ENDRES TOOLS - SAFETY FIRST -
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Am Eichholz 12 · D-42897 Remscheid phone +49 (0) 21 91/36 23-0 fax +49 (0) 21 91/34 00-20 Email: info@endres-tools.de www.endres-tools.de
NON-SPARKING TOOLS
GmbH
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Index Seite
Company portrait Representatives worldwide Endres Safety Tools – where to use Material analysis Application advice Little dictionary of the ex-zones
4 4 5 6 6 7
1.
Spanners
9
2.
Special Wrenches
33
3.
Socket sets and accessoires
43
4.
Screwdrivers and hex keys
67
5.
Pliers and Scissors
75
6.
Hammer, Chisel and Punches
83
7.
Knives, Spatulas and Scrapers
97
8.
Brushes and Scrubbers
103
9.
Hatchets, Shovels, Spades, Picks and Forks
107
10. Wedges and Bars
113
11. Other Handtools
119
12. Special Articles
123
13. Flash Lights
129
14. Tool Cases and Tool Sets
137
Technical information Aftertreatment Guarantee Conditions of delivery and sale Index Notes
141 142 142 143 144 148
3
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Introduction of Endres Tools GmbH Endres Tools GmbH was established by Mr. Stephan Endres in 1992 and is specialized in producing Non-sparking tools which are exclusively used in areas where explosion due to sparks can be a potential danger.
The non-sparking Endres tools are winning more and more popularity, because of their high quality, fair prices and the accuracy and prompt carrying-out of all orders. The brand „Endres“ is standing for high quality at fair prices!
Endres tools manufacture all kind of hand tools made of non-sparking material which is a special non-iron-alloy. Endres Tools is a young, innovating company and its success is based on the high quality in all areas. It’s staff professional competence makes up the success of Endres non-sparking tools. Exports are made worldwide and the „Made in Germany“ is liked all over the globe. In most of the countries Endres Tools has been represented by notable traders since many years.
Representatives worldwide
4
Please have a look now into our new catalogue, which has been extended with a lot of new articles. Please go and see for yourself the big supply on different non-sparking tools. If you do not find any article you need, please never hesitate to contact us, because our motto is now as before „Yes we can!“
ENDRES TOOLS
GmbH
- SAFETY FIRST -
ENDRES safety tools ENDRES safety tools are recommended for use in hazardous environments where flammable or combustible vapors, liquids, dusts or residues are present.
in government agencies (local, state and federal) - aircraft and missile plants - armed forces
In the following areas, among others, ENDRES safety tools are recommended:
- Fire Departments - First Responders to Weapons of Mass Destruction (WMD) - munitions depots - nuclear production and waste - Public utlilties - waste management - water treatment facilities
(Army, NAvy, Air Force, Marine, Coast Guard and Civil Support Units)
in manufacturing operations: - alcohol industries - plants for ammunition, missile and explosives - automotive plants (spray booth) - bakeries - breweries and distilleries - chemical industries - metal production - fertilizer plants - flammable materials manufacture - flour mills - furniture manufactures (varnish and painting handling) - gas plants and coke by-products - glass manufactures - insulation manufacture - leather products (tanneries) - mining - nuclear products - oil and natural gas drilling, refining and handling - petrochemicals - petroleum refining - pharmaceutical industry - pipeline construction - plastic manufactures - rubber processing operations - sugar mills - synthetic fiber manufacture - wine industry in transportation industries (including their maintenance, cleaning and service companies)
- airports - railroads - shipyards - tankers - tanker trucks
in other industries - cleaning and spraying operations - confined space maintenance - explosives and pytotechnics - geophysical exploration - grain storage and handling - HAZMAT (= hazardous materials handling) - maintenance and service operations - packing plants - warehousing of all hazardous materials for non-magnetic applications (ONLY tools made of CUBE!) - aircraft maintenance and overhaul - aluminium and other metal smelting - electronics manufactures - hospitals and clinics magnetic resonance imaging - mine sweepers - nuclear products and testing machines - public utilities - radar transmission centers for corrosion resistant applications - boat owners - canners - chemical manufactures - desalinization plants - food product manufactures - insulation manufactures - laboratories - paper mills - petrochemicals - pharmaceutical industry - plastic manufactures - shipyards - wine industry - tankers and other work boats
5
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Analysis of non-sparking material Material
Aluminium-multiSpecialbronze SB „S“ substance-bronze
Copper-Beryllium CuBe „C“
Analysis
Cu
Al
Ni
Fe
Mn
Be
Ni
Co
Cu
min. in %
Rest
8
4
4
–
1,8
0,1
0,4
Rest
max. in %
Rest
10,5
6
5,5
1,33
2,3
0,5
0,7
Rest
Mechanical properties
cured
untreated
Strength N/mm2
780-989
600-670
1117-1326
Yield point N/mm
450-550
250-270
840-880
Hardness
230-290
140-180
280-365
2
Physical properties Magnetic properties
1,35 max.
1,005 max.
Explosion prevention ATEX = ATmosphere Explosible ATEX 137 (118), also called guideline 99/2/EG, is responsible for the safety of persons at commissioning, operation and attendance of explosive plants. Corresponding ATEX 99/92/EC Endres Tools are to be used in Ex-Zones. Since July 2003 only operating material, which conforms to this guideline, is allowed to be placed into circulation.
APPLICATION ADVICE Because of its application methods, non-sparking tools have to be softer than conventional tools. For this reason the use of these tools has to be occurred with special care. Overstraining has to be avoided. The use of non-sparking tools must not be the only preventive measurement in areas of fire and explosion risk. For overall protection of staff and equipping, please follow the instructions of your professional association.
6
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Little dictionary of the ex-zones Zone 0: An atmosphere were a mixture of air and flammable substances in form of gas, vapor or mist is present frequently, continuously or for long periods.
Inertization: The oxygen from the air becomes eliminated by the addition of inert gas (for example argon, nitrogen, carbon dioxide) so that an explosive atmosphere is avoided.
Zone 1: An atmosphere where a mixture of air and flammable substances in form of gas, vapor or mist is likely to occur in normal operation occasionally.
Explosion Atmosphere: Alloy of air and flammable gases, smokes, haze or dusts in atmospherical conditions, in which the combustion process passes on the hole unspent alloy after occurred combustion.
Zone 2: An atmosphere where a mixture of air and flammable substances in form of gas, vapor or mist is not likely to occur in normal operation but, if it does not occur, will persist for only a short period.
Explosive Area: Area, in which the atmosphere can be potentially explosive because of the local and operating relationship.
Zone 20: An atmosphere where a cloud of combustible dust in the air is present frequently, continuously or for long periods.
Normal Operation: Situation which takes place if the assets, protection systems and components reach their destined function within the scope of their design parameter.
Zone 21: An atmosphere where a cloud of combustible dust in the air is likely to occur in normal operation occasionally. Zone 22: An atmosphere where a cloud of combustible dust in the air is not likely to occur in normal operation but, if it does occur, will persist for only a short period.
7
SPANNERS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Double open end wrench – DIN 3110 –
article no
0010607S 0010608S 0010708S 0010709S 0010809S 0010810S 0010910S 0010911S 0011011S 0011012S 0011013S 0011014S 0011113S 0011114S 0011213S 0011214S 0011315S 0011415S 0011416S 0011417S 0011617S 0011618S 0011719S 0011722S 0011819S 0011820S 0011821S 0011922S 0011924S 0012022S 0012123S 0012224S 0012227S 0012326S 0012426S 0012427S 0012430S 0012528S 0012629S 0012729S 0012730S 0012732S 0013032S 0013034S 0013036S 0013234S
10
size mm
6 x 7 6 x 8 7 x 8 7 x 9 8 x 9 8 x 10 9 x 10 9 x 11 10 x 11 10 x 12 10 x 13 10 x 14 11 x 13 11 x 14 12 x 13 12 x 14 13 x 15 14 x 15 14 x 16 14 x 17 16 x 17 16 x 18 17 x 19 17 x 22 18 x 19 18 x 20 18 x 21 19 x 22 19 x 24 20 x 22 21 x 23 22 x 24 22 x 27 23 x 26 24 x 26 24 x 27 24 x 30 25 x 28 26 x 29 27 x 29 27 x 30 27 x 32 30 x 32 30 x 34 30 x 36 32 x 34
length mm
weight g
article no
125 125 125 125 125 125 125 140 140 140 140 160 160 160 160 160 160 160 200 200 200 200 225 225 225 225 225 240 240 240 240 240 270 270 270 270 270 270 270 300 300 300 300 320 320 320
65 65 65 65 65 60 60 90 90 85 80 180 180 180 180 170 170 165 220 220 210 210 350 320 320 310 300 440 420 440 420 420 730 730 730 730 700 700 700 810 800 800 780 1240 1220 1200
0013236S 0013436S 0013538S 0013638S 0013641S 0014146S 0014650S 0015055S 0015060S 0015560S 0016065S 0016570S 0017080S 0017580S
size mm
length mm
weight g
320 320 370 370 370 370 390 440 440 470 470 630 630 630
1140 1100 1480 1480 1450 1400 1700 1700 1700 1800 1800 3500 3400 3300
32 x 36 34 x 36 35 x 38 36 x 38 36 x 41 41 x 46 46 x 50 50 x 55 50 x 60 55 x 60 60 x 65 65 x 70 70 x 80 75 x 80
Set of double open end wrenches – DIN 3110 – 12pcs • 6-32 mm
article no
0010000S
size mm
6 x 7 – 8 x 9 – 10 x 11 12 x 13 – 14 x 15 – 16 x 17 18 x 19 – 20 x 22 – 21 x 23 24 x 27 – 25 x 28 – 30 x 32
weight g
4120
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Double open end wrench Inch – DIN 3110 –
article no
size Inch/”
0017140S 0017101S 0017102S 0017103S 0017104S 0017113S 0017105S 0017114S 0017106S 0017115S 0017107S 0017116S 0017108S 0017109S 0017117S 0017118S 0017110S 0017119S 0017120S 0017141S 0017121S 0017122S 0017123S 0017124S 0017125S 0017126S 0017127S 0017111S 0017128S 0017129S 0017130S 0017112S 0017131S 0017142S 0017132S 0017133S 0017134S 0017135S 0017136S 0017137S 0017138S 0017139S 0017143S 0017144S 0017145S 0017146S
7/ 1/ 5/ 3/ 7/ 1/ 1/ 1/ 9/ 9/
32 4 16 8 16 2 2 2 16
16 19/ 32 19/ 32 5/ 8 5/ 8 11/ 16 11/ 16 3/ 4 3/ 4 3/ 4 3/ 4 25/ 32 25/ 32 13/ 16 7/ 8 7/ 8 7/ 8 7/ 8 15/ 16 15/ 16
1 1 1. 1/16 1. 1/8 1. 1/16 1. 1/8 1. 1/4 1. 1/4 1. 5/16 1. 1/4 1. 3/8 1. 7/16 1. 1/2 1. 5/8 1. 5/8 1. 11/16 1. 11/16
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
1/ 5/ 3/ 7/ 1/ 5/ 9/
4 16 8 16 2 8
16 11/ 16 5/ 8 3/ 4 11/ 16 25/ 32 11/ 16 3/ 4 25/ 32 7/ 8 7/ 8 25/ 32 13/ 16 7/ 8 13/ 16 7/ 8 7/ 8 15/ 16 31/ 32
1 1. 1/16 1 1. 1/16 1. 1/8 1. 5/16 1. 1/4 1. 5/16 1. 7/16 1. 1/2 1. 3/8 1. 7/16 1. 1/2 1. 5/8 1. 1/2 1. 5/8 1. 11/16 1. 13/16 1. 3/4 1. 7/8 2
length mm
weight g
article no
size Inch/”
125 125 125 140 140 160 160 200 200 200 200 200 200 225 225 225 225 225 225 225 225 225 225 225 240 240 270 270 270 270 300 300 300 320 320 320 320 370 370 370 370 370 370 370 370 390
65 65 60 90 85 170 170 220 220 220 220 220 200 310 300 300 300 300 310 310 300 300 300 300 400 400 720 720 720 700 750 750 750 1220 1150 1150 1150 1480 1400 1400 1400 1400 1400 1350 1350 1700
0017147S 0017148S 0017149S 0017150S 0017151S 0017152S
1. 13/16 1. 3/4 2 2 2. 3/16 2. 1/4
x x x x x x
length mm
weight g
390 390 440 440 470 470
1700 1700 1700 1700 1800 1800
2 2. 1/16 2. 3/16 2. 5/16 2. 3/8 2. 3/8
Set of double open end wrenches Inch – DIN 3110 – 8pcs • 1/4-1"
article no
size Inch/”
0010001S
1/
x 16 x 9/ 16 x 3/ 4 x 7/
4
5/
weight g 16 –
3/
x x 2 – 2 5/ – 5/ x 8 8 7/ – 15/ 8 16 x 1/
1/
8
7/ 9/
16
1850
16
11/
16
1
11
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Double open end wrench small
Flat double open end wrench – DIN 658 –
article no
size mm
0017204S 0017201S 0017205S 0017202S 0017206S 0017207S 0017208S 0017209S 0017210S 0017211S 0017212S 0017213S 0017214S
4 4,5 5 5,5 6 7 8 9 10 11 12 13 14
length mm
weight g
article no
7 7 7 10 10 10 15 15 20 20 35 35 35
0017153S 0017154S 0017155S 0017156S 0017157S 0017158S
70 70 78 78 78 91 96 103 105 116 116 131 131
size mm
3 x 3,5 4 x 4,5 5 x 5,5 6 x 7 8 x 9 10 x 11
length mm
weight g
50 60 70 80 90 100
4,5 5 6 7,5 10 12
Flat double open end wrench Inch – DIN 658 –
Set of double open end wrenches small • 10pcs • 5-13 mm article no
article no
0017200S
12
size mm
5 – 5,5 – 6 – 7 – 8 9 – 10 – 11 – 12 – 13
weight g
180
0017159S 0017160S 0017161S 0017162S 0017163S 0017164S 0017165S 0017166S
size Inch/” 5/
x x 1/ 4 x 1/ 4 x 5/ 16 x 5/ 16 x 5/ 16 x 3/ 8 x 3/
32 16
3/ 7/ 9/ 5/
16 32 32
16 11/ 32 3/ 8 13/ 32 7/ 16
length mm
weight g
60 70 80 80 90 90 100 100
5 6 7,5 7,5 10 10 12 12
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Single open end wrench – DIN 894 –
article no
size mm
0020006S 0020007S 0020008S 0020009S 0020010S 0020011S 0020012S 0020013S 0020014S 0020015S 0020016S 0020017S 0020018S 0020019S 0020020S 0020021S 0020022S 0020023S 0020024S 0020025S 0020026S 0020027S 0020028S 0020029S 0020030S 0020032S 0020033S 0020034S 0020035S 0020036S 0020037S 0020038S 0020041S 0020042S 0020046S 0020047S 0020050S 0020052S 0020054S 0020055S 0020056S 0020058S 0020060S 0020063S 0020065S 0020067S
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50 52 54 55 56 58 60 63 65 67
length mm
weight g
article no
size mm
90 90 90 90 100 100 140 140 165 145 165 165 165 190 190 205 205 220 220 220 220 220 250 250 250 285 285 285 285 285 285 330 330 330 360 360 440 440 440 440 440 480 480 520 520 520
14 13 12 11 25 22 45 40 80 75 70 70 70 100 95 140 130 170 170 160 160 150 270 260 250 340 340 320 320 300 300 540 520 500 650 630 1100 1100 1050 1050 1000 1475 1475 1700 1700 1700
0020070S 0020071S 0020075S 0020077S 0020080S 0020082S 0020085S 0020088S 0020090S 0020094S 0020095S 0020100S 0020105S 0020110S 0020115S 0020120S 0020125S 0020130S 0020135S
70 71 75 77 80 82 85 88 90 94 95 100 105 110 115 120 125 130 135
length mm
weight g
540 540 540 540 630 630 680 680 680 830 830 800 850 900 950 990 1000 1000 1000
1900 1900 1800 1800 2900 2800 3400 3300 3200 5000 4800 5900 8900 9000 9300 9600 8300 8300 8300
13
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Single open end wrench Inch – DIN 894 –
article no
size Inch/”
0021001S 0021002S 0021003S 0021004S 0021005S 0021006S 0021007S 0021008S 0021009S 0021010S 0021011S 0021012S 0021013S 0021014S 0021015S 0021016S 0021017S 0021018S 0021019S 0021020S 0021021S 0021022S 0021023S 0021024S 0021025S 0021026S 0021027S 0021028S 0021029S 0021030S 0021031S 0021032S 0021033S 0021034S 0021035S 0021036S 0021037S 0021038S 0021039S 0021040S 0021041S 0021042S 0021043S 0021044S 0021045S 0021046S
1/
14
5/
4 16
11/
32
3/
8
7/
16
13/ 1/ 9/
32
2
16 19/ 32 5/ 8 11/ 16 3/ 4 25/ 32 13/ 16 7/ 8 15/ 16 31/ 32
1 1. 1/16 1. 1/8 1. 3/16 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2 2. 1/16 2. 1/8 2. 3/16 2. 1/4 2. 5/16 2. 3/8 2. 7/16 2. 1/2 2. 9/16 2. 5/8 2. 3/4 2. 13/16 2. 15/16
length mm
weight g
article no
90 90 90 90 100 100 140 165 165 165 165 190 190 205 205 220 220 220 220 250 250 285 285 285 285 330 330 330 330 360 360 360 440 440 440 440 480 480 480 520 520 520 520 540 540 540
14 12 11 11 25 22 40 80 75 70 70 100 95 140 130 170 170 160 150 270 250 340 340 320 300 540 520 520 500 650 650 630 1100 1100 1050 1050 1000 1475 1475 1700 1700 1700 1700 1900 1900 1900
0021047S 0021048S 0021049S 0021050S 0021051S 0021052S 0021053S 0021054S
size Inch/”
3 3. 1/8 3. 1/4 3. 3/8 3. 1/2 3. 5/8 3. 3/4 3. 7/8
length mm
weight g
540 630 630 680 680 680 830 830
1800 2900 2800 3400 3300 3200 5000 4800
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Combination wrench
Set of combination wrenches
– DIN 3113 –
– DIN 3113 –
article no
size mm
0130006S 0130007S 0130008S 0130009S 0130010S 0130011S 0130012S 0130013S 0130014S 0130015S 0130016S 0130017S 0130018S 0130019S 0130020S 0130021S 0130022S 0130023S 0130024S 0130025S 0130026S 0130027S 0130028S 0130029S 0130030S 0130032S 0130034S 0130036S 0130038S 0130041S 0130046S 0130050S 0130055S 0130060S 0130065S 0130070S 0130075S 0130080S
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 36 38 41 46 50 55 60 65 70 75 80
length mm
weight g
130 130 135 150 150 150 190 190 190 210 210 210 230 230 230 250 250 250 270 270 270 280 280 280 300 300 320 330 400 410 410 540 520 515 500 510 680 680
50 55 55 95 85 90 170 165 160 230 230 220 330 330 325 360 355 350 500 475 470 665 680 630 730 650 950 930 2150 2000 1900 3400 3500 3300 3200 3800 3900 4000
description
article no
size mm
weight g
8pcs
8-19 mm
0130002S
8 – 9 – 10 – 11 13 – 14 – 17 – 19
1200
11pcs
8-22 mm
0130003S
8 – 10 – 11 – 12 13 – 14 – 16 – 17 18 – 19 – 22
2200
12pcs
10-32 mm
0130001S
10 – 11 – 12 – 13 14 – 17 – 19 – 22 24 – 27 – 30 – 32
4100
26pcs
6-32 mm
0130000S
6– 7– 8– 9 10 – 11 – 12 – 13 14 – 15 – 16 – 17 18 – 19 – 20 – 21 22 – 23 – 24 – 25 26 – 27 – 28 – 29 30 – 32
8450
15
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Combination wrench Inch
Set of combination wrenches Inch
– DIN 3113 –
– DIN 3113 – 12pcs • 1/4 - 1. 1/4"
article no
size Inch/”
0137101S 0137102S 0137118S 0137103S 0137104S 0137105S 0137106S 0137107S 0137108S 0137109S 0137110S 0137119S 0137111S 0137112S 0137113S 0137120S 0137114S 0137115S 0137116S 0137121S 0137117S 0137122S 0137123S 0137124S 0137125S 0137126S 0137127S 0137128S 0137129S 0137130S 0137131S 0137132S 0137133S 0137134S 0137135S 0137136S
1/ 5/
4 16
11/ 3/ 7/ 1/ 9/
32
8 16 2
16 19/ 32 5/ 8 11/ 16 3/ 4 25/ 32 13/ 16 7/ 8 15/ 16 31/ 32
1 1. 1/16 1. 1/8 1. 3/16 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2 2. 1/16 2. 1/8 2. 3/16 2. 1/4
length mm
weight g
135 135 150 150 150 190 190 210 210 230 230 230 250 250 270 270 270 280 280 300 300 300 330 330 330 410 410 410 410 410 435 435 435 455 455 475
45 45 60 60 60 110 110 200 200 230 230 230 300 300 410 410 410 510 510 570 570 570 840 840 840 2000 2000 2000 1900 1900 1600 1600 1600 2000 2000 2500
article no
size Inch/”
0137100S
1/ 1/ 7/
4 – 2 –
5/ 9/
8 – 1
weight g
16 – 16 –
3/ 5/
8
8 – 1.1/
– 7/16 – 3/4 1 16 – 1. /4
3300
Further dimensions on request! 16
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Combination Wrench extra long
article no
size mm
0137140S 0137142S 0137143S 0137147S 0137149S 0137151S 0137153S 0137154S 0137155S 0137156S 0137159S 0137160S 0137161S
10 12 13 17 19 22 24 27 30 32 36 41 46
Combination wrench offset
length mm
weight g
article no
190 210 225 280 310 350 400 450 480 500 550 600 640
70 70 90 135 200 260 370 500 900 730 1200 2000 2800
0137170S 0137172S 0137173S 0137177S 0137179S 0137182S 0137184S 0137187S 0137190S 0137191S
Sets of combination wrenches extra long
description
6pcs
10pcs
10-22 mm
10-32 mm
article no
0137162S
0137164S
size mm
size mm
10 12 13 17 19 22 24 27 30 32
length mm
weight g
148 168 185 232 258 292 318 352 390 412
70 65 80 140 190 300 370 500 645 780
Sets of combination wrenches offset
description
article no
size mm
weight g
6pcs
10-22 mm
0137206S
10 – 12 – 13 – 17 19 – 22
845
10pcs
10-32 mm
0137208S
10 – 12 – 13 – 17 19 – 22 – 24 – 27 30 – 32
3140
weight g
10 – 12 – 13 – 17 19 – 22
825
10 – 12 – 13 – 17 19 – 22 – 24 – 27 30 – 32
3325
Further dimensions and combinations on request! 17
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Double end box wrench offset – DIN 838 –
article no
0110607S 0110608S 0110708S 0110709S 0110809S 0110810S 0110910S 0110911S 0111011S 0111012S 0111013S 0111014S 0111113S 0111114S 0111213S 0111214S 0111314S 0111315S 0111316S 0111317S 0111415S 0111416S 0111417S 0111617S 0111618S 0111719S 0111722S 0111819S 0111820S 0111821S 0111922S 0111924S 0112022S 0112123S 0112124S 0112224S 0112227S 0112326S 0112426S 0112427S 0112430S 0112528S 0112629S 0112729S 0112730S 0112732S
18
size mm
6 x 7 6 x 8 7 x 8 7 x 9 8 x 9 8 x 10 9 x 10 9 x 11 10 x 11 10 x 12 10 x 13 10 x 14 11 x 13 11 x 14 12 x 13 12 x 14 13 x 14 13 x 15 13 x 16 13 x 17 14 x 15 14 x 16 14 x 17 16 x 17 16 x 18 17 x 19 17 x 22 18 x 19 18 x 20 18 x 21 19 x 22 19 x 24 20 x 22 21 x 23 21 x 24 22 x 24 22 x 27 23 x 26 24 x 26 24 x 27 24 x 30 25 x 28 26 x 29 27 x 29 27 x 30 27 x 32
length mm
weight g
article no
170 170 170 170 170 180 180 180 180 180 195 195 195 195 195 195 195 230 230 230 230 230 230 230 280 280 280 280 280 280 280 290 280 290 300 300 330 330 330 330 370 330 370 370 370 370
105 110 100 100 100 140 125 135 145 140 175 170 190 180 180 180 175 240 240 250 250 240 230 240 420 400 380 400 390 390 370 530 380 510 510 510 650 670 680 670 930 660 1000 1000 900 900
0113032S 0113034S 0113036S 0113234S 0113236S 0113436S 0113538S 0113638S 0113641S 0113842S 0114146S 0114650S 0115055S 0115060S 0115560S 0116065S 0116570S 0117080S 0117580S 0118590S
size mm
30 x 32 30 x 34 30 x 36 32 x 34 32 x 36 34 x 36 35 x 38 36 x 38 36 x 41 38 x 42 41 x 46 46 x 50 50 x 55 50 x 60 55 x 60 60 x 65 65 x 70 70 x 80 75 x 80 85 x 90
length mm
weight g
370 430 430 430 430 430 450 450 450 450 460 480 540 540 540 690 690 770 790 800
860 850 1300 1300 1300 1250 1400 1450 1450 1450 1800 2100 3000 2800 2800 4200 4200 6000 6600 7000
Set of double end box wrench offset – DIN 838 – 12pcs • 6-32 mm
article no
size mm
0110000S
6 x 7 – 8 x 9 – 10 x 11 12 x 13 – 14 x 15 – 16 x 17 18 x 19 – 20 x 22 – 21 x 23 24 x 27 – 25 x 28 – 30 x 32
weight g
4500
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Double end box wrench Inch offset – DIN 838 –
Set of double end box wrench Inch offset – DIN 838 – 8pcs • 1/4 -1"
article no
size Inch/”
0117101S 0117102S 0117103S 0117104S 0117105S 0117113S 0117106S 0117107S 0117108S 0117109S 0117114S 0117115S 0117116S 0117110S 0117117S 0117118S 0117119S 0117120S 0117121S 0117111S 0117122S 0117123S 0117112S 0117124S 0117125S 0117126S 0117127S 0117128S 0117129S 0117130S 0117131S 0117132S 0117133S 0117134S 0117135S 0117136S 0117137S 0117138S 0117139S
1/ 5/ 3/ 7/ 1/ 1/ 9/
4 16 8 16 2 2 16
19/ 5/ 5/
32
8
8 11/ 16 11/ 16 3/ 4 3/ 4 13/ 16 25/ 32 7/ 8 7/ 8 7/ 8 15/ 16
1 1. 1/16 1. 1/16 1. 1/8 1. 3/16 1. 1/4 1. 1/4 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 5/8 1. 11/16 1. 13/16 1. 3/4 2 2 2. 3/16 2. 1/4
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
5/ 3/ 7/ 1/ 9/
16 8 16 2
16 19/ 32 5/ 8 11/ 16 11/ 16 3/ 4 3/ 4 25/ 32 25/ 32 7/ 8 7/ 8 13/ 16 15/ 16
1 1. 1/16 1 1. 1/8 1. 1/8 1. 1/4 1. 5/16 1. 5/16 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 1/2 1. 5/8 1. 13/16 1. 7/8 2 2. 1/16 2. 3/16 2. 3/8 2. 3/8 2. 7/16
length mm
weight g
170 170 180 195 195 230 230 230 230 280 280 280 280 280 280 280 300 300 330 330 330 370 370 370 430 430 430 430 430 450 450 460 460 480 480 540 540 540 540
110 100 135 190 175 240 250 230 240 400 400 380 360 370 380 350 510 500 650 670 660 1000 900 880 850 1200 1300 1300 1200 1400 1450 1800 1800 2100 2000 3000 2800 2800 2700
article no
size Inch/”
0117100S
1/
x 16 x 9/ 16 x 3/ 4 x 7/
4
5/
weight g 16 –
3/
x x 2 – 2 5/ – 5/ x 8 8 7/ – 15/ 8 16 x 1/
1/
8
7/ 9/
16
2100
16
11/
16
1
Further dimensions on request! 19
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Double end box wrench Inch straight – DIN 837 –
Double end box wrench straight – DIN 837 –
article no
0120607S 0120809S 0120810S 0120911S 0121011S 0121013S 0121213S 0121214S 0121314S 0121315S 0121415S 0121317S 0121417S 0121617S 0121618S 0121719S 0121819S 0121922S 0121924S 0122022S 0122123S 0122224S 0122426S 0122427S 0122430S 0122528S 0122628S 0122729S 0122732S 0123032S 0123036S 0123236S 0123641S 0124146S 0124650S
20
size mm
6 x 7 8 x 9 8 x 10 9 x 11 10 x 11 10 x 13 12 x 13 12 x 14 13 x 14 13 x 15 14 x 15 13 x 17 14 x 17 16 x 17 16 x 18 17 x 19 18 x 19 19 x 22 19 x 24 20 x 22 21 x 23 22 x 24 24 x 26 24 x 27 24 x 30 25 x 28 26 x 28 27 x 29 27 x 32 30 x 32 30 x 36 32 x 36 36 x 41 41 x 46 46 x 50
length mm
weight g
Artikel-Nr
100 115 120 125 130 130 140 140 140 140 155 155 155 170 170 190 190 200 200 200 200 200 210 210 255 255 255 255 265 265 285 285 460 432 477
12 16 20 22 24 24 40 45 45 45 48 50 50 70 65 80 80 120 120 120 120 120 135 130 185 200 190 185 228 228 284 284 330 810 1040
0120001S 0120002S 0120003S 0120004S 0120005S 0120006S 0120007S 0120008S 0120009S 0120010S 0120011S 0120012S 0120013S 0120014S
size Inch/” 1/
x x 16 3/ x 8 7/ x 16 1/ x 2 1/ x 2 9/ x 16 5/ x 8 11/ x 16 3/ x 4 13/ x 16 15/ x 16 1 x 1. 3/16 x 5/
4
5/ 3/ 7/ 9/ 5/
16 8 16 16
8 19/ 32 11/ 16 25/ 32 3/ 4 7/ 8 15/ 16 1. 1/16 1. 1/8 1. 1/4
length mm
weight g
100 115 125 140 155 140 155 190 190 200 200 210 255 265
12 16 22 45 50 45 50 80 80 120 120 130 200 228
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Single box wrench Inch 12-point – DIN 3111 –
Single box wrench 12-point – DIN 3111 –
Artikel-Nr
size mm
0090014S 0090015S 0090016S 0090017S 0090018S 0090019S 0090020S 0090021S 0090022S 0090023S 0090024S 0090025S 0090026S 0090027S 0090028S 0090029S 0090030S 0090032S 0090033S 0090034S 0090035S 0090036S 0090037S 0090038S 0090041S 0090042S 0090046S 0090047S 0090050S 0090052S 0090054S 0090055S 0090056S 0090058S 0090060S 0090063S 0090065S 0090067S 0090070S 0090071S 0090075S 0090077S 0090080S 0090082S 0090085S 0090088S 0090090S 0090094S 0090095S
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50 52 54 55 56 58 60 63 65 67 70 71 75 77 80 82 85 88 90 94 95
length mm
weight g
article no
size Inch/”
140 140 155 155 170 170 190 190 190 215 215 230 230 230 265 265 265 265 265 290 290 290 325 325 325 325 365 365 400 430 430 445 465 465 465 500 500 500 550 550 620 620 620 620 650 650 650 700 700
130 130 150 150 250 280 280 300 300 300 400 430 450 500 520 510 500 450 430 670 660 650 900 900 900 900 1100 1100 1400 1800 1700 1650 1800 1800 2000 2300 2100 2000 3000 2800 5000 5000 4500 4300 5000 4800 4200 5200 5200
0090001S 0090002S 0090003S 0090004S 0090005S 0090006S 0090007S 0090008S 0090009S 0090010S 0090011S 0090012S 0090013S 0090096S 0090097S 0090098S 0090099S 0090100S 0090101S 0090102S 0090103S 0090104S 0090105S 0090106S 0090107S 0090108S 0090109S 0090110S 0090111S 0090112S 0090113S 0090114S 0090115S 0090116S 0090117S 0090118S 0090119S 0090120S 0090121S 0090122S 0090123S 0090124S 0090125S
1/ 9/
2 16
19/
32
5/
8
3/
4
11/ 25/ 13/ 7/
16 32 16
8
15/ 31/
16 32
1 1. 1/16 1. 1/8 1. 3/16 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2 2. 1/16 2. 1/8 2. 3/16 2. 1/4 2. 5/16 2. 3/8 2. 7/16 2. 1/2 2. 9/16 2. 3/4 2. 15/16 3 3. 1/8 3. 3/8 3. 1/2 3. 3/4
length mm
weight g
140 140 140 155 155 170 190 190 190 215 215 230 230 265 265 265 265 290 325 325 325 325 325 365 365 365 400 430 430 445 465 465 465 500 500 500 550 620 620 620 650 650 700
130 130 130 150 150 280 280 300 300 400 430 430 500 520 500 450 430 660 900 900 850 900 850 1200 1100 1100 1400 1800 1700 1650 1800 1800 2000 2100 2000 2100 3000 5000 5000 4500 5000 4800 5200
21
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Striking open end wrench – DIN 133 –
article no
size mm
0030014S 0030017S 0030019S 0030022S 0030024S 0030027S 0030028S 0030029S 0030030S 0030032S 0030033S 0030034S 0030035S 0030036S 0030038S 0030041S 0030042S 0030046S 0030047S 0030050S 0030052S 0030054S 0030055S 0030056S 0030058S 0030060S 0030063S 0030065S 0030067S 0030070S 0030071S 0030075S 0030077S 0030080S 0030082S 0030085S 0030088S 0030090S 0030094S 0030095S 0030100S 0030105S 0030110S 0030115S 0030120S 0030125S
14 17 19 22 24 27 28 29 30 32 33 34 35 36 38 41 42 46 47 50 52 54 55 56 58 60 63 65 67 70 71 75 77 80 82 85 88 90 94 95 100 105 110 115 120 125
22
length mm
weight g
article no
180 125 120 135 150 180 180 190 190 210 210 210 210 210 210 220 220 250 255 275 275 300 290 290 290 320 330 330 380 380 380 380 380 370 370 370 430 430 430 430 470 470 510 510 545 545
350 120 125 150 200 380 370 360 350 680 670 660 650 640 630 790 750 1150 1200 1350 1500 1900 1600 1550 1500 2600 3000 3000 4200 3800 3700 3600 5000 4800 4700 4500 7200 7000 6900 6800 9500 9300 14100 13300 16400 15500
0030130S 0030135S 0030140S 0030145S 0030150S 0030155S 0030160S 0030165S 0030170S 0030175S 0030180S 0030185S 0030190S 0030195S 0030200S 0030205S 0030210S 0030220S 0030230S
size mm
130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 220 230
length mm
weight g
575 575 575 640 640 640 640 715 715 715 715 715 715 715 715 715 715 715 715
19800 19200 19000 27000 26800 26500 26300 39500 38500 37000 36000 35800 38500 38500 38000 37500 37000 36500 36500
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Striking open end wrench Inch – DIN 133 –
article no
0030001S 0030002S 0030003S 0030004S 0030005S 0030006S 0030007S 0030008S 0030009S 0030252S 0030010S 0030011S 0030012S 0030013S 0030231S 0030232S 0030233S 0030234S 0030235S 0030236S 0030237S 0030253S 0030238S 0030254S 0030239S 0030240S 0030241S 0030255S 0030256S 0030242S 0030243S 0030244S 0030245S 0030246S 0030247S 0030248S 0030257S 0030249S 0030250S 0030251S
size Inch/”
1 1. 1/16 1. 1/8 1. 3/16 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2 2. 1/16 2. 1/8 2. 3/16 2. 1/4 2. 5/16 2. 3/8 2. 7/16 2. 1/2 2. 9/16 2. 5/8 2. 3/4 2. 13/16 2. 15/16 3 3. 1/8 3. 1/4 3. 3/8 3. 1/2 3. 5/8 3. 3/4 3. 7/8 4 4. 1/8 4. 1/2
length mm
weight g
150 180 180 190 210 210 210 210 210 220 220 220 250 250 255 275 275 300 290 290 290 320 330 330 330 380 380 380 380 380 370 370 370 430 430 430 430 470 470 510
200 380 370 350 680 670 650 640 630 750 790 750 1100 1150 1200 1350 1500 1900 1600 1500 1500 2600 3000 3000 3000 4200 3800 3700 3500 4000 4800 4700 4500 7200 7000 6800 6600 9500 9500 13300
23
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Striking box wrench 12-point – DIN 7444 –
article no
0100017S 0100019S 0100022S 0100024S 0100027S 0100028S 0100029S 0100030S 0100032S 0100033S 0100034S 0100035S 0100036S 0100037S 0100038S 0100041S 0100042S 0100046S 0100047S 0100050S 0100052S 0100054S 0100055S 0100056S 0100057S 0100058S 0100060S 0100063S 0100065S 0100067S 0100070S 0100071S 0100075S 0100076S 0100077S 0100080S 0100082S 0100085S 0100088S 0100090S 0100094S 0100095S 0100100S 0100105S 0100110S 0100115S
24
size mm
17 19 22 24 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50 52 54 55 56 57 58 60 63 65 67 70 71 75 76 77 80 82 85 88 90 94 95 100 105 110 115
length mm
weight g
article no
150 150 150 150 190 190 190 190 190 190 210 210 210 210 230 230 230 240 240 255 255 255 255 255 255 280 280 295 295 295 320 320 320 320 320 355 355 365 360 360 360 360 360 360 450 450
400 400 350 350 600 580 560 550 580 570 680 700 690 680 1100 1000 1000 1250 1270 1400 1400 1350 1340 1330 1300 2500 2400 2900 2800 2700 3400 3300 3200 3100 3000 3600 3500 5000 4800 4600 4500 4400 4200 3900 8600 8100
0100120S 0100125S 0100128S 0100130S 0100135S 0100140S 0100145S 0100150S 0100155S 0100160S 0100165S 0100170S 0100175S 0100180S 0100185S 0100190S 0100195S 0100200S
size mm
120 125 128 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200
length mm
weight g
480 480 520 520 520 520 580 580 580 580 650 650 650 650 700 700 700 700
9700 9500 13200 13200 12900 12900 19000 18000 17200 19000 28000 27700 27000 26000 32700 32200 31800 31000
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Striking box wrench Inch 12-point – DIN 7444 –
article no
size Inch/”
0100201S 0100202S 0100203S 0100204S 0100205S 0100206S 0100207S 0100208S 0100209S 0100210S 0100211S 0100006S 0100212S 0100008S 0100009S 0100010S 0100213S 0100214S 0100013S 0100215S 0100216S 0100217S 0100233S 0100218S 0100219S 0100220S 0100234S 0100221S 0100235S 0100236S 0100222S 0100223S 0100224S 0100237S 0100225S 0100226S 0100227S 0100230S 0100238S 0100239S 0100240S 0100241S 0100231S 0100232S 0100242S 0100243S 0100244S
11/ 3/
25/ 13/ 7/
16
4 32 16
8
15/ 16 1 1. 1/16 1. 1/8 1. 1/4 1. 3/16 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2 2. 1/16 2. 1/8 2. 3/16 2. 1/4 2. 5/16 2. 3/8 2. 7/16 2. 1/2 2. 9/16 2. 5/8 2. 3/4 2. 13/16 2. 7/8 2. 15/16 3 3. 1/8 3. 1/4 3. 3/8 3. 1/2 3. 5/8 3. 3/4 3. 7/8 4 4. 1/8 4. 1/2
Striking box wrench offset • 12-point
length mm
weight g
article no
size mm
150 150 150 150 150 150 150 190 190 190 190 190 210 210 230 230 230 230 240 240 240 255 255 255 255 255 280 280 295 295 295 295 320 320 320 320 320 355 355 365 360 360 360 360 360 360 450
400 400 390 380 350 350 340 700 580 580 550 570 700 690 1100 1000 1000 1000 1200 1250 1270 1400 1400 1350 1340 1300 2500 2400 2700 2900 2800 2700 3200 3300 3300 3200 3100 3600 3500 5000 4800 4500 4500 4300 4200 3900 8100
0100250S 0100251S 0100252S 0100253S 0100254S 0100255S 0100256S 0100257S 0100258S 0100259S 0100260S 0100261S 0100262S 0100263S 0100264S 0100265S 0100266S 0100267S 0100268S
27 30 32 36 41 46 50 55 60 65 70 75 80 85 90 95 100 110 115
length mm
weight g
245 270 270 280 310 320 320 320 355 380 400 420 440 440 440 440 440 440 440
1100 1500 1500 1600 2100 2500 2500 2600 3200 3800 4600 5700 6600 7000 9300 10000 11700 13400 14500
Further dimensions on request! 25
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Long handle open end wrench 90° 45° 15°
Long handle open end wrench Inch 90° 45° 15°
*please add your desired position of the jaw (e.g. 0310022S-45 for 22 mm and 45°)
*please add your desired position of the jaw (e.g. 0310005S-45 for 1" and 45°)
article no + degrees size mm
0310022S-* 0310023S-* 0310024S-* 0310025S-* 0310026S-* 0310027S-* 0310028S-* 0310029S-* 0310030S-* 0310032S-* 0310033S-* 0310034S-* 0310035S-* 0310036S-* 0310037S-* 0310038S-* 0310041S-* 0310042S-* 0310046S-* 0310047S-* 0310050S-* 0310052S-* 0310054S-* 0310055S-* 0310056S-* 0310058S-* 0310060S-*
26
22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50 52 54 55 56 58 60
length mm
weight g
320 320 350 350 380 380 420 420 450 450 450 450 500 500 500 500 550 550 600 600 660 660 660 730 730 800 800
450 450 600 600 850 850 1000 1000 1000 1000 1000 1000 1400 1400 1400 1400 1800 1800 2500 2500 3200 3200 4400 4400 4400 5600 5600
article no + degrees size Inch/”
0310001S-* 0310002S-* 0310003S-* 0310004S-* 0310005S-* 0310006S-* 0310007S-* 0310008S-* 0310009S-* 0310010S-* 0310011S-* 0310012S-* 0310013S-* 0310014S-* 0310015S-* 0310016S-* 0310017S-* 0310018S-* 0310019S-* 0310020S-* 0310021S-* 0310061S-* 0310062S-* 0310063S-* 0310064S-* 0310065S-*
13/ 7/
16
8
15/ 31/
16 32
1 1. 1/16 1. 1/8 1. 3/16 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2 2. 1/16 2. 1/8 2. 3/16 2. 1/4 2. 5/16 2. 3/8
length mm weight g
320 320 350 350 350 380 420 450 450 450 500 500 500 550 550 550 600 600 600 660 660 660 730 800 800 800
450 450 600 600 600 850 1000 1000 1000 1000 1400 1400 1400 1800 1800 1800 2500 2500 2500 3200 3200 4400 4400 4400 5600 5600
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Box wrench for extension
article no
0270025S 0270024S 0270027S 0270030S 0270032S 0270033S 0270034S 0270035S 0270036S 0270037S 0270038S 0270041S 0270042S 0270046S 0270047S 0270050S 0270052S 0270054S 0270055S 0270056S 0270058S 0270060S 0270063S 0270065S 0270067S 0270070S 0270071S 0270075S 0270077S 0270080S 0270082S 0270085S 0270090S 0270095S 0270100S
size mm
22 24 27 30 32 33 34 35 36 37 38 41 42 46 47 50 52 54 55 56 58 60 63 65 67 70 71 75 77 80 82 85 90 95 100
Box wrench for extension Inch
length mm
weight g
article no
260 260 260 260 260 260 260 260 260 270 270 270 270 300 300 300 350 350 300 350 350 370 370 400 400 400 400 400 400 410 410 410 410 410 412
960 1000 960 950 940 920 910 910 910 1200 1900 1100 1100 1500 1500 1700 2600 2500 1900 2600 2500 2500 2500 3200 3100 3000 2800 2700 2600 5000 5000 5100 5010 4790 4545
0270001S 0270002S 0270003S 0270004S 0270005S 0270006S 0270007S 0270008S 0270009S 0270010S 0270011S 0270012S 0270013S 0270014S 0270015S 0270016S 0270017S 0270018S 0270019S 0270020S 0270021S 0270022S 0270023S 0270104S 0270105S 0270106S 0270107S 0270108S 0270109S 0270110S
size Inch/”
1. 3/16 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2 2. 1/16 2. 1/8 2. 3/16 2. 1/4 2. 5/16 2. 3/8 2. 7/16 2. 1/2 2. 9/16 2. 5/8 2. 3/4 2. 13/16 2. 15/16 3 3. 1/8 3. 1/4 3. 3/8
length mm
weight g
260 260 260 260 260 270 270 270 270 270 300 300 300 350 350 300 350 350 370 370 370 400 400 400 400 400 400 410 410 410
950 940 920 910 910 1900 1200 1100 1100 1000 1500 1500 1700 2600 2400 1900 2500 2500 2500 2500 2500 3200 3100 3000 2800 2700 2500 4900 5000 5100
27
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Set of box wrenches for extension 3 extensions, 15 wrenches
Extension for box wrenches
article no
size mm
weight g
0270111S
24 – 27 – 30 – 32 – 36 41 – 46 – 50 – 55 – 60 65 – 70 – 75 – 80 – 85 Extensions 22-42 / 46-58 / 60-100
40200
28
article no
size mm/Inch/”
Ø x length mm weight g
0271001S
22-42 1.3/16
22 x 600 - 1. 5/8
1100
0271002S
46-58 1.11/16
25 x 750 - 2. 1/4
2800
0271003S
60-100 2.5/16
30 x 850 - 3. 3/8
3800
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Construction wrench Inch with pin
Construction wrench with pin
article no
0137300S 0137301S 0137302S 0137303S 0137304S 0137305S 0137306S 0137307S 0137308S 0137309S 0137310S 0137311S 0137312S 0137313S 0137314S 0137315S 0137316S 0137317S 0137318S 0137319S 0137320S 0137321S 0137322S 0137323S 0137324S 0137325S
size mm
17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50
length mm
weight g
article no
size Inch/”
320 320 350 350 350 350 370 370 370 370 370 400 400 400 400 400 400 430 430 430 430 470 470 500 500 530
270 270 465 465 465 465 650 650 650 650 650 950 950 950 950 950 950 1400 1400 1400 1400 1900 1900 2700 2700 3550
0137326S 0137327S 0137328S 0137329S 0137330S 0137331S 0137332S 0137333S 0137334S 0137335S 0137336S 0137337S 0137338S 0137339S 0137340S 0137341S 0137342S 0137343S 0137344S 0137345S 0137346S 0137347S 0137348S
11/ 3/
25/ 13/ 7/
16
4 32 16
8
15/ 31/
16 32
1 1. 1/16 1. 1/8 1. 3/16 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2
length mm
weight g
320 350 350 350 350 370 370 370 370 400 400 400 400 430 430 430 470 470 470 500 500 500 530
270 270 465 465 465 465 650 650 650 650 650 950 950 950 1400 1400 1400 1900 1900 1900 2700 2700 3550
29
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Construction wrench Inch with pin offset
Construction wrench with pin offset
article no
size mm
0137349S 0137350S 0137351S 0137352S 0137353S 0137354S 0137355S 0137356S 0137357S 0137358S 0137359S 0137360S 0137361S 0137362S 0137363S 0137364S 0137365S 0137366S 0137367S 0137368S 0137369S 0137370S 0137371S 0137372S 0137373S 0137374S
17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50
30
length mm
weight g
article no
size Inch/”
320 320 350 350 350 350 370 370 370 370 370 400 400 400 400 400 400 430 430 430 430 470 470 500 500 530
295 295 510 510 510 510 715 715 715 715 715 1145 1145 1145 1145 1145 1145 1540 1540 1540 1540 2090 2090 2970 2970 3900
0137375S 0137376S 0137377S 0137378S 0137379S 0137380S 0137381S 0137382S 0137383S 0137384S 0137385S
11/ 7/
16
8
15/
16
1. 1/16 1. 3/16 1. 1/4 1. 7/16 1. 1/2 1. 5/8 1. 13/16 2
length mm
weight g
290 355 355 380 410 380 460 460 510 550 550
295 510 510 715 715 1145 1540 1145 2090 2970 3900
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Construction box wrench Inch with pin offset
Construction box wrench with pin offset
article no
size mm
0137500S 0137501S 0137502S 0137503S 0137504S 0137505S 0137506S 0137507S 0137508S 0137509S 0137510S 0137511S 0137512S 0137513S 0137514S 0137515S 0137516S 0137517S 0137518S 0137519S 0137520S 0137521S 0137522S 0137523S 0137524S 0137525S
17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50
length mm
weight g
article no
size Inch/”
320 320 350 350 350 350 370 370 370 370 370 400 400 400 400 400 400 430 430 430 430 470 470 500 500 530
295 295 510 510 510 510 715 715 715 715 715 1145 1145 1145 1145 1145 1145 1540 1540 1540 1540 2090 2090 2970 2970 3900
0137526S 0137527S 0137528S 0137529S 0137530S 0137531S 0137532S 0137533S 0137534S 0137535S 0137536S
11/ 7/
16
8
15/
16
1. 1/16 1. 3/16 1. 1/4 1. 7/16 1. 1/2 1. 5/8 1. 13/16 2
length mm
weight g
290 355 355 380 410 380 460 460 510 550 550
295 510 510 715 715 1145 1540 1145 2090 2970 3900
31
SPECIAL WRENCHES
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Hose coupling wrench A-B-C – DIN 14822 –
article no
Ø mm
7030455S
14
Adjustable hook wrench
length mm
weight g
article no
Ø mm
440
800
0913275S 0915012S 0911117S
32 – 75 50 – 120 115 – 170
Hose coupling wrench B-C
length mm
weight g
205 285 310
230 450 500
length mm
weight g
110 110 135 135 170 170 205 205 240 240 280 280 335 335 390 390 465 465
30 30 50 50 100 100 190 190 215 200 410 410 730 730 1150 1150 1410 1385
Hook wrench – DIN 1810 –
article no
Ø mm
7030285S
12
34
length mm
weight g
280
450
article no
Ø mm
0901214S 0901620S 0902528S 0903032S 0903436S 0904042S 0904550S 0905255S 0905862S 0906875S 0908090S 0909510S 0909700S 0909800S 0909900S 0909990S 0909991S 0909992S
12 – 14 16 – 20 25 – 28 30 – 32 34 – 36 40 – 42 45 – 50 52 – 55 58 – 62 68 – 75 80 – 90 95 – 100 110 – 115 120 – 130 135 – 145 155 – 165 180 – 195 205 – 220
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Valve Wheel Hook
Valve wheel wrench – DIN 87311 –
article no
size mm
7000500S
30 – 40
length mm
weight g
article no
500
720
7013660S 7014880S 7014810S
Ø mm
36 x 60 48 x 80 62 x 102
length mm
weight g
370 430 550
650 1300 2600
Valve Wheel Hook B-valve wheel wrench
article no
Ø x distance mm
length mm
weight g
7021330S 7021335S 7021640S 7021645S 7021950S 7022260S 7022570S 7022880S
13 x 30 13 x 35 16 x 40 16 x 45 19 x 50 22 x 60 25 x 70 28 x 80
300 350 400 450 500 600 700 800
350 600 680 1100 1200 2000 3000 5300
article no
Ø mm
9991010S 9991011S 9991012S
36 x 60 48 x 80 62 x 102
length mm
weight g
330 470 600
600 1400 2600
Wrench for valve of tanktruck Face spanner
article no
article no
pin distance
pin Ø
9991024S
35
5m
length mm weight g
180
Typ A 9991007S Typ B 9991008S Typ C 9991009S
outer pin mm dimension cut-out
20 20 20
160 x 90 150 x 90 190 x 90
64 x 32 64 x 32 95 x 47,5
handle weight g
500 500 500
1800 1600 2500
150
35
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Square point socket L-type
article no
size mm
0341110S 0341111S 0341112S 0341113S 0341114S 0341115S 0341116S
Triangle tube socket – DIN 22417 –
length mm
weight g
150 160 175 215 230 240 280
90 100 120 220 280 280 330
8 9 10 12 13 14 17
Triangle socket 1/2"
article no
0359502S 0359503S 0359504S 0359505S 0359506S 0359507S 0359508S
36
size
M 6 M 8 M10 M12 M16 M20 M24
length mm
weight g
40 40 40 40 50 50 60
70 75 80 90 150 215 435
article no
0300004S 0300005S 0300006S 0300008S 0300010S 0300012S 0300016S 0300020S 0300024S
size mm
M 4 M 5 M 6 M 8 M10 M12 M16 M20 M24
length mm
weight g
95 110 115 125 140 160 180 200 220
80 100 170 280 390 700 980 2100 3100
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Bung wrench universal
Special bung wrench
article no
length mm
weight g
article no
length mm
weight g
0150380S
380
1250
0150382S
400
1700
Manhole-hook
Bung wrench
article no
length mm
weight g
article no
length mm
weight g
0150381S
300
600
7240003S
500
770
article no
length mm
weight g
7240002S
700
1200
Manhole-hook strong pattern
37
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket wrench 6-point
article no
size mm
0251055S 0251056S 0251057S 0251058S 0251059S 0251060S 0251061S 0251062S 0251063S 0251064S 0251065S 0251066S 0251067S 0251068S 0251069S 0251070S 0251071S 0251072S 0251073S 0251074S 0251075S 0251076S 0251077S 0251078S 0251079S 0251080S 0251081S 0251082S 0251083S 0251084S 0251085S 0251086S 0251087S 0251088S 0251089S 0251090S 0251091S 0251092S 0251093S 0251094S 0251095S 0251096S 0251097S 0251098S 0251099S 0251100S
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50 52 54 55 56 58 60 63 65 67 70 71
38
length mm
weight g
article no
190 200 215 230 250 265 265 280 280 300 300 325 325 350 350 380 380 415 415 415 450 450 450 485 485 485 530 530 530 530 580 580 635 635 320 320 340 340 340 360 360 360 380 380 380 380
110 135 160 210 260 350 350 400 400 450 450 650 650 830 830 1140 1140 1450 1450 1450 1800 1800 1800 2450 2450 2450 3300 3300 3300 3300 4000 4000 4800 4800 4900 4900 6500 6500 6500 8300 8300 8300 10500 10500 10500 10500
0251101S 0251102S 0251103S 0251104S 0251105S 0251106S 0251107S 0251108S 0251109S 0251110S
size mm
75 77 80 82 85 88 90 94 95 100
length mm
weight g
400 400 400 400 425 425 425 455 455 455
14300 14300 14300 14300 19200 19200 19200 26000 26000 26000
Bar for socket wrench 6-point
article no
Ø mm
0251111S 0251112S 0251113S 0251114S 0251115S 0251116S 0251117S 0251118S 0251119S 0251120S 0251121S 0251122S
6 8 10 10 12 16 16 20 24 24 30 36
up to SW mm
10 12 16 22 27 34 38 47 63 63 82 100
length mm weight g
150 190 190 250 315 400 500 630 800 1000 1250 1600
40 75 90 185 310 600 920 1600 3100 3850 7500 15000
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket wrench L-type 6-point
article no
size mm
0340008S 0340009S 0340010S 0340011S 0340012S 0340013S 0340014S 0340015S 0340016S 0340017S 0340018S 0340019S 0340020S 0340021S 0340022S 0340023S 0340024S 0340025S 0340026S 0340027S 0340028S 0340029S 0340030S 0340032S 0340033S 0340034S 0340035S 0340036S 0340037S 0340038S 0340041S 0340042S 0340046S 0340047S 0340050S 0340052S 0340054S 0340055S 0340056S 0340058S 0340060S 0340063S 0340065S 0340067S 0340070S 0340071S 0340075S 0340077S 0340080S 0340082S
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50 52 54 55 56 58 60 63 65 67 70 71 75 77 80 82
Socket wrench 6-point Double ended
length mm
weight g
article no
175 185 195 205 220 240 240 250 250 270 270 290 290 310 310 335 335 365 365 365 395 395 395 425 425 425 465 465 465 465 510 510 555 555 605 605 660 660 660 730 730 730 800 800 800 800 880 880 880 880
100 120 140 180 220 280 280 300 300 320 320 530 530 680 680 830 830 1000 1000 1000 1300 1300 1300 1700 1700 1700 2800 2800 2800 2800 3600 3600 4000 4000 4800 4800 6400 6400 6400 8200 8200 8200 10400 10400 10400 10400 14100 14100 14100 14100
0340083S 0340084S 0340085S 0340086S 0340087S 0340088S 0340089S 0340090S 0340091S 0340092S 0340093S 0340094S 0340095S 0340096S
size mm
7 x 8 9 x 10 10 x 11 12 x 14 14 x 17 17 x 19 19 x 22 20 x 22 24 x 26 24 x 27 27 x 32 30 x 32 30 x 36 36 x 41
length mm
weight g
95 105 120 135 150 160 170 170 180 190 200 210 220 230
50 70 85 160 205 280 335 355 480 530 870 890 1080 1700
Bar for double ended socket wrench 6-point
article no
Ø mm
up to SW mm
length mm
weight g
0340097S 0340098S 0340099S 0340100S 0340101S 0340102S
5 6 10 12 15 16
7 x 8 10 x 11 14 x 17 20 x 22 24 x 27 36 x 41
110 150 220 300 390 500
15 40 120 300 480 750
Further dimensions on request!
39
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket wrench 6-point with t-handle
article no
0340108S 0340109S 0340110S 0340111S 0340112S 0340113S 0340114S 0340115S 0340116S 0340117S 0340118S 0340119S 0340120S 0340121S 0340122S 0340123S 0340124S 0340125S 0340126S 0340127S 0340128S 0340129S 0340130S 0340132S 0340133S 0340134S 0340135S 0340136S 0340137S 0340138S 0340141S 0340142S 0340146S 0340147S 0340150S 0340152S 0340154S 0340155S 0340156S 0340158S 0340160S 0340163S 0340165S 0340167S 0340170S
40
size mm
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 37 38 41 42 46 47 50 52 54 55 56 58 60 63 65 67 70
length mm
weight g
article no
196 209 223 240 256 275 275 292 292 314 314 339 339 376 376 393 393 431 431 431 464 464 464 506 506 506 550 550 550 550 600 600 655 655 345 345 365 365 365 390 390 390 410 410 410
140 165 190 260 310 410 410 455 455 555 555 785 785 1050 1050 1240 1240 1700 1700 1700 2100 2100 2100 2750 2750 2750 4000 4000 4000 4000 5400 5400 6000 6000 6300 6300 8000 8000 8000 10500 10500 10500 14000 14000 14000
0340171S 0340175S 0340177S 0340180S 0340182S
size mm
71 75 77 80 82
length mm
weight g
410 430 430 430 430
14000 19000 19000 19000 19000
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Pin wrench 6-point
article no
0341035C 0341040C 0341045C 0341050C 0341055C 0341060C 0341065C 0341070C 0341075C 0341080C 0341090C 0341010C 0341011C 0341012C 0341013C 0341014C 0341015S 0341016S 0341017S
size mm
Claw spanner without bar
length mm
weight g
article no
175 180 180 185 190 190 190 200 200 210 210 220 220 230 230 240 240 250 250
55 55 60 60 65 65 80 80 100 100 115 115 130 170 210 210 235 235 240
0137600S 0137601S 0137602S 0137603S 0137604S 0137605S 0137606S 0137607S 0137608S 0137609S 0137610S 0137611S 0137612S 0137613S 0137614S 0137615S 0137616S 0137617S 0137618S 0137619S 0137620S 0137621S 0137622S
3,5 4 4,5 5 5,5 6 6,5 7 7,5 8 9 10 11 12 13 14 15 16 17
Pin wrench 6-point Inch
size mm
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 36 41 46 50
length mm
weight g
160 160 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 315 315 315 315
100 100 170 170 190 220 250 260 300 350 400 400 450 450 500 550 600 650 700 1150 1230 1500 1600
Bar for claw spanner article no
size Inch/”
0341091C 0341092C 0341093C 0341094C 0341095C 0341096C 0341097C 0341098C 0341099C 0341100S 0341101S 0341102S
1/ 5/ 3/ 7/ 1/ 5/ 3/ 7/ 1/ 9/ 5/
8 32 16 32 4 16 8 16 2 16
8 11/ 16
length mm
weight g
175 180 185 190 190 210 220 230 230 240 250 250
55 55 60 65 80 100 115 170 210 235 235 240
article no
0137623S 0137624S 0137625S 0137626S 0137627S 0137628S 0137629S
size mm
8 x 160 10 x 200 12 x 200 14 x 250 16 x 250 18 x 315 20 x 315
length mm
weight g
13 – 15 16 – 18 19 – 22 23 – 27 28 – 32 36 – 41 46 – 50
70 130 220 400 600 1000 1600
41
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Crow foot spanner 1/2"
Ratchet wrench 6-point
article no
size mm
weight g
article no
size mm
0137630S 0137631S 0137632S 0137633S 0137634S 0137635S 0137636S 0137637S 0137638S 0137639S 0137640S 0137641S 0137642S 0137643S 0137644S 0137645S 0137646S 0137647S 0137648S 0137649S 0137650S 0137651S 0137652S
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 36 41 46 50
50 50 80 80 80 110 120 130 150 170 200 200 220 220 250 270 300 320 350 570 620 750 800
0137400S 0137401S 0137402S 0137403S 0137404S 0137405S 0137406S 0137407S 0137408S 0137409S 0137410S 0137411S
17 19 21 22 24 26 27 30 32 35 36 41
Special extension for crowfoot spanner 1/2"
article no
length mm
weight g
0137653S 0137654S
150 250
200 400
Further dimensions on request! 42
length mm
weight g
230 240 250 260 270 280 285 300 315 325 330 330
620 650 830 830 1020 1050 1100 1320 1425 1630 1670 1950
length mm
weight g
150 150 155 155 200 200 220 220 245 280 280 290 295 360 360 440 440
125 125 160 160 260 260 340 340 560 840 840 1180 1230 2060 2230 2900 2900
Ratchet wrench 12-point
article no
size mm
0137416C 0137402C 0137405C 0137409C 0137400C 0137401C 0137403C 0137404C 0137406C 0137407C 0137408C 0137410C 0137411C 0137412C 0137413C 0137414C 0137415C
9 11 13 14 17 19 22 24 27 30 32 36 41 46 50 55 60
SOCKET SETS & ACCESSOIRES
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket 6-point
Extension bar
1/ 4" article no
0350414C 0354514C 0350514C 0355514C 0350614C 0350714C 0350814C 0350914C 0351014C 0351114C 0351214C 0351314C 0351414C
drive Inch/” 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
size mm
4 4,5 5 5,5 6 7 8 9 10 11 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4
length mm weight g
25 25 25 25 25 25 25 25 25 25 27 27 27
13 14 14 14 12 14 17 19 20 24 29 28 30
article no
drive Inch/”
length mm
weight g
0421430C 0421410C 0421420C
1/
55 100 200
20 60 100
1/ 1/
4 4 4
Hinged handle
Ratchet
article no
drive Inch/”
length mm
weight g
0360014C
1/
150
165
4
article no
drive Inch/”
length mm
weight g
0410014C 0410015C
1/
4
165 215
160 350
article no
drive Inch/”
length mm
weight g
0400014C
1/
200
160
1/
4
T-handle
Ratchet with square coupler
article no
drive Inch/”
length mm
weight g
0360141C
1/
150
320
44
4
4
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Square point handle
Universal joint 1/ 4"
article no
drive Inch/”
length mm
0400015C
1/
140
4
weight g
article no
drive Inch/”
length mm
65
0400018C
1/
55
4
weight g
55
Convert coupler 1/4 fi 1/2"
article no
drive Inch/”
length mm
0400016C
1/
30
4
weight g
40
Coupler Socket set 1/4" • 16pcs
article no
0400017C
drive Inch/” 1/
4
length mm
25
weight g
8
article no
content
0430001C
1 plastic case 1 ratchet 1 extension bar each 1 pc. Socket
dimension
weight g
240 x 180 x 60 mm
1/
875
4"
100 mm
1/
4"
4 – 4,5 – 5 – 5,5 6 – 7 – 8 – 9 – 10 11 – 12 – 13 – 14 mm
Other combinations on request!
45
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket 6-point
Socket 6-point Inch
1/ 2" article no
0350612S 0350712S 0350812S 0350912S 0351012S 0351112S 0351212S 0351312S 0351412S 0351512S 0351612S 0351712S 0351812S 0351912S 0352012S 0352112S 0352212S 0352312S 0352412S 0352512S 0352612S 0352712S 0352812S 0352912S 0353012S 0353212S 0353412S 0353612S 0354112S
46
drive Inch/” 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
size mm
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 36 41
length mm weight g
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 42 50 50 50
50 55 50 50 50 50 50 50 55 55 60 65 75 85 95 100 110 120 125 130 145 150 175 185 195 240 300 380 450
article no
0350100S 0350101S 0350102S 0350103S 0350104S 0350105S 0350106S 0350107S 0350108S 0350109S 0350110S 0350111S 0350112S 0350113S 0350114S 0350115S 0350116S 0350117S 0350118S 0350119S 0350120S
drive Inch/” 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
2 2
size Inch/” length mm weight g 1/ 5/
4 16
2
11/
2
3/
8
2
13/
2
7/
16
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
1/ 9/
32 32
2
16 19/ 32 5/ 8 11/ 16 3/ 4 25/ 32 13/ 16 7/ 8 15/ 16
1 1. 1/16 1. 1/8 1. 3/16 1. 1/4
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 42
50 50 50 50 50 50 50 55 55 60 65 85 95 95 110 120 130 150 175 195 240
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket 6-point long pattern
Ratchet 1/ 2"
article no
0350001S 0350002S 0350003S 0350004S 0350005S 0350006S 0350007S 0350008S 0350009S 0350010S 0350011S 0350012S 0350013S 0350014S 0350015S 0350016S 0350025S
drive Inch/” 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
size mm
10 12 13 14 15 16 17 18 19 21 22 24 27 30 32 34 36
length mm weight g
77 77 77 77 77 77 77 82 82 82 82 82 82 82 82 82 82
110 135 105 110 120 125 140 145 180 205 210 250 285 345 375 415 425
article no
drive Inch/”
length mm
weight g
0360012C
1/
250
590
2
Ratchet with square coupler
article no
drive Inch/”
length mm
weight g
0360121C
1/
250
430
2
47
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Extension bar
Convert coupler 1/2 fi 3/4"
1/ 2" article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0420002S 0421434S 0420121S
1/
100 200 250
180 315 360
0400116S
1/
2
22
120
article no
drive Inch/”
length mm
weight g
0400119S
1/
2
40
article no
drive Inch/”
length mm
0400117S
1/
36,5
1/ 1/
2 2 2
Reducer 1/2 fi 1/4"
Hinged handle
article no
drive Inch/”
length mm
weight g
0410012S 0410013S 0410016S 0410101S
1/
215 250 300 380
350 560 920 590
1/ 1/ 1/
2 2 2 2
60
Coupler
T-handle
article no
drive Inch/”
length mm
weight g
0400114S 0400012S
1/
250 320
450 550
48
1/
2 2
2
weight g
46
Further dimensions on request!
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Universal joint
Sliding T-wrench 1/ 2"
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0400118S
1/
70
135
0370012S
1/
245
500
2
Offset handle
2
Hinged handle with t-handle
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0400120S 0400121S
1/
220 260
260 400
0400123S
1/
460
755
1/
2 2
Torque wrench
Speed handle
article no
drive Inch/”
length mm
weight g
0400122S
1/
410
615
2
2
article no
drive Inch/”
9991082C
1/2"
Nm
30-150
weight g
1500
49
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket sets 1/ 2" article no
content
0430005S
1 plastic case 1 ratchet 1 extension bar each 1 pc. Socket
weight g
12pcs
1/
2000
2"
100 mm
1/
2"
10 – 11 – 13 – 14 – 15 17 – 19 – 22 – 24 mm
0430004S
1 plastic case 1 ratchet each 1 pc. Socket
24pcs
1/ 1/
4100
2" 2"
10 – 11 – 12 – 13 – 14 – 15 16 – 17 – 18 – 19 – 20 – 21 22 – 23 – 24 – 25 – 26 – 27 28 – 29 – 30 – 32 mm
0430010S
1 plastic case 1 ratchet 1 extension bar each 1 pc. Socket
25pcs
1/
4100
2"
250 mm
1/
2"
10 – 11 – 12 – 13 – 14 – 15 16 – 17 – 18 – 19 – 20 – 21 22 – 23 – 24 – 25 – 26 – 27 28 – 29 – 30 – 32 mm
0430002S
1 plastic case 1 ratchet 1 extension bar 1 sliding tee 1 hinged handle each 1 pc. Socket
27pcs
1/
5300
2"
250 mm 320 mm 380 mm 1/ 2" 10 – 11 – 12 – 13 – 14 – 15 16 – 17 – 18 – 19 – 20 – 21 22 – 23 – 24 – 25 – 26 – 27 28 – 29 – 30 – 32 mm
Other combinations on request!
50
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Screwdriver socket
Screw driver socket – with hexagon bit –
1/ 2" article no
drive Inch/”
0440000S 0440001S 0440002S 0440003S
1/ 1/ 1/ 1/
2 2 2 2
blade mm
4 6 8 10
length mm weight g
60 60 60 60
140 140 140 140
Cross slot screw driver socket
article no
0440008S 0440009S 0440010S 0440011S 0440012S 0440013S 0440014S 0440015S 0440016S 0440017S 0440018S
drive Inch/” 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
2 2 2 2 2 2 2 2 2 2 2
size mm
4 5 6 7 8 9 10 12 14 17 19
length mm weight g
60 60 60 60 60 60 60 60 60 60 60
65 70 70 75 80 85 95 115 145 205 230
Screw driver socket long pattern – with hexagon bit – article no
drive Inch/”
0440004S 0440005S 0440006S 0440007S
1/ 1/ 1/ 1/
2 2 2 2
blade mm
1 2 3 4
length mm weight g
60 60 60 60
140 140 140 140 article no
0440028S 0440029S 0440030S 0440031S 0440032S 0440033S 0440034S 0440035S 0440036S 0440037S 0440038S
drive Inch/” 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
2 2 2 2 2 2 2 2 2 2 2
size mm
5 5 6 6 6 7 8 8 10 12 14
length mm weight g
90 180 90 140 160 90 90 120 140 140 140
90 125 80 120 135 90 90 105 150 190 250
Further dimensions on request! 51
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Screw driver socket sets – with hexagon bit –
1/ 2" article no
content
weight g
0440039S
1 wooden case 10pcs 1240 each 1 pc. socket 1/2" 5–6–7–8–9 10 – 12 – 14 – 17 mm
0440040S
1 wooden case 12pcs 2990 1/ 1 ratchet 2" 1 extension bar 250 mm each 1 pc. socket 1/2" 5–6–7–8–9 10 – 12 – 14 – 17 mm
0440041S
1 wooden case 16pcs 2790 each 1 pc. socket 1/2" 5–6–7–8–9 10 – 12 – 14 – 17 mm each 1 pc. socket 1/2" 5-90, 6-90, 8-90, 10-140 12-140, 14-140
Other combination on request!
52
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket 6-point
Socket 6-point Inch 3/ 4"
article no
0351834S 0351934S 0352134S 0352234S 0352434S 0352534S 0352634S 0352734S 0352834S 0352934S 0353034S 0353234S 0353334S 0353434S 0353534S 0353634S 0353834S 0354134S 0354234S 0354634S 0355034S 0355534S 0355834S 0356034S
drive Inch/” 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/
size mm
length mm weight g
18 19 21 22 24 25 26 27 28 29 30 32 33 34 35 36 38 41 42 46 50 55 58 60
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
60 60 60 60 55 55 50 50 50 50 50 60 60 60 55 60 60 65 65 65 70 70 60 70
180 180 180 180 350 350 330 300 300 300 310 375 450 465 400 430 490 560 600 655 785 900 950 1290
Ratchet
article no
0356035S 0356036S 0356037S 0356038S 0356039S 0356040S 0356041S 0356042S 0356043S 0356044S 0356045S 0356046S 0356047S 0356048S 0356049S 0356050S 0356051S
drive Inch/” 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/
size Inch/” length mm weight g 7/
4
15/
4
8
16
1 1. 1/16 1. 1/8 1. 1/4 1. 5/16 1. 3/8 1. 7/16 1. 1/2 1. 9/16 1. 5/8 1. 11/16 1. 3/4 1. 13/16 1. 7/8 2
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
60 55 55 50 50 60 60 55 60 60 65 65 65 65 65 70 70
180 350 350 300 300 375 400 400 430 490 560 560 600 655 655 700 785
Ratchet with square coupler
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0360034C
3/
300
1900
0360134C
3/
300
1800
4
4
53
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Extension bar
Convert coupler 3/4 fi 1"
3/ 4" article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0400124S 0420003S 0420134S 0400126S
3/
100 250 380 430
350 700 1670 1500
0400131S
3/
4
61
325
article no
drive Inch/”
length mm
weight g
0400135S
3/
4
57
165
article no
drive Inch/”
length mm
weight g
0400132S
3/
51,5
135
3/ 3/ 3/
4 4 4 4
Reducer 3/4 fi 1/2"
Hinged handle
article no
drive Inch/”
length mm
weight g
0410034S 0400128S 0400129S
3/
380 460 550
755 1300 1950
3/ 3/
4 4 4
Coupler
Sliding t-handle
article no
drive Inch/”
length mm
weight g
0400130S 0400034S
3/
260 500
600 1480
54
3/
4 4
4
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Universal joint
Sliding t-wrench 3/ 4"
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0400133S 0400134S
3/
85 106
550 570
0370034S
3/
260
850
3/
4 4
Hinged handle with t-handle
Offset handle
article no
drive Inch/”
length mm
weight g
0400136S
3/
300
800
4
4
article no
drive Inch/”
length mm
weight g
0400138S
3/
560
1200
4
Speed handle
article no
drive Inch/”
length mm
weight g
0400137S
3/
380
1250
4
55
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Screw driver socket – with hexagon bit –
3/ 4"
Socket set 3/4" • 12pcs
article no
content
0430003S
1 wooden case 1 ratchet 1 extension bar 1 sliding tee 1 hinged handle each 1 pc. Socket
weight g
3/
12700 4"
380 mm 500 mm 380 mm 3/ 4" 36 – 38 – 41 – 46 50 – 55 – 60 mm
Other combinations on request!
56
article no
drive Inch/”
0440043S 0440045S 0440046S 0440047S 0440104S 0440105S 0440107S 0440108S 0440109S 0440110S 0440111S
3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/
4 4 4 4 4 4 4 4 4 4 4
blade mm length mm
14 17 19 22 24 27 30 32 36 41 46
80 80 80 80 80 80 80 80 80 90 90
weight g
350 390 435 480 520 550 570 590 620 720 820
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Socket 6-point
Socket 6-point Inch 1"
article no
drive Inch/”
size mm
0353201S 0353601S 0354101S 0354201S 0354601S 0355001S 0355501S 0356001S 0356501S 0357001S 0357501S 0358001S 0358501S 0359001S 0359501S 0354001S
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
32 36 41 42 46 50 55 60 65 70 75 80 85 90 95 100
length mm weight g
60 65 70 65 65 70 75 75 75 85 85 85 90 85 85 85
510 550 730 710 710 930 1130 1350 1500 1750 2300 2500 2800 4400 4500 4600
Ratchet
article no
drive Inch/”
0354002S 0354003S 0354004S 0354005S 0354006S 0354007S 0354008S 0354009S 0354010S 0354011S 0354012S 0354013S 0354014S 0354015S 0354016S 0354017S 0354018S 0354025S 0354019S 0354020S 0354021S 0354022S 0354023S 0354024S
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
size Inch/” length mm weight g
1. 7/16 1. 1/2 1. 5/8 1. 11/16 1. 13/16 1. 7/8 2 2. 1/16 2. 3/16 2. 1/4 2. 3/8 2. 7/16 2. 9/16 2. 5/8 2. 3/4 2. 13/16 2. 15/16 3 3. 1/8 3. 3/8 3. 1/2 3. 3/4 3. 7/8 4. 1/4
65 65 70 65 65 65 70 70 75 75 75 75 75 75 85 85 85 85 85 90 90 90 90 90
550 680 730 710 710 730 930 950 1130 1130 1350 1400 1500 1550 1750 1750 2300 2350 2500 2800 4400 4500 4600 5000
Ratchet with square couple
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0360100C
1
550
3400
0361100C
1
550
3500
57
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Extension bar
Coupler
1"
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0421510S 0421520S 0421522S
1 1 1
100 250 400
800 1400 2090
0400140S
1
68
325
Universal joint Hinged handle
article no
drive Inch/”
length mm
weight g
0410100S
1
380
1200
article no
drive Inch/”
length mm
weight g
0400141S
1
141
1450
article no
drive Inch/”
length mm
weight g
0400142S
1
75
540
Reducer 1 fi 3/4"
Sliding t-handle
article no
drive Inch/”
length mm
weight g
0400139S
1
700
3985
58
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Offset handle
Screw driver socket – with hexagon bit –
1"
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
0400143S
1
300
1000
0440048S 0440049S 0440050S 0440051S 0440052S 0440100S 0440101S 0440102S 0440103S 0440112S
1 1 1 1 1 1 1 1 1 1
Speed handle
article no
drive Inch/”
length mm
weight g
0400144S
1
380
1400
Hinged handle with t-handle
size mm
drive Inch/”
length mm
weight g
0400145S
1
660
1700
90 90 90 90 90 90 90 90 100 100
580 665 710 765 860 910 950 990 1200 1400
Socket sets 1" • AF
article no
content
0430006S
1 wooden case 1 ratchet each 1 pc. Socket
1 extension bar 1 extension bar each 1 pc. Socket
article no
17 19 22 24 27 30 32 36 41 46
length mm weight g
0430007S
1 wooden case 1 ratchet each 1 pc. Socket
1 extension bar 1 extension bar
weight g
24pcs 33100 1" 1" 36 – 41 – 46 – 50 – 55 – 60 65 – 70 – 75 – 80 mm 250 mm 400 mm 1" 1. 1/2 – 1. 5/8 – 1. 7/8 – 2 2. 1/16 – 2. 1/4 – 2. 3/8 2. 9/16 – 2. 3/4 – 3 14pcs 21100 1" 1" 36 – 41 – 46 – 50 – 55 – 60 65 – 70 – 75 – 80 mm 250 mm 400 mm
Other combination on request! 59
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Impact socket 6-point – with groove and continuous bore hole, heavy duty –
Impact socket 6-point long pattern – with groove and continuous bore hole, heavy duty –
1/ 2" article no
drive Inch/”
0351028S 0351029S 0351030S 0351031S 0351032S 0351033S 0351034S 0351035S 0351036S 0351037S 0351038S 0351039S 0351040S 0351024S 0351027S 0351015S 0351016S
1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
size mm
10 11 12 13 14 15 16 17 18 19 21 22 23 24 27 30 32
length mm weight g
35 35 40 40 40 40 40 40 40 40 40 40 40 48 45 45 45
80 80 85 85 85 90 90 120 125 125 125 120 140 160 190 210 220
article no
drive Inch/”
0351041S 0351042S 0351043S 0351044S 0351045S 0351046S 0351047S 0351048S 0351049S 0351051S 0351052S 0351053S 0351054S 0351017S 0351018S
1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
size mm
8 10 13 14 16 17 18 19 21 22 23 24 27 30 32
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
length mm weight g
85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
120 140 175 185 245 250 265 270 305 330 350 370 435 460 490
Impact socket – with hexagon bit –
60
article no
drive Inch/”
0351055S 0351056S 0351057S 0351058S 0351059S 0351060S 0351061S 0351019S 0351020S 0351021S 0351022S 0351023S
1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/
2 2 2 2 2 2 2 2 2 2 2 2
size mm
5 6 8 10 12 14 17 22 24 27 30 32
length mm weight g
44 44 44 44 50 50 50 50 60 60 60 60
63 65 75 90 125 130 150 170 210 240 260 270
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Impact extension bar
Impact universal joint 1/ 2"
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0351110S 0351062S 0351063S
1/
100 200 250
250 380 470
0351066S
1/
72
175
1/ 1/
2 2 2
2
Impact snap ring Impact convert coupler 1/2 fi 3/4"
article no
drive Inch/” 1/
0351064S
2
length mm
45
weight g
145
article no
drive Inch/”
0351067S 0351068S
1/ 1/
2 2
size mm
up to size 14 from size 15
Ø mm weight g
19 24
5 15
Impact safety pin
Impact reducer 1/2 fi 1/4"
article no
drive Inch/”
length mm
0351065S
1/
44
2
article no
drive Inch/”
0351069S 0351070S
1/
size mm
Ø mm weight g
up to size 14 from size 15
3 x 20 3 x 25
weight g
25
1/
2 2
10 15
61
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Impact socket 6-point – with groove and continuous bore hole, heavy duty –
Impact socket 6-point long pattern – with groove and continuous bore hole, heavy duty –
3/ 4" article no
drive Inch/”
0351071S 0351072S 0351073S 0351074S 0351075S 0351076S 0351077S 0351078S 0351079S 0351080S 0351081S 0351082S 0351083S 0351109S 0351204S 0351205S 0351206S
3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
size mm
17 18 19 22 24 27 30 32 33 34 36 38 41 46 50 55 60
length mm weight g
45 45 45 48 55 55 50 55 52 55 60 58 65 65 72 76 82
295 305 305 350 340 380 400 480 425 475 600 485 800 950 1300 1470 1720
article no
drive Inch/”
0351084S 0351085S 0351086S 0351087S 0351088S 0351089S 0351090S 0351091S 0351092S 0351093S 0351094S 0351095S 0351114S 0350122S 0350123S 0350124S
3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/ 3/
size mm
17 19 21 22 24 27 30 32 33 34 36 41 46 50 55 60
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
length mm weight g
90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
745 730 750 750 735 665 625 795 715 860 745 925 1150 1610 1800 2150
Impact socket – with hexagon bit –
62
article no
drive Inch/”
0351096S 0351097S 0351098S 0351099S
3/ 3/ 3/ 3/
4 4 4 4
size mm
14 17 19 22
length mm weight g
50 50 50 50
295 335 345 395
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Impact extension bar
Impact universal joint 3/ 4"
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
length mm
weight g
0351101S 0351102S 0351103S 0351111S
3/
100 250 380 430
400 1300 1500 2100
0351106S
3/
110
620
Ø mm
weight g
36
5
3/ 3/ 3/
4 4 4 4
4
Impact snap ring Impact convert coupler 3/4 fi 1"
article no
drive Inch/”
length mm
weight g
0351104S
3/
65
455
4
article no
drive Inch/”
0351107S
3/
4
Impact safety pin Impact reducer 3/4 fi 1/2"
article no
drive Inch/”
length mm
weight g
0351105S
3/
65
355
4
article no
drive Inch/”
Ø mm
weight g
0351108S
3/
4 x 35
5
4
63
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Impact socket 6-point – with groove and continuous bore hole, heavy duty –
Impact socket 6-point long pattern – with groove and continuous bore hole, heavy duty –
1"
article no
drive Inch/”
0351115S 0352400S 0352700S 0353000S 0353200S 0351120S 0351121S 0353600S 0351123S 0354100S 0351125S 0354600S 0355000S 0355500S 0356000S 0356500S 0357000S 0357500S 0358000S
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
size mm
length mm weight g
22 24 27 30 32 33 34 36 38 41 42 46 50 55 60 65 70 75 80
55 60 65 60 57 59 59 70 62 70 62 80 70 90 90 90 95 95 96
615 515 700 705 700 715 750 870 800 805 865 1420 1250 1930 2100 2300 2400 3200 3750
article no
drive Inch/”
0351134S 0351135S 0351136S 0351137S 0351138S 0351139S 0351140S 0351141S 0351142S 0351143S 0351144S
1 1 1 1 1 1 1 1 1 1 1
size mm
22 24 27 30 32 33 34 36 38 41 46
length mm weight g
100 100 100 100 100 100 100 100 100 100 100
1140 1250 1230 1185 1150 1185 1140 1160 1260 1300 1495
Impact socket – with hexagon bit –
Impact extension bar
article no
drive Inch/”
length mm
weight g
0351151S 0351152S 0351153S
1 1 1
100 250 400
850 1550 2050
64
article no
drive Inch/”
0351145S 0351146S 0351147S 0351148S 0351149S 0351025S 0351026S 0351128S
1 1 1 1 1 1 1 1
size mm
22 24 27 30 32 36 41 46
length mm weight g
80 80 80 80 80 100 100 100
605 650 655 675 660 1050 1100 1250
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Impact convert coupler
Impact snap ring
1 fi 1 . 1/2"
1"
article no
drive Inch/”
length mm
weight g
article no
drive Inch/”
0351154S
1
115
1105
0351157S 0351158S
1 1
Impact reducer
0351155S
drive Inch/”
1
Ø mm weight g
up to size 70 from size 75+80
45 75
10 25
Impact safety pin
1 fi 3/4"
article no
size mm
length mm
75
weight g article no
drive Inch/”
0351159S 0351160S
1 1
size mm
Ø mm weight g
660 up to size 70 5 x 45 from size 75+80 6 x 75
5 15
Impact universal joint Impact safety pin
article no
drive Inch/”
length mm
weight g
0351156S
1
141
1430
article no
drive Inch/”
0351181S 0351182S 0351195S
1. 1/2 1. 1/2 2. 1/2
size mm
up to size 90 from size 95 from size 95
Ø mm
6 x 75 8 x 110 8 x 110
weight g
15 40 40
65
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Impact socket 6-point – with groove and continuous bore hole, heavy duty –
Impact socket 6-point long pattern – with groove and continuous bore hole, heavy duty –
1½" 2½" article no
drive Inch/”
size mm
0350121S 0351116S 0351117S 0351118S 0351119S 0351122S 0351124S 0351126S 0351127S 0358500S 0359000S 0359500S 0351000S 0351050S 0351100S 0351150S 0351200S 0351250S
1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2
41 46 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125
length mm weight g
80 80 82 88 91 95 100 105 110 120 120 125 125 125 135 135 145 145
2180 2245 2350 2475 2755 3225 3595 3720 4345 5075 5630 7765 8380 9550 10615 10800 11785 11900
drive Inch/”
0351179S 0351180S 0351194S
1. 1/2 1. 1/2 2. 1/2
size mm
0351178S 0351193S
2. 1/
up to size 90 from size 95 from size 95
66
1. 1/2 1 2 fi 1. /2
0351161S 0351162S 0351163S 0351164S 0351165S 0351166S 0351167S 0351168S 0351169S 0351170S 0351171S 0351172S 0351173S 0351174S 0351175S 0351176S 0351177S
1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2 1. 1/2
41 46 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120
length mm weight g
140 140 140 140 140 140 140 140 140 140 140 150 150 150 160 160 170
4420 4420 4255 4330 4710 5005 5250 5465 5615 6175 6825 10260 10395 11430 12855 12680 14380
Ø mm weight g
75 114 114
25 40 40
1. 1/2 fi 1"
drive Inch/”
size mm
– with groove and continuous bore hole, heavy duty –
Impact reducer
article no
drive Inch/”
Impact socket 6-point
Impact snap ring
article no
article no
length mm
weight g
95 145
2300 6200
article no
drive Inch/”
size mm
0351183S 0351184S 0351185S 0351186S 0351187S 0351188S 0351189S 0351190S 0351191S 0351192S
2. 1/2 2. 1/2 2. 1/2 2. 1/2 2. 1/2 2. 1/2 2. 1/2 2. 1/2 2. 1/2 2. 1/2
75 80 85 90 95 100 105 110 115 120
length mm weight g
120 120 130 130 130 140 140 150 150 155
9600 10100 10000 10100 11200 12050 12600 13800 14100 15000
SCREWDRIVERS & HEX KEYS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Screwdriver
Electrician’s screwdriver
article no
blade mm
blade length mm
weight g
article no
blade mm
blade length mm
weight g
0803075C 0804510C 0804515C 0806010C 0806015C 0808015C 0801020C 0801030C
3 4,5 4,5 6 6 8 10 10
75 100 150 100 150 150 200 300
30 55 60 80 85 145 185 230
0800380C 0800480C 0800580C 0800680C 0800780C
3 4 5 6 6,5
75 150 150 200 300
25 55 75 110 150
Cross slot screwdriver
article no
0810000C 0810010C 0810020C 0810030C 0810040C
68
PH
blade length mm
0 1 2 3 4
60 80 100 150 200
weight g
35 60 90 165 270
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Sets of screwdrivers
article no
content
weight g
0800001C
screwdriver each 1 pc. 3,0 x 75 mm 4,5 x 100 mm 6,0 x 150 mm 8,0 x 150 mm
4pcs
315
0800002C
screwdriver each 1 pc. 4,5 x 100 mm 6,0 x 100 mm 6,0 x 150 mm 8,0 x 150 mm
6pcs
515
10pcs
1200
4pcs
585
cross slot screwdriver PH each 1 pc. PH 1 PH 2
0800003C
screwdriver each 1 pc. 4,5 x 100 mm 4,5 x 150 mm 6,0 x 100 mm 6,0 x 150 mm 8,0 x 150 mm 10,0 x 200 mm cross slot screwdriver PH each 1 pc. PH 1 PH 2 PH 3 PH 4
0800004C
cross slot screwdriver each 1 pc. PH 1 PH 2 PH 3 PH 4
Isolated screwdrivers on request! 69
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Torx-screwdriver
article no
blade mm
0807005C 0807006C 0807007C 0807008C 0807009C 0807010C 0807015C 0807020C 0807025C 0807027C 0807030C 0807040C 0807045C 0807050C
T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45 T50
Hex key screwdriver 90° angled
bladelength mm
70 70 70 70 70 80 80 90 90 110 110 120 120 120
weight g
article no
blade mm
bladelength mm
weight g
30 32 32 32 32 41 45 48 52 78 84 115 136 150
0251038S 0251039S 0251040S 0251041S 0251042S 0251499S 0250500S
3 4 5 6 8 10 12
75 x 20 75 x 25 80 x 28 80 x 32 120 x 36 120 x 40 120 x 45
25 40 50 75 140 220 290
Ball ended screwdriver
Hex key screwdriver
article no
blade mm
bladelength mm
weight g
0251043S 0251044S 0251045S 0251046S 0251047S 0251048S 0252056S
3 4 5 6 8 10 12
100 100 100 125 150 150 150
35 50 60 90 140 210 280
70
article no
blade mm
bladelength mm
weight g
0807055C 0807060C 0807065C 0807070C 0807075C 0807080C 0807085C
3 4 5 6 8 10 12
100 100 100 125 150 150 150
35 50 60 90 140 210 280
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Sets of hex keys
article no
Sets of hex keys long pattern
content
weight g
article no
0250005S
1 wallet 8 pcs hex key long pattern: 2 – 2,5 – 3 – 4 – 5 6 – 8 – 10 mm
9pcs
400
0250004S
1 wallet 9 pcs hex key: 1,5 – 2 – 2,5 – 3 – 4 5 – 6 – 8 – 10 mm
10pcs
464
0250001S
1 wallet 8 pcs hex key: 2 – 2,5 – 3 – 4 – 5 6 – 8 – 10 mm
9pcs
245
0250003S
1 wallet 10pcs 9 pcs hex key: 1,5 – 2 – 2,5 – 3 – 4 – 5 6 – 8 – 10 mm
205
Sets of hex key Inch
article no
0250002S
content
1 wallet 10 pcs hex key: 1/ 5 3 1 5 16" – /64" – /32" – /8" – /32" 7 1 5 3 3/ 16" – /32" – /4" – /16" – /8"
weight g
Sets of hex key with ball end
11pcs with wallet
article no
content
content
weight g
weight g
178
0250066C
1 wallet 8 pcs hex key with ball end: 2 – 2,5 – 3 – 4 – 5 6 – 8 – 10 mm
9pcs
250
0250067C
1 wallet 9 pcs hex key with ball end: 1,5 – 2 – 2,5 – 3 – 4 5 – 6 – 8 – 10 mm
10pcs
260
71
ENDRES TOOLS
GmbH
- SAFETY FIRST article no
SW Inch/”
length mm
weight g
Hex key – similar DIN 911 –
article no
SW mm
0250015C 0250020C 0250025C 0250030S 0250040S 0250050S 0250060S 0250070S 0250080S 0250090S 0250100S 0250110S 0250120S 0250130S 0250140S 0250170S 0250180S 0250190S 0250220S 0250240S 0250270S 0250300S 0250320S 0250360S 0250410S
length mm
1,5 2 2,5 3 4 5 6 7 8 9 10 11 12 13 14 17 18 19 22 24 27 30 32 36 41
55 55 55 60 70 80 90 95 100 105 120 119 125 132 140 160 170 180 200 224 250 280 315 355 400
weight g
3 2 4 7 12 20 33 45 65 85 100 130 165 200 250 405 500 570 950 1250 1800 2500 3100 4500 5300
Hex key Inch – similar DIN 911 –
article no
0251001C 0251002C 0251003C 0251004C 0251005C
72
SW Inch/” 3/ 1/ 5/ 3/ 1/
64 16 64 32 8
length mm
55 55 55 55 60
weight g
1 2 2 4 7
5/
0251006C 0251007S 0251008S 0251009S 0251010S 0251011S 0251012S 0251013S 0251014S 0251015S 0251016S 0251017S 0251018S 0251019S 0251020S 0251021S 0251022S 0251023S 0251024S 0251025S 0251026S 0251027S
3/ 7/ 1/ 5/ 3/ 7/ 1/ 9/ 5/
32 16 32 4 16 8 16 2 16
8 11/ 16 3/ 4 7/ 8
1 1. 1. 1. 1. 1. 1. 1. 1.
1/ 1/ 1/ 5/ 3/ 7/ 1/ 5/
16 8 4 16 8 16 2 8
70 80 80 90 100 120 119 125 140 140 160 180 200 224 216 230 230 235 235 241 241 241
12 20 20 33 65 100 130 165 250 266 405 570 950 1260 3080 3300 3300 3520 3520 3740 3740 3740
length mm
weight g
126 142 160 180 200 224 250 280 320 360
6 12 18 30 70 120 190 300 380 490
Hex key long pattern
article no
SW mm
0251030S 0251031S 0251032S 0251033S 0251034S 0251035S 0251036S 0251037S 0251123S 0251124S
3 4 5 6 8 10 12 14 17 19
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Hex key with ball end
article no
bladelength mm
0251500C 0252000C 0252500C 0250003C 0250004C 0250005C 0250006C 0250007C 0250008C 0250010C 0250012C 0250014C
45 50 55 63 70 80 90 95 100 115 130 140
Hex key with t-handle
SW mm
weight g
article no
bladelength mm
1,5 2,0 2,5 3 4 5 6 7 8 10 12 14
4 3 5 7 12 20 32 42 60 106 205 255
0251049S 0251050S 0251051S 0251052S 0251053S 0251054S 0250055S 0250056S
100 100 100 100 100 100 100 100
bladelength mm
0250115C 0250016C 0250017C 0250018C 0250019C 0250120C 0250021C 0250022C 0250023C
126 140 160 180 190 200 224 250 290
weight g
3 4 5 6 8 10 12 14
31 38 61 71 97 157 198 246
SW mm
weight g
3 4 5 6 8 10 12 14
34 43 69 83 118 191 247 312
Hex key with t-handle long pattern
Hex key with ball end long pattern
article no
SW mm
SW mm
weight g
3 4 5 6 7 8 10 12 14
8 18 31 51 75 101 176 292 370
article no
bladelength mm
0250057S 0250058S 0250059S 0250061S 0250062S 0250063S 0250064S 0250065S
150 150 150 150 150 150 150 150
73
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Hex key with ball end and t-handle
article no
bladelength mm
0807090C 0807091C 0807092C 0807093C 0807094C 0807095C 0807096C 0807097C
100 100 150 150 150 200 200 200
Square key
SW mm
weight g
article no
SW mm
length mm
weight g
3 4 5 6 8 10 12 14
31 38 69 83 118 225 295 380
0140010S 0140011S 0140012S 0140013S 0140014S 0140015S 0140016S 0140017S 0140018S 0140019S 0140020S 0140021S 0140022S 0140024S 0140025S 0140027S 0140028S 0140030S 0140032S
10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 27 28 30 32
200 200 200 200 220 220 220 250 250 250 300 300 300 360 360 360 440 440 440
200 200 200 200 400 400 400 600 600 600 1000 1000 1000 1600 1600 1600 3200 3200 3200
blade mm
weight g
4 6 10 13
25 35 90 240
Offset screw driver
article no
0831250S 0831300S 0831400S 0831900S
74
length mm
125 130 140 190
PLIERS & SCISSORS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Adjustable pipe wrench
article no
0530230S 0530300S 0530385S 0530460S 0530625S 0530850S 0531205S
opening max. Inch 3/ 4 1 1. 1/2 2 2. 1/2 3. 1/2 5
Swedish plier
length mm
weight g
article no
230 300 385 460 625 850 1205
600 1125 1370 2450 4050 7350 13800
0510010C 0510015C 0510020C 0510030C 0510040C
opening max. Inch
1 1. 1/2 2 3 4
length mm
weight g
320 430 540 700 790
820 1570 3200 4100 6200
Swedish plier with mole 90° angled Monkey wrench
article no
article no
0554000S 0555000S 0556000S 0557000S 0558000S 0559000S 0551000S 0551050S
76
opening max. mm
38 45 48 58 65 70 80 105
length mm
weight g
240 240 290 350 350 425 500 575
420 470 780 1000 1200 1600 2200 3700
0510115C 0510120C
opening max. Inch
1. 1/2 2
length mm
weight g
430 540
1570 3200
Adjustable wrench
article no
opening max. mm
length mm
weight g
0481500C 0482000C 0482500C 0483000C 0483800C 0484500C 0486000C
18 26 30 36 46 53 67
150 200 250 300 380 450 600
100 200 400 700 1400 2700 5100
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Chain pipe wrench light pattern
Combination plier
article no
for Ø max. mm
length mm
weight g
article no
length mm
weight g
7220001S 7220002S 7220003S 7220004S
50 100 150 450
600 600 600 1600
1700 2500 3000 8000
0601600C 0602000C
160 200
350 425
Combination plier isolated
Chain pipe wrench heavy duty
article no
for Ø max. mm
length mm
weight g
0520510S 0520685S 0520915S 0521830S
38 65 100 300
510 685 915 1830
2650 4500 11500 30300
article no
length mm
weight g
1601000C
200
390
Adjustable combination plier Gas pipe plier
article no
Ø mm
0652100C
40
length mm
weight g
210
370
article no
length mm
weight g
1602000C
200
340
77
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Diagonal cutting plier
Waterpump plier
article no
length mm
weight g
article no
0661650C
165
200
0502500C 0503000C 0504000C
Diagonal cutting plier heavy duty
30 50 110
length mm
weight g
250 300 400
370 560 1680
Waterpump plier with box joint
article no
length mm
weight g
0662650C
190
290
Diagonal cutting plier heavy duty isolated
article no
opening max. mm
length mm
weight g
0602500C
30
250
350
Round nose plier
article no
length mm
weight g
0662651C
190
290
78
opening max. mm
article no
length mm
weight g
0621200C 0621600C
120 160
90 160
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Pincer
Long nose plier with cutter
article no
length mm
weight g
article no
length mm
weight g
0612000C 0612300C
200 230
430 520
0631800C
180
300
Long nose plier with cutter isolated
Pincer heavy duty
article no
length mm
weight g
0611750C
175
260
article no
length mm
weight g
0631802C
180
255
Long nose plier with cutter and 45° angled top
Flat nose plier
article no
length mm
weight g
0641200C 0641600C
120 160
50 150
article no
length mm
weight g
0631801C
180
245
79
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Wire stripping plier
Bolt cutter
article no
length mm
weight g
article no
length mm
weight g
0611550C
170
260
9991031C
620
3400
Circlip plier for external rings
article no
0680310C 0681025C 0681960C 0684010C 0688516C 0681253C
for Ø mm
3-10 10-25 19-60 40-100 85-165 125-300
Crimping plier
length mm
140 140 180 225 310 500
weight g
110 120 220 300 700 1200
article no
length mm
weight g
0621001C
200
120
Set of pliers Circlip plier for internal rings
article no
0690825C 0691960C 0694010C 0698516C 0691253C
80
for Ø mm
8-25 19-60 40-100 85-165 125-300
length mm
weight g
140 180 225 290 500
120 220 300 700 1200
article no
content
7250008C
Combination plier 200 mm Waterpump plier 250 mm Diagonal cutting plier 165 mm Long nose plier 180 mm
weight g
1500
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Tin snip
Multipurpose snip
article no
length mm
weight g
article no
length mm
weight g
0702800C
300
450
0712100C
210
300
Tin snip heavy duty
Cutting shear
article no
length mm
weight g
article no
length mm
weight g
0702750C
280
520
0712000C
220
225
81
HAMMER, CHISELS & PUNCHES
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Machinist’ hammer with hickory handle
Hammer with hickory handle – similar DIN 1042 –
– similar DIN 1041 –
article no
weight g
article no
weight g
1000100S 1000150S 1000200S 1000300S 1000400S 1000500S 1000600S 1000700S 1000800S 1000900S 1001000S 1001250S 1001500S 1002000S
100 150 200 300 400 500 600 700 800 900 1000 1250 1500 2000
1042500S 1043000S 1044000S 1045000S 1046000S 1048000S 1049000S 1041000S 1041200S 1041500S
2500 3000 4000 5000 6000 8000 9000 10000 12000 15000
Hammer with fiberglass handle – similar DIN 1042 –
Machinist’ hammer with fiberglass handle – similar DIN 1041 –
article no
weight g
1000300F 1000400F 1000500F 1000800F 1001000F 1001500F 1002000F
300 400 500 800 1000 1500 2000
article no
weight g
1043000F 1044000F 1045000F 1048000F 1041000F
3000 4000 5000 8000 10000
Further dimensions with fiberglass handle on request! 84
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Sledge hammer with hickory handle
Minehammer with hickory handle
article no
weight g
article no
weight g
1031000S 1031250S 1031500S 1032000S 1032500S 1033000S 1034000S 1035000S 1036000S 1038000S 1031100S
1000 1250 1500 2000 2500 3000 4000 5000 6000 8000 10000
1131000S 1131500S 1132500S 1133500S 1135000S 1138000S
1000 1500 2500 3500 5000 8000
Minehammer with fiberglass handle Sledge hammer with fiberglass handle
article no
weight g
1031000F 1031250F 1031500F 1032000F 1032500F 1033000F 1034000F 1035000F 1036000F 1038000F 1031100F
1000 1250 1500 2000 2500 3000 4000 5000 6000 8000 10000
article no
weight g
1131000F 1131500F 1132500F 1133500F 1135000F 1138000F
1000 1500 2500 3500 5000 8000
85
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Ball pein hammer with hickory handle american type
Riveter with hickory handle
article no
weight g
article no
weight g
1020100S 1020150S 1020200S 1020300S 1020400S 1020500S 1020600S 1020700S 1020800S 1020900S 1021000S 1021300S 1021500S 1022000S
100 150 200 300 400 500 600 700 800 900 1000 1300 1500 2000
1081500S
1500
Cross pein hammer with hickory handle american type
article no
weight g
1090700S 1091200S 1091600S
700 1200 1600
86
Clubhammer with hickory handle
article no
weight g
1161000S 1162000S 1163000S 1165000S
1000 2000 3000 5000
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Double face machinist’ hammer with hickory handle
Bricklayer’s hammer with hickory handle
american type
– similar DIN 5108 –
article no
weight g
article no
weight g
1120100S 1120300S 1120500S 1120600S 1120800S 1120900S 1121100S
100 300 500 600 800 900 1100
7010600S 7010800S 7010900S
600 800 1000
Bricklayer’s hammer with hickory handle american type Claw hammer with hickory handle
article no
weight g
1060300S 1060400S 1060500S 1060600S
300 400 500 600
article no
weight g
7030700S
700
Scaling hammer with hickory handle
article no
weight g
1050200S 1050400S 1050500S 1050600S 1050800S 1050900S 1051400S
200 400 500 600 800 900 1400
87
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Mallet with hickory handle
Rubber mallet with ash tree handle
article no
weight g
article no
weight g
7020900S 7021800S 7022700S
900 1800 2700
7060400S 7060700S 7061000S
400 700 1000
Cutoff hammer with hickory handle
Wooden mallet made of European beech
article no
weight g
article no
weight g
7041300S 7042100S
1300 2100
7070210S 7070265S
210 265
Punch hammer with hickory handle
article no
Ø mm
weight g
7050800S 7051800S 7051200S 7052200S
8 10 12 16
800 800 1200 1200
88
ENDRES TOOLS
GmbH
- SAFETY FIRST -
POWER DRIVE Dead Blow hammers
Powerdrive dead blow with compact synthetic tops
All Power Drive Dead Blow Hammers are made in USA with Nuplaglas fibreglass handles. The patented shot-loaded composite interior cavities are encased in a tough polymer outer jacket, resulting in 40 % more driving power and less rebound than any hammer of its kind.
article no
surface Ø mm
The specially engineered striking face material provides extreme surface protection and incredible durability.
STPN16 STPN24
16 mm compact face 24 mm compact face
weight g
450 675
Brass and non-sparking faces are available.
SPI Holder non rebound without tip
Powerdrive dead blow
article no
surface Ø mm
weight g
SFN1SG SFN2SG SFN3SG SFN4SG
40 50 60 70
800 1000 1300 1600
article no
surface Ø mm
weight g
SPI106N SPI156N SPI206N SPI256N SPI306N
25 40 50 65 75
350 500 1000 2000 3000
Suitable tips look on page 90
SPS Holder non-sparking without tip Extreme powerdrives with non sparking surface article no
article no
surface Ø mm
weight g
SDSFB-2SG
50
1000
SPS105N SPS150N SPS155N SPS200N SPS205N SPS250N SPS255N SPS300N SPS305N SPS306N SPS307N
surface Ø mm
25 40 40 50 50 65 65 75 75 75 75 Suitable tips look on page 90
weight g
250 450 300 700 1000 1150 1950 1500 3000 3400 3700
89
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Tips 25 mm Ø
Tips 65 mm Ø
for SPI 106 N SPS 105 N
for SPI 256 N SPS 250 N SPS 255 N
article no
colour
10H-N 10M-N 10S-N 10SN-N 10T-N 10XH-N
hardness
hard medium soft mediumsoft tough extra hard
weight g
40 40 40 40 40 40
article no
colour
hardness
25H-N 25M-N 25S-N 25SN-N 25T-N 25XH-N
hard medium soft mediumsoft tough extra hard
weight g
70 70 70 70 70 70
Tips 40 mm Ø for SPS 150 N SPS 155 N SPI 156 N article no
colour
15B-N 15H-N 15M-N 15SN 15SN-N 15T-N 15XH-N
Tips 75 mm Ø
hardness
weight g
brass hard medium soft mediumsoft tough extra hard
100 40 40 40 40 40 40
for SPS 305 N SPS 307 N SPI 306 N article no
30H-N 30M-N 30S-N 30SN-N 30T-N 30XH-N
colour
hardness
hard medium soft mediumsoft tough extra hard
weight g
240 240 270 270 280 310
Tips 50 mm Ø for SPS 200 N SPS 205 N SPI 206 N article no
20B-N 20H-N 20M-N 20S-N 20SN-N 20T-N 20XH-N
colour
hardness
weight g
brass hard medium soft mediumsoft tough extra hard
130 90 90 90 100 100 100
soft
mediumsoft
medium
tough
hard
extra hard
brass
90
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Flat chisel oval form
article no
length mm
1150150S 1150200S 1150250S 1150300S 1150400S 1150450S 1150500S
150 200 250 300 400 450 500
Cape chisel oval form
blade mm
weight g
article no
length mm
20 25 25 25 30 30 30
200 320 550 560 630 750 920
1160150S 1160200S 1160250S 1160300S
150 200 250 300
blade mm
weight g
8 8 8 10
250 340 480 640
Cape chisel 6-point Bricklayers’ chisel 6-point – similar DIN 7254 –
article no
length mm
7090006S 7090008S 7090010S 7090014S 7090200S 7090250S 7090140S 7090017S 7090170S 7090300S 7090020S 7090002S 7090350S 7090400S 7090023S 7090022S 7090500S 7090600S 7090027S 7090050S
200 150 150 150 200 250 300 150 250 300 200 250 350 400 250 300 500 600 250 300
blade mm
weight g
6 8 10 14 14 14 14 17 17 17 19 19 19 19 22 22 22 22 27 32
35 40 120 200 250 300 400 300 450 550 500 600 850 1000 850 1000 1600 2000 580 850
article no
length mm
7100200S 7100250S 7100300S 7100400S
200 250 300 400
mm
weight g
14 14 17 19
270 330 550 960
Point chisel 6-point
article no
length mm
7080200S 7080250S 7080300S 7080400S
200 250 300 400
mm
weight g
14 14 17 19
270 330 550 960
91
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Splitting chisel flat
article no
1150001S 1150002S 1150003S
length mm blade mm
200 250 300
height mm weight g
25 25 25
5 5 5
360 460 550
Concrete chisel b
a
article no
length mm
form mm a x b
weight g
7110380S
380
45 x 33
5000
Hand guard for chisel grooved
article no
Ø mm
1222607S
26 x 7
92
form
flat/oval
weight g
145
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Punch conical
Double end scriber
– similar DIN 6458 – d
S article no
length mm
1201900S 1202250S
190 225
Ø mm
4 6
weight g
article no
length mm
S Ø mm
d Ø mm
weight g
50 50
1180010S 1180020S 1180030S 1180040S 1180050S 1180060S 1180070S 1180080S 1180090S 1180100S 1180120S 1180140S 1180160S 1180180S 1180200S 1180220S
120 120 120 120 120 120 120 120 150 150 160 160 200 200 200 200
1 2 3 4 5 6 7 8 9 10 12 14 16 18 20 22
8 8 8 8 10 10 10 10 13 13 16 16 20 20 24 24
35 35 35 40 60 60 65 65 135 140 220 230 500 500 620 640
Offset pin
article no
length x width mm
Ø mm
weight g
1950300S 1950400S 1950401S 1950402S 1950403S 1950404S 1950405S 1950406S 1950407S
300 x 100 450 x 150 450 x 150 450 x 150 450 x 150 450 x 150 500 x 150 600 x 200 800 x 200
13 19 16 24 27 30 16 20 22
200 1300 930 2000 2300 3300 1300 2400 3400
Punch conical heavy duty
d
S
Square blade awl
article no
bladelength mm
0810060S
100
article no
length mm
S Ø mm
d Ø mm
weight g
1180011S 1180012S 1180013S 1180014S 1180130S
150 150 200 250 250
6 7 8 12 13
13 17 21 24 30
100 100 395 645 865
weight g
80
93
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Punch conical
Pin-Set
machinist’extra strong
d
S article no
length mm
S Ø mm
d Ø mm
weight g
1180500S 1181000S 1180015S
220 230 250
5 10 13
16 19 24
255 420 880
article no
content
weight g
1180001S
5 punches 1 – 2 – 3 – 4 – 5 mm 1 punch 4 mm in wallet
310
Driftpin barrel type S d
S article no
length mm
S Ø mm
d Ø mm
weight g
1180004S 1180005S 1180006S 1180007S 1180008S 1180009S
200 200 200 200 200 200
8 8 10 13 18 22
17 21 24 27 30 32
230 360 415 630 880 1050
Pin punch – similar DIN 6450 – d
S
Center punch
article no
length mm
1170100S 1170110S 1170125S 1170150S
100 110 125 150
94
Ø mm
weight g
3 4 5 6
30 60 100 200
article no
length mm
S Ø mm
d Ø mm
weight g
1190150S 1190200S 1190300S 1190400S 1190500S 1190600S 1190800S 1191000S 1191300S 1191600S
110 110 110 120 130 140 150 160 180 200
1,5 2 3 4 5 6 8 10 13 16
10 10 10 10 10 10 12 12 16 16
45 50 45 50 50 60 100 120 240 400
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Pin punch
Setting punch
heavy duty
d d
S
S
article no
length mm
S Ø mm
d Ø mm
weight g
article no
length mm
S Ø mm
d Ø mm
weight g
1191500S 1190100S 1190013S 1190160S
150 180 200 300
6 10 13 16
14 14 18 20
120 160 290 655
1200005S 1200006S 1200080S 1200009S 1200100S 1200011S 1200012S 1200014S 1200015S 1200160S
180 200 200 200 230 250 280 320 350 380
5 6 8 9 10 11 12 14 15 16
12 13 16 20 22 25 27 30 32 36
110 150 220 340 460 620 870 1260 1570 2230
Pin punch set
Taper punch article no
content
1180002S
6 pin punches 3 – 4 – 5 – 6 – 8 – 10 mm in wallet
d
weight g
440 S
Pin straight
article no
length mm
S Ø mm
d Ø mm
weight g
1620500S
500
5
20
1200
– similar DIN 6459 – d
Thread-cleaning pin d
article no
length mm
d Ø mm
weight g
1200008S 1200010S 1200013S 1200016S 1200019S 1200021S 1200025S 1200029S
85 90 100 110 140 160 200 240
8 10 13 16 19 21 25 29
40 50 70 100 180 270 450 630
article no
1360006S 1360007S 1360008S
length mm
300 300 300
d Ø mm
weight g
6 10 13
75 180 350
95
KNIVES, SPATULAS & SCRAPERS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Caulking tool
Spatula flexible blade
article no
width mm
weight g
article no
length mm
width mm
weight g
1900002C 1900003C 1900004C 1900005C 1900006C 1900007C 1900008C 1900009C 1900010C 1900012C
2 3 4 5 6 7 8 9 10 12
370 410 390 520 420 500 520 520 525 540
1390040C 1390050C 1390060C 1390080C 1390090C 1390100C
210 210 210 230 230 230
40 50 60 80 90 100
75 80 95 90 115 125
article no
length mm
width mm
weight g
1400030S 1400040S 1400050S 1400060S 1400080S 1400090S 1400100S
210 220 220 220 240 240 240
30 40 50 60 80 90 100
110 120 150 165 190 215 240
Spatula stiff blade Knife
article no
0731800C
length mm
180
blade mm
80
weight g
75
Knife strong pattern
article no
length mm
blade mm
weight g
0731801S
300
200
300
98
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Scraper flexible blade
Deck scraper with handle
article no
length mm
width mm
weight g
article no
length mm
width mm
weight g
7230000C
175
78
125
1360380S
380
38
780
Spatula
Spray booth scraper
b a article no
length mm
a mm
b mm
weight g
article no
9991052S 9991053S 9991054S
260 350 490
25 40 50
150 230 355
85 145 275
7140001S
length mm
weight g
235
450
Flat scraper Deck scraper
article no
length mm
width mm
weight g
1360200S 1360255S 1360300S
200 255 300
22 45 50
210 480 570
article no
length mm
blade mm
weight g
1380200S
310
200
290
99
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Triangular scraper
Scraper optional with handle
article no
length mm
blade mm
weight g
article no
length mm
width mm
weight g
1372000S
310
200
220
1310750S 1311000S 1311250S 1311500S
220 220 220 220
75 100 125 150
580 830 880 1020
Ship scraper Scraper concave optional with handle
article no
length mm
blade mm
weight g
1355000S
420
100 x 70
650
article no
length mm
width mm
weight g
1321000S 1321500S
240 240
100 150
900 1350
Hand style scraper with handle Rust scraper with handle article no
length mm
width mm
weight g
7150001S
480
95
620
100
article no
length mm
width mm
weight g
1330600S 1330800S 1331000S 1331200S
600 800 1000 1200
75 75 75 75
530 620 740 1160
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Brick trowel
Joint trowel
article no
length mm
width mm
trowelwidth mm
weight g
article no
trowelwidth mm
weight g
1390130S 1390135S
335 360
130 135
215 240
350 540
1390010S
10
113
Scraper wide stiff blade
Plasters’ trowel
article no
length mm
width mm
weight g
1390280S
280
120
810
article no
length mm
width mm
weight g
7230012S 7230014S 7230016S 7230018S
195 195 205 205
120 140 160 180
250 270 300 350
Pointed trowel
article no
1390160S
trowelwidth mm
160
weight g
180
101
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Pick scraper
article no
length mm
1344800S
weight g
480
1200
Scraper, floor optional with handle
article no
length mm
width mm
weight g
1341500S
170
150
720
Deck scraper
article no
width mm
length mm
weight g
1310075S 1310125S
75 125
150 235
500 800
102
BRUSHES & SCRUBBERS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Wire brush tin bronze wire curled
article no
length mm
1750030S 1750040S 1750050S
350 350 350
Scrubbing broom round wire
rows
3 4 5
weight g
article no
dimension
190 210 190
1752450S
220 x 60 x 25
article no article no
length mm
width mm
weight g
1761800S
180
70
300
1770150S
article no
104
length mm
145
drive-Ø mm
22,2
Ø mm
weight g
150
520
Ø mm
weight g
125
700
Cup brush tin bronze wire curled
Brush, spark-plug cleaning round wire
1761900S
480
Wheel brush tin bronze wire curled
Brush tin bronze wire curled
article no
weight g
weight g
25
1780150S
drive-Ø mm
22,2
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Brush, tube wire curled
article no
Handbroom tin bronze wire curled
length mm
1790320S
300
weight g
article no
42
1750007S
Broom round wire
dimension
1753000S
310 x 55 x 150
1750006S
26
310
weight g
article no
length mm
1500
1750008S 1750009S 1750010S
290 290 290
Brush end wire curled
Ø mm
weight g
320
Handbrush tin bronze wire curled
article no
article no
length mm
rows
weight g
3 4 5
110 130 150
Rubber pusher made of wood with handle length drive mm
25
drive Ø
6
article no
length mm
weight g
1210735S
600
300
105
HATCHETS, SHOVELS, SPADES, PICKS & FORKS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Hoe
Firemens’ axe – similar DIN 14900 –
article no
length mm
width mm
weight g
article no
7160001S
950
120
2300
7170000S
Hatchet
article no
1451000S 1451500S
1467500S 1469000S
108
800
weight g
2600
Firemens’ hatchet made of CUBE with fiberglass handle
length mm
450 450
weight g
article no
1300 1500
1450900C
Axe
article no
length mm
length mm
750 900
weight g
1600 2200
length mm
400
weight g
900
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Miners’ pick
Hand pick
optional with handle
article no
length mm
width mm
weight g
article no
7170001S
380
225
1000
7190001S
weight g
length mm
400
2200
Pick with handle
Firemens’ hook – similar DIN 14851 –
article no
length mm
width mm
weight g
article no
length mm
width mm
weight g
7180001S
380
176
1800
1265600S
950
650
4100
Railroad pick with handle – similar DIN 20109 –
article no
length mm
width mm
weight g
1255801S 1255802S 1255800S
800 950 950
400 500 550
2150 3500 4000
109
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Edging spade
Square point shovel
L
L
article no
b
length L mm
1521160S 1521161S
180 1250 260 180 1250 260
b form of handle
weight g
article no
b length L mm
b form of handle
weight g
T D
3500 3650
1501280S 1501281S
240 1400 400 240 1150 400
straight D
1950 1950
Folding spade
Scoop shovel
b b
L
L
article no
b
length L mm
weight g
article no
b
length
1521260S
180
740 320
1300
1510540S
180
540
Round point shovel L
b article no
b length L mm
form of handle
weight g
1531250S 1531251S
260 1400 340 260 1150 340
straight D
1850 1850
110
L mm
220
weight g
720
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Rake with handle
Manure fork with handle b
article no
a x b mm
1511600S
230 x 330
a
length mm
weight g
article no
length mm
1600
1640
1511200S
1600
a
a mm
weight g
360
1530
Hedge shears
Garden fork with handle b
article no
a x b mm
1511000S
180 x 290
a
length mm
weight g
article no
bladelengh mm
weight g
1000
1265
0001001C
300
1400
Hay fork with handle b
a article no
a x b mm
length mm
weight g
1511100S
180 x 290
1600
1280
111
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Reaping hook
length mm
article no
0001002S
weight g
250
800
Fork for guncotton optional with handle
a
b
article no
a x b mm
length mm
weight g
1511300S 1511400S
90 x 140 150 x 250
200 370
600 1305
112
WEDGES & BARS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
B
Flange wedge
Space-wedge
B
H1
H
L
H2
L
article no
L x B x H mm
weight g
article no
L x B x H1 x H2 mm
weight g
1860010S 1860011S 1860001S 1860006S 1860002S 1860003S 1860007S 1860004S 1860012S 1860013S 1860008S 1860014S 1860015S 1860009S 1860016S 1860017S 1860005S
80 x 15 x 6 90 x 50 x 10 100 x 50 x 10 105 x 19 x 13 150 x 25 x 13 150 x 30 x 13 150 x 38 x 19 150 x 40 x 13 180 x 32 x 13 180 x 50 x 10 180 x 50 x 19 200 x 38 x 25 200 x 38 x 41 200 x 40 x 40 200 x 50 x 19 215 x 50 x 32 230 x 40 x 20
40 200 210 100 215 280 400 425 300 400 700 900 1300 1380 800 1400 1000
1861002S
250 x 50 x 5 x 1,5
200
Wedge with hole
d
Nosekey
b
e c
a
B
weight g
article no
dimensions mm
9991034S 1861001S 1861000S
a b c d e 340 x 20 x 40 x 20 x 20 340 x 30 x 40 x 20 x 20 400 x 30 x 40 x 40 x 15
2600 2800 3500
H
Stone wedge L
b
article no
L x B x H mm
hole-Ø mm
weight g
1851000S
100 x 30 x 15
6
220
114
L
article no
form mm L x b
weight g
7120001S 7120002S 7120003S 7120004S
120 x 44 150 x 45 190 x 47 240 x 50
1100 1400 2000 3000
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Gasket knife straight
Wrecking bar
b
a article no
length mm
a mm
b mm
weight g
article no
length mm
7200001S
400
25
220
300
1613000S 1614500S 1616000S 1617500S 1619000S
300 450 600 750 900
mm
weight g
14 19 19 22 22
400 1100 1500 2500 3000
mm
weight g
19 19 22 22 22 27 27 30 30
1100 1500 2500 3000 3300 6100 7300 11100 12300
Gasket knife round Pinch bar b
a article no
length mm
a mm
b mm
weight g
7200002S 7200003S
690 1240
30 40
400 800
1200 2000
Nail puller
article no
length mm
1610300S 1610450S 1610600S 1610750S 1610900S
300 450 600 750 900
mm
weight g
14 19 19 22 22
400 1100 1500 2500 3000
article no
length mm
1600450S 1600600S 1600750S 1600900S 1601000S 1601250S 1601500S 1601800S 1602000S
450 600 750 900 1000 1250 1500 1800 2000
115
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Pinch bar with point and edge
article no
length mm
1600001S 1600002S 1600003S 1600004S 1600005S
1000 1250 1500 1800 2000
Pinch bar with edge and ball
Ø mm
weight g
article no
length mm
30 30 30 30 30
6150 7700 9250 11100 12300
1600011S 1600012S 1600013S 1600014S 1600015S
1000 1250 1500 1800 2000
1600006S 1600007S 1600008S 1600009S 1600010S
length mm
1000 1250 1500 1800 2000
weight g
30 30 30 30 30
6150 7700 9250 11100 12300
Ø mm
weight g
30 30 30 30 30
6150 7700 9250 11100 12300
mm
weight g
Pinch bar with point and ball
Pinch bar with point and claw
article no
Ø mm
Ø mm
30 30 30 30 30
article no
length mm
1600016S 1600017S 1600018S 1600019S 1600020S
1000 1250 1500 1800 2000
weight g
6150 7700 9250 11100 12300
Crowbar
116
article no
length mm
1620650S 1620800S 1621000S 1621250S 1621500S
650 800 1000 1250 1500
20 x 20 20 x 20 20 x 20 25 x 25 25 x 25
2000 2700 3400 6200 7700
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Bending bar
Crate opener
d
S article no
length mm
S mm
d mm
weight g
article no
1632000S 1633000S 1634000S 1635000S 1636000S
200 300 400 500 600
5 5 5 5 5
19 19 19 19 19
660 1000 1300 1600 2000
7240001S
weight g
length mm
230
455
Carbide drum opener Tyre levers
0203000S article no
1630200S 1630305S 1630400S 1630500S 1630600S
length mm
200 300 400 500 600
1630610S
length mm
600
300
750
weight g
350 470 600 770 900
Tyre levers heavy duty offset
article no
weight g
length mm
article no
Barrel hook
article no
length mm
0920600S
1060
max kg
weight g
600
3800
weight g
1000
117
OTHER HANDTOOLS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Hack saw frame
Hand saw
article no
length mm
hack saw blade mm
weight g
article no
1100680S
560
300
900
1100681C
Hack saw blade for hack saw frame
article no
1110300C
120
length mm
300
length mm
370
weight g
500
Hand saw heavy duty
weight g
article no
30
9991024C
length mm
700
weight g
770
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Pipe cutter
Deep tension clamp
article no
length mm
max Ø mm
weight g
article no
length mm
throat depth mm
weight g
7710000S
430
50
2500
1800002S
480
250
3700
spread mm
weight g
Parallel vice
Clamp
article no article no
length mm
throat depth mm
weight g
1800180S 1800250S 1800430S
180 250 430
80 120 270
3160 4230 13500
Tension-clamp
jaw width mm
1560090S 1560125S 1560150S 1560170S
90 125 150 170
100 130 150 170
6500 15500 26500 27400
Bucket
article no
length mm
throat depth mm
weight g
article no
content l
1800001S
480
130
2100
7210001S 7210002S
10 12
material
brass aluminium
weight g
1460 740
121
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Flat file
Pocket-caliper made of brass
article no
length mm
cut
weight g
article no
nonius
length mm
weight g
1701265C 1703265C
265 265
1 3
330 330
2110000S
1/
150
165
length mm
weight g
235
135
Pocket-caliper made of plastic
Halfround file
article no
1711260C 1713260C
length mm
260 260
cut
article no
nonius
2100000S
1/
weight g
1 3
340 340
Round file
article no
length mm
cut
weight g
1721260C 1723260C
260 260
1 3
175 175
122
20 mm
20 mm –
1/
128
SPECIAL ARTICLES
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Screwdriver bits profile
Screwdriver bits slot
article no
size mm
1264045C 1264065C 1264080C
4,5 6,5 8,0
weight g
article no
5 8 10
1264101C 1264102C 1264103C 1264104C 1264105C 1264106C 1264107C
Screwdriver bits PH
size
T 10 T 15 T 20 T 25 T 27 T 30 T 40
weight g
5 10 20 30 35 40 55
Shackle
article no
1264001C 1264002C 1264003C 1264004C
size
PH 1 PH 2 PH 3 PH 4
weight g
5 8 10 13
article no
dimensions mm
weight g
1810002C 1810003C
30 x 40 37 x 78
100 150
Screwdriver bits 6-point Securing for hammers article no
size mm
1264030C 1264040C 1264050C 1264060C 1264070C 1264100C
3 4 5 6 7 10
124
weight g
4 5 5 7 7 9
article no
9991016S 9991017S
for weight
up to 2 kg 2-6 kg
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Hearing needle
article no
length mm
1810006C 1810007C 1810008C 1810009C
250 300 400 500
Tweezer made of plastic
Ø mm
weight g
article no
length mm
6 8 7 10
85 150 160 335
0731110S
100
weight g
15
Tweezer neat Hearing needle with ball end
article no
length mm
1810005C
500
weight g
Ø mm
6
article no
length mm
0731111S
150
weight g
30
130
Tweezer flat nose Needle
article no
length mm
Ø mm
1810004C
180
3
weight g
article no
length mm
0731112S
100
weight g
30
15
125
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Flange spreader
d
Drill bit
b
a
c b
c
length mm
weight g
article no
length mm
Ø mm
weight g
300
7200
9991060C 9991061C 9991062C 9991063C 9991064C 9991065C 9991066C 9991067C 9991068C 9991069C 9991070C 9991071C 9991072C 9991073C 9991074C
100 120 140 160 180 200 220 240 260 280 300 300 320 320 330
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20 30 50 75 100 120 170 220 280 360 440 500 600 700 800
cut width mm
weight g
article no
a
d
1860018S
60 60 40 46
Draw knife
article no
7240004S
length mm
650
250
1500
Manual portable oil pump Drill bit set 15pcs article no
length mm
weight g
9991057S
1350
5000
126
article no
content
9991075C
6/7/8/9/10/11/12/13/ 14/15/16/17/18/19/20 mm
weight g
4000
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Hydraulic palett truck
article no
weight g
9991081S
load capacity approx. 2000 kg 120000 length of gabs approx. 1100 mm length of guide bar approx. 1250 mm
Chain hoist
article no
9991018S 9991019S 9991020S 9991021S 9991022S 9991023S 9991055S 9991056S
lifting capacity in tons
0,5 1,0 1,5 2,0 3,0 5,0 10,0 16,0
2 chains à 2,5 m 2 chains à 2,5 m 2 chains à 2,5 m 2 chains à 2,5 m 2 chains à 3 m 2 chains à 3 m 2 chains à 3 m 2 chains à 3 m
weight g
10200 13600 15600 22000 23600 36000 68500 187000
127
FLASH LIGHTS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Infos for Ex-protection Explanation of the EX-characterization e.g. for 4AA-ES in Zone 1: Sign for the declaration of conformity of the supplier fort he marked of the European Union Ex in hexagonal means "explosion-proof"
II 2 G D Ex e ib IIC T4
Stands for ATEX-group II = for the mission outside of mines Stands for ATEX-group 2 (Zone 1) = normal operating condition Tested for gases and smokes Tested for dusts For the new European standards tested apparat for the use in explosive atmospheres Stands for increased safety: The beginning of sparks, arcs or incorrect temperatures, which can act as ignition source, is avoided by additionally action and an increased grade of safety Stands for intrinsic safety: The operating material which is used in explosion areas only have intrinsically circuits. A circuit is intrinsically, if a spark and no thermic effect appears, which can cause the spark ignition of a specified explosion atmosphere. Gas-group (in this case "acetylene & hydrogen") T (1, 2, 3, 4, 5, 6) is the temperature class of the lamp accordingly the maximum surface temperature of the reflector: T1 = 450° C, T2 = 300° C, T3 = 200° C, T4 = 135° C, T5 = 100° C, T6 = 85° C
Zone-definition
Z2
Z0
Z2
Z1
Z1 Z0
Zone 0 Zone 1 Zone 2
130
Danger of explosion is steadily or for long period existing, e.g. in the inside of gas tanks
In this zone you don’t stay
Danger of explosion can happen (10 to 1000 hours a year), e.g. in the near of filling hatch
e.g. chemical industry
Danger of explosion can happen only in exceptional cases, e.g. manufacturing rooms in chemical industry
Normal operating condition
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Torch UK Mini Pocket Light
Torch UK 2AAA Penlight ATEX
Small, handy pen torch. Ideal for maintenance and inspection work wherever explosion protection is required. This small and lightweight torch can be carried in your pocket like a ballpoint pen using the clip attached to the housing, and is therefore ready for use at all times. The lamp is available with a xenon or LED bulb. The xenon technology provides excellent luminance, and the LED version will provide light for an extremely long time with one battery charge. Both lamps are available with a rotating head switch or a rear switch. The rear switch ensures that the lamp can also be operated one-handed. Features: • 100% waterproof and dust-tight • Extremely bright xenon bulb in pre-focussed quality reflector • Rear switch or rotary head switch • Complies with CENELEC (CE) requirements • EEx-tested (Ex) in accordance with the latest European (ATEX) standards • Explosion protection class: II 2G Ex ib e IIC T5 Technical data: Alkaline batteries: 2 x AAA Luminance: 12 lumen Operating: 1.5-2 hrs. Dimensions: 120 x 17 x 15 mm Scope of delivery: Lamp with batteries, on blister
article no
item
9219070S 9219080S 9219020S 9219005S 9241002S
With rotary head switch, neon yellow With rear switch, neon yellow Spare reflector Optical fibre attachment Battery AAA/Micro/LR03
Extremely small and handy torch for keeping in your trouser pocket or on a key ring. Ideal for maintenance and inspection work, even if explosion protection is required. This small and lightweight torch can be attached to the peak of your cap, for example, using the provided clips, and will illuminate your working area without you having to use your hands. The lamp is available with a xenon or LED bulb. The xenon technology provides excellent luminance and is ATEX certified, and the LED version will provide light for an extremely long time with one battery charge. Both lamps can be switched on and off using the rotary head switch. Features: • 100% waterproof and dust-tight • Extremely bright xenon bulb in pre-focussed quality reflector • Rotary head switch • Complies with CENELEC (CE) requirements • EEx-tested (Ex) in accordance with the latest European (ATEX) standards • Explosion protection class: II 2G Ex ib e IIC T5 Technical data: Alkaline batteries: 2 x AAA Luminance: 12 lumen Operating: 1.5-2 hrs. Dimensions: 75 x 26 x 15 mm Scope of delivery: Lamp with batteries, key ring, belt clip on blister
weight g
article no
item
42 42 5 20 15
9219045S 9219020S 9219005S 9241002S
Xenon pocket light, neon yellow Spare reflector Optical fibre attachment Battery AAA/Micro/LR03
weight g
37 5 20 15
131
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Headlamp UK 3AAA LED ATEX VIZION [i]
Work light UK 300 ATEX
Revolutionary new headlamp concept from UK. The removable and individually usable insert is the special highlight of this new lamp. The lamp can be used in three modes using a rotating filter: focussed, diffused and red light. The module can be used individually when working in difficult areas or used as a tent lamp or reading lamp. The lighting duration is extremely long at 150 hrs, which is achieved using a special method that utilises the heat of the LED lamp to preserve the battery. This also improves operation at extremely low temperatures. The lamp can be switched in two stages. The extremely large switch can even be properly operated wearing thick gloves. The angle of the lamp on the head can also be properly adjusted using a large knob. In order to secure the lamp to a helmet easily and securely, the lamp is equipped with a head band made from special rubber. The rubber ensures that the head band cannot slip off a smooth surface such as helmets, but remains firmly anchored. Features: • White high-performance LED • 100% waterproof and dust-tight up to 10 m • 150 hours of constant brightness using the special electronics • Rubberised on/off switch • Complies with CENELEC (CE) requirements • EEx-tested (Ex) in accordance with the latest European (ATEX) standards • Explosion protection class: II 2G EX e ib IIC T4 / II 2D Ex ibD 21 T 98°C Technical data: Alkaline batteries: 3 x AAA Luminance: 42 lumen Operating: 150 hrs. Dimensions: 74 x 37 x 46 mm Scope of delivery: Headlamp with batteries, on blister
article no
9219569S 9219561S 9241002S
132
item
Vizion, black Vizion, neon yellow Battery AAA/Micro/LR03
weight g
110 110 15
The compact high-performance xenon work light with pressure relief valve that can withstand any professional requirement The almost unbreakable plastic housing has a sprung and non-slip belt and jacket clip for quick and secure attachment to work clothing. A steel karabiner ring and a hand strap with fastener are also provided. Features: • rotating head switch • Waterproof up to 3 m, and dust-tight • Robust ABS housing • Extremely bright xenon bulb in pre-focussed quality reflector • Pressure compensation valve • Non-conductive • Corrosion resistant • EEx-tested (Ex) in accordance with the latest European (ATEX) standards • Explosion protection class: II 2G Ex ib IIB T5 Technical data: Alkaline batteries: 3 x C Luminance: 53 lumen Operating: 4-6 hrs. Dimensions: 191 x 54 x 49 mm Scope of delivery: Lamp with batteries, in box article no
item
9219265S 9241010S
UK 300, neon yellow Battery C/Baby/LR14
weight g
500 67
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Helmet and work light UK 3AA eLED CPO
Helmet and work light UK 4AA eLED CPO
The new high-end model from the UK 3AA model series. This lamp has all of the newly-developed technical features such as CPO (Compound Path Optics) and TRS (Thermal Recovery System). Advantage of the (CPO) Compound Path Optics: Extremely efficient reflector technology in a confined space. The light of the extremely bright high-performance LED, which exits from the front, is first reflected back by a mirrored lens and then exits as a concentrated beam of light after being bundled by the reflector. Unwanted diffused light is therefore reduced to an absolute minimum. The spot remains clearly defined, but large enough to provide visibility in any situation. Advantage of the (TRS) Thermal Recovery System: Modern highperformance LED's lose power as they become hotter. On the other hand, the performance of the batteries deteriorates as the temperature drops. UK has now transformed these two characteristics into a positive effect with the Heat Recovery System. The system ensures that the heat that is given off by the LED is led to the batteries. The result: the light output of the LED's remains at the maximum level even for long periods, and the duration of use with batteries is increased by up to 10 %! This is the most powerful lamp in the UK 3AA product range, with luminous power of 110 lumen. The lamp is equipped with a rubberised rear switch that is easy to operate with your thumb. In combination with its extremely bright light, this also makes the lamp an interesting alternative for security forces. Of course, this lamp also has the option of switching on and off by rotating the top of the lamp. Features • White high-performance LED • 100% waterproof and dust-tight up to 3 m • LED life time approx 10.000 hrs • Rubberised on/off switch • Conductive • Corrosion resistant • Complies with CENELEC (CE) requirements • EEx-tested (Ex) in accordance with the latest European (ATEX) standards • Explosion protection class: II 2G Ex eib IIC T6 / II 2D Ex ibD 21 T61°C Technical data Alkaline batteries: 3 x AA Luminance: 110 lumen Operating: 6-8 hrs. Dimensions: 135 x 40 x 35 mm Scope of delivery: UK 3AA CPO TS/ES on blister card, with 3 AA batteries (Mignon) article no
item
9222062S
UK 3AA eLED CPO TS, rear switch, black with reflective stripes UK 3AA eLED CPO ES, front switch, black with reflective stripes Battery AA/Mignon/LR06
9222068S 9241006S
The new high-end model from the UK 4AA model series. This lamp has all of the newly-developed technical features such as CPO (Compound Path Optics) and TRS (Thermal Recovery System). Advantage of the (CPO) Compound Path Optics: Extremely efficient reflector technology in a confined space. The light of the extremely bright high-performance LED, which exits from the front, is first reflected back by a mirrored lens and then exits as a concentrated beam of light after being bundled by the reflector. Unwanted diffused light is therefore reduced to an absolute minimum. The spot remains clearly defined, but large enough to provide visibility in any situation. Advantage of the (TRS) Thermal Recovery System: Modern highperformance LED's lose power as they become hotter. On the other hand, the performance of the batteries deteriorates as the temperature drops. UK has now transformed these two characteristics into a positive effect with the Heat Recovery System. The system ensures that the heat that is given off by the LED is led to the batteries. The result: the light output of the LED's remains at the maximum level even for long periods, and the duration of use with batteries is increased by up to 10%! This is the most powerful lamp in the UK 4AA product range, with luminous power of 130 lumen. The lamp is equipped with a rubberised rear switch that is easy to operate with your thumb. In combination with its extremely bright light, this also makes the lamp an interesting alternative for security forces. Of course, this lamp also has the option of switching on and off by rotating the top of the lamp. Features • White high-performance LED • 100% waterproof and dust-tight up to 3 m • LED life time approx 10.000 hrs • Rubberised on/off switch • Conductive • Corrosion resistant • Complies with CENELEC (CE) requirements • EEx-tested (Ex) in accordance with the latest European (ATEX) standards • Explosion protection class: II 2G Ex eib IIC T4 / II 2D Ex ibD 21 T98°C Technical data: Alkaline batteries: 4 x AA Luminance: 130 lumen Operating: 8-10 hrs. Dimensions: 157 x 40 x 35 mm Scope of delivery: UK 4AA CPO TS/ES on blister card, with 4 AA batteries (Mignon)
weight g
article no
item
154
9219516S
154
9219517S
20
9241006S
UK 4AA eLED CPO TS, rear switch, black with reflective stripes K 4A eLED CPO ES, front switch, black with reflective stripes Battery AA/Mignon/LR06
weight g
180 180 20
133
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Helmet and work light UK 4AA EN Xenon
Helmet and work light UK 4AA eLED Zoom S/T
Basic configuration. Low-cost, reliable xenon technology for good light output and rotating head switch for switching on and off. Pure functionality. Nothing else! Technical data: Luminance: 38 lumen Operating: 4-5 hrs. Dimensions: 157 x 40 x 34 mm Explosion protection class: II 2G EX e ib IIC T4 II 2D Ex ibD 21 T 98° C Scope of delivery: UK 4AA-EN on blister card with 4 AA batteries (Mignon) article no
item
9222036S 9222042S 9241006S
EN Xenon, neon yellow Spare reflector UK4AA ES/EN/ET Battery AA/Mignon/LR06
The UK 4 AA eLED Zoom can now be ordered with either the welltried front switch or the new rear switch (model T). This makes it an excellent lamp for security forces. Of course, this lamp also has the option of switching on and off by rotating the top of the lamp.
weight g
154 10 20
Holster for UK 3AA and 4AA
article no
item
9219130S
EN Xenon, neon-yellow
The new improved version of the well-tried UK 4 AA eLED Zoom. Additional light efficiency by means of a much-improved highperformance LED and the improved explosion protection class emphasise this product's claim to be the standard in its performance class.
Technical data: Luminance: 90 lumen Operating: 10.5 hrs. Dimensions: 172 x 40 x 37 mm Explosion protection class: II 2G EX e ib IIC T4 II 2D Ex ibD 21 T 98°C Scope of delivery: UK 4 AA eLED Zoom S/T on blister card with 4 AA batteries (Mignon) article no
item
9222002S 9222008S 9222014S 9241006S
eLED Zoom S, front switch, neon yellow eLED Zoom T, rear switch, neon yellow Spare reflector Battery AA/Mignon/LR06
weight g
180 180 25 20
Universal helmet clip
weight g
50
3-piece plastic holder, suitable for the majority of helmets, many adjusting facilities, in blister pack, made in USA.
134
article no
weight g
9219125S
60
ENDRES TOOLS
GmbH
- SAFETY FIRST -
UK 4AA ES/ET Xenon
HAND SPOT LIGHT Eisemann HS 4 Ex
The best seller. The most frequently sold and widely used helmet lamp. Low-cost, reliable xenon technology for extremely good light efficiency. This light now also has improved explosion protection and an optional rear switch (ET model). Of course, both the rear switch and the front switch version can also be switched on and off using the rotating head. With individual lettering on request. Technical data: Luminance: 38 lumen Operating: 4-5 hrs. Dimensions: 157 x 40 x 34 mm Explosion protection class: II 2G EX e ib IIC T4 II 2D Ex ibD 21 T 98°C Scope of delivery: UK 4AA-ES/ET on blister card with 4AA batteries (Mignon) article no
item
9222020S 9222026S 9222042S 9241006S
ES, front switch, neon yellow ET, rear switch, neon yellow Spare reflector UK4AA ES/EN/ET Battery AA/Mignon/LR06
weight g
154 154 10 20
The portable lamp of line HS 4 Ex are explosion-proof and electrical equipment and serve for illumination of shops and offices of a factory and storages in areas of zone 1 and 2 where there is a danger of explosion. They can be used inside or outside. Features: • Robust impact resistant polyamide housing • Portable lamp for use in zones 1 and 2 • Explosion proof to II 2 G EEX ib e IIC T4 • Snap-on with eye • Maintenance free lead-acid battery • Increased, folding handle • Microprocessor controlled charging technology with battery indicator • With powerful halogen bulb • Thread breakage detection (automatic switchover to economy lamp) • Save of deep discharge • Flashlight with head lamp • Possible outside the hazardous area emergency light charger Technical data: Luminance: 9500 cd Main lamp: halogen 4V, 2W, 500 mA, E10 Saving lamp: bulb 3.7 V, 1.1 W, 300 mA, E10 Battery: Lead-acid battery, maintenance free, 4V, 3.5 Ah Operating time: approximately 6-7 hours Dimensions: 104 x 72 x 320 mm Scope of delivery: 1 x portable lamp HS 4Ex 1 x charger 1 x battery 1 x each orange and colorless prism-Washers 1 x cable 230V 1 x cable 12/24 article no
item
9219261S
HS4 Ex with battery and charger
weight g
2300
135
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Responder RA handlamp
The design of this battery-powered and explosionprotected portable lamp makes it a unique tool during operations. The RA responder can be optionally operated with a rechargeable 4.8 V NiCad battery pack or with four alkaline C batteries (Baby) – providing unique flexibility. The Responder RA provides more than two hours of light with the battery pack, with a charging time of two hours using the QuickCharger II, which is included in the scope of delivery. An additional five hours of light are available with battery operation. No risk of overcharging: The intelligent charging station continuously monitors the charge level of the batteries. The lamp can therefore be kept in the charging as an independent tool. The QuickCharger II charging station includes a spare NiCad battery pack as well as the lamp. The charging system is microprocessor-controlled, and has an LED status indicator. The robust plastic casing is water spray protected and extremely tough. It can withstand falls from heights of up to 10 m without sustaining damage. With the aid of the sturdy stainless steel jacket clips on the rear of the casing, the lamp can be simply secured to clothing during operations. This keeps the hands free. The lamp head contains two additional spare bulbs. This ensures that you always have a backup if the lamp fails. article no
item
9212440S
Responder RA with rechargeable battery and charger Responder RA with rechargeable battery without charger Responder RA with alkaline batteries Spare rechargeable battery pack Quick Charger II for a Responder RA Charging array for four Responder RA's
9212446S 9212448S 9212444S 9212442S 9212449S
136
weight g
1325 500 500 250 875 5500
Features: • Robust, indestructible, shockproof and water spray proof nylon housing • Sturdy jacket and belt clip on rear of casing • Can be operated with rechargeable battery pack or batteries • Explosion protection zone I: II 2 G EEx ib e IIB T3 • Two spare bulbs in lamp head • Universal charger 12/24/230 V • Spare rechargeable battery pack (optional) can be charged in charger simultaneously • Extremely good price/performance ratio Scope of delivery: 1 x Responder RA portable lamp 1 x NiCad rechargeable battery pack 1 x QuickCharger II universal charger 12/24/230 V 2 x spare bulbs in lamp head Technical data: Luminance: 45,000 Candela Rechargeable batteries: NiCad 4.8 V, 1.6 Ah Bulb: Halogen Weight: 450 g (incl. rechargeable batteries) Dimensions head/D/H: 77 Ø x 70 x 175 mm
TOOL CASES & TOOL SETS
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Tool boxes made of Polypropylen*
HAZMAT tool kit (without picture)
(without content)
article no
H x B x T mm
accessories
9282020S 9282021S 9282022S
170 x 425 x 215 190 x 475 x 240 250 x 475 x 240
9282023S
230 x 540 x 295
9282024S
290 x 540 x 295
9282025S 9282026S
260 x 620 x 310 320 x 620 x 310
dividing wall 6 inserts 6 inserts 2 drawer 7 inserts, dividing walls 2 integrated handle 7 inserts, dividing walls 2 drawers 10 inserts, dividing wall 10 inserts, dividing wall 4 drawers
weight g
weight g
article no
content
7250007S
9100 1 x Wire brush 4-rows 1 x Crate opener 1 x Claw hammer 500 g 1 x Knife, strong pattern 1 x Spatula stiff blade 50 mm 1 x Waterpump plier 300 mm 1 x Longnose plier 180 mm 1 x Combination plier 200 mm 1 x Deck scraper with handle 380 mm 1 x Spray booth scraper 1 x Screwdriver 8 x 150 mm 1 x Cross slot screwdriver PH 3 1 x Tin snip 1 x Adjustable end wrench 200 + 300 mm 1 x Adjustable pipe wrench 385 mm 1 x Universal bung wrench in plastic bucket
1400 1600 2100 2200 2500 3000 3300
Machinist’ tool kit (without picture)
Spray booth cleaning kit (without picture)
article no
content
7250005S
1 x Double open end wrench set 6-32 mm 1 x Adjustable end wrench 250 mm 1 x Adjustable end wrench 300 mm 1 x Combination Plier 200 mm 1 x Waterpump plier 250 mm 1 x Swedish plier 1.1/2" 1 x Diagonal cutting plier 165 mm 1 x Machinist’ hammer 500 g 1 x Machinist’ hammer 1000 g 1 x Flat chisel 200 mm 1 x Flat chisel 300 mm 1 x Screwdriver 4,5 x 100 mm 1 x Screwdriver 8 x 150 mm 1 x Cross slot screwdriver PH 1 1 x Cross slot screwdriver PH 2 1 x Spatula flexible blade 50 mm 1 x Wire brush 4-rows in tool box made of Polypropylen 260 x 620 x 310 mm
138
weight g
14000
article no
content
7250009S
1 x Spatula stiff blade 50+90 mm 1 x Spatula flexible blade 90 mm 1 x Flat scraper 200 mm 1 x Pick scraper 1 x Deck scraper 300 mm 1 x Spray booth scraper 1 x Scraper 100 mm 1 x Wire brush 4-rows in tool box made of Polypropylen 170 x 425 x 215 mm
weight g
4100
*Polypropylen is a material, which is characterized of its small weight and its high resisting power. This material is UV-stable and break-proof and ideal for exposure for aggressive materials e.g. oil binder.
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Marine kit
Fire brigade kit II
(without picture)
(without picture)
article no
content
weight g
article no
content
7250001S
1 x Nail puller 900 mm 66000 1 x Adjustable end wrench 250 mm 1 x Adjustable end wrench 300 mm 1 x Adjustable end wrench 380 mm 1 x Machinist’ hammer 500 g 1 x Machinist’ hammer 1000 g 3 x Scaling hammer 500 g 1 x Sledge hammer 2000 g 3 x Deck scraper 300 mm 3 x Scraper 100 mm 3 x Ship scraper 100 mm 1 x Screwdriver 10 x 200 mm 1 x Screwdriver 10 x 300 mm 2 x Square point shovel with D-handle 1 x Flat chisel 150 mm 1 x Flat chisel 250 mm 1 x Adjustable pipe wrench 300 mm 1 x Adjustable pipe wrench 385 mm in tool box made of wood 1300 x 900 x 280 mm
7250003S
1 x Adjustable end wrench 300 mm 1 x Adjustable pipe wrench 460 mm 1 x Machinist’ hammer 600 g 1 x Flat chisel 200 mm 1 x Waterpump plier 250 mm 1 x Screwdriver 10 x 200 mm 1 x Hatchet 450 mm in tool box made of Polypropylen 260 x 620 x 310 mm
Fire brigade kit I (without picture)
article no
content
weight g
7250002S
1 x Firemens’ axe 915 mm 1 x Hatchet 450 mm 1 x Flat chisel 250 mm 1 x Machinist’ hammer 900 g 1 x Adjustable end wrench 300 mm 1 x Adjustable pipe wrench 460 mm 1 x Waterpump plier 250 mm 1 x Screwdriver 10 x 200 mm 1 x Tin snip 280 mm 1 x Railroad pick 2150 g 1 x Square point shovel with D-handle 1 x Crow bar 800 mm 1 x Sledge hammer 2000 g in tool box made of wood 260 x 620 x 310 mm
37000
weight g
9000
Spray booth kit (without picture)
article no
content
7250004S
1 x Claw hammer 500 g 1 x Scraper 100 mm 1 x Deck scraper 300 mm 1 x Spray booth scraper 1 x Screwdriver 10 x 200 mm 1 x Flat chisel 300 mm in tool box made of Polypropylen 170 x 425 x 215 mm
weight g
5000
139
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Technician’s kit (without picture)
article no
content
7250006S
1 x Combination wrench 12700 10 / 11 / 12 / 13 / 14 / 15 / 17 / 19 / 22 / 24 mm 1 x Double end box wrench 6 x 7 / 8 x 9 / 10 x 11 / 12 x 13 / 14 x 17 / 19 x 22 mm 1 x Hex key set 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / 10 mm 1 x Combination plier 200 mm 1 x Diagonal cutting plier 165 mm 1 x Waterpump plier 250 mm 1 x Swedish plier 1.1/2" 1 x Adjustable end wrench 250 + 300 mm 1 x Machinist’ hammer 500 g 1 x Sledge hammer 1000 g 1 x Screwdriver 6 x 100 / 8 x 150 mm 1 x Cross slot screwdriver PH 1 + PH 3 1 x Flat chisel 200 mm 1 x Cape chisel 6-point 200 mm 1 x Punch 5 x 120 / 10 x 160 mm 1 x Scissors 225 mm 1 x Knife strong pattern 1 x Spatula Stiff blade 50 mm 1 x Wire brush 4-rows in tool box made of Polypropylen 260 x 620 x 310 mm
140
weight g
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Technical information Use of non-sparking tools, their quality characteristics and the correct treatment As well as the basic questions of the spark safety, as the use, the quality characteristics and the treatment of non-sparking tools, the most different and partial mistaken ideas exist. The most important aspects should be stressed in the following, to show also the non-professionals an applicable picture of the potential dangers and their correct abatement. These are only practical advices. The more complicated physical and technological questions can not be answered here. 1. Different mixtures can end in explosions, through sparks, which can occur by beating usual steel tools; including primarily mixtures of air and carbon disulfide, hydrogen, acetylene, ethylene oxide, carbonic oxide and hydrogene sulphide. To work against the availability of such creations the development of flammable sparks has to be avoided in every case. The use of non-sparking tools is a very good measurement for this, but not the only one. It has to be amended through other wise precautions. Non-sparking tools, e.g. ENDRES-safety tools, are made of special alloys based of copper which do not make flammable sparks when beating or rubbing it. The tools are absolute sparkproof in all practical strains. 2. In very unfavourable circumstances also a non-sparking tool can produce indirectly flammable sparks. This is possible, if you are working on rusty steel surfaces . The danger becomes bigger as soon as a painting of aluminium is existent. The separation of spark building parts of metallic or mineral surfaces (e.g. cement) with a non-sparking tool happens the bigger the difference of the hardness between tool and treated material is. The result is that non-sparking tools have to be made of less hard alloys; this demand finds its barrier in the using hardness of the different tool, which says that you can not surrender hardness by chisels; but a hammer, a wrench or a wrecking bar can be made of less hard material.
3. Because you can not switch-off the danger of explosion only by using non-sparking tools, you also have to make other precautions to achieve safety. First of all rusty or with light alloy painted surfaces have to be sprinkled with a little bit of water or oil, if you did not abolished these rusts or paints before. You have to look for good air ventilation in the room. Also the use of a working tent against external influences can also be practicable. Boxes, accessories and pipelines have to be filled with protective gas in every case. You also have to pay attention to nothing falls down which can cause sparks; as a precaution you should sprinkle the floor. Also your working clothes should not have any steel parts, especially no cleats, steel of heel or something like this. To achieve the best safety all these point have to be considered. 4. It is a characteristic of non-sparking tools that the basic materials are more sensitive than those of steel tools. The use have to be more accurately and gentle than usually. If attritions appear it is convenient to check up the tool in time. Also every tool should be used only for that what it is made for. So a chisel should not be used as wrecking bar and a usual wrench should not be used as striking wrench. ENDRES safety tools demand only small precautions by reworking. Regrinding should be made wet to avoid losing the hardness. Non-sparking tools made of copper-beryllium, e.g. spatulas, screwdrivers, pliers, etc. are not allowed to be grinded the same way as usual steel tools. Heating above 250°C should be avoided as the using characteristic will be lost and the tool only has the hardness of copper, which means that it can not be used any more. Because of this these tools should be grinded only wet. The wet grinding prevents the breathing of dust and smokes of copper-beryllium, which could cause sanitary problems. In usual use the tools made of copper-beryllium are not dangerous. An accurate consideration of all these advices advises for every user of non-sparking tools in their own interest because only then the biggest safety can be reached and a long life of the tools can be ensured.
So the guide lines for ENDRES-safety tools producing come to an agreement.
141
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Aftertreatment To rework Endres Safety Tools correctly and with success you have to check first of which metal alloy the tool is made. Tools made of Special-Bronze are yellowish coloured (differences on the surface because of the atmosphere’s influence, chemicals and heatings are possible). Tools made of Copper-Beryllium are more reddish coloured and stamped with "CuBe" on the surface. 1. Endres Tools can be resharpen with forging, welding and with cutting remove. Those aftertreatments should be better done in our company because the tools have to get a hardness test or heat-treatment. a) Forging usually happens between 785°C and 900°C; the best temperature for this is 880°C. These temperature limits have to be noticed exactly. The tools have to dry slowly in the air and not with deterring. b) Welding on or welding for repair happens with the addition of same material. c) Also by cutting remove no special precautionary measurements have to be kept. Therefore you can use the same tools and machines which you use for conventional tools made of steel. Regrind working should happen with very good colding (e.g. water). 2. Endres Tools made of CUBE should be resharpen with a lot of care. The smoke and the dust are toxic and carcinogenic. Also, copper loses its quality if it is heated up with too high temperature and could have only properties of usual copper if it is heated up too much. You have to cool down the material carefully and you should avoid to get a heating over 250°C. If you always keep the material wet when you sharpen it, there will be no danger. If it is possible you always have to wear a dust-mask and gloves and you should avoid contact with skin and eye Another important point is, that CUBE, if it is overheated, can loose its alloying attributes! After this its attributes would be the same like general copper! a) Afterforging of tools made of CUBE can not be recommended, because forging needs to have longtime operating experience in additional softening treatment. Please ask us if forging is realizable in specific case b) By machining, especially by forging, you have to cool down really carefully, and you have to avoid in every case heating over 250°C. The cutting tools have to have a chip angle of approx. 0°, as long as the treatment is done in hardened condition.
142
Important advice for afterforging of Endres tools made of copper-beryllium (CUBE): Beryllium is one of the materials which fall under the ordinance on toxic working materials! This is especially to be related on dusts and smokes which can be produced during melting, grinding and welding. There is no danger, if you do the grinding wet! If this is not possible in some exceptional cases, there are some actions needed: 1. don’t inhale the dust (use a mask) 2. avoid contact with skin and eyes 3. wear protective clothing 4. at dust- and smoke emission, wear an effective gas mask
LONGLIFE GUARANTEE ENDRES TOOLS contain a longlife guarantee against mistakes in material and producing! This guarantee does not include damages caused by an improper handling. We reserve the right to any changes in material, workmanship and design without notice.
ENDRES TOOLS
GmbH
- SAFETY FIRST -
General terms and conditions of sale and delivery 1. General a The following general terms and conditions of sale and delivery apply to all current and future deliverie All other conditions have to be confirmed in written form by u b Telegraphic, telephonic or oral additions, amendments or supplementary agreements will only take effect if they have been confirmed by us in writing. 2. Pricing and payment terms a Prices are valid ex works or from our warehouse excluding auxiliary costs such as freight, duty, packaging and insurance, unless otherwise agreed in writing. The relevant VAT will be added to thi b All offers of prices are without engagement. The prices are valid after confirmation of order for 6 month If the buyer gets default in acceptance we reserve the right to make adaptation regarding our prices because of risen costs of labor and costs of material. c Regarding special designs a more- or less delivery will be reserved up to 15 %. 3. Delivery terms The buyer bears risk and expense of sending the products ex works as well as the expense of potential transport insurance. Risk – even for freight paid delivery – will pass to the buyer from the start of loading the products onto the means of transport. 4. Complaints The buyer is to check the delivered products immediately with thoroughness reasonable for him and – if necessary by sample processing – to test the quality of the delivered products and to instantly reprehend in writing any identifiable defects within 8 (working) days after receipt of the products at the latest. Otherwise the products will be regarded as accepted without reservation. 5. Absorption Is the product to be proved for special conditions, the absorption will be done at the supplier. Factual costs of absorption will be taken by the supplier, all other costs will be taken by the buyer. 6. Return of the products a The return of the products have to be agreed by u The products can be sent back by the market price less 30 % administrative charge b Special designs generally will not be taken back. 7. Part shipments Part shipments at his own expense are allowed. 8. Delivery times a For each order which is placed we confirm the delivery time in due consideration of operating conditions and employment relationships taking place by the time of order.
b The called delivery times are non-binding. Under no circumstances shall you be entitled to claim costs, expenses, damages or compensation in the event of delay. c Unpredictable events beyond our control, such as forces of nature, war, war threat, revolt, use of force by third parties against people or things, sovereign interventions including currency and trade measures, strikes at the company or at our suppliers or our transport companies place of business, disruptions in the intended transport links, fire, raw material deficiencies, energy deficiencies and any other disruptions at our place of business through no fault of us or our suppliers prolong firmly agreed terms and dates of delivery by the length of the disruption. This also applies if there is already a delay in delivery or if the above-mentioned performance hindrances already exist at the conclusion of the agreement but are not known to u We will instantly inform the buyer of hindrances of the above-mentioned type. 9. Payment condition a If there is no other agreement the term of payment is 30 days net from the date of the invoice. b By delayed payments we observe the right to charge default interest of the account current rate. 10. Reservation of title All delivered products will remain our property until complete payment is received (goods subject to reservation of title). In the case of delivery subject to reservation of title, the buyer already surrenders his right of claims regarding third parties to us as payment, insofar as these result from the sale or processing of our products, until final payment of all due charges is received. The cession is to be made apparent to the customer in our records, especially in the open item list and on the delivery notes, invoices etc. If the buyer defaults on payment to us, sales revenue received by him is to be separated out and the buyer will only hold these in our name. Possible claims against insurers are hereby already surrendered to us within the limits of the Insurance Contract Law. Claims against us may not be surrendered without our express consent. 11. Place of performance, jurisdiction and applicable law a Our place of business is the place of performance. German law applie All rights out of the agreement are non-negotiable. b For decisions relating to all disagreements resulting from this agreement, the factually responsible jurisdiction at our place of business will be exclusively regionally responsible. NOTE: This is a translation only. The German version of these terms and conditions shall prevail!
143
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Index A .........................................................................................Seite Adjustable combination plier.............................................................77 Adjustable hook wrench....................................................................34 Adjustable pipe wrench.....................................................................76 Adjustable wrench .............................................................................76 Axe ...................................................................................................108 B Ball ended screw driver ....................................................................70 Ball pein hammer..............................................................................86 Bar for claw spanner .........................................................................41 Bar for double ended socket wrench 6-point...................................39 Bar for socket wrench 6-point...........................................................38 Barrel hook ......................................................................................117 Bending bar .....................................................................................117 Bolt cutter ..........................................................................................80 Box wrench for extension..................................................................27 Box wrench for extension Inch..........................................................27 Brick towel.......................................................................................101 Bricklayer s hammer ..........................................................................87 Bricklayer s hammer american type..................................................87 Bricklayers chisel, 6-point..................................................................91 Broom, round wire...........................................................................105 Brush end, wire curled ....................................................................105 Brush, spark-plug cleaning, round wire ..........................................104 Brush, tin bronze wire, curled .........................................................104 Brush, tube, wire curled..................................................................105 Bucket ..............................................................................................121 Bung wrench......................................................................................37 Bung wrench, universal.....................................................................37 B-valve wheel wrench.......................................................................35 C Cape chisel, 6-point...........................................................................91 Cape chisel, oval form .......................................................................91 Carbide drum opener.......................................................................117 Caulking tool......................................................................................98 Center punch......................................................................................94 Chain hoist .......................................................................................127 Chain pipe wrench heavy duty..........................................................77 Chain pipe wrench light pattern........................................................77 Circlip plier for external rings............................................................80 Circlip plier for internal rings.............................................................80 Clamp ...............................................................................................121 Claw hammer.....................................................................................87 Claw spanner without bar .................................................................41 Clubhammer.......................................................................................86 Combination plier ..............................................................................77 Combination plier isolated.................................................................77 Combination wrench ..........................................................................15 Combination Wrench extra long ........................................................17 Combination wrench Inch ..................................................................16 Combination wrench offset ...............................................................17 Concrete chisel...................................................................................92 Construction box wrench offset.........................................................31 Construction box wrench offset Inch.................................................31 Construction wrench with pin............................................................29 Construction wrench with pin Inch....................................................29
144
...........................................................................................Seite Construction wrench with pin offset .................................................30 Construction wrench with pin offset Inch .........................................30 Convert coupler 1/4" to 1/2" ...........................................................45 Convert coupler 1/2" to 3/4" ...........................................................48 Convert coupler 3/4" to 1" ...............................................................54 Coupler 1/4"......................................................................................45 Coupler 1/2" ......................................................................................48 Coupler 3/4"......................................................................................54 Coupler 1" ..........................................................................................58 Crate opener ....................................................................................117 Crimping plier ....................................................................................80 Cross pein hammer............................................................................86 Cross slot screw driver.......................................................................68 Cross slot screw driver socket 1/2" ..................................................51 Crow foot spanner 1/2" ....................................................................42 Crowbar............................................................................................116 Cup brush, tin bronze wire, curled ..................................................104 Cutoff hammer...................................................................................88 Cutting shear......................................................................................81 D Deck scraper ..................................................................................... 99 Deck scraper ....................................................................................102 Deck scraper with handle..................................................................99 Deep tension clamp.........................................................................121 Diagonal cutting plier ........................................................................78 Diagonal cutting plier heavy duty.....................................................78 Diagonal cutting plier heavy duty isolated.......................................78 Double end box wrench offset..........................................................18 Double end box wrench offset Inch..................................................19 Double end box wrench straight .......................................................20 Double end box wrench straight Inch ...............................................20 Double end scriber ............................................................................93 Double ended socket wrench 6-point...............................................39 Double face machinist hammer.........................................................87 Double open end wrench ..................................................................10 Double open end wrench Inch ..........................................................11 Double open end wrench small ........................................................12 Draw knife .......................................................................................126 Driftpin, barrel type...........................................................................94 Drill bit.............................................................................................126 Drill bit set.......................................................................................126 Dust pan...........................................................................................110 E Edging spade ...................................................................................110 Electrician s screw driver ...................................................................68 Extension bar 1/4" ............................................................................44 Extension bar 1/2" ............................................................................48 Extension bar 3/4" ............................................................................54 Extension bar 1" ................................................................................58 Extensions ..........................................................................................28 Extreme powerdrives .........................................................................89
ENDRES TOOLS
GmbH
- SAFETY FIRST -
F .........................................................................................Seite Face spanner......................................................................................35 Fire Brigade Kit I..............................................................................139 Fire Brigade Kit II.............................................................................139 Firemens axe ....................................................................................108 Firemens hatchet made of CUBE with fiberglass handle ................108 Firemens hook..................................................................................109 Flange spreader ...............................................................................126 Flange wedge ..................................................................................114 Flat chisel, oval form .........................................................................91 Flat Double Open End Wrench...........................................................12 Flat Double Open End Wrench Inch...................................................12 Flat file.............................................................................................122 Flat nose plier....................................................................................79 Flat scraper ........................................................................................99 Folding spade ..................................................................................110 Fork for guncotton ...........................................................................112 G Garden fork......................................................................................111 Gas pipe plier ....................................................................................77 Gasket knife, round .........................................................................115 Gasket knife, straight ......................................................................115 H Hack saw blade ...............................................................................120 Hack saw frame...............................................................................120 Halfround file...................................................................................122 Hammer with fiberglass handle........................................................84 Hammer with hickory handle............................................................84 Hand guard for chisel, grooved.........................................................92 Hand pick.........................................................................................109 Hand saw .........................................................................................120 Hand saw, heavy duty .....................................................................120 Hand style scraper...........................................................................100 Handbroom, tin bronze wire, curled ...............................................105 Handbrush, tin bronze wire, curled.................................................105 Hatchet.............................................................................................108 Hay fork ...........................................................................................111 HAZMAT tool kit ...............................................................................138 Hearing needle ................................................................................125 Hearing needle with ball end .........................................................125 Hedge shears ...................................................................................111 Hex key..............................................................................................72 Hex key Inch......................................................................................72 Hex key long pattern.........................................................................72 Hex key screw driver.........................................................................70 Hex key screw driver 90° angled......................................................70 Hex key with ball end .......................................................................73 Hex key with ball end and t-handle .................................................74 Hex key with ball end long pattern..................................................73 Hex key with t-handle.......................................................................73 Hex key with t-handle long pattern..................................................73 Hinged handle 1/4" ..........................................................................44 Hinged handle 1/2" ..........................................................................48 Hinged handle 3/4" ..........................................................................54 Hinged handle 1" ..............................................................................58 Hinged handle with t-handle 1/2" ...................................................49
...........................................................................................Seite Hinged handle with t-handle 3/4" ...................................................55 Hinged handle with t-handle 1" .......................................................59 Hoe...................................................................................................108 Hook wrench......................................................................................34 Hose coupling wrench A-B-C .............................................................34 Hose coupling wrench B-C.................................................................34 Hydraulic palett truck ......................................................................127 I Impact convert coupler 1/2" to 3/4" ...............................................61 Impact convert coupler 3/4" to 1" ...................................................63 Impact convert coupler 1" to 1.1/2" ................................................65 Impact extension bar 1/2"................................................................61 Impact extension bar 3/4"................................................................63 Impact extension bar 1"....................................................................64 Impact reducer 1/2" to 1/4" ............................................................61 Impact reducer 3/4" to 1/2" ............................................................63 Impact reducer 1" to 3/4" ................................................................65 Impact reducer 1.1/2" to 1" .............................................................66 Impact safety pin 1/2"......................................................................61 Impact safety pin 3/4"......................................................................63 Impact safety pin 1"..........................................................................65 Impact safety pin 1.1/2"...................................................................65 Impact safety pin 2.1/2"...................................................................65 Impact safety ring 3/4" ....................................................................63 Impact safety ring 1".........................................................................65 Impact snap ring 1/2".......................................................................61 Impact snap ring 3/4".......................................................................63 Impact snap ring 1"...........................................................................65 Impact snap ring 1.1/2"....................................................................66 Impact snap ring 2.1/2"....................................................................66 Impact socket 6-point 1"...................................................................64 Impact socket 6-point 1" long pattern..............................................64 Impact socket 6-point 1.1/2"............................................................66 Impact socket 6-point 1.1/2" long pattern ......................................66 Impact socket 6-point 1/2"...............................................................60 Impact socket 6-point 1/2" long pattern .........................................60 Impact socket 6-point 3/4"...............................................................62 Impact socket 6-point 3/4" long pattern .........................................62 Impact socket with hexagon bit 1"...................................................64 Impact socket with hexagon bit 1/2"...............................................60 Impact socket with hexagon bit 3/4"...............................................62 Impact universal joint 1"...................................................................65 Impact universal joint 1/2"...............................................................61 Impact universal joint 3/4"...............................................................63 J Joint towel .......................................................................................101 K Knife...................................................................................................98 Knife, strong pattern..........................................................................98
145
ENDRES TOOLS
GmbH
- SAFETY FIRST -
L .........................................................................................Seite Long handle open end wrench .........................................................26 Long handle open end wrench Inch .................................................26 Long nose plier with cutter ...............................................................79 Long nose plier with cutter and 45° angled top..............................79 Long nose plier with cutter isolated .................................................79 M Machinist hammer with fiberglass handle ........................................84 Machinist hammer with hickory handle ............................................84 Machinist tool kit .............................................................................138 Mallet.................................................................................................88 Manhole-hook....................................................................................37 Manhole-hook, strong pattern ..........................................................37 Manual portable oil pump...............................................................126 Manure fork .....................................................................................111 Marine Kit ........................................................................................139 Minehammer with fiberglass handle ................................................85 Minehammer with hickory handle ....................................................85 Miners pick .......................................................................................109 Monkey wrench .................................................................................76 Multipurpose snip ..............................................................................81 N Nail puller ........................................................................................115 Needle .............................................................................................125 Nosekey ...........................................................................................114 O Offset handle 1" ................................................................................59 Offset handle 1/2" ............................................................................49 Offset handle 3/4" ............................................................................55 Offset pin ...........................................................................................93 Offset screw driver ............................................................................74 P Parallel vice .....................................................................................121 Pick ..................................................................................................109 Pick scraper......................................................................................102 Pin Punch ...........................................................................................94 Pin punch set.....................................................................................95 Pin punch, heavy duty.......................................................................95 Pin wrench 6-point ............................................................................41 Pin wrench 6-point Inch ....................................................................41 Pin, straight........................................................................................95 Pincer .................................................................................................79 Pincer heavy duty..............................................................................79 Pinch bar..........................................................................................115 Pinch bar with edge and ball..........................................................116 Pinch bar with point and ball..........................................................116 Pinch bar with point and claw ........................................................116 Pinch bar with point and edge .......................................................116 Pin-Set................................................................................................94 Pipe cutter .......................................................................................121 Plasters towel...................................................................................101 Pocket-caliper made of brass ..........................................................122 Pocket-caliper made of plastic ........................................................122 Point chisel, 6-point ..........................................................................91
146
...........................................................................................Seite Pointed towel ..................................................................................101 Powerdrive dead blow.......................................................................89 Powerdrive dead blow with compact synthetic tops........................89 Puch, heavy duty...............................................................................93 Punch .................................................................................................93 Punch hammer ..................................................................................88 Punch, machinist extra strong............................................................94 R Railroad pick ....................................................................................109 Rake .................................................................................................111 Ratchet 1/4"......................................................................................44 Ratchet 1/2" ......................................................................................47 Ratchet 3/4"......................................................................................53 Ratchet 1" ..........................................................................................57 Ratchet with square coupler 1/4".....................................................44 Ratchet with square coupler 1/2".....................................................47 Ratchet with square coupler 3/4".....................................................53 Ratchet with square coupler 1".........................................................57 Ratchet wrench 12-point ...................................................................42 Ratchet wrench 6-point .....................................................................42 Reaping hook...................................................................................112 Reducer 1" .........................................................................................58 Reducer 1/2" to 1/4"........................................................................48 Reducer 3/4" to 1/2"........................................................................54 Riveter................................................................................................86 Round file ........................................................................................122 Round nose plier ...............................................................................78 Round point shovel..........................................................................110 Rubber mallet ....................................................................................88 Rubber pusher made of wood with handle....................................105 Rust scraper .....................................................................................100 S Scaling hammer.................................................................................87 Scoop shovel....................................................................................110 Scraper .............................................................................................100 Scraper, concave ..............................................................................100 Scraper, flexible blade .......................................................................99 Scraper, floor....................................................................................102 Scraper, wide, stiff blade.................................................................101 Screw driver.......................................................................................68 Screw driver bit, 6-point .................................................................124 Screw driver bit, PH.........................................................................124 Screw driver bit, Profile...................................................................124 Screw driver bit, slot .......................................................................124 Screw driver socket sets 1/2"...........................................................52 Screw driver socket with hexagon bit...............................................56 Screw driver socket with hexagon bit 1/2"......................................51 Screw driver socket with hexagon bit 1/2" long pattern ................51 Screwdriver socket 1/2"....................................................................51 Scrubbing broom, round wire..........................................................104 Securing for hammers .....................................................................124 Set of box wrenches for extension ...................................................28 Set of combination wrenches............................................................15 Set of combination wrenches extra long ..........................................17 Set of combination wrenches Inch ....................................................16
ENDRES TOOLS
GmbH
- SAFETY FIRST -
...........................................................................................Seite Set of combination wrenches offset .................................................17 Set of double end box wrench offset ...............................................18 Set of double end box wrench offset, Inch ......................................19 Set of double open end wrenches ....................................................10 Set of double open end wrenches Inch ............................................11 Set of double open end wrenches small ..........................................12 Set of pliers .......................................................................................80 Sets of hex keys ................................................................................71 Sets of screw drivers .........................................................................69 Setting punch ................................................................................... 95 Shackle.............................................................................................124 Ship scraper .....................................................................................100 Single box wrench .............................................................................21 Single box wrench Inch .....................................................................21 Single open end wrench....................................................................13 Single open end wrench Inch............................................................14 Sledge hammer with fiberglass handle ............................................85 Sledge hammer with hickory handle................................................85 Sliding t-handle 3/4".........................................................................54 Sliding t-handle 1".............................................................................58 Sliding T-wrench 1/2"........................................................................49 Sliding t-wrench 3/4"........................................................................55 Socket 6-point 1"...............................................................................57 Socket 6-point 1/2"...........................................................................46 Socket 6-point 1/2" Inch...................................................................46 Socket 6-point 1/4" ..........................................................................44 Socket 6-point 3/4" ..........................................................................53 Socket 6-point Inch 1".......................................................................57 Socket 6-point long pattern 1/2" .....................................................47 Socket set 1/4" .................................................................................45 Socket set 1/2" .................................................................................50 Socket sets 3/4"................................................................................56 Socket sets 1" ....................................................................................59 Socket wrench L-type 6-point............................................................39 Socket wrench, 6-point......................................................................38 Socket wrench, 6-point with t-handle...............................................40 Space-wedge ...................................................................................114 Spatula.............................................................................................. 99 Spatula, flexible blade.......................................................................98 Spatula, stiff blade ............................................................................98 Special bung wrench .........................................................................37 Special extension for crowfoot spanner 1/2"...................................42 Speed handle 1/2"............................................................................49 Speed handle 3/4"............................................................................55 Speed handle 1"................................................................................59 SPI Holder non rebound ....................................................................89 Splitting chisel, flat............................................................................92 Spray booth cleaning kit..................................................................138 Spray booth Kit ................................................................................139 Spray booth scraper...........................................................................99 SPS Holder non-sparking ...................................................................89 Square blade awl...............................................................................93 Square key .........................................................................................74 Square point handle 1/4" .................................................................45 Square point shovel.........................................................................110 Square point socket L-type ................................................................36 Stone wedge....................................................................................114
...........................................................................................Seite Striking box wrench...........................................................................24 Striking box wrench Inch ...................................................................25 Striking box wrench offset ................................................................25 Striking open end wrench .................................................................22 Striking open end wrench Inch .........................................................23 Swedish plier .....................................................................................76 Swedish plier with mole 90° angled ................................................76 T Taper punch .......................................................................................95 Technician s Kit.................................................................................140 Tension-clamp ..................................................................................121 T-handle 1/4" ....................................................................................44 T-handle 1/2" ....................................................................................48 Thread-cleaning pin ...........................................................................95 Tin snip ..............................................................................................81 Tin snip heavy duty ...........................................................................81 Tool case made of Polypropylen .....................................................138 Torque wrench 1/2" ..........................................................................49 Torx-screw driver ...............................................................................70 Triangle socket 1/2"..........................................................................36 Triangle tube socket ..........................................................................36 Triangular scraper ............................................................................100 Tweezer, flat nose............................................................................125 Tweezer, made of plastic.................................................................125 Tweezer, neat...................................................................................125 Tyre levers........................................................................................117 Tyre levers, heavy duty offset.........................................................117 U Universal joint 1/4"...........................................................................45 Universal joint 1/2"...........................................................................49 Universal joint 3/4"...........................................................................55 Universal joint 1"...............................................................................58 V Valve wheel hook..............................................................................35 Valve wheel hook..............................................................................35 Valve wheel wrench ..........................................................................35 W Waterpump plier ................................................................................78 Waterpump plier with box joint ........................................................78 Wedge with hole .............................................................................114 Wheel brush, tin bronze wire, curled..............................................104 Wire brush, tin bronze wire, curled.................................................104 Wire stripping plier ............................................................................80 Wooden mallet ..................................................................................88 Wrecking bar....................................................................................115 Wrench for valve of tanktruck...........................................................35
147
ENDRES TOOLS - SAFETY FIRST -
Notes
148
GmbH
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Notes
149
ENDRES TOOLS - SAFETY FIRST -
Notes
150
GmbH
ENDRES TOOLS - SAFETY FIRST -
ENDRES TOOLS
GmbH
- SAFETY FIRST -
Am Eichholz 12 · D-42897 Remscheid phone +49 (0) 21 91/36 23-0 fax +49 (0) 21 91/34 00-20 Email: info@endres-tools.de www.endres-tools.de
NON-SPARKING TOOLS
GmbH