Professional Builder November 19

FRE E TO THE TRA DE

Professional BUILDING ■ FLOORING ■ PLUMBING ■ ROOFING ■ CARPENTRY ■ PAINTING AND DECORATING ■ THE BUSINESS MAGAZINE FOR THE BUILDING INDUSTRY

NOVEMBER 2019

VEHICLES & PLANT DRIVING AMBITIONS

PRO BUILDER

PLUMBING & WETROOMS ‘WETTING’ THE APPETITE FORD’S NEW RANGER RAPTOR IS MAKING QUITE A SPLASH AS IT LEAVES A TRAIL OF RIVAL PICK UPS IN ITS WAKE.

contents

Total Average Net Distribution 119,884 1 January 2018 – 31 June 2018

NOVEMBER 2019 VOL. 41 NO.10 @PB_mag

REGULARS 9 11 14 17 20 34 95 96 97 97

Editor’s Viewpoint News Letters Tool Theft For Old Times’ Sake Free-for-All Digital Digest The Doctor’s Advice Trade Media Wise Howell

Professional Builder, Regal House, Regal Way, Watford, Herts, WD24 4YF.

www.youtube.com/protrademags

pb@hamerville.co.uk

FREE FOR ALL! In it to win it... page 34 see

BUSINESS SOLUTIONS 32 Estimating with Build Aviator

HEATING, PLUMBING & WETROOMS

22

SPECIAL REPORTS 22 Builder Profile: FMB Award Winner 28 A Look at the Mental Health First Aid Programme

PRODUCTS & BUILDING MATERIALS

36 Nest: Smart Home Technology 39 Ariston Electric Water Heaters 43 Pendock Pipe Boxing 47 Wall Fixing System 48 Geberit: Press-Fit Plumbing 50 Jung Pumpen 53 Hep2O: Benefits of UFH 54 New Products

75 General Building Products 84 Rockwool: Insulating Timber Frame Buildings 86 Cupaclad Slate Cladding System 89 BMI History: The Swinging Sixties 90 Marley: Get the Slate-Look 92 In the Boardroom with Norbord 93 Safeguard Top Trumps 94 Quickslide: Securing Properties Over Winter

66

TOOLS, EQUIPMENT & WORKWEAR

Professional

81

INVENTORS CORNER

25 Meet the Sneedleprop

TRAINING&

UPSKILLING 30

BMI’s Roofing Training Courses

90

VEHICLES & PLANT 57 58 61 63 64 66 69 71 72

Honest John’s Guide to eBay Ford’s New Pick-Ups Fiat Ducato Ssangyong: Behind the Wheel Ingimex: Customising Volkswagen Vans JCB’s Compact Dumper Tufftruk Conveyors & Powered Barrows Cat’s Mini-Excavators New Products

76 Tools & Equipment Round-Up 78 Toolbank’s Real Deals for You 81 Festool’s Single Drill Technology 82 Makita Tech Talk

I

PROFESSIONAL BUILDER NOVEMBER 2019 3

MANAGING EDITOR TERRY SMITH EMAIL: tsmith@hamerville.co.uk

viewpoint

DEPUTY EDITOR LEE JONES EMAIL: ljones@hamerville.co.uk ASSISTANT EDITOR KIERAN NEE EMAIL: pb@hamerville.co.uk GROUP ADVERTISEMENT MANAGER CRAIG JOWSEY TEL: 07900 248102 EMAIL: craig@hamerville.co.uk NORTHERN ADVERTISEMENT MANAGER IAN DUFF MOBILE: 07810 353525 EMAIL: ian@hamerville.co.uk REGIONAL ADVERTISEMENT MANAGER SAM SHANNON TINSLEY MOBILE: 07554 013302 EMAIL: stinsley@hamerville.co.uk GRAPHIC DESIGNER DONNA BOOTH GROUP PRODUCTION MANAGER CAROL PADGETT PRODUCTION ASSISTANT CLAIRE SWENDELL DIGITAL MANAGER LUCY DIXON EMAIL: ldixon@hamerville.co.uk DIGITAL ASSISTANT JASMINE SMITH EMAIL: jsmith@hamerville.co.uk DISTRIBUTION MANAGER KARL CLARK PUBLISHER BRYAN SHANNON PRINTED BY WALSTEAD PETERBOROUGH PUBLISHED BY HAMERVILLE MEDIA GROUP Regal House, Regal Way, Watford, Herts WD24 4YF Tel: (01923) 237799 Fax: (01923) 246901 Email: pb@hamerville.co.uk

Professional Builder is a business magazine for firms and individuals involved in all aspects of the building industry. It is available nationally – free to the trade through leading builders’ merchant outlets. © 2019 To be removed from this magazine’s circulation, please call 01923 237799 or email circulation@hamerville.co.uk.

Subscriptions to Professional Builder are available at the following rates: UK: 1 year (11 issues) – £30.00 post paid Europe & Overseas: 1 year (11 issues) – £50.00 post paid Airmail: 1 year (11 issues) – £65.00 post paid

Shock and awe!

There have surely been many moments in all our lives when we have wanted to take the law “into one’s own hands”, and builders, at the sharp end of a myriad of difficult customers and dodgy payers, are probably more exposed to such thoughts than most. It goes without saying that we were not alone in offering a silent cheer a few years ago when a small contractor made national headlines by taking a sledgehammer to a customer’s recently erected porch when they refused to pay the bill.

Surprisingly, perhaps, such incidents are a real rarity. Very few victims actually have the bravery, conviction or, indeed, blood boiling anger to go through with such intentions, but exceptions to the rule are always guaranteed to stop us in our tracks. Step forward then Ray Taylor, who has had the courage of his convictions to try and deter the sneak tool thieves that have made his life, and those of many other innocent hardworking professionals, a misery in recent times.

Having been the victim of over £5,000 worth of tool theft from his van over a two-year period, Ray, 61, an electrician from “The actions of one individual Wolverhampton, decided he’d put his skills to have finally laid bare the good use by wiring his van so that a 1,000V shock would greet any potential chancers. shocking truth behind the tool What’s more, they’ll also set off a siren and two theft epidemic.” fire alarm-like sound bombs at the same time.

The device consists of a 1,000V zapper from a fly swatter, which is fitted to a metal plate in the rear door handle of Ray’s white Citroen Dispatch. It means the shock is isolated to the handle and the rest of the van is not live. The siren, sound bombs, zapper and a strobe light are on the same circuit, which is fitted to a switch in the cabin.

The switch is connected to the rear door key. Whilst the van is locked if someone tries to pull at the handle it activates. Sensors fitted to all the van’s doors also trigger the circuit.

And the best part of it all? The police have also confirmed that Ray is doing nothing illegal by having the device fitted, as long as he continues to include a yellow warning sign under the handle that states: “Danger, Live Terminals”.

Given the strength of feeling surrounding this issue reflected in our increasingly crowded inbox and letters section we are pretty sure you’d all like to join us in saying a big ‘well done’ to Ray for both the ingenuity of his invention and the savvy to ensure he’s not breaking the law by utilising it. The real question here is why someone like Ray has been forced to take such measures to protect his livelihood from the undesirables that continue to profit from the sale of stolen tools. The answer, of course, is that the authorities still haven’t enforced strong enough deterrents to stop thieves from having their cake and eating it, so often there is no choice but to take action from within, and that is exactly what Ray has done on this occasion.

Good on him, but perhaps that is where we should now draw the line? We certainly wouldn’t condone any builders harbouring ideas of emulating the ancient Egyptians, who went to great lengths to ensure their most precious treasures remained safe from the attentions of the ancient grave robbers by creating increasingly ingenious blood curdling booby traps within the structure of the tombs. But then again, as one wag in the office pointed out, judging by the mind boggling number of defects now occurring in new properties these days, perhaps the big house developers have already got there first.

I

PROFESSIONAL BUILDER NOVEMBER 2019 9

email your news to us at pb@hamerville.co.uk Tel 01923 237799

News Professional Builder

Take it to the top Parliament urged to act as tool theft campaign reveals one in three tradespeople fall victim.

VAT’s vat Reverse charge VAT WAS due to come into force for the construction industry from 1st October 2019.

The Government has now announced the delay, stating that: “Industry representatives have raised concerns that some businesses in the construction sector are not ready to implement the VAT domestic reverse charge for building and construction… To help these businesses and give them more time to prepare, the introduction of the reverse charge has been delayed for a period of 12 months until 1st October 2020. This will also avoid the changes coinciding with Brexit.”

The move has been described by the Federation of Master Builders as a ‘victory for common sense’.

Brian Berry, Chief Executive, said: “I’m pleased that the Government has made this

sensible and pragmatic decision to delay reverse charge VAT until a time when it will have less of a negative impact on the tens of thousands of construction companies across the UK. “What’s required now is for the Government and industry to work together to deliver a sector-wide communications campaign, which must include plain English guidance on the changes. We also want to work with the Government to deliver workshops aimed at construction employers, held in locations across the country, to explain what’s happening and why.” www.rdr.link/BJ001

onwards and upwards The Government’s recent planning announcements have elicited a strong response from industry figures.

Responding to the Government’s announcement that developers will be able to convert commercial buildings into homes without planning permission, the Local Government Association’s planning spokesman, Cllr David Renard, said: “Councils are committed to building the homes the country desperately needs.

However, it is vital the planning process is allowed to do its job, by making sure that homes are built in the right places, are affordable to those who need them and are supported by the right infrastructure.

He continued: “Permitted development rules take away the ability of local communities to shape the area they live in, ensure homes are well-designed with the necessary infrastructure in place and have resulted in the potential loss of thousands of affordable homes, as developers are not required to provide any affordable housing.”

Simply Business has launched a campaign to Stamp Out Tool Theft once and for all, after research reveals over one in three tradespeople have had their tools stolen, costing a combined average of £3,005 each. The insurer is calling for greater fines for perpetrators, as well as tighter regulations on the used tool market. A petition has been launched with the aim of attracting 100,000 signatures for the measures to be debated in Parliament. www.rdr.link/BJ002

Shocking News Electricity breaches up 31 per cent on construction sites.

Responding to the announcement that builders will soon be able to add up to two storeys without planning permission, Arshad Bhatti, Chief Executive of Apex Airspace, commented: “We need to raise our ambitions, something that rooftop development allows us to do, quite literally.

Adding storeys does not mean the UK’s urban centres will be littered with monstrous skyscrapers. Rather, airspace development will deliver much-needed new homes to people who suffer at the hands of a lack of affordability, lack of choice, poorly designed homes and long commutes.” www.rdr.link/BJ003

The Building Safety Group has reported a 31 per cent increase in the number of electricity breaches occurring on construction sites, based on 20,000 independent site inspections comparing the first six months of 2018 with the same period during 2019. The most common types of infringement included damaged and trailing cables as well as the temporary position of impermanent supplies around the site. www.rdr.link/BJ004

I

PROFESSIONAL BUILDER NOVEMBER 2019 11

Professional Builder

News Martin Warnes, from Essex, has been crowned the 2019 UK Plumber of the Year. The 2019 competition saw over 400 plumbers enter from across the country, with Martin taking not only the crown but also the £15,000 prize pot.

A judging panel made up of experts shortlisted 10 plumbers across the UK based on their skills, qualifications and experience. The top 10 then went headto-head to win public votes where the five individuals with the highest number of votes went through to the final stage.

Martin has been a plumber since 2007, starting out as a local apprentice to becoming self-employed in 2009 as the owner of M L Warnes Plumbing & Gas Services. He has expanded his business with four other plumbers on the books, plus two kitchen fitters, three office staff and a kitchen designer.

Speaking of his win, Martin said: “I’m thrilled to have been crowned the UK Plumber of the Year 2019, I still can’t believe I’ve actually won!

I absolutely love what I do and this is just the icing on the cake.” www.rdr.link/BJ005

Card Sharp How badly does the construction industry need a licensing scheme?

The NFB has weighed into the debate.

The National Federation of Builders has questioned the newly proposed licensing scheme targeted at tackling shoddy building work and poor business practice, arguing that the construction sector is already one of the most highly regulated sectors. This encompasses client contracts as well as planning, building, health and safety, environmental and financial regulations.

To work in practice, any licensing scheme will be required to be mandatory and enshrined in law. Yet the costs of mandatory schemes are often high. The NFB questions this additional burden, making businesses less competitive.

Richard Beresford, chief executive of the NFB said: “In every industry you will always get someone that pushes the boundaries and our industry is no different. To help increase consumer confidence, the NFB allows consumers to contact reputable builders.” www.rdr.link/BJ006

‘Hear’ and Now Extent of occupational deafness in construction revealed.

The construction sector has the secondhighest rate of employees developing occupational deafness. In fact, every year, 1 million people in the UK are exposed to hearing-damaging noise at work. So, to help raise awareness, Insulation Express has investigated the loud truth of construction tools. They’ve uncovered the noise levels of construction’s most popular tools before highlighting the hearing implications that can occur from using these without protection.

To read the findings go to www.rdr.link/BJ008

Breathing Easy UKATA and British Lung Foundation help deal with asbestos.

With the numbers of people dying each year from asbestos-related diseases in the UK continuing to rise, the leading authority on asbestos training, the UK Asbestos Training Association, has teamed up with the British Lung Foundation to raise awareness, fund research and support the victims of asbestos related diseases.

For anyone who works with or might potentially come into contact with asbestos at work, the Asbestos Awareness Course is delivered throughout the UK. Find out more at www.rdr.link/BJ007

I

12 NOVEMBER 2019 PROFESSIONAL BUILDER

A New Dawn 2020 Colour of the Year announced.

Dulux Trade has revealed its Colour of the Year for 2020 as Tranquil Dawn.

A panel of experts selected the soft green to embody “the nation’s mood on the approach of a new decade”. Karen Wilkinson, Dulux Trade: “The pale green tones are calming and comforting just when homeowners need it most.”

Find out more at www.rdr.link/BJ009

© highwaystarzl/Adobe Stock

2019 UK Plumber of the Year announced

A Clay to Remember

Talent Bonus £500 new apprentice support grant available for small businesses.

A support grant is being piloted by CITB for small businesses taking on apprenticeships to help with initial costs. A £500 apprentice support grant is available for employers who either pay no levy, or pay the reduced rate of levy, for every apprentice that has started college or with another training provider. Mark Noonan, CITB Industry Relations Director, said: “This helps to ensure there is a talent pool sufficient to meet the needs of construction.” www.rdr.link/BJ010

Brick manufacturer launches partnership with charity.

Over the next two years, Ibstock has committed to raising vital funds for the housing and homeless charity, Shelter through a series of fundraising initiatives, with a target of £50,000 in the first year. Joe Hudson, Chief Executive of Ibstock, commented: “A home is a fundamental human need. But in Britain today, that right is being denied to millions of people whose lives are blighted by homelessness.” www.rdr.link/BJ011

PANEL DECISION

Building Character

Wood panel manufacturer Norbord has reported it is making significant progress at its Dalcross-based factory, following a further £35million investment earlier this year.

UK homebuyers deterred from buying “characterless” new-builds.

This second recent investment into the site, following a £110 million expansion programme last year, will see the construction of a second wood debarker and flaker, heat plant and a dryer at the Morayhill mill, increasing the production capacity.

Alan McMeekin, Norbord Europe Managing Director, said: “The plan was always to invest further and we are pleased that the very successful start-up, as a result of great team work and market has enabled us to enhance facilities earlier than we originally anticipated. This £35 million investment will increase

Set for completion in 2021, the development will allow the mill to meet increased demand for oriented strand board (OSB) across the UK and Europe

capacity and deliver an increased level of support to our strategic customer base, further underlining Norbord’s status as the world’s number one OSB producer.” www.rdr.link/BJ013

New research from FJP Investment has uncovered UK homebuyers’ sentiments towards certain new-builds. The survey of 1,000 homebuyers and property investors found that buyers are deterred from purchasing new-build homes in the UK because they are “unattractive” and “devoid of character”.

However, 75 per cent of homebuyers praise the modern facilities typically included in new-build developments, as well as their energy efficiency. www.rdr.link/BJ012

YOUR LETTERS... ...problems solved @PB_mag

@probuildermag

www.facebook.com/probuilderonline

W www.probuildermag.co.uk

Professional Builder, Regal House, Regal Way, Watford, Herts, WD24 4YF. Through our extensive manufacturer network, Professional Builder has access to some of the best technical brains in the industry. If we don’t know the answer to a building-related problem ourselves, we almost certainly know someone who does.

If something is troubling you, or if you have any other comments on the world of building, let’s hear it.

RETIRING TYPE Dear Professional Builder

By the time you read this letter I will be retired and living in my caravan in Selsey. I am renting out my house to get a good pension, and I have a little boat for sea fishing. I have had the caravan for years, and the tax man doesn’t know anything about it, so I am disappearing off the radar. Good luck to you all. I was thinking of keeping a Dear Professional Builder few tools to do some odd jobs around the site, but I don’t I consider myself to be reasonably need the dosh. Anyway, I enjoyed your magazine, and I intelligent, but when I read the article hope the young people out there take the time to read up on breather membranes in your and learn a few things. All the ones I have seen don’t magazine recently I got to the end want to learn anything, they just want the big money, but I and felt I had learned nothing. It is tell them they have nothing to offer. If you want to earn a ©Niko_Cingaryuk/Adobestock almost impossible to gain any kind of lot you have to give something that people can’t get reliable guidance on this. If I follow the gist of the article it is saying that anywhere else. That is how the world works, but they you should not rely on moisture permeable membranes to do the job but don’t know it yet. should carry out an assessment. ● Paul Coulter, Haslemere, Surrey If in doubt, put in some eaves and high level vents. That seems to be in line with the BS Code of Practice but some manufacturers are saying PB: Good luck in your retirement. There may well be you can rely on the membrane to move the moisture to the outside with some feckless youngsters out there, but there are a great no extra vents. And they have proof in the form of Agrement certificates many who are talented and hard working. They will do etc. I have been told by the experts that putting in ventilation can well we are sure of it. actually make matters worse because, on windy days, it pulls more moisture from the house.

It would seem to me that a house that has extractor fans, a good vapour barrier or vapour check plasterboard, and no gaps around light fittings, is not going to cause the same kind of condensation (in the loft) as a house which has none of these things. The problem for the roofer is knowing how effective these provisions are. He can’t remove light fittings to see if there are any air leaks. The article seems to say that we should assume the worst case scenario unless we can prove otherwise and, as a default position, we should just put in vents. The question that remains unanswered is: “What it the point in a breather membrane at all if it doesn’t do the job?” ● Colin Prentice, Coleshill, Warwickshire

A DEEP BREATH

Dear Professional Builder Please can you send me a replacement Professional Builder T-shirt as my old one has worn out? Thanks in advance, ● Darren Reeves PB: A T-Shirt is on its way Darren but the best way to get your hands on one is to visit Professional Builder’s Toolfair. And you won’t have long to wait because the industry’s favourite exhibition comes to Sandown Park on 7/8th November – and we’ll even throw in a free bacon roll as well.

I

14 NOVEMBER 2019 PROFESSIONAL BUILDER

‘TANKS’ VERY MUCH Dear Professional Builder I read somewhere – it could have been your magazine – that you have to tank shower areas even if you use water-resistant green plasterboard. Is this right? ● Rosie Pendleton, Balham, London SW12 PB: Yes, the revised British Standard Code of Practice calls for a waterproof membrane or tanking on all shower areas. This can be achieved with Ardex or Dunlop kits on plasterboard as well as tile backer boards.

©JoAnnSnove/Adobestock

GOT THE T-SHIRT

©Vitalykrivosheev/Adobestock

PB: In new builds, where these things are specified and controlled, it may be possible to rely on breather membranes. In a refurbishment job there is simply no way of measuring these things, so using materials that are primarily designed for new build is always going to be problematic.

Professional

Cam paign FIGHTING

TOOL THEFT

TOGETHER

Sponsored by...

The Armorgard

guide to preventing tool theft from vans

For your free copy visit www.armorgard.co.uk/guides @PB_mag

www.facebook.com/probuilderonline

The PRO

choice R

eports of vehicle crime are on the rise, with commercial vans presenting particularly attractive targets. The average criminal can take a matter of minutes – even seconds – to break into trade vans.

Common techniques include drilling out locks and the ‘peel and steal’ technique, where the sliding door is wrenched apart with brute force.

These break-ins are a concern for tradespeople where theft directly impacts on their livelihoods. Victims are not only required to foot the cost of stolen tools, they will also need to pay for damage to their van. While the vehicle undergoes repairs and the tradesperson purchases replacement

Protect your tools from thieves with Van Grille Pro. tools to be able to continue their work, valuable time for business is lost.

There are many ways to deter criminals and prevent tool theft from commercial vans. These include CCTV, perimeter alarms, stronger locking systems and many more. Security and cooling systems manufacturer CrossGuard has teamed up with supplier and installer of security products, DRS Garage Doors to launch a new solution in Van Grille Pro. Van Grille Pro is a security grille system that can be installed into a van’s side and rear doors to prevent and deter thieves. The retractable security grilles used are resistant to a wide range of tools, including pry bars, screwdrivers, wrench knives, glass cutters and pliers. By increasing the attack time required, these grilles deter thieves from attempting to

steal your tools. Attacking the grilles also creates a lot of noise, which is not desirable for thieves, as the risk of getting caught is higher.

“The security grilles were originally designed for building security to guard doors and windows,” explains Carl Heseltine, Cross-Guard Grilles Manager, “while also presenting a visual deterrent to potential thieves. Broadening the application of our grilles to secure vans seems like a natural progression – they offer a great way to keep vans secure. I previously worked within a similar role to the average tradesperson, using a commercial van to transport equipment necessary to perform my job. I know from experience that unloading and loading a van every day to avoid having equipment stolen is a massive inconvenience, which costs time and effort. If Van Grille Pro had been available at this time, I would have gladly utilised the solution, so I’d have peace of mind to leave equipment in my van.”

I

PROFESSIONAL BUILDER NOVEMBER 2019 17

Have your say at probuildermag.co.uk #fightingtooltheft Installing grilles as opposed to roller shutters into commercial vans offers a number of benefits, including: 씰 Minimal impact on van weight restrictions – lightweight grilles 씰 Minimal opening restrictions – grilles retract and are small and compact 씰 Easy installation 씰 Automatic locking mechanism with a one motion slide The Van Grille Pro system includes a warning label which acts as a visual deterrent to potential burglars. This label can stop the criminal even attempting theft in the first place, meaning there is no need for the tradesperson to pay for the damage or replacement of van doors.

The security grilles are available in a variety of colours and are a very aesthetically pleasing solution to securing vans. They include a 2-point lock and slam post for enhanced security, where

Together, we can do our bit to fight tool theft!

the grille is locked simply by sliding it from the open to the closed position. The key is only required to unlock the grille – making it simple and hassle-free.

James Salt, DRS Garage Doors, adds: “We came up with the idea for Van Grille Pro after a client came to us asking for a roller shutter to be installed into one of their vans. We looked into this solution

and agreed a sliding security grille would be much better. Considering all the benefits of a grille system and a successful install of a prototype, we decided to implement grilles into our own vehicles. Next to alarm systems, we believe Van Grille Pro to be the best solution on the market to protect against tool theft.”

For further information on Van Grille Pro online visit www.rdr.link/BJ099

SPECIAL REPORT

VOL.1 NO.5

NEWS FOR TODAY

NEW SERIES

THE ‘WRIGHT’ STUFF

PROFESSIONAL BUILDER CONTINUES ITS CELEBRATION OF THE TRADESPEOPLE WHO ARE PRESERVING OUR BUILT ENVIRONMENT HERITAGE, WITH A VISIT TO JASON WRIGHT OF J WRIGHT ROOFING. LEE JONES INVESTIGATES.

“I got sacked by my Dad in May 1991 and, out of sheer stubbornness, started out on my own on the following Friday,” recalls Jason.

Today, the successful company that bears his name champions the sensitive repair of period properties, both through his firm’s on-site endeavours, and also through his active membership of the National Federation of Roofing Contractors (NFRC) Heritage Committee. Indeed, the expert roofer holds NFRC Heritage Craft Master status, and is evangelical on the subject of historic buildings.

The setting for our meeting with Jason – one of the glorious Georgian crescents of Royal Leamington Spa – could not have been more appropriate, and it is here his team were undertaking the re-roof of one of the elegant buildings so characteristic of this Warwickshire town. “We do a lot of work for local authorities, so the amount of heritage work we are undertaking at any one time varies, but I would think it would represent around 25 per cent of our business, and they are projects that demand a different skill-set and level of experience.”

Anyone involved in the roofing repair of a period property will tell you that the key to success is in sourcing and specifying the right materials, as Jason explains. “There is actually a wide variation in tiles across a relatively small geographical area. We can be working in anything from Welsh Slate, Westmorland Randoms or handmade clay plain tiles, the last of which dominate the roofs of the west midlands. Move east to Lincolnshire and clay pantiles hold sway, whilst central locations will often make use

I

20 NOVEMBER 2019 PROFESSIONAL BUILDER

Jason Wright (left) of J Wright Roofing

of Collyweston Stone Slate.”

“The first problem you’ll encounter is getting hold of these products. My dad was a real-life Steptoe, storing anything of any age he could salvage in our yard, and that’s something I learnt from him. That’s why we have our own reclamation yard because with, only three major quarries still open in North Wales, for example, price and availability can be an issue – with £6 a slate being quoted, and lead times of up to 12 weeks. We will certainly still use new Welsh slate but alternatives do need to be found to fill a gap in supply. The only Spanish slate we would use would be Del Carmen Ultra and Riverstone Ultra, both premium products from SSQ – and the only slate from Spain to be approved for use in the

Snowdonia National Park.”

It’s not just the materials, of course, because the more corrosion-resistant copper clout nails on a slate re-roof like the one at Leamington Spa are a priority, but more modern elements can also find their place.

“Because they weren’t originally built with central heating, period properties didn’t have to cope with modern condensation issues, but today we will install breathable membranes of no less that 160g/m2. If a heritage property is to enjoy the repair that it deserves then it can never be a price-driven project, a position that both client and builder need to be honest about from the outset.”

J Wright Roofing has itself worked on some very prestigious projects, including Windsor Castle and the Victoria Law Courts in Birmingham, as well as winning the Heritage Project award at the NFRC awards, but one of the things Jason most laments is the lack of training in the sector. “If our historic housing stock is to be maintained then more needs to be done to preserve these skills,” he declares. “We’re passionate about training, and have more apprentices per head of staff than any other roofing company in the UK. In addition, we operate

an early intervention programme in a local school, and pick four of the best apprentices from there to join us. Hopefully that’s an example that others will follow.”

Not only is Jason an advocate for training he is also actively engaged with the NFRC Heritage Committee. “In order to reflect the variations in the roofing vernacular, each region has a representative on the committee.

It aims to address issues associated with work on period properties from material supply, to techniques – as well as to promote training and best practice. Our particular focus is to join the Heritage Register, because, if they do, companies of any size can access a lot of support.”

The National Heritage Roofing Contractor Register is an NFRC initiative designed to ensure that only the highest standards of workmanship are undertaken on what are some of our most precious buildings. A resource open to both members and non-members of the National Federation of Roofing Contractors, qualification demands a relevant heritage qualification, as well as continuous review by a panel of NFRC experts. Roofers with a proven track record then fall into the following categories:-

Heritage Roof Master: Can provide both technical design capabilities and quality workmanship.

Heritage Craft Roofer: These firms will always provide quality workmanship but do not offer the design facility.

Heritage Craft Roofer Operative: Are craftsmen/women who carry out the roof work as specified.

“There’s a lot of ignorance amongst even experienced builders about how to approach heritage work,” continues Jason. “The requirements of BS 5534, the Code of Practice for Slating and Tiling, are not always relevant to historic properties, for example, and it is that kind of advice that the NFRC can help with. If you’re sorting and grading a Westmorland slate roof, for instance, then the approach is down to experience, and is a matter for you and a conservation officer to determine.”

“There is a much greater satisfaction in sensitively restoring a historic building than the kind of tile bashing you might get on new builds,” he concludes. “That’s first and foremost why we do it, but there’s certainly a commercial benefit as well.”

For further information on J Wright Roofing visit www.rdr.link/BJ014 For further information on Del Carmen Ultra and Riverstone Ultra from SSQ visit www.rdr.link/BJ015 For further information on the NFRC Heritage Roofing Committee visit www.rdr.link/BJ016

I

PROFESSIONAL BUILDER NOVEMBER 2019 21

SPECIAL REPORT READERS’ LIVES

Master stroke Professional Builder’s Lee Jones talks to the newly crowned Master Builder of the Year, Tom McCrank of MCK Construction.

W

hen the shared visions of client and architect are joined by a builder with the construction skills to realise them, what you get is the kind of stunning renovation project that the Old Coast Guard Lookout at Usan exemplifies. It was Tom McCrank who was tasked with transforming this derelict structure just south of Montrose into a contemporary home, and he is the worthy winner of the FMB’s Master Builder of the Year Award as a result.

“I actually grew up within half a mile of the tower and, having seen it so often as a child, had an emotional connection to the building as a consequence,” recalls the 37 year old proprietor of MCK Construction. “When local architect, Garry Adam brought me in on the job I knew it would be a joy to work on. Not only that but this is quite a tight knit community, so everyone involved really rallied round in order to bring this building back to life.”

The former joiner is well versed in producing unique new builds, extensions and refurbs for his clients across the north

I

of Scotland, but this coastal property had a scale of ambition that would bring its own challenges, not least getting any kind of design through the planning department.

“What would emerge from the drawing board would be a pretty unique project and – as with anything that bespoke in character – constant communication between ourselves and the architect was

22 NOVEMBER 2019 PROFESSIONAL BUILDER

Tom McMrank (Second from right) recieving his award

an absolute pre-requisite. The first issue we had to address, however, was access to the site, with the only way in or out via a wholly inadequate narrow path, so,

before we carried out any major works, we had to install a temporary road across an adjoining field.”

The property also makes use of zinc cladding, and a specialist contractor was employed for its installation, but a location so close to the North Sea would necessitate careful consideration of materials across the entire build, as Tom explains: “Because the substantial glazed gable end of the extension is facing the coast, solar gain can cause the glass to expand and contract, whilst the effect of high winds also has to be taken into account. That’s why we had to spend a lot of time with the glaziers ensuring that what was supplied was fit for purpose. Similarly, exposed glulam beams have been used as a feature in the roof space, and considerable care was taken to ensure they were right both structurally and aesthetically.”

After 11 months on site Tom and the MCK Construction team completely refurbished the tower, and constructed a modern extension alongside it. Its occupants can now enjoy a panoramic view of the Scottish coast from almost every room, including a zinc-clad projecting bay window in the master bedroom, whilst it is a project that has inspired its already experienced builders to look ahead to more ambitious projects.

“I’ve been in this business a long time, and certainly fallen in love with some of the projects that I’ve previously worked on but this is definitely a one off, and my favourite job to date. My father was a builder and contractor as well, so the building game was something that has been around me from an early age,” he recalls. “Whilst I initially trained as a joiner, I was able to gain some qualifications through evening classes and became a site manager for a large contractor.” The credit crunch of 2009 would call a halt to the scale of project that Tom had become accustomed to working on, and would signal a change in career path for him personally. Bringing together his skills on the tools, as well as significant project management experience, MCK Construction was born – and this year the business is celebrating its 10th anniversary. “One of our tag lines is helping you build your dream home and, whilst that will, of course, include residential new builds, it could equally be a kitchen or bathroom job. To be rewarded for what we do with Master Builder of the Year is something that we are just totally blown away by. Hopefully, we’ll now be the firm that people turn to for these kind of projects because they are a delight be involved in.”

For further information on the Federation of Master Builders (FMB) visit www.rdr.link/BJ017 For further information on MCK Construction visit www.rdr.link/BJ018

Professional INVENTORS CORNER

PROP STAR O

f the many fledgling inventors Professional Builder has championed over the years it is often a tale of a protracted journey to the finished product. For builders David Sgueglia and Bob Hicks, however, the solution they have delivered to the building industry has been realised in a relatively short space of time – and is the product of no less than a combined 50 years of on-site experience.

Whether you’re building a supporting wall for a knock-through extension, or installing the now perennially popular floor to ceiling bi-folds, needling has hitherto been the answer. It conceals the RSJs and offers that more fashionable open plan feel that homeowners currently crave – but it is a method that can come at a heavy price.

Needling now has a rival in the shape of Sneedle Props, a new support system for extensions and bi-fold door installations. Professional Builder’s Lee Jones reports.

“Needling can cause massive disruption to the upstairs of the property,” explains David. “It can then cost thousands to put right, and put a customer’s bathroom out of action, or leave holes in the walls whilst they’re still occupying those rooms, so if any job on a building site deserved a better way it’s that. We had two extensions on the bounce where we encountered difficulties. The first saw damage to the first floor plasterwork and tiling – which we subsequently needed to remedy – and in the second, we were required to remove radiators, and drill holes through fitted wardrobes. It’s the kind of outcome that can easily put a builder’s profit margin in jeopardy, but it also doesn’t do

a great deal for customer satisfaction.”

After those two experiences the very next job would provide David and Bob with the perfect opportunity to find a solution.

More and more property owners in the market for an extension are demanding flat ceilings rather than obtrusive steel bulkheads but, when they were asked to build an extension for a client who was well over 6ft 7in. tall, hiding the RSJs became an absolute necessity.

“This particular customer had just had their bathroom remodelled at great expensive so, for any number of reasons, traditional needling just wasn’t an option.

We contacted the various prop manufacturers, and there wasn’t anything out there that eliminated potential disruption to the upstairs, so we set about making our own. We bought some steels,

The builders behind the Sneedleprops, David Sgueglia and Bob Hicks, installing the system

I

PROFESSIONAL BUILDER NOVEMBER 2019 25

Professional INVENTORS CORNER cut them to the necessary sizes and employed a firm with whom we were wellacquainted locally to weld them. In order to prove that the concept itself would work our first effort was heavily overengineered, and we subsequently employed the services of a structural expert who helped us bring the size and weight of the product down quite substantially. Once that was achieved, we quickly realised it was something we could employ on multiple projects.”

What would emerge would be Sneedle Props, a structurally engineered singlesided system that supports the wall from the outside and allows only the knock through area to be disrupted, eliminating drilling through upstairs walls. “Since that very first experience – which was only a couple of years ago – we’ve moved very quickly. We reached the patent pending process in early 2019 and the system is now available to hire. It’s a simple way out

of a very common dilemma, but the builders who’ve since experienced the system, have told us it’s the only way they’ll work in the future.” Not only do the

Sneedle Props create less disruption, given that they are specifically designed and tested for the job, they represent a safer method, particularly since they are holding up the masonry rather than the floor. Steels can be successfully installed in two or three days, and there’s no need for builders to be up and down stairs working in the rooms above, whilst the money saved can be passed on to the client, thereby increasing the competitiveness of the builder.

Creating a time-saving solution for your fellow tradespeople, whilst also running a successful building firm, is a significant commitment, but the two Hampshiretradespeople are determined to expand still further. “Up to now the Sneedle Props have only been available locally,” concludes the 45-year-old, “but there are plans to expand into hirers and merchants, because it’s a product with so many advantages.”

For further information on Sneedle Props visit www.rdr.link/BJ019

SPECIAL REPORT MENTAL HEALTH

MIND OVER MATTER Professional Builder’s Kieran Nee recently attended a Mental Health First Aid course hosted by Willmott Dixon.

AdobeStock/Kalinovsky

28

I

AdobeStock/kromkrathog

C

reated in Australia in 2000, the Mental Health First Aid programme has since gone global and aims to teach members of the public how to assist someone who is developing a mental health issue or is already in a mental health crisis. The issues the programme covers include: depression, anxiety disorders and substance misuse. The crises covered include: suicidal thoughts and behaviours and self-harm.

Each year, one in four people experience a mental health issue.

The aim of MHFA is to extend help and awareness of mental health beyond the realm of skilled professionals and into the social, familial and work networks that surround the person in need of help. It is a ‘first aid’ course in the sense that the goal is quick action, picking up on tell-tale signs early on that something might be of concern. Furthermore, and importantly, the aim is to pass any at risk individuals into the care of professional services.

Raising awareness and equipping work colleagues, family members and friends across the UK with the tools to combat mental health issues also has the effect of reducing the stigma attached. The construction industry has taken

tremendous strides over the past two years in opening up about issues, but the fact remains that men are more likely than women to suffer and more needs to be done to create a working environment on site that facilitates talk, understanding and assistance.

Throughout each of the areas covered by the course, the same approach is taken. This approach is summed up as ALGEE. A – Approach the person, assess and assist with any crisis L – Listen and communicate nonjudgementally G – Give support and information E – Encourage the person to get appropriate professional help E – Encourage other supports

NOVEMBER 2019 PROFESSIONAL BUILDER

That first step, approaching someone you think may be in need of help and instigating a conversation on the topic of mental health can be the hardest part. It can feel inappropriate or jarring to ask a colleague outright how they are, and tell them that you are concerned they’re not okay. It’s important to remember to not be scared of causing offense. If your colleague does genuinely need help, getting to the bottom of the issue is more important than being polite.

It is important to genuinely listen to the person and hear what they have to say. It may not be helpful to charge in with your own opinions and diagnoses. Far more important is to create a space free from judgement, where your colleague might feel more comfortable to open up.

The person with mental health issues

may not be aware of the level of professional help that is available to them or how to access the help that is available. You can act as the encouragement they may need to seek professional help, as well as support from friends and family.

Stress Stress is a big factor in causing mental health issues. It’s not the only factor, of course, but it is particularly prevalent in the construction industry. According to the CIOB, 58 per cent of the UK’s construction workforce feels that the industry has become more stressful in the last 15 years and ‘low-skilled male trades’ are 3.7 times more like to commit suicide than the average. In a work environment that involves long hours, demanding

“It’s important to remember to not be scared of causing offense.

If your colleague does genuinely need help, getting to the bottom of the issue is more important than being polite.” physical work and often a pressure to “keep your chin up”, stress can often build up inside with no outlet.

MHFA Advice The MHFA advises thinking about each individual as having an in-built stress container. You can pour all of life’s stresses into this container but it doesn’t

have a lid, so unless you regularly open the tap at the bottom, the container will overflow. In real terms, an overflow might represent a mental health crisis, whilst the tap could be a social activity that takes your mind off of your problems and allows you to see things in a different light.

What’s more, the size of everybody’s containers is different and can be affected by your background and life experiences.

As important as it is to raise awareness of the prevalence of mental health issues in the building industries, and many charities are doing a great job of that already, it is equally important to equip employers and employees with the tools to identify and approach mental health issues. In next month’s issue, we’ll take a look at some of the specific symptoms and behaviours to look out for.

For more information about MHFA England and how you can get involved go to www.rdr.link/BJ020

TRAINING & UPSKILLING BMI ACADEMY

t h g Ri

C

In a new regular series, Professional Builder showcases the training opportunities available to tradespeople.

ON

E S R OU

TRAINING IN MY HEART Professional Builder visits BMI UK & Ireland’s BMI Academy in South Cerney, Gloucestershire, to experience first-hand the roof training facilities that the company has, and the breadth of courses it can offer.

T

he BMI Academy offers contractors of all skill levels the chance to either expand on what they already know about roofing, or venture into a new sector of the industry. With best practice and standards at the forefront of the company’s philosophy, it took the initiative to open up the industry’s first dedicated training academy back in 1983, which now houses a purpose-built workshops for both flat and pitched roofing and a classroom facility for a mix of practical and theory-based training. This makes BMI the only UK roofing manufacturer currently able to offer training in both disciplines and on one site.

The academy’s pitched roof zone comprises a variety of rigs including: a gable-to-gable rig, life-size hip and valley rig, life-size monopitch with top edge abutment rig, and a plain tile detail rig for full system installation. These are complemented by a variety of mobile rigs outside.

The flat roofs training zone is equally well equipped with liquid waterproofing and single ply rigs, plus a life-size flat roof and demonstration tables for single ply and liquids detail work. There is also a large external bitumen rig for torch on

I

and pour and roll training.

The company employs three full-time trainers and delivers approximately 60 hours of training every week. Since opening in 1983, over 45,000 delegates have been trained at the academy. In 2018, the Academy hosted over 2,000 delegates.

Beyond on-site training, BMI delivers training at colleges and training providers: currently 17 organisations across the UK work with the academy.

With courses spanning installation standards, estimating, dry fix systems,

30 NOVEMBER 2019 PROFESSIONAL BUILDER

ventilation and solar installation, there really is something for anyone looking to improve on their knowledge and skills of the pitched roofing sector. Flat roofing is equally well represented, with courses on thermically-applied bitumen; cold-applied liquids and single-ply roofing being offered; along with the facility to work with medium to large size contractors to develop and deliver bespoke flat systems.

That bespoke training is also available on pitched roofs, and the Academy is also able to conduct them either at the Academy or at your own location.

The company has applied its knowledge and advice to Continuing

NO. 2 IN THE SERIES

Professional Development (CPD) courses across the trade, and currently has the ability to conduct a range of tailored RIBAapproved CPD modules and presentations. CPD courses offered include: BS 5534: The New Standard; An Introduction to Pitched Roofing; Wind-loading & the Need to Fix Tiles; Condensation Control in Cold Pitched Roofs; Defects in Pitched Roofing; and Photovoltaic Panels in Pitched Roofing.

In addition to its CPD courses available, BMI UK & Ireland is the only manufacturer authorised by the NFRC to deliver the pitched roof Basic Competency Programme (BCP) training.

BCP accreditation means a worker with a basic CSCS card, following the successful completion of their CSCS health and safety test, gets to the 3year Red ‘Experienced Worker’ CSCS card status, and on the path towards their Blue ‘Skilled Worker’ card.

Balance of the trade Supporting the belief of a balanced approach to learning, all courses offered by the BMI Academy entail a mix of theory and practical work to ensure that students receive all the knowledge and skills required to carry out work on site.

The Basic Roofing Course offers participants a two-day introduction to the basic principles and components behind a pitched roof and typical problems that can occur if one is not installed properly. While this course is aimed more at those looking for an introduction to the industry, all of the courses offered at the Academy provide an insight into the BS 5534: 2014 +A2: 2018 industry Code of Practice and recent changes affecting the installation of fixings for tiled roofs.

Those contractors looking for a more in-depth knowledge of roofing will find the Advanced Roofing (two-day) useful in addition to its two-day Estimating course for those looking to hone their in-house estimating services. Other, more specific one-day courses include BS 8612 – Dry Fix Components, BS 5534: 2014 +A2: 2018 – Changes to Regulations; and PV Installation.

Contractor, training and upskilling courses are a costeffective way to ensure that your staff are up to date with the industry’s current standards and regulations.

For further information on the training offered by BMI Redland visit www.rdr.link/BJ021

BUSINESS SOLUTIONS ESTIMATING

Estimate to accumulate

Professional Builder puts the questions to time-saving estimating service provider, Build Aviator.

PB

Many of our readers might be unfamiliar with Build Aviator as a name. What is it you can provide the trades?

Build Aviator provides comprehensive and professional quantity take-off reports, including reliable estimates of materials, plant and tool hire and the labour required to complete the build.

PB

So how does a builder get started with the system?

By simply uploading your plans and selecting your turnaround time your project will be analysed and priced within a matter of days by an experienced extrade expert. Once the project has been analysed, the estimator will call you to discuss all the ins and outs of the project, any extra or specific details and your labour rates, mark-ups and margins. Once the estimator has finished working on the

project, you will receive the reports digitally; a set for your business and set to pass straight on to your client. We encourage you to look over the documents to make sure everything is in working order and all the details are correct.

PB

There’s always the unexpected in any job so what happens if changes need to be made?

If you need to make any changes, that’s not a problem as any amendments, except structural changes, are free and can be completed quickly.

TRADESMAN ANDY D SHARES HIS EXPERIENCES WITH BUILD AVIATOR

PB

How long did it take you to price an extension without the software?

Before using the program it could take me hours – sometimes even days. It all depended on the size and intricacy of the build and the type of materials being used. I would have to ring round for prices and do long, hard maths to hope everything was accurate and correct. After doing all the calculations, you still didn’t know for certain if you were right – you just had to hope. The program is fantastic because it gives you that certainty you can’t get by pricing a build yourself.

PB

For more information on Build Aviator go to www.rdr.link/BJ022

I

32 NOVEMBER 2019 PROFESSIONAL BUILDER

BUILD AVIATOR fully understand the pressures that builders have to contend with and it’s for that reason that they’re offering a whopping 25 PER CENT OFF their estimates for a limited time only.

All you have to do is email or post your plans to them, let them know your company rates in a quick call, and they’ll do the office work, pricing everything required for the proposed works. When all is finished, checked and you’re happy, they’ll produce a snazzy report, ready to hand over to; and impress your client.

OFFER!

Were your prices accurate before using the software?

The prices were never entirely accurate. I had to use a lot of rule of thumb and guess work. I had to work out the physical measurements and gather the actual prices from the merchants – now the program does all that for me. In the past I’ve brought pricing manuals to try and help me but the pricing sections are all sold separately so you end up with hundreds of different books for one job. The program has everything in one place so

it makes it a lot easier for me to not only calculate and price the build but also to ensure my figures and prices are accurate. It’s great because the materials, prices and everything is organised into sections. The program instantly shows you the accurate figures for the profit you’ll make, quantities and prices of the materials, labour and plant you’ll need and this can ultimately show you if it’s worth going for.

Professional

BUILDER’S

We give our verdict on new products in our unique site tests, but now we want to give you the chance to try them – AND KEEP THEM – for yourself! All you have to do to enter the free draws is simply just type in www.rdr.link followed by the unique code.

!

L L A R O F E FRE 3

FILTERS

FERNOX TF1 SIGMA FILTERS Fernox is giving away three TF1 Sigma Filters – the latest addition to its highperformance filter range. Available in 22mm and 28mm, as slip socket or valved versions; it uses unique Hydronic Particle Separation (HPS) technology and magnetic filtration to remove all types of system debris fast and efficiently. The high-quality filter is manufactured from an engineering grade polymer.

Designed as a sealed unit for increased reliability, it has no removable lid, and is easy to clean and service. For maximum installation flexibility it can be fitted on horizontal or vertical pipework in both flow directions. The TF1 Sigma Filter is also supplied with a 10-year warranty.

We’re ‘filter’ the brim with great prizes once again and all you have to do is visit www.rdr.link/BJ027 to be in with a chance of winning.

Go to www.rdr.link/BJ023

3

WALTHER STRONG DECKTAPE 50MM+82MM DeckTape is the perfect product for use when installing composite deck boards. Designed to protect the timber frame of a deck from water/moisture rot and frame weathering. Since being introduced DeckTape has been used by professionals to protect the cut ends of the timber and also the top of the joists. This set of tape includes three of each of the sizes; the 50mm and 82mm, and comes with a 25 Year Guarantee to enhance the frame quality.

All hands on deck this November for Professional Builder’s online giveaways!

Go to www.rdr.link/BJ024

Easy to Enter!

24

CARTRIDGES OF SEAL ADHESIVE

GREEN LASER re than ever befo er si ea w no ’s It r mpetitions on ou to enter the co e th l al d te ec coll KAPRO website. We’ve , ge one handy pa competitions on have to enter KAPRO 870G ly VHX PROLASER meaning you on s once! ta your de il VIP BJ027 www.rdr.link/ The Kapro 870G VHX

GEOCEL GEOCEL THE WORKS SEAL ADHESIVE (CLEAR) Geocel’s theWORKS claims to be the holy grail of secure and seal adhesives – a fast-acting, ultra-strength product which works on almost any substrate in any condition without shrinkage or staining. It is the perfect product to keep in the back of the van to help get you out of any tight spot. This solution will work not just in the damp but actually underwater, making it perfect for emergency repairs when it’s chucking it down.

To get your hands on a free cartridge in versatile clear, simply visit the URL below.

Go to www.rdr.link/BJ025

34

I

NOVEMBER 2019 PROFESSIONAL BUILDER

SETS OF DECKING TAPE

1

Prolaser VIP green Class II laser has vertical, horizontal and cross beams with an indoor range of 30m (outdoor range 60m), an accuracy of ±0.2mm/m and conforms to CE, RoHS and FDA safety regulations. It has an audio and visual ‘out of level’ warning with pulse mode and is IP65 water and dust proof featuring a protective rubber moulded case and ¼in. tripod thread ( in. thread adaptor included).

Your colleagues will be green with envy when they see the new laser you’ve won, courtesy of Professional Builder.

Go to www.rdr.link/BJ026

10

DUST SHEET SYSTEMS

STAIR RODS Exhaustively tested and approved for use in industry, the new Stair Rods lock into position to ensure dust sheets stay put on stairs, making any work above stairs safer.

The system is suitable when painting, decorating and for general maintenance.

The set comes in a convenient protective carry bag, and features 14 easily extended rods to help protect carpets, runners and floors.

Never trip again with these great rods, simply go to the link below to be in with a chance of winning.

Go to www.rdr.link/BJ028

5

1

SET OF UNIVERSAL BLADES

NORTON CLIPPER NORTON CLIPPER ASSORTED BLADES Norton Clipper’s Multipurpose Cutting Discs produce less dust, less noise and result in precise, straight cuts when used on a variety of materials including metal-inox, stone, aluminium, PVC, ceramics and tiles. Suitable for wet and dry cutting, Norton Clipper Universal Blades are available in a range of sizes, from 115mm, up to 350mm in diameter, making them suitable for angle grinders, chop saws and masonry saws, so you can tackle big and small jobs with ease.

You could be in with a chance of winning a set of Norton Clipper Classic Universal Blades (115mm, 230mm and 300mm) and a tin of Multipurpose Cutting Discs.

Go to www.rdr.link/BJ029

PAIRS OF BOOTS

BUCKLER BUCKLER BUCKZ VIZ SAFETY DEALER BOOTS Buckz Viz is a new range

by Buckler Boots laden with safety, performance, weight saving and comfort features in safety boot styles with a visual impact rarely, if ever, seen in safety footwear before.

Combining EN safety hi-viz fluorescent waterproof Cordura in a choice of yellow or orange and cowhide leather upper with reflective piping ensures maximum visibility in any lighting conditions, whether it’s daylight, low light or no light. The Buckz Viz dealer boot style also features waterproof elastic for easy on/off and we’re giving away 5 pairs in your choice of colour.

You’ll be breaking out the bubbly if you win a pair of these great boots.

Go to www.rdr.link/BJ030

5

SAFETY SETS

HELLBERG SAFETY HELLBERG SAFE 3 VISOR AND HEARING PROTECTORS The SAFE 3 headset can be used as a stand-alone visor carrier or together with secure hearing protection for multiple tasks on site. The robust browguard and visor protects from flying particles, is lightweight, comfortable and fully adjustable to various head sizes. It is designed to offer the wearer high protection and comfort. The carrier is developed together with the hearing protector, fits perfectly and holds the visor firmly in place.

Go to www.rdr.link/BJ031

OUGH THERE’S R-ALL’ WAS NOT EN FO ERE ‘F S R’ DE IL BU TIONS ON IF PROFESSIONAL AYS AND COMPETI AW VE GI E IV US CL ST OF EX ALSO A WHOLE HO O.UK FOR YOUR ROBUILDERMAG.C .P W W W T OU K EC YWHERE OUR WEBSITE – CH ON’T FIND THEM AN W U YO R BE EM M AND RE CHANCE TO WIN – WEBSITE. ELSE BUT ON OUR

I

PROFESSIONAL BUILDER NOVEMBER 2019 35

heating, plumbing & wetrooms

OPPORTUNITY KNOCKS

As interest in connected home devices continues to rise, Google Nest breaks down how this is set to offer opportunities for installers in the future.

C

onnected homes are here to stay. Research from PwC suggests that 30 per cent of the UK population say they are planning to buy a connected home device within the next two years. That’s more than double the number who said the same back in 2016, underlining the huge growth in the industry.

And, with connected home technology now integrating everything from heating and lighting to security and fire safety, this presents a huge business opportunity for professional installers. Particularly given that 59 per cent of UK homeowners say they would prefer a professional to install their connected devices, according to Eureka Research.

Your business… in one year PwC’s Connected Home 2.0 survey predicts that £10.8bn is expected to have been spent on connected home devices – including thermostats, video doorbells, security cameras, and more – in the UK by the end of 2019. This comes with two significant opportunities for installers.

Firstly, as more devices are purchased, there will also be a rise in the number of people turning to professionals for help installing and setting up their new

I

connected home devices.

Secondly, YouGov’s Smart Homes 2018 report reveals that among people who currently own at least one connected home device, consideration for buying further such devices increases to 40 per cent. In other words, you may be able to turn a simple installation into a much larger job – a customer who asks you to install a smart thermostat could then be more receptive to hearing about other connected home devices, such as indoor and outdoor security cameras.

Your business… in two years As we move into the 2020s, all evidence points to a new trade emerging. “In the past, we’ve had quite disparate trades – there’s heating engineers, electricians, security and more, each responsible for fulfilling only one aspect of a customer’s needs,” says Paul Haynes, Head of Industry Partnerships at Google Nest.

“With connected technology, a new trade is arising, and the traditional installer – with their skills and knowledge – has much of the core expertise required to join this new trade.”

And it’s not just new customers who will be seeking out the skill set of this modern brand of professional installer.

36 NOVEMBER 2019 PROFESSIONAL BUILDER

You can expect to receive repeat customers, too, as PwC predicts over 40 per cent of existing connected homeowners in the UK are expecting to upgrade their devices within the next two years. The more of these devices you are familiar with, and the more connected home installs you do today, the better for your business.

Your business… in five years By 2025, connected homes are expected to become the norm. “In the next few years, connected home technology will

The installer’s view Two professional installers share their insights and experiences from working with connected home technology, and the benefits that embracing this market has brought to their businesses.

PETER BOOTH, PLUMBER AND GAS ENGINEER (@PBPLUMBER) It’s only a matter of time before we’ve all got these devices in our homes. From my perspective, learning about this market and these products, and making sure I’m comfortable installing them, is a way to prepare my business for the future. I like to talk to customers about the interconnectivity of the Google Nest ecosystem – you can have the Protect smoke and CO alarm, the Hello video doorbell, the cameras, the thermostat, all linked on the same device. It just makes life easier.

Customer feedback is key – and it doesn’t have to be from traditional channels. On my Instagram channel, I asked people to comment on what their favourite smart controller was, and Nest came out on top. From what I’ve gathered on my YouTube and social media channels, professionals like fitting Nest products. It’s a nice, easy, clean job.

Having Nest installed in my own house makes it easy for me to show customers how it works and how simple it is, right there on my phone. If you’re installing something in other people’s homes, you have to know your way around them, so that your customer has enough confidence in you to actually buy the control. You don’t want to be the person who fits it and is then stood there reading the instructions, like you don’t know what you’re doing.

AMRINDER SINGH, PLUMBER, INSTALLER AND NEST PRO AT HANDA HEATING, (@AMRINDER_HANDA) I first came across Nest about four years ago. I searched the website and saw the option to sign up for an installer account. Slowly but surely, I started to receive customers from Nest. That first year, I received 30-40 jobs. The next year, double that. Now I install, on average, three to five of these products every day.

Every installation has the potential to turn into an even greater business opportunity. It’s very common that a customer will get me in to install a Nest thermostat, for example, and then, while I’m there, ask if I can replace the boiler, too. So, I’ll get a job through the company that turns into an even bigger job. Also, customers will often call back and say: “We love our thermostat, now we want to install a doorbell and security cameras – can you help us set it all up?”

There is a definite benefit to becoming a Nest Pro, especially for people who are starting a new business. The way the programme works, you complete a job and receive a good review, then you receive another job and another good review, and so on. The more jobs you do, the more new customers you’ll acquire.

be completely normalised, just like the internet is today,” says Professor Dorothy Monekosso, Director of Research at the School of the Built Environment, Leeds Beckett University. “There will be no need to explain what connected home devices are, or what they do, because almost everyone will own at least one. I expect NEST’S HELPFUL HOME DEVICES there to be a particular demand when it INCLUDE… comes to home security – such as 씰 Nest Learning Thermostat cameras and entry systems – but also 씰 Nest Protect assisted living, helping our ageing 씰 Nest Hello population to live more autonomously.” 씰 Nest Cam IQ Outdoor Needless to say, within the next few 씰 Nest Cam IQ Indoor years, acquiring expertise within the 씰 Nest Hub connected home market will become essential for installers.

MEET THE GOOGLE NEST FAMILY

To learn more about becoming a Nest Pro installer, go to www.rdr.link/BJ032

I

PROFESSIONAL BUILDER NOVEMBER 2019 37

heating, plumbing & wetrooms

Test the water Alex Boweren, Product Manager at Ariston, looks at the different types of electric water heater available, and identifies the applications where they are best utilised.

M

odern electric water heaters are quick and easy to install, offering a viable alternative to traditional cylinder-based systems. Requiring only connection to the electric circuit, cold water feed and some safety devices, these products can be used independently or to supplement existing systems.

However, when selecting an electric water heater, there are many factors to consider, such as: How many hot water outlets will it need to feed? What is the hot water demand of the application? Is it a domestic or commercial installation? Is a storage cylinder required, so there is always a pre-heated amount of water readily available? Or an instantaneous model that simply heats the water as needed? Does the unit need to be sited underneath or above a sink? Is it going to be connected to a pressurised system, meaning an unvented version is required?

Given these variables, it is important to select the product best suited to the job in hand.

Vented or unvented?

When looking at small capacity units, wall mounted, vented models are a good

place to start. Vented water heaters are easy to install and usually positioned directly over a sink, making them ideal for occasional use areas, such as garden sheds and small offices, where there is limited space.

While vented water heaters allow release of pressure through an openoutlet spout, unvented systems are plumbed in and pressurised. This ensures they offer excellent flow rates, matching the incoming water pressure. Unvented products are connected to a mixer tap so users have excellent control over their hot water, even if the unit is located under a sink or in a cupboard.

Small unvented electric water heaters are becoming increasingly popular in properties not connected to the gas network or in buildings isolated from the main DHW system. Due to their compact, space saving size, they can also be fitted easily and economically into commercial properties, building sites, bathrooms or offices.

Going large As the demand for hot water increases, larger capacity units are required. New models which match modern interior designs are more sought after as well as units with new, smarter and in-built technology. There are even ultra slim

units available, such as Ariston’s Velis Evo range, benefitting from twin tank technology with independent heating elements, ensuring more hot water is readily available – ideal for shower rooms, kitchens and bathrooms with higher DHW demand.

Advances in ‘smart’ technology now allow many modern water heaters to benefit from built-in Wi-Fi. Similar to other products embracing the Internet of Things (IoT), this enables units to be set and activated remotely via a mobile app, ensuring hot water – or a hot shower – is ready when required. Users can also use this functionality to monitor energy consumption and reduce their fuel bills.

I

PROFESSIONAL BUILDER NOVEMBER 2019 39

heating, plumbing & wetrooms

Hot water in an instant When space is at a premium, a more compact option is available in the form of instantaneous water heaters which, as their name suggests, heat water as and when required. They can also be referred to as tankless, continuous flow, in-line, ondemand or instant-on water heaters.

These units instantly heat water as it flows through them, without retaining any internally, except for a small amount surrounding the heat exchanger coil. This enables them to be installed inside small cabinets, or between shelving units close to points of use.

Units are capable of producing hot water that serves multiple taps and showers (not simultaneously), making them ideal for applications such as bathrooms. Such products (such as our own Aures unit) are frequently used in domestic and light commercial applications where there is no mains gas supply or hot water storage facility present, yet there is still demand for hot

water at multiple outlets. For example, they are commonly fitted in studio flats, annexes and student accommodation.

Other considerations In terms of installation, while there is no gas connection involved, fitting an unvented hot water system over 15 litres is classified as a “Controlled Service� under the UK Building Regulations, so Regulation G3 applies. As a result, the installation of a large unvented unit should be undertaken by a competent installer.

It is also crucial to ensure any unit fitted complies with the necessary UK regulations, including WRAS, KIWA and

ErP. There are a number of overseas imports that have entered the market but, without adequate testing, their physical integrity could be compromised – while there is also a risk of the water in the units becoming contaminated. It is safer to fit high quality units that not only comply to UK standards, but also have antilegionella functions, to ensure there is no microbial growth.

So, as electric water heating technology continues to progress, it is important to consider a wide range of variables when selecting the right unit for the job. Factors such as capacity, physical size and controllability need to be taken into account, as well as frequency of use.

Selecting a unit most suited to the application in hand will ensure there is always hot water available, while maintaining excellent levels of end user comfort and energy efficiency.

For more information about Ariston online go to www.rdr.link/BJ033

heating, plumbing & wetrooms

Champion boxer James Brennan, Business Development Manager at Pendock, answers some common questions from installers about pre-formed pipe boxing.

I spend ages making sure my pipework is straight. Don’t most people want it left on show?

Many installers put a lot of effort into their pipework, making sure pipes are neat and straight. However, while there is certainly a trend for exposed copper pipework, it’s not for everyone, and it’s unlikely that anyone would want a soil pipe or lengthy flue left on display.

Exposed central heating pipes can also pose a burn risk, can be more easily damaged and are more difficult to keep clean.

An example of unsightly pipework

including wood effect (similar to the look of a laminate kitchen worktop).

Q

Isn’t it best to subcontract boxing-in work to a carpenter or joiner?

Carpenters and joiners usually fabricate solutions on site from wood or MDF – but pre-formed pipe boxing is an alternative, which, in normal circumstances, a heating and plumbing installer should be able to fit with ease. There’s minimal cutting involved, and no need for any carpentry skills.

There is a misconception that pipe boxing is complicated, involving lots of components. In reality, you’ll need two pieces of batten, a pre-formed profile, some screws and some mastic sealant.

There are accessories available if required – these include external and internal corner pieces, eliminating the need to fabricate mitre joints (a job that’s often passed onto a joiner).

Boiler pipe casings, which wrap around the pipework beneath a boiler for a neat look, are another easy-to-fit option.

They’re ideal if a boiler is being upgraded and there’s additional pipework to

Q

Isn’t pipe boxing primarily used in social housing?

While social housing is a significant market for pipe boxing, it is increasingly being retrofitted in private housing. A range of finishes, from standard to the more bespoke, means there’s a solution to meet every application and budget.

Q

conceal, and deliver substantial savings when compared to using a joiner.

Isn’t pipe boxing expensive though?

The initial upfront cost might be perceived as more expensive than buying lengths of wood or MDF to fabricate on site.

However, when the time savings are considered (we estimate it takes around half the time to fit pre-formed solutions compared to on-site fabrication), along with the aesthetic benefits and the consistency of fit and finish, pre-formed pipe boxing is a cost-effective solution.

Q

Where do I buy pipe boxing from?

Q

Our pipe boxing is available through all national merchants, as well as hundreds of independent merchants and distributors.

How do I know which components to order?

For large contracts, we can use site drawings to create a bespoke quote/order. For smaller jobs, our website will probably be a good starting point, before ordering from your local merchant.

If you need assistance with sizing, our technical support team can help. We offer a design service, site visits/surveys and installation support.

Q

Will I need to prime and paint the pipe boxing?

No – products are fully-finished, so once fitted and sealed with mastic the job is complete.

Q

Isn’t it just available in white? Some customers might want a different colour to match their decor.

Pendock’s standard products are finished in white melamine, but laminate provides much wider options. There are a variety of colours and high-end finishes available,

Q

What if there’s a problem with the pipework in the future?

Maintenance is allowed for; access panels can be included (ideal for inspecting valves), or sections can be easily removed and refitted.

Q

For more information on Pendock online, visit www.rdr.link/BJ034

I

PROFESSIONAL BUILDER NOVEMBER 2019 43

heating, plumbing & wetrooms

FIX UP

Professional Builder finds out all about a new fixing system from its inventor, Ty Harnett.

Can you tell us a little more about Alfie?

Alfie – which stands for: Adaptive, Load bearing, Fit & forget, Interlocking, Exactitude – is an all-in-one wall fixing system to accompany a variety of wall mounted brassware fittings, designed to make installers’ lives much easier.

Q

How did you come up with the idea? How will it help installers?

Current 1/2in. fittings on the market are not very strong and can put too much stress on soldered joints, making them more susceptible to leaks, especially when supporting heavy items – large fixed shower heads arms/drencher heads, wall mounted taps and bar shower valves, for instance.

Q

Alfie helps installers as the design is totally fit and forget, requires no drilling of tiles with fast fix kits or needs depth planning of 1/2in. fittings when using offset adaptors, which come with many taps and shower valves.

It also eliminates copper pipes ever needing to exit a wall, which, as many plumbers will know to their frustration, often get knocked by passing trades and even damaged. Ultimately, Alfie is designed to speed up first fix and second fix, while guaranteeing no leaks in the wall.

How easy is Alfie to fit? What’s the process?

In short, very easy! It takes around half an hour to first fix and half an hour to second fix. A brass manifold is mounted to a wall plate and a chrome tube protruded through the wall which can be cut. A unique dressing tool can then be used to put a flat face on the end of the tubes if they are cut.

Q

What kind of applications will it be ideal for?

A number of different applications, with some of the key ones including: 씰 Fixed shower heads 씰 Shower hose wall fittings 씰 Wall mounted taps 씰 Bar shower valves 씰 Converts to copper pipe 씰 Converts to our luxury isolation valves (no hot works at all)

Q

I

44 NOVEMBER 2019 PROFESSIONAL BUILDER

Equipment needed based on a typical timber stud wall when using two Alfie kits: ● ● ● ● ● ● ● ● ●

BATTERY POWERED IMPACT DRIVER ADJUSTABLE SPANNER TAPE MEASURE SMALL SPIRIT LEVEL LOCTITE THREAD CORD 8 X WOOD SCREWS SILICONE SEALANT 2 X ALFIE KITS 2 X CHROME DECOR RINGS

Have you had any feedback from installers yet?

Yes, the feedback has been positive and described as a brilliant solution for bathrooms and wetrooms.

One of the challenges installers currently face on site is being able to guarantee a 1/2in. wall fitting finishing flush with a wall where the various substrates are unknown at first fix stage (dot and dab gauge, tile adhesive depth and tile thickness). The internal 1/2in. thread solves this, but also provides a secondary seal and allows the installer to be fully in control of tightening the chrome wall fixture exactly where they want it.

Q

For further information on Alfie visit www.rdr.link/BJ035

heating, plumbing & wetrooms

Slimming world

The Slimfix clips flex inwards when lowered into a prepared cut-out.

Jeanette Ward, Communications Manager for Franke UK, explains how the company’s Slimfix innovation is changing the process of installing sinks.

The challenge of space and time For plumbers, saving time at work can mean saving money and, therefore, speeding up any part of an installation process is welcomed. Installing a sink is a common, everyday job for plumbers which, although easy to do, can be a fiddly, time-consuming process, often involving scrambling around underneath the sink area.

Traditionally, when it comes to fitting an inset sink, installers are required to use a series of products such as clamps, screws and fixing rails. The plumber will need to access underneath the sink space, sometimes a cramped and dark area, to secure in place, which can prove an uncomfortable task. It can mean additional time for each job and plumbers often wish they had an extra pair of hands and the flexibility of a gymnast!

Solving a problem Changes in product design are often the result of problems encountered over a

long time and Franke has listened to its installers, responding to their feedback to simplify sink installation and help them save both time and effort.

Franke’s Slimfix fixing system uses robust clips to anchor the sink firmly to the work surface, reducing the time spent squeezing into cramped spaces and resulting in a sink which is virtually flush with the surface.

Simplicity rules The first step, as always, is to do the cutout in the work surface using the template (where supplied) or scribing in from the overall diameter to give the prescribed cut-out size, and then waterproof sealant is applied around the edge of the space. This would traditionally be followed by ducking inside the cabinet to fix the sink in place, while holding the sink to prevent it from moving out of position. With Slimfix, the unit is simply placed into the space and pushed down to secure the clips.

This shows the Slimfix clip mid-way through installation – once fully lowered, the sink will sit virtually flush to the worksurface.

A firm connection The system features strong anchor clips, pre-fitted under the rim of the sink, which flex when the sink is placed into the space. Once in position, the clips hold the sink firmly in place without the need for any additional clamping. It also offers installation flexibility, as it can be used with any thickness of work surface material.

The fixing system is available in single bowl and 1.5 bowl sinks in the Argos, Maris, Laser, Ascona ranges and its new Box Center, alongside sister brand Carron Phoenix with its new Aruba granite range – the first time this clip system has been used on a granite range.

Knowing and understanding the challenges faced by plumbers, this faster and easier way to sink installation from above the work surface can save time and effort for the installer, while also delivering long lasting performance.

For more information on Slimfix system online, visit www.rdr.link/BJ036

I

PROFESSIONAL BUILDER NOVEMBER 2019 47

heating, plumbing & wetrooms

Antony Corbett, product manager for Geberit, shares some of the commonly asked questions about the merits of Mapress press fitting and why it is gaining such positive traction with installers.

PRESS AHEAD

I

n an increasingly competitive market, plumbers and heating installers must evolve their working practices as much as any other business. And that means adopting smarter, leaner processes that can improve productivity and profitability.

So often the key lies in the simplicity of the product innovation. Take pipe fittings, for example, where an increasing number of forward-thinking installers are switching from traditional screwed or soldered connections to press fitting, attracted by its efficiency and time-saving potential.

Changing habits Traditional jointing methods can be cumbersome and difficult to implement, and in many cases simply unsuitable and impractical for the job at hand. Of course, many installers still use solder and screwed pipe – ‘because I always have’.

In addition, the requirement for hot works is often an inconvenience at best, and an impossibility in some cases due to the site conditions or safety regulations, not to mention the cool down period,

which can add unnecessary time to any soldering job – because it’s what they learned at a younger age, or were taught as an apprentice In contrast, press-fitting can deliver a host of installation benefits, with no hot works, and no cooling down period.

Coloured pressing indicators offer easy identification of both material and unpressed joints during the installation process. There is also no need for lubrication and joints will leak until

THE BIG QUESTIONS Geberit answers three of the most commonly asked questions about press fit pipe systems: Isn’t press fitting more expensive? How are we expected to pass that cost onto our customers?

A It’s important to consider the project cost – and to get your customers to think the same. With press fit there are fewer additional materials, you can get the job done quicker, so it saves on labour, and it’s also a cleaner, tidier, less disruptive job. In virtually all cases the overall job cost benefits will outweigh the material and even tool costs.

Q

If the pressing tool needs calibrating, won’t I be left unable to work?

A The pressing tool needs calibrating after an initial two years,

Q I

48 NOVEMBER 2019 PROFESSIONAL BUILDER

pressed to show incomplete pressing during pressure testing. This means there’s no need to drain the system as it can be fixed wet.

Press fit systems such as Geberit Mapress have been proven to take 30 per cent less time to install than their traditional counterparts, according to a BRSIA report, helping reduce the cost of jobs by approximately 27 per cent compared with screwed steel pipework.

It’s no wonder so many plumbers and

then every year after that. We like to think it’s similar to a service on your car – essential to maintain performance and quality. Geberit works proactively to mitigate the impact for installers, with links to hire companies, for example, that can provide short-term solutions. It’s all about forward planning – think ahead and you’ll keep disruption to a minimum.

Soldering is a craft – isn’t press fitting just deskilling the industry?

A Quite the opposite. Despite its simplicity, press fitting remains a highly skilled process and that’s why we continue to invest in our training programmes. When people start to think that anyone can do it, that’s when corners are cut, and mistakes are made. This innovation isn’t about deskilling, it’s about saving plumbing and heating installers time – which means more profit.

Q

heating installers are changing the habit of a lifetime.

Training solutions However, despite its simplicity, pressing is by no means a job for the unskilled tradesman. As with any installation method, comprehensive training is vital to ensure that installers get the most from every application and to protect the standard of installations. Which is why leading manufacturers continue to invest in their training programmes for the benefit of those in the trade.

A market leading training provision, for example, can demonstrate what can be achieved by working in partnership with your chosen manufacturer. Much more than a product sell, these training programmes should combine best practice methods with the specific product knowledge required to maximise the quality, speed and integrity of every single installation.

A good training course will also cover

both the supply side and drainage side, giving installers the opportunity to see for themselves the benefit of press fitting over soldering.

Often this provides the insight they need to make the leap and change their method of installation.

Ask your manufacturer about the tools required, including ways you can mitigate the inevitable cost of new equipment, as well as the maintenance and calibration requirements to make sure those tools remain fit for purpose.

Once you see the benefits for yourself, it becomes clear why press fit systems are gaining such traction.

Surge in growth When we consider just what press fit systems have to offer, it’s no surprise that

they are seeing a surge in growth. Clean, reliable, easy to use – the technology can really improve efficiency and productivity for installers. With product development constantly evolving, those forwardthinking installers should always be on the lookout for more cost-effective ways of working.

To book a free training session, visit www.rdr.link/BJ037 For further information on Geberit Mapress press fitting visit www.rdr.link/BJ038

heating, plumbing & wetrooms

LIFTING SPIRITS Jung Pumpen details the lifting solutions it can provide installers with when faced with challenges on light commercial projects.

When are lifting units used?

Lifting units are used when the gradient is not sufficient to dispose of the wastewater in the existing wastewater pipe. They are also needed if the wastewater pipe is far away from the point where the wastewater is produced, or to bridge long conveying distances.

Wastewater that accumulates below the backwater level (below the top of the road), such as in cellars or other basements, is pumped into the public sewer via lifting units. If the systems are correctly installed via a backwater loop, they also provide backwater protection, meaning that water that accumulates when the public sewer becomes blocked or after heavy rainfall cannot be pushed back into the building.

This is where physics comes into play, because if the backflow loop is above the height of the top of the road, the water in the pipe cannot rise above this height and therefore cannot flow back. However, drainage during backwater is still possible as the lifting unit pushes the water out. This is the great advantage over backwater valves, where drainage is not possible during such situations.

Careful selection Depending on the quantity and type of wastewater, different systems may be appropriate.

“The decisive factor is which medium – condensate, hot water, water containing faeces or pure wastewater – is to be pumped, in which quantity, over which distance.”

I

1 I DISPOSAL OF SEWAGE CONTAINING FAECES

3 I DISPOSAL OF HOT WATER

Sewage lifting units are necessary if sewage from public sanitary facilities is produced in the basement. The wastewater flows into the tank and is pumped from there into the public sewer. In public buildings, it is important and also mandatory that the wastewater disposal system functions reliably. To ensure this, a duplex system should always be installed so that if one pump fails, the other takes over. Jung Pumpen has a variety of suitable solutions, depending on the amount of wastewater produced.

These systems have to withstand high temperatures and are The Hebefix H 100. therefore made of heatresistant materials. This applies to both the tank and the pump. Despite high water temperatures, the plastic container must not deform or leak, while for submersible pump options, the casing as well as the outlet pipe must be designed to withstand hot water.

2 I DISPOSAL OF WASTEWATER (WITHOUT FAECES) If wastewater accumulates, such as in tea kitchens, The Hebefix Plus is suited for wastewater from sinks from coffee or coffee machines from machines or from coffee shops. washbasins, in the basement and therefore cannot run off in a free gradient, then small lifting units provide the ideal solution. Compact systems can be easily accommodated in base units or prewalls due to their small size. Once again, different pumps are used depending on the amount of wastewater produced.

50 NOVEMBER 2019 PROFESSIONAL BUILDER

Plug-and-play systems are complete systems that require relatively little installation effort and are therefore designed to be easy to fit.

As explained here, it is important to select the right lifting unit for the respective application.

The decisive factor is which medium – condensate, hot water, water containing faeces or pure wastewater – is to be pumped, in which quantity and over which distance.

Quality is ultimately decisive in all applications, because pump failures are expensive in the commercial sector. For installers, the more reliable and trouble-free the system, the less chance there is of potential callbacks and downtime for customers.

`For more advice on commercial lifting units from Jung Pumpen, visit www.rdr.link/BJ039

heating, plumbing & wetrooms

What lies beneath While the performance advantages of UFH are well known, there are a number of wider benefits which are still relatively unknown, Steve Harris, Technical Services Engineer for Wavin Hep2O, explains.

What are the health benefits of using UFH? UFH uses natural radiation, with pipes beneath the floor transferring heat into a room, meaning it has little impact on air quality when compared with traditional convection heating systems, which can circulate bacteria and dust. UFH can actually inhibit the growth of fungi and dust mites, reduce the circulation of airborne allergenic particles, and potentially help minimise the risk of room occupants developing respiratory issues.

Furthermore, UFH keeps floor coverings warm and dry by circulating heated water beneath the surface.

Q

Q

Is UFH long lasting?

Traditional radiators generally need replacing at least twice in a building’s lifetime, which can be disruptive for occupants. As UFH doesn’t require additional maintenance, installers can be confident that the system will stay exactly as they left it, meaning no future disruptions caused by the need for repairs. This means that opting for UFH is an investment in a building’s future – providing a quality, long-lasting solution.

Can UFH only be used under the floor?

Many people are surprised to learn that UFH can be installed into any part of a building envelope, such as the walls of a room. This would provide an ideal solution in a room with a small surface area on the floor to maximise the potential heat output. This would be the case in a room such as a bathroom to

Q

boost output. However, we wouldn’t advise opting for UFH in walls alone, as the heat output is higher when installed under floors.

There have been cases where UFH has been installed in the ceiling of a property and this is hugely effective in some building structures, such as a block of apartments. This is because the void of the ceiling is easily accessible and the heating solution can be beneficial for both the room above and the room below. This kind of installation is more commonly found abroad because it works efficiently as a cooling system by circulating cold water.

The pipework can be set into the concrete itself, allowing the complete building structure to be heated or cooled as required.

On the subject of using UFH to cool buildings, how does this work?

Conventionally, the use of UFH to cool buildings is much more common in hotter countries. While it is uncommon in the UK, specifiers and contractors are increasingly turning to UFH over traditional air conditioning systems as spaces become smarter and summers warmer.

Q

Underfloor cooling systems use chilled water, sourced via air or the ground which is circulated through the pipes to cool the building. The temperature is then reduced through the transfer of energy by radiant heat exchange to a temperature lower than the air above.

The components are identical for heating and cooling UFH systems, the only major difference is the control systems involved.

Underfloor cooling requires more complex controls which automatically change from heating to cooling, as well as controlling the dew point when in cooling mode.

It is important to note that underfloor cooling systems can only work with a limited variety of flooring types. For example, stone, ceramic or LVT (Luxury Vinyl Tile). In such cases the floor temperature must never be cooled below the dew point because of the risk of condensation forming on the surface. This reduces any risk of homeowners injuring themselves on a slippery surface.

For more information and advice on Wavin Hep2O’s UFH range, visit www.rdr.link/BJ040

I

PROFESSIONAL BUILDER NOVEMBER 2019 53

heating, plumbing & wetrooms product round-up

WETROOM FORMER Combining all the benefits of AKW’s existing Tuff Form former with a new octagonal fitting plate, the new Tuff Form8 allows for up to 15 different waste positions, ensuring an easier installation. With preformed fixing points and an octagonal waste plate, all obstructing joists can be navigated. In addition, made from high strength sheet moulding compound, the system has a weight capacity of 381kg, making it suitable for heavier wheelchair users and their carers.

For more details online, go to www.rdr.link/BJ042

GAS FIRED BOILER With outputs of 25kW and 30kW, Worcester Bosch’s Worcester 2000 natural gas fired boiler is quick to install and has the same flow rates as the existing Greenstar i. It can pipe vertically to the boiler and is simple to specify with maximum flue lengths of 12m horizontally and 15m vertically. At the heart of the boiler is an improved C6 heat exchanger, which can modulate down to as little as 4.8kW. For more details online, go to www.rdr.link/BJ041

SHOWER BUNDLE

DUAL CONTROL MIXER VALVES

Grohe has introduced its one-box shower bundles for its one-function models.

Comprising the Tempesta 110 shower head, a Rapido Smartbox, shower outlet elbow and a Grohtherm thermostat with a one button interface, the bundles offer a complete SmartControl package at a more affordable price point.

For more details online, go to www.rdr.link/BJ043

Shower specialist, Aqualisa has launched Mian, a new range of dual control mixer valves. The robust valves comprise single, dual and triple outlet variants with a choice of wall plates and control dials. The range blends clean lines, modern aesthetics and compact shaping, aiming to create an overall feel of quality. The system carries a full set of accessories to give designers and specifiers bespoke options and flexibility for showering and bathroom projects.

For more details online, go to www.rdr.link/BJ044

HEATING PIPES A new multilayer pipe system, VSH MultiPress is described as a quality, plastic-based piping system.

The pipe features an aluminium layer with additional inner and outer layers of polyethene, whilst the way these layers are linked delivers enhanced resistance to loads generated by internal pressure and high temperature. The aluminium means there is minimum linear expansion, which delivers a performance comparable with copper, and the smooth surface prevents the build-up of scale and other debris.

For more details online, go to www.rdr.link/BJ045

SHOWER WATERPROOFING KIT The Shower Waterproofing Kit from Dunlop has been specially designed to include everything required to allow the tradesman to waterproof a shower area, wetroom or walk-in shower area.

Suitable for any internal intermittent area where continued exposure to water may cause damage, the kit fully waterproofs the background behind a tiled surface to prevent water penetration up to 1.5m high in a two-walled shower unit or 1m high in a three-walled shower unit.

For more details online, go to www.rdr.link/BJ046

SYSTEM MAINTENANCE PRODUCTS To reduce time spent on site, Fernox has reformulated its Cleaner F3, Protector F1 and Protector+ Filter Fluid products.

The new formulations have a higher concentration of the main active ingredients, so a new 500ml bottle or 400ml Express canister within the ‘F’ range can now treat a 130-litre system – up from a 100-litre system previously – 16 radiators, and 250m2 of underfloor systems. The protection products feature improved pH buffering, meaning the occurrence of corrosion formation is significantly reduced in the system.

For more details online, go to www.rdr.link/BJ047

I

54 NOVEMBER 2019 PROFESSIONAL BUILDER

PIPE FITTINGS When it comes to installing pipework, manufacturer Maincor argues that its mechanical fittings significantly reduce installation times. The firm’s brass compression fittings for joining Flextra Pipe and making building connections feature two bolts; one for opening the fitting and one for tightening it onto the pipe, offering ease of installation. This minimises the potential for human error, whilst reducing fitting times.

For more details online, go to www.rdr.link/BJ048

PROFESSIONAL BUILDER NOVEMBER 2019 55

vehicles & plant 씱

A ‘site’ to behold This will mean other bidders won’t have enough time to enter another bid if you have outbid them, and although the same applies if your bid isn’t the highest, it also stops you from going over your budget in the heat of the moment.

eBay is the world’s most popular auction site and can make buying a breeze. But how does it work? Dan Powell, editor of Honest John Vans, explains.

B

uying a second-hand van can be a time consuming and occasionally nerve racking process, with thousands of private sellers and traders vying for your attention. Wouldn’t it be great if you could simply browse all of the deals in one place?

Well, now you can, thanks to eBay. It has more than 30,000 listings, which makes it a great one stop shop for a huge variety of vans being sold by dealers, hometraders and private individuals.

Getting started is easy too. And once you’re signed up to an eBay account you can set up search alerts, enter your location and specify the type of van that you want. Everything will then appear in the form of a simple notification to your email inbox or smartphone.

How does eBay work for van buyers?

Although eBay is billed as an auction site, vans can be bought in a variety of different ways. These include: 씰 Auction – Where the vehicle is sold to the person who makes the highest bid within a timed bidding process. 씰 Classified Advert – Buyers contact the seller directly to view the van before paying the advertised price. 씰 Buy It Now – Vehicles are advertised at a set price and sold instantly online. 씰 Best Offer – You offer the seller a price

on a Buy It Now item and they decide whether to accept, reject, or counter your offer.

Stay safe when paying

Your rights when buying a van on eBay If you buy from a private seller on eBay then the van must be ‘as described’, and if it does not meet this, admittedly, vague description, you can raise a dispute with eBay. Buying from a dealer on eBay grants you additional legal rights, as you would buying from any business under UK law.

Businesses selling on eBay must provide certain information to you under the Electronic Commerce Regulations 2013, including full contact details, membership of any trade bodies, clear pricing, delivery and tax charges plus a VAT number if applicable.

Bid to win With an auction-style listing, timing is everything. Make a careful note of when the auction ends, and be ready a good five minutes before the sale expires. Enter the absolute maximum you are prepared to pay 30 seconds before the end of the auction, but don’t confirm your bid until there are only five seconds remaining.

If you have won the van it’s important to ensure you take precautions when paying and collecting it.

PayPal payments offer a degree of protection, and arguably more so for buyers than sellers, and the fee charged for the service comes out of the seller’s payment, so it is a good option for buyers.

Cash in hand works if you are comfortable carrying the required amount of money – you may be able to arrange the exchange at your bank if the seller agrees. Electronic payments are virtually instantaneous between most banks, but you can also use the government’s CHAPS system for added security.

Payments made via ESCROW are also secure, but only if the associated company is legitimate, so always be cautious.

When collecting the van, ensure all the paperwork tallies and you have organised the insurance and road tax before driving off. Ensure the name and address on the V5C (logbook) matches the details of the seller and location of the vehicle. Always ask the seller for two forms of identification to ensure they are the person that’s listed on the V5C registration document.

For more van buying and selling tips visit: www.rdr.link/BJ049

I

PROFESSIONAL BUILDER NOVEMBER 2019 57

WILD AT HEART! T

he Professional Builder car park is no stranger to light commercial vehicles awaiting their own special road test, although, over the years, we have to confess few have attracted more than a cursory glance from those going about their daily tasks at Hamerville Media HQ. To the uninitiated it’s probably fair to say that one Transit looks the same as the next Transporter or the Combo a mirror image of its Partner and Berlingo cousins.

There is, however, an exception to this rule. A particular category of vehicle that never fails to get the tongues wagging – and it can be summed up in two words... pick-up. The past few years have seen a proliferation of new models in this once pretty unremarkable sector, as it becomes all about getting the work/lifestyle balances in perfect harmony. How many

I

owners actually swap the muck and bullets for a surf board at the weekend is open to debate, especially in Watford, but there is no doubt that the pick-up has metamorphosed into a very significant player in the LCV marketplace.

Like a lot of the biggest names in vehicle production, Ford had dabbled in the UK pick-up market for a good many years (who could forget the P100) with moderate success, but things got a whole lot more serious in 2012, with the launch of something more in keeping with the big and brash lifestyles of those across the pond.

As rough and as tough as they come, the first Ranger was like the new gunslinger in town, given a wide berth by all those who had previously talked the pick-up torque. Its throaty five cylinder, 3.2TDCI litre engine, solid rear axle, leaf springs, with market leading payloads of up to 1,300kg, and substantial load carrying capacities – plus the ability to tow a steam locomotive – winning it a posse of new admirers from west to east.

But, as we all know, the narrative never ends just like that, of course. The other protagonists have all grown up a bit themselves in the ensuing seven years, and the Ranger today has some serious competition, both in appearance and performance.

58 NOVEMBER 2019 PROFESSIONAL BUILDER

Professional Builder gets to see whether the special Edition Ford Ranger Wildtrak really does have the X factor.

In fairness, Ford was never going to simply rest on its laurels and the Ranger has benefited from a series of tweaks and updates now extending to an entry level XL, the XLT, Limited and the Wildtrak, all of which we have driven at some point over the last few years. However, it seems they have saved their very best till last, (or, at least, we thought we had – see below) culminating in the latest, plushest Wildtrak X, designed unashamedly to take the shoot-out firmly to the likes of the new Mercedes X class, and the impressive Amarok, whose carlike cabins, and performances, are the new benchmark for pick-ups, not least with on the road costs nudging past £40,000.

With just 1,000 made, the special edition six speed automatic (4x4) Ranger Wildtrak X gets a number of visual styling tweaks, an exclusive standout blue paint job with lots of trendy black trim. There’s a locking cover as standard to the load area, 18in. alloy wheels and extra convenience and safety kit.

Ride performance is largely what we recall from past experiences with other Ranger models – namely plenty of power and responsive handling. The ride generally improves with load and speed, and the high driving position gives a commanding view of what’s going on

vehicles & plant 씱

around you. All the generous standard Wildtrak spec is there, of course, including reversing camera, interior lighting, with dimmer control, climate control and infotainment system, with satellite navigation and SYNC 3. One little niggle was the sticky handbrake, which never quite returned to its starting point on release, bleeping away until properly engaged with an extra push.

Netted cloth has been replaced with a premium leather upholstery with Wildtrak stitching. Scuff plates and floor mats unique to this model are there for those who have the temerity to get in with muddy boots! Ford actually lists 33 different key features – too many to go through here – but nothing you wouldn’t really expect from a vehicle at the very top end of the scale.

And there’s the rub. Ford quotes £33,574 for the Wildtrak X rising to £40,350 for our test vehicle, with a smattering of options, which is clearly a lot of money for those more accustomed to paying a good ten thousand pounds less for what are, in many respects, an impressive line-up of perfectly acceptable workhorses.

Of course, if business profile is important, order books are full, and you think envious glances in the builders’ merchant’s yard, at the supermarket, or down by the lake, is worth splashing out a bit more for, then the call of the Wild will be hard to ignore.

Unfortunately, even that sort of investment won’t necessarily give you the best pick up in town, because Ford have now gone and taken the four wheel driving experience to a totally unprecedented level. The new Ranger Raptor combines the brashness of its American F-150 cousin and the sophisticated engineering modifications of Daker-style rally specials to create a vehicle which in terms of go anywhere performance has “no straight from the dealer” equal in the UK. If you thought the standard Ranger had been on steroids then this is the Incredible Hulk and the Terminator rolled into one, with significantly enhanced bodywork, including flared wheel arches, meaty 17in. BF Goodrich tyres (sidewalls are 20 per cent stiffer too), a front bumper attached to the chassis and skid plate with specific tow hooks. It’s also 44cm wider, 168cm longer, 52cm taller while the ground clearance has swollen by 51mm. The departure angles are also improved and, just in case there was any doubt to its pedigree, it has Ford stamped in huge letters on the front grille.

The standard leaf springs have been ditched for coil springs, with Watts linkage to the rear, and the whole chassis has been strengthened to enhance the driving experience for both normal and extremely abnormal terrain. One special setting – which may be unfamiliar to many LCV aficionados – is BAJA, Daker rally mode where the engine and chassis are set up to cover rough ground very quickly indeed. Our off road test route in deepest Sussex was hardly the Sahara desert, but we quickly got the message that there’s not much out there that this ultimate vehicle predator wouldn’t devour in double quick time.

Somewhat surprisingly all that For further information on the Ford Ranger testosterone and machismo doesn’t pick-up range visit www.rdr.link/BJ050

extend to the engine, which is the pretty unexceptional 2.0 litre four cylinder diesel engine pushing out 210bhp. Thanks to its two turbos, it’s still a punchy engine, which creates slightly more power than the 3.2 litre unit available with other Rangers, but it’s been developed with one eye clearly on the UK’s on-going propensity to frown on the habitual gas guzzlers.

Six driving models are designed to change the driving experience, all of which are pretty faultless, it has to be said, and interior-wise, the comfort levels and trim are right up there with a top of the range saloon. But then again at an onthe-road price approaching an eye watering £50,000 you really wouldn’t expect anything less. And there’s another not insignificant niggle – with all the modifications, the payload drops from one tonne to just 680kg and the Raptor can pull 2.5 tonnes rather than 3.5 tonnes.

Fine if you loading a couple of bikes and a surf board, but not for a tradesman who faces the prospect on paying VAT on a vehicle which fails to meet the current criteria, although you do pay commercial vehicle VED. The Raptor may be at the very top of this particular food chain but its cost of ownership will ultimately, one suspects, make obvious prey somewhat hard to find.

I

PROFESSIONAL BUILDER NOVEMBER 2019 59

vehicles & plant 씱

REHEATED DUCATO! It doesn’t take a sun drenched Turin to prove that the Italians, and plenty more besides, still have the hots for the Fiat Ducato

A

great big chunky cargo carrier is not the sort of image one usually associates with traditional Italian flair and design, but they clearly have a keen eye for practicalities, because, when it comes to panel vans, the super economic and reliable Ducato has achieved iconic status on home soil.

It’s been Fiat’s commercial flagship offering for more than 35 years and a new

update is always greeted with much anticipation and fanfare in Italy’s automotive capital. Last facelifted in 2014, this latest offering is part of what the company calls the MY20 project, although it’s fair to say that the Ducato still isn’t the most modern looking amongst some particularly strong, relatively handsome competition in the large van segment.

What is does have, however, is tremendous versatility, with very high

payloads, impressive on paper fuel economy, an extremely space efficient load area and a huge number of build variants to choose from, so, in good old fashioned workhorse terms, it is always worthy of consideration.

Visually there is little difference – some titanium coloured trimmings and black headlight surrounds the most notable – but, significantly, the new Ducato benefits from the move to an all

I

PROFESSIONAL BUILDER NOVEMBER 2019 61

vehicles & plant 2.3litre engine line up, each one equipped with variable geometry turbo charger and compliant with the latest Euro 6d-TEMP emissions regulations. Those familiar with the not altogether satisfactory changing action of the previous Comfort-Matic gearbox will also be pleased to see the introduction of a more efficient nine speed auto option. There’s plenty of power and torque on offer, but the ride is at best firm, and the ageing seat design would, one suspects, provide only a modicum of comfort on a longer drive than our test run at the foothills of the year round snowcapped Alps.

Inside, the dashboard and control layout remains largely the same, with plenty of storage space and a useful fold down centre back section, which doubles as a mobile desk. There is an improved infotainment system on offer, with Apple CarPlay and Android Auto for the first time, and a full range of driver assist facilities, including blind spot assist, lane departure warning, traffic sign recognition

ELECTRIC DREAMS Approaching its fortieth birthday and, despite the welcome changes, the Ducato is clearly beginning to feel its age, but life could be about to begin all over again in 2020 when it will become the company’s first ever all electric van. And with it comes the promise of performance criteria that Fiat believe will transform the old workhorse into a bona fide thoroughbred. and full brake control, which can automatically identify obstacles and apply the brakes, should the vehicle be in danger of a collision. All vehicles come with a standard Eco Pack, which includes the start and stop system, the smart alternator, electronically controlled fuel pump, which guarantees energy savings, and greater combustion efficiency – all aids to total cost of ownership.

While the new Ducato is only available in front wheel drive, it still offers potential

customers a huge amount of choice, with over 1,000 body length, roof height and wheelbase variants across panel vans, window vans, chassis cabs, truck bodies and conversion platforms, around 10,000 options in total. Particularly advantageous for conversions is that all of the powertrain elements are confined within the dimensions of the cab.

For more information on the new Fiat Ducato online, go to www.rdr.link/BJ051

rdr.link

QUICK LINK FOR MORE INFO

rdr.link

Bookmark into your browser and simply enter the unique 5 digit code for even faster access to more information.

I

62 NOVEMBER 2019 PROFESSIONAL BUILDER

vehicles & plant

enter the dragon The Ssangyong Musso is one dragon you won’t have to train. Professional Builder’s Lee Jones gets behind the wheel.

W

ith some of the most recent entrants to the pick-up market unashamedly courting the high end, the line between SUV and pick up has become increasingly blurred of late. Indeed, it could be argued that many of the new entrants are not only eyewateringly expensive, but as compatible to a construction site as a pair of stilettos. For the muddy boots brigade that delicate balance of family friend and builders’ tool is still the ideal, and one manufacturer claims to have struck just that.

Although they have made significant inroads in recent years, SsangYong might still be unfamiliar to some, but this Korean 4x4 specialist is actually that country’s oldest vehicle manufacturer, with some 60 years of experience in the sector.

‘Musso’ translates as rhinoceros and, with the latest model, this is one LCV that is certainly on the charge when it comes to industry recognition.

Even before you get behind the wheel what should immediately grab your attention is an unprecedented 7 year/150,000 mile warranty, covering all of the major

mechanical components over that period, as well as the battery and paintwork for three years. Add to that a 3.5 tonne towing capacity, and a 1-tonne payload, and it already starts to look more at home amongst the muck and bullets of a building site than some of its contemporaries. So much so, in fact that Highways England has put its faith in the Musso with a major contract award.

Value for money Whilst we’re in the business of considering figures another welcome number is a price tag of just over £25,000 – but just what will you get for your money? As the maker’s badge reveals, SsangYong is Korean for ‘twin dragons’ and it is a moniker that matches a muscular ‘ultra-strength’ steel quad frame body. A 2.2 litre Euro 6 engine delivers a maximum 181hp, and is available as either a six speed manual or six-speed Aisin automatic. Musso’s selectable 4x4 provide the obligatory combination of 2wd high range, 4wd high range and 4wd low range, all of which makes it more than

capable of handling whatever off road challenges a builder can lay in its path.

It’s the double wishbone front suspension and rear mounted coils which allows the Musso to master heavier loads, but the pay-off is a stiffer suspension than on some of its rivals. That said, add a load to the back and the experience is altogether smoother and, given that the trend in the pick-up market is currently for ever bigger beasts, few can currently claim to be particularly nimble on the road.

The detail in the design betrays that these are wheels made for working, with a load bay that will accommodate a Euro pallet, rotating hooks to strap down loads, and 12V/120W outlets in the rear for power tools. Step behind the wheel, however, and the level of comfort belies the price tag, with some of the best leg room in the double-cab class, and Nappa leather seats at the top of the range.

Add the epithet ‘value for money’ to anything and there may well be an inclination to make judgements about quality, but the Ssangyong Musso actually compares very favourably with some of its more established competitors. Indeed, this is one Rhino that is certainly not going to be an endangered species any time soon.

For further information on the SsangYong Musso online visit www.rdr.link/BJ052

I

PROFESSIONAL BUILDER NOVEMBER 2019 63

vehicles & plant

Conversion club Professional Builder’s Kieran Nee travels to Telford to meet Ingimex, the company behind Volkswagen’s tippers and dropside vans.

I

t might not quite do justice to the complexity behind Ingimex’s body conversions, but describing the process as ‘off-the-shelf’ is, in fact, a huge compliment. That’s how its seamless integration with Volkswagen’s Crafter and Transporter vans has been described, and it’s easy to see why.

It’s a testament to the logistics and engineering at play that customers purchasing a tipper or dropside van from a dealer may not even realise that a third party has played a role at all. The Engineered to Go initiative offers Volkswagen customers a selection of pre-defined bodywork options, which they can order directly at the dealership, seeing the price upfront alongside the usual specifications. The scheme offers an easy way for customers to get the conversions that they want, plus a single invoice, matching vehicle/conversion warranty and peace of mind.

Ingimex make their way through a phenomenal amount of vehicles, producing 3,000 bodies each year. Most of the components used by the firm are produced on site in Telford, a site which measures nearly 7 acres. The company has invested £1.8m in the factory over the past year, which now includes manufacturing capabilities including 3D CAD product design, turret punching, laser cutting folding machines, MIG/TIG welded fabrications, CNC milling and punching with multi axis section bending and a hydraulic test rig with corrosion testing capabilities. The company plans to carry on investing around £500,000£800,000 in its premises each year.

I

Volkswagen account for 24 per cent of Ingimex’s annual output, which is a mix of the core products they offer and more specialised offerings. The process is a simple one, with the average conversion taking only around 40 minutes. The van reverses from the yard into one of the

64 NOVEMBER 2019 PROFESSIONAL BUILDER

A LOOK AT THE DROPSIDE… Market leading payload Powder coated aluminium corner posts extend above board height to form lateral stops.

Three level load lashing and a 400kg gantry capacity.

Board and lock assemblies tested to a burst load of 1.7 tonnes.

Platform is a one piece, 15mm thick, full birch non-slip deck, top fitted for easy replacement. …AND THE TIPPER Platform is made from high tensile steel and dip e-coated in a six stage process for long lasting finish Double skinned aluminium sideboards used throughout Strong and striking tailboard with side mounted locks to eliminate trapped fingers

three bays, where all the components and tools needed are neatly arranged. Part of the Ingimex philosophy is that as much as possible is bolted together rather than welded, meaning it can be put together more easily and, if any repairs need doing, can be more easily taken apart.

This process enables the workers on the floor to get through 12 dropsides, 8 tippers and 7 Lutons a day.

Aluminium is the metal of choice.

Although pricier, the material is a lot lighter and easier to handle than steel. Of course, you can’t do anything to reduce the strength of the bodies, and the design process is a careful balancing act between weight and strength.

Thanks to the likes of Ingimex and Volkswagen, the tipper truck is undergoing something of an image revamp. Tippers and dropsides are enjoying their moment in the sun as professionally minded builders wise up to their potential. The smart, modern finishes on Ingimex’s products certainly help in this regard, and you can no doubt expect to see more of these conversions fly off the shelf in the coming years.

For more information on VW’s Crafter conversions go to www.rdr.link/BJ053

vehicles & plant

SMALL WONDER A

The muck-carrying workhorse of the building site is getting an upgrade in the shape of the 1T-2 HT, the most compact machine in the JCB site dumper portfolio. Dan Gilkes explains all.

I

s a class of machinery, the site dumper has been under significant scrutiny, with changes aplenty up and down the weight ranges. JCB has been at the forefront of some of those innovations, addressing issues of visibility, and operator comfort with its Hi-Viz models, for instance, but there have equally been improvements throughout the range.

As a result the Staffordshire manufacturer has also updated its smallest site dumper, with the launch of the 1T-2 HT, the first of the company’s second-generation dash-2 models. The 1tonne high-tip machine comes with a Stage V/Tier 4 Final compliant diesel engine and adopts the two-pin articulation joint and all-steel construction of its larger stablemates. It also benefits from the latest safety improvements, including JCB’s seat belt logic, that prevents the dumper being used unless the lap belt is fastened with the operator in the seat.

For a 1-tonne machine, compact dimensions are a vital part of the design and at just 980mm wide on narrow tyres, the 1T-2 HT certainly meets that criteria.

Even on the standard tyre, the machine is just 1,106mm wide, making it easy to thread through confined site entrances and doorways. That said, the dumper feels very stable when travelling on rough ground, even with a full skip.

The 1T-2 HT is powered by a naturally-aspirated Perkins diesel engine, delivering 21.6hp (16.1kW). This engine meets the forthcoming EU Stage V emissions regulation without any requirement for exhaust aftertreatment or a diesel particulate filter. Hydrostatic drive, powering four individual Poclain Twin Lock wheel motors, ensures maximum traction and ease of use, while hydrodynamic braking uses the rear wheel motors to stop the machine as you lift off the throttle. A standard emergency parking brake makes this one of the safest

66 NOVEMBER 2019 PROFESSIONAL BUILDER

compact site dumpers on the market.

As the HT in the name suggests, the 1T-2 is a high-tip design, which can tilt the skip at ground level or as it is lifted to a maximum load-over height of 2,392mm.

That is easily enough to load into a standard site skip, for easy site clearance.

It offers a heaped capacity of 554 litres, making it a useful proposition on a landscaping or housebuilding project.

Though only weighing in at 1,515kg, the compact dumper can handle a full 1-tonne payload, even in high tip operation.

However, that low operating weight makes it possible to tow the dumper behind a 3.5-tonne van or 4x4 pick-up, making it easy for a contractor to move it between sites. As with all of JCB’s site dumper models, the 1T-2 benefits from an all-steel construction, giving it the strength to stand up to regular site use.

A folding ROPS frame is standard, along with a reversing alarm and a high-

visibility lap belt. JCB’s sequenced drive inhibit system means that the operator has to be sitting in the seat, with the lap belt fastened, before the dumper will move. The machine also sounds a movement alarm as forward or reverse gears are selected to warn other operatives on site.

Options include JCB’s LiveLink telematic system, that can be used to provide location and operational data. Customers can also specify road lights, rear view mirrors and high visibility paint for the steps and handrails.

The entire seat base can be raised to provide access to the engine for daily checks and service work, while the articulation joint now uses the same robust two-pin configuration that can be found on JCB’s larger 3-tonne models, boosting longevity and reducing the risk of wear.

Compact site dumpers remain a popular choice for a variety of jobsites, providing a perfect match for a mini excavator or a smaller backhoe loader. The second generation 1T-2 HT maintains JCB’s position in the sector, while meeting upcoming emissions regulations. With easy to use hydrostatic drive and high lift capabilities, the 1T-2 HT should appeal to contractors.

For further information on the JCB range of site dumpers visit www.rdr.link/BJ054

I

PROFESSIONAL BUILDER NOVEMBER 2019 67

THE TRADESHOW BUILT FOR THE TRADE PROFESSIONAL BUILDER

TOOLFAIR 2019

POWER TOOLS

NEXT SHOWS

•

HAND TOOLS

•

BUILDING EQUIPMENT

All the latest tools, live demos, show specials – all under one roof!

Sandown Park, Surrey: Thur 7th & Fri 8th November 2019 Alexandra Palace, London: Wed 29th & Thur 30th January 2020 Featuring:

Register for free at www.toolfair.info

vehicles & plant 씱

what a belter!

M

echanisation is now more than well-established on site but there are still some parts of the build process where we might lag behind our continental cousins. The Truxta from Tufftruk has, for example, become a successful British export, with significant sales growth in Europe and across the Atlantic year on year, but many British contractors, particularly on smaller sites, could equally benefit from the productivity gains associated with a pedestrian mini dumper.

With significant expansion and new product lines, a Staffordshire manufacturer is continuing to talk ‘Tuff’.

Professional Builder’s Lee Jones finds out more.

Whilst room for growth there undoubtedly still is, consistent expansion over the last few years has seen the company relocate to a new 7,000 sq ft home in Leek, Staffordshire – a considerable upgrade on its previous premises. From here the established range of powered wheel barrows will be assembled and distributed, whilst they are now joined by a new line bearing the ‘Tuff’ brand. Launched into the UK at the Plantworx exhibition in June, the Tuffbelt conveyors are already popular across the Channel, with the Belgian manufacturer,

Etramo counting some major hirers amongst its customers.

In the UK, end users will no doubt see the benefits of a solution that combines simplicity with durability. Tuff by name and tough by nature, these are units with the kind of inherent robustness that a materials handling machine demands, with reliability enhanced by a simple mechanical construction, and a sturdy galvanised steel frame. Thanks to the pallet fork pockets on the side, transportation with a telehandler or fork lift is easy, and up to six can be stacked vertically, whilst the addition of a wheel kit means each one can easily be pushed around site by one person.

In use the Tuffbelt has any number of applications, and will no doubt find favour in the likes of the still prospering basement construction market but, because several conveyors can be linked together using just one power source, and considerable lengths achieved in the process, any number of projects can benefit, from landscaping and renovation to demolition. There are a variety of sizes available from 2 – 6 metres, with a moveable support that allows each Tuffbelt to be placed exactly above the next one. Not only that, but because they are completely independent of each other they can also be set up at an angle. There is just one belt speed of 24m/min on

I

PROFESSIONAL BUILDER NOVEMBER 2019 69

vehicles & plant 씱

“Not only are they the colour synonymous with sustainability but, with 90 per cent of machines sold powered by nothing more than a 24V electric motor, there’s no noise, no fuel, and no emissions – a considerable advantage when operating within our inner cities.” these 110V machines, which will convey up to 50 tonnes per hour, it can be easily cleaned, and the belt is provided with the reassurance of a 5 year guarantee.

The same manufacturer’s Truxta mini dumper has already found favour in the construction sector, with its hydrostatic drive, compact dimensions and articulated frame making it a manoeuvrable solution on even the most compact of sites, where it will even fit through doorways. Add to that a choice of skip capacity of either 300kg or 450kg and a single groundworker armed with one of these green machines will be considerably more productive. Not only are they the colour synonymous with sustainability but, with 90 per cent of machines sold

I

powered by nothing more than a 24V electric motor, there’s no noise, no fuel, and no emissions – a considerable advantage when operating within our inner cities. Alternatively, petrol or diesel powertrains are also available.

Thanks to a new development, however, the Truxta and Tuffbelt can now come together as a single materials moving solution. The larger Truxta 450 mini dumper is now available with an electric powered tipping ram. As a result, the Power-Tip model has an increased skip discharge height of 252mm, with the Power-Tip-Plus increasing that height to 589mm, which makes it ideal for conveyors. There’s a steady movement for controlled tipping of the likes of

70 NOVEMBER 2019 PROFESSIONAL BUILDER

concrete and, because the skip capacity and dimensions remain the same, existing owners of the electric Truxta 450 have the option of retrofitting the Power-Tip or Power-Tip-Plus system. Industry insiders will, of course, already be aware that the team behind Tufftruk, Andrew Simpson and Ron Blackhurst, have a wealth of experience in the light construction equipment sector, with the likes of Bergmann in Germany and Multiquip in the US already buying into the Truxta concept. With its new range of conveyors these ‘Tuff’ customers have come up with another belting idea.

For more information on Tufftruk online, go to www.rdr.link/BJ055

vehicles & plant 씱

it’s cool for cat Nick Johnson makes good use of the Caterpillar Customer & Training Centre at Desford to try out the manufacturer’s new mini excavator.

W

hilst Caterpillar is a very respected name it is up against some very popular and wellestablished mini excavator brands in the UK. The company entered the mini excavator market later than others in 1998 through the Shin Caterpillar Mitsubishi joint venture with machines made in Desford, Leicestershire. In subsequent years the range expanded and other Caterpillar factories around the world took over making different models.

Since 2010 Caterpillar has sourced its smallest (under 3.0 tonnes) mini excavators from Wacker Neuson in Austria under a badge engineering agreement. However, in 2016 Caterpillar announced that it intended to shift design and production of small minis to its own facilities and the new models that have appeared this year are the result.

The 1.5 tonne class 301.5 has standard tail swing and is fitted with a canopy.

Other Next Generation models include the 301.6 (1.5 tonne class, standard tail swing, with cab), the 301.7 CR (1.7 tonne class, compact radius, with canopy), the 301.8 (1.8 tonne class, standard tail swing, with either canopy or cab) and the 302 CR (2.0 tonne class, compact radius, with

either canopy or cab).

All models are available with a variable width undercarriage.

These new all Cat minis all utilise a 14,3kW (19.2hp) Stage V emissions compliant Cat C1.1 three-cylinder diesel and load sensing hydraulics. An exclusive feature for the new Next Generation models is the stick steer system that Caterpillar has previously used successfully on its skid steer and compact track loaders. Now installed for the first time in an excavator, this system allows the operator to switch (with the touch of a button) from conventional lever/foot-pedal steering controls to left-hand joystick control.

The 301.5 standard tail swing mini excavator is only available with canopy – and is the entry level model in the range, but it does come with many of the new features – and industry firsts for this size of machine – including stick steer, an intuitive Next Generation LCD monitor and cruise control.

Lower Cost Caterpillar claims that its new 1 to 2 tonne mini excavators provide up to 15 per cent lower total ownership cost (compared to previous models) due to extended service intervals, more common parts, lower repair costs and the use of a tilt-back canopy/cab. The company also contends that the newcomers are up to 20 per cent more productive (versus competition) in travel and trenching aided by customisable operator settings and cycle time improvements.

I went trenching with the 301.5 at Desford and I was impressed by its performance. There was plenty of digging power and the slew was very precise.

Fuel economy is added by the new auto idle function and there is a clear fuel gauge on the well-positioned LCD monitor.

The most interesting new feature on this and the other new generation Cat compact excavators is the stick steer function. By depressing a prominent yellow button on the top of the left hand joystick this control changes from the usual dipper and slew function to travel direction and steer.

The 301.5 retains the usual travel levers but using joystick steer means you can move the machine whilst still sitting back comfortably in the seat. No more hunching forward over the travel levers which, when traversing rough ground, is not good for operators with bad backs.

I found that the stick steer function helped me to more quickly backfill the trench that I had dug. The joystick control of the steering made it easier to do spin turns more comfortably. And, usefully, the mini also benefits from having both two speed (2.9 and 4.4km/h) tracking and dozer float as standard.

For further information on the CAT range of mini excavators visit www.rdr.linkBJ056

I

PROFESSIONAL BUILDER NOVEMBER 2019 71

vehicles & plant product round-up

MIDI EXCAVATOR Improvements to the 8 tonne Kubota include a Stage V emissions compliant engine, whilst the enhanced hydraulics improves front end operation. The KX080-4 features a Kubota V3307CR-TE5-BH-1 powertrain rated at 46.5kW (63.2hp), with Eco e PLUS mode providing further levels of fuel efficiency. A new 2pump load sensing system improves the overall smoothness of operations when using the front attachments.

For more details online, go to www.rdr.link/BJ057

VAN The Vauxhall Movano van now benefits from a wider range of BiTurbo engines, all claiming to offer higher power, more torque and greater efficiency than ever before. With low fuel consumption and long service intervals, the new engines are built to reduce the cost of ownership for operators. The 2.3litre power units range from 131 PS to 180 PS and all comply with the Euro 6d-TEMP (light duty) or Euro V-Id (heavy duty) emissions standards.

For more details online, go to www.rdr.link/BJ058

ELECTRIC EXCAVATOR The Bobcat E10e is the world’s first 1 tonne electric miniexcavator, combining zero emissions, low noise and a width of just 71 cm, allowing it to easily pass through standard doors and in and out of lifts. The digger has a state-of-the-art lithium-ion, maintenance-free battery pack with an advanced management system, designed to fit within the standard machine envelope to maintain the machine’s ZTS profile, matching all the parameters and dimensions of the standard diesel-powered equivalent.

For more details online, go to www.rdr.link/BJ059

PUSH-AROUND LIFT Whatever work needs to be done indoors at height, its maker claims, can be done easily with the X3X push-around scissor lift from BoSS. Its compact size means standard doorways and narrow corridors are no obstacle and it’s lightweight enough to take in a standard passenger lift. With a safe working height of 5.2 metres, the box-section scissor construction is stable, and a tilt sensor with alarm gives users additional peace of mind.

For more details online, go to www.rdr.link/BJ060

I

72 NOVEMBER 2019 PROFESSIONAL BUILDER

PICK-UP The new Mitsubishi L200 Series 6 has been engineered to be the most capable pick up the firm has produced, introducing what it calls car-like levels of driving refinement. The pick up remains tough and dependable with an increased payload of 1,080kg and gross train weight of 6,155kg, plus an upgraded 4WD system further to enhance the off-road ability. Under the bonnet, a new Euro 6d compliant 2,268cc turbo diesel engine and a new six-speed automatic transmission help deliver lower emissions and improved fuel efficiency.

For more details online, go to www.rdr.link/BJ061

NEW ENGINE The Fiat Professional Doblo MY20 has added a new engine to its popular model line-up with the introduction of the 1.3-litre MultiJet 80hp engine. With a load area of up to 5.4m3 and payload of up to 1 tonne, the van is suitable for a range of construction tasks. The van is now more versatile than ever with its new engine line-up.

The 1.3-litre MultiJet engine is now available with a choice of two power outputs, 80hp and 95hp, while the 1.6-litre MultiJet engine can deliver either 105hp or 120hp.

For more details online, go to www.rdr.link/BJ062

VAN TRIM MS-RT has revealed the first pictures of its all-new Ford Transit Connect, a new model to sit alongside its Ford QVMapproved Transit Custom Conversion. The conversion consists of a full plastic injectionmoulded body kit and includes a uniquely styled front bumper, grilles, front diffuser, side skirts, rear bumper, rear diffuser and spoiler. In addition, it gets a stainless steel sports exhaust system, 18in. OZ Racing alloy wheels with an optional limited edition bronze finish, a carbon inlay sports steering wheel and a hand-made nappa leather and suede interior.

For more details online, go to www.rdr.link/BJ063

BATTERY DUMPER TCP has become the main UK dealer for the Zallys Battery Dumper. The dumper is suitable for loads up to 500kg and can handle the most demanding of jobs. This compact battery dumper is easy to operate and manoeuvre with accelerator controls for forward motion up to 5.5kph and reverse up to 4kph. It also offers a semi-automatic tilting skip functionality.

For more details online, go to www.rdr.link/BJ064

GENERAL BUILDING

MORE INFO Just type in www.rdr.link/ followed by the unique code shown to get str aight to more info.

VIDEO DOORBELL

FENCEPOST The galvanised steel fence post system, Fencemate DuraPost from Birkdale, provides a durable, lightweight and wind-resistant alternative to wooden or concrete fence posts. Made of cold-rolled galvanised steel, the system is designed to withstand wind speeds of up to 70 miles per hour. While installing concrete fenceposts can often be a two-person job, due to their weight, these posts are up to 80 per cent lighter than concrete.

For more details online, go to www.rdr.link/BJ065

INTERIOR PAINT Now available in over 14,000 colours, Dulux Trade Diamond Satinwood is a waterborne paint made for use on woodwork and trims.

The paint aims to deliver professional results through its improved flow and high-quality finish. The woodwork paint is scuff, scrub and stain resistant – offering long-lasting protection against stains, grease marks and day-to-day wear and tear.

For more details online, go to www.rdr.link/BJ066

The latest tech development in home security that builders can benefit from is the ERA DoorCam Smart Home WiFi Video Doorbell. Using a Smartphone app, the system allows householders to view callers and talk to them in real time, whether they’re home or not. With ease of operation in mind, once the hardware is wired in, the householder can simply plug in the WiFi chime which comes as standard, connecting up to four more chimes in the home.

For more details online, go to www.rdr.link/BJ067

FLAT ROOF WINDOWS Dakea has expanded its range of roof windows and skylights with the addition of both fixed and opening windows for flat roofs. The simple to install windows feature a durable aluminium exterior, toughened external pane and laminated interior panes. The new windows also deliver increased light transmittance levels, energy efficiency and sound absorption to create a comfortable indoor environment.

For more details online, go to www.rdr.link/BJ068

MATT PAINT Designed to eliminate visible application marks highlighted by lighting, as well as the extra time taken to resolve them, Johnstone’s Trade has developed Perfect Matt with Smooth Layer technology. This technology provides a balanced ratio of binding agent, additives and pigments, designed to give a flat matt finish with ease. The paint can also be used to re-touch and spot repair, ensuring any spoiled areas dry to blend in flawlessly with the surrounding surface.

For more details online, go to www.rdr.link/BJ069

DOORSETS RANGE XL Joinery has recently launched its expanded range of in-house manufactured doorsets. The new range comprises quality controlled and engineered doors and frames, accurately sized and morticed for hardware.

Doorsets offer a range of safer options, meaning that there is less risk of accidents to site installers. The frames are knocked down and have machined joints, enabling ease of fit and simple assembly.

For more details online, go to www.rdr.link/BJ070

TOOLS & EQUIPMENT LEATHER WORK GEAR The Hultafors Group has acquired American leather work gear brand Custom LeatherCraft, or CLC. As a designer, developer and marketer of ‘work gear’ for professional tradesmen and women, its product range includes softside tool carriers, nail bags, tool pouches plus personal protective equipment. The company aims to combine design and functionality as well as value for money.

For more details online, go to www.rdr.link/BJ071

SANDERS Bosch expands its range with two new GET series direct driven random orbit sanders. The tools are equipped with a 550 or 750 watts motor meaning they can achieve a fast removal rate with a high surface quality. With just one click, tradespeople can change from fine sanding to coarse sanding or polishing with the direct driven function, achieving three times faster material removal. The design of the tools includes an ergonomically shaped palm rest with soft grip and narrow handle.

For more details online, go to www.rdr.link/BJ072

WATERPROOF CLOTHING For those who require protection from the rain for long periods on site, Snickers Workwear has launched a range of Gore-Tex jackets and trousers. These technical, durable garments feature a membrane with over 1.4 billion pores per square cm.

They’re 100 per cent waterproof to keep you dry, windproof to keep you warm, and breathable to keep you comfortable all day long.

For more details online, go to www.rdr.link/BJ073

TOOL STORAGE Tool and equipment storage specialist Armorgard is introducing four specially designed heavy duty, high security 1.2m and 1.5m site boxes and chests to combat rising theft from building sites.

The TuffBank TB2 and TB3 site boxes and TBC4 and TBC5 site chests have anti-jemmy features and additional internal reinforcements that the manufacturer claims make locks almost impenetrable.

For more details online, go to www.rdr.link/BJ074

CORDLESS DISC GRINDER Equipped with a high-power Multi Volt battery and a brushless motor, HiKOKI Power Tools’ G3623DA cordless disc grinder claims to deliver the power of a corded tool and more. Showing the power that the batteries deliver, when grinding steel, the new grinder beats the equivalent corded model, with a thrust of 29N, using a ø230mm depressed centre wheel. The model also features a brake system that shortens the time between turning off the tool and the motor stopping.

For more details online, go to www.rdr.link/BJ075

POLE SANDER A first for Makita, its new longreach 18V LXT Brushless Drywall Sander offers tradespeople the ability to sand in difficult to reach areas. The sander is supported by the company’s LXT battery technology. When compared to traditional batteries, LXT batteries support anytime charge, long-time storage and are shock absorbent.

The 18V brushless motor can produce a load speed of between 1,000 – 1,800 rpm. Tradespeople can control speed on the machine via its variable speed control dial.

For more details online, go to www.rdr.link/BJ076

Save time, make money all year

with the reliable, easy to use and clean, pneumatically powered,

vibration free Pnu-Point pointing tool.

sales@pnupoint.co.uk

I

76 NOVEMBER 2019 PROFESSIONAL BUILDER

THE ‘REAL DEAL’!

The annual Real Deals for You promotion returns and Professional Builder’s Tibby Singh Chodha is showcasing a selection of the tools available.

■ SCAN FLEXI SPECTACLES I have dry eyes myself, making me at an increased risk of corneal abrasion, so you won’t find me without my glasses. I’ve been hunting for some that are durable, but able to make you look cool on site, and think I can see the light at the end of my search with these NEW SCAN Flexi Spectacles.

The design was eye candy, the weight was very light and the flexibility is the best I’ve experienced. It has all the other features of UV resistance, scratch & impact resistance and an anti-fog coating.

A single wraparound lens provides maximum peripheral vision and side protection. The nose bridge aids comfort, and they’re available in Clear, Amber, Blue, Smoke and Mirror.

For more details online, go to www.rdr.link/BJ077

■ FLEX ANGLE GRINDER I’ve been regularly using an angle grinder recently, so I was quiet excited to get my hands on the FLEX 800 Watt Angle Grinder. It was pleasure to work with and has all the features you’d expect, such as a spindle lock, lockable side switch and a side handle grip.

What grabbed my attention was its extensive dust protection for the motor and gears. This is a great idea as I’ve had many grinders stop working due to dust.

It has an impressive 4m cable, providing you flexibility to move around, and giving you a cordless feel without having to change any batteries with extended use. Its cable isn’t the only thing that’s long about it because, thanks to optimised cooling and revised carbon geometry, it also has a longer service life.

For more details online, go to www.rdr.link/BJ078

I

78 NOVEMBER 2019 PROFESSIONAL BUILDER

■ KOMELON POWER BLADE II HI-VIZ TAPE 5M/16FT The one tool all trades use every day is a tape measure. My tape measure has literally done twice as much work as I have, as I’m a strong believer in measure twice and cut once. The 5m measuring tape seems to be the most common size I use and this KOMELON example feels extremely robust for a 5m tape.

It has a double sided blade with a twist; there’s the usual metric and imperial on both sides, but the top face has a horizontal scale, with a vertical scale on the underside. This two-faced tape keeps everyone happy by making it easier to measure in any direction. It also has a high visibility coating, so won’t be taking the blame for any of your mistakes.

It doesn’t stop there, because there’s a multi-directional end hook that allows you to single-handedly measure from above, below and the side. The final attractive feature of the KOMELON is the embedded magnet, which makes it easier when measuring from metallic surfaces.

For more details online, go to www.rdr.link/BJ079

■ FAITHFULL PRESTIGE RANGE COMBINATION SQUARE 300MM/12IN As a carpenter/joiner I’ve seen many combination squares in my time so I was looking forward to squaring up to the Faithfull 300mm Combination Square in the Prestige range. It has all the standard features, such as horizontal/vertical level, and obviously allows you to mark out 45˚, 90˚ and 135˚ angles. It’s also manufactured from aluminium, which makes it light in weight.

However, what stood out for me is its black anodised finish, which offers enhanced corrosion protection and its white laser engraved scale, giving you better visibility and accuracy. It’s literally in black and white – and leaves no excuse to set it wrong.

For more details online, go to www.rdr.link/BJ080

■ LIGHTHOUSE LED SLIMLINE TORCH ■ FORGEFIX SPECTRE SCREW SET There are some that might think a screw is a screw, but my approach is that you should be able to insert it, and take it back out, as many times as possible without it rounding off. I’ve used some in the past where, once they were in, it was a struggle to get them out again – that’s what nails are for right?

These Spectre screws have a long list of features, which is a sign of a good quality screw. From start to finish it has a quick start functionality, sawtooth which prevents splitting and reamer design to prevent jacking. They are also synthetically lubricated, which helps fly into the material, and are even surface hardened. A rugged organiser case, with metal handle and catches, is also available.

For more details online, go to www.rdr.link/BJ081

At some point we’re all expected to access those dark and dingy places, such as lofts and basements. These days, many people turn to their trusty mobile phones and use the light on that.

However, I’m always reluctant to do this as it rapidly drains the battery, and we often need our phones on site for communication with clients and suppliers alike. It also puts your phone at risk of being dropped and cracked, all of which means a torch is the preferred option.

Lighthouse’s LED Mini Slimline Torch is so slim that you’d forget you had it in your pocket, so you can keep it on you at all times without it causing a nuisance. I was impressed to see how bright 200 lumens actually is. Other bright features include a dimmable function and an option to switch from a white light to a solid red or a strobe red. It’s recharged with a USB lead, which is included. Finally, another reason this torch will be sticking with me is a strong magnetic base for metal surfaces!

For more details online, go to www.rdr.link/BJ082

I

PROFESSIONAL BUILDER NOVEMBER 2019 79

80 NOVEMBER 2019 PROFESSIONAL BUILDER

No.5 in the series TOOLS & EQUIPMENT

Quad a winner!

Multi-task with a single drill courtesy of the latest Festool technology

There is always that one job. The one we look at and think that’ll be an easy, quick one to finish off the day. The job that whispers promises about getting home (or to the pub) early. And then you begin and before you know it all your tools are out of your van. There is drilling into masonry to do, a screw to go into a tight awkward angled corner, and that’s just for starters.

The “quick job” curse strikes again.

Luckily, power tools are constantly being developed and improved, with the aim to make day-to-day tasks easier for tradespeople. From designs ensuring perfect tool ergonomics to simple angle attachments that make screwdriving into narrow corners easy, there are a variety of tool features to consider that can help make your day run that bit smoother.

A multi-talented tool, like Festool’s cordless QUADRIVE PDC 18/4 drill, that works as both a screwdriver or drill is a simple solution. It allows you to be ready to switch between drilling and screwdriving quickly and easily – saving the need to go between different tools or carting around numerous products.

Obviously, a dual tool is only useful if you can change between the different functions easily. Tool developments have

again produced solutions to make this quick and simple. The FastFix interface on the Festool PDC 18/4, enables you to go from screwdriver to drill without the need for additional tools. And the CENTROTEC quick-change system on Festool drills, is both a chuck and bit holder in one.

However, it is 50 per cent smaller and 80 per cent lighter than a standard drill chuck. So, not only do a variety of options become available in just one click, but it

keeps drills compact and light – ideal for overhead work.

It is not only the exterior features of your power tool that contribute to an easier day. An EC-TEC brushless motor runs without carbon brushes and is therefore maintenance-free and extremely reliable. This ensures a long service life and maximum performance of the tool in all conditions.

Whatever challenges the day brings you, whether it is a “quick” job that turns into a monster one, or having to get a screw into a tight corner, there are a range of power tools that can help make your life easier. By having power tools with features that work for you, with features such as quick-change systems, technology that ensures a longer service life or innovative attachments – tasks become easier.

From now until 30th November you can get a free battery when you purchase a Festool promotional drill or screwdriver.

To find out more, including the eligible products, please visit www.rdr.link/BJ083

I

PROFESSIONAL BUILDER OCTOBER 2019 81

No.3 in the series TOOLS & EQUIPMENT

ON THE CHARGE For the most part, contractors prefer working with cordless tools but are put off by a number of concerns. In the past, cordless tools have struggled to compete with corded tools in terms of performance. Historically, cordless tools have been limited to a single 18V battery. Running off a singular battery limits the power and performance of tools, which can adversely affect efficiency on site. In turn, this can lead to a problematic scenario for contractors of being stuck on site with a tool that’s not powerful enough for the job.

Similarly, contractors have been concerned about the need to routinely charge cordless tools. With a standard single 18V battery, cordless tools don’t always have the capacity to complete major tasks without the need to recharge.

This can delay work progress and have serious knock-on effects, especially if a project is working to a precise schedule.

Still the alternative, corded tools, have their own limitations too. As well as being heavier, corded tools only offer users limited movement, which can make work more difficult to complete.

On account of these battery or power concerns, many contractors will only use cordless models on general jobs and stick to corded models on bigger tasks, where more power is needed.

Fortunately, there are new ranges of Makita cordless machines, which make use of twin 18V technology to give 36V power, without leaving the existing 18V platform.

Twin battery cordless machines are still as versatile and user-friendly as ever before, but deliver the greater power and longer runtimes required for high drain applications such as timber cutting and breaking,

In the third instalment of the Makita Tech Talk series, Tony Coleman, Technical Manager at Makita explains how the new generation of twin 18V machines are delivering more power and longer runtimes than ever before.

or larger diameter drilling in concrete.

Adding a second 18V battery to a cordless machine has a number of benefits. For one, a twin 18V machine can support a more powerful 36V motor, whilst still using an existing but very popular 18V battery platform. Different battery capacities can be used on the same machine with any charge level without a problem. For example, a 4Ah battery and a 3Ah battery together can create 36 volts of power. When using two batteries with the same capacity but one with 100 per cent charge and the other 80 per cent, the Makita machine will stop when the battery with the lesser capacity is empty.

With double the power of standard cordless models, the

new machines are making it possible for tradespeople to use cordless tools on every aspect of a build. As a result, contractors can benefit from the usability advantages of cordless tools, whilst not suffering from performance concerns. As cordless tools are generally lighter than corded versions, contractors can use them for longer without suffering from fatigue. What’s more, unrestrained by a power cord, cordless tools can be used to reach areas that may be inaccessible to corded versions and reduce the risks of trip hazards on site.

Makita’s twin 18V models can be used with the full range of LXT 18V batteries, available in 3.0Ah, 4.0Ah, 5.0Ah or 6.0Ah capacities. The technology enables anytime charge, as well as long-time storage. Additionally, the batteries are housed in a heavy-duty pack, which makes them shock absorbent. Depending on the size of the battery, charge times range between 22-55 minutes – which represents an industry-best. The company also produces a Twin Port Charger, which allows contractors to charge two 18V batteries simultaneously.

Power tool suppliers are increasingly responding to contractor demands for cordless tools that deliver strong performance and extended battery life.

Examples like Makita’s twin 18V range are ideal for those who want more power, whilst still retaining excellent usability and versatility. These models are helping to drive a new era of cordless tool use and are opening up a world of new possibilities for contractors around the country.

To find out more about Makita and its twin 18V cordless range visit www.rdr.link/BJ084

I

82 NOVEMBER 2019 PROFESSIONAL BUILDER

No.3 in the Series INSULATION

IN THE FRAME Why are more people building using timber frame?

Timber frame offers a number of advantages when compared to traditional brick and block construction. It enables faster build times, and so can reduce disruption. It also ensures quality, whatever type of build you choose; onsite ‘stick-built’, semi-finished or completely closed panel – the quality assurances derive from the fact that key elements are built in controlled factory conditions. Then there is the design flexibility when it comes to finishes, with numerous cladding options offering design-driven aesthetics, yet keeping wall thicknesses to a minimum. When these factors are combined with enhanced sustainability credentials, and the potential for improved thermal performance, timber frame is clearly a very compelling option.

Professional Builder talks to James Mills, Rockwool Product Manager about the ins and outs of insulating for timber frame extensions and new builds.

Q

In terms of insulation, what does the builder need to bear in mind when working on a timber frame construction?

I would narrow it down to three things – sound, fire safety and thermal performance.

If these can be kept front of mind from the beginning, you won’t go far wrong.

Clearly, timber frame structures are a different beast to traditional construction materials and these differences need to be understood.

Firstly, although a timber frame structure is strong and very durable, it is also light weight in comparison to bricks and blocks. A building with a lighter mass is more susceptible to noise transfer as sound will travel more easily than through denser materials. That matters in built-up or urban areas, as well as in busy and noisy family homes!

Another important consideration is fire resistance: It is vital to use Euroclass A1 fire-resistant insulation as this helps protect the building from the threat of fire, both during the more vulnerable construction phase, when the timber frame

Q

I

is open and exposed, as well as once the building is occupied and complete.

Thermal performance is also significant.

Because timber frame structures can often accommodate more insulation than usual, this can help save energy, keeping warmth in to help maximise home comfort and keep bills low.

Where should builders look for relevant guidance or regulations on timber frame structures?

The Structural Timber Association (STA) is a great resource for builders working in timber framed construction.

The STA offers free technical guidance on how to meet or even exceed all the current legislation and regulatory requirements for structural timber

Q

84 NOVEMBER 2019 PROFESSIONAL BUILDER

construction projects.

Rockwool are an active member and has carried out extensive testing in collaboration with the STA. The STA has developed their own classification system regarding insulation and fire performance to assess the risk of fire spread between timber framed buildings during the construction phase.

The organisation carried out a series of controlled fire tests which led to them issuing guidance regarding safe separating distances between neighbouring timberframed buildings. One important finding was that stone wool was the only insulation type to achieve the highest classification of FI build type 3.

This classification states that not only will stone wool not burn in a fire, but it will

also keep its volume, rather than melt or shrink. This helps to maintain a fire barrier to protect the structure for a longer period of time.

Of course, another important consideration regarding fire safety is smoke, as it is often toxic smoke that kills before the fire itself. In fact, statistics show that smoke causes more than half of building fire casualties in the UK. It is reassuring to know that stone wool insulation does not significantly contribute to the emission of toxic smoke.

How does Thermal Timber Frame Slab differ from other types of insulation currently available?

Unlike other insulation products on the market, Thermal Timber Frame Slab – as the name implies – is designed specifically for installation into timber frame applications.

It is made using a new high-speed spinning production process. This process

Q

meet both extensions and new build regulations. With that in mind we have made the Thermal Timber Frame Slab available in both 90mm and 140mm thicknesses.

What else should I know about Timber Frame Slab?

A higher density product also means excellent noise reduction and sound absorption benefits. The higher density also helps to provide a perfect fit, preventing slumping and sagging and any performance sapping gaps or cracks that might appear, even as timber studs dry out over time.

Stone wool is also a highly sustainable material, which is an ever more important factor for homeowners in today’s environmental climate. As Timber Frame Slab is produced from abundant, naturally occurring volcanic rock, it is 100 per cent sustainable and can be recycled again and again.

Q

results in thinner fibres, which create more air pockets and, as a result, deliver an improved thermal performance, with a low Lambda value of 0.034 W/mK. This makes it possible to achieve a thermally efficient timber frame building and one that keeps the homeowner warm in winter but cool in summer.

Why is the Thermal Timber Frame Slab offered in two thicknesses?

It is possible to work with different sized stud depths depending on what you want to achieve thermally, with timber frame offering numerous construction options to

Q

To access product information, resources, a U value calculator and information on regulatory guidance take a look at www.rdr.link/BJ085

I

PROFESSIONAL BUILDER NOVEMBER 2019 85

CLADDING

Clad

tidings David Cooke, Specification Sales Manager at Cupa Pizarras, takes us through the company’s rainscreen cladding system, CUPACLAD 201 Vanguard, and how easy it is to install.

C

UPACLAD 201 Vanguard marries large format slates with stainless steel clips, creating a clean, modern look. It is a patented system designed to meet the highest technical requirements of the construction industry. The slates are extracted and selected from the best Spanish quarries – and the cladding really stands out, due to the clips being slightly visible once the system is installed, beautifully contrasting with the natural slate

The slates supplied for the invisible fixing systems are always pre-holed at the required position, making its installation quicker and problem free. The slate manufacturer has designed the 201 Vanguard with horizontal metal rails with small holes, to mark the exact position where the clips should be placed. This avoids the necessity of drawing vertical guidelines and individual fixings for the clips.

HOW TO INSTALL CUPA PIZARRAS 201 VANGUARD SERIES SLATES:

Step 1: The metal brackets are installed in alternate courses on each side of the wall. It is required to use both fixed point metal brackets on the upper end of the wall and brackets with a sliding point to allow for the profile movement.

Step 2: Choose the most suitable insulation material based on the project requirements. Fixing the insulation material in accordance with the manufacturer’s recommendations.

Step 3: Fix the vertical profiles to the metal wall brackets allowing at least 2cm for an air space. The vertical profiles must be perfectly level before fitting the rest of the system on.

Step 4: Fix the horizontal profiles with the vertical ones at each intersection. The gap between horizontal profiles when fitting a 60x30 slate must be 260mm. The horizontal profiles must be perfectly level as their position will dictate the final outlook of the slates on the wall.

I

86 NOVEMBER 2019 PROFESSIONAL BUILDER

Step 5: Fix a ventilated flashing at the first course of the cladding and the metal flashings on “singular� points (edges, window frames, etc.)

Step 6: The clips are fitted to the holes on the horizontal profiles. Each slate must be supported by two clips on the lower edge while fitted with another two on the top. This allows for each slate to be tightly secured to the horizontal profile.

For further information on CUPACLAD from Cupa Pizarras visit www.rdr.link/BJ086

Step 7: At the top of the cladding when joining the gutters, it is necessary to use the 201-Vanguard top profile, as each slate must be fitted with two self-drilling screws or rivets.

ROOFING

Going through the roof Professional Builder continues its celebration of the rich heritage behind BMI. This month the Swinging Sixties sees the company gain momentum.

Late 2019 marks the centenary of concrete tile manufacture in the UK through BMI UK & Ireland’s Redland brand. The build-up to this remarkable milestone of 100 years of concrete tile manufacture is being marked by the company acknowledging not only its rich heritage and experience reaching back 180 years, but also the achievements, innovations and philosophy that has led it to be the largest manufacturer of flat and pitched roofing and waterproofing solutions in the UK and Europe.

When the Redhill Tile Company was founded in Surrey in 1919, it was the start of a journey that would end in the concrete tile maker being part of a business that now spans the entire spectrum of roofing solutions: from concrete, clay and metal tiles and reconstituted slate through to reinforced bitumen membranes, hot melt, single-ply and liquid waterproofing systems.

The modern story of BMI UK & Ireland starts in the ‘Swinging Sixties’. In the first three years of the 1960s, Redland enjoyed tremendous growth as it opened or acquired seven new factories – including the Grovebury Tile Works in Leighton Buzzard, replaced by the nearby Vandyke Works, and Shawell, near Lutterworth. The Grovebury site continued until 1979, when a modern, fully-automated factory was built just under two miles away.

Shawell – which makes the highly popular plain tile appearance Duo-Plain concrete tile – recently benefited from a multimillion-pound investment in a new DuoPlain manufacturing line that will help secure supply of these important products into a market that is currently experiencing great demand and extensive lead times.

In 1963, Redland launched Stonewold II. Used on thousands of roofs across the country, Stonewold II is the original flat-profile concrete slate with interlocking edges.

Imperially-sized and suited to larger roofs with pitches as low as 17.5˚, it is ideal for achieving a cost-effective slated roof effect. Impressively, the original tile line is still in use.

Always focussed on innovation and pioneering

technologies, 1965 and 1966 marked two major achievements for the company. First, in Horsham, Sussex, in 1965, Redland built the construction industry’s first wind tunnel, dedicated to the testing of roof systems in the harshest weather conditions. The first wind tunnel’s power came from a mighty Merlin engine, the WW2 legend remaining in place until the tunnel was rebuilt at a cost of £2,000,000 in 1990.

Second, in 1966, Redland invented the concept of dry fix roofing, with its first patent for a dry verge system. Dry fix has now become a norm, with the latest company development being BMI’s introduction of two new dry verges to meet the requirements of BS 8612: Dry-fixed ridge, hip and verge systems for slating and tiling – a new British Standard published in 2018 to ensure that dry fixed products are adequately designed and installed to be fit for purpose.

Such innovations in the 1960s required a new level of technical understanding, and towards the end of the decade Redland produced its first technical manual – the famous Redland Red Book, the piece of go-to literature resource for the roofing sector for decades.

Finally, the decade closed with Redland purchasing a large holding in an Australian company, Monier, a name which – like 1950s investment in Braas – was destined to dominate the future direction of the company.

With a heritage in concrete tile manufacture going back a century, not to mention 180 years in clay, BMI – formed in 2017 following the coming together of Icopal and Monier Redland – will be celebrating the advent of the tiles in the UK later this year. In the run-up to the celebrations, the company will continue to share more about its superb pedigree, major milestones – and enviable history of pioneering and innovating new materials and methods.

BMI UK & Ireland is part of BMI Group, which has more than 11,000 employees worldwide in 40 countries and runs over 150 production facilities. With the group having made its home in central London, BMI UK & Ireland is settled in its head office premises in Milton Keynes.

For more details of BMI UK & Ireland’s heritage and flat and pitched roofing solutions, visit www.rdr.link/BJ087

I

PROFESSIONAL BUILDER NOVEMBER 2019 89

TECHNICAL TEAM TIPS – NO 9 ROOFING

Fashionably slate Daniel Redfern from Marley explains how you can get a slate look without the cost

O

ver the past few years both the new build and refurb sector have seen a growing design trend towards pitched roofs with a sleek, slate appearance. This has led to a huge increase in demand for cost effective, time-saving slate alternatives that replicate the look of natural slate for a much lower price.

In particular, thin leading-edge interlocking concrete slates, like our Edgemere range, have experienced a huge growth in sales. So, why are they so popular and how can they help you achieve a quicker and more cost-effective slate roof?

appearance of a small format slate and Riven, which has a textured surface to give a closer match to a natural slate. We have also recently launched a new Anthracite colour for a darker slate aesthetic.

easy to install, require no specialist slating skills and can be fitted by any roofer.

They do need to be fixed to BS 5534 but, by using a SoloFix one-piece clip and nail, you can reduce clipping time by around 30 per cent.

Aesthetics

Lower material and labour costs

While inevitably there will be some heritage projects where only a natural slate will be permitted by planning, advances in manufacturing mean that some thin leading-edge concrete slates are able to replicate the look of slate very effectively. For example, our Edgemere slates are 40 per cent thinner than a standard concrete roof tile and resemble natural slate in their depth and tone. They have been used on thousands of new homes across the country where housebuilders want to achieve a designer slate roof without the price tag.

In addition to the standard Edgemere, there is also Duo, which has a mock bond down the centre of the tile to create the

If you take material costs alone, natural slate can cost between £70 and £100 per m2, whereas a concrete slate like Edgemere can be as little as a third to half the price. This is partly because of the high coverage rates of Edgemere, with just 9.7 tiles per m2, compared to around 13.4 per m2 for fibre cement slates and as high as 18 per m2 for natural slate. This also has an impact on labour time and cost.

The variation of thickness of natural slates means they require extensive sorting on site. The thickest and biggest slates are used for lower courses, graduating to smaller and thinner slates towards the apex. This requires time, skill and experience. However, Edgemere slates are uniform in size, so they can be used straight from the pallet with no sorting time and without years of roofing expertise. This consistency also makes them much easier to install, as the slates simply interlock together.

Consistency

I

Ease of installation Natural slates are double lapped and need to be installed by highly skilled roofers with many years of experience.

However, as a single lap interlocking tile, our Edgemere slates are very quick and

90 NOVEMBER 2019 PROFESSIONAL BUILDER

Lower minimum pitch In low pitch projects, natural slate can be limited by geography because driving rain has to be considered. This means that

pitches of 20 degrees can be achieved with natural slate, but it requires increased head laps and therefore more slates, with the consequences of additional weight. This could lead to higher costs for materials and additional costs to strengthen timber structures because of extra weight loading.

The fact that Edgemere can be used down to a low minimum pitch of 17.5 degrees means it has less limitations than

natural slate and it has the versatility to be used on a wide range of projects in any geographical area (when fixed according to BS 5534). It can also be installed using standardised and uniform supports, which means that its weight loading is more predictable.

Edgemere interlocking concrete slates offer the positives of natural slate with none of the negatives – like being in your favourite beer garden without the wasps!

All of the slates are also available to purchase as part of a complete Marley roof system, including battens, underlay, fixings and accessories, all backed up by a 15-year guarantee.

For more information on the Marley Edgemere slates visit www.rdr.link/BJ088

v ch id er

Da a n Con

Daniel An

Ki A l a n rk p a t ri c k

drew

unt Key Acco Manager

ical Techn er g Mana

Mark e Mana ting ger

n Jilliao Tint

s ces Pro eer in Eng

COME ON BOARD! Panel thickness

씰 Panel thickness selection is dependent on joist span 씰 On joists up to 450mm centres use 18mm board. 씰 On joists up to 600mm centres use 22mm board.

NO. 6

THE BOARD

(PART ONE) Norbord’s CaberBoard range comprises advanced flooring systems for all installations – new build, replacement, domestic and commercial. Here, the experts at Norbord advise on installation for maximum performance. four fixings to each short edge joint, two about 25mm from each end and two equidistant in between. All joints must be tightly butted. Length of fixings used should be 2.5 times the thickness of the board. Four equidistant fixings should be used on panel ends and three at intermediate joists. T&G panels are laid with long edges across the joists.

Square Edged (SE) panels

Tongued & Grooved panels

씰 SE panels are laid with long edges inline with the joists

씰 T&G panels are laid with long edges across the joists Tongued & Grooved panels should be laid in a staggered pattern with long edges across the joists and short edges falling on the centre of joists. Support between joists is not necessary. Should the short edges overhang, then the overhang must be supported by a noggin.

Gluing T&G joints is recommended. It improves joint strength and accommodates a degree of joist variation.

All joints should be glued with CaberFix adhesive (J&J, D3 or D4, dependent on panel type), otherwise, joist movement or variation may lead to movement and ‘creaks’. Boards can be fixed by nailing or screwing. If nailing, annular ring shank nails should be used for fastening all edges to the joists.

If screw fixing, use a suitable pilot hole followed by Posidriv No. 8 particleboard screws, or equivalent. Fix the boards with

SE panels should be laid with the long edges falling on the joist centres and with the short edges supported by 38mm wide noggins with their ends secured to joists. Nail the boards to all supports 200-300mm apart with annular ring shank nails round the edges of the board and at 300mm centres on intermediate joists. The nails used should be 2.5 times the thickness of the board. All joints must be tightly butted.

Perimeter expansion gap 씰 10mm minimum expansion gap should be applied to the perimeter CaberFloor P5, when laid in a new building, will tend to absorb moisture and

expand in common with other woodbased materials. It is important to leave an expansion gap of 2mm per metre run of board between the edge of the floor and the perimeter wall or any solid abutment (minimum gap 10mm). For larger areas, it is necessary to incorporate intermediate expansion gaps to provide the necessary allowance for possible movements, particularly in corridor applications.

Attention must be paid to maintaining expansion gaps at all times during construction.

Additional movement gaps 씰 In large areas or long runs additional expansion gaps should be included It is well documented and strongly recommended that additional movement gaps are incorporated in large areas or long runs e.g. corridors. BS 8201:2011 Code of practice for installation of flooring of wood and wood-based panels recommends an expansion provision of 2mm per metre run plus 1mm for every metre above 12m of the width and breadth of the floor. A simple movement provision can be made according to the diagram above and also proprietary systems are available to suit a wide range of applications.

Next month part two.

For more information on Norbord online, go to www.rdr.link/BJ089

I

92 NOVEMBER 2019 PROFESSIONAL BUILDER

No.17

T O P T R UM P S BE A WONDER WALL In the latest of its building defects Top Trumps series, Safeguard Europe looks at heat loss through masonry walls, and simple steps that can be taken to improve their energy efficiency. studies have shown that the biggest source of heat loss in buildings is through the walls – as much as 35 per cent. The problem most effects properties with solid-wall construction or on walls that are excessively damp.

Stay dry to stay warm

An important consideration for any property owner these days is how to save energy. Increasing energy prices, concern over global warming and government energy efficiency targets are making reductions in energy bills and CO2 emissions a major concern for both owners and tenants in buildings of all sizes.

One of the largest sources of energy consumption in a building is the heating system. If a building is not well insulated, it will lose heat quickly and it will take more energy to heat sufficiently. This is not only wasteful and environmentally damaging but also costs the energy bill payer more money.

Heat loss sources People often turn to roof insulation or double-glazing when attempting to reduce heat loss in buildings. Whilst these methods will reduce heat loss,

Dry masonry has a higher thermal resistance than wet masonry. A wet fletton brick, for example, loses heat at approximately twice the rate of a dry fletton brick. The practical meaning of this is that a property with damp external walls will require more energy to heat than a dry property.

If Stormdry Masonry Protection Cream is applied to a damp-prone brick, stone or masonry wall, it will resist rain penetration and allow it to dry out. Heat loss through the wall in wet weather conditions will then be reduced and less energy will be required to heat the property.

Bigger energy performance improvements For even bigger potential energy savings, Stormdry Masonry Protection Cream combines with the Stormdry EPBoard internal insulation system to provide landlords and other property owners with a cost-effective way to improve the thermal performance of solid-walled properties.

Stormdry EP-Board is a 13 mm thick hybrid aerogel and magnesium oxide plasterboard that is directly adhered to walls with a specially formulated adhesive. When Stormdry Masonry Protection Cream and Stormdry EP-Board are applied to a previously damp solid wall, they can reduce heat loss by up to 60 per cent.

Insulation protection Stormdry Masonry Protection Cream is also ideal for protecting other types of insulation. Cavity wall insulation can be problematic when installed on particular porous walls or walls in areas with high levels of wind-driven rainfall. If moisture is able to penetrate the outer leaf of the cavity wall, it can saturate the insulation material causing a loss of insulation performance and possibly introducing interior damp problems.

Y OU R C H A N C E T O WI N !

Please contact Safeguard for waterproofing design specialist contacts, basement waterproofing technical queries or basement waterproofing training information. Go to www.rdr.link/BJ090. Safeguard is also offering a pack of its new Building Defect cards to the first 50 readers to visit www.rdr.link/BJ091

I

PROFESSIONAL BUILDER NOVEMBER 2019 93

ADE’S TOP WINDOW & DOOR TIPS

! ’ L L A ‘C S ’ N A I R AD DON’T BE AFRAID OF THE DARK!

No. 10

Adrian Barraclough runs Quickslide, one of Britain’s leading window & door manufacturers.

Winter brings many challenges, not least security, but Quickslide is on hand to advise builders on how they can help their customers secure their properties.

The nights have drawn in and, whilst British winters are seldom that severe (probably the kiss of death!) the days are shorter and nights seem interminable. And that is when we all most seek the comfort and security of our homes.

Security is at the forefront of homeowners’ minds when they are upgrading their windows and doors, whether as part of an extension or simply because they are replacing tired frames, and never more so during the winter months. And there are opportunities for builders that have familiarised themselves with the latest security standards, by offering advice and gaining the trust of their customers.

Research confirms that burglaries increase by a third when the clocks go back, with claims analysis carried out

by Co-op Insurance showing that break-ins increase by an average of 34 per cent during the darker months.

Furthermore, more than 435,000 burglaries annually leave families devastated, says research carried out by alarms company Verisure, with children especially affected. In fact, says the research, 17 per cent of victims actually move home following the burglary of their homes.

I

94 NOVEMBER 2019 PROFESSIONAL BUILDER

few pounds, but offering the benefit of You can become a real hero when knowing their home is as secure as it discussing window and door options can be will be priceless. Urge your with your customers by advising them customers to spend the extra and, as on the importance of installing the very a rule of thumb, go for upgrades best locks, with the most secure defined by SBD. There are, of course, options available from reputable window and door locks that are highly window and door manufacturers that secure and not SBD approved but will secure homes from all but the most unless you want to actually compare determined attackers. performance reports on dozens of You can begin by understanding products, this is the easy route. what all of the various standards and Every type of window and door marques mean, such as PAS 24, Doc Q and Secured by Design (SBD). Easily may be so equipped: Even products that you think may be at the high end the best advice can be found in the of vulnerability, such as bi-folding downloadable brochure produced doors, are constantly evolving and SBD, which is a police initiative manufacturers such as ourselves are designed to improve the security of now able to offer a door that meets buildings. Spending a few minutes reading the advice given on the SBD the security requirements of PAS 24 – including laminated glass that doesn’t website will allow you to pass great advice on to your customers on how shatter when force is applied.

From your point of view the best to choose the most secure options advice, as always, is buy your windows for the windows and doors you will and all types of doors from a reputable be supplying for them: manufacturer and ask them for their www.rdr.link/BJ092 guidance.

In broad terms the difference in cost between standard hardware For further information on Quickslide and the most secure will be just a online, go to www.rdr.link/BJ093

Digital digest

At Professional Builder we have invested significantly in our digital offering over the past year, which has created some impressive results across our website and social media channels.

To discover more about us and keep up to date with the very latest tools, news and reviews please visit our website www.probuildermag.co.uk where you will also find links to our social media channels. Here you can sign up to our weekly email newsletter which delivers all the latest industry news straight to your inbox.

Here is a snapshot of what has been popular online with Professional Builder’s audience over the past month…

Professional BUILDING ■ FLOORING ■ PLUMBING ■ ROOFING ■ CARPENTRY ■ PAINTING AND DECORATING ■

ONLINE HITS Damp concrete floors – a problem that has driven more than a few builders to the brink in the past! No wonder then, that our solution to the problem was such a big hit on our website.

www.facebook.com/probuilderonline/ FACEBOOK FAVOURITES It looks like some of you have been looking to sell your van recently, perhaps in time to buy a nice new shiny one before Christmas? Well, before you treat yourself to that wellearned workhorse, have a read of Honest John’s top van selling tips!

There’s a lot to be said for going old school these days, but don’t take our word for it.

Let Traditional Oak Carpentry’s Rick Lewis’s article on our website explain why heritage work is so rewarding.

@PB_mag TOP TWEETS A day at the races was on the line in a recent competition we ran on Twitter, sponsored

by Vauxhall. Before you ask, the races in question were British Super Bikes. Much, much faster than horses.

We like to drop in every now and then and let you know where we’ve been and what we’re up to. Recently we were at the Ardex HQ sitting in on one of their training courses.

SEE IT SEARCH IT SHARE IT @PB_mag

@probuildermag

www.facebook.com/probuilderonline

Wwww.probuildermag.co.uk I

PROFESSIONAL BUILDER NOVEMBER 2019 95

GOOD HEALTH PRESCRIPTION ............

Patient Name............................ ..........

Date of Birth ..............................

Address ....................................

............

............

Date ..................

NO. 7 ............

PROSTATE PROBLEMS

IN A REGULAR COLUMN PRACTICING GP ALICE FITZGIBBON TACKLES SOME OF THE EVERYDAY HEALTH ISSUES WHICH MAY BE IMPACTING ON YOUR PERSONAL AND PROFESSIONAL LIVES. THIS MONTH, SHE’S FOCUSSING ON BOWEL CANCER.

THE PROSTATE

............

and its problems...

The prostate is a small gland only found in men. Its function is to produce a fluid like substance which is mixed with sperm from the testis, to produce semen. The prostate gland surrounds the urethra (the tube that carries urine from the bladder to outside the body). In young men, the prostate gland rarely causes any issues. In men over the age of 50, the prostate may enlarge from its regular size, which is like a walnut. The most common cause of prostate enlargement I see is a condition called Benign Prostatic Hyperplasia or BPH. This is a fancy term for a big prostate gland which can just simply happen with age and no other reason. Men present to the GP with symptoms from this because, as the prostate gets bigger, it can press on the urethra and cause problems with urination.

Some of the signs of an enlarged prostate include: ● Weak urine flow ● Finding it difficult to start or stop urinating ● Having to strain to pass urine ● A sensation that the bladder is not empty after urinating ● Urine continuing to dribble after urination has finished ● Having a need to pass urine frequently or with little warning ● Getting up to pass urine during the night

To find out more about the Prostate, visit www.rdr.link/BJ094

I

These symptoms can be very annoying to have, especially as they disturb sleep.

Worrying about going to the toilet can also affect people’s quality of life. Often when men come in with these symptoms, they are asked to fill out a simple questionnaire – this helps us see how bad the problem is and how much it is affecting them.

So, the symptoms that patients tell us about help to figure out what the problem might be. To confirm an enlarged prostate gland, it is important to examine it.

96 NOVEMBER 2019 PROFESSIONAL BUILDER

Examination of the prostate is performed via an examination of the back passage.

Where the gland sits, it can be felt easily from the rectum. Sometimes men worry about having the examination done, but it is very quick and should be painless. The prostate gland is felt to determine its size, as we mentioned before, it should be like a walnut, but also to ensure it feels smooth. If the gland feels uneven or ‘craggy’ it might be a sign that the gland might be enlarged for another reason, like prostate cancer (more on this next time).

So what can be done for an enlarged prostate gland? Often simple measures can help some of the symptoms – for example, controlling what and how much you drink before bedtime. Taking too much caffeine or alcohol before bed may make you more likely to need to get up to urinate overnight. Tablet forms of medication can also be used, which work in two ways to help; either by relaxing the muscle of the prostate and bladder neck, which then allows urine to flow more easily, or by shrinking the prostate gland back down to relieve some pressure. Some people find medication can be very helpful and can improve symptoms significantly. If medication doesn’t work, sometimes a piece from the middle of the prostate gland can be removed surgically to help relieve pressure on the urethra.

It is important to talk to your GP about any changes you may have noticed in your pattern of going to the toilet. Sometimes, these changes happen slowly and it is not until you think about them that you might notice it isn’t quite right! As mentioned before, changes in your normal habits can sometimes indicate that all is not well. Next month, we will cover more about prostate cancer as a cause for prostate symptoms.

wise howell

TRADE MEDIA VITRA BROCHURES Packed with design inspiration and easy-to-follow technical information, VitrA’s three new brochures show the company’s range of sanitaryware, furniture, bathtubs, brassware and accessories in three distinct groups; the Designer Collection, the Signature Collection and the Bathroom Collection. The three brochures give an overview of what the manufacturer offers, including the classic ranges S50 and Nest. New products designed by the in-house design team, like Vitrus and Aquacare, are also shown.

To request a copy, go to www.rdr.link/BJ095

KEYMER SPECIFICATION GUIDE This guide is a must-have for any roofers involved in heritage work.

The makers of handmade roof tiles, Keymer, has been in the business since 1588. Accordingly, they have acquired a great deal of roofing knowledge, which they have put to good use here. The guide starts off by showing in great detail the various clay tiles the company produces, their history and their different uses.

The bulk of the book is made up of expertly drawn guides to traditional roofing methods, advising which tiles are needed for each job.

To request a copy, go to www.rdr.link/BJ096

TECO BUILDING PRODUCTS PRODUCT CATALOGUE Family-run Teco has been manufacturing builders’ metalwork in the UK for almost 40 years, and this catalogue outlines the extensive range of products they produce.

This includes joist hangers, truss clips and timber connectors. As well as jointing solutions for timber frames, the company produces fencing accessories, wallstarters and ties and beading and mesh for walls.

To request a copy, go to www.rdr.link/BJ097

GRONOGRASS INSTALL GUIDE Gronograss is an artificial lawn designed to take the hassle out of garden upkeep. This handy guide takes you through each step of the process, from digging out and disposing of your previous lawn to laying the type one stone needed to provide a foundation. The guide outlines the process needed to join two strips of the artificial grass together and provides a list of all the tools and materials you need to do a good job for your client.

To request a copy, go to www.rdr.link/BJ098

Parking can be a big problem for builders. And getting deliveries dropped in the street even more so.

Alright, we all know the rules. Skip licenses, building materials licences, yellow line waiver fees, suspended parking bays.

But life in our wonderful building game is not always that simple, is it? Sometimes you just need to get stuff delivered at short notice, and if the site doesn’t have a drive or a big front garden, then the only option might be to have it tipped or craned-off onto the road in front of the property.

It’s what happens next that is the problem. Do you waste a morning applying for licenses – that might be refused, or might require a pre-inspection of the road? Or do you just get on with the work, and hope to get the offending materials out of the way before a stray council inspector happens by?

Council inspectors are in short supply in these days of austerity. So one is only really likely to roll up if the council receives a complaint from a neighbour. Which is why I always go out of my way to make friends with the neighbours.

If I see them in person, I’ll introduce myself, give them my business card. Explain that we’ll be using the road for a few days, and apologise that the materials – and tradesmen’s vans – will be taking up a few parking spaces for a short time.

If there are houses where I don’t get to see the occupants, I’ll put a note through the door, giving the same information. It’s amazing how understanding most people are, as long as

you keep them informed.

Next up is to keep the site frontage tidy and officiallooking. If it’s a small job, and you haven’t got a hoarding, then you can still make the place look smart with a roll of yellow-and-black hazard tape. If you haven’t got any traffic cones, then at least use the clients’ wheelie bins to mark out a neat enclosure.

So in the unfortunate event that somebody should carelessly drive into your pallet of bricks or jumbo bag of sand, then at least you could offer a defence that you had done your best to make it visible.

Take photographs of your taped-off stretch of road, just in case.

And never underestimate the stupidity of the passer-by.

On one occasion I was having a tree removed, that was overhanging the pavement. My mate was up the tree with his chainsaw, and I was his ground man, lowering a hefty bough that was attached to a rope.

Just as the familiar cracking sound indicated that the branch was coming down, a young mum with a push-chair kicked aside the warning sign and cone on the pavement and walked right underneath it.

I just ‘abought’ managed to hold on!

Jeff Howell

E-mail Jeff via his website www.askjeff.co.uk

I

PROFESSIONAL BUILDER NOVEMBER 2019 97

Advertisement index Aanco UK Ltd ........................................(page 27) Aanco UK Ltd ........................................(page 29) Ariston Thermo UK Ltd ............................(page 46) Artex Ltd ...............................................(page 18) Blakes Building Profiles Ltd ...................... (page 85) Bond It ..................................................(page 74) Buckler Boots Ltd ....................................(page 70) Build Aviator ...........................................(page 6) Carhartt B.V. .........................................(page 80) Cromar Building Products Ltd ...................(page 49) Drew Brady & Co Ltd .............................(page 75) Eclisse UK .............................................(page 23) Elfin Kitchens .........................................(page 55) Eternit Slates.......................................... (page 74) F Ball & Co. Ltd .....................................(page 51) Federation of Master Builders ..................(page 73) Fernox Alpha Fry Ltd ..............................(page 42) Festool UK Ltd........................................ (page 24) Ford Motor Co Ltd ..................................(page 10) Google UK Ltd..................................... (pages 4,5) Isuzu D-Max ...............................(inside front cover) James Latham ........................................(page 16) Karndean Design Flooring .......................(page 65) Kohler Mira Ltd ......................................(page 38) MAN Truck & Bus Ltd .............................(page 56) Marmox UK Ltd ......................................(page 55) Muck Truck ............................................(page 85)

98 NOVEMBER 2019 PROFESSIONAL BUILDER

Norbord Europe Ltd ...............................(page 19) Permaroof (UK) Ltd ................................. (page 62) Plumb Partners Group Ltd ........................ (page 13) Pnu-Point Ltd ..........................................(page 76) Polypipe plc ..........................................(page 52) Premier Tech Aqua Ltd ............................ (page 40) Pro Builder Live ......................................(page 88) Quickslide ...............................................(page 7) Royd UK (ACER) ....................................(page 26) Royd UK (OPTIMAXX)............................. (page 91) RSS Tilemaster ....................................... (page 76) Safeguard Europe Ltd .............................(page 83) SDV Roof Racks (Clitheroe) Ltd .................(page 62) Sika Everbuild .......................................(page 77) Snickers Work Wear Ltd............................ (page 8) Snug Solutions Ltd ..................................(page 55) Stelrad Radiators ...................................(page 41) Tarmac Cement & Lime Ltd ......................(page 15) Toolbank Marketing Services ................... (page 60) Toolfair Exhibition .................................(page 68) TradesTalk .............................................(page 80) TuffX Processed Glass Ltd ........................(page 45) Ubbink UK Ltd .......................................(page 77) Unilite Ltd ..............................................(page 87) Velux Co. Ltd .........................................(page 33) Winn & Coales Denso Ltd .......................(page 67) Zarges UK Ltd ........................................(page 31)

WANT TO KNOW MORE? TO HELP YOU FIND OUT MORE ABOUT ANYTHING YOU’VE SEEN IN THIS ISSUE, WE’VE INTRODUCED A NEW DIGITAL INFORMATION SERVICE. RDR.LINK IS DESIGNED TO GET YOU FASTER ACCESS STRAIGHT TO THE EXACT ONLINE PLATFORM THAT HAS THE SPECIFIC INFORMATION YOU WANT. FROM VIDEOS TO TECHNICAL GUIDES, PDF’S TO PODCASTS – RDR.LINK WILL TAKE YOU STRAIGHT THERE.

re r cent mo p to 50 pe models. ernative

d to alt t compare

efficien

No.1

ENT

EQUIPM TOOLS &

SH THE BRU

OFF

New Series

in use for the tool is ns where less applicatio time, brush periods of ly less heat extended ce considerab to motors produ surface compared ing tely at the hous . This ultima alternatives tors can brushed , as opera ctivity of produ increases ut concerns to work witho ntly, this eque continue Subs eating. rs have the tool overh brushless moto that up to s also mean some cases times – in longer run more. friction 30 per cent applying ut brushes motor can Witho curre rever less brush term ngs are also on the motor, a weight – across the and windi within the r) are torque per doubt come (the stato ted by ce more the You’ve no now, when magnets also produ r shaft and e is not affec motor’ by (the nal moto use torqu means r tool – but ‘brushless armature conventio this is beca ction. This a new powe ngs of the Looking shaft. heat produ looking for to use the lly mean? copper windi and surround the friction and required that actua first, it fixed and power is what does ed motor rotor) are efficiency that less ional brush , improving blocks as it es at a tradit : carbon tool – again lifespan of the tool netic Forc (the basic parts Mag ets the ronic four magn has of ard elect extending tenance. es), a ring r ), and a te, the on-bo currents towards less main (the brush (the rotor To opera include fewe requires rs ture ronic tor). moto arma elect s less stator coils stator), an benefit from h (commuta As brush circuit send can also When the rical switc ared to es are stator coils. g parts, they rotary elect the comp brush movin n ets and electric and act desig motors. This The magn armature receive the a more comp e brushed while the s a they on includ nary, nts, her that statio themselve curre tools the tools r rotate toget ets. r– means that commutato become and lighte n the magn er withi small gnets fits for can be motor shaft conduct a electroma major bene n blocks r ple The carbo een the stato and the tradespeo using current betw the the motor. By magnetic who use position of within the fields, rotor etic the for and and magn tools north negative positive and extended motor, which south poles es turn the the brush periods of within the . tool work ges. motors makes the brushed motor chan effective, or wear and Although This pulls suffer from prone to es make rotor’s are more the brush resists the the is because makes tear – this utator within magnet and comm the n, rotate s frictio contact with the rotor contact cause the brushes nuously. in motor. This ts conti tely resul ion of during The omiss which ultima regularly s brushless be replaced an incurring having to nt – as brushes make dibly efficie e of the tool, the lifetim ed, and the motors incre ce cost. friction creat y through maintenan motors don’t ongoing there is no energ ly, brushless trial utator, not waste Alternative or a comm tool does in hard indus n brushes ction. Even electric have carbo on-board heat produ ric d utilise an elect on instea s but r work the moto circuit and

some of will discuss the Makita teamgies available on le. series, the nolo espeop tool tech In our new benefit trad Tony innovative they can the most series, look at how Tech Talk s what lain exp market, and alment of the inst r at Makita In the first l Manage they can benefit nica Tech , Coleman are and how s motors brushles le. magnets ions of the tradespeop nts. The locat sed: the

MBER 90 SEPTE

I

STEP

BUILDER ESSIONAL 2019 PROF

ONE

tory d the s Enjoye nt a w en and th e? r o m w to kno

W

wer a 36V Battery Po lusion of m the inc nefits fro ion Z also be V Lithium80 18 o S7 tw DR The red by hium-ion ich is powe ed 18V Lit g as a motor, wh fully charg ice as lon A pair of almost tw ntly batteries. a will last kit is significa Ma Th m r. fro tool ard moto batteries nd the n sta ca a t only no is run on , t as tha ity ol to oductiv Lithium-Ion on-site pr kita’s 18V h) and Ma improves t (3A bu r, tes for longe t 22 minu ck be used can get ba e within jus also charg despeople batteries aning tra (6Ah) – me be n 55 minutes tor ca ickly. hless mo to work qu lise a brus tors are ols that uti hless mo Power to and kita’s brus ernatives ficial. Ma alt ne d be he ly us incredib duced ared to br re mp to co e t en costs du eps the ce ke more effici an o en n als er maint ced frictio result in few enting the tor. Redu ent, prev ide the mo onre consist ing mo friction ins as ol re to y inc ure of the bsequentl temperat ng and su overheati tool from uctivity. site prod brushless a and its out Makit nk/BH053 t more ab r.li To find ou logy visit www.rd techno

STEP

TWO

/ dr.link www.r e h . t y r e Locat the sto en d o f at the

T H R E E ink/ STEP .rdr.l

w he ww enter t code ly e p u im S e uniq er h t h it w brows into a

L .

R D R .

W W

FOUR S T E P e you will tak

It to the directly ource. res relative

0 0 0 0 0 / K IN

Professional BUILDING ■ FLOORING ■ PLUMBING ■ ROOFING ■ CARPENTRY ■ PAINTING AND DECORATING ■

Designed to help busy professionals...

0ROFESSIONAL "5),$).' ■ &,//2).' ■ 0,5-").' ■ 2//&).'

■ #!20%.429 ■ 0!).4).' !.$ $%#/2!4).' ■

- Ê /° ° ° - , Ê / °°°- , Ê /

iÊ- V > °°°Ê ÊÌ iÊV ÛiÀÃ>Ì ÌÌ«Ã\ÉÉÌÜ ÌÌiÀ°V É* Ú >}

ÌÌ«Ã\ÉÉÜÜÜ° ÃÌ>}À> °V É«À LÕ `iÀ >}ÊÊ

ÌÌ«Ã\ÉÉÜÜÜ°v>ViL °V É«À LÕ `iÀ iÊ

7 ÜÜÜ°«À LÕ `iÀ >}°V °Õ