Skip to main content

Professional Builder November 2026

Page 1

001_PB_NOV26_Layout 1 08/10/2026 13:58 Page 1

FRE E TO

THE TRA DE

Professional BUILDING ■ PLASTERING ■ PLUMBING ■ ROOFING ■ CARPENTRY ■ PAINTING AND DECORATING ■ THE BUSINESS MAGAZINE FOR THE BUILDING INDUSTRY

NOVEMBER 2026

DRAINAGE, GUTTERING & WATER MANAGEMENT YOU’VE JUST ‘GUTTER’ HAVE IT

TOOLS & EQUIPMENT ALL THE GEAR AND PLENTY OF IDEAS TIBBY SINGH HAS EVERY ANGLE COVERED WITH THE FESTOOL PSC 500 CORDLESS PENDULUM JIGSAW


PB.PMM page and ad grid_Layout 1 04/08/2026 10:56 Page 3


003_PB_NOV26_Layout 1 08/10/2026 13:59 Page 1

contents NOVEMBER 2026 VOL. 48 NO10

@PB_mag

@probuilderonline

REGULARS 7 8 66 67

www.youtube.com/ProBuilderMag

pbweekly.co.uk

Editors’ viewpoint NEWS TRADE MEDIA Good Health

@probuildermag

Professional Builder, Regal House, Regal Way, Watford, Herts, WD24 4YF.

42

SPECIAL REPORTS

10 The FMB discusses cowboy builders BUSINESS SOLUTIONS

13 How to practically use AI on site 18 Your solution to getting paid on time

TOOLS & EQUIPMENT

42 Tibby Singh reviews Festool’s PSC 500 Cordless Pendulum Jigsaw 45 CF Construction puts Carhartt through its paces 48 How to get site lighting right 51 MILWAUKEE on swapping petrol for battery power 54 Evolution’s latest disc cutter range 56 Makita’s guide to looking after your power tools FLOORING

58 Capitalise on the flooring opportunity

20 COMPETITIONS

WETROOMS

20 FREE-FOR-ALL Giveaways

30

60 The case for modern waterproof wall panels

62

DRAINAGE, GUTTERING & WATER MANAGEMENT

22 Why drainage should be the first step of a landscaping project 25 Why bathroom installers are rethinking pipe specification 30 The growing need for quieter drainage 32 Keeping surface water

34 37 40 41

under control on driveways Planning for SuDS Wouldn’t using one supplier make life easier? Drainage for hard landscaping New Products

ROOFING

62 Five steps to ensure you’re meeting BS 5534 VEHICLES & PLANT

64 Here’s what the KGM Musso Rhino is doing right

I

PROFESSIONAL BUILDER NOVEMBER 2026 3


004_PB_NOV26_Layout 1 08/10/2026 13:59 Page 1

Professional BUILDING ■ PLASTERING ■ PLUMBING ■ ROOFING ■ CARPENTRY ■ PAINTING AND DECORATING ■

t s a c d Po

IF THEY ARE TALKING WE ARE LISTENING! Professional

Podcast

AND YOU CAN TOO, AS WE CATCH UP WITH SOME OF THE CONSTRUCTION INDUSTRY’S MOST INTERESTING AND KNOWLEDGEABLE CHARACTERS ON THE GROUND BREAKING PROFESSIONAL BUILDER PODCAST WITH LEE JONES AND EDWARD KELLY. LEARN A NEW BUSINESS SKILL OR FINE TUNE AN OLD ONE FROM THE GUYS AND GIRLS AT THE SHARP END, WHO HAVE BEEN THERE, DONE IT AND GOT THE PB T-SHIRT TO BOOT!

LISTEN NOW ON YOUR PODCAST PLATFORM OF CHOICE Listen on

Listen on

Listen on

Listen on

Google Podcasts

Apple Podcasts

Amazon Podcasts

Spotify Podcasts

OR CLICK HERE TO VISIT: WWW.RDR.LINK/BCF001


PB.PMM page and ad grid_Layout 1 06/10/2026 10:48 Page 3


PB.PMM page and ad grid_Layout 1 06/10/2026 10:49 Page 3


007_PB_NOV26_009_PB_FEB04 08/10/2026 15:45 Page 7

Total Average Net Distribution 88,342 July 2025 – December 2025

EDITOR LEE JONES EMAIL: ljones@hamerville.co.uk ASSISTANT EDITOR EDWARD KELLY EMAIL: ekelly@hamerville.co.uk GROUP ADVERTISEMENT MANAGER CRAIG JOWSEY TEL: 07900 248102 EMAIL: craig@hamerville.co.uk NORTHERN ADVERTISEMENT MANAGER IAN DUFF MOBILE: 07810 353525 EMAIL: probuilder@sky.com GRAPHIC DESIGNER DONNA BOOTH GROUP PRODUCTION MANAGER CAROL PADGETT DIGITAL MANAGER JASMINE SMITH EMAIL: jsmith@hamerville.co.uk DIGITAL ASSISTANT LYDIA MCFARLANE EMAIL: lmcfarlane@hamerville.co.uk DISTRIBUTION MANAGER KARL CLARK PRINTED BY WILLIAM GIBBONS & SONS LTD PUBLISHED BY HAMERVILLE MEDIA GROUP Regal House, Regal Way, Watford, Herts WD24 4YF Tel: (01923) 237799 Fax: (01923) 246901 Email: pb@hamerville.co.uk

Professional Builder is a business magazine for firms and individuals involved in all aspects of the building industry. It is available nationally – free to the trade through leading builders’ merchant outlets. © 2026 To be removed from this magazine’s circulation, please call 01923 237799 or email circulation@hamerville.co.uk. Subscriptions to Professional Builder are available at the following rates: UK: 1 year (11 issues) – £30.00 post paid Europe & Overseas: 1 year (11 issues) – £70.00 post paid Airmail: 1 year (11 issues) – £99.00 post paid

viewpoint BRIDGING THE ENERGY GAP to discussions around a National Retrofit Now that winter is upon us anxious Strategy. Whilst politician have been active attention amongst homeowners turns to in the new build arena with the likes of the energy bills. Indeed, it’s become such a Future Homes Standard, little that has preoccupation that it’s fuelling a surge in proven workable has been directed at the interest in energy efficiency measures, much trickier refurbishment sector. It is including loft insulation or solar panels. argued that a National Retrofit Strategy The majority of tradespeople now report would introduce real incentives for energy that they have been asked about efficiency measures as well as training undertaking this kind of work and, as the cost of living takes hold, the numbers are opportunities for the tradespeople tasked with undertaking the work. only set to increase. There is of course a much wider issue That makes the green economy now a than just heating bills – and that is climate major business opportunity for local change. The government has pledged to tradespeople, and they are ideally placed achieve net zero carbon emissions by to make a positive impact. One of the 2050 and housing accounts for up to 20% barriers to having the work done is, for of those emissions. According to the instance, cited as a lack of information on Federation of Master the potential savings to “Tradespeople are Builders there are currently be made. A builder armed ideally placed to help 8 million lofts that need with all the right insulating, 5 million information can be poised homeowners make uninsulated cavity walls, to be their guide through informed decisions and 20 million uninsulated the process. about what energy floors that need upgrading Many of the energy if we are to reach that saving measures are well efficiency measures target. All of which within the competency of would benefit their represents a huge volume a general builder and property, direct them of new work for builders. there a host of training Of course, a further opportunities available towards what financial significant barrier in the with some manufacturers support is available as years ahead will be a now boasting fully well as actually doing shortage of the skilled fledged academies as installers needed to fit learning centres. the work” solar panels, double So, if all of the above is glazing or any of the other myriad jobs the reality on the ground then why is that improves the energy efficiency of a interest in energy saving not translating home. What is required is a strategy to into a tsunami of new work? Clearly the tackle the skills strategy alongside a initial cost is a factor for already cash national retrofit one. strapped property owners. A lack of Tradespeople are ideally placed to help awareness of what savings can be made is homeowners make informed decisions equally a barrier as is a viable government about what energy efficiency measures incentive. On that latter point Whitehall would benefit their property, direct them initiatives, including the green deal, have towards what financial support is available historically proven lamentably as well as actually doing the work. At the unsuccessful to the task of improving the same time merchants and manufacturers energy efficiency of our existing housing are doing their bit to steer their trade stock. It should not, however, be beyond customers towards the right solutions. the wit of our legislators to devise a With the right government support a huge suitable scheme. volume of new work is ready to be It is the absence of government unlocked. intervention within this space that has led

I

PROFESSIONAL BUILDER NOVEMBER 2026 7


008_PB_NOV26_011_PB_MAR04 08/10/2026 14:02 Page 8

News Professional Builder

email your news to us at pb@hamerville.co.uk Tel 01923 237799

COUNTING THE COST

© Tetyana/Adobe Stock

Cost burden for builders must be lifted, says FMB More needs to be done to boost the nation’s small builders to secure economic growth, says the Federation of Master Builders (FMB). “It would be good to see more investment into the retrofit market for owner occupiers,” declares Brian Berry, Chief Executive of the FMB. “Expanding the retrofit market has the potential to drive significant regional growth but requires a long-term strategy with a commitment to kickstart home improvements for all. The other big hurdle is housing delivery which has stalled over the last year. If the Government is to deliver 1.5 million new homes, it must look hard at how they increase the number of smaller players in the market.” FOR MORE DETAILS VISIT: WWW.RDR.LINK/BCF002

A MATTER OF TRUST

Nearly three quarters (74%) of consumers don’t know about protections for home improvements

A new research report from TrustMark “Consumer Protection in home improvements: Building a consumer centric approach” reveals the lack of consumers’ knowledge and understanding about the protections that should be in place before they have home improvement work done. Two-thirds of homeowners didn’t receive a contract before work starts. Only 24% homeowners expect to get information about how to complain from their tradespeople and nearly a quarter of homeowners having work done experienced a serious problem. FOR MORE DETAILS VISIT: WWW.RDR.LINK/BCF003

CAUGHT IN THE NET

Deadly ‘freebies’ online are putting lives at risk from mesothelioma An industrial disease lawyer has warned that people looking for a bargain online could be putting their health at risk after spotting listings on social media for highly illegal and potentially lethal second-hand building materials. Ryan O’Hara says some online listings appear to offer asbestos containing cement roofing sheets, potentially exposing buyers to a toxic substance responsible for thousands of deaths every year. FOR MORE DETAILS VISIT: WWW.RDR.LINK/BCF004

I

8 NOVEMBER 2026 PROFESSIONAL BUILDER

URGENT APPEAL

£200,000 needed by Lighthouse Charity to Support Construction Workers in Crisis

With the busiest and most challenging quarter of the year for the charity now upon, an urgent appeal to raise £200,000 has been launched. So far this year the number of families reaching out for financial, emotional and physical wellbeing support has increased by a staggering 51%. Food deliveries are up 65%, and the charity has funded over 7,000 counselling sessions. TAKE ACTION AND DONATE TODAY: WWW.RDR.LINK/BCF005


008_PB_NOV26_011_PB_MAR04 08/10/2026 14:10 Page 9

CAREERS IN COLOUR

A guide dedicated to training and employment opportunities in the painting and decorating sector has been issued The Painting and Decorating Association’s (PDA) Careers in Colour brochure sets out routes into the industry, key skills and progression and provides detailed information for schoolleavers and career-changers considering their options in the industry. Available to download for free, the Careers in Colour guide is available as a digital document that painters and decorators can feature on their own websites or social media channels to aid recruitment. TO DOWNLOAD THE CAREERS IN COLOUR GUIDE GO TO: WWW.RDR.LINK/BCF006

VAN-tastic!

Majority of public are fans of trade van drivers

A nationwide survey commissioned by Farizon Auto UK has found that the majority of the public look favourably on trade van drivers. An overwhelming majority of respondents, 84%, had an overall positive view of our sparkies’, brickies’ and plumbers’ driving habits. However, 34% think van drivers are impatient behind the wheel. From the van driver’s perspective, most trade van drivers think driving is more expensive and more stressful than 10 years ago. FOR MORE DETAILS VISIT: WWW.RDR.LINK/BCF007

HOME RUN

' leszekglasner/Adobe Stock

BMF welcomes Government’s “Your First Home” scheme Prime Minister Andy Burnham’s announcement of the Your First Home scheme has been welcomed by the Builders Merchants Federation (BMF), which has been campaigning for stimulus for the housebuilding market since the general election. The BMF said the scheme will provide a welcome boost for the building materials sector, where the fall in the number of new homes being built over the last four years has weighed heavily on demand. FOR MORE DETAILS VISIT: WWW.RDR.LINK/BCF008

Every Merchant Matters

Industry-wide pledge plea to back Every Merchant Matters “movement”

Every Merchant Matters Gavin Crane of Band of Builders has been launched with the aim of harnessing the unique reach of the builders merchant sector to create a nationwide network of branches where construction workers can find someone who is available to listen, start a conversation and help signpost them towards mental health support. The campaign is the brainchild of national construction charity Band of Builders – which has partnered with the Support Yard CIC and has the backing of Builders Merchants Federation (BMF). It is urging merchants to come together to take the first step and pledge their support by going to: WWW.RDR.LINK/BCF009

SHOWING YOUR COLOURS

The Dulux Colour of the Year 2027 has been announced Dulux has named Soulful Sage™ its Colour of the Year 2027, giving decorators a practical starting point for colour conversations. The soft, silvery green and its three complementary palettes can help professionals tackle common colour questions, from which shades work well together to pairings that will suit the use and mood of the space. FOR MORE DETAILS VISIT: WWW.RDR.LINK/BCF010

SOLID PLATFORM

Roofing specialist BMI UK & Ireland has launched MyBMI, a new self-service digital platform that provides roofing professionals with 24/7 access to critical business information. The platform allows contractors and merchants to easily access order history, pricing information, invoices, delivery updates and technical resources at any time of day. FOR MORE DETAILS VISIT: WWW.RDR.LINK/BCF011

I

PROFESSIONAL BUILDER NOVEMBER 2026 9


010_PB_NOV26_Layout 1 08/10/2026 14:12 Page 10

SPECIAL REPORT TRADE ASSOCIATION

The Federation of Master Builders’ Brian Berry responds to the prime minister taking aim at cowboy builders

LICENCE TO BUILD

J

The announcement

of conduct, and a payment protection app both of which are voluntary for now. It’s good the Government is talking about cracking down of dodgy builders, it’s desperately needed, but voluntary schemes have time and time again shown they do not work. They must be enforced through regulation, otherwise people will not take them seriously. In many ways, this approach could make an already confusing landscape even harder to navigate. Consumers must already choose between competent person schemes, commercial providers, trade associations and apps when hiring a tradesperson. The volume of options is revealing: it points to a broken system patched with short-term fixes, when what is needed is fundamental reform.

So, what did the Prime Minister and the Minister responsible for consumer protection, Kate Dearden MP, launch at the end of summer? Two things – a code

There are two big figures in this debate. One of which was used by the Prime

ust before many were heading off for the Bank Holiday in August, the Prime Minister announced a crackdown on cowboy builders in a substantial piece in written in the Daily Mail. It was subsequently splashed across the morning news and took many in the industry by surprise and left many more confused. It seemed that this was designed to be the final summer feel good story from Number 10 before the business of governing following the summer recess of Parliament ended. But the lack of detail and subsequent radio silence from the Government left many wondering what a crackdown on rogue builders was going to look like.

I

The scale of the problem

10 NOVEMBER 2026 PROFESSIONAL BUILDER

“We see this as a licensing scheme – a Licence to Build – where to run a building company you must prove a minimum level of competency; this would be your licence. The bad actors would lose their licence, and consumers would have ample redress options to sort out issues, like warranties and compensation built into the scheme”


010_PB_NOV26_Layout 1 08/10/2026 14:12 Page 11

Minister, Andy Burnham MP in his opinion piece on rogue builders – £14.3 billion – this is the amount lost to rogue builders over the past five years. In some London Boroughs this equates to nearly £50 million lost in a single parliamentary constituency. The national average per person is around £1,800 lost to people hiring unqualified builders. The other, figure, which could be viewed as the more optimistic figure, is £11.2 billion. This is the figure that isn’t spent, per year, due to homeowners fearing hiring a bad builder. Why is it optimistic? Well, if you get the consumer protection system right, this is a hefty sum to be injected into the economy. It’s also a healthy pot of money that would find its way into the pockets of decent, hardworking builders. So, if fears of hiring unscrupulous builders can be squashed, more money can be generated in the process, for both industry and the Exchequer.

What’s the answer? Ultimately, to improve competency and uplift consumer protection, something more than a voluntary scheme will be required. Even government backed schemes like TrustMark have fallen foul, following poor insultation installation carried out under their banner. Retrofit work under the Energy Department’s new Warm Homes Plan, is looking at an alternative to TrustMark, which will likely be a directly run government scheme with regulatory powers. Much of the infrastructure to test a building company’s competence does exist, but it needs leadership and pulling together in one place. We know following the Grenfell disaster, the Hackitt Inquiry found that construction is fragmented, and the issue of consumer protection has proven that once again. Different plans to protect consumers and uplift standards sit across three departments: Housing, Energy, and Business each having skin in the game, all with slightly different plans. This must be brought under one roof, with industry and government working together towards a solution. We see this as a licensing scheme – a Licence to Build – where to run a building company you must prove a minimum level

of competency; this would be your licence. The bad actors would lose their licence, and consumers would have ample redress options to sort out issues, like warranties and compensation built into the scheme. This would all be overseen by government and applied by pre-existing organisations that support competent builders. So, all a consumer would need to look for is the licence, not multiple badges and marks to see if a builder can do the job. At this point, more so than at any other time, momentum is building and the pace is quickening towards a change in the way consumers are protected against rogue traders. But, as ways, there must be leadership and coherency across government to make it happen. FOR FURTHER INFORMATION ON THE FEDERATION OF MASTER BUILDERS VISIT WWW.RDR.LINK/BCF012

I

PROFESSIONAL BUILDER NOVEMBER 2026 11


PB.PMM page and ad grid_Layout 1 06/10/2026 10:50 Page 3


013_PB_NOV26_Layout 1 08/10/2026 14:13 Page 13

SPECIAL REPORT BUSINESS SOLUTIONS – AI

AI ON SITE

In part two of our focus on AI for small builders, Price Doctor looks at the risks you need to understand, and the ways to start using AI practically Five practical ways to start using AI safely If you want to begin without taking unnecessary risks, here’s a sensible approach. 1: Start with admin, not technical decisions: Use AI for emails, scheduling, marketing copy, social media posts and meeting notes first. These are low-risk applications where the downside of an AI error is minimal, and the time savings are immediate. Get comfortable with the tools before using them anywhere near your estimating or specification work. 2: Never trust AI pricing without checking: Treat any AI-generated cost figure as a starting point, not an answer. Cross-reference with your current supplier prices, your own recent job data, and your gut. AI doesn’t know what timber is fetching at your local merchant this week. A system like Price Doctor for pricing reduces the checking task as it is done for you.

3: Build better processes first: AI amplifies whatever systems you already have. If your quoting process is chaotic, AI-assisted quoting will produce chaotic quotes faster. If your client communication is inconsistent, AI-generated messages will be inconsistently sent. Sort out your underlying processes first – then use AI to run them more efficiently.

4: Protect your business data: Don’t upload customer contracts, detailed drawings, competitive pricing or personal data into free public AI tools. Use password-protected, businessgrade platforms for anything sensitive. Check the privacy policies before you paste anything in. 5: Use it to improve the customer experience: Fast responses, professional-looking documents, regular project updates, clear explanations of variations – these things build trust and generate referrals. AI won’t build your reputation, but it can help you communicate in ways that do.

The risks to be aware of AI hallucinates: That’s the industry term for when an AI tool confidently gives you information that is completely wrong. It might produce a specification that references a British Standard that doesn’t exist, quote a material price from three years ago, or describe a construction detail that would fail building regulations. The danger is that it sounds completely authoritative while doing it. Everything AI produces that touches technical or

I

PROFESSIONAL BUILDER NOVEMBER 2026 13


013_PB_NOV26_Layout 1 08/10/2026 14:15 Page 14

SPECIAL REPORT BUSINESS SOLUTIONS – AI

commercial content needs to be checked by someone who knows what they’re looking at. Liability stays with you: If an AI-drafted scope of works is ambiguous and a dispute ends up in court, the AI won’t be sitting in the witness box – you will. If an AI-generated specification is wrong and a building fails, the builder carries the professional and legal responsibility. Using AI doesn’t transfer any of that. Your data isn’t always private: Uploading customer contracts, drawings, pricing schedules or sensitive business information into a free public AI tool carries real risks. Some of that data can be used to train future models. Some tools have poor data security. For anything commercially or legally sensitive, be careful what you feed into a public AI tool. Enterprise versions of major platforms offer better data protections, but they cost money. Over-reliance is a genuine risk: There’s a version of this where a younger estimator produces quotes by essentially asking AI to generate them, without developing the underlying understanding of what things cost and why. That leads to errors, missed items and a gradual loss of the hard-won pricing instinct that experienced builders rely on. AI should speed up a good process, not replace the thinking that goes into it. The hype is real, and so is the noise: There are a lot of people trying to sell AIpowered tools to the construction sector right now, and not all of them will survive the next two years. Be selective. Prioritise tools that address actual pain points and have demonstrable track records, rather than chasing every new platform. Use tools which have been in the market for at least a couple of years as this shows traction and longevity which some of the new start-up – although very exciting – will not have.

sector with significant productivity gains available – and AI is increasingly seen as part of how those gains get realised, particularly in smaller businesses where administrative inefficiency is most acute. The optimistic view is straightforward: tools that reduce the time spent on admin, improve quote quality, speed up client communication and help builders navigate increasingly complex compliance requirements are good for the sector. They free up time for the skilled work that actually creates value.

What the next five years looks like AI-assisted estimating is going to become standard, in the same way that spreadsheets replaced paper take-offs. Builders who resist it entirely will find themselves slower and more expensive to run than those who’ve embraced it – not because AI is magic, but because efficiency boosts productivity over time.

What the industry is saying Research from organisations including RICS and analysis from McKinsey have consistently highlighted construction as a

I

14 NOVEMBER 2026 PROFESSIONAL BUILDER

Job management software is getting smarter. Tools that currently require manual input are increasingly automating scheduling, purchase orders and client updates, like we are doing at Price Doctor. Merchant and supplier systems are likely to integrate AI features that help with ordering, pricing and delivery management. The administrative burden on small builders should, in theory, reduce – though it requires choosing the right tools and actually using them. In reality, customer expectations will increase too, potentially leaving behind firms who stick with the old ways.

The bottom line AI isn’t going to replace builders. But builders using AI – carefully, practically and with realistic expectations – may well replace builders who don’t. The winners won’t necessarily be the biggest firms or the most tech-savvy. They’ll be the ones who use it to send better emails at 5pm rather than bad ones at midnight, to get quotes out in a day rather than a week, and to keep clients informed rather than anxious. The builders who succeed with AI won’t necessarily be the biggest firms or the most technical – they’ll be the ones who use it to save time, communicate better and run tighter businesses. FOR FURTHER INFORMATION ON PRICE DOCTOR VISIT WWW.RDR.LINK/BCF013


PB.PMM page and ad grid_Layout 1 06/10/2026 10:52 Page 3


PB.PMM page and ad grid_Layout 1 06/10/2026 10:53 Page 3


PB.PMM page and ad grid_Layout 1 06/10/2026 10:53 Page 4


018_PB_NOV26_Layout 1 08/10/2026 14:15 Page 18

SPECIAL REPORT PAYMENT

PAYING UP Getting paid on time: how BookaBuilderUK’s SafePay is helping trades avoid the awkward payment conversation very builder knows the feeling: the job is finished, the customer is happy on the day, and then the payment doesn’t land when it should. A call goes unanswered. An invoice sits “in the system.” A customer suddenly finds fault with something that was signed off weeks earlier. For many trades, chasing money owed for completed work is one of the most draining parts of the job – and one of the hardest to talk about, because raising it can feel like accusing a customer of not paying, even when the delay is entirely innocent. BookaBuilderUK, the UK home improvement marketplace, has been developing SafePay, a staged paymentprotection system, with this problem specifically in mind. Rather than being pitched as a tool to police tradespeople, SafePay is designed around a simpler idea: give both sides of a job clarity, in advance, about when money moves and

E

I

How SafePay works why – so payment stops being a conversation that only happens when something has already gone wrong.

The problem, from a trade’s perspective Payment disputes rarely start as disputes. A customer delays a bank transfer while they “sort a few things out.” An invoice is queried over a minor snag. A final payment is withheld pending a small piece of remedial work that was never formally agreed. None of this is necessarily bad faith – but for a tradesperson who has already paid for materials, paid a labourer, and moved on to the next job, it means cash flow takes the hit while the disagreement gets sorted out. The result is a familiar and uncomfortable position: raising the payment issue risks souring a relationship with a customer who might otherwise leave a good review or refer more work, but not raising it means absorbing the cost and the uncertainty.

18 NOVEMBER 2026 PROFESSIONAL BUILDER

SafePay moves the payment conversation to the start of the job, where it belongs, rather than the end, where it’s most difficult. Homeowner funds for a project are placed into a secure account when the job is agreed. From there, they are released to the tradesperson in stages that both parties have already agreed – typically an initial stage on commencement, further stages as agreed milestones are reached, and a final release once the work is complete and signed off. For the tradesperson, that means a clear, pre-agreed schedule for when payment is due, rather than a single lump sum resting on trust after the fact. For the homeowner, it means never having to hand over a large sum with no work yet done, and confidence that funds are only released once agreed stages have actually been completed. Crucially, the milestones and release points are set out and agreed before work begins – so if a question does arise mid-project, both sides are working from the same document rather than a memory of a conversation.


018_PB_NOV26_Layout 1 08/10/2026 14:16 Page 19

A TRADE’S EXPERIENCE

“We built SafePay for the trades who are already doing everything right – turning up, doing good work, being straightforward with customers – and still end up chasing payment because there was never a clear, agreed schedule for when it was due. “Most payment problems aren’t caused by dishonesty on either side. They’re caused by ambiguity — nobody wrote down exactly when money would move and on what basis. SafePay removes that ambiguity from day one. “This isn’t about making life harder for tradespeople, or adding another layer between them and their money. It’s about giving good trades a predictable route to payment, so they can spend less time chasing invoices and more time on the tools.” Bradley Jarvis, CEO of BookaBuilderUK Recent BookaBuilderUK research found that 73.2% of tradespeople surveyed would be open to using an escrowstyle payment system, alongside 88.7% of homeowners who said they would use or consider using SafePay through the platform – suggesting the appetite for a clearer payment structure runs on both sides of the job. SafePay is available through BookaBuilderUK now, with further trade-facing protections – including an upcoming sixyear workmanship warranty on eligible work – currently in development. FOR FURTHER INFORMATION ON BOOKABUILDERUK VISIT WWW.RDR.LINK/BCF014


020_PB_AUG26_Layout 1 08/10/2026 14:18 Page 20

verdict on new products in our unique site tests, Professional butWenowgiveweourwant to give you the chance to try them – AND KEEP THEM – for yourself! All you have to do to enter the free draws is simply just type in www.rdr.link followed by the unique code.

! L L A R O F E E FR 5

X BT5M TAPES

HULTAFORS BT5M CLASS I MEASURING TAPE Accurate measurements start with the right tape. Hultafors’ BT5M Class I measuring tape combines outstanding precision with jobsite durability, featuring a tough rubber-protected case, quick-release belt clip and ergonomic thumb brake. Manufactured using advanced technology for reliable performance, it’s built for professionals who demand accuracy every day. Get in the race for the tape by using the rdr.link below. There you’ll find full entry details to this and other great competitions on the Professional Builder website. FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BCF015

X HEADLAMP

1

JEFFERSON TOOLS HYPERBEAM 700 LUMENS LED HEADLAMP The Jefferson Tools HyperBeam 700 Lumens LED Headlamp features an adjustable strap with hard hat clips for a secure, hands-free fit on site. Its adjustable tilt and zoom-function rotating bezel let users direct light exactly where it’s needed, while three modes – 700 lumens high, 100 lumens low, and flash – cover every task. Rechargeable via USB-C, it’s impact resistant and built to last. One lucky reader will get to light up their next job with this powerful headlamp.

IN! A SIGNED BATH RUGBY SHIRT WITH GRANT UK

W

GRANT UK SIGNED RUGBY SHIRT Grant UK is giving one lucky Professional Builder reader the chance to win a Bath Rugby shirt, signed by the squad, celebrating the heating manufacturer’s new three-year partnership with the Gallagher PREM club. Grant UK will have its branding featured on all three Bath Rugby match kits and replica shirts, and this is your chance to win a signed Home Shirt. Get involved in our giveaways and this Bath Rugby shirt could be yours. Use the rdr.link below for more details. FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BCF016

X ELECTRIC MINI DISC CUTTER

1

EVOLUTION R150DCT-PRO Win the New Evolution R150DCT-PRO 150mm Electric Mini Disc Cutter With Water Dust Suppression & Endurance Premium Diamond PLUS a 150mm Porcelain Diamond Mini Disc Cutter Blade. Bundle worth £189.96. Cut to the chase and enter this great competition using the rdr link below. FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BCF018

FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BCF017

Easy to Enter! It’s now easier than ever before to enter the competitions on our website. We’ve collated all the competitions on one handy page, meaning you only have to enter your details once! www.rdr.link/BCF021 20 NOVEMBER 2026 PROFESSIONAL BUILDER


020_PB_AUG26_Layout 1 08/10/2026 15:46 Page 21

W

IN A ROOF BAR

VAN GUARD BLACK ULTIBAR+ ROOF BAR Van Guard, now part of the Bott Group, is giving readers the chance to win a black ULTIBar+ roof bar. Part of Van Guard’s new Black Range, the ULTIBar+ combines a sleek, durable black finish with lightweight yet heavy-duty aluminium construction. Designed specifically for individual van models, it features an aerodynamic profile to reduce wind noise, adjustable load stops and an innovative T-slot for accessories. Each bar is tested to 80kg and fitted using existing vehicle mounting points. We’re raising the bar on our great giveaways once again with the chance to win this practical roof bar. FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BCF019

X WORKEAR SET

1

MAKITA WORKWEAR ONYX STRETCH TROUSERS, AN ORIGIN BOBBLE HAT AND A PAIR OF ORIGIN WORK SOCKS The Makita Workwear Onyx Stretch Trousers are made from 4-way stretch rip-stop fabric, and offer the flexibility you need to move freely. CORDURA® reinforcement in high-wear areas and triple-stitched seams provide added durability where it matters most, while detachable holster pockets keep your essential tools close at hand and ready to go. And when the weather turns, a water-repellent coating helps keep you protected, making these trousers a practical choice for long days on site. One lucky winner will receive a Makita Workwear set featuring a pair of Onyx Stretch Trousers, an Origin Bobble Hat and a pair of Origin Work Socks - giving you comfort, durability and protection from head to toe. FOR YOUR CHANCE TO WIN VISIT: WWW.RDR.LINK/BCF020

I

PROFESSIONAL BUILDER NOVEMBER 2026 21


022_PB_NOV26_Layout 1 08/10/2026 14:19 Page 22

drainage, guttering & water management

Donna Garside, Head of Group Technical Services at Marshalls Landscaping, explains why drainage needs to be considered from the outset of any residential landscaping project – and looks at some of the options available to installers

WHAT LIES

BENEATH hen it comes to installing a new driveway or patio, it’s often the finished surface that gets most of the attention. Understandably, the customer’s focus tends to be on the colour, material and how the finished project will complement their property. But as part of my role at Marshalls Landscaping, providing technical support to customers and installers, I know that what happens beneath and around that surface is every bit as important. Drainage is a fundamental part of any successful hard landscaping installation. Get it right and it can go largely

W

unnoticed. Get it wrong and the consequences can include standing water, flooding near the property, water running where it shouldn’t, moss and algae growth and premature deterioration of the surface. That’s why drainage needs to be planned from the outset, rather than worked out once installation is underway.

Understanding the rules When it comes to new and replacement driveways, there are specific planning requirements around how surface water is managed. Current planning guidance generally requires surface water from new or

replacement driveways to drain into a permeable area within the property boundary, rather than directly onto the public highway or into the public drainage system. For many projects, planning permission won’t be required. However, if a new driveway uses impermeable materials and rainwater cannot drain naturally into a suitable permeable area within the property, planning permission may be needed. As a general rule, new driveways over 5m² must comply with SuDS requirements, regardless of the existing frontage, although requirements can vary depending on the property, local authority and specific site conditions. For installers, the important thing is establishing where the water is going to go at the survey and design stage, rather than trying to solve the problem once work is underway.

Finding the right solution Marshalls Sawn Verso

I

22 NOVEMBER 2026 PROFESSIONAL BUILDER

Marshalls Sandstone

There’s no single drainage solution that’s right for every project. The size of the


022_PB_NOV26_Layout 1 08/10/2026 14:19 Page 23

area, existing drainage infrastructure, property levels, available space and ground conditions can all influence the approach, so understanding how water moves across the site is an important part of planning the job. Permeable paving systems are one option. These allow water to pass through the surface and into specially designed layers beneath, helping to manage rainfall naturally and potentially reducing the need for additional drainage infrastructure. Permeable paving won’t be suitable for every site. Where ground conditions allow, a soakaway can collect surface water and gradually disperse it into the surrounding ground. Alternatively, linear drainage channels can collect surface water and direct it towards an appropriate drainage point. These are often installed along the edge of paved areas or near garages and entrances. Sometimes, however, it simply comes down to getting the levels right. Correctly designed falls allow water to

Marshalls Savanna

Marshalls Lunar

“Ultimately, good drainage is about thinking beyond the surface. Working out how water will be managed before installation begins can prevent problems later and help ensure the finished project performs as well as it looks” flow naturally towards a suitable drainage area. Even small changes in levels can have a significant impact on how effectively water is managed, and water should never be allowed to collect against the property.

It’s what happens underneath that counts The success of a landscaping project isn’t determined by the paving alone. At Marshalls Landscaping, we often talk about the 80/20 principle. This says that only 20% of a quote will be the product cost – the other 80% is the subbase, workmanship and installation. Excavation, ground preparation, drainage, sub-base materials, compaction and installation expertise aren’t

necessarily the things that the customer notices, but they’re often what determine how well the finished project performs. Poor drainage design or incorrect falls can leave water standing on the surface after rainfall, while inadequate preparation beneath the paving can contribute to sinking, movement and other problems. Many of these issues won’t be obvious when the job is completed. Everything can look spot on when the installer leaves, only for problems to become apparent months or years later.

Start with the site Every project is different, so there’s no substitute for assessing the site properly before work begins. Ground conditions, slopes, property levels, existing features and the available space for managing water all need to be assessed before deciding on the right approach. That expertise is a big part of what a professional installer brings to a project. Ultimately, good drainage is about thinking beyond the surface. Working out how water will be managed before installation begins can prevent problems later and help ensure the finished project performs as well as it looks. Because when the rain inevitably arrives, a well-designed landscape needs to do more than look good. It needs to work. FOR FURTHER INFORMATION ON MARSHALLS VISIT WWW.RDR.LINK/BCF022

I

PROFESSIONAL BUILDER NOVEMBER 2026 23


PB.PMM page and ad grid_Layout 1 26/02/2026 14:21 Page 3


025_PB_NOV26_Layout 1 08/10/2026 14:20 Page 25

drainage, guttering & water management

IN THE PIPE LINE Antony Corbett, Senior Product and Applications Manager at Geberit, explores why rising copper costs and increasing pressure on installers to work quickly and efficiently are prompting a rethink of traditional pipe specification

opper has long been the goto material for plumbing installations, with its familiarity, durability and established installation methods making it an obvious choice for generations of installers. But with copper prices continuing to come under pressure from rising global demand, particularly from electrification, renewable energy and major infrastructure projects, is it time to think differently? For bathroom installers, the impact of rising copper prices is not simply a question of material cost. Margins are under pressure, customers increasingly expect competitive quotations, and time on site is at a premium. Every additional fitting, fixing or installation step can have an impact on the overall cost and programme of a job. That is why multi-layer piping systems are increasingly worth considering as an alternative.

have made it an increasingly practical option for modern installations. Systems such as Geberit FlowFit combine layers of polyethylene and aluminium to provide a balance of flexibility and dimensional stability. For installers, this means pipework can be routed and positioned more easily, while the aluminium layer provides shape stability and acts as an oxygen barrier for appropriate applications. For bathroom projects in particular, where space can be tight and pipework often needs to navigate awkward routes, the ability to bend smaller-diameter pipe by hand can be a significant advantage. It can also reduce the number of elbows and other fittings required, helping to simplify the installation. And, of course, fewer fittings can mean fewer joints to make.

Rethinking the traditional choice

One of the biggest misconceptions around alternative pipework is that the material cost alone tells the whole story. While copper may appear competitive when comparing the price per metre,

C

Multi-layer pipe is certainly not a new technology. It has been used successfully in the UK for decades, but advances in system design and pressing technology

Looking beyond the price per metre

installers need to consider the total installed cost. Labour, fittings, consumables, tooling and installation time all contribute to the final cost of a bathroom project. A system that can be handled more easily, requires fewer fittings and allows installers to work efficiently can therefore offer value beyond the initial material price.

Designed with the installer in mind Installation efficiency is also being supported by developments in pressing technology. For example, Geberit FlowFit uses a streamlined pressing system, with two press jaws covering its full dimensional range. This can reduce the need to change tooling during an installation, while lateral pressing technology allows access from one side – particularly useful when working in confined spaces. Visual insertion-depth indicators and colour-coded markers can also provide a simple way of checking that pipework has been correctly positioned before pressing.

I

PROFESSIONAL BUILDER NOVEMBER 2026 25


025_PB_NOV26_Layout 1 08/10/2026 14:21 Page 26

drainage, guttering & water management

Challenging some old assumptions

Giving installers more choice

For installers who have spent years working with copper, moving to a different material naturally raises questions around strength, durability, thermal movement and performance. But these are not necessarily reasons to dismiss multi-layer systems. Modern multi-layer pipework is engineered specifically to combine the characteristics of different materials. Correct installation and system design remain essential, just as they do with any pipework system. The important point is that installers should assess the system as a whole rather than judging it solely by how closely its behaviour resembles copper.

None of this means copper is disappearing from the bathroom. It remains a proven and widely used material, and there will continue to be applications where it is the preferred choice. The point is that installers now have more options. With material costs under pressure and labour efficiency increasingly important, specifying pipework should not simply be a matter of choosing the material that has always been used. It should be about considering which system can deliver the right combination of performance, installation efficiency and overall value for the project. For bathroom installers, that could mean giving copper the elbow – at least some of the time – and taking a closer look at what modern multi-layer systems can offer.

Less attractive to thieves There is another practical consideration too: site security. Copper has a resale value that makes it an attractive target for thieves, creating additional headaches for contractors and builders when materials are stored on site.

Multi-layer pipe, by comparison, has relatively little scrap value. While this should never be the sole reason for choosing a piping system, it can provide an additional practical benefit where materials need to be stored before installation.

FOR FURTHER INFORMATION ON GEBERIT VISIT WWW.RDR.LINK/BCF023


PB.PMM page and ad grid_Layout 1 06/10/2026 10:55 Page 3


PB.PMM page and ad grid_Layout 1 06/10/2026 16:32 Page 3


PB.PMM page and ad grid_Layout 1 06/10/2026 16:33 Page 4


030_PB_NOV26_Layout 1 08/10/2026 14:21 Page 30

drainage, guttering & water management

SOUNDS OF SILENCE Jack Clutterbuck, head of category water and heating solutions UK & Ireland at wienerberger uk, explores how the rise of apartment living and townhouse developments is shaping specification in drainage solutions s pressure on land and housing supply continues to influence the construction sector, residential development is continuously trying to make better use of the space available. For housebuilders and contractors, that means more schemes are being delivered vertically – not necessarily as high-rise towers, but as smaller apartment blocks, townhouse developments and premium residential schemes where multiple homes share the same structure. NHBC figures show that 14% of new home registrations in 2025 were classified as apartments. This change in building density brings different challenges, particularly around user comfort. And as developers seek to ensure a sense of privacy and comfort when people are living in such close proximity to one another, it shines a new spotlight on the role of acoustic performance in building services. One of the most obvious examples is drainage. The sound of water travelling through a soil stack or waste pipe can become surprisingly noticeable, particularly when pipework runs close to adjoining bedrooms or living spaces. For contractors, this is an important point. Acoustic performance is not simply an issue for large-scale developments or

A

I

specialist commercial projects. As apartment layouts become more compact and living spaces are increasingly positioned alongside shared service runs, even relatively modest residential schemes can benefit from more careful consideration of drainage noise. Manufacturers are supporting specification choices through innovative acoustic drainage systems, and it’s important to consider these solutions as part of the overall approach to building quality from the outset.

The hidden noise in a building Drainage systems are designed first and foremost to move wastewater efficiently and reliably, but when water and solid waste travel through a pipe, they generate sound. That sound can be transmitted either through the air surrounding the pipe or through vibration transferred from the pipe into the building structure. The problem can become more

30 NOVEMBER 2026 PROFESSIONAL BUILDER

pronounced in multi-residential developments, where a single vertical stack may serve bathrooms and kitchens across several floors. A discharge from one apartment can potentially be heard in another, particularly where pipework is positioned adjacent to living spaces. This is where the specification of the drainage system becomes important. Acoustic performance is not simply about adding insulation around a conventional pipe after installation, it’s about smart specification choices at the earliest design stage. And this is particularly relevant once a project reaches the installation stage. where contractors have limited flexibility. Retrofitting additional acoustic measures can be more disruptive and may require changes to boxing, access or other finished elements. Considering the drainage route and system specification before work starts is always a more


030_PB_NOV26_Layout 1 08/10/2026 14:22 Page 31

high-performing pipe may not deliver the intended result if it is connected to poorly selected fittings, incorrectly supported or installed in a way that creates rigid contact with the building structure.

straightforward way of managing acoustic performance.

Adding value through acoustics Approved Document E of the Building Regulations deals with resistance to the passage of sound and applies to domestic buildings, including flats and other residential accommodation. Its guidance recognises that services penetrating separating floors can create potential routes for sound transmission and sets out principles for enclosing pipes and ducts and using sound-absorbent materials. Importantly for contractors, this highlights a wider principle: acoustic performance needs to be considered as part of the building system, rather than treated as an isolated product issue. That means thinking beyond secondary measures such as boxing-in and exploring acoustic pipe systems that are designed with sound reduction in mind from the outset. Material composition, pipe wall construction and

Seeking innovative solutions the design of the complete system can all contribute to reducing both airborne and structure-borne noise. The Master 3 Plus acoustic soil and waste system, supplied by FloPlast, is one such example – manufactured from polypropylene (PP), and independently tested by Germany’s Fraunhofer Institute to be among the quietest soil and waste pipe systems available on the European market. By making sensible specification choices and exploring acoustic drainage systems, developers and contractors can think beyond minimum compliance and add value for occupiers – particularly in more prestigious developments. But the important point is to consider the entire drainage installation as a single solution. A

Ultimately, good drainage is something occupants should barely notice. They should know that it works, but ideally not hear it working. As developers continue to build more homes within tighter footprints, acoustic drainage is becoming less of a specialist consideration and more a key ingredient in delivering comfortable, high-quality residential buildings. For the contractor, making that choice early can help avoid problems later, while contributing to a better experience for the people ultimately living in the building. FOR FURTHER INFORMATION ON FLOPLAST VISIT WWW.RDR.LINK/BCF024

I

PROFESSIONAL BUILDER NOVEMBER 2026 31


032_PB_NOV26_Layout 1 08/10/2026 14:22 Page 32

drainage, guttering & water management

WORKS WONDERS

rom driveways and pathways to shed and greenhouse bases, homeowners continue to value their outdoor areas and their year-round functionality. With another wet winter ahead and homeowners increasingly alert to how water moves around their property, the simplest and most sustainable way to reinforce what’s beneath the surface is often overlooked. According to David Fisher, geosynthetics expert at Geoworks, the solution is geopaving. Domestic driveway and hardscaping work has held up well since the pandemic, with homeowners continuing to invest in the space around their properties. Patios, pergolas and fire pits have all had their moment, with attention since shifting to making outdoor spaces both functional and sustainable. Whatever the forecast, British weather remains unpredictable, and the ground around a property has to cope with whatever arrives. Considering the unknowns ahead, how can builders make sure the outdoor areas they create remain in a healthy state? The answer is geosynthetics. These are tough plastic sheets, grids or fabrics that sit under soil or gravel, helping to keep the ground stable and stop surfaces from moving or sinking. Many also let

F

I

Keeping surface water under control on domestic driveways with Geoworks rainwater drain through, which helps reduce puddles and runoff. Until recently they’ve mainly been used in heavy-duty construction and infrastructure applications, but they are being increasingly adopted by builders and contractors working on residential properties. Geopaving is ideally suited to light and medium-duty domestic applications.

Braced for the British weather If there’s one thing that homes in the UK can bank on in the future, it’s the rain. As

32 NOVEMBER 2026 PROFESSIONAL BUILDER

it merrily pours down, we must remember that much of the UK’s urban landscape is sealed under tarmac and concrete. These materials can block natural drainage, placing a strain on our largely-Victorian sewage system. Thankfully, geopaving provides SuDS compliant permeable surfaces. Allowing rainwater to naturally soak back into the ground, rather than running off into sewers, is tremendous for the long-term health of garden soil and reduces the risk of flash flooding in surrounding areas. There is a practical benefit on domestic jobs too. In England, paving over more than five square metres of a front garden with an impermeable surface requires planning permission, unless the rainwater is directed to a lawn or border to drain naturally. A permeable driveway of any size falls within permitted development, so specifying a permeable


032_PB_NOV26_Layout 1 08/10/2026 14:23 Page 33

build from the outset takes that step off the table and keeps the job moving. The rules cover front gardens rather than paved areas elsewhere around a property, and local restrictions such as Article 4 Directions can still apply. Wider expectations are moving the same way. Defra published national standards for sustainable drainage in 2025, and while these are guidance rather than statute in England, they signal where the industry is heading. Builders who are already comfortable installing permeable surfaces will be well placed as that filters down.

Gravel that stays put Gravel can make for an everlasting battle. One of the frustrations with gravel drives or paths is making sure everything stays in place. Without a stable base gravel tends to scatter, forming ruts and bare spots, as well as headaches for anyone who values a neat appearance. Geopaving is built to help – it’s a modular plastic grid designed to stabilise gravel or soil. When it’s locked together in a square structure, it provides strength and structure without being an eyesore. For gravel that means much less raking, topping up or sweeping stray stones back into place. Once filled and settled, it’s virtually invisible, leaving only a neat and natural surface. That matters for callbacks, because a surface that holds its shape is one the customer is unlikely to reach out about a year later. When filling gravel into the geopaving, one top tip is to overfill by about 10 to 20mm. This hides the grid beneath and

compensates for the natural settling that occurs with footfall or tyre pressure.

Strength below the surface You might not expect recycled plastic panels to get your heart racing, but they do a great deal of work beneath the surface. It can act to divide soil from gravel, preventing sinking or rutting, or helping weak ground support heavy loads. While it does this it allows water to drain naturally, filtering out fine particles that could otherwise cause clogs. Geopaving panels also act as a protective layer, shielding investment in outdoor spaces from erosion, wear and compaction. For gardens on a slope, they can even help prevent soil from washing away in heavy rain. For the builder, that means a surface far less likely to come back as a complaint, and a job that still looks right when the customer recommends you to a neighbour. Geopaving has also been designed for easy installation, through panels that interlock simply and securely, with no heavy machinery or specialist plant needed on site.

Matched to the job What makes geopaving so handy is its versatility. The same product used on a garden path will support a domestic driveway or the base of a garden room. Different applications of geosynthetics have different needs. Driveways need the structural integrity to support repeated loads, while patios and paths are more about keeping the installation process simple, and shed bases call for load distribution and ground protection. Geopaving panels handle all of this.

A sure-footed future When stability and drainage are taken care of beneath the surface, it makes a visible difference to how things flourish above ground. So, if you’re working on a driveway, a garden path or the foundations for a new shed, it might be worth considering the role of geopaving. Ecodeck, the geopaving solution from Geoworks, is one way of keeping surface water under control from the ground up. FOR FURTHER INFORMATION ON ECODECK FROM GEOWORKS VISIT WWW.RDR.LINK/BCF025

I

PROFESSIONAL BUILDER NOVEMBER 2026 33


034_PB_NOV26_Layout 1 08/10/2026 14:23 Page 34

drainage, guttering & water management

Alex Fogg, Drainage Design Engineer at Polypipe Building Products, explains why drainage needs to be considered alongside master planning from the outset

SOUNDS LIKE A PLAN T

he pressure to build more homes across the UK has never been greater. At the same time, developers are navigating increasingly complex planning requirements, environmental regulations and the need to create more resilient developments. For SME housebuilders in particular, balancing these demands while maintaining project viability can make getting key design decisions right first time especially important. Yet one consideration that can have a significant influence on how a site is designed is still too often addressed late in the process: drainage. The position of homes, roads, open spaces and landscaping can all affect how surface water is managed, while factors such as topography, ground conditions, infiltration potential and existing drainage infrastructure can place important constraints on what is achievable. Once a site layout has been established, accommodating these requirements can become a question of

I

fitting drainage around decisions that have already been made. For developers, particularly SMEs working within tight financial and programme constraints, this can leave less flexibility to respond to site conditions and increase the risk of redesign further down the line.

34 NOVEMBER 2026 PROFESSIONAL BUILDER

Drainage should therefore be considered alongside the masterplan, rather than treated as a technical requirement to be resolved once the fundamental shape of a development has been decided.

Drainage should inform development from the outset At the concept stage, developers should be asking some fundamental questions: where does water naturally want to go? Can infiltration realistically be achieved? Where are existing drainage networks and connection opportunities? And how much space could be required for attenuation or other surface-water management measures? At the same time, every site presents its own drainage considerations. Topography, ground conditions, infiltration potential, nearby watercourses and existing drainage infrastructure can all affect the most appropriate approach. Understanding these factors early gives the wider design team a clearer picture of


034_PB_NOV26_Layout 1 08/10/2026 14:24 Page 35

both the opportunities and constraints before detailed designs are progressed. From a drainage design perspective, one of the biggest challenges is accommodating water management after the fundamental site layout has already been established. By that point, there may be considerably less flexibility to respond to what the site requires. A requirement for attenuation, for example, could affect the amount or location of developable land available. Changes to site levels can have implications for roads and finished floor levels, while the location of drainage infrastructure and connection points can influence the wider layout. These issues are much easier to address when they form part of the initial conversation. This doesn’t mean drainage should dictate every aspect of a development; it means understanding the site’s watermanagement requirements early enough for them to inform good design decisions. For SME housebuilders in particular, this can help reduce the risk of costly changes later in the process, while providing greater clarity around what is achievable within the available land, budget and programme

become part of the development’s wider design. A swale, for example, can contribute to a landscape strategy, while appropriately designed attenuation features and planting can provide opportunities to support biodiversity and create attractive communal spaces. This integrated approach is particularly relevant as developers face increasing expectations around environmental performance and resilience. Water management does not necessarily have to compete with these wider objectives; when considered early, it can contribute to them.

drainage in new developments. These considerations should not be viewed in isolation. The way a site manages water can affect its landscaping, biodiversity, highways, levels and overall layout. Bringing these considerations together earlier in the design process can help identify potential conflicts while there is still time to address them. For smaller developers, who may have less specialist resources available inhouse, access to appropriate technical expertise can be particularly valuable. Early advice can help establish the key drainage considerations before significant time and money have been invested in a detailed layout. The objective is not simply to satisfy individual planning or environmental requirements. It is to develop a strategy that works as part of the wider scheme.

The role of manufacturers

Making space for SuDS Sustainable Drainage Systems (SuDS) are one of the clearest examples of why drainage needs to be considered early in the design process. SuDS can incorporate features such as swales, detention basins and rain gardens to manage surface water close to where it falls. By slowing, storing and, where appropriate, treating runoff, they can help reduce surface-water flood risk and ease pressure on conventional drainage networks. But a SuDS feature is not simply another item to be added to a drainage drawing once a development has been designed. Its location can influence road alignments, plot boundaries, site levels, landscaping and the amount of usable open space available. If these requirements are only considered once the layout has been agreed, opportunities to integrate them effectively may be limited. When considered at the master planning stage, however, SuDS can

Delivering housing growth responsibly The pressure to increase housing delivery makes getting these decisions right first time increasingly important. Developers need to balance the efficient use of available land with requirements around flood risk, water management, biodiversity and long-term resilience. This becomes more challenging as planning and environmental expectations continue to evolve. Biodiversity Net Gain, for example, is encouraging developers to think more holistically about the environmental contribution of a site, while the implementation of Schedule 3 of the Flood and Water Management Act will place greater emphasis on sustainable

A manufacturer’s involvement does not necessarily need to begin when a product is ready to be specified. Technical expertise can add value much earlier, when developers, consultants and contractors are establishing what is achievable on a site. Early conversations can help identify potential drainage constraints, consider appropriate surface-water management approaches and explore how drainage can be integrated with the wider masterplan. This could include looking at attenuation requirements, SuDS opportunities, site-specific constraints and the information required to support planning and detailed design. The value of this input is not about prescribing a particular product or solution before the design has developed. It is about bringing practical drainage knowledge into the conversation at a point when there is still flexibility to make changes. For developers, this can help reduce uncertainty and the likelihood of latestage redesign, while giving the wider project team greater confidence in how the drainage strategy fits with the development as a whole. FOR FURTHER INFORMATION VISIT WWW.RDR.LINK/BCF026

I

PROFESSIONAL BUILDER NOVEMBER 2026 35


PB.PMM page and ad grid_Layout 1 06/10/2026 10:56 Page 3


037_PB_NOV26_Layout 1 08/10/2026 14:24 Page 37

drainage, guttering & water management

GO WITH THE FLOW One supplier, one solution: Swish Building Products explains why simplifying drainage procurement makes sense or professional builders, choosing a supplier is about far more than finding the right product at the right price. As drainage systems become broader and projects more demanding, the value of having one reliable source for an entire job is becoming increasingly clear. Time is one of the most valuable commodities on any building project. Delays, missing components and the need to source compatible products from multiple suppliers can quickly add unnecessary complexity – particularly when installers are working to tight programmes. That makes the traditional approach of buying different elements of a drainage installation from different sources increasingly difficult to justify. For builders, the question should perhaps be less about where can I buy this particular product? And more about what can my supplier do for me across the entirety of this job?

F

The case for a single source A supplier capable of covering the complete drainage requirement can bring several practical benefits. Fewer individual purchasing decisions means less time spent searching for products, checking compatibility and coordinating deliveries. It can also make it easier for merchants to manage stock and for installers to deal with a consistent product portfolio. This is the thinking behind Kayflow’s expanded drainage range, which now spans rainwater, soil, waste water and underground drainage – taking its offer from the roofline through to below-ground drainage. For the builder, however, breadth of range is only part of the equation. A

genuinely useful single-source supplier needs to combine product availability with dependable service, as Andrew Bishop, National Account Manager at Kayflow explains: “The real value of a single-source supplier is not simply having more products in a catalogue. It is giving builders confidence that the products

they need will be available, compatible and supported when they need them. We believe a supplier should make a job simpler – from initial product selection through to delivery and installation.”

Availability is part of the product A product that is technically right but unavailable when it is required is of little

I

PROFESSIONAL BUILDER NOVEMBER 2026 37


037_PB_NOV26_Layout 1 08/10/2026 14:25 Page 38

drainage, guttering & water management

practical value to a builder. Stock availability and delivery performance therefore need to be considered alongside product specification. Kayflow consistently maintains high stock levels and operates with a 99 per cent on-time, in-full delivery rate, whilst also having no minimum order value. For builders and merchants, those details can be just as important as the products themselves. The ability to order what is required, when it is required, can help reduce the risk of a missing or unavailable component holding up a job. It is also why a supplier’s delivery proposition should be considered in terms of reliability rather than simply speed. A dependable delivery service allows builders to plan with greater confidence, while removing some of the uncertainty that comes with juggling multiple suppliers.

Support that continues beyond delivery The relationship with a supplier should not end when the product arrives on site. Drainage installations can involve different systems, applications and connection requirements, and installers need access to accurate information when selecting and fitting products. Technical support, installation guidance and specification information therefore form an important part of the overall supplier proposition. Kayflow’s Technical Hub provides product and installation guides, including information relating to its new Waste Water system, as well as specification information for its rainwater systems. For professional builders, this kind of resource can help turn a product range into a complete service – supporting the installer not just with what to buy, but with the information needed to use it effectively. Education is increasingly important here too. As product ranges expand and regulations, specifications and environmental expectations evolve, suppliers have an opportunity to help the trade stay informed rather than simply expecting installers to keep up independently.

I

Sustainability is moving up the agenda Environmental considerations are another reason why the role of the supplier is changing. For many builders, sustainability is no longer simply a matter of corporate policy or something driven by large developers. Customers, clients, specifiers and the wider construction industry are increasingly interested in understanding the environmental impact of the materials being used. That creates a need for reliable, independently verified information rather than broad environmental claims. An Environmental Product Declaration (EPD) can provide that evidence. Kayflow has an independently verified EPD for its rainwater range, providing lifecycle environmental-impact data for its products. For builders, the benefit is transparency. Rather than simply being told that a product is a more environmentally responsible choice, an EPD provides the information needed to support more informed decisions and help builders demonstrate that environmental considerations have been factored into material choices.

The supplier has to do more The evolution of drainage procurement reflects a wider change in what professional builders should expect from

38 NOVEMBER 2026 PROFESSIONAL BUILDER

their suppliers. A good supplier should provide the right products. A better one should make those products readily available, deliver them reliably, provide technical assistance and help the trade understand how to use them. Increasingly, it should also be able to provide credible information about the environmental impact of those products. Kayflow’s expansion from its established rainwater systems into waste water, soil and underground drainage reflects that broader approach. Its portfolio now includes rainwater profiles and accessories, a new Waste Water range, 110mm soil systems and 110mm and 160mm underground drainage, alongside inspection chamber systems. For builders, the attraction is clear: less time spent managing suppliers and more time spent building. As projects become more complex and expectations around reliability, support and environmental responsibility continue to rise, the value of a supplier that can bring these elements together is likely to become increasingly important. The future of sourcing is not necessarily about finding more suppliers. It may be about finding the right one. FOR MORE INFORMATION ABOUT KAYFLOW’S DRAINAGE RANGE AND TECHNICAL RESOURCES, VISIT WWW.RDR.LINK/BCF027


PB.PMM page and ad grid_Layout 1 06/10/2026 10:58 Page 3


040_PB_NOV26_Layout 1 08/10/2026 14:25 Page 40

drainage, guttering & water management

HIT THE DEKS utdoor living has changed the way we think about the domestic garden. Porcelain patios, contemporary terraces, expansive driveways and gardens built for entertaining have all raised the bar for what homeowners expect from their outside space. They want it to function as beautifully as it looks, and they want it to do so all year round. Materials, planting and lighting tend to get the credit for a successful scheme. Drainage rarely gets a mention, yet it is the element that decides whether everything else holds up. Get it wrong and even the most carefully specified hard landscaping starts to fail within a season or two. Standing water appears, surfaces stain, and clients who paid for a polished finish are left with a problem instead. I’ve spent enough years in this industry to watch attitudes towards drainage shift, and the change over the last few years has been striking. Homeowners no longer see a beautiful patio and a functional one

O

Ollie Janes, Managing Director, DEKS Industries EMEA discusses why drainage deserves a seat at the design table

“Clients want spaces they can use every season. Contractors need these spaces to stay compliant, durable and safe once the job is finished and the invoice is paid”

I

40 NOVEMBER 2026 PROFESSIONAL BUILDER

as separate things. They expect both qualities in the same space, and they expect the people who design and build it to deliver that as standard. Drainage has stopped being an afterthought bolted on once the paving is down. It has become part of the brief from day one. There are good reasons for that shift. The UK’s weather has become harder to plan around, with heavier and more frequent rainfall putting real pressure on garden drainage systems that were never designed for it. Building regulations and sustainable drainage system requirements have tightened too, so contractors now need to show that surface water is being managed properly, not just hope it drains away somewhere out of sight. For landscapers working on domestic projects, that combination brings a challenge and an opportunity in equal measure. Clients want spaces they can use through every season. Designers and contractors need those spaces to stay compliant, durable and safe once the job is finished and the invoice is paid. It’s why so many professionals are now specifying


040_PB_NOV26_Layout 1 08/10/2026 14:26 Page 41

product round-up

integrated drainage systems built specifically for landscaping environments, rather than adapting solutions designed for other applications. What’s changed most is the thinking about what drainage should look like. Slot drains and architectural grating have moved water management out of hiding and into the design itself. A run of drainage can now sit alongside a paving scheme as a feature, rather than a gap to be disguised or apologised for. That is really the point I’d want any landscaper reading this to take away. Drainage is not a necessity to be tolerated. It’s a designed component, one that should complement the finish a client is paying for rather than compromise it. Think about water “Think about water management at the concept management at the stage, alongside materials and layout, and the result is concept stage, a space that performs alongside materials properly and looks the part and layout, and the from the first day to the last. result is a space that Get it right, and nobody notices the drainage at all. performs properly They notice a garden that and looks the part copes with a downpour in the autumn and looks just from thet first day as sharp for a barbecue in to the last. Get it the summer. That’s the right and nobobdy standard homeowners are notices the drainage asking for now, and it’s why focused on developing at all. They notice a products for our DekDrain garden that copes range that combine highwith a downpour in performance water capture with clean, contemporary the autumn” detailing. From sleek stainless-steel edging to subtle slot drains and decorative grating options, the range allows landscapers to treat drainage as a design feature rather than something to conceal.

RAINWATER HARVESTING

A range of rainwater harvesting systems that maximise the use of free rainwater rather than rely on mains water topups has been launched by GRAF UK. In the new systems, the mains water feeds directly into the plumbing rather than via the tank, so full tank capacity is preserved for rainwater. GET MORE DETAILS AT: WWW.RDR.LINK/BCF029

DUCTILE IRON Wrekin Products has become the first civil engineering product manufacturer in the UK to achieve Code for Construction Product Information (CCPI) assessed status for its ductile iron range. Wrekin’s ductile iron product range includes manhole covers, gully gratings, through to kerb units, surface boxes and accessories. GET MORE DETAILS AT: WWW.RDR.LINK/BCF030

RAINWATER SYSTEMS

Three new Environmental Product Declaration’s (EPDs) are announced for Freefoam Building Products’ PVC rainwater systems and PVC & UPVC roofline products. It gives the trade clear, concise access to verified environmental performance information for key roofline and rainwater products. GET MORE DETAILS AT: WWW.RDR.LINK/BCF031

Built for hard landscaping, too That same thinking extends into our DekRock Heavy/Gravel Range, developed for hard landscaping areas that take a real pounding: driveways, parking areas and heavy-use pedestrian surfaces. Its open structure allows rainwater to infiltrate rapidly, cutting down on standing water and reducing the risk of flooding or ice forming underfoot. For landscapers specifying beyond the garden and into drives and hardstanding, it’s a way of building the same reliable, highpermeability drainage into surfaces that need to cope with real loads, not just foot traffic. FOR MORE INFORMATION ON DEKS LANDSCAPING RANGE, INCLUDING ITS DEKDRAIN A15 EDGE SLOT DRAIN AND THE A15 LINEAR BAR WAVE GRATING, VISIT WWW.RDR.LINK/BCF028

CIRCULATOR PUMP

A high-quality, efficient pump that is straightforward to fit, set up and leave working with confidence. That’s how DAB Pumps describes its EVOSTA 3 unit. It makes use of electronic control and a permanent magnet motor to enable the circulator to respond more efficiently to system demand, helping avoid unnecessary energy consumption. GET MORE DETAILS AT: WWW.RDR.LINK/BCF032

I

PROFESSIONAL BUILDER NOVEMBER 2026 41


042_PB_NOV26_Layout 1 08/10/2026 14:26 Page 42

tools & equipment

GETTING JIGGY WITH IT

Tibby Singh cuts a fine figure with the Festool PSC 500 Cordless Pendulum Jigsaw et’s be honest, a jigsaw is one of those tools that quickly earns its place in the van. Whether you’re cutting curves, notching timber, trimming worktops or tackling awkward shapes, there aren’t many tools that can wiggle their way through a job quite like a jigsaw. When you’re working on site, precision matters. Nobody wants a blade wandering off on its own little adventure halfway through an expensive piece of timber. That’s where the new Festool PSC 500 Cordless Pendulum Jigsaw comes into play. This is an 18V cordless barrel grip pendulum jigsaw designed for serious cutting in wood, plastics and metals and, after putting it through its paces, I’ve been seriously impressed. At the heart of the PSC 500 is Festool’s EC-TEC brushless motor. It delivers plenty of power while maintaining a consistent cutting speed, even when the going gets tough. With a 26mm stroke length and variable stroke rate control,

L

I

you can adjust the cutting action to suit the material. It can cut up to 120mm in solid wood, 20mm in non-ferrous metals and 10mm in soft steel. That’s plenty of cutting capacity for everything from general joinery and carpentry to heavier duty work. With it being a part of the Festool 18V system, there’s no cable getting under your feet or looking for a socket halfway through the job. Just pop on a battery and

42 NOVEMBER 2026 PROFESSIONAL BUILDER

get cutting. Where the PSC 500 really starts to stand out is its blade guidance. Festool have fitted an adjustable triple saw blade guide, with carbide backup jaws positioned right above the cutting area. These help keep the blade stable and reduces deflection. In simple terms, the blade is less likely to start doing its own thing when you’re following a curve or trying to keep a straight cut. Festool are


042_PB_NOV26_Layout 1 08/10/2026 14:29 Page 43

certainly on the right track with this feature. The barrel-grip design also deserves a mention. Your hand sits close to the workpiece, giving you excellent control, particularly when navigating tight curves. It feels natural in the hand and makes steering the jigsaw around intricate shapes surprisingly easy.

Ahead of the curve The Jigsaw can swivel in both directions, allowing you to make bevel and mitre cuts. So, whether you’re cutting a straight line, following a curve or putting an angle on your material, the PSC 500 gives you plenty of flexibility. And if you want to take things a step further, there are a range of accessories available for the PSC 500 to expand its capabilities. One that particularly caught my attention is the Festool KS-PSC 500/420, which allows you to cut accurate circles. This is a great addition for jobs where you need a neat, consistent circular cut rather than trying to freehand it and hoping for the best. That’s how they roll! Festool has also thought about visibility. An integrated blow-off function helps clear dust and debris away from the cutting line, while switchable LED lighting illuminates the blade and workpiece when working in darker areas. So, there’s no

need to blow away the dust yourself, which is a sigh of relief. There’s also a chip guard and dust extraction connection for compatible extractors, helping keep the cutting area cleaner and your view of the blade clearer. The patented Splinter Guard is another useful addition, helping minimise tear out on both the top and bottom surfaces of laminated or veneered materials. Like many of Festool’s newer tools, the PSC 500 brings some clever connectivity to the party. Through Bluetooth, you can connect it to the Festool App to check operating data, track the tool’s location and receive accessory recommendations. It can also communicate wirelessly with compatible Bluetooth dust extractors. The 18V platform is compatible with Festool’s latest battery technology, including the TBX 4 tabless battery, designed to improve runtime, ergonomics and highcurrent delivery.

User-friendly Another feature that deserves a mention is the Systainer it comes in. Festool has included a handy pull-out drawer at the

bottom, giving you somewhere dedicated to keep all your accessories, blades and other bits and pieces. It may sound like a small detail, but it’s a great idea. There’s nothing worse than trying to close a tool case when you’ve thrown everything into one compartment and everything is piled up, sticking out in all directions. The pullout drawer keeps your accessories organised and means you’re not having to play Tetris every time you put the tool away. Simple, but very effective. After using the Festool PSC 500 Cordless Pendulum Jigsaw, I’m genuinely impressed. It’s powerful, accurate, comfortable and easy to control. The barrel grip gives you excellent handling, while the triple blade guide keeps things steady when precision is important. The combination of power, cordless freedom, excellent visibility, useful accessories, smart features and clever storage makes this a very capable bit of kit. For me, the PSC 500 has blown me away. It doesn’t just cut; it cuts straight to the point and above the rest! FOR FURTHER INFORMATION ON THE FESTOOL PSC 500 CORDLESS PENDULUM JIGSAW, VISIT WWW.RDR.LINK/BCF033

Tibby Singh – www.TibbySingh.com

I

PROFESSIONAL BUILDER NOVEMBER 2026 43


PB.PMM page and ad grid_Layout 1 06/10/2026 10:59 Page 3


045_PB_NOV26_Layout 1 08/10/2026 14:29 Page 45

tools & equipment

TRIED AND TESTED CF Construction recently put Carhartt workwear through its paces

rofessional Builder caught up with the team to find out what they thought and learn more about the family business that has grown from its fencing roots. For contractors working in all weathers, quality workwear is more than just part of the uniform. It needs to be comfortable enough for long days on site, durable enough to withstand demanding tasks and reliable enough to keep workers protected throughout the day. For businesses with

P

large site teams, investing in hard-wearing kit can make a real difference to both productivity and morale. CF Construction is a company that’s grown steadily over more than four decades. Today you might find the team working on anything from domestic resin driveways to delivering highway maintenance contracts for local authorities across the East Midlands. The business began life in 1980 when John Coen established Collingham

Fencing, initially manufacturing and installing domestic fencing. Over the following years the company expanded into commercial fencing then diversified into civil engineering and concreting. By the 1990s, the civil side of the business had become a significant part of its workload and, in 2003, CF Construction (Collingham) was formed. Today the company continues to work with many of the original commercial clients, alongside a growing list of local authorities.

I

PROFESSIONAL BUILDER NOVEMBER 2026 45


045_PB_NOV26_Layout 1 08/10/2026 14:30 Page 46

tools & equipment

The crew put a range of Carhartt jackets to work. The Washed Duck Active Jac is an update to the popular J130, developed using feedback from Carhartt’s Crew of real, hard-working volunteers. This jacket pairs heavyweight cotton duck with lightweight 3M™ Thinsulate™ insulation to keep the wearer warm without feeling weighed down. The blanket-lined Iconic J01 Duck Detroit Jacket proved popular too. The sturdy cotton duck is comfortable and warm and the drop tail hem left plenty of room to reach a tool belt. The team also layered up with the Marquette Logo Sweatshirt and Marquette Full-Zip Sweatshirt, both cut from a midweight cotton blend that kept the chill out without getting in the way of swinging a hammer or hauling supplies. The Rugged Flex™ Duck Double-Front Trousers with reinforced front panels and a hammer loop keeping tools close at hand, were put through their paces, while the Rugged Flex™ Duck Trousers made it easy to bend, crouch and kneel on site thanks to the added stretch.

Managing Director Chris Coen joined the family business in 1993, starting as a labourer before progressing through the roles of ganger and site manager. In 2005, he stepped into a managerial role, helping steer the company’s future direction: four years later, CF Construction expanded into highway maintenance after identifying a gap in the market. That decision has transformed the business. Around 70 per cent of its workload now comes from local authority highway maintenance contracts across Lincolnshire, Nottinghamshire and Leicestershire.

Setting the standard Today, CF Construction employs around 80 people, with 10 office-based staff and around 70 operatives on site. Its work includes footway and cycle path construction, resurfacing, patching, kerbing and drainage, plus building industrial units and undertaking construction projects for long-standing clients. For a contractor like CF Construction, setting the standard for quality extends far beyond project delivery, right down to the very gear their teams wear on site. With such a large site workforce, supplying reliable kit is a key consideration, so when the company recently trialled Carhartt workwear, it was pleased to see how well the range measured up. “CF Construction’s company values are quality, honesty and reliability,” says Chris. “My first impression was that Carhartt workwear delivers on two of those straight away because the quality is exceptional, making it incredibly reliable. The customer service and communication from Carhartt certainly ticks the box for the third value. When you spend hours every day in workwear, comfort is essential, when you’re supplying that many operatives, durability really counts as well.” On site, Chris tried the Washed Duck Bartlett Active Jac, which combines Full Swing™ construction with Rugged Flex™ stretch, so he felt no restriction when bending or reaching. To make sure he kept that stretch all over, he layered up with the loose-fit Marquette Crewneck Sweatshirt and paired it with the Slim Tapered Rigby Trousers, cut in a relaxed fit for unrestricted movement.

I

Dependable equipment

GIVEAWAY

46 NOVEMBER 2026 PROFESSIONAL BUILDER

Professional Builder has two Carhartt Detroit Jackets to giveaway.

For the full entry details use the rdr.link below WWW.RDR.LINK/BCF034

Strong, safe boots and shoes are a must on site, so Chris tried the Wylie Rugged Flex™ Waterproof S3 Safety Boot out. It has a lightweight aluminium toe and flexible dual-density injection outsole for a strong grip on ladder rungs, cement floors and uneven terrain. The CF Construction team also tried the Ironwood Rugged Flex™ S3L Safety Boot with its durable Vibram® outsole for reliable grip and heat resistance underfoot. For a contractor whose reputation has been built over more than 40 years on delivering quality work for repeat clients, it’s little surprise that Chris judges his workwear by the same standard: dependable equipment matters just as much as dependable people. Whether it’s investing in skilled staff, maintaining longterm customer relationships or selecting hard-wearing workwear, CF Construction continues to build its business on the same principles established by its founder over four decades ago. TO VIEW THE CARHARTT RANGE VISIT WWW.RDR.LINK/BCF035


PB.PMM page and ad grid_Layout 1 06/10/2026 11:00 Page 3


048_PB_NOV26_Layout 1 08/10/2026 14:30 Page 48

tools & equipment

LIGHTING THE WAY Why site lighting is the upgrade most builders never think to make. Darren Binns, National Sales Manager at Jefferson Tools, on getting it right very trade on site has an opinion on the right drill, the right saw, the right van. Almost nobody has an opinion on lighting. Yet ask any builder where they lose time on a job and the honest answer is often the same: the bits you can’t see properly. The back of a loft. A cellar with no power. A wall cavity at four o’clock on November afternoon when the daylight has already gone. “Lighting is the one thing every stage of a build needs and the one thing nobody specs,” says Darren Binns, National Sales Manager at Jefferson Tools. “People will spend a fortune on

E I

power tools and then work off a phone torch in a dark plant room. It ties up a hand, the battery’s flat by lunch, and you still can’t aim it where you need it.” A phone torch is fine for a quick look. For actual work it is a compromise, and the right portable lighting is one of the cheapest upgrades a builder can make to work faster and more safely. The catch is that “the right lighting” isn’t a single product. It depends on the job.

48 NOVEMBER 2026 PROFESSIONAL BUILDER

Brighter isn’t always better Lumens measure visible light output, and it is tempting to assume more is always better. It isn’t quite that simple: doubling the lumens doesn’t double the brightness you actually see. For close inspection work, 100 to 150 lumens is plenty. For a whole loft, an unlit property or a large plant room, you are into 1,000 lumens or more. The smarter spec is adjustable output. Builders rarely need full brightness all


048_PB_NOV26_Layout 1 08/10/2026 14:30 Page 49

day, and dialling it down cuts glare when you are working close to reflective surfaces such as tiles, glass or polished steel, as well as extending run time on a rechargeable. Jefferson Tools’ 1500 Lumens Clip Light runs three modes (1500, 800 and 160 lumens), giving up to 15 hours on the low setting. LED technology has moved the game on too. Cree LEDs are known for high output, efficiency and long service life, while COB (chip-on-board) throws a broad, even spread that kills the shadows you get in cupboards, service voids and stairwells.

Reading an IP rating IP, or Ingress Protection, tells you how well a light is sealed against dust and water, shown as two digits. The first is protection against solids, the second against liquids. IP65 means dust-tight and able to shrug off water jets, which is what you want for exposed or wet conditions. For most work inside a weathertight building, IP44 is enough. It is a small spec to check, and it is the difference between a light that survives the job and one that doesn’t.

Getting the beam where you need it Half the battle is fixing the light in the right place, and on site that is rarely a flat, convenient surface. This is where mounting options earn their keep: magnets for steelwork, hooks for lofts and joists, clamps for pipes, brackets and ladders, and tilting heads to aim the beam. Hands-free is worth having in the kit too. A headlamp keeps the light on your line of sight when both hands are busy cutting, fixing or testing, and doesn’t care that your gloves are covered in muck or

“Good site lighting isn’t glamorous, and it is easy to overlook next to the tools that do the obvious work. But seeing properly means working faster, fewer mistakes and safer hands in awkward spaces” filler. Jefferson Tools’ 500 Lumens COB LED Headlamp has high and low settings and a motion sensor for hands-free switching, and the head is magnetically mounted so it lifts off the band to be used on its own. For lighting a whole area, the same Clip Light doubles up: a clamping arm grips pipes or timber, four magnets cover the surfaces a clamp won’t, and a ball joint with a 120° beam spreads the light where you point it.

Power where there isn’t any The most common site problem is simply

no power: lofts, cellars, extensions before first fix, anywhere the supply hasn’t reached. Rechargeable and battery-run lights have made that a non-issue. Jefferson Tools’ 4500 Lumens Portable Site Light has two heads that tilt 90 degrees and swivel 280 degrees, plus a removable head with a magnetic base and hook so it can be lifted out and positioned exactly where it is needed. It runs off a power tool battery, supplied with a HiKOKI adaptor and with others available to suit different tool ranges, so it is one less charger to think about. Good site lighting isn’t glamorous, and it is easy to overlook next to the tools that do the obvious work. But seeing properly means working faster, fewer mistakes and safer hands in awkward spaces. The trick is matching the light to the task: sharp compact beams for inspection, clamp and magnetic lights for tight spots, broad site lights for the big jobs. Get the mix right in the van, and poor lighting stops being a problem you work around. FOR MORE INFORMATION ON JEFFERSON TOOLS AND TO DOWNLOAD THE LATEST CATALOGUE, VISIT WWW.RDR.LINK/BCF036

I

PROFESSIONAL BUILDER NOVEMBER 2026 49


PB TF - NOV26_Layout 1 14/09/2026 12:19 Page 1

THE HANDS-ON TRADESHOW BUILT FOR THE TRADE

PROFESSIONAL BUILDER

TOOLFAIR 2026

FEATURING

Professional

LIVE!

1000’S OF SHOW DEALS ON TOP BRAND TOOLS ● LIVE DEMOS ● FREE CPD SEMINARS ● FREE ENTRY ● FREE PARKING ● FREE PROFESSIONAL BUILDER T-SHIRT ● FREE BACON ROLL

FORTHCOMING SHOWS:

SANDOWN PARK

ALEXANDRA PALACE

BOLTON ARENA

18TH & 19TH NOVEMBER 2026

4TH & 5TH FEBRUARY 2027

4TH & 5TH MARCH 2027

SURREY

LONDON

BOLTON

REGISTER FOR FREE AT WWW.TOOLFAIR.INFO


051_PB_NOV26_Layout 1 08/10/2026 14:31 Page 51

tools & equipment

Higher fuel bills, constant noise and a lungful of fumes. Ian Wakelin, Director of Jobsite Solution Specialists (JSS) at MILWAUKEE® explains why more builders are swapping petrol for battery power

CLEANING UP

sk most builders why they’ve stuck with their petrol breakers, cut-off saws and generators, and the answer usually comes down to habit. The kit works, they’re familiar with it and swapping it out feels risky. But the arithmetic behind that habit is shifting, and it’s worth doing the sums on your own site.

A

The running costs are stacking up Let’s start by looking at what petrol actually costs to run. Fuel is the obvious expense. But less obvious is the steady impact of buying spark plugs, fuel filters, carburettors, air filters, drive belts and starter cords, plus the fuel-oil mixing that two-stroke engines demand. MILWAUKEE®’s own figures put the annual saving from switching a single cut-off saw to its MX FUEL™ battery equivalent at more than €240. Move up to a breaker, and that climbs to around €1,700 a year. A tower light comes in near €1,800. Those are numbers per-tool, so they quickly add up when applied across a fleet. Whilst battery kit may not be cheaper to buy, up front, the argument here is what happens over 12 months of ownership, once the fuel, servicing and merchant trips are stripped out. That’s where the gap closes, then reverses.

Noise and fumes you feel every day Noise is the single biggest reason builders say they’ve moved across to battery power, ahead of anything to do with the environment. In MILWAUKEE®’s EMEA research of more than 2,000 professionals, noise reduction topped the list of motivations of almost a third of respondents (at 31.8 per cent.) Battery tools typically run around 10dB quieter than their petrol equivalents. That 10dB can make the difference between getting on with a job near occupied buildings, working an

I

PROFESSIONAL BUILDER NOVEMBER 2026 51


051_PB_NOV26_Layout 1 08/10/2026 15:28 Page 52

tools & equipment

evening shift or taking on a job at a hospital, or being turned away at the gate. One in three construction workers breathes harmful exhaust fumes three to five days a week, and the long-term links to asthma, COPD and lung cancer are well documented. It sits alongside the dust risk UK builders already know about. The HSE estimates silica exposure alone kills more than 500 construction workers a year in Great Britain. In that context, anything that can be done to cut down on workers inhaling fumes, has to be worthwhile. The environmental case is real too. Across the EU, non-road machinery releases more than 108 million tonnes of CO2 a year, and poor air quality costs Europe billions in lost productivity. A single MX FUEL™ tower light running for a year can prevent more than 4,061 kg of CO2, roughly what four work vans put out annually. Which is something to think about.

tightened again in January 2025, and procurement teams on big projects are increasingly writing zero-emission kit into the contract. None of this bans petrol outright, but it shrinks the range of available jobs, and indicates where regulation is going.

What Skanska learned If you want proof this works at scale, look at Skanska. Its Swedish rental arm tested MX FUEL™ machines for around two years before adding them to its fleet, and now plans to run all-battery instead of petrol by 2027. Safety Features like AUTOSTOP™, which automatically shuts off equipment if it’s tipped over, were seen as one of the big benefits behind switching over to

The rules are catching up Regulation is already narrowing the spaces where petrol kit can go. California has banned the sale of new petrol tools in built-up areas. More than 100 US cities have their own restrictions, and Stockholm and Oslo run no-emission zones. Many European cities are considering similar schemes. Closer to home, London’s Non-Road Mobile Machinery Low Emission Zone

I

52 NOVEMBER 2026 PROFESSIONAL BUILDER

battery power and operators appreciated being able to work indoors without having to mix and store petrol. That positive trial matches the experience of the wider trade. Nine out of ten construction professionals (93 per cent) already use battery tools somewhere on site, and many UK hire firms now stock battery alternatives as standard. The question for most firms is no longer whether battery can do the job, but which jobs to move across first.

Where to start My advice is to be practical. Pick the projects where the maths and the site conditions clearly stack up, and start there. If you would rather see the kit running before you commit, MILWAUKEE’®s Jobsite Solutions team will bring the MX FUEL™ range to your site and let you judge the performance, runtime and running costs in your own operation. The switch doesn’t have to happen all at once. But it’s worth working out where petrol is costing you more than it’s worth. TO DOWNLOAD THE ROOM TO BREATHE (MX FUEL™ EDITION) WHITEPAPER VISIT WWW.RDR.LINK/BCF037 FOR FURTHER INFORMATION ON MILWUAKEE® VISIT WWW.RDR.LINK/BCF038


PB.PMM page and ad grid_Layout 1 08/06/2026 15:49 Page 3


054_PB_NOV26_Layout 1 08/10/2026 14:32 Page 54

tools & equipment

CUTTING THE MUSTARD Evolution expands its electric disc cutter range with two compact 150mm machines developed for paving, landscaping and masonry work volution has helped set the benchmark for electric disc cutting, giving tradespeople a practical alternative to petrolpowered equipment. From its larger corded machines to the multi-awardwinning R260DCT-Li cordless disc cutter, the range delivers serious cutting capability without fuel, pull cords, exhaust fumes or petrol-engine servicing. The latest additions bring that experience into a more compact format. The new R150DCT and R150DCT-PRO are purpose-built 150mm electric disc cutters developed for paving, landscaping and masonry work. They fill the space between an angle grinder, useful for adjustments and shorter cuts, and a larger disc cutter built for deeper construction materials. For common slabs, flags and pavers, a grinder may provide limited depth and support, while a full-sized cutter can be more machine than the job requires. Evolution developed the R150DCT range around the materials tradespeople regularly buy and cut. Its 53mm maximum cutting depth covers the majority of common paving products and allows many slabs and tiles to be cut in a single pass.

E

and guides the cutter during longer cuts. Soft start and an electronic blade brake provide further control, while a 25mm port connects to a compatible dust extractor for appropriate dry cutting. Overload Protection provides real-time feedback when too much pressure is applied, helping the operator maintain an effective cutting rate. The R150DCT includes Evolution’s Endurance Diamond Blade, with 30 per cent more diamond than the Essential blade. The higher concentration helps it stay sharper for longer, supporting faster, more stable cutting and reducing bladechange downtime across concrete, brick, block and paving. For tradespeople who do not need integrated wet cutting, the R150DCT offers a compact alternative to an angle grinder or larger disc cutter.

Water control where it matters Early trade feedback has shown particular

Compact by design Both models combine a high-torque 1,600W motor with a balanced, twohanded layout. Separating the motor from the blade, the belt drive improves weight distribution and helps achieve a 53mm cut from a compact 150mm blade. A wheeled metal skid plate supports

I

54 NOVEMBER 2026 PROFESSIONAL BUILDER

interest in the R150DCT-PRO and its integrated water-suppression system. Dust control remains an important consideration when cutting concrete, paving and natural stone because these materials can release fine silica-containing dust. Water suppression does not remove the need for appropriate RPE, PPE and task-specific controls, but it provides a practical way to reduce dust at the point where it is created. The PRO adds dual-sided water delivery to the standard model’s core features. Water reaches both sides of the blade and the cutting area, helping control airborne dust while cooling the blade and material. A manual valve allows the operator to adjust the water flow at the tool. A universal hose connection and the required fittings are supplied, while the longer 3.5m cable adds working reach. This makes the PRO particularly useful for professional paving and landscaping


054_PB_NOV26_Layout 1 08/10/2026 14:32 Page 55

work requiring regular wet cutting and dust control.

Taking on porcelain paving The growth of porcelain paving presents another cutting challenge. Porcelain slabs are extremely hard and dense, but their brittle structure can leave the finished edge vulnerable to chipping when cut with an unsuitable blade or technique. Wet cutting becomes particularly valuable when working with porcelain. Delivering water to the cutting area helps control heat, clear debris and reduce stress around the cutting edge, supporting a cleaner finish and reducing the risk of chipping. A conventional segmented masonry blade is designed for aggressive material removal. While effective in concrete, brick and stone, it does not provide the fine, controlled cutting action generally required for a clean edge on porcelain. Evolution has therefore developed a separate 150mm Porcelain and Tile Diamond Blade for use across the

R150DCT range. Its continuous turbo mesh diamond rim creates a finer cutting action than a conventional segmented blade, while helping remove debris from the cut. A reinforced stabiliser ring helps resist blade flex and vibration, and its thin-kerf profile reduces cutting resistance and machine load. Although the Porcelain and Tile Diamond Blade can be used wet or dry with an appropriate cutting method, pairing it with the R150DCT-PRO provides the most complete Evolution setup for porcelain paving. The blade’s continuous turbo mesh rim delivers the fine, controlled cutting action required for dense porcelain, while the PRO’s dualsided water delivery helps manage heat, clear debris and reduce stress around the cutting edge. Together, these features help minimise chipping and produce a cleaner finished cut. The R150DCT-PRO is supplied with an Endurance masonry blade as standard. The Porcelain and Tile Diamond Blade is

YOU CAN WIN!

Win the New Evolution R150DCT-PRO 150mm Electric Mini Disc Cutter With Water Dust Suppression & Endurance Premium Diamond PLUS a 150mm Porcelain Diamond Mini Disc Cutter Blade. Bundle worth £189.96. To enter visit

WWW.RDR.LINK/BCF039

sold separately and should be fitted when cutting porcelain paving or tiles. The R150DCT and R150DCT-PRO are available directly from Evolution or through your preferred merchant. FOR MORE INFORMATION ON THE NEW EVOLUTION RANGE VISIT WWW.RDR.LINK/BCF040


056_PB_NOV26_Layout 1 08/10/2026 14:32 Page 56

tools & equipment

MAINTAIN & PROTECT Kevin Brannigan, Marketing Manager at Makita, explains how good tool and battery maintenance can help tradespeople get the best possible performance and longevity from their equipment ordless tools have come a long way in recent years, changing what professionals can expect from batterypowered equipment. Platforms such as Makita’s XGT® 40VMax system deliver high levels of power and extended runtime, enabling tradespeople to take on demanding applications without the restrictions associated with cables or petrol engines. Alongside improvements in performance, tool design has also evolved. Today’s cordless equipment can deliver considerably more power while remaining relatively compact, lightweight and well balanced. Reduced noise, fewer maintenance requirements and greater freedom of movement are further benefits for professionals working on site. However, investing in high-performance equipment is only part of the equation. Regular maintenance and responsible use are essential to ensure tools and batteries continue to operate efficiently.

C

Choose a compatible system Good tool maintenance starts with selecting equipment that has been designed to work together. Using tools, batteries and chargers from an integrated cordless platform ensures the individual components can communicate and operate as intended. Makita’s cordless systems, for example, incorporate communication between the battery, tool and charger during use and charging. This technology helps manage factors such as temperature, load and battery discharge, providing protection against conditions that could affect performance or shorten battery life. The charging process is also carefully controlled. Advanced chargers can monitor the condition of the battery and, where required, cool the battery pack before charging. Certain systems can also monitor individual cells to help maintain consistent performance.

Use genuine batteries When replacing batteries, cheaper alternatives may appear attractive, but opting for non-genuine products can ultimately result in higher costs. Manufacturer-approved batteries are developed and tested alongside the tools and chargers they are designed to power. They incorporate protection systems to help manage issues such as overheating, overcharging and excessive loads. Some third-party or counterfeit batteries may not provide the same level of protection or performance. This can result in shorter runtimes, inconsistent operation and, in some circumstances, overheating or premature battery failure. Poor-quality batteries can also potentially damage the tool they are being used with and may affect the manufacturer’s warranty. For this reason, tradespeople should source replacement batteries through reputable suppliers and check that products are genuine and approved for use with their equipment.

Follow the correct charging process The way a battery is charged can have a direct impact on its performance and service life. It is important to always use the charger recommended by the manufacturer, as it will be designed to provide the correct charging characteristics for the battery. Using an unsuitable or poor-quality charger may not provide the same level of monitoring and protection, potentially putting unnecessary stress on the battery. It is also worth avoiding the habit of

I

56 NOVEMBER 2026 PROFESSIONAL BUILDER


056_PB_NOV26_Layout 1 08/10/2026 14:33 Page 57

repeatedly running lithium-ion batteries completely flat. Recharging before the battery is fully depleted can help reduce unnecessary stress on the cells. As a general guide, recharging when around 20-30% capacity remains can help support battery longevity. Once charging is complete, batteries should also be removed from the charger unless the manufacturer’s charging system is specifically designed to manage extended connection safely.

Give tools some attention Battery maintenance is important, but the tool itself also needs regular care. Construction environments expose equipment to considerable amounts of dust and debris, which can accumulate around vents and other components. Keeping cooling vents and moving parts free from dust, plaster, masonry and wood debris can help maintain airflow and prevent excessive heat build-up. A quick clean after completing a job can therefore go a long way towards keeping

equipment operating efficiently. Tools should also be given a visual inspection before use. Look for damaged housings, guards, chucks, blade clamps and other components, and make sure any associated cables or accessories are in good condition. Accessories deserve particular attention. Worn drill bits, saw blades and grinding discs can make tools work harder than necessary, reducing efficiency and placing additional load on the motor. Replacing worn accessories promptly can therefore benefit both performance and tool life.

batteries should be kept in a clean, dry environment and protected from excessive heat and cold. This is particularly important for tradespeople who regularly leave equipment in vehicles. For batteries that won’t be used for an extended period, storing them at approximately 50% charge can help reduce stress on the cells. Protective cases and suitable storage systems can also help prevent impact damage while keeping equipment protected from dust and moisture.

Make maintenance part of the routine

Store tools with care

Maintaining cordless tools doesn’t have to be time-consuming. Simple habits such as cleaning equipment after use, checking for damage, storing tools correctly and using genuine batteries and chargers can all contribute to longer service life and reliable performance.

Exposure to moisture, direct sunlight or extreme temperatures can have an impact on batteries, electronics and other components. Where possible, tools and

TO FIND OUT MORE ABOUT MAKITA’S CORDLESS RANGE, VISIT WWW.RDR.LINK/BCF041


058_PB_NOV26_Layout 1 08/10/2026 14:33 Page 58

FLOORING

The Next-Gen Palio Rigid is helping builders capitalise on the flooring opportunity Flooring is fast becoming more than just the finishing touch on a renovation project. Whether it’s a kitchen refurbishment, bathroom upgrade or open-plan extension, homeowners are placing greater emphasis on what’s underfoot, creating new opportunities for builders and tradespeople to offer a more complete package and add value to renovation projects. Responding to this growing demand, Palio by Karndean has launched NextGen Palio Rigid, the latest evolution of its popular rigid core luxury vinyl flooring range. Designed specifically for the trade, the range combines the look of contemporary wood and stone designs with enhanced performance and simple installation, helping builders deliver highquality flooring solutions alongside wider renovation works. Palio by Karndean is the new name for Palio Trade by Karndean, continuing to provide builders and installers with a dedicated flooring brand available through builders’ merchants nationwide.

Flooring takes centre stage The new range arrives at a time when homeowner priorities are shifting. Research suggests homeowners are less willing to compromise on flooring quality. The number prepared to trade down on flooring to balance a budget has fallen from 11% to just 3% in the last three years, with quality and longevity now ranking above budget considerations. For builders, these findings reflect what many are already seeing on site. Homeowners increasingly view floor choice as a long-term investment that brings together kitchens, dining spaces and living areas while helping define the overall feel of a room. Flooring is no longer an afterthought. It’s becoming a central part of the renovation conversation.

The range comprises 20 contemporary designs, including 14 wood effects and six stone-inspired finishes. The range introduces popular design directions including character, rustic, limed and prime oak looks, alongside travertine and marble effects that reflect current interior trends. Standout wood designs include Tevere

Designed for today’s interiors Next-Gen Palio Rigid has been developed to help tradespeople meet those changing expectations.

I

58 NOVEMBER 2026 PROFESSIONAL BUILDER

Limed Oak, with its limed, brushed appearance and warm natural tones, and Lugano Rustic Oak, which combines subtle red undertones with authentic plank variation. For projects requiring a more traditional look, Tronto Character Oak delivers classic farmhouse appeal, while Trebbia Prime offers richer, darker


058_PB_NOV26_Layout 1 08/10/2026 14:34 Page 59

tones for contemporary interiors. Stone designs including Lesina Travertine and Idro Marble provide modern alternatives for customers looking to achieve a contemporary look in kitchens, bathrooms and utility spaces. “Responding to evolving design trends and customer expectations, we have collated a collection of beautiful wood and stone designs in a range of cool, neutral and warm shades to meet the widest selection of interior styles,” explains Scott Cochrane, VP of sales for Palio by Karndean. He adds: “The development of the range has been driven by both changing design preferences and the practical realities faced by the trade.”

Built for the realities of renovation While design is important, installation efficiency remains a priority for builders working to tight schedules. Next-Gen Palio Rigid features an improved PVC composition and reinforced mineral core, helping to increase stability and durability. Combined with a 2G™ click-locking system, the flooring has been designed for fast, straightforward installation, reducing time on site and helping keep projects on schedule. The product can also be installed over many existing surfaces, including ceramic tiles, without requiring a separate underlay. This can significantly reduce preparation time on refurbishment projects and help builders complete jobs more efficiently. In addition, the floor is designed to help mask minor subfloor imperfections, making it particularly suitable for renovation applications. “By improving the performance of our rigid core flooring and updating the designs with a collection of desirable colourways, we aim to offer our trade customers a refreshed solution that feels both familiar and exciting,” says Scott.

Ideal for kitchens and bathrooms As kitchens continue to evolve into the social hub of the home, flooring needs to perform across multiple demands. Recent research found that 62% of consumers consider the kitchen the heart of the home, while 60% like the idea of it

being the main social space within the property. With this in mind, Next-Gen Palio Rigid combines style with practical benefits. The flooring is fully waterproof, making it suitable for kitchens, bathrooms and utility rooms, while its 19dB acoustic performance helps reduce noise transfer to rooms below, making it particularly beneficial in family homes and upstairs applications. Larger-format planks and tiles also help create a seamless appearance throughout connected living spaces. Durability is supported by a 25-year residential warranty and a 10-year light commercial warranty, providing

reassurance for both installers and homeowners looking for long-term value.

Trusted trade channels For builders looking to broaden their offering, Palio by Karndean is available through a growing network of national and independent merchant partners. Supported by merchandising, product training and inbranch displays, the network is designed to make specifying and purchasing flooring as straightforward as possible for busy tradespeople. By making flooring available through established trade channels, Palio by Karndean enables builders to source products alongside their wider materials package, helping to streamline procurement and keep jobs moving efficiently. With homeowners increasingly investing in quality finishes and viewing flooring as an integral part of the overall design, the category represents a growing opportunity for builders. Combining contemporary wood and stone designs, practical on-site benefits and easy access through the merchant channel, Palio by Karndean helps tradespeople meet growing demand for high-performing flooring and deliver a more complete renovation package. THE FULL PALIO BY KARNDEAN RANGE CAN BE EXPLORED AT WWW.RDR.LINK/BCF042

I

PROFESSIONAL BUILDER NOVEMBER 2026 59


060_PB_NOV26_Layout 1 08/10/2026 14:34 Page 60

WETROOMS

WET, WET WET

Wetrooms continue to gain popularity across both residential and commercial projects, driven by demand for contemporary aesthetics and improved accessibility. As specifications evolve, however, increasing attention is being paid not only to the finished appearance of a wetroom, but also to its long-term performance. Historically, traditional ceramic and porcelain tiles have been the default wall finish. Whilst most tiles are a durable and water-resistant surface, the waterproof performance of a tiled installation relies on the underlying waterproofing system. Tile surfaces repel water; however, grout lines and natural stones are typically porous and can let moisture pass through. As a result, there is a clear and growing shift towards utilising waterproof wall panels as part of a fully integrated wetroom system. This shift reflects a wider move towards systems that simplify installation, improve durability, and reduce lifecycle maintenance. A successful wetroom should always be viewed as a complete waterproofing system rather than a collection of individual products. Wall finishes and sealing details are key contributors to the long-term integrity of the installation. Selecting wall panel systems that benefit

I

Fibo makes the case for modern waterproof wall panels from an enhanced moisture barrier with high-quality, polymer-based sealant is vital for superior waterproofing and longevity.

Material selection Material selection also plays an important role in maintaining hygiene. Wall panels that incorporate antibacterial properties with minimal joints can help to reduce the accumulation of bacteria, mould, and soap residues, making them particularly suitable for healthcare, hospitality, and high-use residential environments. When correctly specified and installed, a wetroom provides continuous waterproof protection throughout the room, reducing the number of potential weak points and providing reliable functionality.

60 NOVEMBER 2026 PROFESSIONAL BUILDER

Tiles continue to offer an attractive and durable decorative finish, but it is important to recognise the limitations of traditional tiling, particularly when considering long-term performance, maintenance requirements, and the overall durability of the installation. Traditional tiles and grout are typically water-resistant rather than waterproof, and there is a key distinction: water-resistant materials slow the passage of moisture but do not prevent it entirely. Over time, water can migrate through grout joints and, in some cases, through the tile body itself until it reaches the substrate beneath. By comparison, waterproof materials, such as Fibo wall panels, are designed to prevent moisture transmission.


060_PB_NOV26_Layout 1 08/10/2026 14:34 Page 61

Tiled installations also involve multiple, lengthy processes including substrate preparation, waterproofing, adhesive application, tile fixing, grouting, and curing. These extend installation programmes and increase dependency on site conditions, with temperature and humidity often influencing curing times. Hygiene and maintenance are also less than optimal with traditional tiling installations. Bathrooms are environments high in moisture and humidity and require regular cleaning, so durability needs to be absolute. Over time, grout becomes stained and promotes mould growth, which requires more maintenance to remove and uphold both aesthetic appearance and hygiene standards. With the implementation of new legislation around healthy homes, this is particularly pertinent to social landlords. Material choice in high humidity areas is now central to safety, compliance and longterm performance. There has been a significant increase in utilising waterproof wall panels in wetroom specifications, and this shift has been driven by the need to simplify installation whilst maintaining long-term performance.

Simple installation Unlike individual tiles, wall panels cover substantial areas with minimal joints, reducing both installation time and the number of areas requiring ongoing maintenance. The elimination of individual tile fixing and grouting means fewer individual components, therefore reducing labour requirements and curing times, allowing projects to progress more quickly. Installation of wall panels instead of traditional tiles also reduces the likelihood of future maintenance callbacks, protecting building contractors’ brand reputation, as well as saving contractors’ time and the associated financial costs with call-backs. Suitable for both new-build and refurbishment projects, utilising wall panels provides a reliable and efficient solution to specifying a wetroom. With the ability to install wall panels over existing tiles, completion time is drastically accelerated with fewer snagging issues and the same reliable, watertight finish on

refurbishment projects as on new-build projects. The smooth, non-porous surfaces of wall panels are more hygienic and require less maintenance than tiles, while the absence of extensive grout lines reduces the opportunity for mould and bacterial growth. Some high-quality panels, like those offered by Fibo, incorporate antibacterial surface technologies to further support hygiene. Practical considerations extend beyond the installation itself. Wall panels are significantly lighter than the equivalent tiled finish, making them easier to transport, handle and install, while reducing the likelihood of damage during delivery and on-site handling. As wetroom design continues to evolve, greater emphasis is being placed on complete system performance rather than the appearance of the finished surface alone. Tiles remain an established decorative

solution when installed over a correctly designed waterproofing system, but their performance is dependent on all the components working together and requires extensive upkeep and maintenance over their lifespan. Modern waterproof wall panels offer an alternative approach by combining the decorative finish with a waterproof surface, while also reducing installation complexity and ongoing maintenance. For specifiers, contractors, and installers, material selection is increasingly about improving efficiency and delivering durable installations with confidence. With wetroom requirements and expectations prioritising long-term performance alongside aesthetics, waterproof panel systems are becoming an increasingly important part of modern wetroom specification. FOR FURTHER INFORMATION ON FIBO VISIT WWW.RDR.LINK/BCF043

I

PROFESSIONAL BUILDER NOVEMBER 2026 61


062_PB_NOV26_Layout 1 08/10/2026 14:35 Page 62

ROOFING

SETTING THE STANDARD Kevin Taylor, Training and Technical Support Manager at Marley, highlights five key areas to help ensure work meets BS 5534: Slating and tiling for pitched roofs and vertical cladding For roofing contractors working on newbuild housing, social housing and local authority projects, or those operating under formal contracts and specifications, understanding BS 5534: Slating and tiling for pitched roofs and vertical cladding is essential. The standard provides guidance on how pitched roofing should be designed and installed, and its requirements are often reflected in project specifications, manufacturers’ fixing instructions and National Building Specification (NBS) documentation. For roofers who mainly work on smaller or less formally specified projects, however, some of the practical requirements can be easy to overlook. While BS 5534 is not, in itself, legislation, it can become a contractual requirement when it is referenced in a specification or contract. In the event of a dispute, the standard may then be used to assess whether the work was carried

I

out correctly, alongside the relevant manufacturer’s instructions. It is therefore important contractors understand where common mistakes can occur. Here are five areas where greater attention can help avoid remedial work, delays and potential disputes.

1

GETTING UNDERLAY DRAPE AND LAPS RIGHT One of the most common issues is the way roofing underlay is installed. BS 5534 requires unsupported underlay to be installed with a slight drape between the rafters. This allows water entering the roof construction whether from wind-driven rain or condensation to drain away from batten nail holes and towards the eaves and gutter. The key is to avoid installing the underlay tight between the rafters. At the same time, excessive drape should also be avoided. A drape of no more than 15mm is generally recommended to

62 NOVEMBER 2026 PROFESSIONAL BUILDER

prevent the membrane from lifting under wind loading and meeting the underside of the slates or tiles. As a simple site check, contractors can test the drainage path by carefully pouring a small amount of water onto the membrane from the ridge and checking that it flows towards the eaves, behind the battens.

2

CHECKING BATTENS AND THEIR FIXINGS Roofing battens are another area where seemingly minor shortcuts can create significant problems. Battens used within the scope of BS 5534 should be appropriately graded and marked to demonstrate compliance. The marking confirms the timber has been assessed for characteristics such as knots, slope of grain and wane, helping to ensure it is suitable for roofing applications. Common UK sizes include 25mm x 50mm battens, generally used for interlocking tiles and slates, and 25mm x 38mm battens, commonly used for plain tiles. Fixings also need attention. The appropriate nail size and specification should be checked against BS 5534 and,


062_PB_NOV26_Layout 1 08/10/2026 14:36 Page 63

importantly, the roofing manufacturer’s requirements. Where nail guns are used, contractors should confirm the nails being fired are suitable for the particular application. The advice is simple: check the batten marking and fixing specification before installation rather than waiting for an inspection to identify a problem.

3

MECHANICALLY FIXING BEDDED RIDGE AND HIP TILES A traditional mortar-bedded ridge or hip may look perfectly secure, but installers need to understand the requirements where work is expected to comply with BS 5534. Bedded ridge and hip tiles should be mechanically fixed, with two fixings per unit where required. Depending on the system, this can involve screws and washers or clips, with the precise method confirmed against the manufacturer’s instructions. If a traditional mortar-only finish is required for aesthetic, heritage or other project-specific reasons, this should be established with the client and

documented before work begins. Otherwise, an installer could find themselves having to remove and reinstall completed work to meet the specified requirements.

4

5

PROTECTING THE MEMBRANE AT THE EAVES The bottom edge of the roofing membrane is particularly vulnerable to ultraviolet (UV) exposure. Historically, installers commonly allowed the bottom row of felt or underlay to extend into the gutter. However, many modern roofing membranes are not designed for prolonged exposure to UV radiation. Over time, exposed material can deteriorate and potentially compromise drainage. The membrane should therefore discharge onto an appropriate UV-stable carrier, such as a suitable felt or plastic support tray, rather than being left exposed. This is an area worth checking during installation because correcting it after the roof has been completed can involve unnecessary remedial work.

CHOOSING COMPLIANT DRY-FIX SYSTEMS Finally, installers should take care when selecting dry verge, ridge and hip systems. Where BS 5534 compliance is required, the relevant dry-fix products should conform to BS8612. This standard covers the performance of dry-fixed roofing products and helps demonstrate that systems have been appropriately tested for factors including fixing performance, durability and drainage or ventilation characteristics where applicable. Cheaper, untested alternatives may appear attractive at the point of purchase, but the cost saving can quickly disappear if a system subsequently fails an inspection and needs to be removed and replaced. When in doubt, check the product’s compliance with the merchant or manufacturer before installation. FOR FURTHER INFORMATION ON MARLEY VISIT WWW.RDR.LINK/BCF044

“For roofing contractors working on new-build housing, or those operating under formal contracts and specifications, understanding BS 5534: Slating and tiling for pitched roofs and vertical cladding is essential”

I

PROFESSIONAL BUILDER NOVEMBER 2026 63


064_PB_NOV26_Layout 1 08/10/2026 14:37 Page 64

builders’ vehicles

top of the trucks PB explains what the KGM Musso Rhino is doing right It seems the longer we drive the KGM Musso Rhino around, the more compliments we get from members of the public, usually tradies and fellow van drivers themselves. The most recent of which was perhaps one of the more insightful and came from someone currently looking to upgrade their current workhorse. During his research, this tradesman had obviously come across the new KGM Musso Rhino and so when we parked up next to each other at our local shopping centre on the weekend, he noticed it and commented that it was the new 2026 version. He went on to explain why it had caught his eye when researching a new work vehicle online: improvement. Whilst KGM (formerly SsangYong) is certainly not a new entrant to the LCV game, the brand’s reputation has grown exponentially in the past few years. The premium high-end players in the LCV market have been long established, but it feels as though a shift is coming. You only have to look at the general vehicle market to see this change in full effect. There has been a meteoric rise in

I

new players there. Just look at how many Jaecoo’s grace our roads now. Even Tesla itself went from being a bit of a gimmick vehicle manufacturer to the most valued in the world now. Increasing amounts of newer manufacturers, particularly from Asia, are hitting the scene running (or wheeling), often running on a lower price premium, whilst still providing ample bang for your buck. How does this translate to the commercial vehicle market? Well, it seems to be following close behind. While the

64 JULY/AUGUST 2026 PROFESSIONAL BUILDER

most popular mainstays like the Transit aren’t going anywhere yet, the advent of the EV and increasingly stretched budgets are providing ample opportunity for the ‘white van man’ to switch allegiances. Makes like Farizon and KIA have burst onto the scene and brands that were less well-known seem to be getting an increasing amount of recognition. KGM is squarely in this field. A longstanding brand as Ssangyong, the rebranded name has brought with it


064_PB_NOV26_Layout 1 08/10/2026 14:39 Page 65

increases in quality and prestige that is making it harder to ignore. Where once before it was treated as the simple and practical option for pick-up drivers. There’s a greater argument that the level of ‘premium-ness’ you get with say a Musso Rhino (the latest in the range), gets you far better value for money than like for like vehicles. For under £40,000 you’re getting a premium cab with all the trimmings you could ever want plus a 5-year /100,000 mile warranty. Fancy infotainment screens, a nice blend of analogue and digital with physical air conditioning dials, all round cameras and a host of safety features. It’s all there really. Don’t let this fool you into thinking it’s come at the expense of practicality though. The beauty in KGM’s latest addition is in its ability to do both and the premium upgrades haven’t let usefulness fall to the wayside.

Practical prowess I’d recently taken some time off to finish odd bits and bobs around the house. One of the jobs added to my list by my better half was to install some acoustic wall panelling in her office room. This was a nice way to see how practical it would be

to load up the bed with something awkwardly long (at 2.4m), with 5 of the panels needing to fit in the back. A bit of stacking was involved and some elaborate tying down using the 8 tie down points situated in the bed. Particularly fiddly given the panels more delicate nature, meaning restraining straps wouldn’t suit. Whilst not particularly heavy, the added bulk in the bed felt incredibly natural in the back. What was even more

“The rebranded name has brought with it increases in quality and prestige that is making it harder to ignore”

useful about the Rhino though is the added back steps. These mean you’re not stepping on the back bumper if you need to get in the back without opening the tailgate. (As was here, with the panels propped up against the inside face of it.) It certainly made life unloading a lot easier. The roll bars on the side made this job of tying down even easier too and just add something else to tie down to or hold on to when working in the back. These represent just one of the many accessories available through KGM. Every user is going to want something slightly different from their vehicle. And while the basic package of the Rhino is rather encompassing, there may be added bits that would suit the individual user. The roll cover supplied with this one I’ve been driving about in is a great example that while not necessary for everyone is a great nice to have. There’s also a range of other options, including commercial backs, different frames, roof bars and all the rest. The fact is, every driver is going to want something different from their work vehicle. The real benefit of the Rhino is its ability to function both as a leisure vehicle and a functional bit of kit, at a really reasonable price. How much is a familiar badge really worth? FOR MORE INFORMATION ON KGM VISIT WWW.RDR.LINK/BCF045

I

PROFESSIONAL BUILDER NOVEMBER 2026 65


PB.PMM page and ad grid_Layout 1 08/10/2026 18:52 Page 3

trade media product round-up

SYSTEM CALCULATOR The Ecological Building Systems System Calculator guides users through a series of simple questions about the existing construction and the desired upgrade to build a complete wall, roof, floor or loft system rather than selecting individual products in isolation. As each answer is selected, the system automatically generates a specification tailored to the selected project requirements. GET MORE DETAILS AT: WWW.RDR.LINK/BCF047

APP The TechBox from Grant UK is an app where heating professionals can download current and archived manuals and technical resources for all Grant products. The design of the TechBox has been updated with the introduction of new imagery, icons and colour scheme, an improved search function, and a ‘share’ option that allows users to share PDFs from the TechBox via email, text and WhatsApp. GET MORE DETAILS AT: WWW.RDR.LINK/BCF049

FLAT GLASS CONFIGURATOR TOOL

AI VISUALISATION TOOL

Keylite has partnered with Data Yard to publish structured product data, including compliance data relating to the Building Safety Act and the newly updated Future Homes Standard. The platform offers housebuilders and specifiers access to comprehensive data completeness and standardisation reporting, helping them understand current and future product information requirements. GET MORE DETAILS AT: WWW.RDR.LINK/BCF048

Designed specifically for Guardian Warm Roof installations, this AI Visualisation Tool enables installers to create realistic visualisations of the finished structure before any construction work begins. By helping their customers clearly see the potential transformation of their conservatory, the tool supports more confident decision-making and a more engaging sales process. GET MORE DETAILS AT: WWW.RDR.LINK/BCF050

ADVERTISEMENT INDEX Here is a useful summary of all the adverts that appear in this issue of Professional Builder. Each is listed with its page number and a direct URL that will get you straight to the relevant online information Barrettine Group.............................................................. (page 12) www.rdr.link/BCF120

Makita (UK) Ltd................................................................ (page 44) www.rdr.link/BCF132

Buckbootz ...................................................... (inside front cover) www.rdr.link/BCF121

Marley Ltd ........................................................................ (page 53) www.rdr.link/BCF133

Carhartt UK Ltd .............................................................. (page 55) www.rdr.link/BCF122

PB Weekly .................................................................. (back cover) www.rdr.link/BCF134

Eclisse Uk Ltd .................................................................. (page 19) www.rdr.link/BCF123

SFA Saniflo UK Ltd.......................................................... (page 36) www.rdr.link/BCF135

Evolution Power Tools.................................................... (page 47) www.rdr.link/BCF124

Soprema UK Ltd ...................................................... (pages 28,29) www.rdr.link/BCF136

Federation of Master Builders Ltd ................................ (page 21) www.rdr.link/BCF125

Tarmac PLC /Blue Circle ................................................ (page 24) www.rdr.link/BCF137

Helly Hansen UK Ltd ........................................................ (page 5) www.rdr.link/BCF126

Toolfair ............................................................................ (page 50) www.rdr.link/BCF138

Keypoint Industrial Solutions UK .................................. (page 31) www.rdr.link/BCF127

SawStop/TTS Europe SE................................................ (page 57) www.rdr.link/BCF139

KGM Motors UK Ltd ........................................................ (page 39) www.rdr.link/BCF128

VIP Polymers Ltd ............................................................ (page 33) www.rdr.link/BCF140

Kingspan Insulation Ltd ................................................ (page 27) www.rdr.link/BCF129

Vortex .............................................................................. (page 26) www.rdr.link/BCF141

Made for Trade ................................................................ (page 15) www.rdr.link/BCF130

Wavin Ltd............................................................................ (page 6) www.rdr.link/BCF142

Made for Trade .......................................................... (pages 16,17) www.rdr.link/BCF131


IBC_PB_NOV26_Layout 1 08/10/2026 14:42 Page 67

GOOD HEALTH NO. 83 IN THE SERIES

ALL SHOOK UP Recently at work, I had a joiner come in and see me. We discussed the risky parts of his job, like using vibrating tools, and considered if this could be related to his symptoms. I was very pleased to hear he was aware of the risks and that the equipment he used at work was appropriately labelled with warnings regarding use. However, he then went on to say that the advice was never followed, and that management just wanted the job done. There may always be pressure to deliver a job on time, but there can also be serious health costs associated with not following safety advice, even years down the line. The guidance and legislation (The Control of Vibration at Work Regulations 2005) is there to be followed in the workplace to protect you, the worker. Not following this may lead to fines or potentially legal action against employers. So, let’s have a think again about HAVS. Hand–Arm Vibration Syndrome is a painful and permanent condition directly related to long-term use of vibrating power tools and machines. It causes irreversible damage to the blood vessels, nerves and joints of the arm, wrist and hand. There may be no early signs while the damage is happening in the early stages, it may get worse over a longer time. The symptoms to look out for include: Numbness or tingling in your fingers Loss of sensation (feeling) in the fingertips Loss of hand strength – becoming weaker or less able to hold heavy objects Colour changes in your fingers when they get cold or wet (from normal to white to red with a painful recovery phase – known as vibration white finger)

• • • •

These early signs are really important to be aware of so activity can be modified. If they are ignored and vibration exposure

IN THIS MONTH’S COLUMN, WE RETURN TO A HEALTH AND SAFETY TOPIC – HAND-ARM VIBRATION SYNDROME (HAVS)

• • • • •

“If you are concerned about having symptoms of HAVS, you need to speak to your employer and seek medical review via occupational health or via your GP. This is a serious condition which, if not recognised, has permanent effects” continues, the signs may become more severe and permanent. Loss of sensation in the fingertips creates many challenges for fine motor activities like picking up small objects like nails or even putting on work clothes with buttons or zips. Vibration white finger may affect several fingers causing significant pain and cause problems using your hands day to day. Some people are at more risk than others of HAVS. The risk comes with regular use of hand-held or hand-guided power tools, as well as equipment that vibrates as they are processed by powered machinery, such as: Concrete breakers/ pokers Sanders, grinders, disc cutters Hammer drills

• • •

Chipping hammers Chainsaws, brush cutters, hedge trimmers Powered mowers Scabblers or needle guns Pedestal grinders

So how much vibration is too much? HAVS may be seen if you regularly operate: Hammer action tools for more than about 15 minutes a day; Some rotary and other action tools for more than about one hour a day. The 2005 regulations outline the limits of safe practice for use of vibrating tools. The risks of using these tools can be minimised by ensuring low vibration tools are first line, that equipment is well maintained and has no faults that could lead to increased vibration and that cutting equipment is kept sharp so it is efficient and used for the shortest time needed. Workers have the right to ask for alternative ways to do jobs, to avoid the use of vibrating tools if possible. Taking regular breaks from using these machines, switching to other tasks between uses and ensuring they are operated without maximum grip strength can also help protect against HAVS. If you are concerned about having symptoms of HAVS, you need to speak to your employer and seek medical review via occupational health or via your GP. This is a serious condition which, if not recognised, has permanent effects. Don’t be afraid to speak up – your health is worth protecting. You may need to be the one to drive change for yourself and for others at work. FOR MORE INFORMATION ON HAND-ARM VIBRATION SYNDROME (HVAS) VISIT WWW.RDR.LINK/BCF051

I

PROFESSIONAL BUILDER NOVEMBER 2026 67


OBC_PB_NOV26_Layout 1 08/10/2026 14:43 Page 1

(3;203%( 3%( 396 2); %44 ); % %44 HI QEKE^MRI *VSQ XLI 9/ 9/ W JEZSYVMXI XVEHI QEKE^MRI W JEZSYVMXI XVEH 4VSJIWWMSR REP &YMPHIV ;IIOP]] FVMRKW ]SY EPP 4VSJIWWMSREP &YMPHIV ;IIOP] FVMRKW ]SY EPP XLI IS HIQSW XLI PEXIWX TVSHYGX RI[W ZMHIS HIQSW PEXIWX TVSHYGX RI[W ZMHI T ]SY WXE] MHIEW MHIEW ERH KMZIE[E]W XS LIPT ]SY WXE] ERH KMZIE[E]W XS LIPT ELIEH ELIEH SJ XLI KEQI =SY GER RS[ EGGIWW SJ XLI KEQI =SY GER R RS[ EGGIW 4VSJIWWMSR REP &YMPHIV ;IIOP]] IZIR IEWMIV 4VSJIWWMSREP &YMPHIV ;IIOP] IZIR IEWMIV XLER TT XLER FIJSVI [MXL SYV RI[ ETT FIJSVVI [MXL SYV RI[ ET

ˉʼʷʸ˂ ˅ʸˉʼʸˊˆ ˉʼʷʸ˂ ˅ʸˉʼʸˊˆ ʴˁʷ ʻ˂ˊʠˇ˂ˆ ʴˁʷ ʻ˂ˊʠˇ˂ˆ

ʺʼˉʸʴˊʴˌ ʺʼˉʸʴˊʴˌ ˁ˂ˇʼʹʼʶʴˇʼ˂ˁˆ ˁ˂ˇʼʹʼʶʴˇʼ˂ˁˆ

ʴ˃˃ ʸˋʶʿˈˆʼˉʸ ʴ˃˃ ʸˋʶʿˈˆʼˉʸ ʶ˂ˀ˃ʸˇʼˇʼ˂ˁˆ ˂ˀ˃ʸˇʼˇʼ˂ˁˆ ʶ

.3-2 8,) .3-2 8,) 4 463*)77-32%0 63*)77-32%0 & &9-0()6 9-0()6 ' '31192-8= 31192-8= SCAN THE QR CODE TO DOWNLOAD TODAY!

JĴĴĢ ĆĴŇ ī÷ ɢ


Turn static files into dynamic content formats.

Create a flipbook
Professional Builder November 2026 by Hamerville Media Group - Issuu