Institute for Frontier Materials Annual Report 2018 Part 2

Institute for Frontier Materials Annual Report 2018 Part 2 Financial Reports, Grants and Publications

Geelong & Melbourne | Victoria | Australia

CONTENTS 3 IFM Financial Summary 2018 3 Total research income by category

4 IFM Performance 2015-2018 4 HDR Student Load 4 HDR Student Completions 4 Publications (Journal articles)

4

2018 Grant Applications

5 Grant Holders and their Projects 22 Publications

2

deakin.edu.au/ifm

IFM FINANCIAL SUMMARY 2018 Total research income by category - actual 2018 ($M) Financial Summary - For Period Ended 31 December 2018

2018 Actual $

Income Research Income Other Income

13,450,981 581,385

Research Allocation / University Contribution

19,564,649

Total Income

33,597,015

Employment costs Academic Salaries General Salaries Other Employment Costs Contractors Total Employment Costs

16,794,053 6,326,019 -47,935 3,719 23,075,856

Non Salary Expenses Buildings and Grounds Infrastructure Costs

294,119

Communication / Advertising, Marketing and Promotions

119,588

Consumables

1,323,894

Depreciation and Amortisation

3,252,610

Equipment - Repairs, Maintenance and Other Costs

1,462,682

Other Costs

1,094,879

Professional, Legal and Consultants Staff Recruiting, Training and Other / Library Information Resource Expenses

18,906 392,670

Student Expenses

1,458,810

Travel, Catering and Entertainment

1,103,000

Total Non Salary Expenses

Surplus / Deficit

10,521,159 0

3

IFM PERFORMANCE 2015-2018 HDR Student Load (Equivalent Full Time, 2015-2018) 2015

2016

2017

2018

143.1

143.1

139.3

150.1

HDR Student Completions (2015-2018) 2015

2016

2017

2018

30

36

50

31

Publications (Journal articles, 2015-2018) 2015

2016

2017

2018

260

334

319

375

2018 Grant Applications Grants

Amount Awarded

Reportable - Category 1

$10,540,000

Reportable - Category 2-4

$12,259,848

Total

$22,799,848

The amount awarded represents the amount awarded over the total life of the project as initially communicated by the funding agency.

ACG (Austraian Competitive Research Grants - Category 1) is the term used to describe a group of some 70 research grant schemes to which all universities can apply and where awards are based on merit of the application and the research team.

The ARC and NHMRC are two of the major funding bodies included in this list.

Other public (Other Public Sector Research funding - Category 2) is government funding, Federal or State, from schemes not included in the ACG group and not necessarily determined through a competitive process; it includes contract research and research-related consultancies.

Industry (Industry and Other Funding - Category 3) includes all research funding from industry, international sources, donations, bequests and foundations, and Higher Degree by Research fee income for domestic and international students.

CRC (Category 4) is a university’s research income from Cooperative Research Centres excluding their own contribution.

Note: CRC income is based on financial year results.

4

deakin.edu.au/ifm

GRANT HOLDERS AND THEIR PROJECTS

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Australian Research Council Australian Research Council Industrial Transformation Research Hub Prof Xinhua Wu, A/Prof Daniel Fabijanic, Prof Christopher Davies, Dr Wenyi Yan, Dr Mark Easton, Prof Yi-Bing Cheng, A/Prof Matthew Dargusch, A/Prof Bernard Rolfe, Prof Lyndon Edwards, Mr Damien Miller, Mr Gavin Becker, Dr Emilie Herny, Dr Robert Hobbs, Dr Roger Lumley, Mr Thomas Hawkes, Mr Kevin Lee

ARC Research Hub for Transforming Australia’s Manufacturing Industry through High Value Additive Manufacturing led by Monash University

2013-2018

1,321

Prof Xungai Wang, Prof Bronwyn Fox, Prof Tong Lin, Prof Russell Varley, A/Prof Joselito Razal, A/Prof Jingliang Li, A/Prof Luke Henderson, Dr Nolene Byrne, Dr Rangam Rajkhowa, Dr Alessandra Sutti, Dr Minoo Naebe, Dr Christopher Hurren, Dr Mandy De Souza, Dr Murray Height, A/Prof Mark Kirkland, Mr Ashley Denmead, Mr Salwan Al-Assafi, A/Prof Rodney Dilley, Prof Marcus Atlas, Mr Grant Mackintosh, Dr Ian Blanchonette, Dr Linda Hillbrick, Dr Tony Pierlot, Prof Gregory Rutledge, A/Prof Friedrich Vollrath, Prof David Kaplan, Prof Uwe Pieles, Dr Rudolf Hufenus, A/Prof Jeffrey Wiggins

A World Class Future Fibre Industry Transformation Research Hub

2016-2021 HeiQ Pty Ltd, Carbon Revolution Pty Ltd, Quickstep Automotive Pty Ltd, Ear Science Institute Australia Inc, Draggin Jeans Pty Ltd, CSIRO

4,745

A/Prof Wenhui Duan; Prof Sritawat Kitipornchai; Prof Aibing Yu; Prof Priyan Mendis; Prof Vute Sirivivatnanon; Prof Sujeeva Setunge; Dr Chao Chen; Prof Qipeng Guo; Prof Bijan Samali; Prof Guowei Ma; Dr David Law; Prof Chun-Qing Li; Prof Zhong Tao; Dr Rackel San Nicolas; Dr Wengui Li; Dr Kwesi Sagoe-Crentsil; Dr Warren South; Prof Tongbo Sui; Dr Phillip Arena; Prof Jannie Van Deventer; Mr Thomas Hanly; Dr Richard Yeo; Mr Brian O’Donnell; Dr Ming Zhou; Mr Nelson Hiscock; Mr Bill Martin; Dr Steve Pascoe; Mr Roland Davies; Dr Yew-Chin Koay; Mr Joel Brown; Mr Fraser Tonner; Prof Surendra Shah; Prof Chien Ming Wang; Dr Redmond Lloyd; Dr Louise Keyte; Mr William Thompson; A/Prof Claire White; Mr Stephen Darwell

ARC Research Hub for Nanoscience-based Construction Material Manufacturing, led by Monash University

2016-2021 Boral Construction Materials Ltd, CSR Building Products Ltd, Cement Concrete & Aggregates Australia; Sinoma International Engineering Co Ltd; Zeobond Research Pty Ltd; Advanced Material Group; Fortis Adhesives & Coatings Pty Ltd; ARRB Group Ltd; Centre For Pavement Excellence Asia Pacific Ltd; Jiangsu Rongchang Group; Markham Global; AGL Loy Yang Pty Ltd; Energy Australia Pty Ltd; Adbri Masonry Pty Ltd; Roads Corporation; Airey Taylor Pty Ltd; Argos FRP Pty Ltd

5,000

5

Grant Holders and their Projects - continued

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Australian Research Council Industrial Transformation Research Hub - continued Zhao Yang Dong; Guoxiu Wang; Rose Amal; Kondo-Francois Aguey-Zinsou; Jie Bao; Chun Wang; Maria SkyllasKazacos; Chris Menictas; Patrick Howlett; Liming Dai; Da-Wei Wang; Ke Meng; Jason Scott; Vicki Chen; Ziyuan Tong; Anna Bruce; Alistair Sproul; Iain MacGill; Andrew Rider; Jing Qiu; Aniruddha Kulkarni; Sarbjit Giddey; Hongming Yang; Shuo Chen; Yan Li; Mark Leckenby; Te Tan; Michael Jansen; Vera Lockett; Peter Olek; Enej Catovic

ARC Research Hub for Integrated Energy Storage Solutions, led

by University of NSW

2019-2024 University of Technology Sydney; Deakin University; Commonwealth Scientific and Industrial Research Organisation; Defence Science and Technology Organisation; Shenzhen Shengshi Investment & Development Group; Zhuzhou HuaAo Energy Technology Co Ltd; Tianjin Beifang Hengye Electric Technology Co., Ltd; Enopte Pty Ltd; The trustee for the A Violi Family Trust; Axowind Holdigns Pty Ltd; Shangxi Hetang Stockbreeding Pty Ltd; Printed Energy Pty Ltd; Power Technology Engineered Solutions Pty Ltd

Prof Xiwang Zhang; Prof Huanting Wang; Prof Mikel Duke; Prof Matthew Hill; Prof Gregory Leslie; Prof Joao Diniz da Costa; Prof Stephen Gray; Prof Long Nghiem; Prof Graeme Millar; Prof Lingxue Kong; Prof Shaomin Liu; Prof Ho Kyong Shon; A/Prof Pierre Le-Clech; Dr Lian Zhang; A/Prof Andrew Hoadley; A/Prof Simon Smart; Dr Ludovic DumĂŠe; Dr Aaron Thornton; Bahay Ozcakmak; Peter Bury; Gregory Stephen; Chaoxun Zhao; Rui Zeng; Weiming Zhang; Anthony Fane; Menachem Elimelech; Meng Zhuge; Bingcai Pan; Shanwen Tao; Michael Davies; Andrew Horton; Alastair Lockey; Xiaofeng Yang

ARC Research Hub for Energy-efficient Separation, led by Monash University

2018-2022 ARC

3,058

4,000

Australian Research Council Industrial Transformation Training Centre Prof Matthew Barnett; Prof Peter Hodgson; A/Prof Daniel Fabijanic; Prof Ming-Xing Zhang; Dr Jeffrey Gates; Prof Christopher Hutchinson; Dr Christopher Solnordal; Dr Balamurali Hebbar Majil; Kuno Brautigam; Tony Klein; Alexander Lewis-Gray; Kevin Dolman

6

deakin.edu.au/ifm

ARC Training Centre in Alloy Innovation for Mining Efficiency

2017-2022 Keech Castings Aus, Gekko Systems, Weir Minerals, IXL Metal Castings, Cast Bonding Aus, Hycast Metals, Trelleborg Engineered Systems Aus, Newcrest Mining, CSIRO, Central Institute of Mining, Austmine Limited, METS Ignited Australia, Materials Solutions, Australian Foundry Institute

4,881

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Australian Research Council Industrial Transformation Training Centre - continued Prof Chun Wang; Prof Adrian Mouritz; Prof Stuart Bateman; Prof Mark Easton; Prof Milan Brandt; A/Prof Martin Leary; Prof Michael Cardew-Hall; A/Prof Paul Compston; Dr Matthew Doolan; Prof Matthew Barnett; A/Prof Bernard Rolfe; Dr Matthias Weiss; Dr Minoo Naebe; Dr Luke Henderson; Mr Richard Taube; Dr Bita Ghaffari; Dr Nia Harrison; Dr Adam Best; Dr Russell Varley; Dr Richard Evans; Mr Henry Wolfkamp; Mr Brian Hughes; Mr Carl De Koning; Mr Richard Axe; Mr Edward Albert; Mr Brian Oxley; Mr Albert Sedlmaier; Prof Anthony Kinloch; Prof Michael Wisnom; A/Prof Paul Sanders; Prof Dr Marion Merklein

ARC Training Centre 2016-2021 Ford Motor Company in Lightweight of Australia, Automotive Structures Australian Rollforming (ATLAS), led by RMIT Manufacturers, Composite University Materials Engineering, Quickstep Automotive, Capral Aluminium, MTM Pty Ltd, CSIRO, Data M Sheet Metal Solutions, Shape Corporation

Prof Maria Forsyth; Prof Dan Li; Prof Douglas MacFarlane; Prof Abbas Kouzani; Prof Peter Talbot; A/Prof Jennifer Pringle; Prof Patrick Howlett; Dr Robert Kerr; Prof Saeid Nahavandi; Dr Michael Fielding; Prof Jose Alarco, Dr Parama Banerjee, Dr Mega Kar, Dr Justine Walter; Dr John Chiefari; Dr Andrew Rider; Dr Yufei Wang; Dr Mark Sceats; A/Prof Drew Evans; Herbert Ho; Simon Savage; Michael Portman; Richard Brodribb; Timothy Macpherson

ARC Training Centre for Future Energy Storage Technologies

2019-2023 ARC Industrial Transformation Training

3,024

4,429

Australian Research Council Linkage Infrastructure Equipment and Facilities (LIEF) Prof Christopher McConville; Prof Dougal McCulloch; A/Prof Madhu Bhaskaran; A/Prof Lan Wang; A/Prof Brant Gibson; Prof Laurence Meagher; Dr Sebastian Thomas; A/Prof Joselito Razal; Dr Ludovic Dumée; Dr Luhua Li; Prof David Jamieson

Advanced Multifunctional Photoelectron Spectroscopy Platform, led by RMIT University

2018

ARC

595

Prof Gordon Wallace; Prof Peter Innis; Dr Stephen Beirne; A/Prof Jeremy Crook; Prof Xungai Wang; Prof Gerard Sutton; Prof Patrick Coates; Prof Peter Choong; A/Prof Christopher Baker

3D Additive BioFabrication Facility: Printing Bioprinters, led by University of Wollongong

2018

ARC

347

Prof Guoxiu Wang; A/Prof Andrew McDonagh; Dr Bing Sun; A/Prof Rongkun Zheng; Prof Geoffrey Smith; A/Prof Kondo-Francois Aguey-Zinsou; A/Prof Jun Ma; Prof Ying Chen; Prof Michael Cortie; Prof Hua Liu; Dr Wei Kong Pang

Atomic layer nanofabrication system for multi-functional applications, led by Univ Technology Sydney

2018

ARC

425

Prof Zai Guo; Prof Roger Lewis; Dr Wei Kong Pang; Prof Jun Chen; Prof Ying Chen; Prof Guoxiu Wang; Prof Brendan Kennedy; Dr Dewei Chu; Dr Neeraj Sharma; Prof Vanessa Peterson

Thermo-gravimetric infra-red imaging system for functional materials study, led

by University of Wollongong

2018

ARC

326

7

Grant Holders and their Projects - continued

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Australian Research Council Linkage Infrastructure Equipment and Facilities (LIEF) - continued Prof Maria Forsyth; A/Prof Patrick Howlett; Dr Daniel Fabijanic; Prof Peter Hodgson; Prof Nick Birbilis; Dr Sebastian Thomas; Prof Dougal McCulloch; Dr James Partridge

A glow discharge optical emission spectrometer for challenging surfaces

2018

ARC

264

Rajiv Padhye; Lijing Wang; Xin Wang; Cuie Wen; Tong Lin; Xungai Wang; Olga Troynikov; Nishar Hameed

Manikin Flash Fire Evaluation System for material thermal protection, led by RMIT University

2019

ARC

514

Zongyou Yin; Michelle Coote; Yun Liu; Kylie Catchpole; Hark Tan; Xiu Song Zhao; Douglas MacFarlane; Rose Amal; Yun Hau Ng; Guohua Jia; Yuan Chen; Ying Chen; Chuan Zhao; Alexandr Simonov

Multi-angle inoperando mapping of nanoscale electro/ photo-redox reactions, led by ANU

2019

ARC

376

Qiaoliang Bao; Igor Aharonovich; Kourosh Kalantar-zadeh; Wenlong Cheng; Yuerui Lu; Jacek Jasieniak; Nicolas Voelcker; Min Gu; Luhua Li; Mark Banaszak Holl; Tao Wu; Matthew Phillips; Brian Abbey; Ann Roberts; Dan Li

Multi-functional 3D imaging system for micro and nanoscale devices, led by Monash University

2019

ARC

809

Australian Research Council Linkage

8

Dr Daniel Wilkosz, Mr Richard Taube, Henry Wolfkamp, A/Prof Bernard Rolfe, Prof Peter Hodgson, Dr Matthias Weiss

Micro-roll forming of metal bipolar plates for fuel cells

2015-2018 Australian Rollforming Manufacturers, Ford Motor Co Australia

212

A/Prof Rimma Lapovok, Prof Andrey Molotnikov, Dr Christopher Davies

Innovative aluminium extrusion: increased productivity through simulation

2015-2018 Capral Ltd

285

Prof Peter Hodgson; Prof Nick Birbilis; A/Prof Nicole Stanford; Dr Thomas Dorin; Dr Justin Lamb; Mr John Carr; Mr Victor Dangerfield

Development of novel high performance aluminium alloys containing scandium

2016-2018 Universal Alloy Corporation, Clean TeQ Ltd

400

Prof Tong Lin, Dr Jian Fang, Dr Xu Wang

Self-Powered Active Noise Controllers with a Nanofibre Acoustoelectric Converter

2018-2021 Meikemai Nano Technology, Jiangxi Shan Ren Science and Technology Pty Ltd

818

Prof Ying Chen, Chun Hou, Andrew Parratt

Improving battery safety with thermally stable materials

2018-2021 BOLT Technologies Co Ltd, DARVAT Pty Ltd

531

deakin.edu.au/ifm

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Australian Research Council Discovery Prof Peter Hodgson, A/Prof Nicole Stanford, Dr Ross Marceau

Cluster hardening of 2015-2018 ARC metastable steel alloys produced by thin strip casting

333

Prof Michel Armand, Dr Alexey Glushenkov, A/Prof Patrick Howlett, Prof Maria Forsyth

Advanced Na battery technology; key to transforming society’s energy use

2015-2018 ARC

621

Dr Christopher Hutchinson, Prof Matthew Barnett, Prof Alexis Deschamps

A new paradigm for creating fatigueresistant light metals - Monash University

2015-2018 ARC

120

A/Prof Jenny Pringle, Adj/Prof Anthony Hollenkamp, Prof Peter Bruce

Increasing solid electrolyte conductivity through defect design

2017-2019 ARC

322

A/Prof Joselito Razal, Dr Maryam Naebe, Prof Xungai Wang

Understanding the true potential and limitations of novel fibres

2017-2019 ARC

278

Prof Maria Forsyth, Dr Anthony Somers, Prof Margaret Ackland, Dr Laura Machuca Suarez, Prof Herman Terryn

Multifunctional and environmentally friendly corrosion inhibitor systems

2018-2020 ARC

392

Dr Jing Fu, Dr Ross Marceau, Prof Jian Li

Engineering approaches towards atomic imaging of bacterial cells, led by Monash University

2018-2020 ARC

392

Prof Simon Moulton, Dr George Greene; Prof Robert Kapsa, Dr Anita Quigley

Ultra-low fouling active surfaces, led by Swinburne University

2018-2020 ARC

618

Prof Tiffany Walsh; A/Prof Luke Henderson; Prof Russell Varley

Interfacial Design for High Performance Carbon Fibre Polymer Composites

2018-2020 ARC

211

Prof Tong Lin, Dr Jian Fang

Microstructure Effect on Energy Harvesting Ability of Electrospun Fibres

2018-2020 ARC

342

Prof Ying (Ian) Chen

Thermal Conductive Boron Nitride Nanosheets

2019-2021 ARC

450

Dr Weiwei Lei, Prof Yury Gogotsi, A/Prof Joselito Razal

Functionalized 2D nanomaterials (MXenes) for Future Energy Storage

2019-2021 ARC

424

9

Grant Holders and their Projects - continued

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Australian Research Council Discovery - continued Prof Tiffany Walsh, A/Prof Jonathan Rourke, Asst/Prof Neil Wilson

Mapping, modelling and manipulating graphene oxide

2019-2021 ARC

343

Dr Hong Wang, Zhongli Ji, Prof George Chase, Prof Tong Lin

Superwettability Effects on Oil-mist Coalescing Fibrous Filters

2019-2022 ARC

273

Dr Pingan Song, Prof Qipeng Guo, Dr Cristian Maluk, Prof Serge Bourbigot

Core-Shell 2019-2021 ARC Nanofibrous Bio-Based Flame Retardants with Reinforment Function - University of Southern Qld

310

Australian Research Council Discovery Early Career Researcher Awards Dr Luhua Li

Superior Adsorption Capability of Nanosheets for Surface Enhanced Raman

2016-2018 ARC

379

Dr Ludovic DumĂŠe

2D nanoporous membranes

2018-2021 ARC

371

Dr Thomas Dorin

New classes of aluminiummagnesium-silicon alloys via scandium additions

2019-2022 ARC

412

2014-2020 ARC

4,537

2019-2022 ARC

999

Australian Research Council Centre of Excellence Prof G.G. Wallace, Prof G. Spinks, Prof S. Dodds, Prof M. Forsyth, Prof D. R. MacFarlane, Prof M. Cook, Prof D. Officer, Prof S. Moulton, Prof G. Alici, Prof M. in het Panhuis, A/Prof P. Innis, A/Prof J. M. Crook, Prof M. Coote, A/Prof M. Higgins, A/Prof A. Mozer, Prof R. Kapsa, Prof L. Hancock, Prof L. Spiccia, A/Prof J. Pringle, A/Prof P. Howlett, Prof X. Wang, Prof B. Paull, Prof R. Sparrow, Dr. J. Zhang

ARC Centre of Excellence for Electromaterials Science, led by University of Wollongong

Australian Research Council Special Research Initiative Dr Will Gates, Prof Frank Collins, Mr Jonathan Miller, Dr Damien Callahan, Mr Anish Chandy

10

deakin.edu.au/ifm

Holistic Remediation of PFAS-affected Soils, Waters and Debris

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Other Commonwealth Funding CSIRO Prof Lingxue Kong

CSIRO Postgraduate Scholarships Manufacturing Aref Daneshfar

2016-2019 CSIRO

51

Prof Lingxue Kong, Dr Lijue Chen

In vitro and in vivo examination of gold nanoparticles RAFTed with polymers for cancer therapy

2017-2021 CSIRO Grant

50

Prof Matthew Barnett, Mr Tao Zhang

Additive manufacturing

2017-2020 CSIRO Scholarship

60

A/Prof Patrick Howlett

Lithium air electrolytes 2017-2020 CSIRO Grant

30

A/Prof Minoo Naebe, Mrs Jasjeet Kaur, Ms Sally Hutchinson, Ms Huma Khan, Prof Russell Varley

Bi-component Wet Spinning of Novel Carbon Fibre Precursors

59

2018-2021 CSIRO Scholarship

National Health and Medical Research Council Miss Emily Kerr

Point of care microRNA detection for the diagnosis and management of kidney disease in rural and remote areas remote areas

2017-2022 NHMRC ECF - Early Career Fellowship

331

Department of Economic Development, Jobs, Transport and Resources Dr Jinfeng Wang, Dr Jing Wang, A/Prof Joselito Razal

Development of photocatalyst modified filter for solar-induced direct air pollution degradation

2017-2019 Victoria-Jiangsu Technology and Innovation Grant

139

Dr Ludovic DumĂŠe, Prof Lingxue Kong, Dr Fenghua She

High adsorption air purification membranes for ultrafine pollen particles

2018-2020 Victoria-Jiangsu Technology and Innovation Grant

200

Prof Russell Varley

Development and industralisation of flame retardant epoxy resin for aerospace carbon fiber composite

2018-2020 Victoria-Jiangsu Technology and Innovation Grant

200

11

Grant Holders and their Projects - continued

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Defence Science & Technology Organisation (DSTO)

12

Prof Maria Forsyth, Dr Grant McAdam, Neil Wayne, Dr Anthony Somers

Multifunctional inhibitors for mitigation of microbiologically influenced corrosion

2017-2019 DSTO

320

Dr Daniel Fabijanic, Dr Ilana Timokhina, A/Prof Rimma Lapovok

Recycling of Titaniummachined swarf to form high quality powder for additive manufacturing - MyIP7902

2017-2018 DSTO

31

Dr Sitarama Kada, Dr Peter Lynch

X-Ray Line Profile Characterisation and Prediction of Microstructural Damage in Aerospace Materials Applications

2017-2018 DSTO

13

Dr Jin Zhang, Dr Mathew Joosten, Prof Russell Varley

Structural Maritime Composite Materials with Superior Wide Spectrum Damping

2018-2021 DSTO

59

Prof Ying (Ian) Chen, A/Prof Patrick Howlett, Prof Douglas MacFarlane, Prof Maria Forsyth

New materials for 2016-2019 Australia India Strategic large scale, high Research Foundation stability, high energy density batteries: from material design to prototype development

Dr Rangam Rajkhowa

3D printed functional composites from protein fibre particles for biomedical applications

Dr Daniel Fabijanic

Towards the 2017-2018 Dept of Industry, optimisation of a novel Innovation and Science titanium surface Global Innovation modification process Linkages program - phase II

49

Dr Omid Zabihi, A/Prof Minoo Naebe

Polymer Composite Materials for Construction Application

2019

Department of Industry, Innovation and Science, Demtech (Australia) Pty Ltd

80

Dr Emma Prime, Dr Andrew Negri, Prof Greg Qiao

Boosting Coral Abundance on the Great Barrier Reef

2018

QLD Department of Innovation, Tourism Industry Development & the Commonwealth Games

5

A/Prof R. Lapovok, Dr I. Timokhina, Dr J. Wang

Enhanced properties of TWIP steels by asymmetric rolling

2016-2018 Universities Australia/ German Academic Exchange Service (DAAD)

24

deakin.edu.au/ifm

2018-2019 Australia/India Strategic Research Fund (AISRF) Early- and Mid-Career Researcher (EMCR) Fellowships

1,000

24

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Defence Science & Technology Organisation (DSTO) - continued Dr Claudia Creighton, Dr Peter Lynch

Deakin-Australian synchrotron BRIGHT programme

2018-2021 Australian Nuclear Science Technology Organisation (ANSTO)

172

Prof Russell Varley, Dr Jane Zhang, Mr Houlei Gan

Next Generation 2018-2019 Department of Industry, Prepregs for Advanced Innovation and Science, Composite Materials GMS Composites Pty Ltd

68

Dr Matthias Weiss, Dr Buddhika Abeyrathna, Dr Thomas Dorin

Laser heat assisted roll 2019-2020 Universities Australia/ forming of new high German Academic strength Aluminium Exchange Service (DAAD) alloys for weight reduction in transport

25

Australian Institute of Nuclear Science and Engineering (AINSE) Dr Mark Tobin, Dr Ludovic DumĂŠe, Dr Nick Milne, Dr Frank Chen, Dominique (Dom) Appadoo, Jitraporn (Primm) Vongsvivut, Ms jingshi Wang,Prof Lingxue Kong, Mr Francois-Marie Jacques Allioux

Investigating the homogeneity, thickness, and fouling sensitivity of the plasma-synthesized polymer blend thin films for low-cost desalination

2018

AINSE Grant - Postgraduate Research Award

8

Dr Thomas Dorin

Understanding the 2017-2020 AINSE Grant co-precipitation postgraduate research mechanisms of award Al3(Sc,Zr) with Li-containing phases in Al-Cu-Li model alloys

Dr Ludovic DumĂŠe, Mr James Maina

Inorganic nanoparticles/metal organic frameworks hybrid membrane reactors for simultaneous separation and conversion of CO2

2016-2018 AINSE Grant postgraduate research award

Dr Nolene Byrne, A/Prof Tim Hilditch

Cracking in PE and other polymer pipes

2017-2019 Energy Pipelines CRC

164

Prof Mike Yongjun Tan

Predicting pipeline failure through corrosion modelling

2015-2018 Energy Pipelines CRC

114

Prof Russell Varley, A/Prof Minoo Naebe, Dr Mandy De Souza, A/Prof Luke Henderson, Dr Claudia Creighton, Mr Rodney Macaulay, Dr Richard Helmer, Mr Yao Ding, Dr Celine Vicard, Ms Akhila Mukkavilli, Dr Kathleen Beggs, Dr Erwan Castanet

Carbon Revolution and 2018-2020 Innovative Manfacturing Deakin Collaboration CRC Limited Composite Wheel Industralisation Project

Prof Mike Yongjun Tan

Pipeline condition monitoring sensors

8

22

Cooperative Research Centres

2015-2018 Energy Pipelines CRC

5,994

524

13

Grant Holders and their Projects - continued

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Cooperative Research Centres - continued Prof Mike Yongjun Tan

Cathodic shielding and 2015-2018 Energy Pipelines CRC corrosion under disbonded coatings

318

Prof Mike Yongjun Tan

Methods for assessing coating integrity and CP efficiency under complex pipeline conditions

2015-2018 Energy Pipelines CRC

338

Prof Mike Yongjun Tan, Mr Ivi Cicak

High voltage testing of dual layer FBE

2015-2018 Energy Pipelines CRC

115

Mr Ivi Cicak, Prof Mike Yongjun Tan

Assessing coating for pipelines installed by horizontal directional drilling (HDD)

2018-2019 Energy Pipelines CRC

122

Mr Ying Huo, Prof Mike Yongjun Tan

Shore Crossing 2018-2019 Energy Pipelines CRC Cathodic Protection Test Program - Phase 2

Dr Nolene Byrne, Prof Mike Yongjun Tan

The longevity and deterioration of polyethylene (PE) coatings on steel pipelines

2018-2019 Energy Pipelines CRC

102

Prof Mike Yongjun Tan

Subsea Pipelines Coatings Degradation - Scoping Study

2018-2019 Energy Pipelines CRC

8

A/Prof Daniel Fabijanic, Prof Matthew Barnett, Dr Santiago Corujeira Gallo

Long life alloy component for efficient hydrometallurgical processing

2018-2020 CRC-project, Callidus Welding Solutions, CSIRO, Murrin Murrin Operations, Newcrest

1,750

Dr Alessandra Sutti, Dr Paul Collins

HeiQ Australia Research Program 2014/15

2015-2019 HeiQ Australia Pty Ltd

1,833

Dr Jin Zhang, Dr Christopher Hurren, Prof Xungai Wang

Smart cotton/carbon fabrics for electromagnetic interference shielding

2015-2018 Cotton Research and Development Corporation

358

Dr Nolene Byrne, A/Prof Joselito Razal, Prof Xungai Wang

Identifying technical benefits in producing regenerated cellulose fibres from cotton for carbon fibre production (phase II)

2017-2018 Cotton Research and Development Corporation

152

Dr Stuart Gordon, Dr Rangam Rajkhowa

An eco-friendly treatment to improve look and handle of cotton fabric

2016-2018 Cotton Research and Development Corporation

222

51

Industry and Other Funding

14

deakin.edu.au/ifm

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Industry and Other Funding - continued Dr Emma Prime, Prof David Solomon, A/Prof Jason Monty, Prof Alexander Babanin, Prof Greg Qiao

Development of next 2017-2018 Cotton Research and generation Development Corporation evaporation mitigation technology with increased resistance to wind

Prof Matthew Barnett, Dr Daniel Fabijanic, Mr Gourab Saha

A method for developing steels for wear resistance in ground engaging applications

2013-2019 Keech Australia Pty Ltd student project

Dr Minoo Naebe, Prof Bronwyn Fox

High barrier and strength polyethylene nanocomposites

2014-2018 Qenos

Dr Minoo Naebe

Nano-enhanced polyethylene based carbon fibre - Jarret Grout

2015-2019 Imagine Intelligent Materials Pty Ltd, Qenos

Dr Alessandra Sutti

Production of short fibres from melt and process modelling - Martina Di Venere

2016-2020 HeiQ Australia Pty Ltd

Dr Daniel Fabijanic

Towards the 2017-2018 Callidus Welding optimisation of a novel Solutions titanium surface modification process

49

Dr Rangam Rajkhowa, Prof Jagat Kanwar

Advanced wound healing protein powder

2017-2018 Australian Academy of Technology and Engineering - Global Connections Fund

49

Dr Nolene Byrne

Utilisation of textile waste towards new product development

2016-2018 Perkin Elmer

15

Dr Christopher Hurren, Dr Liz de Rome, Dr Xin Liu, Prof Tom Gibson

Trial phase testing for motorcycle protective clothing program

2017-2018 Transport for NSW

511

Prof Xungai Wang, Dr Christopher Hurren

Improvements in the dyeing of wool top to Superblack colours

2017-2019 Australian Wool Innovation 66 Scholarship

A/Prof Minoo Naebe

Hybrid composite 2017-2020 Defence Materials materials and structures Technology Centre

Dr Wren Greene

Lubricin Enabled Microfluidics

2018-2020 Lubris BioPharma

6

80

200

36

9

267 60

15

Grant Holders and their Projects - continued

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Industry and Other Funding - continued

16

Dr Christopher Hurren, Dr Liz de Rome, Dr Jin Zhang

Recycled plastic composite overlay to reduce serious injury crashes into wire rope barriers by motorcyclists

2017-2018 Transurban 100

Dr Wren Greene, Dr Xiaoen Wang

Plastic crystal assisted sintering of porous plastic

2017-2018 Thermopore Materials Corporation

12

Mr Vishal Pandya, Prof Tiffany Walsh

Investigation of membrane-mediated structures relevant to the Factor X-ase complex via molecular simulations

2017-2021 CSL Ltd

25

Dr Thomas Dorin

Understanding the precipitation kinetics of the nanometre size Al3(Sc,Zr) particles with core/shell structure

2017-2021 Clean Teq Scholarship

70

Dr Thomas Dorin

Developing the next generation of Al alloys for manufacturing electric bus chassis

2017-2019 Advanced Manufacturing Growth Centre Ltd

300

Prof Russell Varley

Development of an Improved Polymer Roller Shell

2017-2018 Conveyor Products and Solutions

46

Prof Matthew Barnett, A/Prof Daniel Fabijanic, Dr Hossein Beladi

MicrostructureProperty Relationship in Heat Treated Cold Drawn Rods

2018-2019 Liberty OneSteel Newcastle

40

A/Prof Minoo Naebe

The industrial application of graphene in highstrength polyethylene

2018-2021 Qenos

A/Prof Minoo Naebe

Soldier Protection System Concept Exploration Project No 7.64

2018-2019 Defence Materials Technology Centre

78

Dr Claudia Creighton, Dr Jane Zhang, A/Prof Luke Henderson, Prof Russell Varley

Self-Healing Materials for Enhanced Integrity and Reliability of Structures and Pipelines

2018-2021 Petronas Research

372

deakin.edu.au/ifm

600

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Industry and Other Funding - continued Prof Mike Tan, Mr Ivi Cicak

National Facility for Pipeline Coating Assesssment projects

Dr Rangam Rajkhowa, Prof Xungai Wang

2018

Industry projects

192

Unique acoustically optimised silk fibroin blended biomembranes for treatment of chronic middle ear diseases

2018-2019 Ear Science Institute Australia Incorporated

277

Prof Russell Varley, Dr Jin Zhang, Dr Christopher Hurren

High Sound Absorbing Composites from Recycled Cotton

2018-2019 CRDC Grant - Research Cotton Research and Development Corporation

75

Dr Xin Liu, Dr Naveeta Kumari

Potent Mould and Mildew Resistant Cotton Fabrics

2018-2019 CRDC Grant - Research Cotton Research and Development Corporation

160

Dr Rangam Rajkhowa

Application of aqueous glycine to improve quality and efficiency of cotton dyeing

2017-2019 CRDC Grant - Research Cotton Research and Development Corporation and Cotton Inc USA

74

Dr Fenghua She, Prof Lingxue Kong, Prof Frank Collins

Industrial exploitation of concrete structures reinforced with recycled carpet waste fibres

Dr Santiago Corujeira Gallo, A/Prof Daniel Fabijanic

The development of a 2018-2019 ITW Construction, hot dip galvanising Asia Pacific process for self-drilling building screws

Dr Christopher Hurren, Dr Liz de Rome, Dr Xin Liu

Purchasing, testing and rating for Motorcycle Clothing Assessment Project (Moto-CAP)

Dr Christopher Hurren

Knee brace evaluation

2018

POD Active Pty Ltd

Dr Rasike De Silva

Assessing The Remaining Service Lifetime Of PE Pipes: An Australian Case Study

2018

Ian Potter Foundation Travel

2

Dr Baptiste Rouxel

Impact of scandium addition on precipitation in an Al-4Cu alloy

2018

Ian Potter Foundation Travel

2

Dr Nima Haghdadi

In-process precipitation during 3D printing of high entropy alloys for advanced properties

2018

VESKI Victoria Fellowship

2018

G T Technologies Pty Ltd

2018-2021 Transport for NSW

20

80

1,972

16

10

17

Grant Holders and their Projects - continued

Team

Industry Partner / Funding Body

Total Awarded ($AU ,000)

Project Title

Years

Prof Russell Varley, Dr Jerry Gan, Dr Masihullah Jabarulla Khan

Next Generation Rebars using an Inorganic Glue for Carbon Fibre Reinforced Geopolymers

2018

Austeng

40

A/Prof Luke Henderson, Prof Russell Varley

Fire Proof Carbon Fibre for Building and Construction Applications

2018

Gale Pacific Limited

40

Prof Russell Varley, Dr Masihullah Jabarulla Khan, Dr Claudia Creighton

Achieving Advanced 2018-2019 Jeff Sykes & Associates, Processes for the Carbon Revolution Pty Ltd, Manufacturing of High Advanced Manufacturing Value Composites Growth Centre Ltd

A/Prof Minoo Naebe

Morphology investigation of graphene samples

Dr Christopher Hurren, Dr Jinfeng Wang, Prof Xungai Wang

Reducing COD from wastewater with a reusable photocatalyst

2018

Barwon Water

Dr Jinfeng Wang, Dr Bin Tang

Recovering grease from scouring wastewater

2018

Cavalier Woolscourers Ltd

3

Dr Jinfeng Wang, Dr Bin Tang

Recovering grease from scouring wastewater (Stage II)

2018

Cavalier Woolscourers Ltd

14

Prof Frank Collins, Dr Will Gates

Sydney Opera House Durability Assessment

2018-2019 Sydney Opera House Trust

53

A/Prof Daniel Fabijanic, Dr Santiago Corujeira Gallo, Prof Matthew Barnett

Improving the performance of high manganese steels used in rock crushing applications

2018-2019 HE Parts International

12

Industry and Other Funding - continued

18

deakin.edu.au/ifm

480

2018-2020 Graphene Manufacturing 17 Australia 15

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ( ,000)

International Funding Prof Qipeng Guo

Nanotoughened Benzoxazine Resins and High Performance Composites

2015-2019 Sichuan SZD New Materials Co. Ltd

250AUD

Prof Tong Lin

Industrial scale nanofibre production system

2015-2020 Yuntong Nanomaterials Technology Co. Ltd

500AUD

A/Prof Bernard Rolfe, Dr Matthias Weiss

Low volume production of longitudinal components by combining flexible roll forming and free forming

2016-2018 Ford USA

150USD

Dr Ilana Timokhina, Prof Lingxue Kong, Dr Hossein Beladi, Prof Peter Hodgson

Cluster strengthened steels

2016-2018 Wuhan Iron and Steel (Group) Corporation

1369CNY

Dr Matthias Weiss, A/Prof Bernard Rolfe, Prof Lingxue Kong, Prof Peter Hodgson

Flexible roll forming of WISCO high strength steels

2016-2018 Wuhan Iron and Steel (Group) Corporation

1076CNY

Prof Tiffany Walsh

Integration of experiment 2016-2018 Air Force Office of and modelling to advance Scientific Research biosensor design based on conformational switching of surface-adsorbed nucleic acids

100USD

A/Prof Rimma Lapovok

Shear induced solid-state joining of dissimilar titanium alloys

2016-2018 US Air Force Office of Scientific Research

109USD

A/Prof Minoo Naebe

Development of a cost model for production of carbon fibre

2017-2020 Ford USA

150USD

A/Prof Minoo Naebe

Chemicals assisted stablization of PAN precursor for production of low cost carbon fibre for automotive application

2018-2020 Ford USA Grant - Research

A/Prof Luke Henderson

Investigations into surface 2018-2021 Cytec USA modification of carbon fiber for fundamental insights into interfacial phenomena

189AUD

A/Prof Luke Henderson

Developing Carbon Fibers for Ring Opening Metathesis Polymerisation

2018-2019 US Army International Technology Centre Pacific

100AUD

A/Prof Luke Henderson

Surface modification and application of recycled carbon fibers in composite materials

2018-2022 ELG Carbon Fibre Ltd

140AUD

35AUD

19

Grant Holders and their Projects - continued

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ( ,000)

International Funding - continued

20

Dr Haitao Niu, Dr Hua Zhou, Dr Hongxia Wang, Prof Tong Lin

Preparation of Directional Wicking Fabrics using a Ultra-spray Method

Prof Peter Hodgson, Prof Lingxue Kong, Dr Ilana Timokhina

Study of solutes redistribution in high strength steels using atom probe tomography

2018

Wuhan University of Science and Technology

10AUD

Prof Patrick Howlett, Prof Maria Forsyth

Research of all-solid-state batteries using plastic crystals as solid electrolytes

2018

Toyota Motor Engineering & Manufactruring North America, Inc

85AUD

Prof Lingxue Kong, Dr Ludovic DumĂŠe, Dr Fenghua She, Dr Zhifeng Yi

Improvement on quality of reflecting coating on car lamp reflector

2017-2018 Seeyao Electronics Co. Ltd

200AUD

Mr Xi Lu, Dr Jinfeng Wang, Prof Xungai Wang, Dr Jing Wang

Modifying photocatalyst on porous support for odour treatment application

2016-2019 Jiangsu BOHN Environmental Protection Science and Tech Company

45AUD

Prof Xungai Wang, Dr Christopher Hurren, Dr Rangam Rajkhowa, Dr Joselito Razal,

Fibre deconstruction 2016-2018 Lincoln Agritech Ltd polymer addition material reassembly and applications

Prof Xungai Wang, Dr Rangam Rajkhowa

Protein Fibre Powder Technology

2018-2019 Lincoln Agritech Ltd

80AUD

Prof Jeong Yoon

Generic Project with LG Electronics in the ICIM

2016-2019 LG Electronics

50USD

Prof Jeong Yoon

Membership fee for GM participation in the ICM

2015-2018 General Motors Holdings LLC

150USD

Prof Jeong Yoon

Generic project in the ICIM

2015-2018 POSCO

150USD

Prof Jeong Yoon

Generic Project with SungWoo HiTech (Tier-2) in the ICIM

2015-2018 Sungwoo Hitech

A/Prof Luke Henderson, Prof Tiffany Walsh, Prof Russell Varley

Optimization of Carbon Fiber Surfaces for Advanced Composites

2017-2020 Office of Naval Research, USA

449USD

Prof Xungai Wang, Dr Rangam Rajkhowa, Dr Rebecca Van Amber, Dr Nolene Byrne, Dr Christopher Hurren

Circular Denim

2017-2018 H&M Foundation

150EUR

deakin.edu.au/ifm

2018-2019 Shanghai AR New Materials Technology Ltd

100AUD

675NZD

60USD

Team

Project Title

Years

Industry Partner / Funding Body

Total Awarded ( ,000)

International Funding - continued A/Prof Patrick Howlett, Dr Xiaoen Wang, Dr George Greene

Design of high ion conductivity in polymer/ OIPC composite through understanding the effect of chemistry on structure and ion dynamics at polymer/ OIPC interfaces

2017-2018 US Army Research Office

Dr Luca Porcarelli

EU project 797295 - eJUMP 2019-2021 European CommissionMarie Curie Actions Fellowships

30USD

Dr Claudia Creighton, Dr Peter Lynch

Next generation fibers 2018-2019 The Boeing Company program: Carbon Fiber X-ray - USA Scattering Analysis

68AUD

Dr Maryam Naebe, Dr Rechana Remadevi

A novel biodegradable low cost wool based conductive textile

2018-2020 Ford USA Grant - Research

199AUD

Dr Maryam Naebe, Dr Charanpreet Singh

A natural cost-effective alternative to synthetic textiles for future automotive interior usage

2018-2019 Ford USA Grant - Research

19AUD

Dr Sulley Li, A/Prof Minoo Naebe

Development of Durable Carbon Fibre Composites for Prosthetic Fee

2018-2019 Hebei Guanchengyuexing Technology Co Ltd

100AUD

A/Prof Minoo Naebe

Low-cost sustainable lignin-based precursor fibre for the production of automotive grade carbon fibre

2018-2020 Ford USA Grant - Research

166AUD

Dr Maryam Naebe, Mr Md Abdullah Al Faruque

Bio-colouration of regenerated fibres

2018-2020 Lincoln Agritech Ltd

Prof Marc R Knecht, Prof Tiffany Walsh

Peptide-driven exfoliation and organization of multi-compositional 2D nanomaterials

2018-2019 Air Force Office of Scientific Research United States of America

Dr Chi Huynh, Prof Lingxue Kong, Dr Raquel Ovalle, Dr Ludovic DumĂŠe

Investigation of 2018-2021 Lintec of America, Inc. nanocomposite membranes for liquid separation from spinnable carbon nanotube forests

Dr Sulley Li, A/Prof Minoo Naebe, Dr Weiwei Lei

Research and Development of Charged Multifunctional Composite Filter Material

2018-2021 Xiamen FilterTech Industrial Corporation

96USD

15AUD 1,130AUD

59AUD

151AUD

21

PUBLICATIONS 23

Books

23

Book Chapters

23 Journal Articles 45 Conference Papers

375 JOURNAL ARTICLES PUBLISHED 22

deakin.edu.au/ifm

Books

Journal Articles

1.

Guo Q; Thermosets: Structure, Properties, and Applications; Second Edition, Elsevier 2018.

1.

2.

Lin T (Editor); Novel Aspects of Nanofibers, In-Tech Open, 2018.

Abdikheibari, S; Lei, W; Dumée, L; Milne, N; Baskaran, K (2018), Thin film nanocomposite nanofiltration membranes from amine functionalized-boron nitride/polypiperazine amide with enhanced flux and fouling resistance, Journal of materials chemistry a, Vol. 6, NO. 25, PP. 1206612081, Royal Society of Chemistry.

2.

Abolhasani, M; Shirvanimoghaddam, K; Khayyam, H; Moosavi, S; Zohdi, N; Naebe, M (2018), Towards predicting the piezoelectricity and physiochemical properties of the electrospun P(VDF-TrFE) nanogenrators using an artificial neural network, Polymer Testing, Vol. 66, PP. 178-188, Elsevier.

3.

Acevedo, K; Hayne, D; McInnes, L; Noor, A; Duncan, C; Moujalled, D; Volitakis, I; Rigopoulos, A; Barnham, K; Villemagne, V; White, A; Donnelly, P (2018), Effect of structural modifications to Glyoxal-bis(thiosemicarbazonato) copper(II) complexes on cellular copper uptake, copper-mediated ATP7A trafficking, and P-Glycoprotein mediated efflux, Journal of medicinal chemistry, Vol. 61, NO. 3, PP. 711-723, American Chemical Society.

4.

Acikel, A; Gates, W; Singh, R; Bouazza, A; Fredlund, D; Rowe, R (2018), Time-dependent unsaturated behaviour of geosynthetic clay liners, Canadian geotechnical journal, Vol. 55, NO. 12, PP. 1824-1836, NRC Research Press (National Research Council Canada).

5.

Acikel, A; Gates, W; Singh, R; Bouazza, A; Rowe, R (2018), Insufficient initial hydration of GCLs from some subgrades: factors and causes, Geotextiles and geomembranes, Vol. 46, NO. 6, PP. 770-781, Elsevier.

6.

Adineh, V; Zheng, C; Zhang, Q; Marceau, R; Liu, B; Chen, Y; Si, K; Weyland, M; Velkov, T; Cheng, W; Li, J; Fu, J (2018), Graphene-enhanced 3D chemical mapping of biological specimens at near-atomic resolution, Advanced functional materials, Vol. 28, NO. 32, Wiley.

7.

Al-Attabi, R; Dumée, L; Kong, L; Schütz, J; Morsi, Y (2018), High efficiency poly(acrylonitrile) electrospun nanofiber membranes for airborne nanomaterials filtration, Advanced engineering materials, Vol. 20, NO. 1, PP. 1-10, John Wiley & Sons.

Book Chapters 1.

Al-Attabi R, Morsi YS, Schütz JA, Dumée LF (2018) Electrospun membranes for airborne contaminants capture. In ‘Handbook of Nanofibers’. Springer.

2.

Dorin T, Ramajayam M, Vahid A, Langan T. (2018) Aluminium Scandium alloys. In ‘Fundamentals of Aluminium Metallurgy Recent Advances’ 439-494.

Woodhead Publishing Ltd.

3.

Dorin T, Vahid A, Lamb J. (2018) Aluminium Lithium alloys. In ‘Fundamentals of Aluminium Metallurgy Recent Advances’ 387-438. Woodhead Publishing Ltd.

4.

Li, J; Zhang, Z; Liu, X (2018) Effects of kinetics on structures of aggregates leading to fibrillar networks, in Weiss R, ‘Molecular gels: structure and dynamics’, 88-128, Royal Society of Chemistry.

5.

Marceau R, Dorin T (2018). New Research Techniques in Aluminium Alloy Development. In ‘Fundamentals of Aluminium Metallurgy Recent Advances’ 1-46. Woodhead Publishing.

6.

O'Dell LA (2018). Ultra-wideline solid-state NMR: Developments and applications of the WCPMG experiment. In ‘Modern Magnetic Resonance’ 1161-1182.

7.

O'Dell, L (2018), 14N solid-state NMR, in Hodgkinson P, Modern methods in solid-state NMR: a practitioner's guide, PP. 134-159, Royal Society of Chemistry.

8.

Pakdel, E; Fang, J; Sun, L; Wang, X (2018), Nanocoatings for smart textiles, in Yilmaz ND, Smart textiles: wearable nanotechnology, PP. 247-247, Scrivener Publishing.

9.

Zhou J, Tang B. (2018). In situ localized surface plasmon resonance spectroscopy for gold and silver nanoparticles. In ‘In-situ Characterization Techniques for Nanomaterials’ 107-157.

10. Zhou Y, Fang J, Zhao Y, Lin T. (2018). Fibre-shaped Electronic Devices. In ‘Handbook of Fibrous Materials’, Edition 2, Wiley, (edited by J L Hu).

23

Publications - continued 8.

Al-Attabi, R; Dumée, L; Schütz, J; Morsi, Y (2018), Pore engineering towards highly efficient electrospun nanofibrous membranes for aerosol particle removal, Science of the total environment, Vol. 625, PP. 706-715, Elsevier.

9.

Ali, U; Niu, H; Khurshid, M; Abbas, A; Lin, T (2018), Electrospinning behavior of needleless spinneret with a popular mace shape, Journal of the textile institute, PP. 1-9, Taylor & Francis.

10. Allioux, F; Balme, S; Dumée, L (2018), Smart electrically responsive hybrid ion-selective membranes for selective gated transport of ionic species, Materials horizons, Vol. 5, NO. 6, PP. 1185-1193, Royal Society of Chemistry.

11. Allioux, F; David, O; Merenda, A; Maina, J; Benavides, M; Tanaka, A; Dumée, L (2018), Catalytic nickel and nickel-copper alloy hollowfiber membranes for the remediation of organic pollutants by electrocatalysis, Journal of materials chemistry A, Vol. 6, NO. 16, PP. 6904-6915, Royal Society of Chemistry.

12. Allioux, F; Kapruwan, P; Milne, N; Kong, L; Fattaccioli, J; Chen, Y; Dumée, L (2018), Electro-capture of heavy metal ions with carbon cloth integrated microfluidic devices, Separation and purification technology, Vol. 194, PP. 26-32, Elsevier.

13. Al-Masri, D; Dupont, M; Yunis, R; MacFarlane, D; Pringle, J (2018), The electrochemistry and performance of cobalt-based redox couples for thermoelectrochemical cells, Electrochimica acta, Vol. 269, PP. 714-723, Elsevier.

14. Al-Masri, D; Yunis, R; Hollenkamp, A; Pringle, J (2018), A symmetrical ionic liquid/Li salt system for rapid ion transport and stable lithium electrochemistry, Chemical communications, Vol. 54, NO. 29, PP. 3660-3663, Royal Society of Chemistry.

15. Ambujakshan, A; Pringle, J; Chen, Z; Corr, C; du Plessis, J; Hodgson, P; Dai, X (2018), An environmentally friendly in situ plasma and anodization method to produce titanium dioxide nanotubes, Plasma processes and polymers, Vol. 15, NO. 1, Wiley.

16. Arnold, C; Beggs, K; Eyckens, D; Stojcevski, F; Servinis, L; Henderson, L (2018), Enhancing interfacial shear strength via surface grafting of carbon fibers using the Kolbe decarboxylation reaction, Composites science and technology, Vol. 159, PP. 135-141, Elsevier.

17. Askari-Paykani, M; Shahverdi, H; Miresmaeili, R; Beladi, H (2018), Second-phase hardening and rule of mixture, microbands and dislocation hardening in Fe67.4−xCr15.5Ni14.1Si3.0Bx (x = 0, 2) alloy systems, Materials science and engineering: A, Vol. 715, PP. 214-225, Elsevier.

18. Awad, N; Niu, H; Ali, U; Morsi, Y; Lin, T (2018), Electrospun fibrous scaffolds for small-diameter blood vessels: a review, Membranes, Vol. 8, NO. 1, MDPI. 19. Aye, S; Li, R; Boyd-Moss, M; Long, B; Pavuluri, S; Bruggeman, K; Wang, Y; Barrow, C; Nisbet, D; Williams, R (2018), Scaffolds formed via the non-equilibrium supramolecular assembly of the synergistic ECM peptides RGD and PHSRN demonstrate improved cell attachment in 3D, Polymers, Vol. 10, NO. 7, PP. 1-13, MDPI. 20. Badii K, Golkarnarenji G, Milani AS, Naebe M, Khayyam H (2018), A comprehensive chemical model for the preliminary steps of the thermal stabilization process in a carbon fibre manufacturing line. Reaction Chemistry and Engineering, PP. 959-971.

21. Badr, O; Rolfe, B; Weiss, M (2018), Effect of the forming method on part shape quality in cold roll forming high strength Ti-6Al-4V sheet, Journal of manufacturing processes, Vol. 32, PP. 513-521, Elsevier.

22. Bapat, A; Erck, R; Seymour, B; Zhao, B; Cosimbescu, L (2018), Lipophilic polymethacrylate ionic liquids as lubricant additives, European Polymer Journal, Vol. 108, PP. 38-47, Elsevier.

23. Basile, A; Ferdousi, S; Makhlooghiazad, F; Yunis, R; Hilder, M; Forsyth, M; Howlett, P (2018), Beneficial effect of added water on sodium metal cycling in super concentrated ionic liquid sodium electrolytes, Journal of power sources, Vol. 379, PP. 344-349, Elsevier.

24. Basile, A; Hilder, M; Makhlooghiazad, F; PozoGonzalo, C; MacFarlane, D; Howlett, P; Forsyth, M (2018), Ionic liquids and organic plastic crystals: advanced electrolytes for safer high performance sodium energy storage technologies, Advanced energy materials, Vol. 8, NO. 17, PP. 1-20, Wiley.

24

deakin.edu.au/ifm

25. Beggs, K; Randall, J; Servinis, L; Krajewski, A; Denning, R; Henderson, L (2018), Increasing the resistivity and IFSS of unsized carbon fibre by covalent surface modification, Reactive and functional polymers, Vol. 129, PP. 123-128, Elsevier.

26. Berrenberg, F; Wang, J; Timokhina, I; Haase, C; Lapovok, R; Molodov, D (2018), Influence of rolling asymmetry on the microstructure, texture and mechanical behavior of high-manganese twinninginduced plasticity steel, Materials science and engineering a, Vol. 709, PP. 172-180, Elsevier.

27. Bisht, A; Kumar, V; Li, L; Chen, Y; Agarwal, A; Lahiri, D (2018), Effect of warm rolling and annealing on the mechanical properties of aluminum composite reinforced with boron nitride nanotubes, Materials science and engineering: A, Vol. 710, PP. 366-373, Elsevier.

28. Biswas S, Williams K, Jones M (2018) Development of a constitutive model for erosion based on dissipated particle energy to predict the wear rate of ductile metals. Wear, PP. 166-175, Vol. 404-405, Elsevier.

29. Bruder, E; Braun, P; Rehman, H; Marceau, R; Taylor, A; Pippan, R; Durst, K (2018), Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys, Scripta materialia, Vol. 144, PP. 5-8, Elsevier.

30. Bruder, E; Gangaraju, C; Lapovok, R (2018), Influence of equal channel angular pressing on high cycle fatigue behavior of ultrafine-grained iron: role of anisotropy, Materials science and engineering A, Vol. 711, PP. 650-658, Elsevier.

31. Byrne, N; De Silva, R; Hilditch, T; Lenghaus, K (2018), Identifying mechanically induced chemical changes to vintage grade high density polyethylene pipes during squeeze-off, Polymer testing, Vol. 65, PP. 242-248, Elsevier.

32. Byrne, N; De Silva, R; Ma, Y; Sixta, H; Hummel, M (2018), Enhanced stabilization of cellulose-lignin hybrid filaments for carbon fiber production, Cellulose, Vol. 25, NO. 1, PP. 723-733, Springer.

33. Cai, G; Yang, M; Pan, J; Cheng, D; Xia, Z; Wang, X; Tang, B (2018), Large-scale production of highly stretchable CNT/Cotton/Spandex composite yarn for wearable applications, ACS Applied Materials and Interfaces, Vol. 10, NO. 38, PP. 32726-32735, American Chemical Society.

34. Cai, Z; Shen, L; Wang, X; Guo, Q (2018), Fabrication of a bulk superhydrophobic conductive material by mechanical abrasion, Composites science and technology, Vol. 164, PP. 238-247, Elsevier.

35. Chan, J; Zhang, H; Nolvachai, Y; Hu, Y; Zhu, H; Forsyth, M; Gu, Q; Hoke, D; Zhang, X; Marriot, P; Wang, H (2018), Incorporation of homochirality into a zeolitic imidazolate framework membrane for efficient chiral separation, Angewandte chemie international edition, Vol. 57, NO. 52, PP. 17130-17134, Wiley.

36. Chandrasekharan Nair Remadevi, R; Rajkhowa, R; Crowle, G; Wang, X; Zhu, H; Gordon, S (2018), Effect of aqueous glycine treatment on the fine structure and dyeing ability of cotton, Carbohydrate polymers, Vol. 202, PP. 365-371, Elsevier.

37. Chang, H; Li, D; Cao, T; Li, Q; Bu, Z; Zhao, W; Lin, T (2018), Solvent-free ring-opening polymerization of cyclohexene oxide catalyzed by palladium chloride, Polymers for advanced technologies, Vol. 29, NO. 6, PP. 1870-1874, John Wiley & Sons.

38. Chang, H; Li, Q; Cui, X; Wang, H; Bu, Z; Qiao, C; Lin, T (2018), Conversion of carbon dioxide into cyclic carbonates using wool powder-KI as catalyst, Journal of CO2 utilization, Vol. 24, PP. 174-179, Elsevier.

39. Chang, H; Li, Q; Cui, X; Wang, H; Qiao, C; Bu, Z; Lin, T (2018), Polyvinyl alcohol-potassium iodide: an efficient binary catalyst for cycloaddition of epoxides with CO2, Molecular catalysis, Vol. 449, PP. 25-30, Elsevier.

40. Chang, Y; Li, Y; Song, J; Zhao, M; Guo, J; An, Q; Gong, Y; Guo, Q (2018), Formaldehyde controlling the synthesis of multishelled SiO2/Fe xO y hollow porous spheres, Langmuir, Vol. 34, NO. 28, PP. 8223-8229, ACS Publications.

41. Chen, C; Liu, D; Wang, J; Wang, L; Sun, J; Lei, W (2018), Functionalized boron nitride membranes with multipurpose and super-stable semipermeability in solvents, Journal of materials chemistry A, Vol. 6, NO. 42, PP. 21104-21109, Royal Society of Chemistry.

42. Chen, C; Lv, B; Feng, X; Zhang, F; Beladi, H (2018), Strain hardening and nanocrystallization behaviors in Hadfield steel subjected to surface severe plastic deformation, Materials science and engineering: A, Vol. 729, PP. 178-184, Elsevier.

25

Publications - continued 43. Chen, C; Wang, J; Liu, D; Yang, C; Liu, Y; Ruoff, R; Lei, W (2018), Functionalized boron nitride membranes with ultrafast solvent transport performance for molecular separation, Nature communications, Vol. 9, NO. 1, Nature Publishing Group.

44. Chen, F; Howlett, P; Forsyth, M (2018), Na-ion solvation and high transference number in superconcentrated ionic liquid electrolytes: a theoretical approach, Journal of physical chemistry C, Vol. 122, NO. 1, PP. 105-114, ACS Publications.

45. Chen, F; Kerr, R; Forsyth, M (2018), Cation effect on small phosphonium based ionic liquid electrolytes with high concentrations of lithium salt, Journal of chemical physics, Vol. 148, NO. 19, PP. 1-9, AIP Publishing.

46. Chen, J-Y; Kadam, G; Gupta, A; Anuradha; Bhosale, S; Zheng, F; Zhou, C-H; Jia, B-H; Dalal, D; Li, J-L (2018), A biomimetic supramolecular approach for charge transfer between donor and acceptor chromophores with aggregation-induced emission, Chemistry: a European journal, Vol. 24, NO. 55, PP. 14668-14678, John Wiley & Sons.

47. Chen, J-Y; Komeily-Nia, Z; Fan, L-P; Li, Z-Y; Yuan, B; Tang, B; Li, J-L (2018), Manipulating the fractal fiber network of a molecular gel with surfactants, Journal of colloid and interface science, Vol. 526, PP. 356-365, Elsevier.

48. Chen, L; She, X; Wang, T; Shigdar, S; Duan, W; Kong, L (2018), Mesoporous silica nanorods toward efficient loading and intracellular delivery of siRNA, Journal of nanoparticle research, Vol. 20, PP. 1-13, Springer.

49. Chen, X; Forsyth, M; Chen, F (2018), Molecular dynamics study of ammonium based co-cation plasticizer effect on lithium ion dynamics in ionomer electrolytes, Solid state ionics, Vol. 316, PP. 47-52, Elsevier.

50. Chen, X; Porto, C; Chen, Z; Merenda, A; Allioux, F-M; d'Agostino, R; Magniez, K; Dai, X; Palumbo, F; Dumée, L (2018), Single step synthesis of Janus nano-composite membranes by atmospheric aerosol plasma polymerization for solvents separation, Science of the total environment, Vol. 645, PP. 22-33, Elsevier.

51. Chen, Z; Magniez, K; Duchemin, M; Stanford, N; Ambujakshan, A; Taylor, A; Wong, C; Zhao, Y; Dai, X (2018), Rapid formation of diamond-like nano-carbons in a gas bubble discharge in liquid ethanol, Plasma chemistry and plasma processing, Vol. 38, NO. 1, PP. 75-87, Springer.

26

deakin.edu.au/ifm

52. Chiu LNS, Rolfe B, Wu X, Yan W (2018), Effect of stiffness anisotropy on topology optimisation of additively manufactured structures. Engineering Structures, PP. 842-848, Pergamon Press.

53. Coglitore, D; Merenda, A; Giamblanco, N; Dumée, L; Janot, J-M; Balme, S (2018), Metal alloy solid-state nanopores for single nanoparticle detection, Physical chemistry chemical physics, Vol. 20, NO. 18, PP. 12799-12807, Royal Society of Chemistry.

54. Cong W, Gao W, Garvey C, Dumée L, Zhang J, Kent B, Wang G, She F, Kong L (2018), In Situ SAXS Measurement and Molecular Dynamics Simulation of Magnetic Alignment of Hexagonal LLC Nanostructures. Membranes, Vol. 8.

55. Corujeira Gallo, S; Li, X; Zhang, Z; Charitidis, C; Dong, H (2018), Viscoelastic response of carbon fibre reinforced polymer during push-out tests, Composites part A: applied science and manufacturing, Vol. 112, PP. 178-185, Elsevier.

56. Coward, A; Mays, C; Patti, A; Stilwell, J; O'Dell, L; Viegas, P (2018), Taphonomy and chemotaxonomy of Eocene amber from southeastern Australia, Organic geochemistry, Vol. 118, PP. 103-115, Elsevier.

57. Da Sun, S; Fabijanic, D; Barr, C; Liu, Q; Walker, K; Matthews, N; Orchowski, N; Easton, M; Brandt, M (2018), In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates, Surface and coatings technology, Vol. 333, PP. 210-219, Elsevier.

58. Davaajav, N; Liu, X; Sukigara, S (2018), Compression and surface properties of Mongolian cashmere tops related to tactile characterization, Textile research journal, PP. 1-11, SAGE Publications.

59. de Rome, L; Brown, J; Baldock, M; Fitzharris, M (2018), Near-miss crashes and other predictors of motorcycle crashes: findings from a populationbased survey, Traffic injury prevention, Vol. 19, NO. sup2, PP. S20-S26, Taylor & Francis.

60. De Silva, R; Hilditch, T; Byrne, N (2018), Assessing the integrity of in service polyethylene pipes, Polymer testing, Vol. 67, PP. 228-233, Elsevier.

61. Deb, S; Panigrahi, S; Weiss, M (2018), Development of bulk ultrafine grained Al-SiC nano composite sheets by a SPD based hybrid process: experimental and theoretical studies, Materials science and engineering A, Vol. 738, PP. 323-334, Elsevier.

62. Demir, B; Beggs, K; Fox, B; Servinis, L; Henderson, L; Walsh, T (2018), A predictive model of interfacial interactions between functionalised carbon fibre surfaces cross-linked with epoxy resin, Composites science and technology, Vol. 159, PP. 127-134, Elsevier.

63. Deng, N; Ju, J; Yan, J; Zhou, X; Qin, Q; Zhang, K; Liang, Y; Li, Q; Kang, W; Cheng, B (2018), CeF3-doped porous carbon nanofibers as sulfur immobilizers in cathode material for highperformance lithium-sulfur batteries, ACS applied materials and interfaces, Vol. 10, NO. 15, PP. 12626-12638, American Chemical Society.

64. Deole, A; Barnett, M; Weiss, M (2018), Analysis of fracture in sheet bending and roll forming, European Scientific Association for Material Forming. Conference (2018 : Palermo, Italy), PP. 1-6, ESAFORM. 65. Deole, A; Barnett, M; Weiss, M (2018), The numerical prediction of ductile fracture of martensitic steel in roll forming, International journal of solids and structures, Vol. 144-145, PP. 20-31, Elsevier.

66. des Ligneris E, DumĂŠe LF, Kong L (2018) Nanofiberbased materials for persistent organic pollutants in water remediation by adsorption, Applied Sciences, Vol. 8.

67. Dhara, S; Marceau, R; Wood, K; Dorin, T; Timokhina, I; Hodgson, P (2018), Precipitation and clustering in a Ti-Mo steel investigated using atom probe tomography and small-angle neutron scattering, Materials Science and Engineering: A, Vol. 718, PP. 74-86, Elsevier B.V. 68. Dhara, S; Marceau, R; Wood, K; Dorin, T; Timokhina, I; Hodgson, P (2018), Atom probe tomography data analysis procedure for precipitate and cluster identification in a Ti-Mo steel, Data brief, Vol. 18, PP. 968-982, Elsevier.

69. dos Santos, E; Gates, W; Michels, L; Juranyi, F; Mikkelsen, A; da Silva, G; Fossum, J; Bordallo, H (2018), The pH influence on the intercalation of the bioactive agent ciprofloxacin in fluorohectorite, Applied Clay Science, Vol. 166, PP. 288-298, Elsevier.

70. Du, Q; Su, L; Hou, L; Sun, G; Feng, M; Yin, X; Ma, Z; Shao, G; Gao, W (2018), Rationally designed ultrathin Ni-Al layered double hydroxide and graphene heterostructure for high-performance asymmetric supercapacitor, Journal of alloys and compounds, Vol. 740, PP. 1051-1059, Elsevier.

71. Engstrom, J; Aramballi, J; Parhizkar, M; Sutti, A; Hawes, C; White, J; Gunnlaugsson, T; Pfeffer, F (2018), Norbornene chaotropic salts as low molecular mass ionic organogelators (LMIOGs), Chemical science, Vol. 9, NO. 23, PP. 5233-5241, Royal Society of Chemistry.

72. Eyckens, D; Servinis, L; Scheffler, C; Wolfel, E; Demir, B; Walsh, T; Henderson, L (2018), Synergistic interfacial effects of ionic liquids as sizing agents and surface modified carbon fibers, Journal of materials chemistry A, Vol. 6, NO. 10, PP. 4504-4514, Royal Society of Chemistry.

73. Eyckens, D; Stojcevski, F; Hendlmeier, A; Arnold, C; Randall, J; Perus, M; Servinis, L; Gengenbach, T; Demir, B; Walsh, T; Henderson, L (2018), An efficient high-throughput grafting procedure for enhancing carbon fiber-to-matrix interactions in composites, Chemical engineering journal, Vol. 353, PP. 373-380, Elsevier.

74. Fakhrhoseini, S; Khayyam, H; Naebe, M (2018), Chemically enhanced wet-spinning process to accelerate thermal stabilization of polyacrylonitrile fibers, Macromolecular materials and engineering, Vol. 303, NO. 8, PP. 1-8, John Wiley & Sons.

75. Fan, L; Li, J; Cai, Z; Wang, X (2018), Creating biomimetic anisotropic architectures with co-aligned nanofibers and macrochannels by manipulating ice crystallization, ACS nano, Vol. 12, NO. 6, PP. 5780-5790, American Chemical Society.

76. Fan, Y; Zhou, J; Zhang, J; Lou, Y; Huang, Z; Ye, Y; Jia, L; Tang, B (2018), Photocatalysis and self-cleaning from g-C3N4 coated cotton fabrics under sunlight irradiation, Chemical physics letters, Vol. 699, PP. 146-154, Elsevier.

77. Farabi, E; Hodgson, P; Rohrer, G; Beladi, H (2018), Five-parameter intervariant boundary characterization of martensite in commercially pure titanium, Acta materialia, Vol. 154, PP. 147-160, Elsevier.

78. Farajikhah, S; Van Amber, R; Sayyar, S; Shafei, S; Fay, C; Beirne, S; Javadi, M; Wang, X; Innis, P; Paull, B; Wallace, G (2018), Processable thermally conductive polyurethane composite fibers, Macromolecular materials and engineering, Vol. 304, NO. 3, PP. 1-7, John Wiley & Sons.

27

Publications - continued 79. Fehervari A, Gates W, Liu Y, Bouazza A, Marchuk A, Marchuk S, Turney T, Patti A (2018) Colloidal Aspects of Incompatibility Reactions of Bentonite with Saline Leachates as Indicated from a Modified Fluid Loss Test, Canadian Geotechnical Journal.

80. Feng, C; Yi, Z; Dumée, L; She, F; Peng, Z; Gao, W; Kong, L (2018) Tuning micro-wrinkled graphene films for stretchable conductors of controllable electrical conductivity, Carbon, Vol. 139, PP. 672-679, Elsevier.

81. Flynn, K; Sutti, A; Martin, L; Leigh Ackland, M; Torriero, A (2018), Critical effects of polar fluorescent probes on the interaction of DHA with POPC supported lipid bilayers, Biochimica et biophysica acta (BBA) - biomembranes, Vol. 1860, NO. 5, PP. 1135-1142, Elsevier.

82. Forsyth, M (2018), Controlling corrosion with chemistry, Corrosion and materials, Vol. 43, NO. 1, PP. 66-71, Australasian Corrosion Association.

83. Fu, C; Li, Q; Lu, J; Mateti, S; Cai, Q; Zeng, X; Du, G; Sun, R; Chen, Y; Xu, J; Wong, C (2018), Improving thermal conductivity of polymer composites by reducing interfacial thermal resistance between boron nitride nanotubes, Composites science and technology, Vol. 165, PP. 322-330, Elsevier.

84. Fu, S; Zhou, H; Wang, H; Ding, J; Liu, S; Zhao, Y; Niu, H; Rutledge, G; Lin, T (2018), Magnet-responsive, superhydrophobic fabrics from waterborne, fluoride-free coatings, RSC advances, Vol. 8, NO. 2, PP. 717-723, Royal Society of Chemistry.

85. Gao, Y; Zhang, T; Guo, Q; Gao, L (2018), Enhanced photodecomposition of methylene blue in water with Sr1−xKxTiO3−δ@PC-polyHIPEs under UV and visible light, Journal of chemistry, Vol. 2018, Hindawi Publishing Corporation.

86. Gatea, A; Kouzani, A; Kaynak, A; Khoo, S; Norton, M; Gates, W (2018), Soil bulk density estimation methods: a review, Pedosphere, Vol. 28, NO. 4, PP. 581-596, Elsevier.

87. Gates, W; Dumadah, G; Bouazza, A (2018), Micro X-ray visualisation of the interaction of geosynthetic clay liner components after partial hydration, Geotextiles and geomembranes, Vol. 46, NO. 6, PP. 739-747, Elsevier.

88. Ge, Y; Pozo-Gonzalo, C; Zhao, Y; Jia, X; Kerr, R; Wang, C; Howlett, P; Wallace, G (2018), Towards thermally stable high performance lithium-ion batteries: the combination of a phosphonium cation ionic liquid and a 3D porous molybdenum disulfide/graphene electrode, Chemical communications, NO. 42, PP. 5338-5341, Royal Society of Chemistry.

28

deakin.edu.au/ifm

89. Ghaderi, A; Saha, G; Guo, T; Fabijanic, D; Barnett, M (2018), Material wear map for ground-engaging steels based on scratch tests, Wear, Vol. 404-405, PP. 153-165, Elsevier.

90. Ghasali E, Shirvanimoghaddam K, Alizadeh M, Ebadzadeh T (2018), Ultra-low temperature fabrication of vanadium carbide reinforced aluminum nano composite through spark plasma sintering, Journal of Alloys and Compounds, Vol. 753, PP. 433-445, Elsevier.

91. Girard, G; Hilder, M; Dupre, N; Guyomard, D; Nucciarone, D; Whitbread, K; Zavorine, S; Moser, M; Forsyth, M; MacFarlane, D; Howlett, P (2018), Spectroscopic characterization of the SEI layer formed on lithium metal electrodes in phosphonium bis(fluorosulfonyl)imide ionic liquid electrolytes, ACS applied materials and interfaces, Vol. 10, NO. 7, PP. 6719-6729, American Chemical Society.

92. Golkarnarenji, G; Naebe, M; Badii, K; Milani, A; Jazar, R; Khayyam, H (2018), Support vector regression modelling and optimization of energy consumption in carbon fiber production line, Computers and chemical engineering, Vol. 109, PP. 276-288, Elsevier.

93. Golkarnarenji, G; Naebe, M; Badii, K; Milani, A; Jazar, R; Khayyam, H (2018), Production of low cost carbon-fiber through energy optimization of stabilization process, Materials, Vol. 11, NO. 3, MDPI. 94. Gopi, S; Amalraj, A; Jacob, J; Kalarikkal, N; Thomas, S; Guo, Q (2018), Preparation, characterization and in vitro study of liposomal curcumin powder by cost effective nanofiber weaving technology, New journal of chemistry, Vol. 42, NO. 7, PP. 5117-5127, Royal Society of Chemistry.

95. Goujon, N; Dumée, L; Byrne, N; Bryant, G; Forsyth, M (2018), Impact of comonomer chemistry on phase behavior of polymerizable lyotropic ionic liquid crystals: a pre- and postpolymerization study, Macromolecular Chemistry and Physics, Vol. 219, NO. 23, PP. 1-10, Wiley.

96. Gray, M; Linton, S; Allardyce, B (2018), cDNA sequences of GHF9 endo-β-1,4-glucanases in terrestrial Crustacea, Gene, Vol. 642, PP. 408-422, Elsevier.

97. Greene, G; Ortiz, V; Pozo-Gonzalo, C; Moulton, S; Wang, X; Martin, L; Michalczky, A; Howlett, P (2018), Lubricin Antiadhesive Coatings Exhibit Size-Selective Transport Properties that Inhibit Biofouling of Electrode Surfaces with Minimal Loss in Electrochemical Activity, Advanced materials interfaces, Vol. 5, NO. 7, PP. 1-10, Wiley.

98. Green, W; Collins, F; Forsyth, M (2018), Up-to-date review of aspects of steel reinforcement corrosion in concrete, Corrosion and materials, Vol. 43, NO. 3, PP. 64-76, Australasian Corrosion Association.

99. Gui, H; Zhang, T; Guo, Q (2018), Closed-cell, emulsion-templated hydrogels for latent heat storage applications, Polymer chemistry, Vol. 9, NO. 29, PP. 3970-3973, Royal Society of Chemistry.

100. Guo, C; Zhang, J; Jordan, J; Wang, X; Henning, R; Yarger, J (2018), Structural comparison of various silkworm silks: an insight into the structureproperty relationship, Biomacromolecules, Vol. 19, NO. 3, PP. 906-917, American Chemical Society.

101. Guo, T; Chao, Q; Siska, F; Cheng, J; Varma, R; Barnett, M (2018) Analysing single twinning events in Mg-6Zn using nanoindentation, Journal of alloys and compounds, Vol. 768, PP. 510-516, Elsevier.

102. Guo, T; Siska, F; Cheng, J; Barnett, M (2018) Initiation of basal slip and tensile twinning in magnesium alloys during nanoindentation, Journal of alloys and compounds, Vol. 731, PP. 620-630, Elsevier.

103. Hadigheh SA, Kashi S (2018) Effectiveness of vacuum consolidation in bonding fibre reinforced polymer (FRP) composites onto concrete surfaces, Construction and Building Materials, Vol. 187.

104. Haghdadi, N; Cizek, P; Hodgson, P; Tari, V; Rohrer, G; Beladi, H (2018), Effect of ferrite-toaustenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel, Acta materialia, Vol. 145, PP. 196-209, Elsevier.

105. Haghdadi, N; Cizek, P; Hodgson, P; Tari, V; Rohrer, G; Beladi, H (2018), Five-parameter crystallographic characteristics of the interfaces formed during ferrite to austenite transformation in a duplex stainless steel, Philosophical magazine, Vol. 98, NO. 14, PP. 1284-1306, Taylor & Francis.

106. Haleem, N; Gordon, S; Liu, X; Hurren, C; Wang, X (2018), Dynamic analysis of spinning triangle geometry part 1: validation of methodology, Journal of the textile institute, PP. 660-670, Taylor & Francis.

107. Haleem, N; Gordon, S; Liu, X; Hurren, C; Wang, X (2018), Dynamic analysis of spinning triangle geometry part 2: spinning triangle geometry and yarn quality. Journal of the textile institute, PP. 671-679, Taylor & Francis.

108. Haleem, N; Liu, X; Hurren, C; Gordon, S; Najar, S; Wang, X (2018), Investigating the cotton ring spun yarn structure using micro computerized tomography and digital image processing techniques, Textile Research Journal, Sage Publications Ltd. 109. Hameed, N; DumĂŠe, L; Allioux, F-M; Reghat, M; Church, J; Naebe, M; Magniez, K; Parameswaranpillai, J; Fox, B (2018), Graphene based room temperature flexible nanocomposites from permanently cross-linked networks, Scientific reports, Vol. 8, PP. 1-8, Nature Publishing Group.

110. Hancock, L; Ralph, N; Armand, M; Macfarlane, D; Forsyth, M (2018), In the lab: new ethical and supply chain protocols for battery and solar alternative energy laboratory research policy and practice, Journal of Cleaner Production, Vol. 187, PP. 485-495, Elsevier.

111. Hao, J; Wang, J; Qin, S; Liu, D; Li, Y; Lei, W (2018), B/N co-doped carbon nanosphere frameworks as high-performance electrodes for supercapacitors, Journal of materials chemistry A, Vol. 6, NO. 17, PP. 8053-8058, Royal Society of Chemistry.

112. Haque, A; Remadevi, R; Naebe, M (2018), Lemongrass (Cymbopogon): a review on its structure, properties, applications and recent developments, Cellulose, Vol. 25, NO. 10, PP. 5455-5477, Springer.

113. He, Q; Yu, G; Yan, S; DumĂŠe, L; Zhang, Y; Strezov, V; Zhao, S (2018), Renewable CO2 absorbent for carbon capture and biogas upgrading by membrane contactor, Separation and purification technology, Vol. 194, PP. 207-215, Elsevier.

114. Hilder, M; Howlett, P; Saurel, D; Anne, H; Casas Cabanas, M; Armand, M; Rojo, T; MacFarlane, D; Forsyth, M (2018), Stable cycling of NaFePO4 cathodes in high salt concentration ionic liquid electrolytes, Journal of Power Sources, Vol. 406, PP. 70-80, Elsevier.

115. Hilder, M; Howlett, P; Saurel, D; Gonzalo, E; Basile, A; Armand, M; Rojo, T; Kar, M; MacFarlane, D; Forsyth, M (2018) The effect of cation chemistry on physicochemical behaviour of superconcentrated NaFSI based ionic liquid electrolytes and the implications for Na battery performance, Electrochimica acta, Vol. 268, PP. 94-100, Elsevier.

29

Publications - continued 116. Honda R, Ryu M, Li J-L, Mizeikis V, Juodkazis S, Morikawa J (2018) Simple multi-wavelength imaging of birefringence:case study of silk, Scientific Reports, Vol. 8, article no. 17652.

117. Hughes, Z; Walsh, T (2018) Distinct differences in peptide adsorption on palladium and gold: introducing a polarizable model for Pd(111), Journal of physical chemistry C, Vol. 122, NO. 34, PP. 19625-19638, American Chemical Society.

118. Hughes ZE, Walsh TR (2018) Probing nanopatterned peptide self-organisation at the aqueous graphene interface, Nanoscale, Vol. 10, PP. 302–311, Royal Society of Chemistry.

119. Huo, Y; Tan, M (2018), Localised corrosion of cathodically protected pipeline steel under the effects of cyclic potential transients, Corrosion engineering science and technology, Vol. 53, NO. 5, PP. 348-354, Taylor & Francis.

120. Huo, Y; Tan, M (2018), Measuring and understanding the critical duration and amplitude of anodic transients, Corrosion engineering, science and technology, Vol. 53, NO. 1, PP. 65-72, Taylor & Francis.

121. Hutchinson, B; Bate, P; Lindell, D; Malik, A; Barnett, M; Lynch, P (2018), Plastic yielding in lath martensites – an alternative viewpoint, Acta materialia, Vol. 152, PP. 239-247, Elsevier.

122. Isik, M; Porcarelli, L; Lago, N; Zhu, H; Forsyth, M; Mecerreyes, D (2018), Proton conducting membranes based on poly(Ionic liquids) having phosphonium counter-cations, Macromolecular rapid communications, Vol. 39, NO. 3, Wiley.

123. Jäger, M; Zabihi, O; Ahmadi, M; Li, Q; Depalmeanar, A; Naebe, M (2018), Nano-enhanced interface in carbon fibre polymer composite using halloysite nanotubes, Composites part A: applied science and manufacturing, Vol. 109, PP. 115-123, Elsevier.

124. Jin X, Chang XD, Wang WY, Zhu ZT, Lin T (2018) Research Progress in Flexible Wearable Strain Sensors Based on Polydimethylsiloxane, Cailiao Gongcheng/Journal of Materials Engineering, Vol. 46, PP. 13-24.

125. Joseph, J; Hodgson, P; Jarvis, T; Wu, X; Stanford, N; Fabijanic, D (2018), Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured AlxCoCrFeNi high entropy alloys, Materials Science and Engineering: A, Vol. 733, PP. 59-70, Elsevier.

30

deakin.edu.au/ifm

126. Judson, G; McGregor, B; Ellis, K; Howse, A (2018), Evaluation of controlled-release devices for providing chromium sesquioxide and zinc in Huacaya alpacas at pasture, Australian veterinary journal, PP. 458-463, John Wiley & Sons.

127. Kadam G, Anuradha, Agarwal A, Puyad A, La DD, Evans RA, Li J, Gupta A, Bhosale SV (2018) Generating a three-dimensional non-fullerene electron acceptor by combining inexpensive spiro[fluorene-9,90-xanthene] and cyanopyridone functionalities. Materials Chemistry Frontiers, Vol. 2, pp. 1090-1096.

128. Kafi, A; Li, Q; Chaffraix, T; Khoo, J; Gengenbach, T; Magniez, K (2018), Surface treatment of carbon fibres for interfacial property enhancement in composites via surface deposition of water soluble POSS nanowhiskers, Polymer, Vol. 137, PP. 97-106, Elsevier.

129. Kamps, J; Henderson, L; Scheffler, C; van der Heijden, R; Simon, F; Bonizzi, T; Verghese, N (2018), Electrolytic surface treatment for improved adhesion between carbon fibre and polycarbonate, Materials, Vol. 11, NO. 11, PP. 1-19, MDPI. 130. Kandagal, V; Chen, F; Pringle, J; Forsyth, M (2018), Atomistic simulation of gas uptake and interfaceinduced disordering in solid phases of an organic ionic plastic crystal, Journal of physical chemistry B, Vol. 122, NO. 34, PP. 8274-8283, American Chemical Society.

131. Kar M, Plechkova NV, Seddon KR, Pringle JM, MacFarlane DR (2018) Ionic Liquids-Further Progress on the Fundamental Issues. Australian Journal of Chemistry, Vol. 72, PP. 3-10.

132. Kashi S, Gupta RK, Baum T, Kao N, Bhattacharya SN (2018) Phase transition and anomalous rheological behaviour of polylactide/graphene nanocomposites. Composites part B: Engineering, Vol. 135, Elsevier.

133. Kashi S, Gupta RK, Baum T, Kao N, Bhattacharya SN (2018) Influence of graphene nanoplatelet incorporation and dispersion state on thermal, mechanical and electrical properties of biodegradable matrices, Journal of Materials Science and Technology, Vol. 34. Elsevier.

134. Kashi, S; Hadigheh, S; Varley, R (2018), Microwave attenuation of graphene modified thermoplastic poly(butylene adipate-coterephthalate) nanocomposites, Polymers, Vol. 10, NO. 6, MDPI.

135. Kashi, S; Varley, R; De Souza, M; Al-Assafi, S; Di Pietro, A; De Lavigne, C; Fox, B (2018), Mechanical, thermal, and morphological behavior of silicone rubber during accelerated aging, Polymer - plastics technology and engineering, Vol. 57, NO. 16, PP. 1687-1696, Taylor & Francis.

136. Katzen, J; Velicky, M; Huang, Y; Drakeley, S; Hendren, W; Bowman, R; Cai, Q; Chen, Y; Li, L; Huang, F (2018), Rigorous and accurate contrast spectroscopy for ultimate thickness determination of micrometer-sized graphene on gold and molecular sensing, ACS applied materials and interfaces, Vol. 10, NO. 26, PP. 22520-22528, ACS Publications.

137. Kazum, O; Beladi, H; Kannan, M (2018), Hydrogen permeation in twinning-induced plasticity (TWIP) steel, International journal of hydrogen energy, Vol. 43, NO. 50, PP. 22685-22693, Elsevier.

138. Kerr, R; Singh, N; Arthur, T; Pathirana, T; Mizuno, F; Takechi, K; Forsyth, M; Howlett, P (2018), Watertolerant lithium metal cycling in high lithium concentration phosphonium-based ionic liquid electrolytes, Sustainable energy and fuels, Vol. 2, NO. 10, PP. 2276-2283, Royal Society of Chemistry.

139. Khoddam, S; Hodgson, P (2018), Advancing mechanics of barrelling compression test, Mechanics of materials, Vol. 122, PP. 1-8, Elsevier.

140. Khoddam, S; Tian, L; Sapanathan, T; Hodgson, P; Zarei-Hanzaki, A (2018), Latest developments in modeling and characterization of joining metal based hybrid materials, Advanced engineering materials, Vol. 20, NO. 9, PP. 1-26, John Wiley & Sons.

141. Khorasani, A; Gibson, I; Ghaderi, A (2018), Rheological characterization of process parameters influence on surface quality of Ti-6Al-4V parts manufactured by selective laser melting, International journal of advanced manufacturing technology, Vol. 97, NO. 9-12, PP. 3761-3775, Springer.

142. Kim D, Kannan K, Mateti S, Hwa C. (2018).

Indirect Nano-Construction Morphology of Ni3S2 Electrodes Renovates the Performance for Electrochemical Energy Storage, Vol. 1, PP. 6945-6952. ACS Publications.

143. Kong, H; Chao, Q; Cai, M; Pavlina, E; Rolfe, B; Hodgson, P; Beladi, H (2018) Microstructure evolution and mechanical behavior of a CMnSiAl TRIP steel subjected to partial austenitization along with quenching and partitioning treatment, Metallurgical and materials transactions A: physical metallurgy and materials science, Vol. 49, NO. 5, PP. 1509-1519, Springer.

144. Kumar A, Ghosh A, Roy A, Panda MR, Forsyth M, MacFarlane DR, Mitra S (2018) High-energy density room temperature sodium-sulfur battery enabled by sodium polysulfide catholyte and carbon cloth current collector decorated with MnO2 nanoarrays, Energy Storage Materials.

145. Lacava, M; Camargo, A; Garcia, L; BenamĂş, M; Santana, M; Fang, J; Wang, X; Blamires, S (2018), Web building and silk properties functionally covary among species of wolf spider, Journal of evolutionary biology, Vol. 31, NO. 7, PP. 968-978, John Wiley & Sons.

146. Ladani, R; Bhasin, M; Wu, S; Ravindran, A; Ghorbani, K; Zhang, J; Kinloch, A; Mouritz, A; Wang, C (2018), Fracture and fatigue behaviour of epoxy nanocomposites containing 1-D and 2-D nanoscale carbon fillers, Engineering fracture mechanics, Vol. 203, PP. 102-114, Elsevier.

147. Lapovok, R; Timokhina, I; Mester, A; Weiss, M; Shekhter, A (2018), Influence of the strain history on TWIP steel deformation mechanisms in the deep-drawing process, Metallurgical and materials transactions A, Vol. 49, NO. 6, PP. 2069-2083, Springer.

148. Lapovok, R; Timokhina, I; Mester, K; Weiss, M; Shekhter, A (2018), Correction to: influence of the strain history on TWIP steel deformation mechanisms in the deep-drawing process, Metallurgical and materials transactions A, Vol. 49, NO. 11, PP. 5911-5911, Springer.

149. Lapovok, R; Zolotoyabko, E; Berner, A; Skripnyuk, V; Lakin, E; Larianovsky, N; Xu, C; Rabkin, E (2018), Hydrogenation effect on microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloys, Materials science and engineering A, Vol. 719, PP. 171-177, Elsevier.

150. Latino, M; Varela, F; Forsyth, M; Tan, Y (2018), Self-validating electrochemical methodology for quantifying ionic currents through pipeline coatings, Progress in organic coatings, Vol. 120, PP. 153-159, Elsevier.

31

Publications - continued 151. Laurien, M; Demir, B; Buttemeyer, H; Herrmann, A; Walsh, T; Ciacchi, L (2018), Atomistic modeling of the formation of a thermoset/thermoplastic interphase during co-curing, Macromolecules, Vol. 51, NO. 11, PP. 3983-3993, American Chemical Society.

152. Lawrence, R; Hughes, Z; Cendan, V; Liu, Y; Lim, C-K; Prasad, P; Swihart, M; Walsh, T; Knecht, M (2018), Optical control of nanoparticle catalysis influenced by photoswitch positioning in hybrid peptide capping ligands, ACS applied materials and interfaces, Vol. 10, NO. 39, PP. 33640-33651, ACS Publications.

153. Lennert, A; Wagner, K; Yunis, R; Pringle, J; Guldi, D; Officer, D (2018), Efficient and stable solid-state dye-sensitized solar cells by the combination of phosphonium organic ionic plastic crystals with silica, ACS applied materials and interfaces, Vol. 10, NO. 38, PP. 32271-32280, American Chemical Society.

154. Li, J; Gan, L; Liu, Y; Mateti, S; Lei, W; Chen, Y; Yang, J (2018), Boron nitride nanosheets reinforced waterborne polyurethane coatings for improving corrosion resistance and antifriction properties, European polymer journal, Vol. 104, PP. 57-63, Elsevier.

155. Li, L; Tian, T; Cai, Q; Shih, C-J; Santos, E (2018), Asymmetric electric field screening in van der Waals heterostructures, Nature Communications, Vol. 9, PP. 1-11, Springer Nature.

156. Li Q, Woodhead AL, Church JS, Naebe M (2018) On the detection of carbon fibre storage contamination and its effect on the fibre-matrix interface. Scientific Reports, Vol. 8, article No. 16446.

157. Li, S; Gou, S; Zhou, L; Zhang, Q; Yang, K; Wu, Y; Guo, Q (2018), Prominent temperature-response and salt irritation from self-assemblies of polyzwitterion-sodium lauryl sulfonate, Journal of molecular liquids, Vol. 253, PP. 305-313, Elsevier.

32

160. Li, Y; Feng, X; Liu, H; Hao, J; Redfern, S; Lei, W; Liu, D; Ma, Y (2018), Route to high-energy density polymeric nitrogen t-N via He-N compounds, Nature Communications, Vol. 9, NO. 1, Nature Publishing Group.

161. Liang, Y; Han, Q; Byrne, N; Sun, L; Wang, X (2018), Recyclable one-step extraction and characterization of intact melanin from alpaca fibers, Fibers and polymers, Vol. 19, NO. 8, PP. 1640-1646, Springer.

162. Lin, B; Dobeli, M; Mudie, S; Hawley, A; Hodgson, P; Kong, L; Spolenak, R; DumĂŠe, L (2018), An in-situ small angle x ray scattering analysis of nanopore formation during thermally induced chemical dealloying of brass thin foils, Scientific reports, Vol. 8, NO. 1, Nature Publishing Group.

163. Liu, B; Yang, N; Wang, J; Barnett, M; Xin, Y; Wu, D; Xin, R; Li, B; Narayan, R; Nie, J; Li, J; Ma, E; Shan, Z (2018), Insight from in situ microscopy into which precipitate morphology can enable high strength in magnesium alloys, Journal of materials science and technology, Vol. 34, NO. 7, PP. 1061-1066, Elsevier.

164. Liu, J; Song, B; Li, J; Tian, X; Ma, Y; Yang, K; Yuan, B (2018), Photoluminescence modulation of silicon nanoparticles via highly ordered arrangement with phospholipid membranes, Colloids and surfaces B: biointerfaces, Vol. 170, PP. 656-662, Elservier.

165. Liu, J; Xiao, S; Li, J; Yuan, B; Yang, K; Ma, Y (2018), Molecular details on the intermediate states of melittin action on a cell membrane, Biochimica et Biophysica Acta - Biomembranes, Vol. 1860, NO. 11, PP. 2234-2241, Elsevier.

166. Liu, Y; Mateti, S; Glushenkov, A; Liu, D; Li, L; Fabijanic, D; Chen, Y; Li, C; Liu, X (2018), Synthesis of composite nanosheets of graphene and boron nitride and their lubrication application in oil, Advanced engineering materials, Vol. 20, NO. 2, Wiley.

158. Li, W; Allioux, F-M; Lee, J; Ashokkumar, M; DumĂŠe, L (2018), Ultrasound-assisted fabrication of metal nano-porous shells across polymer beads and their catalytic activity for reduction of 4-nitrophenol, Ultrasonics sonochemistry, Vol. 49, PP. 63-68, Elsevier.

167. Liu, Y; Zhang, B; Xu, Q; Hou, Y; Seyedin, S; Qin, S; Wallace, G; Beirne, S; Razal, J; Chen, J (2018), Development of graphene oxide/ polyaniline inks for high performance flexible microsupercapacitors via extrusion printing, Advanced functional materials, Vol. 28, NO. 21, PP. 1-12, Wiley.

159. Li, X; Deng, S; Lin, T; Xie, X; Du, G (2018), Cassava starch-sodium allylsulfonate-acryl amide graft copolymer as an effective inhibitor of aluminum corrosion in HCl solution, Journal of the Taiwan Institute of Chemical Engineers, Vol. 86, PP. 252-269, Elsevier.

168. Liu, Z; Liu, J; Wang, Y; Razal, J; Francis, P; Biggs, M; Barrow, C; Yang, W (2018), Simultaneously 'pushing' and 'pulling' graphene oxide into lowpolar solvents through a designed interface, Nanotechnology, Vol. 29, NO. 31, PP. 1-9, IOPSCience.

deakin.edu.au/ifm

169. Lou Y, Yoon JW (2018) Anisotropic yield function based on stress invariants for BCC and FCC metals and its extension to ductile fracture criterion, International Journal of Plasticity, PP. 125-155, Vol. 101, Elsevier.

170. Lou Y, Yoon JW, Huh H, Chao Q, Song JH (2018) Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio. International journal of mechanical sciences, Vol. 146-147, PP. 583-601, Elsevier.

171. Lu, W; Herbig, M; Liebscher, C; Morsdorf, L; Marceau, R; Dehm, G; Raabe, D (2018), Formation of eta carbide in ferrous martensite by room temperature aging, Acta materialia, Vol. 158, PP. 297-312, Elsevier.

172. Luo, G; Gao, L; Zhang, D; Zhang, J; Lin, T (2018), Highly efficient capacitive deionization electrodes from electro spun carbon nanofiber membrane containing reduced graphene oxide and carbon nanotube, Desalination and water treatment, Vol. 135, PP. 157-166, Balaban Publishers.

178. Maina, J; Pozo-Gonzalo, C; Merenda, A; Kong, L; Schutz, J; DumÊe, L (2018), The growth of high density network of MOF nano-crystals across macroporous metal substrates – solvothermal synthesis versus rapid thermal deposition, Applied surface science, Vol. 427, NO. Part A, PP. 401-408, Elsevier.

179. Makhlooghiazad, F; Guazzagaloppa, J; O'Dell, L; Yunis, R; Basile, A; Howlett, P; Forsyth, M (2018), The influence of the size and symmetry of cations and anions on the physicochemical behavior of organic ionic plastic crystal electrolytes mixed with sodium salts, Physical chemistry chemical physics, Vol. 20, NO. 7, PP. 4721-4731, Royal Society of Chemistry.

180. Manohar CV, Forsyth M, MacFarlane DR, Mitra S (2018) Role of N-Propyl-N-Methyl Pyrrolidinium bis(trifluoromethanesulfonyl)imide as an Electrolyte Additive in Sodium Battery Electrochemistry, Energy Technology 6 (11), PP. 2232-2237.

173. Luo, G; Wang, Y; Gao, L; Zhang, D; Lin, T (2018), Graphene bonded carbon nanofiber aerogels with high capacitive deionization capability, Electrochimica acta, Vol. 260, PP. 656-663, Elsevier.

181. Manohar, C; Mendes, T; Kar, M; Wang, D; Xiao, C; Forsyth, M; Mitra, S; MacFarlane, D (2018), Ionic liquid electrolytes supporting high energy density in sodium-ion batteries based on sodium vanadium phosphate composites, Chemical communications, Vol. 54, NO. 28, PP. 3500-3503, Royal Society of Chemistry.

174. MacFarlane, D; Chong, A; Forsyth, M; Kar, M; Vijayaraghavan, R; Somers, A; Pringle, J (2018), New dimensions in salt-solvent mixtures: a 4th evolution of ionic liquids, Faraday Discussions, Vol. 206, PP. 9-28, Royal Society of Chemistry.

182. Manohar CV, Raj AK, Kar M, Forsyth M, MacFarlane DR, Mitra S (2018) Stability enhancing ionic liquid hybrid electrolyte for NVP@C cathode based sodium batteries, Sustainable Energy & Fuels, Vol. 2. PP. 566-577, Royal Society Chemistry.

175. Mahawish, A; Bouazza, A; Gates, W (2018), Effect of particle size distribution on the bio-cementation of coarse aggregates, Acta geotechnica, Vol. 13, NO. 4, PP. 1019-1025, Springer.

183. Martin P-A, Chen F, Forsyth M, Deschamps M, O'Dell LA (2018) Correlating Intermolecular CrossRelaxation Rates with Distances and Coordination Numbers in Ionic Liquids, J Phys Chem Lett.

176. Mahawish, A; Bouazza, A; Gates, W (2018), Improvement of coarse sand engineering properties by microbially induced calcite precipitation, Geomicrobiology Journal, Vol. 35, NO. 10, PP. 887-897, Taylor & Francis.

184. Martin, P-A; Salager, E; Forsyth, M; O'Dell, L; Deschamps, M (2018), On the measurement of intermolecular heteronuclear cross relaxation rates in ionic liquids, Physical chemistry chemical physics, Vol. 20, NO. 19, PP. 13357-13364, Royal Society of Chemistry.

177. Mahawish A, Bouazza A, Gates WP (2018) Strengthening crushed coarse aggregates using bio-grouting, Geomechanics and Geoengineering, PP. 59-70.

185. Mateti, S; Wong, C; Liu, Z; Yang, W; Li, Y; Li, L; Chen, Y (2018), Biocompatibility of boron nitride nanosheets, Nano research, Vol. 11, NO. 1, PP. 334-342, Tsinghua University Press.

33

Publications - continued 186. Mateti, S; Yang, K; Liu, X; Huang, S; Wang, J; Li, L; Hodgson, P; Zhou, M; He, J; Chen, Y (2018), Bulk hexagonal boron nitride with a quasi-isotropic thermal conductivity, Advanced functional materials, Vol. 28, NO. 28, PP. 1-8, John Wiley & Sons.

195. Medvedev, A; Murashkin, M; Enikeev, N; Valiev, R; Hodgson, P; Lapovok, R (2018), Optimization of strength-electrical conductivity properties in Al-2Fe alloy by severe plastic deformation and heat treatment, Advanced engineering materials, Vol. 20, NO. 3, Wiley.

187. McGregor, B (2018), Investigating the Angora goat agro-pastoral production system in southern Australia, Small ruminant research, Vol. 163, PP. 10-14, Elsevier.

196. Medvedev, A; Murashkin, M; Enikeev, N; Valiev, R; Hodgson, P; Lapovok, R (2018), Enhancement of mechanical and electrical properties of Al-RE alloys by optimizing rare-earth concentration and thermo-mechanical treatment, Journal of alloys and compounds, Vol. 745, PP. 696-704, Elsevier.

188. McGregor, B (2018), The effects of nutrition and parity on the development and productivity of Angora goats: 3. Effects of six combinations of mid pregnancy and postnatal nutrition on udder development, lactation, milk composition and net energy of milk production, Small ruminant research, Vol. 161, PP. 13-23, Elsevier.

189. McGregor, B; Howse, A (2018), The effects of mid pregnancy and postnatal nutrition, birth parity and sex on Angora goat live weight gain, skin follicle development, mohair physical properties and fleece value, Small Ruminant Research, Vol. 169, PP. 8-18, Elsevier.

190. McGregor, B; Liu, X; Wang, X (2018), Comparisons of the Fourier Transform Infrared Spectra of cashmere, guard hair, wool and other animal fibres, Journal of the textile institute, Vol. 109, NO. 6, PP. 813-822, Taylor & Francis.

191. McGregor, B; Quispe Pena, E (2018), Cuticle and cortical cell morphology of alpaca and other rare animal fibres, Journal of the Textile Institute, Vol. 109, NO. 6, PP. 767-774, Taylor & Francis.

192. Meabe, L; Huynh, T; Lago, N; Sardon, H; Li, C; O'Dell, L; Armand, M; Forsyth, M; Mecerreyes, D (2018), Poly(ethylene oxide carbonates) solid polymer electrolytes for lithium batteries, Electrochimica acta, Vol. 264, PP. 367-375, Elsevier.

193. Medvedev, A; Lapovok, R; Koch, E; Hoppel, H; Goken, M (2018), Optimisation of interface formation by shear inclination: example of aluminium-cooper hybrid produced by ECAP with back-pressure, Materials and design, Vol. 146, PP. 142-151, Elsevier.

194. Medvedev, A; Mendes, A; Lapovok, R; Semiatin, S (2018), Shear-induced, solid-state joining of Ti-6Al4V and Ti17 titanium alloys, Materials science and engineering A, Vol. 737, PP. 253-264, Elsevier.

197. Medvedev, A; Murashkin, M; Kazykhanov, V; Valiev, R; Medvedev, A; Hodgson, P; Lapovok, R (2018), Enhancement of mechanical and electrical properties in Al 6101 alloy by severe shear strain under hydrostatic pressure, Advanced engineering materials, Vol. 20, NO. 11, PP. 1-7, Wiley.

198. Mendes, T; Zhou, F; Barlow, A; Forsyth, M; Howlett, P; MacFarlane, D (2018), An ionic liquid based sodium metal-hybrid supercapacitorbattery, Sustainable energy & fuels, Vol. 2, NO. 4, PP. 763-771, Royal Society of Chemistry.

199. Modepalli, V; Kumar, A; Sharp, J; Saunders, N; Nicholas, K; Lefevre, C (2018), Gene expression profiling of postnatal lung development in the marsupial gray short-tailed opossum (Monodelphis domestica) highlights conserved developmental pathways and specific characteristics during lung organogenesis, BMC genomics, Vol. 19, PP. 1-14, BMC. 200. Moradi, S; Liu, X; Shaikhzadeh Najar, S; Wang, X (2018), Tensile strength prediction of irregular fibres using diameter-dependent Weibull analysis, Journal of the textile institute, Taylor & Francis.

201. Mota-Santiago P, Vazquez H, Bierschenk T, Kremer F, Nadzri A, Schauries D, Djurabekova F, Nordlund K, Trautmann C, Mudie S, Ridgway MC, Kluth P (2018) Nanoscale density variations induced by high energy heavy ions in amorphous silicon nitride and silicon dioxide. Nanotechnology, Vol. 29(4) 144004.

202. Naebe, M; McGregor, B; Dowling, M; Tester, D (2018), Prickle discomfort assessment of commercial knitted wool garments, International Journal of Clothing Science and Technology, Vol. 30, NO. 1, PP. 73-81, Emerald.

203. Najar, S; Wang, X; Naebe, M (2018), The effect of plasma treatment and tightness factor on the low-stress mechanical properties of single jersey knitted wool fabrics, Textile research journal, Vol. 88, NO. 5, PP. 499-509, SAGE.

34

deakin.edu.au/ifm

204. Nam, N; Panaitescu, C; Tan, M; Forsyth, M; Hinton, B (2018), An interaction between praseodymium 4-Hydroxycinnamate with AS1020 and X65 steel microstructures in carbon dioxide environment, Journal of The Electrochemical Society, Vol. 165, NO. 2, PP. C50-C59, Electrochemical Society.

213. Pakdel, E; Daoud, W; Seyedin, S; Wang, J; Razal, J; Sun, L; Wang, X (2018), Tunable photocatalytic selectivity of TiO2/SiO2 nanocomposites: effect of silica and isolation approach, Colloids and surfaces A: physicochemical and engineering aspects, Vol. 552, PP. 130-141, Elsevier.

205. Nasri-Nasrabadi, B; Kaynak, A; Komeily Nia, Z; Li, J; Zolfagharian, A; Adams, S; Kouzani, A (2018), An electroactive polymer composite with reinforced bending strength, based on tubular micro carbonized-cellulose, Chemical engineering journal, Vol. 334, PP. 1775-1780, Elsevier.

214. Pal, U; Girard, G; O'Dell, L; Roy, B; Wang, X; Armand, M; Macfarlane, D; Howlett, P; Forsyth, M (2018), Improved Li-ion transport by DME chelation in a novel ionic liquid based hybrid electrolyte for Li-S battery application, Journal of physical chemistry C, Vol. 122, NO. 26, PP. 14373-14382, American Chemical Society.

206. Nasri-Nasrabadi, B; Kaynak, A; Komeily-Nia, Z; Adams, S; Li, J; Kouzani, A (2018), Surface nanogrooving of carbon microtubes, Scientific reports, Vol. 8, PP. 1-8, Nature Publishing Group.

207. Newman, J; Sharp, J; Enjapoori, A; Bentley, J; Nicholas, K; Adams, T; Peat, T (2018), Structural characterization of a novel monotreme-specific protein with antimicrobial activity from the milk of the platypus, Acta crystallograhica section F: structural biology communications, Vol. 74, NO. Part 1, PP. 39-45, International Union of Crystallography.

208. Nguyen, M; Hughes, Z; Liu, Y; Li, Y; Swihart, M; Knecht, M; Walsh, T (2018), Peptide-mediated growth and dispersion of au nanoparticles in water via sequence engineering, Journal of physical chemistry C, Vol. 122, NO. 21, PP. 11532-11542, ACS Publications.

209. Niu, H; Zhou, H; Yan, G; Wang, H; Fu, S; Zhao, X; Shao, H; Lin, T (2018), Enhancement of coil electrospinning using two-level coil structure, Industrial and Engineering Chemistry Research, Vol. 57, NO. 45, PP. 15473-15478, ACS Publications.

210. Notthoff C, Mota-Santiago P, Hadley A, Hossain UH, Jordan S, Glover C, Mudie S, Kluth P. (2018), Structural properties of nano-porous GaSb prepared by swift heavy-ion irradiation, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol. 435, PP. 126-132, Elsevier.

215. Pan, Y; Hurren, C; Li, Q (2018), Effect of sonochemical scouring on the surface morphologies, mechanical properties, and dyeing abilities of wool fibres, Ultrasonics sonochemistry, Vol. 41, PP. 227-233, Elsevier.

216. Pan, Y; Wang, W; Gong, K; Hurren, C; Li, Q (2018), Ultrasonic scouring as a pretreatment of wool and its application in low-temperature dyeing, Textile research journal, PP. 1-8, SAGE Publications.

217. Parvizi, R; Hughes, A; Glenn, A; Cizek, P; Tan, M; Forsyth, M (2018), Role of microstructure in corrosion initiation of a highly-deformed AA2024 wire, Corrosion science, Vol. 144, PP. 184-197, Elsevier.

218. Pavuluri, S; Sharp, J; Lefevre, C; Nicholas, K (2018), The effect of mammary extracellular matrix in controlling oral and mammary cancer cells, Asian Pacific journal of cancer prevention, Vol. 19, NO. 1, PP. 57-63, Asian Pacific Organization for Cancer Prevention (APOCP).

219. Peng, Y; Hughes, A; Deacon, G; Junk, P; Hinton, B; Forsyth, M; Mardel, J; Somers, A (2018), A study of rare-earth 3-(4-methylbenzoyl)-propanoate compounds as corrosion inhibitors for AS1020 mild steel in NaCl solutions, Corrosion science, Vol. 145, PP. 199-211, Elsevier.

220. Pereloma, E; Timokhina, I (2018), Deformationinduced phase transformations, Metals, Vol. 8, NO. 11, PP. 1-2, MDPI.

211. Nunna, S; Maghe, M; Fakhrhoseini, S; Polisetti, B; Naebe, M (2018), A pathway to reduce energy consumption in the thermal stabilization process of carbon fiber production, Energies, Vol. 11, NO. 5, PP. 1-10, MDPI. 212. Oroumei, A; Lynch, P; Tobin, M; Naebe, M (2018), Synchrotron X-ray scattering and IR-mapping studies of wet-spun lignin-derived carbon fibre precursor, Composites science and technology, Vol. 163, PP. 151-161, Elsevier.

35

Publications - continued 221. Poznak, A; Marceau, R; Sanders, P (2018), Composition dependent thermal stability and evolution of solute clusters in Al-Mg-Si analyzed using atom probe tomography, Materials science and engineering A, Vol. 721, PP. 47-60, Elsevier.

222. Pozo-Gonzalo, C; Forsyth, M; Fdz de Anastro, A; Casado, N; Wang, X; Rehmen, J; Evans, D; Mecerreyes, D (2018), Poly(ionic liquid) iongels for all-solid rechargeable zinc/PEDOT batteries, Electrochimica Acta, Vol. 278, PP. 271-278, Elsevier.

223. Qi, Y; Timokhina, I; Shekhter, A; Sharp, K; Lapovok, R (2018), Optimization of upcycling of Ti-6Al-4V swarf, Journal of materials processing technology, Vol. 255, PP. 853-864, Elsevier.

224. Qiao, Y; Sun, Q; Sha, O; Zhang, X; Tang, Y; Shen, T; Kong, L; Gao, W (2018), Synthesis of Mn3O4 nanomaterials via CTAB/SDS vesicle templating for high performance supercapacitors, Materials letters, Vol. 210, PP. 128-132, Elsevier.

225. Qin, S; Liu, D; Chen, Y; Chen, C; Wang, G; Wang, J; Razal, J; Lei, W (2018), Nanofluidic electric generators constructed from boron nitride nanosheet membranes, Nano energy, Vol. 47, PP. 368-373, Elsevier.

226. Qin, S; Seyedin, S; Zhang, J; Wang, Z; Yang, F; Liu, Y; Chen, J; Razal, J (2018), Elastic fiber supercapacitors for wearable energy storage, Macromolecular rapid communications, Vol. 39, NO. 13, PP. 1-11, John Wiley & Sons.

227. Quayle, K; Doeven, E; Alexander, R; De Guzman, G; Clarke, A; Francis, P; Conlan, X; Haswell, S (2018), A simple device for rapid quantification of cell number from equine buccal swab samples, Analytical methods: advancing methods and applications, Vol. 10, NO. 13, PP. 1523-1528, Royal Society of Chemistry.

36

230. Randall, J; Eyckens, D; Stojcevski, F; Francis, P; Doeven, E; Barlow, A; Barrow, A; Arnold, C; Moses, J; Henderson, L (2018), Modification of carbon fibre surfaces by sulfur-fluoride exchange click chemistry, Chemphyschem, Vol. 19, NO. 23, PP. 3176-3181, Wiley.

231. Rao, J; Vijayaraghavan, R; Wang, X; Zhou, Y; Howlett, P; Macfarlane, D; Forsyth, M; Zhu, H (2018), Influence of electrospun poly (vinylidene difluoride) nanofiber matrix on the ion dynamics of a protic organic ionic plastic crystal, Journal of physical chemistry C, Vol. 122, NO. 26, PP. 14546-14553, American Chemical Society.

232. Rao, J; Vijayaraghavan, R; Zhou, Y; Howlett, P; MacFarlane, D; Forsyth, M; Zhu, H (2018), The influence of anion chemistry on the ionic conductivity and molecular dynamics in protic organic ionic plastic crystals, Physical chemistry chemical physics, Vol. 20, NO. 6, PP. 4579-4586, Royal Society of Chemistry.

233. Rao, P; Gupta, A; Srivani, D; Bhosale, S; Bilic, A; Li, J; Xiang, W; Evans, R; Bhosale, S (2018), An efficient non-fullerene acceptor based on central and peripheral naphthalene diimides, Chemical communications, Vol. 54, NO. 40, PP. 5062-5065, Royal Society of Chemistry.

234. Raynal, L; Allardyce, B; Wang, X; Dilley, R; Rajkhowa, R; Henderson, L (2018), Facile and versatile solid state surface modification of silk fibroin membranes using click chemistry, Journal of materials chemistry B, Vol. 6, NO. 48, PP. 8037-8042, Royal Society of Chemistry.

235. Remadevi, R; Gordon, S; Wang, X; Rajkhowa, R (2018), Tensile, physical, and microstructure properties of glycine treated cotton fibers, Textile research journal, Vol. 88, NO. 12, PP. 1356-1366, SAGE Publications.

228. Rana HH, Park JH, Ducrot E, Park H, Kota M, Han TH, Lee JY, Kim J, Kim JH, Howlett P, Forsyth M, MacFarlane D, Park HS (2018) Extreme properties of double networked ionogel electrolytes for flexible and durable energy storage devices, Energy Storage Materials, Elsevier.

236. Rittel, D; Shemtov-Yona, K; Lapovok, R (2018), Random spectrum fatigue performance of severely plastically deformed titanium for implant dentistry applications, Journal of the mechanical behavior of biomedical materials, Vol. 83, PP. 94-101, Elsevier.

229. Ranade, S; Hughes, T; Yang, S; Forsyth, M; Li, J; Wang, H; Tan, M (2018), Visualizing the impact of mechanical strain and the environment on pipeline coatings from a three dimensional perspective, Progress in organic coatings, Vol. 122, PP. 45-55, Elsevier.

237. Robson JD, Barnett MR (2018) The Effect of Precipitates on Twinning in Magnesium Alloys.

Advanced Engineering Materials.

deakin.edu.au/ifm

238. Rojo T, Hu YS, Forsyth M, Li X (2018) Sodium-ion batteries, Advanced Energy Materials, Vol. 8.

239. Russo M, Warren H, Spinks GM, Macfarlane DR, Pringle JM (2018) Hydrogels containing the ferri/ ferrocyanide redox couple and ionic liquids for thermocells, Australian Journal of Chemistry, Vol. 72, PP. 112-121.

240. Rutter, G; Brown, A; Quigley, D; Walsh, T; Allen, M (2018), Emergence of order in self-assembly of the intrinsically disordered biomineralisation peptide n16N, Molecular simulation, Vol. 44, NO. 6, PP. 463-469, Taylor & Francis.

241. Ryu, M; Balcytis, A; Wang, X; Vongsvivut, J; Hikima, Y; Li, J; Tobin, M; Juodkazis, S; Morikawa, J (2018), Author correction: Orientational Mapping Augmented Sub-Wavelength Hyper-Spectral Imaging of Silk, scientific Reports, Vol. 8, PP. 1-1, Nature Publishing Group.

242. Sani, M-A; Martin, P-A; Yunis, R; Chen, F; Forsyth, M; Deschamps, M; O'Dell, L (2018), Probing ionic liquid electrolyte structure via the glassy state by dynamic nuclear polarization NMR spectroscopy, Journal of physical chemistry letters, Vol. 9, NO. 5, PP. 1007-1011, American Chemical Society.

243. Scholes, G; Bisquert, J; Forsyth, M; Mennucci, B; Prezhdo, O; Zaera, F; Zwier, T; Schatz, G (2018), Editorial: 2017 in Perspective, JOURNAL OF PHYSICAL CHEMISTRY LETTERS, Vol. 9, NO. 1, PP. 138-140, American Chemical Society.

244. Sen S, Zhu H, Forsyth M, Bhattacharyya AJ (2018) Time-Temperature Scaling and Dielectric Modeling of Conductivity Spectra of Single-Ion Conducting Liquid Dendrimer Electrolytes, J Phys Chem B. 245. Seneviratne, SL, Wong, C, Lefevre C, Walder K, Shigdar S, Kirkland M, Sharp J (2018) Ficolin-1 and the fibrinogen-like domain: Hematopoietic stem cell expansion and its mechanism, Cytotherapy, Vol. 20(5) S120 - S121.

246. Seraji SM, Haoguan G, Zhang J, Guo Q (2018) Nanophase Morphology and Crystallization in Poly(vinylidene fluoride)/Poly(dimethyl siloxane)– block–Poly(methyl methacrylate) Blends, Polymer International, Wiley.

247. Seyedin, S; Moradi, S; Singh, C; Razal, J (2018), Continuous production of stretchable conductive multifilaments in kilometer scale enables facile knitting of wearable strain sensing textiles, Applied materials today, Vol. 11, PP. 255-263, Elsevier.

248. Seyedin, S; Moradi, S; Singh, C; Razal, J (2018), Data on kilometer scale production of stretchable conductive multifilaments enables knitting wearable strain sensing textiles, Data brief, Vol. 18, PP. 1765-1772, Elsevier.

249. Shanbhag, V; Rolfe, B; Arunachalam, N; Pereira, M (2018), Investigating galling wear behaviour in sheet metal stamping using acoustic emissions, Wear, Vol. 414-415, PP. 31-42, Elsevier.

250. Shao H, Fang J, Wang H, Zhou H, Niu H, Chen F, Yan G, Fu S, Cao Y, Lin T (2018) Doping Effect on Conducting Polymer-Metal Schottky DC Generators, Advanced Electronic Materials, Vol. 5.

251. Sharel PE, Kang M, Wilson P, Meng L, Perry D, Unwin PR, Basile A (2018) High resolution visualization of the redox activity of Li₂O₂ in non-aqueous media: conformal layer vs. toroid structure. Chemical communications, Vol. 54, PP. 3053-3056, Royal Society of Chemistry.

252. She, X; Chen, L; Yi, Z; Li, C; He, C; Feng, C; Wang, T; Shigdar, S; Duan, W; Kong, L (2018), Tailored mesoporous silica nanoparticles for controlled drug delivery: platform fabrication, targeted delivery, and computational design and analysis, Mini-reviews in medicinal chemistry, Vol. 16, NO. 11, PP. 976-989, Bentham Science Publishers.

253. Shi, G; Chen, L; Yang, Y; Li, D; Qian, Z; Liang, S; Yan, L; Li, L; Wu, M; Fang, H (2018), Twodimensional Na-Cl crystals of unconventional stoichiometries on graphene surface from dilute solution at ambient conditions, Nature Chemistry, Vol. 10, PP. 776-779, Nature Publishing Group [Springer Nature].

254. Shirvanimoghaddam, K; Abolhasani, M; Polisetti, B; Naebe, M (2018), Periodical patterning of a fully tailored nanocarbon on CNT for fabrication of thermoplastic composites, Composites part A: applied science and manufacturing, Vol. 107, PP. 304-314, Elsevier.

255. Shirvanimoghaddam, K; Czech, B; Abolhasani, M; Naebe, M (2018), Sustainable periodically patterned carbon nanotube for environmental application: introducing the cheetah skin structure, Journal of cleaner production, Vol. 179, PP. 429-440, Elsevier.

256. Shirvanimoghaddam K, Czech B, Wiącek AE, Ćwikła-Bundyra W, Naebe M (2018) Sustainable carbon microtube derived from cotton waste for environmental applications, Chemical Engineering Journal, Vol. 361, PP. 1605-1616.

257. Shirvanimoghaddam, K; Polisetti, B; Dasari, A; Yang, J; Ramakrishna, S; Naebe, M (2018), Thermomechanical performance of cheetah skin carbon nanotube embedded composite: isothermal and non-isothermal investigation, Polymer, Vol. 145, PP. 294-309, Elsevier.

37

Publications - continued 258. Shterner, V; Timokhina, I; Rollett, A; Beladi, H (2018), The role of grain orientation and grain boundary characteristics in the mechanical twinning formation in a high manganese twinninginduced plasticity steel, Metallurgical and materials transactions A: physical metallurgy and materials Science, Vol. 49, NO. 7, PP. 2597-2611, Springer.

259. Siamphukdee, K; Zou, R; Collins, F; Shayan, A (2018), Modeling steel-concrete bond strength depletion during corrosion, ACI materials journal, Vol. 115, NO. 2, PP. 267-277, American Concrete Institute.

260. Singh, C; Gordon, S; Wang, X (2018), The mechanism of hairiness reduction in offset ring spinning with a diagonal yarn path, Textile research journal, PP. 1-11, Sage.

261. Singh, C; Gordon, S; Zhang, S; Wang, X (2018), A new insight into the dynamics of fibre migration in ring spinning, Journal of the Textile Institute, PP. 1-10, Taylor & Francis.

262. Somers, A; Hinton, B; de Bruin-Dickason, C; Deacon, G; Junk, P; Forsyth, M (2018), New, environmentally friendly, rare earth carboxylate corrosion inhibitors for mild steel, Corrosion science, Vol. 139, PP. 430-437, Elsevier.

263. Song, P; Dai, J; Chen, G; Yu, Y; Fang, Z; Lei, W; Fu, S; Wang, H; Chen, Z-G (2018), Bioinspired design of strong, tough, and thermally stable polymeric materials via nanoconfinement, ACS nano, Vol. 12, NO. 9, PP. 9266-9278, American Chemical Society.

264. Soulsby, L; Hayne, D; Doeven, E; Chen, L; Hogan, C; Kerr, E; Adcock, J; Francis, P (2018), Electrochemically, spectrally, and spatially resolved annihilation-electrogenerated chemiluminescence of mixed-metal complexes at working and counter electrodes, Chemelectrochem, Vol. 5, NO. 12, PP. 1543-1547, John Wiley & Sons.

38

267. Srivani D, Gupta A, Bhosale SV, Ohkubo K, Bhosale RS, Fukuzumi S, Bilic A, Jones LA, Bhosale SV (2018) A triphenylamine–naphthalenediimide–fullerene triad: synthesis, photoinduced charge separation and solution-processable bulk heterojunction solar cells, Asian journal of organic chemistry, Vol. 7, PP. 220-226, John Wiley & Sons.

268. Stanford, N; Dorin, T; Hodgson, P (2018), The effect of Nb micro-alloying on the bainitic phase transformation under strip casting conditions, Metallurgical and Materials Transactions A, Vol. 49, NO. 4, PP. 1021-1025, Springer New York.

269. Stanger, R; Tran, Q; Browne, M; Lucas, J; Naebe, M; Height, M; Wall, T (2018), Evaluating the thermal extrusion behavior of a coking coal for direct carbon fiber production, Energy and Fuels, Vol. 32, NO. 4, PP. 4528-4537, ACS Publications.

270. Stojceveski, F; Hendlmeier, A; Randall, J; Arnold, C; Stanfield, M; Eyckens, D; Alexander, R; Henderson, L (2018), Effect of tow size and interface interaction on interfacial shear strength determined by Iosipescu (V-Notch) testing in epoxy resin, Materials, Vol. 11, NO. 9, PP. 1-12, MDPI. 271. Stojcevski, F; Hilditch, T; Gengenbach, T; Henderson, L (2018), Effect of carbon fiber oxidization parameters and sizing deposition levels on the fiber-matrix interfacial shear strength, Composites part A: applied science and manufacturing, Vol. 114, PP. 212-224, Elsevier.

272. Stojcevski, F; Hilditch, T; Henderson, L (2018), A modern account of Iosipescu testing, Composites part A: applied science and manufacturing, Vol. 107, PP. 545-554, Elsevier.

273. Stojcevski, F; Randall, J; Henderson, L (2018), Using variable interfacial adhesion characteristics within a composite to improve flexural strength and decrease fiber volume, Composites science and technology, Vol. 165, PP. 250-258, Elsevier.

265. Soulsby, L; Hayne, D; Doeven, E; Wilson, D; Agugiaro, J; Connell, T; Chen, L; Hogan, C; Kerr, E; Adcock, J; Donnelly, P; White, J; Francis, P (2018), Mixed annihilation electrogenerated chemiluminescence of iridium(iii) complexes, Physical chemistry chemical physics, Vol. 20, NO. 28, PP. 18995-19006, Royal Society of Chemistry.

274. Subianto S, Balu R, de Campo L, Sokolova A, Dutta NK, Choudhury NR (2018) Sulfonated Thiophene Derivative Stabilized Aqueous Poly(3hexylthiophene):Phenyl-C61-butyric Acid Methyl Ester Nanoparticle Dispersion for Organic Solar Cell Applications. ACS Appl Mater Interfaces, Vol. 10, PP. 44116-44125.

266. Souza, P; Beladi, H; Singh, R; Hodgson, P; Rolfe, B (2018), An analysis on the constitutive models for forging of Ti6Al4V alloy considering the softening behavior, Journal of Materials Engineering and Performance, PP. 1-14, Springer US.

275. Sultan, A; Hughes, Z; Walsh, T (2018), Effect of calcium ions on peptide adsorption at the aqueous rutile titania (110) interface, Biointerphases, Vol. 13, NO. 6, AIP Publishing.

deakin.edu.au/ifm

276. Sultana, I; Rahman, M; Chen, Y; Glushenkov, A (2018), Potassium-ion battery anode materials operating through the alloying-dealloying reaction mechanism, Advanced functional materials, Vol. 28, NO. 5, PP. 1-18, John Wiley & Sons.

286. Tao J, Tang B, Li P, He D, Liao L, Peng Z, Wang X (2018) Natural rubber particle modified fabrics with catalytic activity and hydrophobicity, Composites Science and Technology, Vol. 162, PP. 123-130, Elsevier.

277. Sun, D; Hussain, H; Yi, Z; Rookes, J; Kong, L; Cahill, D (2018), Delivery of abscisic acid to plants using glutathione responsive mesoporous silica nanoparticles, Journal of nanoscience and nanotechnology, Vol. 18, NO. 3, PP. 1615-1625, American Scientific Publishers.

287. Toth, L; Haase, C; Allen, R; Lapovok, R; Molodov, D; Cherkaoui, M; Kadiri, H (2018), Modeling the effect of primary and secondary twinning on texture evolution during severe plastic deformation of a twinning-induced plasticity steel, Materials, Vol. 11, NO. 5, MDPI.

278. Sun, F; Du, Z; Naebe, M (2018), Determination of model parameters for predicting handle characteristics of wool-rich suiting woven fabrics based on the Wool HandleMeter and KES-F, Journal of the textiles institute, Vol. 109, NO. 2, PP. 147-159, Taylor and Francis.

288. Tu, T; Dobson, E; Henderson, L; Barrow, C; Adcock, J (2018), Soy flour as an alternative to purified lipoxygenase for the enzymatic synthesis of resolvin analogues, New biotechnology, Vol. 41, PP. 25-33, Elsevier.

279. Taheri, A; MacFarlane, D; Pozo-Gonzalo, C; Pringle, J (2018), Flexible and non-volatile redox active quasi-solid state ionic liquid based electrolytes for thermal energy harvesting, Sustainable energy & fuels, Vol. 2, NO. 8, PP. 1806-1812, Royal Society of Chemistry.

280. Taheri, A; MacFarlane, D; Pozo-Gonzalo, C; Pringle, J (2018), Quasi-solid-state electrolytes for low-grade thermal energy harvesting using a cobalt redox couple, ChemSusChem, Vol. 11, NO. 16, PP. 2788-2796, Wiley.

289. Vahid, A; Hodgson, P; Li, Y (2018), Effect of highenergy ball milling on mechanical properties of the Mg-Nb composites fabricated through powder metallurgy process, Advanced Engineering Materials, Vol. 20, NO. 3, Wiley - VCH Verlag GmbH & Co. KGaA. 290. Vahid, A; Rana, S; Gupta, S; Vellanki, P; Venkatesh, S; Dorin, T (2018), New bayesian-optimizationbased design of high-strength 7xxx-series alloys from recycled aluminum, JOM, Vol. 70, NO. 11, PP. 2704-2709, Springer.

281. Tan, H; Santa Maria, P; Wijesinghe, P; Francis Kennedy, B; Allardyce, B; Eikelboom, R; Atlas, M; Dilley, R (2018), Optical coherence tomography of the tympanic membrane and middle ear: a review, Otolaryngology - Head and neck surgery, Vol. 159, NO. 3, PP. 424-438, Sage.

291. Van Amber, R; Rajkhowa, R; Remadevi, R; Barooah, D; Naebe, M (2018), Understanding Morphology, next to Skin Comfort, and Change of Properties during Washing of Knitted Blends of Eri Silk, Journal of Textile and Apparel, Technology and Management, Vol. 10, NO. 4, Dept. of Textile and Apparel, Technology and Management.

282. Tang, B; Liu, J; Fan, L; Li, D; Chen, X; Zhou, J; Li, J (2018), Green preparation of gold nanoparticles with Tremella fuciformis for surface enhanced Raman scattering sensing, Applied surface science, Vol. 427, PP. 210-218, Elsevier.

292. Vanangamudi, A; DumĂŠe, L; Duke, M; Yang, X (2018), Dual functional ultrafiltration membranes with enzymatic digestion and thermo-responsivity for protein self-cleaning, Membranes, Vol. 8, NO. 3, PP. 1-15, MDPI.

283. Tang, B; Yao, Y; Chen, W; Chen, X; Zou, F; Wang, X (2018), Kinetics of dyeing natural protein fibers with silver nanoparticles, Dyes and pigments, Vol. 148, PP. 224-235, Elsevier.

293. Vanangamudi, A; Saeki, D; DumĂŠe, L; Duke, M; Vasiljevic, T; Matsuyama, H; Yang, X (2018), Surface-engineered biocatalytic composite membranes for reduced protein fouling and self-cleaning, Applied materials & interfaces, Vol. 10, NO. 32, PP. 27477-27487, American Chemical Society.

284. Tao, J; Tang, B; Li, P; He, D; Liao, L; Peng, Z; Wang, X (2018), Natural rubber particle modified fabrics with catalytic activity and hydrophobicity, Composites Science and Technology, Vol. 162, PP. 123-130, Elsevier.

285. Tao, T; Lu, S; Chen, Y (2018) A review of advanced flexible lithium-ion batteries, Advanced materials technologies, Vol. 3, NO. 9, PP. 1-21, John Wiley & Sons.

39

Publications - continued 294. Varma, A; Gokhale, A; Jain, J; Hariharan, K; Cizek, P; Barnett, M (2018), Investigation of stress relaxation mechanisms for ductility improvement in SS316L, Philosophical magazine, Vol. 98, NO. 3, PP. 165-181, Taylor & Francis.

295. Varma, R; Kada, S; Barnett, M (2018), Effect of magnesium and silver doping on the thermoelectric performance of cast Mg2Sn alloys, Journal of alloys and compounds, Vol. 757, PP. 142-149, Elsevier.

296. Verde-Sesto, E; Goujon, N; Sardon, H; Ruiz, P; Huynh, T; Elizalde, F; Mecerreyes, D; Forsyth, M; O'Dell, L (2018), DNP NMR studies of crystalline polymer domains by copolymerization with nitroxide radical monomers, Macromolecules, Vol. 51, NO. 20, PP. 8046-8053, ACS Publications.

297. Wang, H; Wang, J; Tong, Z; Hodgson, P; Wan, X; Wu, K; Wei, R; Timokhina, I (2018), Characterization of Nb interface segregation during welding thermal cycle in microalloyed steel by atom probe tomography, Metallurgical and materials transactions A, Vol. 49, NO. 12, PP. 6224-6230, Springer.

298. Wang, H; Wang, W; Wang, H; Jin, X; Li, J; Wang, H; Zhou, H; Niu, H; Lin, T (2018), Pore size effect on one-way water-transport cotton fabrics, Applied surface science, Vol. 455, PP. 924-930, Elsevier.

299. Wang, H; Zhou, H; Wei, X; Niu, H; Lin, T (2018), Highly permeable, directional water transport cotton fabrics, Advanced materials interfaces, Vol. 5, NO. 19, PP. 1-7, John Wiley & Sons.

300. Wang HH, Wang J, Tong Z, Hodgson PD, Wan XL, Wu KM, Wei R, Timokhina I (2018) Characterization of Nb interface segregation during welding thermal cycle in microalloyed steel by atom probe tomography. Metallurgical and materials transactions A, PP. 6224-6230, Springer.

40

303. Wang, J; Li, Q; Liu, D; Chen, C; Chen, Z; Hao, J; Li, Y; Zhang, J; Naebe, M; Lei, W (2018), High temperature thermally conductive nanocomposite textile by "green" electrospinning, Nanoscale, Vol. 10, NO. 35, PP. 16868-16872, Royal Society of Chemistry.

304. Wang, J; Lu, X; Wang, J; Wang, X (2018), Quantitative and sensory evaluation of odor retention on polyester/wool blends, Textile Research Journal, Sage.

305. Wang, J; Wu, Y; Xue, Y; Liu, D; Wang, X; Hu, X; Bando, Y; Lei, W (2018), Super-compatible functional boron nitride nanosheets/polymer films with excellent mechanical properties and ultra-high thermal conductivity for thermal management, Journal of materials chemistry C, Vol. 6, NO. 6, PP. 1363-1369, Royal Society of Chemistry.

306. Wang, K; Varela, F; Tan, M (2018), An array of multielectrodes for locating, visualizing, and quantifying stray current corrosion, Corrosion, Vol. 74, NO. 10, PP. 1093-1101, NACE International.

307. Wang L, Xie L, Zhang LC, Chen L, Ding Z, Lv Y, Zhang W, Lu W, Zhang D (2018) Microstructure evolution and superelasticity of layer-like NiTiNb porous metal prepared by eutectic reaction, Acta materialia, Vol. 143, PP. 214-226, Elsevier.

308. Wang, W; Liu, Y; Jin, X; Xiao, C; Zhu, Z; Lin, T (2018), Effect of polypyrrole modified carbon fiber on interfacial property of composite PPy-carbon fiber/epoxy, Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, Vol. 32, NO. 3, PP. 209-215.

309. Wang, W; Wang, H; Jin, X; Wang, H; Lin, T; Zhu, Z (2018), Effects of hydrogen bonding on starch granule dissolution, spinnability of starch solution, and properties of electrospun starch fibers, Polymer, Vol. 153, PP. 643-652, Elsevier.

301. Wang, J; Chen, X; Reis, R; Chen, Z; Milne, N; Winther-Jensen, B; Kong, L; DumĂŠe, L (2018), Plasma modification and synthesis of membrane materials-a mechanistic review, Membranes, Vol. 8, NO. 3, PP. 1-38, MDPI.

310. Wang, W; Yu, Y; Guo, J; An, Q; Gong, Y; Guo, Q (2018), Static miscible vapor environment controlled honeycombed morphology in polystyrene-poly(methyl methacrylate) films, Polymer, Vol. 153, PP. 161-166, Elsevier.

302. Wang, J; Hodgson, P; Bikmukhametov, I; Miller, M; Timokhina, I (2018), Effects of hot-deformation on grain boundary precipitation and segregation in Ti-Mo microalloyed steels, Materials and design, Vol. 141, PP. 48-56, Elsevier.

311. Wang, Y; Fang, Z; Zhao, S; Ng, D; Zhang, J; Xie, Z (2018), Dopamine incorporating forward osmosis membranes with enhanced selectivity and antifouling properties, RSC advances, Vol. 8, NO. 40, PP. 22469-22481, Royal Society of Chemistry.

deakin.edu.au/ifm

312. Wang Y, Wang L, Ma Z, Gao L, Yin X, Song A, Qin X, Shao G, Gao W (2018) 3D-structured carboncoated MnO/graphene nanocomposites with exceptional electrochemical performance for Li-ion battery anodes. Journal of Solid State Electrochemistry, PP. 2977-2987, Springer.

313. Wang, Z; Lynch, P; Kada, S; Armstrong, N; Motlagh, E; Kimpton, J; Barnett, M (2018), A high-resolution synchrotron-based diffraction technique for in situ characterization of deformation behaviour in magnesium alloys, Journal of applied crystallography, Vol. 51, NO. 4, PP. 1082-1093, John Wiley & Sons.

314. Wang, Z; Qin, S; Seyedin, S; Zhang, J; Wang, J; Levitt, A; Li, N; Haines, C; Ovalle-Robles, R; Lei, W; Gogotsi, Y; Baughman, R; Razal, J (2018), Highperformance biscrolled MXene/carbon nanotube yarn supercapacitors, Small, Vol. 14, NO. 37, PP. 1-9, John Wiley & Sons.

315. Wang, Z; Wu, Y; Luo, P; Tian, Y; Lin, Y; Guo, Q (2018), Poly (sodium p-styrene sulfonate) modified Fe3O4 nanoparticles as effective additives in water-based drilling fluids, Journal of petroleum science and engineering, Vol. 165, PP. 786-797, Elsevier.

316. Wei L, Zhang Y, Chen S, Zhu L, Liu X, Kong L, Wang L (2018) Synthesis of nitrogen-doped carbon nanotubes-FePO4 composite from phosphate residue and its application as effective Fentonlike catalyst for dye degradation, Journal of environmental sciences.

317. Wei, X; Chen, F; Wang, H; Zhou, H; Ji, Z; Lin, T (2018), Efficient removal of aerosol oil-mists using superoleophobic filters, Journal of materials chemistry A, Vol. 6, NO. 3, PP. 871-877, Royal Society of Chemistry.

318. Weimin, K; Lanlan, F; Nanping, D; Huijuan, Z; Li, Q; Naebe, M; Yan, J; Bowen, C (2018), Sulfurembedded porous carbon nanofiber composites for high stability lithium-sulfur batteries, Chemical engineering journal, Vol. 333, PP. 185-190, Elsevier.

319. Weiss, M; Abeyrathna, B; Pereira, M (2018), Roll formability of aluminium foam sandwich panels, International journal of advanced manufacturing technology, Vol. 97, NO. 1-4, PP. 953-965, Springer.

320. Weiss, M; Mester, K; Taylor, A; Stanford, N (2018), A critical assessment of deformation twinning and epsilon martensite formation in austenitic alloys during complex forming operations, Materials characterization, Vol. 145, PP. 423-434, Elsevier.

321. Wu, Y; Guo, M; Liu, G; Xue, S; Xia, Y; Liu, D; Lei, W (2018), Surface modification of boron nitride nanosheets by polyelectrolytes via atom transfer radical polymerization, Materials Research Express, Vol. 5, NO. 4, IOP Publishing (formerly Institute of Physics Publishing).

322. Xiao, N., Hodgson, P., Rolfe, B., Li, D (2018) Modelling discontinuous dynamic recrystallization using a quantitative multi-order-parameter phasefield method, Computational Materials Science, Vol. 155, PP. 298-311.

323. Xiong, J; Manjaiah, G; Fabijanic, D; Forsyth, M; Tan, M (2018), Enhancing the localised corrosion resistance of 316L stainless steel via FBR-CVD chromising treatment, Corrosion Engineering Science and Technology, Vol. 53, NO. 2, PP. 114-121, Taylor & Francis.

324. Xu, Z; Song, P; Zhang, J; Guo, Q; Mai, Y-W (2018), Epoxy nanocomposites simultaneously strengthened and toughened by hybridization with graphene oxide and block ionomer, Composites science and technology, Vol. 168, PP. 363-370, Elsevier.

325. Xue S, Wu Y, Guo M, Liu D, Zhang T, Lei W (2018) Fabrication of Poly(acrylic acid)/Boron Nitride Composite Hydrogels with Excellent Mechanical Properties and Rapid Self-Healing Through Hierarchically Physical Interactions, Nanoscale Res Lett, Vol. 13, P. 393.

326. Xue, S; Wu, Y; Wang, J; Guo, M; Liu, D; Lei, W (2018), Boron nitride nanosheets/PNIPAM hydrogels with improved thermo-responsive performance, Materials, Vol. 11, NO. 7, PP. 1-9, MDPI. 327. Yadav, R; Goud, R; Dutta, A; Wang, X; Naebe, M; Kandasubramanian, B (2018), Biomimicking of hierarchal molluscan shell structure via layer by layer 3D printing, Industrial and engineering chemistry research, Vol. 57, NO. 32, PP. 10832-10840, ACS Publications.

328. Yan, F; Liu, L; Walsh, T; Gong, Y; El-Khoury, P; Zhang, Y; Zhu, Z; De Yoreo, J; Engelhard, M; Zhang, X; Chen, C-L (2018), Controlled synthesis of highly-branched plasmonic gold nanoparticles through peptoid engineering, Nature communications, Vol. 9, NO. 1, Nature Publishing Group.

41

Publications - continued 329. Yan, G; Niu, H; Zhou, H; Wang, H; Shao, H; Zhao, X; Lin, T (2018), Electro-aerodynamic field aided needleless electrospinning, Nanotechnology, Vol. 29, NO. 23, IOP Publishing.

330. Yang, C; Chen, Y; Liu, D; Chen, C; Wang, J; Fan, Y; Huang, S; Lei, W (2018), Nanocavity-in-multiple nanogap plasmonic coupling effects from vertical sandwich-like Au@Al2O3@Au arrays for surfaceenhanced raman scattering, ACS Applied materials and interfaces, Vol. 10, NO. 9, PP. 8317-8323, ACS Publications.

331. Yang, C; Chen, Y; Liu, D; Wang, J; Chen, C; Wang, J; Fan, Y; Huang, S; Lei, W (2018), Vertically aligned AlOOH nanosheets on Al foils as flexible and reusable substrates for NH3 adsorption, Frontiers of physics, Vol. 13, NO. 4, PP. 138101-1-138101-6, Springer.

332. Yang, C; Wang, J; Chen, Y; Liu, D; Huang, S; Lei, W (2018), One-step template-free synthesis of 3D functionalized flower-like boron nitride nanosheets for NH3 and CO2 adsorption, Nanoscale, Vol. 10, NO. 23, PP. 10979-10985, Royal Society of Chemistry.

333. Yang, M; Fu, C; Xia, Z; Cheng, D; Cai, G; Tang, B; Wang, X (2018), Conductive and durable CNTcotton ring spun yarns, Cellulose, Vol. 25, NO. 7, PP. 4239-4249, Springer.

334. Yang, M; Pan, J; Xu, A; Luo, L; Cheng, D; Cai, G; Wang, J; Tang, B; Wang, X (2018), Conductive cotton fabrics for motion sensing and heating applications, Polymers, Vol. 10, NO. 6, PP. 1-12, MDPI. 335. Yang, T; Liang, J; Sultana, I; Rahman, M; Monteiro, M; Chen, Y; Shao, Z; Silva, S; Liu, J (2018), Formation of hollow MoS¿/carbon microspheres for high capacity and high rate reversible alkali-ion storage, Journal of materials chemistry A, Vol. 6, NO. 18, PP. 8280-8288, Royal Society of Chemistry.

336. Yi Z, Merenda A, Kong L, Radenovic A, Majumder M, Dumée LF (2018) Single step synthesis of Schottky-like hybrid graphene - titania interfaces for efficient photocatalysis, Scientific reports, Vol. 8, Nature Publishing Group.

337. Yoganantharajah, P; Ray, A; Eyckens, D; Henderson, L; Gibert, Y (2018), Comparison of solvate ionic liquids and DMSO as an in vivo delivery and storage media for small molecular therapeutics, BMC biotechnology, Vol. 18, PP. 1-7, BioMed Central.

42

deakin.edu.au/ifm

338. Yu, B; Tao, T; Mateti, S; Lu, S; Chen, Y (2018), Nanoflake arrays of lithiophilic metal oxides for the ultra-stable anodes of lithium-metal batteries, Advanced functional materials, Vol. 28, NO. 36, PP. 1-9, John Wiley & Sons.

339. Yu, X; Zhang, Y; Jin, L; Chen, J; Jiang, Z; Zhang, Y (2018), High-performance piezo-damping materials based on CNTs/BaTiO3/ F-PAEK-b-PDMS under high temperature steam conditions, Applied surface science, Vol. 452, PP. 429-436, Elsevier.

340. Yunis, R; Girard, G; Wang, X; Zhu, H; Bhattacharyya, A; Howlett, P; MacFarlane, D; Forsyth, M (2018), The anion effect in ternary electrolyte systems using poly(diallyldimethylammonium) and phosphonium-based ionic liquid with high lithium salt concentration, Solid State Ionics, Vol. 327, PP. 83-92, Elsevier.

341. Yunis, R; Newbegin, T; Hollenkamp, A; Pringle, J (2018), Ionic liquids and plastic crystals with a symmetrical pyrrolidinium cation, Materials chemistry frontiers, Vol. 2, NO. 6, PP. 1207-1214, Royal Society of Chemistry.

342. Zabihi, O; Ahmadi, M; Nikafshar, S; Chandrakumar Preyeswary, K; Naebe, M (2018), A technical review on epoxy-clay nanocomposites: structure, properties, and their applications in fiber reinforced composites, Composites part B: engineering, Vol. 135, PP. 1-24, Elsevier.

343. Zaidi, B; Zhang, J; Magniez, K; Gu, H; Miao, M (2018), Optimizing twisted yarn structure for natural fiber-reinforced polymeric composites, Journal of composite materials, Vol. 52, NO. 3, PP. 373-381, SAGE Publications.

344. Zhan K, Wu Y, Li J, Zhao B, Yan Y, Xie L, Wang L, Ji V (2018) Investigation on surface layer characteristics of shot peened graphene reinforced Al composite by X-ray diffraction method, Applied surface science, Vol. 435, PP. 1257-1264.

345. Zhan, Y; He, S; Wan, X; Zhang, J; Liu, B; Wang, J; Li, Z (2018), Easy-handling bamboo-like polypyrrole nanofibrous mats with high adsorption capacity for hexavalent chromium removal, Journal of colloid and interface science, Vol. 529, PP. 385-395, Elsevier.

346. Zhang, B; Zavabeti, A; Chrimes, A; Haque, F; O'Dell, L; Khan, H; Syed, N; Datta, R; Wang, Y; Chesman, A; Daeneke, T; Kalantar-zadeh, K; Ou, J (2018), Degenerately hydrogen doped molybdenum oxide nanodisks for ultrasensitive plasmonic biosensing, Advanced functional materials, Vol. 28, NO. 11, PP. 1-13, John Wiley & Sons.

347. Zhang, C; Li, C; Wang, L; Feng, L; Lin, T (2018), Dual effects of compatibilizer on the formation of oriented ribbon-like dispersed phase domains in polystyrene/polyamide 6 blends, Chemical engineering science, Vol. 178, PP. 146-156, Elsevier.

348. Zhang, J; Allardyce, B; Rajkhowa, R; Zhao, Y; Dilley, R; Redmond, S; Wang, X; Liu, X (2018), 3D printing of silk particle-reinforced chitosan hydrogel structures and their properties, ACS biomaterials science and engineering, Vol. 4, NO. 8, PP. 3036-3046, American Chemical Society.

349. Zhang, J; Lei, W; Chen, J; Liu, D; Tang, B; Li, J; Wang, X (2018), Enhancing the thermal and mechanical properties of polyvinyl alcohol (PVA) with boron nitride nanosheets and cellulose nanocrystals, Polymer, Vol. 148, PP. 101-108, Elsevier.

350. Zhang, J; Xie, Z; Hill, A; Cong, W; She, F; Gao, W; Hoang, M; Kong, L (2018), Effects of a volatile solvent with low surface tension combining with the silica network reinforcement on retention of LLC structure in polymer matrix, Polymer bulletin, Vol. 75, NO. 2, PP. 581-595, Springer.

351. Zhang, K-X; Su, H; Wang, H-H; Zhang, J-J; Zhao, S-Y; Lei, W; Wei, X; Li, X-H; Chen, J-S (2018), Atomicscale Mott-Schottky heterojunctions of boron nitride monolayer and graphene as metal-free photocatalysts for artificial photosynthesis, Advanced science, Vol. 5, NO. 7, PP. 1-8, Wiley.

352. Zhang, L; Jia, Y; He, H; Yin, J; Chen, R; Zhang, C; Shen, W; Wang, X (2018), Multiple factor analysis on preparation of cellulose nanofiber by ball milling from softwood pulp, Bioresources, Vol. 13, NO. 2, PP. 2397-2410, Dept. of Wood and Paper Science, College of Natural Resources, North Carolina State University.

353. Zhang, Q; Gou, S; Zhao, L; Fei, Y; Zhou, L; Li, S; Wu, Y; Guo, Q (2018), Solution behavior of watersoluble poly(acrylamide-co-sulfobetaine) with intensive antisalt performance as an enhanced oil-recovery chemical, Journal of Applied Polymer Science, Vol. 135, NO. 19, John Wiley & Sons.

354. Zhang R, He X, Rodrigues AM, Guo Q (2018) Softening dynamics of polymer blends and composites investigated by differentia spectra of dynamic mechanical analysis, Advances in polymer technology, Vol. 37, PP. 2504-2509, John Wiley & Sons.

355. Zhang, Y; Ortiz-Vitoriano, N; Acebedo, B; O'Dell, L; Macfarlane, D; Rojo, T; Forsyth, M; Howlett, P; Pozo-Gonzalo, C (2018), Elucidating the impact of sodium salt concentration on the cathodeelectrolyte interface of Na-Air batteries, Journal of physical chemistry C, Vol. 122, NO. 27, PP. 15276-15286, American Chemical Society.

356. Zhang, Y; Pozo-Gonzalo, C (2018), Variations and applications of the oxygen reduction reaction in ionic liquids, Chemical communications, Vol. 54, NO. 31, PP. 3800-3810, Royal Society of Chemistry.

357. Zhang, Y; Yi, Z; Wang, J; Wei, L; Kong, L; Wang, L (2018), Sub-50Ă‚Âżnm amorphous iron phosphate dihydrate nanoplates fabricated via liquid exfoliation from recycled steelmaking phosphate slag, Materials letters, Vol. 233, PP. 290-293, Elsevier.

358. Zhang Y, Yi Z, Wei L, Kong L, Wang L (2018) Modified iron phosphate/polyvinyl alcohol composite film for controlled-release fertilisers, RSC advances, Vol. 8, PP. 18146-18152, Royal Society of Chemistry.

359. Zhao, H; Deng, N; Yan, J; Kang, W; Ju, J; Ruan, Y; Wang, X; Zhuang, X; Li, Q; Cheng, B (2018), A review on anode for lithium-sulfur batteries: progress and prospects, Chemical engineering journal, Vol. 347, PP. 343-365, Elsevier.

360. Zhao, J; Han, P; Quan, Q; Shan, Y; Zhang, T; Wang, J; Xiao, C (2018), A convenient oil-water separator from polybutylmethacrylate/graphenedeposited polyethylene terephthalate nonwoven fabricated by a facile coating method, Progress in organic coatings, Vol. 115, PP. 181-187, Elsevier.

361. Zheng, S; Lei, W; Qin, J; Wu, Z; Zhou, F; Wang, S; Shi, X; Sun, C; Chen, Y; Bao, X (2018), All-solid-state high-energy planar asymmetric supercapacitors based on all-in-one monolithic film using boron nitride nanosheets as separator, Energy storage materials, Vol. 10, PP. 24-31, Elsevier.

43

Publications - continued 362. Zhou, H; Wang, H; Yang, W; Niu, H; Wei, X; Fu, S; Liu, S; Shao, H; Lin, T (2018), Durable superoleophobic-superhydrophilic fabrics with high anti-oil-fouling property, RSC advances, Vol. 8, NO. 47, PP. 26939-26947, Royal Society of Chemistry.

369. Zhu, H; Wang, X; Vijayaraghava, R; Zhou, Y; MacFarlane, D; Forsyth, M (2018), Structure and ion dynamics in imidazolium-based protic organic ionic plastic crystals, Journal of physical chemistry letters, Vol. 9, NO. 14, PP. 3904-3909, ACS Publications.

363. Zhou H, Wang H, Niu H, Lin T (2018) Recent progress in durable and self-healing supernonwettable fabrics, Advanced materials interfaces, Vol. 5, Elsevier.

370. Zhu, L; Naebe, M; Blanchonette, I; Wang, X (2018), Mechanical properties of bifacial fabrics, Textile research journal, Vol. 88, NO. 12, PP. 1335-1344, Sage Publications.

364. Zhou, X; Zhao, Z; He, Y; Ye, Y; Zhou, J; Zhang, J; Ouyang, Q; Tang, B; Wang, X (2018), Photoinduced synthesis of gold nanoparticle-bacterial cellulose nanocomposite and its application for in-situ detection of trace concentration of dyes in textile and paper, Cellulose, Vol. 25, NO. 7, PP. 3941-3953, Springer.

371. Zhu, L; Wang, X; Hinestroza, J; Naebe, M (2018), Determination of the porosity in a bifacial fabric using micro-computed tomography and threedimensional reconstruction, Textile research journal, Vol. 88, NO. 11, PP. 1263-1277, Sage.

365. Zhou, Y; Fang, J; Wang, H; Zhou, H; Yan, G; Zhao, Y; Dai, L; Lin, T (2018), Multicolor electrochromic fibers with helix-patterned electrodes, Advanced electronic materials, Vol. 4, NO. 5, PP. 1-8, John Wiley & Sons.

366. Zhou, Y; Wang, X; Zhu, H; Armand, M; Forsyth, M; Greene, G; Pringle, J; Howlett, P (2018), Ternary lithium-salt organic ionic plastic crystal polymer composite electrolytes for high voltage, all-solidstate batteries, Energy storage materials, Vol. 15, PP. 407-414, Elsevier.

367. Zhu B, Duke M, DumĂŠe LF, Merenda A, des Ligneris E, Kong L, Hodgson PD, Gray S (2018) Short Review on Porous Metal Membranes-Fabrication, Commercial Products, and Applications, Membranes, Vol. 8.

368. Zhu B, Zhu J, Wang Y, Rolfe B, Wang Z, Zhang Y (2018) Combined hot stamping and Q&P processing with a hot air partitioning device, Journal of Materials Processing Technology, Vol. 262, PP. 392-402.

44

deakin.edu.au/ifm

372. Zindal, A; Jain, J; Prasad, R; Singh, S; Sarvesha, R; Cizek, P; Barnett, M (2018), Effect of heat treatment variables on the formation of precipitate free zones (PFZs) in Mg-8Al-0.5Zn alloy, Materials characterization, Vol. 136, PP. 175-182, Elsevier.

373. Zong, E; Huang, G; Liu, X; Lei, W; Jiang, S; Ma, Z; Wang, J; Song, P (2018), A lignin-based nanoadsorbent for superfast and highly selective removal of phosphate, Journal of materials chemistry a, Vol. 6, NO. 21, PP. 9971-9983, Royal Society of Chemistry.

374. Zou, F; Zhou, J; Zhang, J; Li, J; Tang, B; Chen, W; Wang, J; Wang, X (2018), Functionalization of silk with in-situ synthesized platinum nanoparticles, Materials, Vol. 11, NO. 10, MDPI AG. 375. Zou, Z; Wu, J; Liu, X; Hurren, C (2018), Char production using waste fibers from dehairing processes, Journal of the Textile Institute, Vol. 109, NO. 12, PP. 1529-1535, Taylor & Francis.

Conference Papers 1.

Barnett, M; Wang, H (2018), Interaction between propagating twins and non-shearable precipitates in magnesium alloys, in Orlov D; Joshi V; Solanki KN; Neelameggham NR, Minerals, Metals & Materials Society. Symposium (147th: 2018: Phoenix, Ariz.), PP. 365-367, Springer.

2.

Catubig RA, Somers AE, Neil WC, McAdam G, Yunis R, Forsyth M (2018) Corrosion inhibition of a polyurethane-based coating defect with lanthanum or imidazolinium 4-hydroxycinnamate.

Paper 27, Corrosion and Prevention 2018.

3.

Chandrasekharan Nair Remadevi R (2018) Sustainable approach for colouration of acrylic fibres using waste alpaca fibres. The Second International Forum on Textiles for Graduate Students' (IFTGS). Tianjin, China.

4.

Chia, J; McRae, J; Enjapoori, A; Lefevre, C; Kukuljan, S; Dwyer, K (2018), Dietary cows' milk protein A1 beta-casein increases the incidence of T1D in NOD mice, Nutrients, Vol. 10, NO. 9, MDPI Publishing.

5.

Choo, X; Liddell, J; Huuskonen, M; Grubman, A; Moujalled, D; Roberts, J; Kysenius, K; Patten, L; Quek, H; Oikari, L; Duncan, C; James, S; Mcinnes, L; Hayne, D; Donnelly, P; Pollari, E; Vahatalo, S; Lejavova, K; Kettunen, M; Malm, T; Koistinaho, J; White, A; Kanninen, K (2018), Cull(atsm) attenuates neuroinflammation, Frontiers in neuroscience, Vol. 12, PP. 1-14, Frontiers.

6.

Corva, D; Hosseini, S; Adams, S; Gates, W; Collins, F; Kouzani, A (2018), A miniature device for in-situ measurement of concrete corrosion, IEEE Mechatronics and Automation. International conference (2018 : Changchun, China), PP. 2185-2190, IEEE.

7.

Deole AD, Barnett M, Weiss M (2018) ESAFORM 2018: Analysis of fracture in sheet bending and roll forming. Proceedings of the European Scientific Association for Material Forming Conference, Palermo, Italy, Vol. 1960.

8.

DĂŠr, A; Kaluza, A; Kurle, D; Herrmann, C; Kara, S; Varley, R (2018), Life cycle engineering of carbon fibres for lightweight structures, in Laurent A; Leclerc A; Niero M; Dong Y; Olsen S; Owsianiak M; Hauschild M, CIRP Life Cycle Engineering.

Conference (2018: 25th: Copenhagen, Denmark), PP. 43-48, Elsevier.

9.

Dick, R; Lou, Y; Zhang, S; Yoon, J (2018), Material characterization and fracture prediction with advanced constitutive model and Polar EPS fracture diagram for AA 3104-H19, Numerical Simulation of 3D Sheet Metal Forming Processes.

Conference and Workshop (2018: 11th: Tokyo, Japan), PP. 1-6, IOP Publishing.

10. Dorin, T; Ramajayam, M; Mester, K; Rouxel, B; Lamb, J; Langan, T (2018), The effect of scandium and zirconium on the microstructure, mechanical properties and formability of a model Al-Cu alloy, in Martin O, The Minerals, Metals & Materials Society. Annual Meeting & Exhibition (147th: 2018: Phoenix, Ariz.), PP. 1595-1599, Springer.

11. Du Y, Xu J, Lin T (2018) Single-walled Carbon Nanotube / Polypyrrole Thermoelectric Composite Materials, IOP Conference Series: Earth and Environmental Science, Vol. 108.

12. Eyckens, D; Henderson, L (2018), Solvate ionic liquids as green alternatives for molecular solvents, American Chemical Society. National Meeting and Exposition (2018: 255th: New Orleans, Louisiana), PP. 1-1, American Chemical Society.

13. Fang J, Lang C, Shao H, Lin T (2018) Acoustoelectric conversion properties of electrospun nanofiber webs, Fiber Society 2018 Spring Conference: Fibers and Textiles for Value Creation in Connected Industries.

14. Faruque, M; Remadevi, R; Haque, A; Razal, J; Wang, X; Naebe, M (2018), Sustainable approach for colouration of acrylic fibres using waste alpaca fibres, in The Second International Forum on Textiles for Graduate Students' (IFTGS). Tianjin Polytechnic University, China, PP. 549-552.

15. Fehervari, A; MacLeod, A; Oliari Garcez, E; Gates, W; Collins, F (2018), Rheological behaviour of concrete enriched with carbon nanofillers, Australasian Structural Engineering. Conference.

(2018: Adelaide, South Australia), PP. 1-8, Engineers Australia.

16. Fu S, Zhou H, Wang H, Lin T (2018) Waterborne fabrication of fluoride-free, magnetic, superhydrophobic fabrics, Fiber Society 2018 Spring Conference: Fibers and Textiles for Value Creation in Connected Industries.

45

Publications - continued 17. Hadley A, Notthoff C, Mota-Santiago P, Hossain UH, Mudie S, Toimil-Molares ME, Trautmann C, Kluth P. (2018) Conical etched ion tracks in SiO2 characterised by small angle X-ray scattering. Nuclear Inst. and Methods in Physics Research, B, Volume 435, PP. 133-136, Elsevier.

25. Lou Y, Yoon JW (2018) Extension of the DF2016 isotropic model into an anisotropic ductile fracture criterion. NUMISHEET 2018: Proceedings of the 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan.

18. Henderson, L; Servinis, L; Randall, J; Arnold, C (2018), Modifying the surface of carbon fiber for fiber-to-matrix adhesion, American Chemical Society. National Meeting and Exposition (2018: 255th: New Orleans, Louisiana), PP. 1-1, American Chemical Society.

26. Mahawish A, Bouazza A, Gates WP (2018) Improvement of soft soils using bio-cemented sand columns. Springer Series in Geomechanics and Geoengineering, PP. 822-825.

19. Henderson, L; Varley, R; Stojcevski, F; Randall, J; Eyckens, D; Demir, B; Walsh, T (2018), Optimization of carbon fiber surfaces for reinforcement in advanced polymer composites, in Waas A, American Society for Composites. Conference (2018: 33rd: Seattle, Washington), PP. 2492-2498, American Society for Composites.

20. Hodgson P, Sceats M, Majumder K, Hills T, Song Q, Fennel P, Gao R, Tan R, MacFarlane D, Forsyth M, Howlett P (2018) Nano-active electrode materials, Chemistry and Materials for Lead-Based Batteries Symposium 2018, Held at AABC Europe 2018, PP. 445-446.

21. Joosten MW, Alizzi M, Wiles C, Varley RJ (2018) 3D printed continuous fibre composites: Exploiting design flexibility to achieve application specific properties, 33rd Technical Conference of the American Society for Composites 2018, Vol. 5, PP. 2991-3001.

22. Kupke, A; Barnett, M; Luckey, G; Weiss, M (2018), Determination of the bendability of ductile materials, International Deep Drawing Research Group. Conference (2018: 37th: Waterloo, Ontario), PP. 1-10, IOP Publishing.

23. Latino, M; Varela, F; Tan, Y; Forsyth, M (2018), CP permeable coating and corrosion under dibonded coatings, Corrosion and Prevention.

Conference (2018): Adelaide, South Australia), PP. 1-8, Australasian Corrosion Association.

24. Li C, Santu R, Gupta S, Nguyen V, Venkatesh S, Sutti A, De Celis Leal DR, Slezak T, Height M, Mohammed M, Gibson I (2018) Accelerating experimental design by incorporating experimenter hunches, IEEE ICDM 2018: International Conference on Data Mining, Singapore, PP. 257-266.

46

deakin.edu.au/ifm

27. Mester, K; Rouxel, B; Langan, T; Lamb, J; Barnett, M; Dorin, T (2018), Understanding the co-precipitation mechanisms of Al3(Sc, Zr) with strengthening phases in Al-Cu-Li model alloys, Light Metals. Symposium (2018: Phoenix, Arizona), PP. 233-239, Springer.

28. Pradeau, A; Yoon, J; Thuillier, S; Lou, Y; Zhang, S (2018), Rupture model based on non-associated plasticity, Material Forming. Conference (2018: 21st: Palermo, Italy), PP. 1-6, AIP. 29. Rouxel, B; Mester, K; Vahid, A; Lamb, J; Langan, T; Dorin, T (2018), Influence of the AL3(Sc,Zr) dispersoids and the stretching on the natural ageing behavior of a binary Al-4wt%Cu alloys, Minerals, Metals & Materials Society. Conference (147th: 2018: Phoenix, Arizona), PP. 1601-1607, Springer.

30. Shanbhag, V; Rolfe, B; Arunachalam, N; Pereira, M (2018), Understanding the source of acoustic emission signals during the wear of stamping tools, in [Unknown], International Deep Drawing Research Group. Conference (37th: 2018: Waterloo, Ont.), PP. 1-8, IOP Publishing.

31. Tan, Y; Huo, Y (2018), Cathodic protection affected by anodic transients: critical duration and amplitude, NACE Corrosion. Conference and Expo (2018: Phoenix, Arizona), NACE International.

32. Tan, Y; Varela, F; Huo, Y; Mahdavi, F; Wang, K (2018), An overview of recent progresses in acquiring, visualizing and interpreting pipeline corrosion monitoring data, NACE Corrosion.

Conference and Expo (2018: Phoenix, Arizona), NACE International.

33. Usman KAS, Buenviaje SC, Razal JM, Conato MT, Payawan LM (2018) Synthesis and characterization of zinc adeninate metal-organic frameworks (bioMOF1) as potential anti-inflammatory drug delivery material, AIP Conference Proceedings, Vol. 1958.

34. Vahid A, Rana S, Gupta S, Vellanki P, Venkatesh S, Dorin T (2018) Proceedings of the 16th International Aluminum Alloys Conference (ICAA16).

35. Varela, F; Forsyth, M; Tan, Y (2018), Accelerated validation of pipeline corrosion monitoring sensors, Corrosion and Prevention. Conference (2018: Adelaide, South Australia), PP. 1-13, Australasian Corrosion Association.

36. Wang H, Zhou H, Lin T (2018) Highly air-permeable, directional, water-transport cotton fabrics.

Fiber Society 2018 Spring Conference: Fibers and Textiles for Value Creation in Connected Industries.

37. Wang J, Lu X, Wang J, Wang X (2018) Quantitative evaluation of odour retention on different fibre typesFibers and textiles for value creation in connected industries. Proceedings of The Fiber Society 2018 Spring Conference.

38. Wei X, Zhou H, Lin T, Wang H (2018) Improvement of aerosol oil-mist filtration performance through superoleophobic treatment of fibrous filters.

Fiber Society 2018 Spring Conference: Fibers and Textiles for Value Creation in Connected Industries.

39. Zhang, P; Pereira, M; Rolfe, B; Wilkosz, D; Abeyrathna, B; Weiss, M (2018), A new strainbased method to determine GTN parameters for thin stainless steel foil, Numerical Simulation of 3D Sheet Metal Forming Processes. Conference and Workshop (11th: 2018: Tokyo, Japan), PP. 1-6, IOP Publishing.

40. Zhang S, Lou Y, Yoon JW (2018) A new strainbased method to determine GTN parameters for thin stainless steel foil, NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Tokyo, Japan. IOP Publishing, Vol. 1063.

41. Zhang, S; Lou, Y; Yoon, J (2018), Earing prediction of AA 2008-T4 with anisotropic Drucker yield function based on the second and third stress invariants, Numerical Simulation of 3D Sheet Metal Forming Processes. Conference and Workshop (2018: 11th: Tokyo, Japan), PP. 1-6, IOP. 42. Zhang, Y; Hinton, B; Varela, F; Forsyth, M; Tan, M (2018), Understanding the electrochemical processes at the interface of cathodically protected steel pipeline and soil during anodic transients, in Ching JJ; Sook Wai P, Coatings and Corrosion. Symposium (2016: Kuala Lumpur, Malaysia), PP. 517-523, Taylor & Francis.

47

Contact us For further information, please visit the Institute for Frontier Materials website at deakin.edu.au/ifm Email: ifm-enquiries@deakin.edu.au Telephone: +61 3 5247 9255

deakin.edu.au/ifm

Environmental Credentials

FSC速 Certified printers: Monza Recycled contains 99% recycled fibre and is FSC速 Mix Certified, which ensure fibre. Monza Recycled is manufactured by an ISO 14001 certified mill.

Other printers: Monza Recycled contains 99% recycled fibre, and elemental chlorine free pulp which wood of fibre. Monza Recycled is manufactured by an ISO 14001 certified mill.

Spicers Icons

Environmental Credentials

Deakin University CRICOS Provider Code: 00113B

FRANK LANE_13565

Deakin University 75 Pigdons Road Waurn Ponds VIC 3216 Australia

FSC速 Certified printers: Monza Recycled contains 99% recycled fibre and is FSC速 Mix Certified, which ensures that pulp is derived from well-managed forests and recycled wood of fibre. Monza Recycled is manufactured by an ISO 14001 certified mill.

Other printers: Monza Recycled contains 99% recycled fibre, and elemental chlorine free pulp which ensures that pulp is derived from well managed forests and recycled