Double Swivel Eye Bolts

European Quality

• Higher working load limits

• Full double swivel action giving greater flexibility and functionality

• Customisation of thread types and bolt lengths available in Australia

• Easier to use in more applications

• Eliminates the issues of offset loading with other swivel lifting points

• More sizes available on request

Manufactured using only heat certified Australian Steel WLL (Working Load Limit)

• Each eyebolt is clearly stamped with the permitted F2 WLL.

• F2 WLL - indicates safe use for non-axial lifts.

• F1 WLL - indicates loads which are in line with the axis of the threaded end of the eyebolt.

• F1 WLL allows up to four (4) times higher lifting capacity whilst maintaining a 6:1 design factor of safety

MastipTM recognises that the manifold is a vital part of the complete Hot Runner System and therefore designs every system to meet customer’s requirements including detailed designs for:

• Even part/cavity filling

• Balanced material flow

• Even heat profile

• Ideal for technical materials and fast colour changes

From single cavity to high cavity or multi material, thermal or valve gating, we can supply a system to suit your requirements. See pages 96-99 for more information.

Only suitable for manifold applications

With two heaters the SX nozzle is perfectly suited for all single nozzle applications. Independently controlled heater zones provide uniform temperature distribution along the length of the nozzle, making it ideal to process difficult plastics.