent panels in the batten space. Always choose to connect panels in rows or columns based on how shaded the roof area could potentially be. And, finally, the panel system can be installed with the junction box at the top or the bottom of the install area for added flexibility.

Marley has created a suite of helpful demonstration materials to enable contractors to gain confidence around solar panel solutions and successful installations to help meet the forecasted growth of demand for solar roofing solutions in the years ahead. The materials include short explanatory videos that cover the entire installation process.

“With no specialist skills required, solar panels are an excellent business opportunity for builders” FOR MORE INFORMATION ON MARLEY SOLARTILE VISIT WWW.RDR.LINK/BS035 IF YOU WANT TO VIEW A DEMONSTRATION INSTALLATION VIDEO VISIT WWW.RDR.LINK/BS036

PB page grid_Layout 1 31/07/2020 10:39 Page 1

052_PB_SEPT20_Layout 1 04/08/2020 12:45 Page 52

roofing, flooring & insulation

Already well known for its GRP products, Stormking is supplying the flat roofing market with not one but two new solutions. ince 1985 Stormking has pioneered off-site fabrication processes to produce GRP components for construction projects across the UK. Thanks to the ever-evolving demand for its solutions, the company has developed a wide product portfolio, which reflects the needs of builders working across domestic projects.

As a result, the product range extends from chimney stacks and bay window roofs, to dormer roofs and door canopies.

It is that experience that has enabled the manufacturer to produce two new flat roofing systems: StormDeck-GRP flat roofing and StormDeck-PU flat roofing.

Two roofing solutions which, the company claims, hit the mark on cost, ease-ofinstallation and durability, making them suitable for a wide range of jobs, particularly domestic repairs and maintenance. These latest solutions seal an important gap in the existing product range and provide a new offering in both the new-build and refurb domestic flatroofing sector.

StormDeck-GRP flat roofing is a highperformance, liquid-applied flat roofing system designed to provide a durable watertight seal on roofs, walkways and balconies. A built-up system, it comprises of GRP chopped strand mat, fire-retardant polyester resin, curing catalyst and polymer topcoat. Offering a solution for where aesthetic is important and for foot trafficked areas, it is tough, robust and offers longterm performance. It also comes with a range of accessories, including trims, coloured minerals, application rollers, cleaners and consumables.

Presenting a modern-take on flat roof, cold-applied liquid systems, StormDeckPU provides a fast and effective solution.

A one coat system which cures incredibly quickly, it can be installed even when the British weather looks set to turn. Simple to apply straight to the prepared deck, it offers a faster alternative to traditional GRP system and is ideal for projects where speed of installation is essential.

S

I

DOMESTIC BLISS GRP versus PU

GRP and PU liquid applied roofing systems have many similarities, but they also offer unique qualities. GRP might be preferential to PU, as GRP can be produced in a range of colours and finishes, and utilises different colour

52 SEPTEMBER 2020 PROFESSIONAL BUILDER

minerals, which makes it perfect for projects that require a visually attractive roof design. On the other hand, PU would perhaps be better suited to projects where time is of the essence, or there is complicated detailing work to be completed.

052_PB_SEPT20_Layout 1 04/08/2020 12:45 Page 53

However, being a single coat system, PU is much faster to install when compared to GRP which, being a built-up system, is more complex and demanding to install.

Furthermore, GRP takes longer to cure and requires zero moisture in the air, whereas PU cures very quickly and can be installed in damp weather – ideal for projects which need to be completed swiftly.

Giving the customer more choices

When it comes to selecting either PU or GRP, it essentially depends on the individual requirements of the project. On domestic projects ease-of-installation is essential, but so is cost. Stormking understands these are the factors that will inevitably determine which solution is better suited. It is why the company has created two flat roof waterproofing solutions, in order to give customers the choice and freedom to select a system that works for them.

“Having previously worked with the flat roof market for over 10 years, we identified an opportunity to enter with

more than a single proposition. We wanted to offer customers a choice,” commented Kevin Bohea, Stormking’s Managing Director. “We believe that customers need choice when making any successful decision, which is why we have launched two new systems that reflect the needs of any client. Built-up GRP systems are well-established and our system will offer contractors with a costeffective alternative, without compromising installation and performance. PU is still relatively new to

the market and offers many advantages, especially speed of installation and fast curing, making it ideal for time-sensitive projects. We are confident that these two systems are ideal, offering a reliable, costeffective solution for flat roof requirements and we hope to have given customers the best of both worlds when it comes to selection.”

FOR MORE INFORMATION ON STORMKING’S NEW FLAT ROOFING SYSTEMS, VISIT WWW.RDR.LINK/BS037

054_PB_SEPT20_Layout 1 04/08/2020 12:45 Page 54

roofing, flooring & insulation product round-up

ROOFING UNDERLAY

High-performance products from the A. Proctor Group have been selected for use in the construction of a British Antarctic Survey building. Taking into account the extreme conditions, the manufacturer recommended Roofshield for the roof and Procheck 500 as a VCL for the walls. Roofshield is an air and vapour permeable, highly waterresistant roofing underlay, which allows for even very complex pitched roofs to breathe, without the need for air gaps or secondary venting.

GET MORE DETAILS AT: WWW.RDR.LINK/BS038

MEMBRANE

As regulations catch up post Grenfell, DuPont has developed an airtight vapour control layer in its high performance AirGuard range, offering advanced, non-toxic, fire-resistance.

While Tyvek FireCurb Housewrap forms a weather-protective, vapouropen lining behind ventilated facades, new AirGuard A2 FR AVCL offers energy-saving, moisture management, improved interior air quality and climatic comfort, together with its added fire-retardant function.

GET MORE DETAILS AT: WWW.RDR.LINK/BS040

GREEN ROOF

Green roofs are proven to provide practical benefits, including improving air quality, cooling urban environments, managing heavy rainfall, insulating buildings and even boosting the mental well-being of those looking out on to them. Thanks to the modular solutions available from Wallbarn, installation has been made easier and roof spaces both large and small can now benefit.

GET MORE DETAILS AT: WWW.RDR.LINK/BS042

BITUMINOUS CORRUGATED ROOFING

A key selling point of the Onduline Building Products roofing system is that it is made from 50 – 60 per cent recycled materials, which gives it a carbon footprint advantage over many roofing products. This eco-friendly roofing solution can be used in timber frame buildings, the equestrian and agricultural sectors, log cabins, orangeries, sheds, summer houses and pergolas, with pitches as low as 12.5°.

GET MORE DETAILS AT: WWW.RDR.LINK/BS044

I

54 SEPTEMBER 2020 PROFESSIONAL BUILDER

PARTICLEBOARD

Particleboard products, such as the CaberFloor range of flooring systems from Norbord, combine structural strength, stability and reliability with low cost and ease of installation.

The same company’s CaberDek is guaranteed to withstand full exposure to the weather for up to 42 days when laid in accordance with fitting instructions.

GET MORE DETAILS AT: WWW.RDR.LINK/BS039

CONSERVATORY ROOF

The easy-to-fit Eurocell Equinox solid conservatory roof has enjoyed a series of updates. Individual full height glazing panels up to one metre wide and three metres high of clear glass allow lighter, sunlit conservatories and several panels can be accommodated that give an impression of even more space. In addition, aluminium rafters in the lightweight roof have been separated from the deck, enlarging the air gap, making it the only fully ventilated solid roof solution available in the UK GET MORE DETAILS AT: WWW.RDR.LINK/BS041

INSULATION

Super-slim insulation which maximises comfort and protection in a limited space is what Recticel claims for DeckVQ. Not only does the material achieve a thermal performance core of lambda 0.006, an encapsulated VIP within a high-density PIR shell eliminates the risk of puncturing – a potential hazard with non-encapsulated VIPs that could result in a significant loss of insulation value.

GET MORE DETAILS AT: WWW.RDR.LINK/BS043

FLOORING

Rapid, durable products with added sustainability are what builders are demanding, and that’s what Sika is claiming for its ‘next generation’ range of primers and coatings.

Sikafloor-150 and Sikafloor-151 are multi-purpose primers comprising two-part, epoxy resin. Suitable for use as levelling mortar and mortar screed, they are rapid curing, exhibit excellent penetration, and are ideal for low-to-medium absorbent substrates.

GET MORE DETAILS AT: WWW.RDR.LINK/BS045

PB page grid_Layout 1 31/07/2020 10:41 Page 1

056_PB_SEPT20_Layout 1 04/08/2020 12:46 Page 56

bricks, blocks & paving

UNLOCKING POTENTIAL Andy Batterham, Group Technical & Innovation Director – Ibstock Plc looks at the vital role the construction sector will play in Britain’s economic recovery and examines some of the steps the company is taking to support the industry.

New ways of working

Although the Coronavirus pandemic still dominates the news agenda, and directly impacts each of our daily lives, there are positive signs that the UK construction industry is already adapting to the new normal.

Across the UK, the majority of building sites have reopened, and construction professionals have been able to pick up their tools and head back to work. Indeed, the ability to head back to work is particularly welcome news in a sector that has a significant number of self-employed people, where very often downtime – planned or otherwise – means they don’t get paid.

Of course, health and safety remains paramount and, despite the easing of some site restrictions, contractors and construction specialists must still adhere to stringent government regulations, including maintaining correct social

I

distancing, wearing the correct PPE, and observing hygiene measures.

Although nobody can say for sure how long this ‘new normal’ will be part of our lives, what we do know is it signals new ways of working – a challenge the construction industry is already rising to meet, as it helps lead the British economy towards recovery.

Hopeful signs

While the pandemic, and subsequent lockdown, undoubtedly had a seismic impact on construction business’s productivity and profitability (new estimates suggest it cost the sector up to £237m a day across March), there are signs of renewed confidence across the industry.

Much of this has been triggered by the government’s recent announcement which put the construction sector firmly at the heart of their plan for the UK’s economic recovery.

56 SEPTEMBER 2020 PROFESSIONAL BUILDER

The landmark pledge, delivered by the Prime Minister at the end of June, laid out plans to invest significantly in UK infrastructure and housebuilding projects, alongside introducing the most sweeping reforms to British planning regulations since the end of the Second World War. If the promised investment materialises, there will be significant opportunities to be taken by British construction businesses.

Moving forwards

As Britain’s largest manufacturer of clay and concrete building products, Ibstock sits at the heart of the construction industry supply chain; a position we think will help us lead the UK’s economic fight back. That’s why we have invested in our processes to ensure construction professionals have access to all the stock they need to do their job well.

In line with changes to government

056_PB_SEPT20_Layout 1 04/08/2020 12:46 Page 57

guidelines, we have launched a process of phased recommencement of activity across our national network of facilities.

The strategically led decision enables us to prioritise factories which are experiencing higher demand, ultimately helping us get crucial stock out to customers as projects re-start.

Across the past month, we have continued to scale-up activity throughout our facilities, working in partnership with the wider supply chain – including architects, specifiers and merchants – to ensure we are in close collaboration with the construction industry as activity further increases.

Of course, the health and safety of our workforce and customers remains our utmost priority and, to that end, we have implemented strict new regimens to safeguard those working at our facilities.

These include innovative temperature screening technology at the entrances of each site, alongside changes to workspaces and shift patterns to ensure

social distancing can be properly observed at all times.

As we move towards the next stage of the national response to Covid-19, we remain well placed to maintain an unbroken supply of goods to the UK construction industry. Thanks to previous investment in the reliability and capacity of our assets, we have maintained strong stock levels, in spite of the temporary suspension of work at our facilities.

And, as a British manufacturer, more than 95 per cent of the raw materials used in our products are sourced from UK quarries. When coupled with the scope of our unrivalled nationwide manufacturing

network, we’re able to minimise average radial delivery mileage, shoring-up our responsiveness and, ultimately, enabling us to get Britain building again.

We have also recently launched our innovative online Product Selector, a virtual tool which allows builders, architects, and specifiers to see each of our clay and building products in-situ on their project – before a single brick or block is laid.

Nobody knows for sure how long this new normal will be part of our lives, but I can think of no industry better placed to overcome the challenges – and grasp the opportunities – than construction. With sites returning to life and projects once again taking shape across the country, it’s a sign that – despite a slowdown the like of which we have never seen before – recovery is underway.

FOR MORE INFORMATION ON THE FULL RANGE OF PRODUCTS AND SERVICES OFFERED BY IBSTOCK VISIT: WWW.RDR.LINK/BS046

PB ad grid_Layout 1 04/08/2020 14:17 Page 34

059_PB_SEPT20_Layout 1 04/08/2020 12:47 Page 59

bricks, blocks & paving

TURN TO DUST

Lee Dunderdale, Product Manager at Aggregate Industries, outlines the choices available to the trades in cement. hen it comes to cement, it might be all too easy to assume that there is little in the way of scope for innovation. How different, after all, can one bag of cement be from another? The reality, however, is that there can be rather a lot of difference. In recent years the global cement industry has continued to reinvent itself. From the use of better materials to fulfil more sophisticated specification requirements, through to the emergence of low-carbon options to deliver optimised sustainability, and more, the sector is evolving rapidly to meet the needs of a changing world – and to disregard this means missing out on beneficial innovations.

W

Here in the UK, one of the challenges is that the cement market can be quite traditional. Typically, a builder or contractor will turn up to their local merchant and tend to ask for the same type or brand of cement that they have used time and time again, safe in the knowledge that it will effectively get the job done.

Application Specific However, while standard staple buys may make up a majority of purchases, it is equally important that tradespeople consider the wide range of application or solution-based products that are now available, with improved performance and ease of application just some of the benefits that can be accrued.

The good news is that in pre-empting the need for greater product diversification, recent years have seen

leading manufacturers invest in new cement products designed to fulfil niche issues. Take, for example, the introduction of sulphate resistant cement specifically developed to negate the impact of increased sulphate exposure in underground and marine environments, through to the beautiful white pigment cement designed to seamlessly blend in with architectural cast stone – the list goes on.

At Aggregate Industries this year alone we’ve recently launched three new high specification packed cement products specifically designed to fulfil a range of emerging customer requirements.

“Recent years have seen leading manufacturers invest in new cement products designed to fulfil niche issues. This year alone Aggregate Industries has launched three new high specification packed cement products specifically designed to fulfil a range of emerging customer requirements.”

I

PROFESSIONAL BUILDER SEPTEMBER 2020 59

059_PB_SEPT20_Layout 1 04/08/2020 12:48 Page 60

bricks, blocks & paving

This includes our new 40N strength High Performance Concrete, which offers the perfect solution for forming the base for domestic garages and driveways, alongside our 15N strength Instant Concrete which is ideal for garden sheds, greenhouses and domestic footpaths and steps that require quick setting. With no mixing required, and available in 20kg bags, both products are quick, easy and ready to use – making the lives of builders and contractors as hassle-free as possible.

The final new high-spec product, Premium Cement is a 42,5N cement made from a higher specification material, specially designed for applications that require extra strength such as steps, paths, concrete bases, and repair and maintenance projects.

Unlocking the full packed cement opportunity, however, relies not just on offering choice but supporting it with sound, informed support to the end user.

Here at Aggregate Industries, our support materials include easy-to-digest product

information, safety sheets and technical information – and all of our merchant partners get a dedicated account manager who they can deal with direct for a speedier, more personal response, which can then be passed on to their customers in branch.

As we look to the future of the cement industry, innovation is key to ensure we don’t fall behind where the rest of the world is moving towards. By championing all the latest developments, and taking the time to actively communicate the benefits to customers, manufacturers can play their part in helping ensure the road ahead for cement remains tailored to the demands of the buiding industry.

FOR MORE INFORMATION ABOUT AGGREGATE INDUSTRIES AND ITS RANGE OF PRODUCTS YOU CAN MAKE USE OF OUR DIGITAL READER ENQUIRY SERVICE BY ENTERING THE FOLLOWING LINK INTO YOUR BROWSER WWW.RDR.LINK/BS047

061_PB_SEPT20_Layout 1 04/08/2020 12:50 Page 61

bricks, blocks & paving

It’s used everywhere, but how much do you know about aircrete?

Jenny Smith-Andrews, Marketing Manager at H+H is set a few questions just to check

PB

Does it float?

Jenny Smith-Andrews (JSA) Actually yes.

Despite their credentials as a weightbearing structural material, aircrete blocks do actually float – because of the thousands of tiny air bubbles captured within the material. It will still hurt if you drop on your foot though.

PB

Can I cut and shape it using conventioanl hand tools?

JSA Again, yes. Unlike dense concrete or other lightweight aggregate blocks, you can cut aircrete blocks with a handsaw on site. Very handy for tricky details and for irregular shaped extensions.

PB

Can I use it sub-ground?

JSA Absolutely. Aircrete is resistant to moisture and sulfates, which means that it is very suitable for foundations. Look out for Foundation Blocks in Standard or HighStrength grade, which are capable of supporting three storey tall buildings.

PB

Will it meet Part L of the Building Regulations?

JSA Aircrete’s inherent thermal efficiency – largely down to those air bubbles – means that it has always been a good choice to build external walls that need to meet the energy efficiency standards of Part L. And yes, Part L is due to be revised – in fact, the new standard should have been introduced this year. If the new version is as we expect, then a cavity wall construction using aircrete blocks will still be a great choice.

If aircrete blocks are used with the ThinJoint System, then the wall will also provide outstanding air-tightness, making this a great option for Passivhaus construction.

PICKING THE

BLOCKS

PB

Is it sustainable?

JSA More and more specifiers and homeowners are concerned about the sustainability of the materials they use.

H+H aircrete is made using Pulverised Fuel Ash – a legacy waste product from decades of coal-fired energy generation.

It’s a great re-use for a material that would otherwise be left in landfill sites around the country. More to the point, aircrete doesn’t burn, rot or warp. An aircrete structure should have a lifespan of well over 100 years.

PB

PB

Is it available?

PB

Is it easy to find out about?

JSA There has been a lot of talk of product supply issues since the Coronavirus pandemic and lockdown caused some supply chain problems.

Aircrete is manufactured in the UK and the product is readily available through merchants.

Is it a Modern Methods of Construction solution?

JSA It’s difficult to avoid talk of Modern Methods of Construction (MMC) and government is doing as much as it can to encourage developers and housebuilders to use them.

Both the Thin-Joint System and Celcon Elements aircrete panels are defined as MMC. This means that MMC builds are still based on a familiar material – which is good news for the follow-on trades who will know exactly how to treat it.

JSA Much more technical information about performance, installation methods and applications is freely available on websites, via our own H+H online academy or on YouTube.

TO FIND OUR MORE ABOUT THE RANGE OF PRODUCTS FROM H+H VISIT WWW.RDR.LINK/BS048 THERE ARE A NUMBER OF ‘HOW TO’ VIDEOS AVAILABLE ON AIRCRETE. TO ACCESS THESE VISIT WWW.RDR.LINK/BS049

I

PROFESSIONAL BUILDER SEPTEMBER 2020 61

062_PB_SEPT20_Layout 1 04/08/2020 12:51 Page 62

bricks, blocks & paving

THE GREAT OUTDOORS

Jeremy Lee, Commercial Director at Bradstone, highlights why porcelain paving has become so popular in garden design, and offers his top tips for how to correctly install it.

ver the last couple of years, we’ve seen a real increase in the popularity of porcelain paving amongst homeowners, who are taken in by its aesthetic appeal and hard-wearing characteristics. It is remarkably dense, meaning it is scratch-resistant and lower maintenance than other paving materials, and thus it the ideal choice for high footfall paths, and for eye-catching areas which may feature a garden table and chairs. This is even more important now, as many homeowners buck the trend of ‘outdoor living’ meaning more time spent in their garden, and therefore a greater need for a long-lasting patio.

What’s more, smoother surfaced, 10mm thick versions are also available in selected ranges to allow homeowners to use the paving indoors, creating a harmonious flow from the house to the garden.

O

While the general process of laying porcelain is not too different from any other paving, there are some specific installation techniques, which will ensure the patio is long-wearing, laid to a highROMELI It is the fettled edges of Bradstone’s Romeli porcelain paving that provides what its suppliers describe as charm, character and a timeless look. It is a hard-wearing, scratch resistant, lower maintenance paver, designed to mimic the look of natural stone and offers a wide variation in colour. The pavers are available in 800x400mm single sized pavers in Buff Blend and Grey Blend finishes. Bradstone also offers a version that allows you to use this paving indoors.

I

62 SEPTEMBER 2020 PROFESSIONAL BUILDER

standard and therefore will meet the expectations of the customer. Always dry lay the patio first so you can ensure the homeowner is happy with the look and layout and, more importantly, that you have enough pavers. When laying porcelain paving, ensure you are using the correct bedding. Use a mechanical mixer to make a mortar of 4:1 sharp sand to Ordinary Portland Cement (OPC) and be sure to avoid building sand or white cement. To ensure the paver properly adheres to the bed, you should always use Bradbond Slurry Primer. Using a masonry brush, coat the entire underside of the flag immediately prior to laying.

Take care to avoid getting any primer on the face of the flags as it sets rock hard and can be impossible to remove if allowed to dry.”

TO FIND OUT MORE ABOUT BRADSTONE, VISIT WWW.RDR.LINK/BS050

PB page grid_Layout 1 31/07/2020 10:47 Page 1

064_PB_SEPT20_Layout 1 04/08/2020 12:51 Page 64

bricks, blocks & paving product round-up

NATURAL STONE

Cranbourne Stone offers large quantities of paving and step treads in sandstone, limestone, granite, travertine, and porcelain. The experts in bespoke natural stone can also create unique pieces using its in-house CNC bridge saws and waterjet machinery, extending the design possibilities even further.

GET MORE DETAILS AT: WWW.RDR.LINK/BS051

WEBSITE

The refreshed online presence for the SureCav cavity wall membrane delivers what it describes as a more concise, intuitive customer journey, whilst showcasing its potential for housebuilding. Visitors can benefit from up-to-date product information and comprehensive specification guides. The manufacturer of the system points to cost savings, enhanced sustainability, and lower U-values as just some of the benefits of SureCav, as well as increased floor space in the finished build.

GET MORE DETAILS AT: WWW.RDR.LINK/BS052

MORTAR PAVING SYSTEM

Streetpave is a complete threestage bedding, bonding and jointing mortar paving system.

Manufactured by Cemex, the BS 7533 compliant range consists of three products – PaveBase bedding mortar; PaveGrip priming slurry; and PaveFill flowing jointing mortar.

These can be used together for pavements constructed with clay, natural stone or concrete pavers. Its developers contend that this solution requires less maintenance and lasts longer – in some cases exceeding 40 years.

GET MORE DETAILS AT: WWW.RDR.LINK/BS054

SPIRIT LEVEL

Distributed in the UK by Rollins & Sons, the Kapro 787 Helius Level has two solid shockproof UV resistant acrylic lifetimeguaranteed vials, including a horizontal vial with 2 per cent gradient lines. The surface is finely milled for an accuracy of 0.5mm/m and features non-slip wall grips and shock absorbing end caps. The level is available in 24”, 36”, 48” and 72” lengths, whilst a four-piece set with carry bag is also available.

GET MORE DETAILS AT: WWW.RDR.LINK/BS055

STONE-EFFECT TILES

Harnessing the trend for natural materials, Ceramique Internationale has launched a collection of large format stoneeffect tiles. The Stoneline collection of porcelain tiles comprises a 300 x 600mm tile and a larger 600 x 600mm square tile, suitable for use on both walls and floors. The range is available in four authentic shades – natural, grey, light grey and anthracite.

GET MORE DETAILS AT: WWW.RDR.LINK/BS053

PAVING JOINTING COMPOUNDS

Supplied by Instarmac, the two versions of Geo-Fix ready mixed jointing compounds are Original, which comes in 20kg buckets in buff and grey, in addition to All Weather in 14kg buckets in natural stone, mid grey and slate grey. Both products are applied to joints with minimal effort.

GET MORE DETAILS AT: WWW.RDR.LINK/BS056

065_PB_SEPT20_Layout 1 04/08/2020 12:51 Page 65

GENERAL BUILDING LOW PITCH ROOFING

Marley has launched a new concrete interlocking tile, which can be used down to a minimum pitch of just 12.5 degrees. The new Mendip 12.5 has the same double pan design as the original concrete tile, but with four weatherproofing channels at the face of the tile to prevent water ingress from wind driven rain. To make it even more watertight, the tile has no nail hole and is instead installed with its own Mendip clip.

GET MORE DETAILS AT: WWW.RDR.LINK/BS057

MDF

Tough, easily worked and ideal for a range of building applications – that’s the promise from Norbord for its CaberWood range of Medium Density Fibreboard (MDF). Whether its skirting boards, architraves or mouldings, builders can be assured of the finish, routing capability and screw holding. Five grades are available from the basic lightweight general purpose grade, CaberWood MDF Trade, to the top-of-the-range, CaberWood MDF Industrial, a hard-working, deep routing, moisture-resistant product .

GET MORE DETAILS AT: WWW.RDR.LINK/BS058

MULTI-PURPOSE SCREWS

It’s the recessed double countersunk on the Vortex multi-purpose screw that reduces the likelihood of shearing.

Moreover, the sharp, wide and deep thread on the product features ‘Saw Fix’ serrated thread technology, enabling the product to quickly and easily power through surfaces. They can be used on a range of materials including hardwood, decking, MDF, plastic and sheet metal.

GET MORE DETAILS AT: WWW.RDR.LINK/BS059

HEAT PUMP GUARANTEES

DOOR HARDWARE

Whether it is traditional or contemporary applications, the variety of colours and styles in P C Henderson’s new range of flush pulls and lock sets should satisfy the trades. For homeowners it means their door hardware can complement the surrounding décor. The new range includes a door edge pull, designed for pocket doors, soft closing doors and heavier doors, which need a little more leverage. A new indicator lock has also been introduced.

GET MORE DETAILS AT: WWW.RDR.LINK/BS060

Grant UK Aerona³ units installed by a G1 Air Source Heat Pump Installer are now eligible for a 7-year guarantee, which is two years longer than the fiveyear heat pump guarantee previously available through the Scheme. This longer guarantee period is not only an added benefit of being a G1 Installer Scheme Member but it also provides peace of mind to homeowners.

DAMP-PROOFING RODS

Designed to be the fastest, cleanest, easiest and most effective rising damp treatment on the market, BBA-certified Dryrod damp-proofing rods from Safeguard Europe are synthetic rods, made from advanced polymers, impregnated with a silane/siloxane material that form a DPC in brick, coursed stone and cavity walls.

Developed to guarantee correct damp-proofing delivery each and every time, the rods can be installed effectively in highly saturated walls that are very porous and either highly alkaline – such as in new mortar – or with low alkalinity (old mortar).

GET MORE DETAILS AT: WWW.RDR.LINK/BS061

rdr.link

QUICK LINK FOR MORE INFO

FOR MORE DETAILS ABOUT THE G1 INSTALLER SCHEME VISIT WWW.RDR.LINK/BS062 FOR MORE INFORMATION ABOUT THE GRANT AIR SOURCE HEAT PUMP PRODUCT TRAINING COURSE VISIT WWW.RDR.LINK/BS063

Save time, make money all year with the reliable, easy to use and clean, pneumatically powered,

rdr.link

Bookmark into your browser and simply enter the unique 5 digit code for even faster access to more information.

vibration free Pnu-Point pointing tool.

sales@pnupoint.co.uk

066_PB_SEPT20_Layout 1 04/08/2020 12:52 Page 66

SEALANTS & ADHESIVES

WORKS WONDERS

Professional Builder speaks to Andy Cummins, Senior Product Manager at Geocel, to talk about the company’s latest product launches: THE WORKS PRO and THE WORKS PRO X. First of all, can you give us some background on MS Polymer sealants?

Andy Cummins (AC) MS Polymer sealants and adhesives are sometimes known as ‘hybrids.’ When we originally launched them twenty years ago, because of their non-staining attributes, the products were mainly used for sealing high value facade materials. Then in 2008, Geocel launched THE WORKS range. We wanted to make that same technology available to the wider market, and in particular for trade professionals to use on day-to-day jobs, where ease of application and long-term performance are both key.

Those already using them will know that MS Polymer products are popular because they feature many of the attributes of traditional sealants – yet with the flexibility and UV stability of silicones, the paintability of acrylics and the durability and toughness of polysulphides.

In addition, they boast the same properties as high quality ‘grab’ adhesives.

These types of sealants also offer some unique advantages of their own.

The non-staining properties mean that they are ideal not just for those high-end facades but also for projects like sealing marble or granite kitchen worktops.

With excellent adhesion properties they can also be used directly on wet or

PB

I

dry surfaces, including most plastics, tiles, wood, stone, and many more – and they will even bond and cure underwater. Plus, once applied, they also won’t attack synthetic materials, unlike their solvent counterparts.

Due to their performance benefits, and increasing demand from trade professionals, it’s meant that the market has become saturated with new products from a wide range of companies.

However, not all products will perform in the same way, and of course, for any trade professional, product reliability is key.

Tell us about the two new products and when would a trade professional use them?

AC We decided to re-launch THE WORKS range so that we could provide trade only, high quality and reliable products from a recognised technical sealant brand. THE WORKS PRO is our best ever multi-use construction sealant and adhesive that can seal, fill, and bond virtually any surface, wet or dry – inside or out. The product is available in a ‘whiter’ white and an improved clear formulation that can be over-painted. Fast curing, it achieves results that last.

This high grab construction adhesive, offers instant grab and bond. It can be used on virtually any wet or dry surface, and in both interior and exterior applications. Due to its superior adhesion and fast curing, the formula is ideal for projects that require a strong lasting bond.

Both products benefit from nonstaining properties making them ideal for plumbing jobs like sealing around a bath or shower. With a fast cure time, they ensure that work can be completed on the same day, minimising the need to return to finish the job. We want to ensure trade professionals not only have a product that is high grade, but also time

PB

66 SEPTEMBER 2020 PROFESSIONAL BUILDER

efficient. MS Polymers in general, offer excellent workability and strong final bond strength as well as a high UV resistance and no shrinkage over time, making them ideal for a wide variety of applications.

What sets the latest formulations apart from other multi-use sealants and adhesives?

AC THE WORKS PRO builds on the existing range, with a fast skin-over and a tack-free time of one hour. It has excellent adhesion to a wide variety of surfaces, wet or dry, with resistance to mould. It is also over-paintable and has a cure rate of 3mm per 24 hours at 23°C 50 per cent Relative Humidity.

THE WORKS PRO X provides an open time of approximately 10 minutes and a bond that can be adjusted up to 5 minutes after application, it gives 50 per cent more grab than traditional alternatives, meaning there is no need for additional fixings on most applications.

When it comes to providing trade professionals with high quality adhesives and sealants that offer lasting performance, it’s all about workability, fast curing times and a long-lasting finish.

These new products have been developed to provide all of that. We feel strongly that they are products the trade can trust in – coming from the brand that originally developed the technology.

PB

FOR MORE INFORMATION ON THE WORKS PRO AND THE WORKS PRO X, VISIT WWW.RDR.LINK/BS064

PB page grid_Layout 1 02/04/2020 09:52 Page 1

068_PB_SEPT20_Layout 1 04/08/2020 12:52 Page 68

BUILDING BOARDS

IN ALL ITS MAGnificence!

Professional Builder puts the questions to Magply’s Gordon Pirret to find out why the construction industry should become much more acquainted with magnesium oxide!

Magply? It’s a relatively new one on us but the name would suggest an amalgamation of two important elements to form a building board? Tell us more.

GP Your assumptions are not misplaced.

Magnesium oxide, commonly known as magnesia, has a long history as a construction material. In fact, magnesia has been identified in the Great Wall of

PB

China, along with many other ancient landmarks. Its use has continued throughout the centuries, with the base of New York’s Brooklyn Bridge, and the pedestal of the Statue of Liberty made from locally mined Rosendale natural cement, a mixture of calcium oxide and magnesia cement. China is home to some of the largest deposits of magnesium oxide in the world, and they have

developed a highly automated, rigorously quality controlled manufacturing process to turn it in to an incredibly versatile board for a multitude of construction projects.

So why the current resurgence in interest now?

GP There are a number of reasons behind this, not least the findings of a detailed report, Magnesium Oxide Board Market – global analysis, size share growth trends and forecast 2018 – 2026 from Transparency Market Research, where the boards are described as being environmentally friendly, and produced without large amounts of fossil fuels or releasing substantial amounts of carbon dioxide into the atmosphere.

PB

So what practical advantages do they offer the contractor over traditional alternatives to gypsum based drywall, cementitious boards and plywood?

GP The mineral composition of the boards ensures impressive strength and

PB

I

68 SEPTEMBER 2020 PROFESSIONAL BUILDER

068_PB_SEPT20_Layout 1 04/08/2020 12:52 Page 69

durability, but, perhaps most significantly, greater fire resistance, which is obviously very topical right now. Manufactured from naturally occurring materials, which are combined with alkaline resistant glass fibres for strength and integrity, the Magply boards have a fire classification of EN 13501 Euroclass A1, which means they can be used as passive fire protection panels for timber frame, steel frame, rainscreen cladding, SIP panels, spandrel panels and modular builds.

The actual production process ensures a low chlorine content, enhancing both stability and durability, whilst the products can also boast superior frost, moisture and mould protection, along with some important sound insulation qualities.

Available generally in 9 and 12mm thicknesses, the boards are easy to cut and fix on site for use as a high performance dry lining panel, and have been tested for use with a variety of render systems to form external facades for domestic and commercial properties, which utilise hybrid frame structures. They

can also be used in roofing, and increasingly as a highly efficient tile backer.

It’s a simple one board fits all approach.

What’s the route to market in the UK, and where can builders source the boards?

GP Magply is a brand of IPP Building Products, which can offer a range of

PB

innovative sustainable and environmentally friendly products for construction, such as Alumaflex, thermal multi foil insulation and Black Mountain Natural Insulation. Once imported we hold significant stocks on the ground, and work with leading distributors to get them into key builders’ merchants nationwide,where we have a full programme of demonstration days. The industry is naturally conservative when it comes to new products, but more and more are coming to understand that Magply plugs a gap in the market for a high performance multi board that performs better than gypsum plasterboard in a wide range of projects. Other fire protection boards are, of course, available, but we are confident that ours are the most competitively priced.

PB

The Magply secret has been well and truly told!

FOR FURTHER INFORMATION ON MAGPLY VISIT WWW.RDR.LINK/BS065

070_PB_SEPT20_Layout 1 04/08/2020 12:53 Page 70

TOOLS & EQUIPMENT RUBBER MALLET

Available in 12oz and 18oz sizes, the Estwing Deadhead Rubber Mallet is fitted with a hickory handle. A grey rubber head eliminates damage and marring to the striking surface, whilst the manufacturer’s deadhead technology reduces bounce and enhances control. It is ideal for use in woodworking, tiling, laminate flooring, plasterboard, sheet metalwork, window fitting and any other striking task where surfaces can be marked or damaged.

GET MORE DETAILS AT: WWW.RDR.LINK/BS066

BATTERY PROMOTION

To celebrate the launch of its new XGT 40V Max battery platform, Makita UK, is offering the opportunity to claim a FREE 40V battery (2.5Ah) with selected XGT product purchases via a brand new redemption scheme. The battery promotion entitles end users to claim a free 40V 2.5Ah lithiumion battery with purchases of selected products within Makita’s new cordless 40V XGT range. The selected products must include the suffix ‘GD101’, ‘GD102’, or ‘GD103’ and be purchased before the 30th September 2020.

GET MORE DETAILS AT: WWW.RDR.LINK/BS067

VACUUM LIFTER

The GRABO is a hand-held battery powered vacuum lifter, with a 170kg capacity, that enables the handling of multiple materials from stone and paving to composites and glass.

Its twin seal design works on uneven surfaces, such as riven paving or tiles, textured façades and even on surfaces that are dusty or wet. Because its vacuum motor can run constantly to compensate for air loss, it even works on porous materials, such as plasterboard, plywood and many types of porous stone.

CUTTING-IN BRUSH

Boasting good paint pick up and spreading rate, the Hamilton Performance 2” Cutting-in brush, with its angled profile, is designed for precision cutting in, and with hard-to-reach architraving, where awkward angles are often found. Ideal for water-based paints, the brush is made using a high quality synthetic filament giving good paint application. With a short, quality wooden handle for comfortable use, it features a rust resistant stainless-steel ferrule, is easy clean and vapour box compatible.

GET MORE DETAILS AT: WWW.RDR.LINK/BS068

ONE-HANDED CLAMPS

In addition to the EHZ, EZS and Duo range of one-handed clamps from Bessey, the new EZ series provides a further four sizes and a total of ten variants. With opening widths from 110mm to 900mm, spreading widths from 80mm to 1,090mm and clamping forces from 200 to 2,700N, the latest tools cover a wider range of applications. The twocomponent plastic handle with pump lever behind the rail allows safe access from both directions and, thanks to the release lever integrated in the handle, the sliding arm can be quickly adjusted and the clamp released.

GET MORE DETAILS AT: WWW.RDR.LINK/BS070

I

70 SEPTEMBER 2020 PROFESSIONAL BUILDER

GET MORE DETAILS AT: WWW.RDR.LINK/BS069

DIAMOND CORE DRILL

The first battery-powered solution of its kind, the Milwaukee MX Fuel 150mm diamond core drill can be used without a nearby power source, and without the hassle of extension cords and tripping circuit breakers. Part of the new MX Fuel Equipment System, the tool has the power to core up to 152mm holes in reinforced concrete. A patented ratcheting clutch and AUTOSTOP technology delivers a safer coring experience, providing the user with greater control and reduced kick back.

GET MORE DETAILS AT: WWW.RDR.LINK/BS071

LIFTING SYSTEM

If you need to access windows and façades for repair, replacement and cleaning, then consider PORTA BASE from REID Lifting. The device offers a temporary anchor point for lifting and lowering goods and people from rooftops, in confined spaces and in difficult to access locations. Available as both a H-base and a counterbalance system, goods lifting capacity is 600kg, personnel lifting is 300kg, and reach is 800mm for the H-base and 1,200mm for the counterbalance.

GET MORE DETAILS AT: WWW.RDR.LINK/BS072

071_PB_SEPT20_Layout 1 04/08/2020 12:53 Page 71

TOOLS & EQUIPMENT

No.10 in the series

POWER UP! In the latest instalment of our Tech Talk series, Kevin Brannigan, Marketing Manager at Makita, introduces the company’s new 40V MAX XGT battery platform.

Offering greater maneuverability, easier storage, lighter weight and zero emissions, cordless tools have a number of advantages. However, some construction tasks, particularly those within industrial operations require extremely high levels of power and torque. Fortunately, our new, innovative XGT battery, charger and brushless motor technology is a significant milestone for cordless construction, offering output that can rival the high power of corded tools and even some petrol engine machines.

What makes this different?

a system that can be developed even further in the future.

A 2.5Ah XGT battery can charge in as little as 28 minutes and a 4.0Ah XGT battery in 45 minutes. For flexibility onsite, all XGT systems are supported by a charging unit that is also compatible with LXT batteries – enabled by the addition of an ADP10 adaptor, that allows 18V LXT batteries to be charged even quicker than before.

The new 40V MAX XGT is the most powerful battery platform in the range and is a stand-alone system with its own range of tools, batteries and chargers. Rather than opting for higher voltages or multiBuilt to withstand voltages for power, tough jobs investment has been The system has been made into research and engineered to development to ensure levels of achieve the required durability and power and runtimes for robustness that can high drain applications, withstand the by combining demands of highinnovative tool design Makita is currently offering a FREE power applications, and extremely high 40V XGT battery on purchases of and tough battery output. As such, selected XGT models until 30th environmental the dedicated 40V conditions. The September 2020. for more MAX XGT system offers information on how to claim, visit: battery is housed in optimum power and shock absorbing WWW.RDR.LINK/BS073 balanced run times that material and a in turn, offers a genuine solution for heavy-duty outer casing that is dust, high-demand industrial users, as well as splash and shower resistant. As well as

being extremely durable, the XGT battery is exceptionally light and compact in order to minimise additional weight when used with our range of XGT power tools, so that professionals can work for longer, with more comfort and less fatigue.

Optimised life

Finally, akin to our innovative LXT battery platform, the XGT solution also features Makita’s unique smart system.

The system enables the XGT battery to digitally communicate with the tool, as well as enabling the tool to digitally communicate with the battery. This feature provides enhanced levels of protection for both the tool and the battery to reduce common issues, such as over discharge and overheating, to help prolong the life of the components as well as providing the foundation to adapt to even higher technology advances in the future.

The new 40V XGT platform already has a number of products suited to high demand applications, including: an impact driver, rotary and combi-hammer drills, angle grinders, combination hammers, circular and reciprocating saws, and there’s even a fan for the summer months.

Moving forward, our plan is to roll out many new LXT and XGT products that continue to make working easier.

FOR MORE INFORMATION ABOUT THE NEW XGT SYSTEM VISIT: WWW.RDR.LINK/BS074

I

PROFESSIONAL BUILDER SEPTEMBER 2020 71

072_PB_SEPT20_Layout 1 04/08/2020 12:54 Page 72

TOOLS & EQUIPMENT

This autumn will see a number of new arrivals from Festool, and over the next two issues Professional Builder’s Lee Jones examines some of the highlights.

ALL TOOLED UP When you look at the latest developments from Festool what is immediately apparent is the extent to which this German manufacturer has analysed just how the trades are already using its tools. These are no solutions in search of a problem but the result of the careful scrutinising of a particular application, and finding an answer that is not only easier to use, but ultimately provides a better finish.

A case in point is a new concept in sanding. A good surface finish on the edges of worktops is more often than not achieved with a time-consuming handheld block, whilst using a random or orbital sander can run the risk of rounding the angles. The Festool solution is the ES-ETS 125/ES-ETSC 125 edge sander, where you can run the tool along the top of the workpiece whilst sanding the edge.

Whether it is an inner corner or external curve, painted or untreated, the tool can deliver the required result, whilst the unit can be set to run along angles from 43 to 92º, and locked in position.

To complement new developments like its edge sander, Festool prides itself on providing a complete system, including storage and transportation, and its Systainer3, developed in partnership with bott and TANOS, is the latest embodiment of that ambition. These sturdy tool containers will slide effortlessly in and out of the bott vario 3 vehicle equipment range, stack and lock together on site for space saving, or sit on any of Festool’s dust extractors. Variations on the theme include the XXL, with a 64 litre capacity, and the Organizer, with its transparent lid and compartments for small parts, whilst

I

72 SEPTEMBER 2020 PROFESSIONAL BUILDER

more and more tools are being made available within a Systainer3.

This year the Systainer concept moves on still further with Toprock taking a bow.

Here, a Bluetooth loud speaker has been incorporated into the lid, providing high sound quality in a durable package, whilst connecting two Toprocks to your smartphone via Bluetooth will allow for stereo sound. There’s an integrated battery that gives 10 hours of play at medium volume, and there’s a USB point for charging smartphones and other devices.

072_PB_SEPT20_Layout 1 04/08/2020 12:54 Page 73

Tibby Singh — www.TibbySingh.com Earlier this year, Festool’s Spring launches included an entry level dust extractor in the shape of the Cleantec CT15, the weight saving Li-HighPower battery pack, and the TID 18 Impact Driver. Professional Builder’s Tibby Singh Chodha has already reviewed this powerful 180Nm, 4.0 amp hr lithium-ion cordless impact driver and you can read that review by making use of our digital reader enquiry service and entering the link into your browser www.rdr.link/BS075

By securing tools in your van whilst driving the Systainer can mitigate the effects of accidents, and damage in transit, but one tool that provides a rather more dramatic demonstration of advances in safety is the TKS 80 bench-mounted circular saw with SawStop technology. It works by detecting the moisture inherent in the human body and protects errant fingers in the process. If a blade threatens to come into contact with a user’s skin a cartridge works together with a spring to push an aluminium block into the saw blade. That saw blade will then stop in less than five milliseconds, disappearing into the machine bench and out of the hazard area. To get started again it’s a simple matter of removing and replacing the old blade and cartridge.

If you’re working on larger panels on site you might be well be using trestles, or some other improvised support. Launched

in April of this year, the new STM 1800 saw table and work bench is a purposebuilt solution. It weighs in at just 34kg, can easily be assembled and transported by one person, whilst its mobility is enhanced with rollers and a brake. Extensions can provide an even wider surface for bigger board material, with a fully assembled contact surface of 1,800 x 1,800mm. That means builders can machine material without additional assistance and, in conjunction with a guide rail and saw, this folding table can easily be transformed into a mobile panel saw, with the workpiece held securely in place at all times. Indeed, thanks the table’s tilting function, sheet material up to 3,100 x 2,150mm can be held and machined by a single person. The working height can be adjusted, it takes up very little space when folded down, and can be assembled large or small as required.

Festool knows its customer very well and they recognise that, whilst the trades might not be apt to read instruction manuals, they invariably have a long list of questions. A new user friendly How To app seeks to answer these through videos and other resources. www.rdr.link/BS076

FOR FURTHER INFORMATION ON ANY OF THE FESTOOL PRODUCTS MENTIONED IN THIS FEATURE USE THE APPROPRIATE READER ENQUIRY NUMBER:ES-ETS 125/ES-ETSC 125 EDGE SANDER WWW.RDR.LINK/BS077 SYSTAINER3 WWW.RDR.LINK/BS078 TOPROCK – BLUETOOTH LOUD SPEAKER WWW.RDR.LINK/BS079 TKS 80 BENCH-MOUNTED CIRCULAR SAW WITH SAWSTOP TECHNOLOGY WWW.RDR.LINK/BS080 STM 1800 SAW TABLE AND WORK BENCH WWW.RDR.LINK/BS081

I

PROFESSIONAL BUILDER SEPTEMBER 2020 73

074_PB_SEPT20_Layout 1 04/08/2020 12:55 Page 74

TOOLS & EQUIPMENT

THE ‘DUAL’ IN THE CROWN “The ethos of the company has always been to develop products that are distinct from what already exists in the marketplace,” declares Pete Sartain, National Sales Manager, Mirka UK. “That’s why our R&D department make a real effort to talk to end users, and the answer is invariably that they want equipment that saves them time.”

Innovation is a much over-used phrase in the building industry, but it is this Finnish manufacturer’s culture which has carved out a unique space for its solutions, as Pete explains: “The LEROS wall and ceiling sander proved a very successful launch nearly two years ago now, for instance, but tradespeople were asking for a site-work compatible 110V option to go alongside the existing 230V machine.”

Rather than simply introduce an entirely new tool, with builders then compelled to buy two separate machines, Mirka has introduced a Dual Voltage LEROS. There’s no need for the additional purchase of a 110 and 230V, or the inconvenience of carrying a heavy transformer around in the van, because all that needs to be changed to switch between the two voltages is the

I

Pete Sartain, National Sales Manager, Mirka UK reveals some of the latest developments from the sanding and abrasives expert. Professional Builder’s Lee Jones finds out more. lead. It’s technology that can easily be extended to other sanders in the range, and represents a significant departure from what other power tool manufacturers are developing.

Versatile Machine

The LEROS already benefits from a brushless motor and a sanding head with 180-degree flexibility. Add to that a 5mm

74 SEPTEMBER 2020 PROFESSIONAL BUILDER

random orbital movement, a light weight of 3.5kg – together with dust-free sanding – and you have a very versatile machine, which can now be used on site or in residential settings.

Connectivity is now a part of our everyday lives, with the internet of things ensuring that we have access to a wealth of data on a whole range of equipment in use – and our power tools are no

074_PB_SEPT20_Layout 1 04/08/2020 12:55 Page 75

different. “We will move towards incorporating our Bluetooth connectivity throughout the Mirka portfolio of tools over time,” reveals Pete, “While the 110V sanders do not currently have Bluetooth connectivity, certainly most of the new ones already do. By downloading the My Mirka app, you can register the warranty, and interrogate the performance of the tool. The technology will soon be available to integrate with a dashboard, which will allow companies to monitor all of the tools they own, including service intervals, and the health of the equipment,

whilst a Hand Arm Vibration Syndrome (HAVS) real-time monitor can register your daily exposure. Incorporating digital technology to our tools opens up a wide range of opportunities to provide our customers with the solutions to challenges that previously were a stumbling block.”

It was 20 years ago that a new patented technology put Mirka at the forefront of dust-free sanding. By developing an abrasive that featured a net structure, instead of a conventional paper backing, the manufacturer was able to introduce extremely efficient on-tool dust removal.

As a result, the Abranet abrasive ensures a sanding particle is never more than 0.5mm from a dust extraction hole.

This means that sanding grains are able to retain their cutting power and the resulting dust is safely removed. The material is highly resistant to dust pills and clogging, and is easily cleared to ensure optimal use out of every abrasive.

There are now many versions of the original Abranet, with new ones being continually developed and patented, whilst

2019 also saw the emergence of two new products in that proud tradition – Iridium and Novastar. Heralding the next generation of abrasives, both products feature a ceramic and aluminium oxide coating on flexible paper that prevents clogging and reduces pilling. That means it can repel dust, increasing its lifetime, whilst at the same time accommodating multihole patterns for optimal dust extraction.

It is Mirka’s commitment to dustextraction that has made it one of the pioneers in tackling this significant health and safety issue. That’s why it is busy researching cordless products that will be able to achieve the same industry leading extraction performance as its corded solutions. “The Mirka mindset is always to ask ourselves what the customer wants from a sander,” concludes Pete Sartain.

“What that amounts to is getting the job done quickly and safely, but with the best possible finish, and that is very much the focus of our product development.”

FOR FURTHER INFORMATION ON THE RANGE OF SOLUTIONS FROM MIRKA VISIT WWW.RDR.LINK/BS082

I

PROFESSIONAL BUILDER SEPTEMBER 2020 75

076_PB_SEPT20_Layout 1 04/08/2020 12:55 Page 76

WORKWEAR

T H G I R E H T ON FOOTING

Timberland is a brand that doesn’t need an introduction on or off site, but some may wonder what the difference between Timberland and Timberland PRO is. Although there are many similarities, the main difference is that the ‘PRO’ range is designed for work sites, and their work boots will, of course, feature a safety toe cap. This makes sense, especially given that Timberland were originally designed as work boots, but then began offering the

I

Tibby Singh Chodha puts his best foot forward with the Timberland PRO Hypercharge work boot

everyday casual wear that became so popular, and most people are familiar with. This makes me more interested to see if they can still achieve their primary purpose, and even more excited to review the new Timberland PRO Hypercharge boots.

The first thing I noticed about the boots was their similarity to hiking boots.

When I think of hiking it reminds me of constantly walking on different terrain.

76 SEPTEMBER 2020 PROFESSIONAL BUILDER

This is very much like a building site, as you’re continually on your feet on various surfaces. I can also see why they became fashion boots, but it’s OK looking the part but I wanted to see if they took me to new heights on site.

As previously stated they obviously have protective toe caps, made from a composite material. This is becoming common in various boots as it makes them light in weight, so it was something I was expecting. What I wasn’t expecting was the shoe to contain ReBOTL material, which contains at least 50 per cent recycled discarded plastic bottles. This is a great innovation and I love how

076_PB_SEPT20_Layout 1 04/08/2020 12:55 Page 77

Tibby Singh — www.TibbySingh.com

Timberland PRO care about the planet we are walking on.

It’s actually a pleasure walking in these boots; and they will even take rough terrain in their stride. This is down to a clever sole that’s about 1in. thick and made from various layers. The grip on the rubber outsole resembles a tyre, and even has an independent suspension network, which makes it very comfortable in any environment.

Being oil and slip resistant and being nonmarking, scores more marks.

On top of this is the kind of EVA midsole which is used in sports shoes, as well as a non-metallic puncture-resistant plate, which protects your feet from any sharp objects penetrating through the sole, with a contoured shock-diffusion plate protecting you from any impact.

Sole Saving

Finally, the insole your feet rest on has an Anti-Fatigue Technology design. I never get tired of removing the insoles of shoes to see the technology used. It is the first time I have ever seen this design, which is an exclusive geometric cone support. It consists of a honeycomb structure, which has the effect of using less material, whilst making it strong yet still flexible.

Shoes are generally associated with bad smells, but Timberland PRO have gone a step further, and incorporated an Antimicrobial Odour Control treatment to prevent and control odours. Another refreshing design is the Stable Stride Technology to reduce the chances of

your ankle rolling.

I also had the pleasure of trying out some other Timberland PRO garments, such as the Interax Work Holster Trousers, which, thanks to the seamless four-way stretch gusset, are very comfortable, making them ideal for a range of motion. Timberland PRO’s Honcho Sport Sweatshirt felt incredible and, thanks to its distinctive orange colour, certainly looked the part. The stand out feature on this is that it has rain repel technology, which helps keep you dry. Finally, to wrap it up, I slipped into the Timberland PRO Dry Shift Max Jacket.

I can tell you they have taken recycling to the max as it has a 100 per cent recycled polyester shell and lining. The materials feature breathable and waterproof properties too.

I am now the proud owner of the Timberland PRO garments and shoes. It may sound like I’ve Hyped these NEW Timberland Pro Hypercharge Boots up but when you see the detail and effort they’ve put into producing this level of quality, you know you’ve taken a step in the right direction.

Hypercharge Leather Boot – Features at a glance ●

Independent Suspension Network Technology: a multi-density outsole with comfort lugs that adapt to varying worksite conditions, providing an additional layer of cushioning, comfort and stability.

●

Stable Stride Technology: designed to provide lateral stability on slanted and uneven surfaces to help reduce ankle rolling, slippage and injury.

●

Carbon Shield Technology: featured in the Hypercharge’s safety toe, this adds strength and subtracts weight with the help of nano technology, providing a better fit, lighter overall weight and unmatched protection.

●

Available in Brown, plus Black/Orange and Black/Teal.

FOR FURTHER INFORMATION ON TIMBERLAND PRO VISIT WWW.RDR.LINK/BS083

I

PROFESSIONAL BUILDER SEPTEMBER 2020 77

078_PB_SEPT20_Layout 1 04/08/2020 12:56 Page 78

builders’ vehicles

Away in a ranger nlike its predecessor, which was a Mazda spin-off, the latest Ranger was conceived

by Ford Australia and launched in the UK back in 2011. It featured an all-new ladder chassis, the choice of six-speed manual and automatic transmissions and competitive towing and payload limits. All models get a large load bed, with the choice of single, super or double cab body styles. Single cab models will carry the most – a maximum of 1,269kg – while double cabs will take around 1,100kg.

U

Which engine is best?

At its launch, the third-generation Ranger was fitted with a choice of two diesel engines, with a choice of power outputs.

The entry-level engine was the 2.2-litre TDCI turbodiesel (with 135PS or 150PS) while the smart money went on the powerful 3.2-litre engine with 200PS. The 3.2 is a real beast of an engine and comes packed with mountains of low gear pull, which makes it perfect for towing.

We would recommend choosing this unit over all others, when buying used.

That said, if you are buying a nearly new model, you might want to consider the Ranger with the newer 2.0-litre ‘EcoBlue’ turbodiesel. In most forms it will generate 170PS, and promises lower fuel costs and tailpipe emissions than the larger – and thirstier – 3.2-litre engine.

All versions of the Ranger are good to drive, comfortable and capable of hauling huge loads. But what should you look out for when buying used? Dan Powell, from Honest John Vans, explains how to find a good one on the used market.

How much should I pay?

Rangers in the sub-£10,000 bracket are typically early single-cab models, in base trim that have been bought to work and wear the mileages to prove that. Don’t be frightened of them, as big mileages from business vehicles tends to suggest they’ve been looked after, just be sure to make sure it comes with a wad of receipts and service history to demonstrate that it’s been looked after properly.

At around £14,000 there’s a good number of these lifestyle Rangers, mixed in with a lot of white, clearly businessowned vehicles, the choice encompassing everything from the entry-level trims right up to the top level ones. The £15,000 – £18,000 range features rich-pickings for a Ranger buyer. Here, you can really afford to shop around, with everything available in this price bracket. You’ll get a prefacelift two-year old Ranger with under 20,000 miles here, or post-facelift version with higher miles.

If you want the bigger engine then spend £20,000 or more, with this price point seeing a glut of choice of mint 3.2litre examples, most coming with fullyloaded specifications. Above that and

you’re into the nearly new, ex-demo stock, where you can bargain hard from the dealers you’ll likely be buying them from.

What should I check when buying?

According to the service schedule, the Ranger should visit a local Ford dealer or independent garage once a year or 20,000 miles – whichever comes sooner.

However, for smoother running, Honest John Vans recommends having the oil and filter changed every 12,000 miles or 12 months to ensure the oil does not lose its lubricity and cause unnecessary wear and tear. The Ranger comes with a timing chain on the 2.2 and the 3.2-litre engines and these should last the life of the vehicle if the oil has been changed regularly.

A major service will cost in the region of £240, with an interim service being roughly £150. New front brake pads will cost about £140 fitted, while a new clutch will be just shy of £700.

FOR FURTHER INFORMATION ON HONEST JOHN VANS VISIT WWW.RDR.LINK/BS084

FOR FURTHER INFORMATION ON THE FORD RANGER VISIT WWW.RDR.LINK/BS085

For more van advice visit: www.honestjohn.co.uk/vans or type “Honest John Vans” into your online search engine.

I

78 SEPTEMBER 2020 PROFESSIONAL BUILDER

079_PB_APR20_Layout 1 04/08/2020 12:57 Page 79

builders’ vehicles 씱

Things are picking up!

In the previous issue we reported that it wasn’t only us that was suffering from lockdown blues. Our lovely shiny new Atlantic Blue top of the range SsangYong Musso 4x4 Rhino pick-up, which was delivered just hours before the world stopped revolving, had been unable to venture anywhere more exciting than the local shops. Well, we are happy to report that things have moved on considerably since then with – wait for it – an outing to the local recycling depot (approved commercial vehicle documentation in hand) and a day trip to our nearest seaside resort…

Southend.

o proper hard graft yet then for this impressive 1,140 kg payload workhouse, but then again you know what they say about all work and no play, and this is a vehicle which is just as comfortable hanging out in the builders’ merchant’s yard as with the surfer and mountain biking dudes. One of the reasons for the significant increase in sales of pick-ups in the UK in recent years, and the big manufacturers looking to add a version to their various LCV platforms, has been this growing emphasis on getting a work/lifestyle balance just right. Here is a vehicle with sufficient load space to carry the amount of materials and tools required to earn its

N

Wish you were here!

SOUTHEND ON SEA

keep during a normal busy working week, but also has the car-like driving experience, and inside cab comfort and load capacity, to explore a multitude of leisure activities at the weekend.

In this respect you have to say that the Musso fits the bill perfectly, with plenty of power, thanks to a 2.2 litre turbo diesel powertrain, which can comfortably tow a 3.5 tonne trailer, and has the longest load bed in the market. There might be more economical ways of escaping to the coast or mountains, because robustly constructed pick-ups are not particularly

known for their fuel conservation, but there will be no complaints from the driver or passengers on long hauls, because the level of inside cab refinements are right up there with the mid-range saloon car and hatchback offerings.

As lockdown restrictions ease, and with a trip – appropriately enough – to the Zoo and, of course, a nice bistro pub planned for the coming weeks, our long-term test Musso Rhino can enjoy its own personal staycation with us as long as it wants!

For those who require slightly less space and refinement the new Musso range also includes the Saracen, which has an entry level at an impressive £22,000 plus VAT and the Rebel at £24.500 plus VAT. FOR FURTHER INFORMATION ON THE SSANGYONG VISIT: WWW.RDR.LINK/BS088

I

PROFESSIONAL BUILDER SEPTEMBER 2020 79

080_PB_SEPT20_Layout 1 04/08/2020 12:57 Page 80

ADE’S TOP WINDOW & DOOR TIPS

No. 18

! ’ L L A ‘C S ’ N A I R D A AN OPEN AND SHUT CASE

Adrian Barraclough runs Quickslide, one of Britain’s leading window & door manufacturers.

Window and doors sell houses, argues Quickslide’s Ade Windows and doors are a key detail, and far more than simply a building element to let light in and keep the rain out.

These days the window and door sector of the home improvement industry sells these products as furnishing and styling elements, with replacements for front doors and even windows encouraged as part of a home makeover. Where once replacing windows and doors was largely a stress purchase, the vast majority of existing British homes have had double glazing installed at some point – as many as an estimated 90 per cent of our housing stock.

The simple truth is that the replacement window and door industry is thriving, and especially so as we come back from lockdown.

Homeowners are now presented with a huge choice of window and door styles, systems, colours, materials, hardware, security options; then add in garden doors, such as the huge choice of clever bi-folding doors, superb sliders and again, in a bewildering range of colours, systems and materials.

Do your research Choose styles appropriate to the home, of course, especially when building upmarket properties. But even mid to low end homes can have their kerb appeal dramatically improved through the inclusion of flush sash frames in gentle colours, for example, maybe even differing from their neighbour .Coupled with colour matched front doors, what an impact these could have on an otherwise bland neighbourhood!

Performance is critical too, especially in a world that is increasingly aware of its environmental responsibilities.

Building Regs haven’t been upgraded for years so why not go above and beyond and install windows that comfortably beat the standards – and promote the facts, even including Energy Efficiency ‘rainbow’ charts that are just the same as those available on fridges and washing machines.

And, as a really effective selling point, offer a choice of windows and doors, and especially garden doors – and even conservatories – when selling off plan!

Here are a few tips: If nothing else, get the front door right.

Modern composite front doors look great, perform well in terms of security and weather performance and are available in a countless number of colours and finishes. Bold colours really lift any development.

Architects love glass. And that is why huge windows and impressive entrances are key features on prestige buildings the world over. And even on a humble three bed detached, the effect pro rata can be just as dramatic.

For example, taller and wider windows and doors with narrower frame

Arch tops are a nice touch in an appropriate setting.

I

80 SEPTEMBER 2020 PROFESSIONAL BUILDER

An emphasis on the windows and doors installed in this new build helped to create an authentic period feel.

sightlines maximise the glazing area to allow more light in and provide unobstructed views out – simple really.

Styles with sleek, modern details will subtly influence the overall ‘feel’ of the property.

Garden doors, including bi-folds and sliders, are a real closer for new homes. They look great and the buyer figures that it’s one less thing they will need to install when they move in.

Use colour and shapes to distinguish homes from each other thus infusing even larger developments with individual character throughout.

Aluminium, PVCu or timber? There is very real choice these days with both aluminium and timber having made a comeback. But PVCu still generally offers great value for money and there are some superb styles and finishes around that look anything but plastic.

In the show homes, include literature and displays that promote the windows and doors, with colour swatches, brochures and even covering such details as security…buyers will love attention to detail such as anti-bump locks (go on, look it up – your buyers will have) for example. Again, tap up your window and door manufacturer for sales materials – they will be delighted to step up and support you.

FOR FURTHER INFORMATION ON QUICKSLIDE VISIT: WWW.RDR.LINK/BS086

081_PB_SEPT20_Layout 1 04/08/2020 12:59 Page 81

GOOD HEALTH NO.15 CHRONIC KIDNEY DISEASE

Let’s talk about

KIDNEY DISEASE...

IN PART TWO OF OUR FOCUS ON THE KIDNEYS, WE LOOK AT THE DISEASES THAT CAN AFFECT THESE VITAL ORGANS

kidney disease (an inherited genetic condition) In the same theme as our last health article and long term use of anti-inflammatory about the kidneys, this month we move on to medicines like ibuprofen. learning a little bit more about chronic kidney If you have CKD stage 3, your kidney disease (CKD). I think this is an important topic function will be monitored. Often, the kidneys to cover because, as a GP, I find that my will stay working at this level for a long time and patients may or may not have either been told you won’t have any symptoms. It is important to they have it or understand what it means. GPs know this as for CKD stages 3, 4 and 5 your deal with a lot of blood results for lots of doctor may need to change doses of different conditions, and we are always looking medications you are on, or some medications at kidney function and monitoring it for any might not be suitable for you to have at all. This changes in patients who may be at risk of is because the body uses the kidneys to get rid developing CKD. CKD is a common condition, of medication from the system. If they don’t and it can happen naturally as you get older work as well, your body cannot get rid of the and affect anyone. However, it is more common waste products. in people with south Asian origins, or who are At CKD stages 4 and 5, the kidney function black. Having CKD increases your risk of has reduced a lot. At this stage, your GP might developing cardiovascular disease (including refer you to the kidney specialists. There may heart attacks and stroke). still be no symptoms, however if the CKD Chronic kidney disease is measured by advances symptoms such as tiredness, feeling checking how well the kidneys are working sick, swelling in your feet, ankles or hands, over the long term. This is normally done using feeling short of breath and passing blood in the blood and urine tests over time. There are urine may develop. If you notice these different levels of CKD and they are split into symptoms, it is important you contact your GP. different stages (1-5) based on the test results.

According to Kidney Care UK, 10 per cent of Stages 1 and 2 are considered normal kidney people with CKD will reach a stage known as function. At stage 3, we start to recognise that renal failure. At this stage, the kidneys no someone has CKD; this is important to detect longer work well enough to keep you alive and so steps can be taken to find a reason for the healthy. This is when treatments kidneys to be working less well and Chronic Kidney Disease (CKD) can increase your risk such as dialysis or kidney try to fix it. may be considered by CKD can have many causes. As I of developing cardoivascular disease (including heart transplants the kidney specialists. previously mentioned, getting older attacks and stroke). It can be caused by high blood Most people with CKD will never may simply be one of them! reach a stage where they need to However, the common conditions pressure, cholestorel and diabetes. see a specialist doctor. CKD can be we mention all the time are most managed by the GP with regular likely to cause problems with the reviews and with focus on controlling blood pressure, kidneys: high blood pressure, diabetes and raised cholesterol. cholesterol, and diabetes to stop it getting worse.

This is another reason why controlling these conditions if you have them is so important and is how CKD can be managed.

YOU CAN FIND MORE INFORMATION ABOUT CKD BY Other causes of CKD include, recurrent kidney infections, VISITING: WWW.RDR.LINK/BS087 inflammation of the kidney (called glomerulonephritis), polycystic

I

PROFESSIONAL BUILDER SEPTEMBER 2020 81

082_PB_SEPT20_Layout 1 04/08/2020 13:51 Page 82

wise howell

Advertisement index Actis .............................................................................................. (page 14) Akzo Nobel – Amstead Trade.............................................. (page 24)

“Give me a lever long enough, and

Akzo Nobel – Dulux Academy ............................................ (page 63)

I shall move the world”, said

Blakes Building Profiles Ltd .................................................. (page 58)

Archimedes, the Ancient Greek

Bond-it ........................................................................................ (page 26)

engineer and astronomer. What a fantastic visual image of the great power of the lever. To be fair, Archimedes did add, “If you give me somewhere to stand”. He knew that floating around in space armed with only a lever wouldn’t have done him much good!

The mechanical advantage of the lever is proportional to your distance from the fulcrum, relative to the distance from the fulcrum to the object to be moved. The fulcrum being the pointy thing that the lever rests on.

Archimedes actually said – “. . . a lever long enough, and a fulcrum on which to place it, and somewhere to stand”, but I was trying to keep my opening line snappy.

Anyway, if you want to lift a lump of concrete that weighs 200kg, and you’re on your own, all you need is a decent lever, like a pinch bar or scaffold tube, and a fulcrum, such as a lump of timber. And then if you position the lever so that the fulcrum is four times closer to the concrete than it is to you, you only have to apply a downward force on the other end of one-quarter of that – 50kg – in order to lift it. Magic.

As builders, we use leverage all the time, of course, without even thinking about it. Every time you use a claw hammer to pull a nail out, you’re using one of the most brilliantly designed levers ever invented. Using a spade to dig a hole? – that’s leverage for you.

Pincers, pliers and spanners use leverage, to exert a

powerful grip and/or turning force on things, that would be impossible without them. Again, we pick up these tools every day with hardly a thought about how clever they are.

These days, with science and technology low down the list of most schools’ priorities, children are more likely to think that the word leverage refers to something else. Such as using borrowed money for an investment, in the expectation that the profits made will be greater than the interest forked-out. Or what used to be known as “getting a mortgage”.

Having leverage is often also used to mean that you have a secret advantage over someone else in a negotiation. A bit like blackmail, in other words.

Archimedes is perhaps best known for getting in his bath and realising that the weight of the water displaced was equal to the weight of the body floating in it – known as Archimedes’ Principle. And for then allegedly shouting “Eureka!”, meaning “I’ve got it”.

Whatever, I’m sure Archimedes would have preferred us to be talking about levers in relation to building than to financial speculation.

Jeff Howell

E-mail Jeff via his website www.askjeff.co.uk

Buckbootz .................................................................................. (page 69) Build Aviator .............................................................................. (page 30) Building Adhesives Ltd/Dunlop............................................ (page 48) Dakea .......................................................................................... (page 42) Eclisse UK .................................................................................. (page 29) Ecotherm Insulation Ltd.......................................................... (page 33) Fast-Form Systems Ltd .......................................................... (page 53) Festool UK Ltd ........................................................ (inside front cover) Ford Motor Co Ltd .................................................................... (page 11) Grass Concrete Ltd.................................................................. (page 58) Installsure .................................................................................. (page 53) Long Rake Spar Co Ltd .......................................................... (page 64) Made for trade .......................................................................... (page 17) Made for trade .......................................................................... (page 19) Makita (UK) Ltd .......................................................................... (page 47) Marley Limited/Edgemere...................................................... (page 43) Mighton .............................................................................. (loose inserts) Norbord Europe Ltd ................................................................ (page 27) Permaroof (UK) Ltd .................................................................. (page 50) Peugeot Motor Company PLC.............................................. (page 23) Pnu-Point Ltd ............................................................................ (page 65) Quickslide .................................................................................... (page 5) REG Group Ltd/Beauxfort ...................................................... (page 60) Rocket Door Frames ...................................................... (pages 34, 35) Safeguard Europe Ltd ............................................................ (page 32) Sievin Jalkine OY .................................................................... (page 58) Simpson Strong Tie ................................................................ (page 57) Snickers ........................................................................................ (page 6) Snug Solutions Ltd .................................................................. (page 69) Stelrad Radiators...................................................................... (page 55) The Etex Group Ltd ................................................................ (page 40) Toolfair Exhibition ...................................................................... (page 4) Toolfair Exhibition .................................................. (inside back cover) TuffX Processed Glass Ltd .................................................... (page 51) Ubbink UK Ltd .......................................................................... (page 37) Wunda Group PLC .................................................................. (page 67)

I

82 SEPTEMBER 2020 PROFESSIONAL BUILDER

NEW PB TF MAG AD_Layout 1 31/07/2020 11:50 Page 1

PROFESSIONAL BUILDER

TOOLFAIR 2020

POWER TOOLS

•

HAND TOOLS

•

BUILDING EQUIPMENT

E AR K E C W BA

THE TRADESHOW BUILT FOR THE TRADE

All the latest tools, live demos, show specials – all under one roof!

NEXT SHOW Ricoh Arena, Coventry Thursday 26th & Friday 27th November 2020 SAFELY DOES IT An extensive risk assessment programme has been carried out to ensure Toolfair is a safe and well-ordered environment for all visitors and exhibitors. Enhanced measures include: l Non Touch Entry l Hand Sanitising Stations l Contactless Payments

l Visitor Flow Management l Trained Operations Teams l Regular Thorough Cleaning

Register for free at www.toolfair.info

j oi nt heconver s at i on