TRAINING CATALOG
SPRING 2026
HABEGGER CORP 2026 TRAINING SCHEDULE
SCAN HERE
to access the digital training catalog and register for classes today!
Class Topic: Motors Diagnostics
Unless otherwise noted, classes are $50 per student, Elite Dealer students are free.
If HVAC company owner attends ($50), two techs can attend as well for free.
Class Objective: This program will focus on understanding the operation of PSC motors, pulse width modulation motors, X13 motors, and variable speed motors.
Students will study how to diagnose these issues with these motors. They will also learn how to evaluate capacitors
Date of Class: Clarksburg 1/21 | Ona 1/22 | Greensburg 1/14 | Pittsburgh 1/13 all classes 8-9:30am
Class Topic: AC Controls
Class Objective: In this class we will study dissipation controls , TXVs, reversing valves, high and lowpressure cutouts, thermistors and transducers.
We will also be studying controlling a two stage A/C with a single stage thermostat and the Comfortmaker control board.
Date of Class: Clarksburg 2/11 | Ona 2/12 | Greensburg 2/4 | Pittsburgh 2/3 all classes 8-9:30am
To make a reservation, click the PREFERRED DATE above. Registration closes 48 hours before the training date or when the class is full.
Class Topic: Air Conditioning Installation & Start Up
Class Objective: This course is designed for HVAC Professionals who are responsible for proper installation and start up of Air Conditioning systems. Students will learn proper piping, vacuuming, charging, control wiring, and start up checks.
Date of Class: Clarksburg 3/11 | Ona 3/12 | Greensburg 3/4 | Pittsburgh 3/3 all classes 8-9:30am
Class Topic: Air Conditioning Service
Class Objective: We will focus on proper use of the psychrometer and thermometer to record and determine unit performance.
Students will focus on the use of factory data in system evaluation along with covering compressor evaluation and TXV evaluation.
Date of Class: Clarksburg 4/15 | Ona 4/16 | Greensburg 4/9 | Pittsburgh 4/8 all classes 8-9:30am
Class Topic: Basic Electric
Class Objective: This program will take new HVAC professionals from the service panel into the furnace through the door switch to the transformer then the thermostat and back to the control board then out to the contactor.
Students should bring their own multi-meter. They will learn how to use it.
During this early morning class your employees will get hands on meter readings giving them experience on 24 volt, 115 volt, and 230 volt circuits.
They will learn how to determine if the correct power is present and whether the ground is correct. This is a short program with focus on understanding proper electrical supply and nothing more.
Date of Class: Clarksburg 5/13 | Ona 5/14 | Greensburg 5/7 | Pittsburgh 5/6 all classes 8-9:30am
Class Topic: Mitsubishi M&P Application and Installation
Class Objective: Students will learn how application and installation of Mitsubishi M&P products along with how to use Linkdrive and the MXZ design tool.
Date of Class: Clarksburg 5/20 | Pittsburgh 5/19 all classes 8-12pm
Cost: Free to all students
To make a reservation, click the PREFERRED DATE above. Registration closes 48 hours before the training date or when the class is full.
SHARONVILLE
11413 Enterprise Park Drive
Sharonville, OH 45241
513.612.4700
Mon-Fri 7-5 Sat 8-12
MIAMISBURG
4500 Lyons Road Miamisburg, OH 45342
937.913.2601
Mon-Fri 7-5
CINCINNATI
4995 Winton Road
Cincinnati, OH 45232
513.681.6313
Mon-Fri 7-4:30 Sat 8-12
CINCINNATI EAST
5574 Wooster Pike
Cincinnati, OH 45227
513.873.7910
Mon-Fri 7-4:30
DAYTON
6700 Poe Avenue
Dayton, OH 45414
937.224.8050
Mon-Fri 7-5 Sat 8-12
LIMA
755 Industry Drive Lima, OH 45804
419.229.6824
Mon-Fri 7-5
N KENTUCKY
1810 Airport Exchange Blvd, Suite 100 Erlanger, KY 41018 phone: 859.746.2665 Mon-Fri 7-4:30
to access the digital training catalog and register for classes today!