The GYS Super Pro EV Charger is a flexible and low cost charging solution for all workshops, particularly where there is an existing 3 phase power supply.
Avoid a costly fixed installation that requires the vehicle to be moved to the charge point, instead simply plug the GYS Super Pro into any existing convenient power supply.
The flexible electronics in the product will automatically maximise the charge rate depending on the power supply it is connected to, up to 22kw (typically c 60-70 miles per hour) for 3 phase.
ref: 075320
EV & PHEV charging made simple
Available in June
Ideal for workshops & car dealers
• Suitable for Plug in Hybrids (PHEV) and full EV’s
• Supplied with single phase 13A, 3 phase power cable and carry case
• Long reach cables - total reach 6 m - power cable 1.1 m charging cable 4.9 m
• Time delay function (to take advantage of off-peak electricity rates)
• No need for costly fixed installation
• Easy to swap between single and 3 phase depending on the electrical outlet
• Complies with IEC 61851-1, EN62752 & EN62196
• IP55 protective rating
Modern batteries are under more and more pressure to power the ever growing electronics on a modern vehicle. Testing should be an integral part of any vehicle service, but many testers are not suitable for the modern batteries.
A modern tester should be able to test all modern batteries including AGM/EFB, they should also be able to test the starting system and the alternator. It is estimated that 1 in 4 vehicle batteries need charging and as many as 1 in 10 are nearing the end of their life.
Testing every vehicle’s battery when it comes into a workshop not only provides a fantastic service to your customers, but can also increase your battery sales considerably and prevent an imminent breakdown for your customer.
DBT 350
ref: 025868
Tests all lead acid batteries including AGM/EFB Stop Start
Tests charging systems & alternator
Alternator test 12/24V
Simple to use
ref: 024199
Professional battery tester providing highly accurate results with in-built printer
Tests charging systems & alternator
Alternator test 12V
Battery capacity: 30-220Ah
Thermal printer (no ink required)
UPGRADE YOUR TESTER & CHARGER and SAVE
ref: U89200
Workshop charger BATIUM 15.12
Battery tester PBT 700
£299.00
A professional workshop requires a charger that’s designed specifically for the modern battery types used in vehicles today.
A traditional style battery charger is not suitable for modern AGM & EFB batteries.
Using your old style charger on these batteries could damage the battery or the vehicle’s ECU’s.
GYS chargers offer full protection for vehicle electronics, charging all modern lead acid batteries safely and without the need to choose the type of battery.
BATIUM15.12
ref: 024632
Safely charges 6/12V lead acid batteries without the need to identify type Will charge deeply discharged batteries from as low as 1V Charges batteries from 35-225Ah
£170.00
EX VAT
✓ Provides protection for the vehicles’ electronics
✓ Safe to charge in situ - no need to disconnect from the battery
✓ Polarity reversal protection
✓ Incorrect voltage protection.
All Battery Types (LEAD ACID)
✓ Smart: advanced charging curves to suit the battery type e.g AGM, EFB, Stop Start, Silver/Calcium.
✓ A function allowing the user to charge the battery safely when the type is not known.
Traditional style battery chargers are not suitable for modern AGM and EFB batteries. Using your old style charger can cause damage to these batteries or the vehicles ECU.
GYS Smart chargers offer full protection for vehicle electronics and charge all modern lead acid batteries safely without the need to choose the battery type or remove the battery from the vehicle before charging.
✓ Provides protection for the vehicles’ electronics
✓ Safe to charge in situ - no need to disconnect from the battery
✓ Polarity reversal protection
✓ Incorrect voltage protection.
All Battery Types (LEAD ACID)
✓ Smart: advanced charging curves to suit the battery type e.g AGM, EFB, Stop Start, Silver/Calcium.
✓ A function allowing the user to charge the battery safely when the type is not known.
ALL LEAD ACID BATTERIES
As an industry that works almost exclusively with 12V battery systems, the news that Tesla are now fitting 16V Lithium batteries is quite an event and something that presents a servicing and repair challenge to the industry. Though these new models are unlikely to be a daily sight in most repair workshops, the Tesla Model Y is currently the No 1 selling EV in the UK which creates an immediate problem for windscreen repairers, (especially for ADAS), bodyshops and for used car sales, as 16V charging products are not that widespread .
GYS offer 16V Lithium solution.
The GYSFlash Battery Support units are widely used across the UK and many readers will be aware of the recently introduced ‘Connected’ versions of GYSFlash which can receive software updates. Within the connected GYSFlash range GYS offer 3 models which operate up to 24V and these are now able to charge and provide battery support for 16V Lithium.
All three of these products will allow you to keep a 6V, 12V ,24V or 16V lead or Lithium battery at a perfectly stabilised voltage during the diagnostic process.
FREE software update
For customers who already own one of the above 3 models the new Lithium 16V charging curve is free to download
Many mains powered starters in workshops today do not have the technology to be suitable to charge the latest battery types.
The GYS STARTIUM range offers full vehicle electronics protection with a powerful starter function. They are safe to use even when the lead acid battery type is unknown.
SMART CHARGER
Charges all types of lead acid batteries including AGM/EFB Start Stop.
SMART STARTER
Starts modern vehicles safely with protection for vehicle electronics.
ALL LEAD ACID BATTERIES
JUMP START
Safety 40-120Ah 50-180Ah
✓ Provides protection for the vehicles’ electronics
All Battery Types (LEAD ACID)
✓ Smart: advanced charging curves to suit the battery type e.g AGM, EFB, Stop Start, Silver/Calcium.
✓ A function allowing the user to charge the battery safely when the type is not known.
PRE-CHARGE 10mins 50-180Ah 180-200Ah
120160Ah 180-200Ah 50-240Ah 50-180Ah 180-200Ah
The GYS booster pack range allows users to start vehicles of any size. When choosing the right booster for your application there are two main points to consider:
1. The output of the booster pack, the booster pack will have a peak output, the max boost for a short burst, and a cranking output, the max boost for approximately 5 seconds.
2.The internal charger, the more advanced the internal battery charger is, the better the charge along with increasing the longevity of the booster pack.
GYSPACK 400 & LAMP
ref: U42045
Professional booster pack for occasional use
18Ah battery inside
0.6m cables 16mm2
Peak Current: 1250A
Cranking Current: 900A
GYSPACK PRO 800
ref: 072107
Ideal for starting cars, SUV’s, 4 x 4s, vans & camper vans
Professional booster pack for regular use
28Ah Spiral battery inside
1.8m cables 25mm2
Peak current: 2500A
Cranking current: 1320A
ref: 026339
Ideal for starting cars, SUVs, 4 x 4s, vans, camper vans & LCV
Professional booster pack for regular 12V use and occasional 24V
2 x 22Ah batteries inside
1.8m cables 25mm2
Peak Current: 3200A / 24V 1600A
Cranking Current: 1450A / 24V 1300A
PRO 12.24 CI
ref: 068162
Ideal for starting SUVs, 4 x 4s, camper vans, vans, LCV, HGV & coaches
Professional booster pack for regular 12V & 24V use 2 x 30Ah Premium Enersys batteries inside
2m cables 50mm2
Peak Current: 6200A / 24V 3100A
Cranking Current: 2400A / 24V 2250A
Battery Support Units are required to sustain the vehicles electronic system during diagnostic work. They ensure a stable voltage and deliver instantaneously the current required preventing disruption to the diagnostic process and protecting sensitive and expensive electronic components. Battery Support Units have become an essential tool for all workshops.
100 Amp
GYSFLASH 100.12
ref: 029002
Suitable for regular service work, basic diagnostic testing, ECU software updates/reprogramming & ADAS work.
Suitable for all battery types incl EFB & AGM Stop/Start plus Lithium batteries.
Supplied with a 5m cable
100 Amp
GYSFLASH 101.24
ref: 025967
Suitable for regular service work, basic diagnostic testing, ECU software updates/reprogramming & ADAS work.
Suitable for 24V
Suitable for all battery types incl EFB & AGM Stop/Start plus Lithium batteries.
Now with a charging curve for 16v Lithium batteries to download Features connected technology allowing software updates & connection to peripherals e.g printer, scanner, keyboard etc.
100 Amp
GYSFLASH 103.12
ref: U72008
Suitable for regular service work, basic diagnostic testing, ECU software updates/reprogramming & ADAS work.
Suitable for all battery types incl EFB & AGM Stop/Start plus Lithium batteries.
Magnetic fixing suitable for mounting to a ramp
Diagnostic work without a battery support unit could cause:
- Damage to expensive ECU’s and sensitive electronics
- Inability to wind-back electronic parking brakes
- Power surges or spikes
- Information loss during software downloads
GYSFlash range have the following functionality:
Provide stable voltage and current on demand during diagnostic testing.
Provide protection for the vehicles’ electronics
Safe to charge in situno need to disconnect the battery.
Suitable for all battery types incl EFB & AGM Stop/Start
Universal mode allows the user to charge the battery safely when the type is not
120 Amp
GYSFLASH 125.12 with TROLLEY
ref: U27863
120 Amp battery support unit for workshops carrying out diagnostic work on newer technically advanced vehicles that requires the latest connected technology
Recommended
Features connected technology allowing software updates.
Can be connected to a printer, keyboard and bar code scanner.
£1,277.00
UNIT ONLY
GYSFLASH 125.12
ref: 028883
SPECIAL PROMO PRICE EX VAT List Price Ex VAT
£1533.00
£1,154.00
Induction heating is the process of heating metal by electromagnets, this makes induction heaters a safe alternative to using an oxy acetylene torch around the workshop.
Removing oxy acetylene bottles from a workshop could save up to 30% on your workshop insurance.
POWERDUCTION 10R
ref: 068643
Single phase 240V - 1.2kW
Heats M10 bolt in 10 seconds
Air cooled
Compact and lightweight (3.5kg)
Comfortable shoulder strap
Supplied with carry case and 5 inductors
POWERDUCTION 110LG
ref: U58590
Three phase 400V - 11kW
Heats M18 bolt in 1 second
Liquid cooled
Supplied with a 32L & L90 inductor head
£5,637.50
CHECK OUT
POWERDUCTION 10R on Workshop Diaries
Induction is a versatile heating process providing instant and powerful heat to release/separate dissimilar metals or preheat steel or aluminium for a range of purposes.
• Seized wheel nuts
• Brake bleed nipples
• Exhaust manifold bolts
• Brake discs
• Brake hoses
• Exhaust flanges
• Exhaust pipes
• Shock absorber nuts
• Loosening bolts
• Removal of steel or aluminium parts
• Straightening bent frames
POWERDUCTION 37LG
ref: U20226
Single phase 240V - 3.7kW
Heats M10 bolt in 1 second
Liquid cooled
Compact and portable (15kg)
Supplied with a S90 inductor
The NEW KRONOS RANGE have a highly efficient, multi-process power source with a intuitive colour interface providing easy navigation.
With two user modes:
Expert and Easy
In-built powerful four-roll drive system
Stores 200 welding jobs
ref:074996
Multi-process: MIG/MAG, MMA DC/Pulse & TIG DC/Pulse
Single phase
Integrated wire feeder
Compatible with wire diameters 0.8mm to 1.2mm
Welding current: 15-250A
Digital arc control with instant ignition
Takes 5kg & 15kg wire reels
Supplied with 3m MIG 25 torch & 3m earth lead
Eco Design CompliantHigh efficiency, less power consumption
The adjustable inductance (Self) changes the arc characteristics in MIG / MAG ws for even more elding as a result.
Voltage, Current and Energy measurements
The MU built frame. impact-p the
Storing and recalling jobs
Welding-cycle settings
The adjustable inductance (Self) changes the arc characteristics in MIG / MAG elding and allows for even more precise welding as a result.
The EASYMIG 160 combines MIG/MAG, cored wire and ARC welding processes. A simple user-friendly interface, makes voltage and wire speed setting fast and accurate. These machines are lightweight and highly portable. Ideal for welding steel, stainless steel and occasionally Aluminium Quick and easy the ideal welder for automotive, light maintenance, DIY and hobbyist applications.
ref: U62255
Inverter powered MIG welder that also does MMA (Arc welding)
160 Amp single phase
30-160 Amp MIG/ 20-140 Amp MMA
Takes 1kg & 5kg wire reels
Supplied with euro torch, earth clamp, electrode holder, truecolor welding helmet, 0.8mm MIG wire steel, regulator & leather welding gauntlets
The adjustable inductance (Self) changes the arc characteristics in MIG / MAG welding and allows for even more precise welding as a result.
The MULTIWELD is a single phase welding machine, combining MIG, cored wire and MMA welding processes. Highly portable and suitable for steel, stainless steel and aluminium, integrates two digital displays offering simple and accurate settings. Fitted with a powerful 4 drive roll wire feed system, offering smooth wire feed even on aluminium.
ref: U66595
200 Amp single phase
Takes 5kg & 15kg wire reels
Requires 16A input supply (can work up to 160A with 13A plug) Supplied with euro torch, earth clamp and electrode holder
impact-protection
The adjustable inductance (Self) changes the arc characteristics in MIG / MAG welding and allows for even more precise welding as a result.
impact-protection the welding
Welding thin body materials requires a stable arc at low current the GYS E1 & E3 operates from 10 Amp, the lowest in its class making MIG Brazing and Aluminium welding much easier.
Input the thickness of the material to be welded into the GYS E1 & E3; it will automatically select the optimum welding perameters.
GYS E1 AUTO
ref: U75120
Single phase
10-200A current range
Output adjustable in increments of just 0.1A
Easy or Expert mode
Can take 5kg & 15kg wire reels
High quality 4 roll wire feeder rollers for consistent speed and supply
GYS E3 AUTO
ref: U75165
Single phase
10-200A current range
ADJUSTABLE INDUCTANCE
The adjustable inductance (Self) changes the arc characteristics in MIG / MAG welding and allows for even more precise welding as a result.
Output adjustable in increments of just 0.1A
Easy or Expert mode
Can take 5kg wire reel
High quality 4 roll wire feeder rollers for consistent speed and supply
THREE PROCESSES
Suitable for MIG brazing with CuSi3 wire
A helmet is essential PPE for any welding or grinding application, it not only provides protection against sparks and mechanical hazards, it also protects against arc-eye, a condition caused when the eyes are exposed to too much ultraviolet (UV) light.
HSE Bulletin STSU1-2019 states that “All business undertaking welding activities should ensure effective engineering controls are provided and correctly used to control fume arising from those welding activities.” These controls should include fume extraction and/or Air fed welding helmets, both can be provided by GYS.
GYSMATIC 5/13 AIR XXL TRUECOLOR
Air Fed Welding Helmet ref: 028852
Truecolor technology
3 speed motor up to 220 litres of air per minute
4 sensor lens
Up to 8h battery life (lithium battery), perfectly suited for extended welding sessions
Large carry bag for the helmet and its respiratory unit
£549.00
042513
TECHNO 9/13 ref: 065048
ZEUS 5-9/9-13
COSMIC ref: 044104
068698
Plasma cutters provides a quick and easy solution to repairing vehicles and equipment.
GYS systems are portable and easy to use, with even higher cutting speeds than flame cutting. Due to its versatility, plasma technology offers the possibility of cutting a wide variety of conductive materials up to a thickness of 57mm.
EASYCUT 25 & TROLLEY
ref: U85543
Single phase plasma cutter, ultra compact and portable
Suitable for all types of metal up to 8mm steel / 6mm aluminium (max severance cut)
Requires 4.5 bar, 115l/min compressor
Supplied with 4m detachable torch and earth clamp
£747.00
EASYCUT 40
ref: 029743
Single phase plasma cutter, digital pressure sensor
Suitable for all types of metal up to 20mm steel / 15mm aluminium (max severance cut)
Requires 4.5 bar, 115l/min compressor
Supplied with 4m detachable torch & earth clamp
£869.00
NEOCUT 105
ref: 063112
Three phase plasma cutter
Digital Pressure Sensor
Suitable for all types of metal up to 40mm steel / 35mm aluminium (max severance cut)
Requires 5.5 bar, 305l/min compressor
Supplied with 4m detachable torch & earth clamp
£4,732.00
ref: U73616
The most advanced starter charger on the market and the FIRST that features INVERTER TECHNOLOGY, capable of charging and starting virtually every vehicle on the road, it will even start tanks, helicopters and airplanes.
STARTER
• Jump starts everything from a motorbike to a tank
• Inverter technology ensures high-power supply over a longer cranking period
• Jump Starts lead acid, Start Stop and Lithium batteries
• Instant pre-charge for faster starting of heavily discharged HGV & Bus batteries
• Suitable for 6V, 12V & 24V batteries
CHARGER
• Capable of charging all lead acid batteries including Stop Start & Traction.
• 9 step Lithium Charger with cell balancer, for LiFePO₄, LI-ION, LFP CELL+ & LI-ON CELL+ batteries
• Automatic de-sulphate during charging, for a longer battery life
• Recovers dead batteries from 1V
BATTERY SUPPORT UNIT
• 120Amp Battery Support Unit
• Provides stable power supply during Diagnostic, ADAS & re-programming
• Connected Technology for downloading data & uploading new charging curves. Now available to download - 16V lithium charging curve suitable for Tesla Model Y
