LIGHTING DESIGN IDEAS
3 QUESTIONS TO PROPERLY TARGET LIGHTING NEEDS:
01 02 03
What is my requirement?
• In what room is it being installed? (Kitchen, bathroom, wardrobe, etc.)
• What area are we lighting up? (Shelf, cupboard, drawer, ceiling, etc.)
How do I control my lighting?
• Wall Switch / Dimmer
• Sensors
• Power supply required
What type of light?
• Pucks
• Linear lighting
• Combination of Both
Kitchens
Closets
Bathrooms
Wall Units
Under
Vertical Lighting
Shelves Lighting
Should be used with door or motion sensors
Contouring mirrors
Toe-Kick or Hovering
Bathroom lighting can be both Practical and Mood setting
Shelves
Closets Rods
Vario Adjustable shelves
Drawers
Offer the capsen hidden switch
Lighting is a great way to enhance a wall unit
Lighting Cut-off
Recessing LED lighting with an angled lens, reduces glare while properly lighting work space
Where lighting is place on a shelve can creates very different effects.
WHAT
YOU NEED DEPENDS ON HOW YOU CONTROL THE LIGHTING
On / Off with wall light switch
direct connection to lights
Select type of lighting
Hardwire option
On / Off wall switch
Non Dimmable power supply
Calculate ports needed
Calculate extensions needed
Wall outlet option
Swidget On / Off with wall switch with optional insert connected directly to lights
Swidget
On/Off wall switch
Select Insert
Hardwire option
USB charger
Non Dimmable power supply
Calculate ports needed
Select type of lighting
Night Light
WiFi adaptor
Wall outlet option
Calculate extensions needed
Motion Sensor
No Wall Switch, Controled only with Tactil or Door (IR) Sensor.
IR Door sensor & On/Off dimmer
Calculate extensions needed
Hardwire option
Select type of lighting
Non Dimmable power supply
Calculate ports needed
Wall outlet option
Tactil On/Off dimmer
Traditional Dimmable Wall Switch
Wall outlets are not allowed to be connected to a dimmer
Sensors cannot be installed on dimmable power supply
Select type of lighting
Wall Dimmer
Hardwire is the only option Dimmable hardwire power supply
Calculate extensions needed
Calculate ports needed
Swidget Dimmable Wall Switch with Wifi or Motion detection modules
Swidget WiFi
Dimmable wall switch:
Select Insert
USB charger
Night Light
WiFi adaptor
Motion Sensor
Sensors cannot be installed on dimmable power supply
Wall outlets are not allowed to be connected to a dimmer
Hardwire is the only option
Dimmable hardwire power supply
Calculate extensions needed
Select type of lighting
Calculate ports needed
(BTRF Smart wall dimmers system)
BTRF dimmer switch, 1 or 2 Zones
Non-dimming
Hardwire
Non-dimming
Plug-in
BTRF receivers one per Zone
Decora face plate
Select type of lighting
Calculate extensions needed
