Shepherd Feed Passage Coating leaflet

GSAH Feed Passage Coating

Coating Systems

New Product from G Shepherd Animal Health

Please pass me on ‘thank you’

1 - Pressure wash area then deep acid cleanse

2 - Dry thoroughly with blow torch

4 - Mark outline of area required with tape

4 - Mix parts A, B and C

5 - Use paddle provided on a quality electric drill

6 - Pour mixed coatings onto dry concrete

7 - Squeegee evenly

8 - Use spiked roller to aerate coating

9 - Allow to dry for 24 hrs

It’s like giving your dairy cows a plate to eat from!

GSAH FEED PASSAGE COATING is an epoxy-resin, applied over concrete in the feed passage or trough • Improves intakes • Makes it more comfortable for the cows to eat

•

Very easy to clean. The surface can be power washed as often as you like. But in practice, there’s little requirement for washing, as the cows will do it for you! (see our farmer testimonial)

• Does not harbour bacteria

• Especially useful where feed passage concrete is worn and uneven

• Feed areas stay cleaner, as cows are happy to lick food residues from the floor

• Smooth surface makes it easier to push feed up to the barrier, if necessary

• Cleaner feed = less wastage • A clean eating surface is less likely to contain debris, like rough concrete

• Fast-drying – machinery can run over the surface within 24 hours of application (times may vary, depending on ambient temperature)

• Resistant to harsh chemicals

• Only one coat required – suitable for zero grazing units

• Does not corrode like concrete and is up to four times stronger

• Recognised by industrial engineering and manufacturing industries for its high quality

• Extremely hard-wearing and can withstand heavy traffic

• Very smart in appearance and comes in a range of colours (colour runs through coating, so effect will not wear off)

• Can also be used to line troughs

Order online at www.gshepherd.co.uk

Free Delivery (subject to T&Cs)

John & Graham Robson, Roe Farm, Catterall, Lancashire Dairy herd: 180 Holstein Friesians averaging 10,000kgs Graham describes GSAH Feed Passage Coating as “as hard as nails.” He says the surface has remained undamaged, despite driving over it daily with a feeder wagon.

“I like to provide my cows with the best possible environment, in order to maximise yields. Making the surface more comfortable and cleaner for them to eat from was part of that process.

“There is no real need to power wash it, as the cows lick it clean themselves. I like GSAH Feed Passage Coating and it will definitely be part of any new building that is put up on the farm; it has done a good job.”

About GSAH Feed Passage Coating Nutritionist Viewpoint - Paul Finlay

Background

Encouraging DMIs and keeping feeding areas clean are two important factors, when it comes to maximising cow performance, according to national cattle nutrition expert, Paul Findley of Best Fed Nutrition. He believes that GSAH Feed Passage Flooring is a significant development in dairy cow management, because it is more hygienic than concrete and keeps the feeding area free of greasy food residues.

The epoxy resin ingredient combination of GSAH Feed Passage Coating has been around since the mid-1990s. It was originally developed for the civil engineering industry, where a tough surface was needed, to cope with harsh chemicals. More recently, it has been applied to garage floors used by motor sport enthusiasts, where a level floor resistant to corrosive materials is required. Also used in hospitals, to improve hygiene.

“It’s difficult to put a figure on increased DMIs, but cows will eat up better on a clean, smooth surface, compared with concrete flooring,” says Paul. “Any measure which can help to encourage them to eat is bound to enhance milk yields and I will be advising my clients to consider having it installed.”

Application rates (may vary, depending on condition of underlying concrete) Rough floor – 4.0kgs/square metre New floor – 2.5kgs/square metre Self-levelling, so no need to smooth it off Recommendation application width – 1.2-1.5 metre band Straightforward to apply, but we recommend using our own professionals, for best results

Application Process: Pressure wash, acid clean, dry, mix, apply, squeegee, roller and allow to dry for 24 hours before use

G Shepherd Animal Health Order Hotline: 01772 690131

How to buy: On-line shop: Easy to use website… pay by card, cheque or BACS On-line enquiry service: Ask for advice, we’ll get back to you Over the phone: Call 01772 690131 for advice and to order

More information & products available at www.gshepherd.co.uk G shepherd Animal Health - a division of SHEPHERD AGRI

Free Delivery

T&C’s apply

G Shepherd Animal Health,Wrainhow Business Centre, Lewth Lane, Woodplumpton, Preston, PR4 OTD t: 01772 690131 e: office@gshepherd.co.uk www.gshepherd.co.uk Due to our policy of improvement where possible, details and prices in this catalogue are subject to change at any time. Errors and omissions excepted.