HPAC October 2015

HEATING SYSTEM SIZING

CROSS CONNECTION CRUSADERS

BATHROOM SHOWCASE

OCTOBER 2015

SUPERMARKET SHIFT TO ALL THINGS “NATURAL” EXTENDS TO REFRIGERANTS

PREVENTIVE MAINTENANCE:

THE KEY TO

SYSTEM

LONGEVITY IAQ: IN A FIELD OF ITS OWN

INTERNET OF THINGS GOES MAINSTREAM PM 40065710

Vitocrossal 300, CU3A 8 reasons it’s perfect for you A compact, floor standing stainless steel condensing boiler for retrofits and cast-iron boiler replacements in residential and small commercial applications.

Extremely quiet operation and 95% AFUE efficiency.

High water volume extends burner run time and reduces cycling.

High temperature operation up to 90°C (194°F).

Fast and easy installation and service with Lambda Pro intelligent combustion management system.

MatriX dome burner for natural gas or propane (NG or LP).

Durable, reliable and long service life with Inox- Crossal stainless steel heat exchanger and high mass design.

No dedicated boiler pump or low loss header required.

Enter now for a chance to WIN an Alaskan Cruise! http://goo.gl/COJ1v5

OCTOBER 2015

VOL. 89 NO. 6

TENTS

26 PLUMBING

MYTHS & MISCONCEPTIONS

Understanding the true nature of outbreaks associated with potable water systems.

By Tim Keane

18

30

HEATING

DÉJÀ VU, ALL OVER AGAIN A step-by-step guide to preventive maintenance.

BY IAN MCTEER

BATHROOM SHOWCASE

QUALITY, CLEAN & TIMELESS Innovation is the hallmark of today’s bathrooms.

BY BETH MCKAY

22 SOFTWARE

HOW TO BETTER MANAGE PAYMENT DATA

A look at the widening scope of online payment services provided by financial institutions.

By Jacob Stoller

34 HYDRONICS

TUBING DEPTH MATTERS!

It is time to find better ways of ensuring that tubing and reinforcing mesh end up near the mid-height of the slab.

By John Siegenthaler

24 PHILANTHROPY

PLUMBER SHARES HIS GOOD FORTUNE

Hospital redevelopment gets $25-million shot in the arm from HVAC entrepreneur.

MEETING WRAP UPS P44 HRAI AGM P46 CLEANER HEAT SYMPOSIUM P48 CIPH ABC

P49 MODERN HYDRONICSSUMMIT 2015

continued on p4 HPACMAG.COM

OCTOBER 2015 | HPAC

3

OCTOBER 2015

TENTS 76

CONNECTING FOR THE INTERNET OF THINGS BUILDING PREMIERES IN TORONTO

By Beth McKay

HPAC MAGAZINE 80 Valleybrook Drive, Toronto, ON M3B 2S9 TEL: 416.442.5600 FAX: 416.510.5140 www.hpacmag.com EDITOR Kerry Turner (416) 510-5218 KTurner@hpacmag.com ASSISTANT EDITOR Beth McKay (416) 510-5215 BMckay@hpacmag.com SALES & MARKETING Kim Rossiter (416) 510-6794 COORDINATOR KRossiter@hpacmag.com ASSOCIATE David Skene (416) 510-6884 PUBLISHER DSkene@hpacmag.com ACCOUNT Stephen Kranabetter (416) 510-6791 MANAGER skranabetter@hpacmag.com ART DIRECTOR Mark Ryan (416) 442-5600, ext. 3541 MRyan@annexnewcom.ca

NDERSTANDING AND MEASURING U ENERGY TRANSFER

ACCOUNT COORDINATOR Cheryl Fisher (416) 510-5194 CFisher@annexnewcom.ca CIRCULATION MANAGER Anita Madden (416) 442-5600 AMadden@annexnewcom.ca PUBLISHER Peter Leonard (416) 510-6847 PLeonard@hpacmag.com

I t is crucial to calculate the load when designing a heating system.

By Gilles Legault

ANNEX PUBLISHING & PRINTING INC. VICE PRESIDENT Tim Dimopoulos (416) 510-5100 tdimopoulos@annexweb.com

42 SYSTEM SIZING

59

78 CROSS CONNECTION BAD AND UGLY PHOTO CONTEST WRAP UP

RENEWABLES

NET ZERO HOME SHOWCASES TECHNOLOGIES AT THE COMMUNITY LEVEL

DEPARTMENTS 6 Upfront 8 NEWS FEATURE

68 REFRIGERATION

WHAT IS GOING ON IN THE WORLD OF SUPERMARKET REFRIGERATION?

BY DAVE DEMMA

Canada brought its A-team to WorldSkills São Paulo 2015.

By Beth McKay

9 Industry News 52 Mechanical Supply News 57 People 76 Training 75 Calendar 77 The Source

72 PRODUCTS

INDOOR AIR QUALITY

IN A FIELD OF ITS OWN Standard practice for evaluating residential indoor air quality concerns. By Robert Bean

40 HYDRONIC 60 PLUMBING 62 HVAC/R

PRESIDENT & CEO Mike Fredericks mfredericks@annexweb.com PUBLICATIONS MAIL AGREEMENT NO. 40065710, REGISTRATION NO. 10815 Heating Plumbing Air Conditioning (established 1925) is published 7 times per year

by Annex Publishing & Printing Inc. HPAC Magazine is the leading Canadian business publication for the owner/manager of mechanical contracting businesses and their supply partners.

ISSN: 0017-9418 Contents Copyright © 2015 by Annex Publishing & Printing Inc. may not be reprinted without permission.

SUBSCRIBER SERVICES: To subscribe, renew your subscription or to change your address or information please visit us at www.hpacmag.com.

Subscription Price per year: $40.00 CDN; Outside Canada per year: $80.00 US; Single copy Canada: $5.00 CDN. Heating Plumbing Air Conditioning is published 7 times per year except for occasional combined, expanded or premium issues, which count as two subscription issues.

MAIL PREFERENCES: From time to time we make our subscription list available to select companies and organizations whose product or service may interest you. If you do not wish your contact information to be made available, please contact us via one of the following methods: Tel: 800.387.0273, Fax: 416.442.2191; E-mail: vmoore@ annexnewcom.ca; or by mail: Privacy Office, 80 Valleybrook Dr., Toronto, ON M3B 2S9.

HPAC Magazine receives unsolicited materials (including letters to the editor, press releases, promotional items and images) from time to time. HPAC Magazine, its affiliates and assignees may use, reproduce, publish, re-publish, distribute, store and archive such unsolicited submissions in whole or in part in any form or medium whatsoever, without compensation of any sort.

NOTICE: HPAC Magazine, Annex Publishing & Printing Inc., their staff, officers, directors and shareholders (hence known as the “Publisher”) assume no liability, obligations, or responsibility for claims arising from advertised products. The Publisher also reserves the right to limit liability for editorial errors, omissions and oversights to a printed correction in a subsequent issue. HPAC Magazine’s editorial is written for management level mechanical industry personnel who have documented training in the mechanical fields in which they work. Manufacturers’ printed instructions, datasheets and notices always take precedence to published editorial statements.

We acknowledge the financial support of the Government of Canada through the Canada Periodical Fund of the Department of Canadian Heritage.

Proud member of:

4

HPAC | OCTOBER 2015

HPACMAG.COM

VOL. XX NO. XX

WE HAVE ALL YOUR BASES COVERED

Join the big leagues.

Napoleon Heating & Cooling products are built with the highest quality components for quiet, reliable operation in the harshest environments, and our Vortex Turbulator Heat Exchanger ensures maximum efficiency is achieved. Offering your customers a complete, stylish product line guarantees you a homerun every time. With Napoleon, you won’t be throwing any curve balls, just straight performance with higher margins.

TM

Gas Furnaces | Hybrid Furnaces | Wood Furnaces | Central Air Conditioners | Central Heat Pumps Ductless Packaged Units | Condo Pack | Air Handlers | Indoor Air Quality Napoleon Vortex Turbulator

TM

napoleonheatingandcooling.com

< UPFRONT THE NOOSE TIGHTENS ON THE HVAC/R LABOUR MARKET In May 2013, a report from the C.D. Howe Institute identified outdated provincial regulations as needlessly limiting the number of apprenticeship opportunities available to trades workers. Robbie Brydon and Benjamin Dachis, authors of “Access Denied: The Effect of Apprenticeship Restrictions in Skilled Trades,” 1 said that reforming those tight regulations was crucial to meeting demand for skilled workers.

Brydon and Dachis recommended that instead of regulating the rate of apprentice entry, governments should focus on regulating quality of work and safety standards.

More recently, the Heating, Refrigeration and Air Conditioning Institute of Canada (HRAI), together with the HVACR Workforce Development Foundation in the U.S., released three labour market reports.2 The report findings reveal that despite an increase in programs available and a rise in enrollment, there is still a forecasted skills shortage across Canada. This is attributed to fewer professionals entering the industry than will be required to fill the positions being vacated by baby boomers.

BuildForce Canada’s Labour Market Information (LMI) system forecasts that the greatest increase in skills shortages will be seen between 2017 and 2024.

6

HPAC | OCTOBER 2015

HRAI contends that with the exception of HVAC/R technicians and air conditioning and refrigeration mechanics, most other HVAC related occupations, such as gas fitters, plumbers and pipe fitters, have mobility between different industries within the construction sector. This means that several industries will be hiring from the same relatively small labour pool.

This competition within the construction sector can negatively impact the HVAC/R industry in areas where skilled labour shortages are greatest. HRAI notes that provincial regulations and certification requirements can also become a negative factor as they often differ from one province to another, as well as between the U.S. and Canada.

The issues surrounding labour shortages in the mechanical industry are clear. It is the solution that appears to be elusive.

Check out the reports and let us know what you think!

Editor 1

https://www.cdhowe.org/pdf/Commentary_380.pdf

2

www.careersinhvacr.org/site/306Labor-Analysis-Reports

HPACMAG.COM

NEWS FEATURE

SEE THE LATEST HPAC E-NEWSLETTER @ HPACMAG.COM

Canada brought its A-Team to WorldSkills São Paulo 2015

Marc-Antoine Bettez surrounded by his coach, Stephane Robert (l) and his Skills Canada technical expert, Didier Gaudron.

8

HPAC | OCTOBER 2015

Ken Howe competes in the Plumbing and Heating contest area of WorldSkills 2015 in Sao Paulo, Brazil.

Photo WorldSkills

Skills/Compétences Canada, a national not-for-profit organization, recently announced that Team Canada was presented with two silver and three bronze medals at the WorldSkills São Paulo 2015 competition. The team of 29 young skills champions also received 10 medallions for excellence at the event in August.

“Team Canada’s performance was better than the last couple of years but obviously we want to keep improving,” said Shaun Thorson, CEO SkillsCanada. Thorson explained that it is a long process for competitors to get to this level of excellence. He says that participants are selected from the nationals competitions, and undergo a rigorous training program. After training alongside experts, competitors participate in the WorldSkills Canadian trial, which is a benchmark performance. If they succeed at this checkpoint, they are officially part of the team.

In an interview with HPAC following the competition, Ken Howe explained that he takes great pride in his trade, plumbing, and enjoys that he can express his perfectionist nature through his work. He walked away from São Paulo with a medal of excellence in the plumbing and heating category and describes the event as life changing.

“I gave it my all at the competition and I’m very satisfied with how it worked out,” he said. “This trade forces you to set goals and follow through with them, and just because I reached this level doesn’t mean my goal setting has stopped.”

Howe owns his own heating and plumbing company and says he is already putting the skills he learned to use.

Marc-Antoine Bettez won the bronze medal in the refrigeration and air conditioning category. “Even if you are told that it [WorldSkills competition] will be big, you only realize it once you are there. It’s really, I mean, BIG! I had to learn to manage my stress and stay focussed,” he said.

Bettez explained that this is the most prestigious trades and technologies competition in the world, and this year 1189 young people from 59 countries and regions participated. Bettez told HPAC that he has realized that this competition is a great career springboard and that the intensive training he was involved in prior to the competition has increased his enthusiasm and reinforced working safely.

Bettez has been an employee of Nordic Refrigeration since November 2014.

Photo Marc-Antoine Bettez

By Beth McKay

“The dedication, training and skills that these talented young individuals have demonstrated is truly remarkable and will help them forward as they pursue careers in Canada’s skilled trade and technology workforce,” said Thorson.

WorldSkills is the largest international competition of its kind. This event takes place every two years and competitors are chosen from WorldSkills’ Member countries and regions. Competitors must be under 23 years of age to participate.

The 22nd Skills Canada National Competition will be held June 5 to 8, 2016, in Moncton NB. www.skillscompetencescanada.com www.worldskills.org Editor’s Note: HPAC Magazine also spoke with Ken Howe from Monarch, AB and Marc-Antoine Bettez of Hérbertville, QC prior to the competition. That interview is featured in HPAC May at www.hpacmag.com.

HPACMAG.COM

INDUSTRY NEWS

SEE THE LATEST HPAC E-NEWSLETTER @ HPACMAG.COM

NEW YORK CITY ADOPTS ASHRAE’S LEGIONELLA STANDARD New York City council is now embracing legislation that adheres to part of ASHRAE’s newly published Legionella standard. This change in legislation follows 120 cases of infection due to Legionellosis and 12 confirmed deaths from the infection. At press time, New York had declared the outbreak over.

The legislation addresses registration and inspection of cooling towers. It requires owners to create and file a plan to maintain equipment to comply with Section 7.2 of ANSI/ ASHRAE Standard 188-2915: Risk Management for Building Water Systems.

“Although the circumstances surrounding its use are tragic, ASHRAE is grateful that the standard is available to set requirements to manage risk of this bacteria. We are hopeful other governments will follow the lead of the New York City council to help safeguard public health,” said David Underwood, ASHRAE president.

This standard provides minimum Legionellosis risk management requirements for the design, construction, commissioning, operation, maintenance, repair, replacement and expansion of new and existing buildings, as well as their water systems and components.

In Canada, there are five confirmed cases of Legionnaires’ disease in Dartmouth, NS, in a multi-level apartment building. At press time, the Nova Scotia Health Authority had confirmed the death of one of the patients.

Previous cases in Canada include a 2012 outbreak in Quebec City, which killed 13 people and infected 170 others. In addition, an outbreak in a Toronto, ON nursing home in 2005 resulted in 21 deaths.

Underwood said that ASHRAE is continuing its work on getting the full standard adopted in New York City and in other locations.

For more on outbreaks associated with building potable water systems, see p26. www.ashrae.org SKILLED TRADES COLLEGE INTRODUCES PLUMBING PROGRAM Vaughan’s Skilled Trades College (STC) is launching its first formalized plumbing apprenticeship-training program.

This course will follow the same hands-on and in-class format as STC’s electrical training apprenticeship. The plumbing program will be offered over an intensive 12-week full-time program and as a flexible 24-weekend part-time program. This is STC’s first plumbing program and it is expected to begin in November 2015. www.skilledtradescollege.ca HPACMAG.COM

Will St. Amour’s winning heating system design.

EDMONTON CONTRACTOR IN THE RUNNING FOR A TRIP TO ITALY Will St. Amour of Amour Mechanical Services in Edmonton, AB, has been presented with the monthly winning entry award in the Caleffi Excellence contest. St. Amour was tasked with providing a heating system that would deliver comfortable heat to a community airport hangar, while ensuring minimal energy consumption. He installed a Caleffi 548 Series hydro separator and 5026 Series air vents.

St. Amour’s design received the most audience votes during a recent Coffee with Caleffi webinar. He will be given an iPad mini for his design and is now a contender for the grand prize; a trip to Italy to view Caleffi’s global headquarters. www.caleffi.com RSES CANADA RELEASES PROGRAM FOR 2015 SEMINAR AND AGM The Refrigeration Service Engineers Society (RSES) Canada has announced the speakers for its 2015 Seminar and Annual General Meeting on November 6 to Andre Patenaude 7. The event, which will be held at Humber will open RSES College, North Campus in Toronto, ON, Canada’s 2015 seminar with a opens with Andre Patenaude director – session on CO2 CO2 business development, Emerson refrigerants.

Climate Technologies, discussing applications for CO2 refrigerants.

The commercial refrigeration industry is challenged with increasing energy efficiency and environmental regulations. As a result, it is deploying different refrigeration system technologies, system architectures and refrigerants in various end-use applications. During the last five years, there has been significant global activity in the supermarket industry, specifically with CO2 refrigeration systems, and this is expected to continue.

Patenaude, who has over 30 years of marketing, sales and continued on p10 OCTOBER 2015 | HPAC

9

< INDUSTRY NEWS continued from 9 technical service experience working directly with end users, contractors, wholesalers and OEMs, also has significant experience with various refrigeration system architectures, system applications, contractor/installation processes and component technologies.

Patenaude earned his undergraduate degree in mechanical engineering technology from Algonquin College in Ottawa, ON, and has served as director of the manufacturer’s division of the Heating, Refrigeration and Air Conditioning Institute. In addition to his involvement with the RSES, he is also an active member of the Ontario Association of Certified Engineering Technicians and Technologists, and ASHRAE. Other speakers on the RSES program include Roy Liew-Kie-Song of Yaskawa America Inc. who will share his expertise on HVAC VFD drives. Ian Allison of Lennox Industries will present Lennox Prodigy Training, and Phil

Boudreau of Bitzer Canada will tackle start-up and commissioning of commercial/industrial compressors.

For more information and registration details e-mail Nick Reggi at dreggi@cogeco.ca. www.rsescanada.com TSSA APPOINTS NEW OPERATING ENGINEER CHIEF OFFICER Mike Adams, Technical Standards and Safety Authority (TSSA), statutory director for the Boiler and Pressure Vessels and Operating Engineers Safety Programs (BPV/OE), has been appointed to the position of TSSA operating engineer chief officer. This position consolidates both chief officer functions into a single role, and follows the retirement of John Coulter.

Adams, who has worked with TSSA for over four years as a statutory director, has an additional 20 years experience in the Canadian Navy as a marine engineer. He earned his engi-

neering Certificate of Competency in the early eighties and has served on several steam destroyers. He also held the role of chief examiner marine, engineering at the Naval Officer Training Centre. He later managed the Navy’s research and development program for fuel cell power systems before becoming a project manager.

He was with Science Applications International Corporation (an engineering services company) before joining TSSA in 2011.

Adams holds a bachelor’s degree in mechanical engineering and a master’s degree in electrical engineering (with two patents). He is a registered P. Eng. in Ontario and a certified Project Management Professional. www.tssa.org NEW LEADERSHIP AT MR. ROOTER PLUMBING Mr. Rooter Plumbing has named Doyle James president of the Mr. Rooter Plumbing organization. Doyle will be succeeding Mary Kennedy Doyle James, Thompson who is assum- president, ing the position of chief Mr. Rooter Plumbing operating officer of Dwyer Group.

James has been with the Mr. Rooter plumbing since 1989 and began as a franchisee. His franchisee was one of the first after the Mr. Rooter organization was acquired by what would become The Dwyer Group. James moved from his role in franchise support to vice president of operations for Aire Serve Heating & Air Conditioning and later became the chief operations officer for Aire Serv in 2003. James was appointed president of Aire Serv in 2004, and under his leadership Aire Serv now has over 190 locations.

Steve Truett replaces James as president of Aire Serv. http://mrrooter.com continued on p12

10

HPAC | OCTOBER 2015

HPACMAG.COM

proven performance “Genetron Performax LT is the refrigerant that most closely resembles R-22, so it makes for a fairly pain-free retrofit process.” ®

Charlie Lowe Director of Refrigeration/HVAC/Lighting/Food Equipment Services, K-VA-T Food Stores, Inc.

Genetron Performax® LT (R-407F) “Makes Sense” for New Supermarkets.

In summer 2013, Lowe and his team set up a product comparison with R-407F in a brand new store that was designed to run R-407A. Lowe controlled for operating conditions such as humidity and ambient temperature, and ran the two products with three parallel refrigerant racks to compare energy performance. “We monitored all the systems, including condensers. In some cases, R-407F allows a compressor to Refillable cylinders available in Canada.

cycle off, which saves energy,” according to Lowe. “The energy savings ranged from 1.22% on one rack to a high of 8.3% on another. The store

as a whole averaged 3.8% lower energy usage with Performax LT vs. R-407A. The payback is short enough to justify using R-407F over R-407A.” Other Genetron Performax LT features include industry-leading capacity and lower global warming potential compared to other R-22 alternatives for refrigeration.

Canadian Refillable Cylinders Available

To learn more about Honeywell Genetron Performax LT, visit www.honeywell-refrigerants.com. or call 1-800-631-8138

© 2015 Honeywell International Inc. All rights reserved.

Read the case study

< INDUSTRY NEWS continued from 10

ASSESSING THE CURRENT GREEN BUILDING JUNCTURE On October 1, Sustainable Buildings Canada (SBC) hosted its Green Building Festival in Toronto, ON at Daniels Spectrum. The theme this year was Mike Singleton, SBC executive diBuilding Resilient Com- rector, presents a $2000 cheque to Habitat for Humanity GTA to Angela munities with a focus on Solomos, Habitat’s senior director creating a greener build- of corporate partnerships. ing society.

In the Planning, Programs, Codes portion of the program, Alex Lukachko, senior associate at Building Science Consulting Inc. said that, “the initial wave of green buildings has gone through, but now people are asking questions – what other expectations do we have of green buildings?” He noted that newly found skepticism is good because green buildings need to be refined by updated building codes.

“Building code-driven changes are slow to happen, but have the potential to be profound,” Lukachko said.

SBC also recognized three individuals with lifetime achievement awards at the festival. Bob Bach, SBC treasurer, presented the awards, however only Jiri Skopek, architect and founder of SBC, was present to accept. Dr. Louise Comeau, environmentalist and Gord Miller, current green party candidate in Guelph, ON, were the two recipients not present.

As in previous years, SBC gave a cheque to Habitat for Humanity Greater Toronto Area (GTA) that accounts for 10 per cent of attendee revenue. The cheque this year, presented by 12

HPAC | OCTOBER 2015

Mike Singleton, SBC executive director, was for $2000.

Angela Solomos, senior director of corporate partnerships, Habitat for Humanity GTA, was present to accept it.

Toronto has joined 20 cities around the world to host a 2016 Sustainable Built Environment regional conference on September 19-20. This conference will lead up to the worldwide conference to be held in Hong Kong in 2017. www.sbcanada.org

Photo Gary Porter Photography

KITCHEN AND BATH BRANDS GALORE AT VEGAS SHOW The 2016 Kitchen and Bath Industry Show (KBIS) and its Voices From The Industry (VFTI) programs are being held in the North and South halls of the Las Vegas Convention Centre from January 19 to 21, 2016.

A founding member of Design and Construction Week, KBIS is merging with the International Builders’ Show (IBS), the International Window Coverings Expo (IWCE) and the International Surface Event. Combined, these organizations make up Design and Construction Week.

Last year, this week attracted 132,000 industry professionals – nearly 10,000 more than originally projected.

KBIS 2016 is hosting upwards of 500 brands, and has attracted 40 new companies to their show. Over 90 VFTI sessions will be presented and many will offer continuing education units.

Registration is open for the show. www.kbis.com

From left, John Macdonald, president and CEO, Enercare is joined

by Tracy MacCharles, Minister Responsible for Women’s Issues and former Minister for Consumer Services, Dianne Young, CEO, Exhibition Place and Larry Ryan, SVP and GM Ontario Home Services, Enercare, at the ribbon cutting ceremony for the renamed Enercare Centre at Exhibition Place in Toronto.

ENERCARE ENTERS THE SECOND PHASE OF ITS GRAND REBRAND On September 16, 2015, Enercare held an upbeat grand rebrand event at Exhibition Place in Toronto, ON. The company announced that it is unveiling the second phase of its rebranding efforts with the launch of its first-ever fully integrated mass media advertising campaign.

The event showcased a barbershop quartet, The Watch, whose voices mirrored the foundation of the campaign: that Enercare’s home protection plans will work in perfect ‘harmony’ with the equipment in the homes of customers.

“I really value companies that are Canadian-owned,” said Damian Warner, Canadian decathlete and Pan Am games continued on p14 HPACMAG.COM

Beauty

Beast

meets

U.S. Patent #8235316, #8714917, #8769730 and Patents Pending

The new macerating toilet with RazorCutTM technology.

Making impossible bathrooms possible.

800.543.2550 libertypumps.com Copyright Š Liberty Pumps, Inc. 2015 All rights reserved.

1.28 GPF

SECURITY CHIMNEYS

< INDUSTRY NEWS continued from 12

SECURE SEAL SINGLE AND DOUBLE WALL GAS VENT

Damian Warner, Canadian decathlete and Pan Am games gold medalist, speaks at Enercare’s grand rebrand event.

STRINGENT STANDARDS FOR QUALITY ASSURANCE To guarantee a perfect fit every time and to avoid built-in stress points or weak areas, tube ends are formed under stringent guidelines and held to exacting standards.

BUILT TO LAST

Secure Seal features a smooth weld seam inside and out, which is completely shielded during the welding process.

gold medalist. Warner spoke at the event drawing parallels between representing Canada as an athlete and as a company. “It’s important to evaluate, modify and implement change,” he said.

John Macdonald, president and CEO, Enercare, said that 160 jobs have been created with the rebranding. “We have more than 1.2 million customers and approximately 1000 employees in Ontario, so while we’re a very large company, many people still don’t know who we are and the services we provide.”

As part of the campaign, the company has a 30-second television spot that shows a quartet of Enercare technicians servicing different heating, cooling and plumbing equipment in a home while singing a HVAC themed barbershop quartet song. The Watch sang this tune to conclude the event. www.enercare.ca

The 2014 Construct Canada exhibit hall.

For more information scan QR Code, follow us on social media or visit securitychimneys.com

securitychimneys.com

800-361-4909 US 800-667-3387 Canada Security Chimneys © 2015

THE ANNUAL CONSTRUCT CANADA SHOW IS RIGHT AROUND THE CORNER The 27th Annual Construct Canada will be held on December 2 to 4, 2015 at the Metro Toronto Convention Centre. It is being held simultaneously with the PM Expo, HomeBuilder and Renovator Expo and the World of Concrete Pavilion in the South building, with IIDEXCanada in the North building.

The combined shows make up The Buildings Show. There will be over 1600 exhibits, including 100 international exhibitors. Registration is now open and there is free entry into the show. When you visit Construct Canada, be sure to stop by booth 341 to say hello to the HPAC team. www.constructcanada.com continued on p16

14

HPAC | OCTOBER 2015

HPACMAG.COM

© 2015 Masco Canada LImited

SIMPLY SMART.

Designed to meet the demand for durable contemporary electronic faucets and flush valves, Delta’s commercial DEMD Series not only look great, they are available in water-efficient* models that can help you attain LEED® certification. The series is available in single hole deck mount, wall mount and a cost efficient electronic metering model.

All Delta commercial products are backed by an exceptional 5-year limited warranty. deltacommercialfaucets.ca

* Water-Efficient Products: Lavatory Faucets: flow rate of 1.5 gpm @ 60 psi (5.7 L/min @ 414 kPa) versus Industry Standard ASME A112.18.1 / CSA B125.1 of 2.2 gpm @ 60 psi (8.3 L/min @ 414 kPa).

Urinal Flush Valves: 0.5 gpf (1.9 Lpf) or 0.125 gpf (0.5 Lpf), IAPMO listed to CSA B125.3 / ASSE 1037.

LEED® is a registered trademark of the U.S. Green Building Council.

< INDUSTRY NEWS continued from 14 BILL FALLOW RECEIVES THE 2015 JOSEPH K. SEIDNER AWARD Bill Fallow, P. Eng, chief plumbing inspector, technical inspection services, department of public Bill Fallow (r) accepts the Joseph safety in New Brunswick, K. Seidner Award from Kevin Ernst, was presented with the PIAC chair.

Joseph K. Seidner Award in August at the annual Canadian Advisory Council on Plumbing meeting in Vancouver, BC. Fallow is the fifteenth recipient of this award, which recognizes outstanding contributions to Canadian plumbing codes and standards.

In his acceptance speech, Fallow noted that the award was the result of the dedication of many in the room that he has had the honour of working with over the last two decades.

“Bill has been an integral part of the codes and standards development community, participating on several committees, task groups and industry advisory bodies over the years,” said Kevin Ernst, PIAC Chair.

The Canadian Institute of Plumbing & Heating (CIPH) board of directors established the award in November 2000 to honour Joe Seidner, the first recipient and an industry leader and friend of CIPH. Seidner passed away in 2003 at the age of 96. www.ciph.com TEAMING UP TO REDUCE WATER USAGE ON CAMPUS The Canadian Institute of Plumbing & Heating (CIPH) is once again challenging Canadian college and university students to develop a viable plan to reduce water-use on campus.

Teams, which can include students, staff and faculty, can participate during one of the two school semesters with the winners announced on World Plumbing Day, which is on March 11, 2016. Within each semester, teams must create a practical, detailed and technical approach to their water reduction action plan. This competition is in its third year and is part of the CIPH CareerTap program.

“We will continue to motivate some of the country’s most innovative, forward-thinking students to participate and do their part in thinking about the importance of water use,” said Ralph Suppa, CIPH president and general manager.

Aside from the motivation to create an environmentally friendly campus, individual and team benefits include working with CIPH mentors through the association’s Young Executive Society and $50 Visa gift cards for participants. The first place prize is $3,000, and the second place prize is $1,500. www.ciph.com 16

HPAC | OCTOBER 2015

POPULAR TRAINER JOINS PLASTIC PIPE INSTITUE IN ENGINEERING ROLE The Plastics Pipe Institute, Inc., (PPI) recently announced that Lance MacNevin, P. Eng. has joined the association as director of engineering, building and construction (BCD) and conduit (CD) divisions. MacNevin, a 22-year industry veteran, will be responsible for each division’s technical, market- Lance MacNevin, P.Eng., is well-known ing, educational and industry outreach as a trainer and programs. He will also be PPI’s spokes- for his active role in many industry person in the building, construction, associations and plumbing, communication and electri- standards bodies. cal sectors where products such as PEX and CPVC pipe and high-density polyethylene (HDPE) conduit are used.

MacNevin, who is a contributor to HPAC magazine, will continue to be active within industry organizations where standards and codes are established and updated. He is a mechanical engineering graduate from the University of New Brunswick.

MacNevin joins PPI from REHAU where, most recently, he managed the REHAU Academy, the company’s training unit for contractors, engineers and architects. He was responsible for creating technical training programs for REHAU construction products used in heating, cooling, snow and ice melting, HVAC controls, plumbing, water service and geothermal systems. He was also REHAU’s senior codes and standards specialist, participating in the technical committees of ASME, ASTM, AWWA, CSA and NSF. PPI is the major trade association representing all segments of the plastic pipe industry and is dedicated to promoting plastics as the material of choice for pipe applications. www.plasticpipe.org

CMPX 2016 IS GEARING UP TO BE AN INFORMATIVE EXPO The Canadian Mechanical and Plumbing Exposition (CMPX), is set for March 16 to 18, 2016 at the Metro Toronto Convention Centre. There will be over 500 exhibitors and many new products. The show will feature a van give-away, Learning Forum sessions and a technical program. Be sure to stop by HPAC Magazine’s booth at the top of the escalator. www.cmpxshow.com HPACMAG.COM

simply radiant

Systems for life.

It’s all about you. Smart comfort, pre-programmed by you to meet your individual heating and cooling needs…this is HeatLink’s radiant hydronic system. In-tune with your schedule, and yet flexible enough to go with the flow, it would almost seem as if there was a genius…or genie, in your mechanical room. Effortless, efficient, and understated… literally! HeatLink’s radiant hydronic heating and cooling systems are engineered to create a comfortable, affordable and energy efficient environment for living. Designed for peace of mind, they are easy to use and have a full warranty. For more information please visit: www.heatlink.com

< HEATING

Déjà vu, all over again

BY IAN MCTEER

HVAC contractors in Canada know very well that the bulk of their time is spent preparing for, or dealing with winter. One of the most important requirements for any heating system is maintenance. Every device, and the distribution system it connects to must be inspected every year. The annual preventive maintenance (PM) service call provides an opportunity to sell new equipment, accessories and services.

Modern heating and cooling systems that are AHRI rated and matched combinations, when properly specified, installed (including commissioning) and maintained (PSIM), will provide reliable service for many years.

Another benefit of PSIM is reduced greenhouse gas emissions, not only from the HVAC system, but from the fleet of service trucks running around making unnecessary service calls.

SAFETY AND PERFORMANCE The primary reason for maintenance is to prevent failures. But, before a tool or gauge is connected to any heating appliance, there is a host of safety checks that must be performed to ensure fossil-fueled appliances are capable of working safely (see Steps 1 to 13). Code requirements, municipal by-laws, manufacturer’s instructions, insurance company rules and fuel distributor regulations can all make the modern PM task complicated.

Each type of appliance will have its own set of rules and regulations. When an HVAC contractor maintains his or her own work, especially when it meets PSIM, maintenance should not be too difficult. However, it is the “other guy’s” job, encountered every day that needs a thorough maintenance inspection. Of course, technicians must be prepared to red tag unsafe appliances.

Step-by-step guide to preventive maintenance

Let us take a look at what a maintenance call to a residential high efficiency gas furnace might look like. We are going to look at the appliance and its accessories. Apart from all the necessary tools and instruments, the maintenance technician needs to have three things: knowledge, experience and a bright flashlight. Do not go near the appliance until its external infrastructure has been examined.

Step 1: Upon arrival at the jobsite, ask the customer for permission to enter the yard in order to examine the vent terminal. Note the configuration of the terminal. Does it meet the gas code and manufacturers’ specifications for clearance to grade/windows/doors/inside corners/air intakes/gas regulator vents? Check for blockages or customer installed screening. Ask the customer why the screen was necessary. Check any other accessory vent termination, such as from a gas fireplace or HRV. Vertical chimneys used with older draft hood equipped or 80 per cent AFUE appliances must be visually inspected for deterioration, missing wind caps or blockages.

Clock the gas meter for each appliance to be sure input is correct.

During outdoor inspection, check the gas pressure regulator vent.

It should be behind the meter and be clear of obstructions.

Check for proper vent termination per code and manufacturers’ instructions.

Inspect vertical terminations for plastic vents and metal chimneys.

I’LL BE BACK The Quebec singer-songwriter Gilles Vigneault wrote, “Mon pays ce n’est pas un pays, c’est l’hiver” (my country is not a country, it is winter). Winter is just around the corner, leaving just enough time for a couple of cooling system installations and a quick vacation. Otherwise, before Frankie MacDonald can say, ”Major blizzard to hit St. John’s,” HVAC maintenance will start all over again.

Ian McTeer is an HVAC consultant with 35 years experience in the industry. Most recently he was a field rep for Trane Canada DSO. McTeer is a refrigeration mechanic and Class 1 Gas technician.

18

HPAC | OCTOBER 2015

HPACMAG.COM

Step 2: Interview the customer. Ask about unusual sounds, odours, filter maintenance, poor heat distribution, too much or too little humidity, or furnace failures. Listen carefully for clues to system performance problems. Get permission to do a room-by-room check looking for open floor registers and blocked return air grilles. Ask if the appliance installation instructions are available for reference, if necessary.

Step 3: Locate the thermostat. Depending on the existing thermostat, this would be an ideal time to offer the customer an upgraded thermostat. Get the old mercury bulb or battery operated control out of there – no more batteries to the landfill. Several manufacturers offer WiFi thermostats that communicate with a relay panel capable of operating just about any type of heating device. Most of these controllers have a test mode, a diagnostic screen with a history of events, a cycle rate screen showing burner or AC runtimes, and improved continuous fan control. Check the diagnostic log for a history of events if such a device is already installed. Ask the customer how any indicated failures were resolved.

Step 4: Move to the appliance location. On the way, inspect the horizontal venting (looking for sags, leaks, vent pipe running level, homeowner caused damage) and the gas pip-

Improper vent termination can lead to recirculation of flue gas.

Inspect all gas line lines – is this bend appropriate?

ing. Typically, plastic vent pipe must have support every three or four feet and be continuously sloped toward the furnace at 0.25 in. per foot.

Step 5: The furnace room is where things get busy. Look at the number of appliances in the room. Determine where they are getting their combustion air. Many gas and oil-fired appliances continue to use indoor air for combustion. The gas code spells out specifically how much air is necessary, although some manufacturers’ instructions may be more “stringent” and must be followed in lieu of the code. Even though most sealed combustion appliances are approved to take air for combustion from within the building envelop, the tech must decide if there is enough air. Does the furnace room qualify as a “confined space” or not? Many homeowners have inadvertently put themselves at risk by enclosing the furnace room and restricting combustion air to the furnace or boiler and water heater.

Step 6: Check vent connections at the appliance(s). Inspect the vertical chimney and its vent connectors. Inspect condensate drain piping – it must be connected to an open/ vented drain or condensate pump.

Step 7: Move to the appliance(s). With the visual safety checks mostly done, maintenance of performance is the next

Does the existing thermostat allow the technician access to performance data? Be sure to check for diagnostic codes or a history of failures.

Inspect horizontal venting for leaks, sags, and improper slope.

Gravity drain lines must be clear, leak free and should terminate at an open/vented drain or condensate pump (pumping to an open/ vented drain or sump pit).

Burners must be clean – it only takes a tiny amount of lint in the cross-lighter to cause a lockout.

Why is this burner rusted on top? Check for contaminated combustion air – re-circulation of flue gas.

continued on p20 HPACMAG.COM

OCTOBER 2015 | HPAC

19

< HEATING continued from 19

Why is this burner rusty?

Contaminated fuel (LP), or contaminated combustion air?

Simply replacing the flame rod is no guarantee of reliable performance. Read the flame signal.

most important item. Maintenance means CLEAN: Start at the evaporator coil. It must be clean. After the coil inspection/ cleaning, examine the heat exchanger for cracks or deterioration. Then, check the combustion chamber: burners must be clean, no rust, no dirt/lint in the cross-lighters. This is especially important for appliances taking indoor air for combustion near laundry rooms. When using outdoor air, check the

Blower wheels must be clean.

The fin-tube secondary heat exchanger shown here has too much dirt accumulation.

burner air inlet screen for blockage. Replacing the flame rod does not necessarily put flame signal problems to rest. Ohmout the hot surface igniter remembering it must be at room temperature for a proper reading.

Step 8: Check pressure switch tubing for cracks/moisture.

Some furnaces allow vent condensate to run through the ventor assembly, other route condensate around ventor as-

Keep Your Analyzers On The Job + More Money In Your Pocket American-made Bacharach combustion analyzers are designed to work for you around the clock and at the lowest cost. Replaceable B-Smart® sensors, batteries and probes mean you don’t need to send your analyzers back to a repair center for basic maintenance.

GET

100 BACK

$

Part# 0024-8518

Up Get

In Reba tes

To FRO

M SEP 11, 2 T. 1 - DEC.

015

Get additional details and rebate claim forms at:

www.Tune-Rite.com/offers

GET

25 BACK

$

Fyrite INSIGHT Plus ®

®

Commercial/Residential Combustion Analyzer with award-winning Tune-Rite™ software, 3-year O2 sensor, wireless printer, hard carry case and FREE Reporting App.

OR A FREE ($199 value)

Fyrite InTech ®

®

Residential Combustion Analyzer with B-Smart® CO Sensor, 2-year O2 sensor, wireless printer, hard carry case and FREE Reporting App.

Part# 0024-8512 BOTH ANALYZERS USE THE NEW BACHARACH REPORTING APP!

www.MyBacharach.com | 20 Amber Street - Unit 7 | Markham, Ontario L3R 5P4 | (905) 470-8985 | Support@BachCan.ca 20

HPAC | OCTOBER 2015

HPACMAG.COM

Install MERV 11 or better cabinet-style air filter horizontally in the drop duct.

Return air boot should have a round throat.

Some control boards have flame current test points. On the board shown here, place a voltmeter set to the DC volts scale and read across E35 & E36.

1 VDC = 1 DC Microamp.

sembly. This tubing must be clean, also check for and repair any leaks. Are component wiring connections tight? Is there any sign of wire abrasion or discoloured insulation?

Step 9: Remove air filter, open the blower door and inspect the blower wheel. Remove the entire blower assembly if the wheel is dirty. Clean the blower wheel and the secondary heat exchanger. This is an ideal time to upgrade the homeowner to (at least) a MERV 11 air filter cabinet. Apart from the improved indoor air quality benefits, it is going to keep the important air handling components much cleaner. Low voltage wiring connections at the control board must be tight – look for signs of moisture in the blower compartment. Determine how it got there. Blow out the trap and drains and clean the condensate pump.

Step 10: To do performance testing start the unit and listen for unusual sounds. Then, check gas pressure by performing supply side static and working pressure tests. Do a manifold test (remember to check both stages on a twostage model). Then, connect a dual input manometer to a sealed combustion furnace in order to verify pressure switch operation – if the start-up deep negative pressure is correct, then the venting system is clear. Then, check flame signal. After unit has run 10 minutes, do a temperature rise test. Check limit control operation by blocking off return air at the air filter.

Step 11: Accessories. Clean the humidifier components and check operation. If customer has complained about humidifier operation, a more detailed inspection will be needed. Perhaps a bypass humidifier is not the right one for this particular application.

Step 12: More Accessories. Remove and clean the HRV core. Clean the HRV filters and blow out the drain. Test operation.

Step 13: Remind the customer to replace batteries in smoke alarms and CO detectors.

HPACMAG.COM

THE OBSERVER® COMMUNICATING CONTROL WITH WI-FI® CAPABILITY

Comfort made even easier.

Home comfort that you can control anywhere*.

• Control home climate from anywhere with mobile device • Touchscreen home wall control • Optimal humidity and comfort control • Control up to 6 zones • Maximize energy and money savings • Maintenance reminders and text-based diagnostics

GoKeepRite.com Heating & Cooling Products

See warranty certificate for details.

Timely registration required.

See warranty certificate for details and restrictions.

*When installed as part of a complete Observer® Communicating System, including the Observer Wall Control and integrated zoning. Wi-Fi® is a registered trademark of the Wi-Fi Alliance Corporation. © 2015 International Comfort Products

OCTOBER 2015 | HPAC

15-ICA-0003 M1mp KeepRite WiFi Trade Ad 3.375x10.indd 1

21

4/13/15 7:37 PM

< SOFTWARE

HOW TO

MANAGE PAYMENT

DATA A look at the widening scope of online payment services provided by financial institutions.

M

uch of what contractors do with software has to do with the handling of money. More than their peers in many other lines of business, contractors must monitor, record and attribute a wide, and sometimes unpredictable array of expenses. Getting it right often spells the difference between profit and a debilitating loss on a project. Furthermore, errors in reporting can have legal and regulatory repercussions.

IT systems that manage these chores have become more powerful and, with the help of cloud computing, more affordable. Contractors, however, should also keep an eye on a parallel trend – the widening scope of online payment services provided by financial institutions.

The charge has been led by credit card providers such as Visa and MasterCard. A decade ago, credit and debit cards were reserved for occasional purchases such as office supplies. Today, businesses are using these technologies increasingly for strategic expenditures that were formerly handled by purchase orders.

The key is a myriad variations on the 22

HPAC | OCTOBER 2015

traditional credit card that are collectively referred to as purchasing cards, or p-cards.

Unlike their forbears, p-cards often involve no plastic at all, but 16-digit virtual card numbers that can be assigned for specific cost centres and then returned to a pool and re-assigned. The advantage for businesses is that they gain access to sophisticated online portals for monitoring and tracking expenses, assigning spending authorities and reporting for regulatory purposes. Essentially, this allows them to outsource various aspects of their e-procurement.

“P-card use has expanded well beyond traditional plastic card usage by employees for the purchases of goods and services,” says Patrick Sulston, vice-president and senior business leader, commercial business development at MasterCard Canada.

According to a 2014 North American study conducted by the RMPG research corporation, 18 per cent of businesses are using p-cards for strategic spending, 10 per cent say they will in the next year and a further 20 per cent will over the next three years.

Mike Patterson, market management

– Wholesale Card Solutions at Citi Canada, says p-card adoption for very large contractors is in step with other industries, but that smaller providers are lagging behind the curve. “Typically, adoption slows in the construction sector as you move towards the small to mid-sized businesses,” he notes.

Through the supporting management portals, the p-card systems give contractors access to a suite of expense-monitoring tools that allow managers to achieve a fine degree of control over the day-by-day spend.

Essentially, contractors are getting “an expense product that can help them streamline their processes, and at the same time give them information that consolidates where they spend money and who spends what,” says Don Manson, senior manager for Commercial Cards at Scotiabank.

Restricting purchases to preferred vendors – allowing for volume discounts – is one aspect of this level of control.

An important feature is real-time reporting of irregularities. “You can use reporting tools to ensure compliance without process overload,” says Sulston. “Rather than having to monitor individual transactions, contractors HPACMAG.COM

Photo: Ben Clark Photography/Square

By Jacob Stoller

“… p-card adoption for very large contractors is in step with other industries, but that smaller providers are lagging behind the curve.” can oversee and manage purchasing card programs by exception.”

Much of the benefit to the bottom line, Patterson notes, is around speed.

RPMG, for example, reports a 60 per cent-plus improvement in the time between order and the receipt of goods.

All this helps contractors improve their working capital, making them more competitive.

Contractors will find growing pressure from their customers to accept them. Since vendor fees finance the card systems, card providers are hoping that the appeal of a shorter payment cycle will encourage more contractors to sign on. To sweeten the pot, they have also begun to provide

volume discounts on large transactions. As well, payment could get even faster. A method called straightthrough processing, where payments are processed immediately upon invoice, is now being adopted by some organizations in the U.S. Another improvement on the receivables front is mobile technology for accepting traditional credit cards.

One that is attracting a lot of attention is Square, a system that allows anybody to collect payments in the field using a credit card through a portable device that attaches to a computer or cell phone.

A mechanical contractor, for example, could equip its service techni-

cians with these devices, enabling them to collect payment for service calls on the spot.

“Square has many features perfect for contractors, such as a mobile invoicing feature and offline mode which allows you to take a payment even if you don’t have a reliable signal on your phone,” says Jenny He, communications lead, Square Canada.

Like the card providers, Square provides online tools for tracking of transactions, which includes integration with QuickBooks and other popular software packages.

Jacob Stoller is a principal of Torontobased consultancy StollerStrategies.

Using PVC/CPVC to vent a condensing boiler

Walking On Thin Ice DURABLE MATERIAL FOR CONDENSING BOILER FLUE VENTING. Trust Heatfab Saf-T Vent’s 20 years of experience for your next job: the most secure locking seal on the market.

heatfab.com / (800) 772-0739 HEATFAB SINGLE WALL IS COMPETITIVELY PRICED AGAINST PLASTIC VENTING & HAS ZERO CLEARANCE APPLICATIONS. CALL TO INQUIRE. *WON’T MELT ON OVER-FIRING BOILERS & HAS ZERO FLAME/SMOKE SPREAD RATING AL 29-4C IS A REGISTERED TRADEMARK OF ATI PROPERTIES, INC

HPACMAG.COM

OCTOBER 2015 | HPAC

23

Paul Myers stands beside his company van outside of Lions Gate Hospital.

Plumber shares his good fortune Hospital redevelopment gets $25-million shot in the arm from HVAC entrepreneur.

P

aul Myers, owner of Keith Plumbing and Heating Co. Ltd. in North Vancouver recently created a media flurry when he donated $25 million to Lions Gate Hospital Foundation in Vancouver, BC. Myers’ gift, which is the largest single donation made to a hospital foundation by an individual in British Columbia’s history, will support a redevelopment of the Lions Gate Hospital site.

“This is an extraordinarily generous gift from an exceptional person,” said Judy Savage, Lions Gate Hospital Foundation president. “It marks the first step in addressing the challenges from Lions Gate Hospital’s aging infrastructure. This donation is truly representative of the incredibly generous community we have here on the North Shore.”

“I’m just a plumber who worked hard and had some good luck in my life,” said Myers. “When I thought about where I could have the greatest impact, I immediately thought of Lions Gate Hospital. I learned about the impact the Foundation is having and its excit-

24

HPAC | OCTOBER 2015

ing plans for the future and knew this is where I wanted to make a difference.”

Plans for the redevelopment of the Lions Gate Hospital site have been under discussion for the last five years with more detailed planning involving staff and physicians beginning a couple of years ago.

Myers and his company have a rich history in the North Shore area. Myers has lived in the area for over 78 years.

Keith Plumbing and Heating opened its doors in 1911 when the City of North Vancouver was just four years old and on the verge of a building boom. Known as “The City of Houses”, North Vancouver was fertile ground for development and the new residential plumbing contractor expanded as homes on the North Shore became increasingly numerous and sophisticated.

The company incorporated as Keith Plumbing and Heating Co. In 1949 changing consumption patterns in the early fifties saw the company proactivley add a selection of household appliances to its range of products and services. The company history indi-

cates that “at one point you could walk into their showroom and purchase a new television set or a stateof-the-art electric stove.”

Myers joined the company in 1954 as a plumbing apprentice. By 1970, the appliances were gone, Keith Plumbing and Heating Co. was doing $350,000 a year in business, Myers owned the company, and its tradition of staying on the leading edge continued.

The company has transformed from a residential plumbing contractor to one of BC’s and the Yukon’s largest mechanical contractors employing up to 200 people. Specializing in plumbing, heating, ventilation and air-conditioning for hospitals, laboratories and major construction projects, Keith Plumbing and Heating Co. has been a partner in projects throughout BC and the Yukon since its inception. Myers also owns Keith Panel Systems and Keith Panel Systems USA Ltd. A recipient of the Lifetime Achievement Award from the Vancouver Regional Construction Association, Myers is a former director of the Construction Labour Relations Association of BC (CLR) and the Mechanical Industrial Relations Association (MIRA).

Health care is one area in which Keith Plumbing and Heating has been particularly successful. Contracts include Kamloops Hospital, Royal Jubilee in Victoria and the Hope Centre for mental health. “We have done more hospitals than any other contractor in BC,” said Myers.

When asked to sum up his reasons for choosing to give so much back to his community, Myer’s answer is simply, “Well, I can’t take it with me.”

In recognition of Myers’ gift, Lions Gate Hospital’s South Acute Tower will be named the Paul Myers Tower.

Representative signage will be installed on the west side of the tower by the end of the year and in the meantime, a bio plaque and door signage will be installed at the tower’s 13th Street entrance.

Photo Lions Gate Hospital Foundation

< PHILANTHROPY

HPACMAG.COM

Navien innovation.

Now available in a boiler.

Introducing the Navien NHB condensing boilers As the leader in condensing technology, Navien has already reinvented the water heating industry with the award-winning NPE tankless water heaters and the NCB combi-boilers. The new NHB boiler series is the next in line of innovations from Navien. All NHB boilers have Navien’s advanced burner system, an AFUE of 95% and turn down ratios up to 15:1. Now available in four sizes: NHB-55, NHB-80, NHB-110 and NHB-150.

Reinvent your thinking about boilers at BoilersMadeSmart.com or Navien.com.

NEW NHB Installation Video Installer Dave Yates of F.W. Behler, Inc. gives this product a “two thumbs up” while he fully expects to see an energy consumption reduction of 30-50% for his customer.

T H E

L E A D E R

I N

C O N D E N S I N G

T E C H N O L O G Y

< PLUMBING

MYTHS & MISCONCEPTIONS Understanding the true nature of outbreaks associated with building potable water systems.

By Tim Keane

W

ith the release of ANSI/ ASHRAE Standard 1882015 Legionellosis: Risk Management for Building Water Systems, an often ignored and serious issue associated with building potable water systems is getting a lot of attention.

A common misconception is that legionnaires’ disease (LD) outbreaks are caused almost exclusively by cooling towers or HVAC systems. This is not true. A significant amount, if not a majority of LD outbreaks, are actually caused by potable water systems.

Recent outbreaks in Canada that received a lot of press include an apparent potable water outbreak in a Nova Scotia apartment building, and cooling tower related outbreaks at a Scarborough nursing home and one in Quebec City.

Cases of LD associated with cooling tower outbreaks are typically identified because there is usually a high rate of associated illness with dozens to hundreds of people getting sick in a short period of time. Outbreaks associated with potable water are just as often not identified because these outbreaks can be as few as a handful of people getting sick over days or weeks or longer.

26

HPAC | OCTOBER 2015

A study in 2003 tested pneumonia cases admitted to 15 hospitals across Canada. The results were very interesting. Of the 850 pneumonia patients tested 28 (3.2 per cent) had LD. What was very interesting in this study was that Western provinces, which were thought to have a lower incidence of LD, had a higher incidence rate with 11 cases out of 277 patients (3.9 per cent) compared to Eastern provinces with 17 out of 573 (2.9 per cent).

Another common misconception is that because LD does not appear in the news too often, the number of cases must be declining. In fact, the annual incidence of LD cases has increased dramatically. A 2011 CDC study found that U.S. LD cases increased 217 per cent from 2000 to 2009. Another CDC study, a study of waterborne diseases associated with drinking water and non-recreational water from 2009 to 2010, found that LD accounted for 58 per cent of outbreaks, 42 per cent of illnesses, 96 per cent of hospitalizations, and 100 per cent (all) deaths.

Litigation associated with Legionella cases has increased dramatically over the past decade as well. I have been

involved in many LD litigations and in most of these plumbing engineers, contractors and builders were brought into the litigation. As stated above, over the past decade this has become a real and growing issue.

Another all too common misconception is that designing plumbing systems to reduce the risk of Legionella means extra costs and less efficient systems. In fact, the same items that are recommended for engineering design to reduce the risk of Legionella colonization are also recommended by most engineering experts for water and energy savings. If you are surprised by any of the information here, do not feel badly. The lack of awareness regarding this serious issue is pervasive in public health, the healthcare industry, non-healthcare industries, associations, code development and trades.

There are very good Legionella guidelines, legally recognized ‘standards of care’ published on that are more than a decade old. These U.S. ‘standards of care’ include OSHA (1998), ASHRAE 12-2000 (2000), Joint Commission (2001) and CDC (2003), to name a few.

All of these Legionella guidelines are scientifically based and are useful and effective tools for Legionella control in plumbing design. continued on p28

HPACMAG.COM

WIN ULTIMATE

*

ENTER FOR YOUR CHANCE TO

THE

HOCKEY EXPERIENCE

Cheer your team on... anywhere in North America!

Catch a professional regular season hockey game in Canada or the U.S.A.

The Grand Prize includes: • 2 PREMIUM TICKETS • FLIGHTS AND ACCOMMODATIONS FOR 2 PEOPLE • PRE-GAME DINNER FOR 2 PEOPLE

• 2 AUTHENTIC JERSEYS • $500 CAD SPENDING MONEY * Maximum total retail value approximately $6,000 CAD

Plus 5 secondary prizes of $100 CAD Rona® gift cards

When IPEX introduced the first ULC S636 certified PVC & CPVC flue gas venting systems in 2007, we dedicated ourselves to earning your confidence. We continue to provide training seminars, installation manuals, and an expansive certified product range with a coast-to-coast distribution network. IPEX is committed to supporting you with the most complete product line to get the job done on-time and to the finished quality you expect.

PR

O U D LY M

A

A

DE

I

N

CANAD

Enter online at Scorewithsystem636.com or visit your local participating System 636 Distributor for a ballot. *Some restrictions may apply. See Scorewithsystem636.com for complete Rules and Regulations.

Contest starts on Monday, September 21, 2015 and ends on Friday, December 11, 2015.

/ipexvideos Products manufactured by IPEX Inc. System 636® is a trademark of IPEX Branding Inc.

< PLUMBING continued from 26 “ Outbreaks associated with potable water are just as often not identified because these outbreaks can be as few as a handful of people getting sick over days or weeks or longer.”

The new ANSI/ASHRAE Standard 1882015 Legionellosis: Risk Management for Building Water Systems will have an immediate impact. It will help increase awareness in the plumbing industry and will hopefully result in beneficial steps to reduce the plumbing industry’s risk of negligence litigation associated with this issue. The long term result should be improved plumbing codes, plumbing system design and plumbing products that reduce the potential for Legionella to grow in plumbing systems.

Hot water heater manufacturers ad-

dress the ‘failure to warn’ scald negligence risk associated with their product by ensuring every hot water heater manual has a full page or more on scald risk. But LD issues in the U.S. have been largely ignored, despite being associated with many different plumbing products, especially those that temper the water, reduce flow, destroy disinfectants, or allow potential for cross-connection between hot and cold water. The plumbing industry is much more concerned and aware of scalding issues even though rates of

potable water system issues associated with scalding are almost insignificant when compared to LD. Some plumbing component manufacturers aware of the market opportunities are improving existing products and developing new products to address these issues.

Tim Keane is with Legionella Risk Management, Inc. He is internationally recognized as an expert in Legionella control and has investigated numerous legionnaires’ disease outbreaks in North America. An original member of ASHRAE 188 committee, Keane has authored numerous papers and presented at scientific and industry meetings on the issue. He has provided training to engineers, plumbing designers and building operators for over a decade on best practices for controlling Legionella in building water systems. This article is adopted from an article in Viega Voice.

INLINE 400 PRESSURE BOOSTING SYSTEM

Need a water pressure boost? You can be confident in the reliability of Franklin Electric’s proven pump and motor inside a durable product housing to boost city water pressure, pressurize water from a cistern tank, and re-pressurize after filtration or during irrigation. Vertical and horizontal mounting options allow for installation flexibility within the current plumbing configuration.

This innovative, whisper quiet system uses simple flow-based controls to ensure your customers get the water pressure boost they need when they want it.

FRANKLIN ELECTRONICS, PUMP & MOTOR

Patent Pending

Experience Innovation. Experience Franklin. littlegiant.com

28

HPAC | OCTOBER 2015

HPACMAG.COM

Viega system solutions

The right choice for commercial properties “Our standard is Viega ProPress®. It’s turned out to be one of the best plumbing innovations I have had the pleasure to work with.”

The Smart Connect® feature provides installers added confidence in their ability to ensure the integrity of connections

Fred Morissette Southland Industries Las Vegas, NV

Cylindrical pipe guides ensure proper alignment Press fittings are available in multiple materials, configurations and sizes

Finish your next repair or installation faster with Viega ProPress systems.

With system-matched tools and jaws, no calibration is required and connections are made in less than seven seconds, making them ideal for large commercial or residential properties such as hotels, apartments and condos. Viega ProPress is the original copper press joining solution and is also available in stainless.

• Fast installation and repairs in occupied facilities with minimal shutdown time • Confident connections with the patented Viega Smart Connect feature • No soldering means connections are made without burn permits or fire watches For more information, call 800-976-9819 or visit www.viega.us T H E

G L O B A L

L E A D E R

I N

P L U M B I N G ,

H E AT I N G

A N D

P I P E

J O I N I N G

S Y S T E M S

< BATHR0OM SHOWCASE

QUALITY,

CLEAN &

TIMELESS Innovation is the hallmark of today’s bathrooms.

By Beth McKay

Stone Forest’s Papillion bathtubs are made of natural, eco-friendly materials. The elegant lines offer a contemporary design. www.stoneforest.com 30

HPAC | OCTOBER 2015

HPACMAG.COM

The Karing Integrated toilet from Kohler is a one-piece toilet with a tankless design and integrated bidet functionality. It also features a water-conserving flush. www.ca.kohler.com

N

orth Americans are cautious when it comes to changing bathroom trends. New textures and bright colours often send consumers running to comfortable hues they know well – white and grey.

Though these tranquil shades are, according to the National Kitchen & Bath Association (NKBA), the dominant colours for today’s bathrooms, it does not mean that current designs and products lack bold creativity. Bathroom faucets, fixtures and accessories are daring in other ways, moving towards a sleek appearance and natural materials.

Customers are also wanting modern luxurious amenities like steam showers, heated floors and anti-fog mirrors, so a modern design is not too far fetched. In fact, Garry Scott, vice president of wholesale marketing and brand development at Moen, says that Moen’s annual consumer research shows that 41 per cent of Canadians prefer modern décor for their bathrooms.

Melissa Tossell, interior designer at Sanura Design in Toronto, agrees. She says that customers like their bathrooms to appear high end. By choosing geometric shapes and using

strategic bursts of colour, consumers can achieve a high end, modern look.

Faucets and handles are characteristics that can give bathrooms a sleek modern feel without undergoing a full blown renovation. Scott explained that some of Moen’s products have interchangeable handles, which allows consumers to easily modernize their fixtures without replacing them.

ECO-FRIENDLY High end is not just a detail, it has become a standard. “I think people continued on p32

TWO-PRONGED DESIGN Brad Campeau, sales manager at Masco Canada says, “consumers are trending towards a contemporary design aesthetic with clean lines that promote simplicity, harmony and balance.”

The NKBA has also found contemporary design to be the most popular trend for North American residential bathrooms. Adding that the once oh-so popular tub and shower combo has officially split-up, with free standing tubs and walk-in showers taking their place.

“Shower and tub trims are not just a matter of function, but about creating a centerpiece for the bathroom,” Campeau says.

HPACMAG.COM

The Loft freestanding tub from American Standard features a centre drain and sleek lines. It has a clean transitional design and is a centrepiece for bathrooms. www.americanstandard.ca OCTOBER 2015 | HPAC

31

< BATHR0OM SHOWCASE continued from 31 Riobel has developed valves allowing for two or three water outlets. If the customer has, for example, one bath spout, a hand shower and a rain head, the plumber can install only one valve that will control all of these components. www.riobel.ca

Toto’s Carlyle II 1G has double cyclone technology that delivers high-efficiency flushing using one gallon of water. This one-piece toilet bowl and concave rim are coated with SanoGloss, a nano-technology glaze that keeps the toilet clean. It has a long-view global design with clean lines and skirted design. www.totousa.com

Valley Acrylic’s MEM collection is part of the Colour Me production line. This basin is hand painted by Canadian artisans and is made of Shila stone, an environmentally friendly, nonporous material. This product adds a sharp burst of colour to a bathroom and is available in different colours. www.valleyacrylic.com

should be moving towards sustainable products, which means quality products. You pay for one product, one manufacturing fee and then there is only one piece of waste,” Tossell says, adding that quality benefits the customer and is also easy on the environment.

The emphasis is not solely on water conserving products, like low flush toilets, anymore. Now it is also on products that reduce waste by having a long lifespan and products that are not harmful when disposed of.

“Natural stone is very popular right now, it is a higher end, quality product,” Tossell says.

TIME IS OF THE ESSENCE Perhaps an overlooked, but popular trend is timeliness. People want their

products and they want them fast, and luckily manufacturers are designing products with immediacy in mind. André Deland, vice president of product development and marketing communication at MAAX, says that being able to start and finish installation in a single day is an attractive option for both customer and contractor.

Customers get their product quickly, and contractors are able to work with more clients and therefore complete additional jobs. Using different product materials, such as alternatives to tile or easily serviced plumbing systems, saves time and offers “piece of mind” to all parties involved.

With these types of innovations, consumers can technically and aesthetically renovate their bathroom on a sensitive buget.

The Delta Tesla Collection includes a 60-82 in. stretchable hose with metal fittings and fits a single-hole installation. The high-arc spout swivels 360 degrees and is available in three finishes: chrome, brilliance polish nickel and brilliance stainless. www.deltafaucet.ca

Newport Brass offers a multifunction showerhead. It is available in 27 different finishes. www.newportbrass.com 32

HPAC | OCTOBER 2015

HPACMAG.COM

Blade that never needs replacing!

SANI

3

• Cost effective solution for above-floor bathroom installations • Dual access covers for easy maintenance • Only 3/4” diameter dishcharge pipe • Pre-assembled unit with two extra inlets for the addition of a sink, tub or shower.

↑ 15 ft. ↑ and/or ←150 ft.→

1-800-363-5874 saniflo.ca

• Available in round front and elongated (ADA compliant) bowl styles

A PUMP COMPANY SINCE 1958

1.28 GPF

< HYDRONICS

Tubing depth matters!

It is time to find better ways of ensuring that tubing and reinforcing mesh end up near the mid-height of the slab. BY JOHN SIEGENTHALER

A

nyone who has installed hydronic floor heating has likely watched as his or her neatly placed tubing circuits get buried in concrete.

Sometimes the tubing and reinforcing mesh it is attached to gets lifted into the thickness of the slab as the concrete is placed. Other times the masons trample over the tubing and mesh as if it is not even there.

DOES TUBING DEPTH MATTER? Unlike relocating a sensor or unsweating a pipe, there is no chance of changing tubing depth once that screed slides over the concrete. The slab’s performance over decades of future service life is now fixed. The irreversibility of the situation should give us pause to consider if we are installing the tubing in the best manner possible. If the tubing depth does not have much of an effect on performance, why worry about it? However, if tubing depth does significantly affect performance why be ignorant of it? Why sacrifice performance to a detail that adds very little, if anything, to the installation cost?

There are several ways that tubing depth should affect the performance of a heated slab: • The deeper the tubing, the greater the thermal resistance between it and the floor surface. The higher the thermal resistance in the path of heat flow, the higher the water temperature must be to achieve and maintain a given rate of heat transfer.

• The closer the tubing is to the bottom of the slab the greater the underside heat losses should be.

• When the tubing ends up near the bottom of the slab more of the slab’s thermal mass is above the horizontal plane at which heat is being added. This increases the time required to warm the floor surface to normal operating temperatures following a call for heat. It also lengthens the cool down time after heat input is interrupted by system controls.

A fully “charged” slab can hold several hours worth of heat that will continue to flow into the space as long as the air temperature and/or interior surface temperatures are cooler than the floor surface. This can be a real problem in buildings with significant internal heat gains from sunlight or other sources.

34

HPAC | OCTOBER 2015

Considering these facts, it seems intuitive that placing the tubing higher in the slab will improve its performance.

The harder questions to answer are: 1. How much is performance affected by tubing depth?

2. Is the change in performance worth the necessary jobsite oversight to ensure it happens?

NUMBER CRUNCHING The answers to these questions require credible numbers.

One way to get them is through specialized software known as finite element analysis (FEA). This software allows a physical situation to be mathematically modeled and simulated. The calculations FEA software can do in a couple of seconds are far beyond what any person could attempt to solve through manual methods.

One of the FEA models I constructed is shown in Figure 1.

It consists of a four-inch concrete slab sitting on one-inch thick extruded polystyrene insulation (R-5 ºF•hr•ft2/Btu), and covered by 3/8 in. oak flooring. The latter is assumed to be perfectly bonded to the top of the slab. The tubing is assumed to be spaced 12 in. apart.

Several versions of this model were used to simulate tubing at different depths in the slab. Each time the model was run it determined the temperature at hundreds of points within a small region of the slab including points spaced 1/2 in. apart along the floor surface.

HPACMAG.COM

tubing at botton of slab

Figure 3

15 Btu/hr/ft2 30 Btu/hr/ft2

Average circuit water temperature (ºF) with tubing at ½ slab pth 95F 120F

Average circuit water temperature (ºF) with tubing at bottom of slab 102F 134F

These results imply that the average water temperature in the circuit has to increase about 7F to yield an output of 2 15 Btu/hr/ft if the tubing is located at the bottom of the slab. The average water temperature in the circuit must be 2 about 14F higher to yield an output of 30 Btu/hr/ft with the tubing at the bottom of the slab.

Can the system’s heat source provide the higher water temperatures required by the deeper tubing? If that heat source is a conventional boiler, this change in water temperature would likely have a very small (but none-the-less undesirable) effect on boiler efficiency. However, if the heat source was a condensing boiler, solar thermal collector array or heat pump, this change in required water temperature would have a more pronounced negative effect on efficiency, as well as the heat gathering ability of the solar collectors or heat pump. Higher water temperatures in the tubing also mean reduced capacity through mixing devices, higher piping heat loss and higher underslab losses, all of which are undesirable.

BARE SLAB SIMULATIONS

25 23

I also wanted to see how tubing depth effects heat output for 21 uncovered concrete slabs. The FEA model was easily modified 19 to turn the 3/8 in. oak flooring into 3/8 in.Heat thick concrete and the output based on 1/2" PEX tubes ! spaced 12" o.c.in 4" thick !

17 bare concrete slab! output at simulations were rerun. The results for upward heat operating at 100 ºF water temp.

15 a water temperature of 100F are shown in Figure 4.

0

0.5

1

1.5

2

2.5

3

3.5

4

Depth of tube (center) below surface (inches)

Figure 4 25 23

tube center @ 0.75" depth

21 19

tube center @ 2" depth

Heat output based on 1/2" PEX tubes ! spaced 12" o.c.in 4" thick ! bare concrete slab! operating at 100 ºF water temp.

17 15

tube center @ 3.8" depth

0

0.5

1

1.5

2

2.5

3

3.5

4

Depth of tube (center) below surface (inches) HPACMAG.COM

isotherm

tubing subgrade

Figure 2 shows the isotherms (e.g., line of constant temperature within the slab and surrounding materials) that are generated by the FEA software.

When the FEA model was run for several tubing depths the following trends were observed as the tubing is placed deeper in the slab: 1. The floor surface temperature directly above the tube decreases due to the greater R-value between the tube and the surface.

2. The difference between the floor surface temperature directly over the tube and that half way between adjacent tubes decreases. This is a desirable effect because it makes the floor surface temperature more “homogenous.”

3.

The area under the surface temperature profile curve changes with tube depth. This implies that the upward heat output from the floor changes as tubing depth changes.

Using the temperature data from several simulations, I estimated the heat output from the system for water temperatures of 100F and 130F. In each case, heat output increases as the tubing is lowered through the upper portion of the slab and decreases as the tubing gets deeper. This implies that there is an optimal tube depth where the slab delivers maximum heat output. The simulations I ran suggest it is about ¼ of the slab thickness down from the slab surface. However, this depth could vary depending on flooring resistance and other factors.

I also used the FEA results to determine the average water temperatures required to deliver heat outputs of 15 and 2 30 Btu/hr/ft . The results are shown in Figure 3.

Upward heat output

underslab insulation

tubing (at different depths)

Upward heat output (Btu / hr / sq. ft.)

subgrade

Upward heat output (Btu / hr / sq. ft.)

underslab insulation

half way to adjacent tube

tubing at center of slab

half way to adjacent tube

concrete slab

heat flow is always perpendicular to isotherms concrete slab finish flooring

Figure 2

finish flooring (3/8" hardwood bonded to slab)

half way to adjacent tube

half way to adjacent tube

Figure 1

continued on p36

OCTOBER 2015 | HPAC

35

< HYDRONICS continued from 35 The results again show that heat output decreases as the tubing is placed lower in the slab. The highest output for the simulations I ran occurs when the tube is centered about ¾ in.

2 below the slab surface (about 25.1 Btu/hr/ft at 100F water temperature). Lowering the tube so that its centre is two inches below the slab surface (e.g., tubing centred on four2 inch slab thickness) reduces output to 23.8 Btu/hr/ft . These changes are relatively small. However, look at what the simulation predicts when the tube is located at the bottom of the 2 slab. Here the output is only 17.8 Btu/hr/ft . That is a 25 per cent decrease in upward heat output compared to when the tubing is centred in the slab’s thickness. The only way to compensate for this would be to increase water temperature several degrees Fahrenheit.

I also looked at downward heat loss as a function of tubing depth. When water temperatures are adjusted (as shown in Figure 3) to allow tubing placed at the bottom of the slab to produce the same upward heat output as tubing centred in the slab, downward heat loss increases by about 10 per cent.

OTHER CONSIDERATIONS There are factors other than thermal performance that have a bearing on tubing depth within a slab. One of them is protecting the tubing near sawn control joints. The depth of

Figure 5

sawn control joint crack forms here

WWF reinforcing wire mat

polyethylene sleeving tubing

tamped fill 6-mil poly moisture barrier underside insulation

leave tubing and WWF at bottom of slab under control joint locations

such saw cuts is typically 20 per cent of the slab thickness. I prefer to keep the tubing near the bottom of the slab at such locations to give the blade a wide berth as it passes over. A typical detail is shown in Figure 5.

Another consideration is penetrations by fasteners used to secure equipment to the slab. In most cases it does not make sense to leave all the tubing at the bottom of the slab just to accommodate what might be a future bench or lift post. Find out where such equipment will be placed and keep the tubing several inches away from where the continued on p38

It’s Your Business.

Make Sure your Boiler Partner’s Solutions Work for You. As a Contractor you can count on what gives Aqua-Tech its energy.

For 35 years Aqua-Tech, established by Founder Bill Palamar, has provided a product portfolio that delivers unmatched quality, performance and application flexibility. Solutions for residential and commercial needs.

Whether you require a gas, integrated domestic hot water system or hydronic boiler solution Aqua-Tech can deliver. From an energy efficient qualifying solution to On-time delivery…each is critically important.

With such solid solutions, who better to be your bridge to success?

Call us today.

Your Bridge to Success.

36

HPAC | OCTOBER 2015

Aqua-Tech Sales and Marketing Inc. 4390 Paletta Court, Unit M, Burlington, ON L 7L 5R2 P: 905.631.5815 F: 905.637.8655 www.aquatech-canada.com

HPACMAG.COM

Z-one™Relay Series • • • • • •

Single zone pump relay control Multi-zone 3, 4, and 6 pump control Multi-zone 3, 4, and 6 zone valve control Unlimited zone expansion standard Compatible with 2, 3, and 4 wire thermostats Selectable priority, post purge and exercise

5

• • • • •

Dry contacts for DHW, T T, ZONE 1 & AUX capable of switching high voltage Large terminal connections simplifies wiring Front bright LED function lights Heavy duty relays, fuse protected 100% Factory tested, ETL Approved

ZVR - Z-one™ valve relays have a three year warranty and Z-one™ zone valves have a two year warranty. When installed together, both qualify for our industry exclusive installed together five year warranty.

Z-one™ valve & relay installed together

Components for today's modern hydronic systems

Heating & Cooling www.caleffi.com - Milwaukee, WI USA

< FEATURE continued from 36 fasteners are likely to go. Block out and note these areas on your tubing layout drawing. Be sure to leave a copy of this plan with the building owner.

WHAT DOES THIS MEAN? Is finite element analysis guaranteed to predict reality with 100 per cent accuracy? No. There are hundreds of possible variations on factors such as soil temperature, flooring resistance, tube spacing and so on, that make it hard to draw generalized conclusions based on a few simulations.

Still, for the limited simulations I ran, the predicted upward heat outputs agreed fairly well with other sizing tools used for system design. The predicted increase in water temperature required for tubing at the bottom (rather than the centre) of the slab is both believable and significant.

The 10 per cent increase in downward heat loss caused by higher water temperatures in bottomed-out tubing also seems reasonable.

Keep in mind that these results are also based on steadystate conditions. They do not predict the consequences of the longer response times associated with deeper tubing.

In buildings with significant and often unpredictable internal heat gains, this longer reaction time will surely lead to wider temperature swings and compromised comfort.

Considering all these tradeoffs perhaps it is time we all find better ways of ensuring that tubing and reinforcing mesh end up near the mid-height of the slab, (except under any sawn control joints).

For products such as “knobby” foam panels, or plastic staples that clamp PEX directly to the underslab insulation, manufacturers should provide accurate thermal performance data that accounts for this tubing placement.

Be sure to make your requirements clear within plans and specifications. It is also worth having a discussion of these requirements with the “accountable” person overseeing the concrete crew. Make sure they know that tubing depth does affect system performance. Do this several days before the pour, not while the first concrete truck is backing down the driveway, so there is no excuse for being unprepared.

John Siegenthaler, P.E., is a mechanical engineering graduate of Rensselaer Polytechnic Institute and a licensed professional engineer.

He has over 34 years experience in designing modern hydronic heating systems. He is also an associate professor emeritus of engineering technology at Mohawk Valley Community College in Utica, NY.

CHEMICAL SINCE 1981

Established in 1981, Hood Chemical supplies Dow Chemical glycol (propylene and ethylene) with inhibitors. We offer free analysis and supply a written report advising the freezing point, pH, concentration of inhibitors, and appearance.

“Who’s Your Glycol Expert”?

Contact Us for our Full List of Products and Services

1-800-567-9791

www.HOODchemical.com

HiTech Dispensing Inc. 38

HPAC | OCTOBER 2015

HPACMAG.COM

Maximum VITALITY

with fire tube heat exchanger

Maximum VALUE

with premium features

Maximum VERSATILITY

with easy installation and service

Built-in Pump AFUE

Built-in Indirect

ntiboilers.com

HYDRONIC PRODUCTS Tamas Hydronic’s standard boiler

Use the Hydro-Core boiler

panel features a compact design and

compatibility matrix to find

is available in configurations of up to

the right Hydro-Core kit for a

five zones, not including boiler pump.

specific boiler and save in-

It can mount horizontally or vertical-

stallation time. It is de-

ly depending on the requirements of

signed specifically for hy-

the installation and customer prefer-

draulic

ence. The panel is suited to retrofit

isolation and purging the

applications where space is limited,

near boiler piping or second-

Uponor is extending its current

as well as new installs.

ary circuit loops.

pre-insulated cross-linked polyeth-

www.tamashydronic.com

www.webstonevalves.com

ylene (PEX) pipe offering to include

separation,

pump

insulation thicknesses up to 2 in. to comply with the ASHRAE 90.1Weil-McLain has an enhanced line of SlimFit high-effi-

2013 Energy Code and the 2012

ciency condensing gas boilers. They feature improved

International Energy Conservation

boiler-to-boiler communication, Modbus and BACnet, ex-

Code (IECC). The new offering in-

press set-up wizard, 10 pre-set typical heating systems

cludes both Uponor AquaPEX pipe

and updated controls for simpler navigation. Durable and

for potable plumbing applications,

reliable, SlimFit boilers come factory assembled. They

as well as Wirsbo hePEX oxygen-

have 96.1 per cent combustion efficiency and 95.8 per

barrier pipe for hydronic heating

cent thermal efficiency.

and cooling applications.

www.weil-mclain.com

www.uponor.com

All Laars commercial NeoTherm boilers now come

Caleffi’s 553 Series pre-adjustable AutoFill fill valve is avail-

with a large colour touch screen. The screen al-

able with an optional pressure indicator. AutoFill is used

lows quick access to the control’s full functional-

on closed-loop hydronic systems to automatically fast fill

ity. A variable speed boiler pump control option,

and maintain system pressure. It can be pre-set to

Vari-Prime, is also available. The fully packaged, 95

the required pressure value before charging the sys-

per cent efficient NeoTherm line is available from

tem. The valve fast fills and stops automatically

285 through 1200 MBH sizes. It is a direct vent,

when the set pressure is reached. There is no lever to flip or

sealed combustion system that modulates with a

valves to close. A pressure indicator is mounted after the built-in check

five to one turndown.

valve, which allows for visual monitoring of the system pressure.

www.Laars.com

www.caleffi.com

Best of Siggy – Canadian style!

JOHN

THE BEST OF

SIEGENTHALER MODERN HYDRONICS

PART II

SEPTEMBER 2015

40

EXCLUSIVELY IN CANADA

HPAC | OCTOBER 2015

Order your Best of John Siegenthaler II CD while supplies last.

Own John’s hand-picked favourite HPAC articles from the last 10 years. The CD also contains information on a variety of current hydronic products and links to their manufacturers’ websites.

There is a limited supply so don’t delay – order today!

Only $19.95 plus tax (includes postage) To place your order visit www.hpacmag.com/bestofsiggy/ HPACMAG.COM

A better way to make ends meet.

Professionals who specify and install Uponor PEX plumbing and hydronic piping report faster installation times, savings on materials costs, fewer callbacks and greater peace of mind.

Exceptional products, tools and support. Uponor. Tested in the lab and proven in the field.

Connect with Uponor.

Connect with confidence.

See more case studies at www.uponor.ca

PEX PLUMBING RADIANT HEATING & COOLING HYDRONIC PIPING PRE-INSULATED PIPING

< HEATING

Understanding and measuring energy transfer

It is crucial to calculate the load when designing a heating system. BY GILLES LEGAULT

T

o design an energy efficient and comfortable heating system, it is important to understand and measure the energy transfer. In short, we have to replace the energy leaking through walls, ceilings, floors and openings in the building envelop. Since the energy always seeks a balance, it will move from a high-temperature area to a lowtemperature area. This transfer will occur by conduction, convection or radiation.

If the energy input exceeds or does not meet the system’s energy loss, its efficiency will decrease, as will the comfort (and satisfaction) of the occupants. We must calculate the amount of energy that will find its way through the energy shell using the following formula: Q = A (k/x) (∆T) where: Q = heat transfer rate through a given material k = conductivity of the material (Btu/F∙hr∙ft) x = material thickness ∆ T = temperature differential on both sides of the material (˚F) A = surface of the material (sq. ft.)

POINTS TO CONSIDER These calculations are essential when designing a heating system to ensure it will not be over or undersized, which means it will be efficient and will provide room comfort. In addition, these calculations are required by the CSA B214 standard, which has been part of the National Building Code since 2010. The 4.6.2 (a) point of the standard says that the design load heating calculation – in kWh (Btuh) – must be performed in each single room.

For contractors who say that they do not have time to perform load calculations, there is great software available, some of which use the CSA F280 Standard Form Heat Loss Gain Calculation standard.

Think about it. How can we determine the supply temperature and the required flow rate of each zone if we do not know what the load is? While some contractors choose the oversizing “strategy” to avoid complaints, the lack of comfort and excessive operating costs would generate even more unpleasant and expensive complaints, not to mention the damage to your business’s reputation.

42

HPAC | OCTOBER 2015

Heating system design should take into account the replacement of the energy leaking through walls, ceilings, floors and openings in the building envelop.

We should also be aware that identical house projects, such as those we saw in the 1970s, no longer exist. Thus, the heating/cooling system design of a particular house does not apply to the design of another similar (in appearance) house. Today, every home is different and the slightest change in the building envelope and occupant behaviour can make a big difference in its heating load.

ROOM-BY-ROOM EVALUATION Why does CSA B214 require room-by-room load calculations?

Just as the load of each house is different, so is the load of each room. For example, consider a one-storey slab on grade house with two identical 100 sq. ft. bedrooms. One of these rooms has two outer walls, while the other one has only one.

Assuming that the thermal resistance is: R20 walls, R40 ceilings, R10 slab, and that each room has a 4 ft. x 4 ft. window, the room with two outer walls will need 27 Btuh/sq. ft. while the one with one outer wall will only need 20 Btuh/sq. ft.

If the contractor has chosen the 25 Btuh rule of the thumb value, it is easy to figure out that the heating system for one room will be undersized and the other one will be oversized. In both cases the customer will not be happy.

There is no good reason to undertake the installation of any type of heating system without a prior calculation of energy loss. These calculations ensure our customers will be comfortable and happy. In addition, they allow us to meet CSA B214 and comply with the National Building Code.

Gilles Legault is a certified hydronic designer. He is a technical consultant at Agence Jacques Desjardins Inc. and is on the CIPH – Quebec Chapter board of directors. He is a regular contributor to Plomberie, Chauffage & Climatisation (PCC). Readers can reach him at gilles.legault@agencedesjardins.com.

HPACMAG.COM

THIS SEASON, USE ENERGY WISELY.

THE MASTER GROUP CARRIES THE LEADING BRANDS IN GAS HEATING TECHNOLOGY AND EFFICIENCY.

TANKLESS WATER HEATERS

GAS-FIRED UNITS

CONDENSING BOILERS

24 BRANCHES SERVING ONTARIO, QUEBEC AND THE ATLANTIC PROVINCES

& MORE THAN 800 PRODUCT LINES IN INVENTORY

Master in comfort. Expert in top brands.

Visit us at master.ca.

< MEETING WRAP UP Contractor appointed chair of HRAI Peter Steffes of Ideal Heating and Cooling in Windsor, ON was appointed chair of the Heating, Refrigeration and Air Conditioning Institute of Canada (HRAI) at the association’s 47th annual meeting held in Windsor, ON, August 26 - 28, 2015.

Steffes has served on the HRAI Board since 2012 as a representative of the contractors division. He has also served on the contractors division board since 2004 and as chair of the division from 2013 to 2015.

HRAI’s 2016 AGM will be held August 24 to 26 in Calgary, AB. www.hrai.ca

An interactive panel session, The HVAC/R Supply Chain, included wholesalers, manufacturers and contractors with questions delivered by media representatives. From left, Gerry Cellucci, Yorkland Controls; Ryan Garrah, Emerson Climate Technologies Canada; Adam Wells, Rheem Canada Ltd.; Roger Grochmal, AtlasCare; Joe Muchynski, Arvin Air Systems; and Peter Sung, ECCO Supply.

C

M

Y

CM

MY

Jim Flowers presents the Merit Award to David Morden, Morden National Sales & Marketing Inc.

CY

CMY

K

HRAI President’s Recognition Award went to Bea Olivastri of Friends of the Earth. Olivastri has been on the RMC board of directors for 14 years.

Jim Flowers of Linde Canada passes the gavel to Peter Steffes, 2015/2016 HRAI incoming chair.

A familiar face to many, John Murphy came prepared with his Life Member Award acceptance speech in hand. Murphy, formerly of J.E. Murphy Heating and Cooling, received the Craig McCarty Memorial Award in 2011 for his longstanding dedication to HRAI’s contractors division and the HVAC/R industry.

HRAI Award Recipients • Merit Award, David Morden, Morden National Sales & Marketing Inc. • Merit Award, Ron Wright, Enertech Global • HRAI Life Member Award, John Murphy • HRAI President’s Recognition Award, Environment Canada • HRAI President’s Recognition Award, Bea Olivastri, Friends of the Earth 44

HPAC | OCTOBER 2015

HPACMAG.COM

< MEETING WRAP UP

Oil heat professionals tackle tough issues

A

ttendance numbers were up for the 2015 CleanerHeat Symposium, which was held at the Halifax Marriott Harbourfront Hotel in June. Code concerns, the labour market, market share and insurance were top of mind at the event. Close to 200 attendees took in the full speaker program, along with social events at the two-day Canadian Oil Heat Association conference.

Session speakers included: Sylvain Villeneuve, of Vilco Ltd. and Superior Tanks Ltd.; Bill Fligg, of Petro Buster Inc.; Matthew Gardner, of Wilms and Shier Environmental Lawyers LLP; Paul Rew, of Rubicon Environmental Inc.; Paul Seager, of HH Angus and Associates Ltd.; COHA president Stephen Koch; Michael Lio, of BuildABILITY Corporation; and Don Huff, of Environmental Communications Options.

At the manufacturers roundtable, participants from Riello, RW Beckett, Granby Steel Tanks, Roth and Vilco discussed how to improve the public’s perception of the oil heat industry and make headway in the new home market.

Oil equipment capacity was identified as a major concern.

“Houses are a lot better insulated. This leads us to a point where heat loss is very low,” said Michel Beaulieu, vice president sales, Canada, Roth Industries. “In the future we’ll have

to have more efficient heating equipment and smaller capacity,” emphasized Beaulieu. He referred to CSA F280 and noted that residential heat loss has been halved.

Panelists agreed that there is a lot of old, inefficient oil equipment out there. “We get Bernie Jackson, faculty member, heating, refrigeration and calls from contractors looking air conditioning technician for burner parts from 20 years program at Humber College, ago and more,” said Kevin Bond, reported that the school has to turn students away from its president, Riello Canada. “Why two-year OBT3 program. are they fixing that appliance?”

There is shared responsibility for the issues around selling new, more efficient equipment, much of which was on display at the symposium trade show.

“There’s responsibility all the way along the supply channel, including the homeowner,” said Jonathan Beckett, vice president of sales and marketing with R.W. Beckett.

The 2016 conference will be held in Charlottetown, PE, at the Delta Prince Edward, from June 7 to 9. www.coha.ca

F1 Multi HVAC Quarter page ad (4C HPAC)_Layout 1 2014-Feb-18 2:49 PM

swedish innovation

AB VE ALL THE REST Ontor Limited

12 Leswyn Road Toronto, ON M6A 1K3 Tel: (416) 781-5286 Fax: (416) 781-7680 www.ontor.com

46

HPAC | OCTOBER 2015

HPACMAG.COM

VINCENTRIC LOWEST FLEET COST TO OWN

VINCENTRIC BEST

2015

2015

IN CANADA

FLEET VALUE

IN CANADA

MAKE LIGHT WORK OF EVERY TOW. WITH ITS BEST-IN-CLASS TOWING* AND DIESEL HORSEPOWER,** AND 860 LB.-FT. OF STANDARD DIESEL TORQUE, SUPER DUTY MAKES EVEN THE TOUGHEST JOBS SEEM EASY. NO WONDER F-SERIES IS CANADA’S BEST-SELLING WORK TRUCK 49 YEARS STRAIGHT,† AND THE TRUCK CANADIANS TRUST TO GET THE JOB DONE. BEST-IN-CLASS: 31,200 LBS. TOWING *| 440 HORSEPOWER ** | FUEL EFFICIENCY ‡

FORD.CA

Vehicle may be shown with optional features. *With F-450, when properly equipp equipped. Class is Full-Size Pickups over 8,500 lbs. GVWR vs 2015 competitors. **440 HP with 6.7L V8 Diesel. Class is Full-Size pickups over 8,500 lbs. GVWR vs 2015 competitors. †F-Series is the best-selling pickup truck in Canada for 49 years in a row based on CCanadian Vehicle Manufacturers’ Association statistical sales report up to 2014 year end and YTD May 2015. ^860 LB.-FT. of torque with 6.7L V8 Diesel. Class is Full-Size pickups over 8,500 lbs. GVWR vs 2015 competitors. ‡The 2016 Super Duty with 6.7L Power Stroke diesel has best-in-class fuel consumption. Class is Full-Size Pickups over 3 856 kg (8 500 lbs) GVWR. Diesel fuel efficiency claim based on Ford -simulated city-suburban drive-cycle tests of comparably equipped 2016 Ford and 2015 competitive models, consistent with SAE Standard J1321. Actual fuel consumption will vary. ©2015 Ford Motor Company of Canada, Limited. All rights reserved.

Based on the Vincentric 2015 Canadian Fleet awards analysis, Full-Size Heavy Duty ¾-Ton Pickup and Full-Size Heavy Duty 1-Ton Pickup segments and the F-250 Super Duty XL Reg Cab 2WD and F-350 Super Duty XL Reg Cab SRW 2WD.

< MEETING WRAP UP

Martin Deschênes presents a congratulatory speech on behalf of his father Jacques, in recognition of Claude Lesage of Giant Factories Inc. receiving an honorary life member award.

Claude Lesage (c), with his wife Lise by his side, accepts CIPH’s honorary life member award from Paul McDonald.

Historic city a fitting contrast to a progressive business conference

T

he Canadian Institute of Plumbing & Heating held its 2015 Annual Business Conference in mid-June in historic Quebec City. Themed “Innovation – Integration – Motivation”, the conference attracted more than 250 delegates and companions, with 47 of those being new delegates. Manufacturing and wholesaler distribution executives were treated to an impressive speaker roster.

David Mendel, who is president of Mendel Tours, provided a fascinating report on the history of Quebec City.

Shifting to a forward thinking perspective, innovation specialist Dirk Beveridge of 4th Generation Systems presented “How Successful Distributors Lead Change In Disruptive Times.” He identified generational changes, disruptive technologies, new competition and shifting business models as threats to creating a relevant or sustainable business.

Sustainable building design specialist Ronald Gagnon following the CHC luncheon with CHC chair Mike Miller of Taco (r).

48

HPAC | OCTOBER 2015

Beveridge had a cautionary statement for an industry that values, and relies on its business relationships.

“Many of us have built our businesses on relationships–younger people aren’t interested in that,” said Beveridge.

Relevance in today’s business environment was a theme carried on by Emmy winning comedian, writer and television host, Ross Shafer who addressed leadership and leadership qualities. Darrell Bricker and John Wright of Ipsos presented the requisite statistics session.

For the hydronics enthusiasts, Ronald Gagnon presented case studies of high efficiency buildings using modern radiant technology at the Canadian Hydronics Council (CHC) luncheon. His presentation explored the ins and outs of energy efficient techniques, from small-scale applications in Net Zero homes, to larger scale industrial installations. In addition to describing the design and technology, Gagnon examined thermal mass storage and how it can help reduce system size and reduce budgets. In closing, he talked about how radiant systems can help achieve LEED certification.

ABC 2016 will be held at the Fairmont Banff Springs, June 26 to 28 in Banff, AB. www.ciph.com

Siân Smith, incoming CIPH chair with CIPH immediate past chair Paul McDonald of Bradford White.

Noble exec at the helm of CIPH Siân Smith, senior director of strategic procurement with Noble Corporation in Concord, ON, is the 2015/2016 chair of the Canadian Institute of Plumbing & Heating (CIPH). The announcement was made at the 83rd annual general meeting in Quebec City. The youngest chair in the organization’s history, Smith is also the first woman to hold the position.

She began her career in the plumbing and heating industry with Emco Corporation in 1999. In 2007, Smith was named vice president, procurement. She joined Noble, which had been acquired by the Talisker Plumbing Corporation, a subsidiary of Emco Ltd., in her current role in 2013. Smith was elected to the CIPH board in 2009.

HPACMAG.COM

EVENTS >

Winners all around at Modern Hydronics -Summit 2015

A sell out crowd enjoyed a robust speaker program and a host of hydronics products at HPAC’s September 10th flagship event.

C

lose to 400 people, including exhibitors, delegates and speakers, headed to the International Centre in Mississauga, ON on September 10 to be immersed in hydronics at Modern Hydronics-Summit 2015. In addition to the change in venue for the event, sessions were consecutive so attendees were able to take in all of the speakers, and have time to check out the more than 50 hydronics exhibitors.

Robert Bean and John Siegenthaler opened the show with their take on the top 10 trends in hydronics. Always entertaining and insightful, Siggy & the Bean was a filled-to-capacity event.

You have heard of BTU metering but what is it and what does it mean to your hydronics business? Mark Evans explained all that and more in his session BTU metering–Canada’s future opportunities for the downstream measurement of energy consumption at point-of-use.

An afternoon panel session titled Hydronics Training and Certification: Where do we go from here?, had representatives from the Ontario College of Trades (OCOT), industry associations and other stakeholders. Bob Onyschuk and Royden Trainor of OCOT, Martin Luymes of HRAI, David Graeme of Belyea Bros. and Mike Wills, Canadian Hydronics Council Ontario Region chair, discussed where their organizations are at in terms continued on p50 HPACMAG.COM

In the show’s opening session, John Siegenthaler (l) and Robert Bean shared their perspectives on trends in the hydronics industry.

Mike Miller (l) of Taco and Steve Goldie of NEXT led an engaging session on reducing distribution piping.

The customer is always right – well not always but contractors have to learn to create high performing buildings within that framework said Robert Bean in his Summit presentation.

Mark Evans of Viega explains BTU metering and what it will mean to the mechanical contracting industry in terms of opportunities and threats.

John Siegenthaler (l) presented Rob Carmichael with a Bacharach Portable Combustion Analyzer.

The DeWalt 20V MAX Lithium Ion Reciprocating Saw was won by Brendon Aldridge, shown here with Robert Bean(l).

Keep it simple was the theme of John Siegenthaler’s keynote address, which wrapped up the speaker portion of the Summit.

OCTOBER 2015 | HPAC

49

< EVENTS continued from 49

Hydronics Training and Certification: Where do we go from here? panelists from left to right: David Graeme, Belyea Bros. Limited, panel moderator Mark Evans of Viega, Bob Onyschuk, Ontario College of Trades, Royden Trainor, Ontario College of Trades, Martin Luymes, HRAI and Mike Wills, chair, Ontario Region-Canadian Hydronics Council.

50

HPAC | OCTOBER 2015

of resolving who should do hydronics, and what training is required.

Your favourite hydronics problem solvers, Mike Miller and Steve Goldie took an in-depth look at distribution piping.

The message delivered by Miller and Goldie was that smart design can save you time and labour, and deliver a top of the line system to the customer. The entertaining presentation showed delegates how to make that happen.

Balancing the needs and wants of your customer with good building practices is always a challenge. Achieving high performance when under high pressure from clients is possible and Robert Beanâ&#x20AC;&#x2122;s session: An Integrated Hybrid System for the Great Lakes Region, demonstrated this.

John Siegenthaler wrapped up the speaker portion of Modern HydronicsSummit 2015 with Simplifying Hydronic Systems Without Sacrificing Performance.

As Siegenthaler said, why build the space shuttle when our clients need a Cessna?

Contractors and installers attending the session learned how they can ensure that consumers view hydronic heating as an affordable, efficient and understandable technology; something that they want in their home or place of business.

By all accounts Modern HydronicsSummit 2015 was a hit, particularly for Rob Carmichael, a technician with Brayâ&#x20AC;&#x2122;s Fuels Limited of Newmarket and Brendon Aldridge, owner of Dr. HVAC Ltd. in Brampton, ON. Carmichael and Aldridge were the lucky winners of the tool draws during the event.

Modern Hydronics Autumn 2015 at www.hpacmag.com features many of the presentations. Summit attendees can view the presentations at www.modernhydronicssummit.com.

HPACMAG.COM

Thanks to everyone who attended Modern Hydronics â&#x20AC;&#x201C; Summit 2015

John Siegenthaler

Robert Bean

Steve Goldie

Mike Miller

See you in 2017!

Mark Evans

MECHANICAL SUPPLY NEWS MANUFACTURERS • DISTRIBUTORS • WHOLESALERS

CANADIAN RECEIVES THE DISTINGUISHED SERVICE AWARD At the 2015 ASHRAE annual conference in Atlanta, GA, Norm Grusnick, P. Eng., commercial sales manager at Tom Phoenix, ASHRAE presiECCO Supply Burnaby, BC, dent, presents the DSA to was awarded the Distinguished Norm Grusnick of ECCO Supply.

Service Award. Grusnick has been a member of ASHRAE for over 25 years and is a member of several ASHRAE technical committees, including the TC 5.2 Duct Design committee.

Distinguished Service Awards are given to individuals who meet 15 service points and demonstrate faithful service to the Society and hold distinction on committees.

Grusnick, who has worked for ECCO Supply for 22 years, joins two other Canadians who have received this award.

He earned his engineering degree in 1980 and is a professional engineer registered in British Columbia. www.eccosupply.ca

THE MASTER GROUP EXPANDS ONTARIO OPERATIONS WITH HYDRONICS GROUP ACQUISITION The Master Group Inc. has completed the acquisition of The Hydronics Group Inc., an Ontario distributor of heating parts and equipment. Tim Rickards, co-founder of The Hydronics Group, will remain in position and his role will be to facilitate the transition and to share his knowledge, especially in the field of hydronic heating, with customers and all employees as a technical sales representative.

Rob Moroney, also co-founder, will continue on independent projects in the distribution of radiant heating equipments.

The Master Group now has over 580 employees in over 25 branches, three sales offices and three distribution centres spanning from Ontario to the Atlantic Provinces. www.master.ca

WATTS WATER FAMILY OFFERS RESIDENTIAL SOLUTIONS BROCHURE Watts Water recently released a 12-page brochure showcasing a family of plumbing, heating and water quality products for residential applications. The brochure divides the family into five categories – potable, The cover of HVAC, fire protection, drainage and water the 12-page brochure quality and conditioning products.

52

HPAC | OCTOBER 2015

The brochure discusses solutions for transforming a multifamily dwelling into a safe and efficient building. The solutions are given by five Watts Water Technologies companies.

In other company news, Watts rang the closing bell at the New York Stock Exchange on September 16, 2015. The company is celebrating its 20th year of listing on the Exchange, and over 140 years in business. Craig Kissel, chairman of the board, joined Robert Pagano, president and chief executive officer, and Todd Trapp, chief financial officer, for the celebration.

Watts Water Technologies was founded in 1874 and began as a small machine shop, supplying parts to the New England textile mills. www.wattswater.com

WARD HEATING TO REP CROWN BOILER Crown Boiler products has named Ward Heating Products its Canadian distributor.

“Crown Boilers is an established company with significant stock that will allow us to provide exceptional service and quick delivery,” Tom and Matt Ward, owners of Ward Heating Products, explained in a news release about this partnership.

Ward Heating Products is located in Ariss, ON. www.wardheating.com

VICTAULIC AND BERMAD JOIN TOGETHER Victaulic, mechanical pipe-joining and fire protection systems The Victaulic and Bermad combined logo manufacturer, has joined businesses with Bermad, a global producer of hydraulic water and air valve technologies.

This partnership, entitled Victaulic Bermad Technologies (VBT), will be based out of Houston, TX. VBT will specialize on select markets and applications, including fire protection, and expand the Victaulic valve and device market in both Canadian and U.S. regions.

“The goal of this initiative is to not only expand Victaulic’s existing valve and device offering in the commercial fire protection space, but to also create new system solution opportunities for the industry,” said Bob Freidl, vice president of sales and market development. www.victaulic.com

UNICO’S ISERIES OFFERING MORE THAN JUST HEAT Unico’s new heat pump, the iSeries outdoor unit with inverter continued on p53 HPACMAG.COM

AdrianSteel.com

< MSN continued from 52 technology, now comes with an added bonus; the manufacturer will send Canadian and U.S. contractors a $500 cheque for every unit they sell between the dates of August 1 and December 31 of this year. This offer is available for both residential and commercial applications.

The iSeries, which was introduced in 2014 by Unico, is suited to custom homes and retrofits. www.unicosystem.com

tools used at the build were donated to Habitat GTA. Habitat for Humanity GTA’s Adopt-a-Day Program is an employee engagement experience with a 28-year-history of helping companies build stronger teams and offers a neat way to give back to the community. Habitat GTA serves the areas of Brampton, Caledon, Toronto and York Region. www.stanleyblackanddecker.com

CANADIANS QUICK TO JOIN T&S ONLINE TRAINING PROGRAM

RAVEN SUPPLY AND ROOM TO READ PARTNER AGAIN

T&S Brass and Bronze Works has launched a revamped and updated online training program for representatives, dealers, wholesalers and consultants. The first T&S University launched in 2003, however the company decided a complete overhaul was needed due to technological advancements.

The latest program is user-friendly, interactive and can be used on both tablet devices and desktop computers.

Joan Taylor, T&S corporate training manager, says that TSU2 went live in September, and by mid month there were already 10 Canadian customers and reps signed up. She says that T&S has just lined up several new, robust rep firms in Canada and she expects a significant number of registrants in the coming months. www.tsu.tsbrass.com

In May, HPAC magazine spoke with Ashley Bouchard, Raven Hydronic Supply Ltd.’s project manager, about the completion of a year-long building initiative The Raven Team proudly handing over the check in Palpa Nepal. Raven Supply to make the repairs on a worked with Room to Read, an eight room school house in Nepal effected by the recent organization dedicated to enearthquakes. Left to right abling worldwide education, to : Sharon Davis of Room to build Shree Madan Asrit Lower Read. Nic Sun, Bennett Lee, Bal Munday, Kimberley Secondary School. However, af- Waller, Ashley Bouchard. ter the earthquake that struck Nepal on April 25, 2015, the state of the school was unknown to the magazine.

Bouchard recently told HPAC magazine that the damage in Palpa was very minimal and that she is confident that the school was not damaged.

Following the earthquakes, Raven Supply has again partnered with Room to Read and is donating its services and funding to repair five classrooms with major damages and three classrooms with minor damages in the Nuwakot province in Nepal. The total cost for this project is $30 042. www.ravensupply.ca

Joe Di Ilio, president, Stanley Black & Decker Canada (centre left) and Liz Etsell (centre right), volunteer site coordinator for Habitat for Humanity GTA, with the DeWalt participants in the Habitat for Humanity Adopt-a-Day Challenge GTA.

STANLEY BLACK & DECKER TEAMS UP WITH HABITAT FOR HUMANITY Stanley Black & Decker (SBD) joined forces with Habitat for Humanity in August for the Adopt-a-Day Challenge in the GTA. The team of 20 SBD employees, worked on the Torbram Rd., Brampton, ON, build, sharing both their expertise and time with individuals who are working toward the goal of homeownership.

“Our involvement with Habitat GTA is a significant part of the company’s 100 Days of Giving campaign. Not only will our employees be able to brush-up their construction skills, we will all leave with a greater sense of pride and accomplishment,” said Joe Di Ilio, president of SBD Canada.

After a day of hard work, both the DeWalt and Stanley 54

HPAC | OCTOBER 2015

EMERSON CLIMATE TECHNOLOGIES MERGES TWO BUSINESSES Emerson Climate Technologies has integrated White-Rodgers, its St. Louisbased company, and Flow Controls businesses into a single organization.

This integration was expected to take Jack Huether will place October 1, 2015. take responsibilJack Huether will assume responsibility ity of the newly over the consolidated business, which is aligned busioperating as White-Rodgers. Huether, now nesses. president of White-Rodgers, has been an Emerson executive with over 30 years of HVAC industry experience. “This new alignment leaves us well-positioned to meet the evolving needs of our customers and industry partners,” Huether said.

The consolidated White-Rodgers will have a portfolio of heating and cooling products, which will be sold under both the White-Rodgers and Emerson brands.

HPACMAG.COM

“The alignment of these two businesses will create a much stronger offering from Emerson Climate Technologies in the HVAC/R market and the synergies in product development, engineering and operations will provide our customers with better solutions to their system requirements,” said Bob Sharp, Emerson executive vice president and business leader. White-Rodgers will still be part of the Emerson Climate Technologies business platform led by Sharp.

Other staffing changes as a result of the reorganization include the appointment of Geoff Godwin to vice president of OEM sales for global business. Bob Brown has been named vice president of aftermarket sales including United States, Latin America and Canada. Ed Blittschau is now the vice president of marketing and product planning. www.Emerson.com.

ONE-STOP PLUMBING AND HVAC/R SHOP OPENS IN HAMILTON Wolseley Canada’s plumbing branch in Hamilton, ON has been renovated and now offers a full line of HVAC/R products. The branch, located at 123 Dartnell Rd. has combined its plumbing and HVAC/R inventory. It also includes a kitchen and bath showroom featuring an assortment of plumbing fixtures and services for homebuilders, homeowners and designers alike.

The Dartnall Rd. branch renovation is part of a broader 2015 to 2016 initiative to upgrade existing Wolseley locations and to open new branches across Canada.

Sean O’Hara continues as the branch manager at this location. O’Hara began his career with Wolseley in 2001. www.wolseley.com

The team at Wolseley’s plumbing, HVAC/R and showroom location at 123 Dartnall Rd., Hamilton, ON. From left to right: Dean Noiles, inside sales; Shawn Furtado, outside sales; Sean O’Hara, branch manager and branch area manager; Rob Snarr, operations supervisor; Grace Viveiros, counter sales associate; Stacy Haan, showroom sales associate; Leo Jimenez, counter sales associate; Paula Grond, showroom supervisor; Danny Dicks, warehouse delivery driver; and Sandy Simpson, inside sales.

continued on p56

HPACMAG.COM

OCTOBER 2015 | HPAC

55

< MSN continued from 55 CIPH REGION SUMMIT ADDRESSES LONG-RANGE GOALS The CIPH executive committee had a successful annual summit meeting with the CIPH region presidents at the Solara Resort in Canmore, AB in August.

The meeting gave region presidents the opportunity to gain a better appreciation of the Institute. It also offered insight as to what the CIPH Board and the regions are doing to meet the needs of members through CIPH’s long-range plan.

The goals of the meeting were to: build a stronger sense of a CIPH community, strengthen CIPH and the CIPH Regions to provide meaningful programs and services, and to provide the CIPH Regions with an opportunity to share and exchange their “best practices” ideas to meet local member needs.

The first “Outstanding Region of the Year” award was presented to CIPH Quebec region president Sylvain Fournier, Moen earlier this month. This award was previously known as the “Region Program of the Year,” and focuses on a mix of important factors that together make a region successful. www.ciph.com

HEATLINK GETS A NEW FACILITY Heatlink has moved one of its warehousing operations in Calgary into a larger facility within the same city. The new warehouse is 22 000 HeatLink’s new warehouse is square feet, which is more more than double the size of its than double the size of its previous location previous facility.

The expansion is primarily a result of increased sales and market growth, and it has been designed to increase efficiency and improve customer service.

“We are experiencing continuing growth in both plumbing and heating sales, and we need this new warehouse to ensure we maintain our high standards for customer order turnaround,” said Manfred Schmidt, president of HeatLink.

This is the company’s second major warehouse expansion in the past four years. www.heatlink.com

WEBSITE FACELIFT FOR BOILER MANUFACTURER Bryan Steam’s updated website features a new design and layout with easy-to-use drop-down menus featuring its ‘Flexible Water Tube’ boilers and steam accessories.

A snapshot of the new website, Visitors to the site can also 56

HPAC | OCTOBER 2015

find links to the company’s Facebook, Twitter and YouTube pages. Bryan Steam is the originator of the flexible water tube design and offers a range of gas and oil boilers. www.bryanboilers.com

Tom Breen, Noble HVAC Sales Manager - Toronto Region prepares to announce the winners of the prize draw while Ulyana Fedyna, Noble marketing manager, HVAC & Hydronics, spins the drum.

NOBLE’S FALL KICK-OFF EVENT HITS THE MARK On October 1, the 2015 Noble Red Hot heating show drew contractors from across the GTA to Vaughan, ON for a lively, shoulder-to-shoulder evening with nearly 850 guests in total. The show featured over 45 exhibitors and offered five interactive seminars as well as many gift giveaways throughout the night.

In total, eight WeatherKing furnaces were awarded to attendees throughout the night and each seminar concluded with a draw for a prize. Prizes included the chance to win one of two $1250 give-aways in Uponor credits, a combustion analyzer kit and a NTI Tx151C combi boiler.

Andrew Smith, regional sales manager, NY Thermal, led a seminar on the benefits and draw-backs of combi boiler systems. Beginning with the basic mechanics of combi boilers, he explained the differences in units that offer storage versus those that do not. “At the end of the day, it’s a balancing act,” he said.

Other seminar topics included Gastite flexible gas piping certification, popular heating tools for the upcoming season and a discussion of WeatherKing’s Hot Furnace. www.noble.ca

DOBBIN SALES WILL SOON DISTRIBUTE EEMAX PRODUCTS Dobbin Sales Ltd. has announced that it will become the Canadian master distributer of Eemax products on November 1 of this year.

Eemax has manufactured electric, tankless water heaters for over 25 years, with products ranging from small 2.4 kW hand washing units to 150 kW commercial drench shower units. Dobbin Sales has been supplying the Canadian plumbing industry since 1978. www.dobbinsales.com HPACMAG.COM

PEOPLE > Alex (Abdallah) Naja has been appointed by Jaga Climate Systems, to lead its business development for the East Coast and North Eastern areas of Canada and the U.S. Naja has an HVAC NAJA Naja engineering background and he earned his bachelor’s degree in building engineering from Concordia University in Montreal, QC. He is a member of the Ordre des Ingenieurs du Quebec (OIQ).

Greg Gamble has joined Master Group Inc.’s senior management team as the regional vice president in Central Canada. Gamble, who has over three decades of experience in the HVAC/R Gamble industry, started his career in this sector in 1982 alongside his father, Wayne Gamble, founder of Frontier Commercial Refrigeration Ltd. He is a graduate of business management and finance.

Brian Scott has been named general manager of Wolseley’s waterworks business in Ontario. Scott joined Wolseley in 2014 as director of operPowers Scott ations, waterworks, Canada. As general manager, Ontario, Scott will manage Wolseley’s seven waterworks branches in the province. Scott has more than 15 years of experience in the industry. In other Wolseley news, Jim Powers has been appointed regional manager of the wholesaler’s waterworks business in Atlantic Canada.

He joined Wolseley in 1998 as a shipper and receiver and he was promoted to inside sales representative the following year. He became the branch manager at Wolseley’s waterworks location in Dartmouth in 2007 and in 2014, was promoted to regional manager for waterworks branches in Nova Scotia and Newfoundland and Labrador. This new position gives him responsibility for all four waterworks branches in Atlantic Canada.

InSinkErator Canada has announced the appointment of Kevin VanderWerf to national channel marketing manager, effective on October 1, 2015. VanderWerf started with Emerson in VanderWerf 2002 as a product manager at ClosetMaid and spent five years with this company before leaving to become the marketing/product development manager for a Canadian ladder manufacturer. VanderWerf re-joined Emerson in 2011 in the ClosetMaid sales department.

Danfoss Turbocor Compressors Inc. has appointed Jose Alvares to vice president of sales and marketing and global customer support. In this role, Alvares will be responsible for application and technical support, product management and marketing, business development and a digital service platform. He has more than 20 years of experience in global HVAC and refrigeration roles. Alvares started working with Danfoss Tubocor Compressors in 2006 and was most recently their director of sales for North America.

Denso Corp. has named Hal Kato president of Denso Products and Services Americas, Inc. Kato succeeds Yoshihiko Yamada, who has retired after 38 years with the corporation. As Kato president, Kato will oversee 470 employees at the company’s facilities in Long Beach and Murrieta, CA. His duties include managing the sales, manufacturing and distribution operations of MovinCool and various other companies.

Kai Kanola, executive vice president of weather business area at Vaisala Oyj, has been nominated as Halton Group’s new CEO. This change in management will follow Heikki Rinne’s, CEO of Halton Group, retirement in January 2016.

Kanola is expected to assume the role in December of this year, and brings versatile experience in demanding executive positions in global technology companies.

Malco Products Inc. has appointed Timothy Peterson as sales leader for HVAC markets in Canada and the U.S. He has over 20 years of sales experience in both domestic and internaPeterson tional markets where he has managed independent sales forces and developed distribution networks. He also has national account experience.

Ken Roberts began his new role as president of Masco Canada on September 1, 2015. Roberts has a degree in mechanical engineering and holds master’s degrees in business administraRoberts tion and engineering management. He has been with Delta Faucet Company for 22 years. His most recent position was vice president-international, with responsibility for the global expansion of Delta Faucet.

SEE MANUFACTURER & SUPPLIER NEWS, P52 HPACMAG.COM

OCTOBER 2015 | HPAC

57

October 2015

FREE to qualified subscribers!

Simply fax this form today or visit www.hpacmag.com and click subscribe!

STAY CONNECTED…

Please fill in the following and fax today to 416-510-5170 or visit our website and click on subscribe www.hpacmag.com

YES!

I wish to receive/continue to receive HPAC Magazine absolutely FREE! No

Name Title Company Address City

Province

Business Phone # (

)

Business Fax # (

Postal Code

)

Your FREE subscription also includes our FREE e-newsletter, please provide your e-mail address below: E-mail: Signature

Date

(Must be signed and dated to be valid)

/ D

/ M

Y

1. Company Business Activity? (Check ONE only)

◻ Mechanical Contractor ◻ Refrigeration Service Engineer/Contractor ◻ Fuel Oil Dealer/ Contractor ◻ Wholesaler/Distributor/Agent ◻ Consulting Engineers/Specifying Writer ◻ Plumbing Inspector ◻ Government ◻ Hospitals and Related Institutions ◻ Utilities ◻ General Building Construction ◻ Others Allied to the Field (please specify) ––––––––––––––––––––––––––––––––––––––––––– –––

2. Do you specify, purchase and/or approve the purchase of mechanical products or services?

◻ Yes

◻ No

3. Company Job Sector? (Check ALL that apply)

◻ Commercial ◻ Residential ◻ Industrial ◻ Institutional 4. Number of employees at this location?

◻ 1 - 4 ◻ 5 - 9 ◻ 10 - 19

◻ 20 - 49 ◻ 50 - 99 ◻ 100 - 199

◻ 200 - 499 ◻ 500 - 999 ◻ 1000 - 2499

◻ 2500 + ◻ Unknown

5. Company Job Activities? (Check ALL that apply)

◻ Plumbing (i.e DHW, Piping etc.) ◻ Ventilation ◻ Refrigeration ◻ Forced Air Heating ◻ Electric Heating ◻ Air Conditioning

HPAC Magazine

80 Valleybrook Dr., Toronto, ON M3B 2S9

◻ Hydronic Heating ◻ Fire Protection ◻ Other––––––––––––––––––– (please specify)

FAX: 416-510-5170

Publisher reserves the right to determine qualification & limit distribution.

RENEWABLES >

NET ZERO HOME SHOWCASES TECHNOLOGIES

Photos Reid’s Heritage Homes

O

ver 400 members of the public showed up at Reid’s Heritage Homes’ grand opening for its newly constructed Net Zero Energy home in Guelph, ON, on September 19. The Net Zero Discovery Home is the first to be completed as part of a national demonstration project to prove that Net Zero homes can be built on a community-level scale.

Features of the home include: advanced heating and cooling capabilities, with a modulated delivery system and floor zoning; 33 solar panels on the back roof; hybrid heat pump water heater; drain water heat recovery system; insulated and airtight design provide an advanced envelope style; and triple pane

windows. A second Net Zero home, built beside the Discovery Home, offers 1775 sq. ft. of living space and is listed for sale at $523,525.

The goal of the project is to make Net Zero Energy homes, which can produce as much energy as they consume on an annual basis, fully accessible and affordable to all Canadians. Reid’s Heritage Homes, which is building five homes as part of this project, is one of five builders that were selected to participate in the national project. At least 25 Net Zero Energy homes will be built in Nova Scotia, Québec, Alberta, and Ontario. This total will almost double the amount of Net Zero Energy homes currently in Canada.

The project is funded in part by the

ecoENERGY Innovation Initiative (ecoEII), with contributions from each participating builder, industry suppliers and Owens Corning Canada. Reid’s Heritage Homes’ first five Net Zero homes are being built in the builder’s signature family community of Westminster Woods, located in Guelph.

Construction Voyer is building a threestorey condominium with six units in Laval, QC and Minto Communities is constructing a single detached model home and a row of four townhouses in Kanata (outside of Ottawa, ON).

Mattamy Homes Limited in Calgary, AB, Provident Development Inc. in Halifax, NS and Reid’s Heritage Homes are each building five single detached homes in Calgary, Halifax and Guelph.

Net Zero Discovery Home, Guelph, ON

HPACMAG.COM

OCTOBER 2015 | HPAC

59

PLUMBING PRODUCTS Job Pack Faucets contain 4 in. and 8 in. two handle lavatory and kitchen faucets and single handle tub and show trim kits for mix and match combinations. These faucets are lead free and have less than .025 per cent weighted average lead content on wetted surfaces. Special features include metal lever handles, washerless cartridges and a maximum flow rate of 1.5 GPM at 60 PSI. Choose from chrome or brushed nickel finishes in the lavatory faucets. The kitchen faucets come in chrome and stainless steel finishes. www.matco-norca.com

Navien’s NPE-150S model is a smaller size ‘S’,

Keltech electric tankless water heaters are designed to be used

Standard version, with an efficiency of .99EF. It

for high flow, safety, industrial or custom applications. Once con-

has a heating capacity of 18 000 to 120 000, and

nected to a water and power supply, the Skid Series is ready for

is suite to smaller residences or to cascade

many situations, including those in remote locations. Models

where a bit more DHW is required. Features

CNA-SKID and SNA-SKID are pre-piped, pre-assembled transport-

include a ½ in. gas pipe capability, 2 in. PVC

able skid systems suited to higher flow industrial water heating

venting up to 60 ft., dual stainless steel heat ex-

applications. While the CNA-SKID features back-to-back CNA and

changers and an integrated control.

CNAR large industrial heaters, the SNA-SKID offers back-to-back

www.navien.com

SNA and SNAR safety heaters. www.bradleycorp.com Quick Stand floor mounted water heater/ equipment supports from Holdrite are the newest addition to the Quick Stand water heater accessories line. They are third party engineer Pomme, from THG Paris, is a contemporary

certified water/heater supports. This product

bath collection. The handles are in the

allows users to mount water heaters and

shape of apples, with finishes including

equipment in open spaces directly to the floor.

crystal, clear satin or gold lustre. The rim

Available in three models, the Quick Stand sup-

mounted, three-hole bath mixer features a

ports water heaters up to 100 gallons.

super Goliath spout. www.thg.fr

www.holdrite.com

Taco’s SmartPlus, Hot-Link, TacoGenie and Plumb n’Plug pumps are intended for hot water recirculation systems.

The Plumb n’Plug has an optional 24-hour analog or sevUponor’s pre-insulated PEX pipe system for underground

en-day digital programmable

potable-plumbing applications provides energy-efficient

clock, which can be set to

freeze protection in cold climates. The Ecoflex Potable

run during peak usage hours

PEX Plus pipe features 1 ¼ in. Uponor AquaPEX service

or continuously. SmartPlus is fully automatic. When set to ‘smart’ mode, the circulator

pipe with a 7 W/ft. heat-trace cable that runs the entire

records each time hot water is called for within a week, then duplicates the pattern the

length of the pipe. The pipe, which is approved for under-

following week. Hot-Link offers instant hot water with no additional plumbing or electrical

ground potable-water applications, is available with a full

required. TacoGenie is a small pump that attaches to hot and cold water lines in the

line of accessories and uses Uponor’s ProPEX ASTM

cabinet under the most remote kitchen or bath fixture. When activated, cool water that

F1960 expansion fittings for durable, reliable connec-

normally runs down the drain is re-circulated back to the water heater through the cold

tions. It is offered in 300-ft. coil lengths, with custom-cut

water line. When hot water arrives at the faucet, the pump automatically shuts off to

lengths available as well. www.uponor.ca

prevent pumping excess hot water into the cold water line. www.taco-hvac.com

60

HPAC | OCTOBER 2015

HPACMAG.COM

HVAC PRODUCTS The Daikin VRV bespoke plug-in system is to be used with the IES-VE integrated analysis tool. The plug-in is a specification tool enabling consultants to make energy simulation for Daikin heat pump and heat recovery VRV systems including the Variable Refrigerant Temperature (VRT) function, in

Franklin Electric Co., Inc. offers a new Little Giant SpeediDuct line set

modeling methodology. The plug-in covers

duct and accessories to cover, protect and aesthetically hide refrigera-

all Daikin VRV-III and VRV-IV outdoor and

tion line sets for both mini-split and ducted air conditioner systems.

related indoor models. The plug-in simulates and compares different

Available in white or ivory, SpeediDuct can also be painted to match any

systems based on building load and generates power input calcula-

exterior wall colour. There are multiple sizes of straight duct along with

tions for the whole year using detailed engineering product data. It

accessories, such as elbows, bends, caps, and joints, which provide a

also exports VRV equipment sizing details to Excel for review.

flexible solution around any problematic location or application. Speedi-

www.daikincomfort.com

Duct is easy to use and UV resistant. It has a flush-fit outer design against the wall reducing gaps.

The SPM-100 Smartphone static pressure meter fea-

www.littlegiant.com

tures a free app that provides onscreen guidance, helping users take accurate measurements. Aside from be-

The Quick Swivel HVAC hanger from Quick-

ing

SPM-100

Sling can be used in residential and commer-

e-mails professional detailed reports within the compli-

a

dual

port

manometer,

the

cial applications. The mounting plate is pre-

mentary app enhancing professionalism and confirming

slotted to receive a 3/8 in. hex bolt, which can

the performed work. It tests static pressure, pressure

be attached parallel or perpendicular to the

differential, indoor versus outdoor pressure and system external static

joist. The Quick Swivel allows for 360 degree

pressure. It also has a magnetic back for hands-free operations.

rotation for air flow direction control and can

www.AABsmart.com

hold up to 400 lbs. It offers a non-swinging, rotating platform that is safe and budget friendly.

BRANT RADIANT HEATERS LTD.

www.quick-sling.com The Marley NC 8400 Cooling Tower from

Celebrating 50 Years of Great Service!

SPX Cooling Technologies, Inc. is a factory assembled and cross flow evaporative cooling system. It has increased efficiencies and a reduced footprint suitable for new and replacement cooling in HVAC, light industrial and power applications. The performance enhancements contribute to greater cooling and energy efficiencies and operational reliability. The upgrades offer lower drift rates and enhanced vibration protection for a smoother start-up and stability. Expanded options include cold water basin inlet covers to block sunlight and debris.

The Re-Verber-Ray HL3 Series is packed with quality features represented by today’s most energy efficient infrared tube heaters.

The series captures operational benefits of both high and low stage radiant comfort.

Our newly designed control boxes now leave tools-free serviceability while in operation.

In addition we use the highest quality materials and construction features ensuring years of reliable operations.

www.spxcooling.com Fujitsu

Halcyon

mini-

split and HFI systems installed

by

licensed

contactors with submitted online registration, now have a 10 year parts and compressor warranty. A 12 year parts and compressor warranty is also available for systems installed by an Elite contractor, again with online

34 Scott Ave., Paris, Ontario N3L 3T5 Canada brantradiant.com • sales@brantradiant.com 1-800-387-4778 • Fax: (519) 442-7321 62

HPAC | OCTOBER 2015

registration. All R22 and IAQ models are excluded. www.fujitsugeneral.com

continued on p64 HPACMAG.COM

T H E W O R L D â&#x20AC;&#x2122; S L A R G E S T H VAC R M A R K E T P L AC E The AHR Expo brings 60,000 HVACR professionals together to see the latest products & technology, learn from industry experts, and build relationships.

REGISTER FOR FREE

AHREXPO.COM

HVAC PRODUCTS continued from 62 WhisperFit EZ is a retrofit solution for re-

All Modine geothermal systems – from 1.5 tons

modelers looking to replace an existing fan

to 12 tons – now feature the proven Modine Con-

from below the ceiling. The WhisperFit EZ

trol System, providing quick start-up, easy safety

uses the existing duct, while its design en-

device wiring, multiple inputs and outputs, BAC-

sures a secure and proper fit in just about

net IP/Eth, BACnet MSTP and Lon capability

any ceiling. It is available in three models,

and easy troubleshooting. The EnergyStar-rated

non-lighted, lighted and non-lighted with motion sensor. The WhisperFit

residential and light commercial geothermal

EZ is suited to remodeling, and hotel construction and renovation. The

product line includes water-to-water, water-to-air,

Flex-Z fast bracket makes for flexible and easy installation and the

water-to-air/water combination and split con-

Pick-A Flow Speed Selector gives users customized airflow.

densing/air-handling systems; all use R410A

www.panasonic.com

refrigerant. Standard features include ECM fan motors, dual speed scroll compressors, MERV Emerson Technologies has announced that

13 air filters, oversized heat exchangers and a 10-year limited warranty.

the Application Engineering (AE) Bulletin, a

www.modinehvac.com

convenient tool that provides access to critical information regarding the application of

Luxaire Residential Split air condition-

Copeland products, is now available. The on-

ers with a 14 Seasonal Energy Effi-

line database makes it easy for contractors

ciency Ratio (SEER) save 29 per cent

to obtain important operational and service

more on energy than older 10 SEER

guidelines. Instead of publishing manuals,

models. The family of completely re-

the AE Bulletin provides easily searchable and up-to-the-minute product

designed products will include 21+

updates which can be accessed from virtually anywhere on a smart-

SEER models, due to variable-speed

phone, tablet or desktop computer with an internet connection.

technology. They feature easy top and

www.EmersonClimate.com

side access to commonly serviced items and conveniently located service valves. Both the indoor and outdoor units are designed for system optimized and precise matchups.

Screw Compressor Overhauls

www.luxaire.com Tjernlund Products offers the Xchanger reversible fan, which is available in two styles. Model

AT IRSI our factory-trained technicians overhaul all major manufacturer screw compressors used for refrigeration with quality OEM parts.

X2D is designed for mounting directly next to

Our fast pricing and quick turnaround limit costly downtime.

be positioned to move air in either direction.

You can rely on our 50 years of rebuilding and repairing expertise to provide you with the best service in the industry.

the interior, draw outside air into the home or

We also supply refrigeration plant operators for your shift coverage needs.

an outside wall and Model X2R can be connected to the outside intake/exhaust hood.

Both feature reversible 90 CFM fans that can The user has three options: exhaust air from reverse one fan for a balanced air exchange. www.tjernlund.com York YD model “C” dual compressor cen-

Industrial Refrigeration Parts, Equipment & System Sales and Service

trifugal chillers from Johnson Controls offer

PHONE 905-702-8802 WEBSITE www.indref.ca EMAIL irsi@indref.com

an increased capacity range of 1500 to

Optispeed variable speed drives (VSD) and 6000 tons. The addition of unit mounted low voltage or floor-mounted medium range VSD optimizes the chiller and improves its already outstanding part-load efficiency by as much as 13 per cent. At AHRI conditions, the YD model ‘C’ provides up to 3000 tons of cooling. The chiller is ideal for retrofit applications where large amounts of cooling are needed in a small space. www.johnsoncontrols.com

continued on p66 64

HPACMAG.COM

HPAC | OCTOBER 2015

Industrial Refrigerated Systems.indd 1

15-08-11 1:57 PM

Any way you add it up, the solution is 33.

1 14 14 4 11 7

6

9

8 10 10 5 13 2

3 15

Introducing

The World’s Most Efficient Mini-Split

33 SEER Fujitsu’s ductless wall mounted 33-SEER 9RLS3H is the solution to the problem that is energy inefficiency. This system is 2.35 times more efficient than the government minimum standard and qualifies for the ENERGY STAR® Most Efficient category in 2015. System 9RLS3H provides heating in outdoor temperatures as low as -15°F with an HSPF of 14, all adding up to year-round comfort and savings. To solve your heating and cooling needs, visit www.fujitsugeneral.com.

HVAC PRODUCTS continued from 64 The Coleman Residential Split System features

The Nordic ATW series is an air source heat pump that

easy top and side access to commonly serviced

heats water for an in-floor heating system, or cools water

items and smooth edges for easi-

for air conditioning. The Nordic ATW Series uses heat

er handling. Contractors will ap-

transfer from outdoor air to heat and cool homes. This

preciate a standardized design

pump is available in sizes up to 6.5 nominal tons, for

that reduces complexity by re-

whole-home heating and cooling applications. The out-

quiring fewer replacement parts.

door portion of the unit is designed to combat harsh Canadian winters, and

Additionally, a comprehensive and

there is an intelligent defrost logic, which prevents damage to the air coil.

competitive product portfolio includes options at a variety of price

www.nordicghp.com

points to meet a wider range of customer needs. Outdoor units reduce sound levels to 71 dBA, while an improved airtight indoor cabinet de-

WaterFurnace has introduced a waterside econo-

sign meets a strict two per cent or less air leakage requirements. In

mizer option to its commercial product line. Avail-

addition, a corrosion- and rust-resistant coated finish on steel wire fan

able on two to six ton horizontal and vertical Ver-

guards and external fasteners and pre-treated, G90-equivalent galva-

satec Base, Versatec Ultra Envision2 Compact

nized steel chassis components combine to enhance durability.

and seven to 25 ton horizontal and vertical Envi-

www.colemanac.com

sion XL products, this option allows the use of a building’s interior loop water to offer ‘free’ cool-

Stelpro’s duct heaters include three models:

ing. The Waterside Economizer passes air through an internal coil, which is

SDHI (insertion), SDHF (flange) and SDHR

cooled by loop water instead of mechanical refrigeration. The unit has a

(round). All are available cus-

water-to-air heat exchanger, a three-way valve and controls that manage the

tomized, and the 20 to 16

water flow through the heat exchanger. When cooling is required and the

gauge galvanized steel cabi-

building loop water temperature is below the economizer setpoint, which is

net is resistant to corrosion.

typically 45F, water passes through the economizer. Air is drawn through the

The modular electric section can be

cool economizer and the heat pump’s compressor is turned off. Cooling is

separated from the ventilated casing, which helps with installation and

then provided by the economizer.

maintenance. Modulation of the elements by the SSR technology main-

www.waterfurnace.com

tains a constant temperature using only the required energy. www.stelpro.com

Greenheck’s Grease Trapper pollution control unit removes grease, smoke and

RectorSeal Desolv is now available in

odours from kitchen exhaust. The Grease

16-ounce aerosol cans. Desolv Aerosol

Trapper uses a three-stage mechanical fil-

and its two-stage nozzle safely powers

ter arrangement to remove grease and smoke particles from the exhaust air

off dirt, biological contaminants, debris

at an economical first cost. For ease of maintenance, independent pressure

and films within minutes with its concentrated, atomized and odorless

switches signal when any of the three filter stages need replacing. Activated

spray that penetrates into mini-split evaporator coils and blowers. The

carbon panels remove odour molecules prior to discharging the air, reducing

unique two-stage actuator nozzle offers a low-flow stream when the

the impact of kitchen exhaust to the surrounding areas. Built in accordance

hinged straw holder assembly is flipped up, and a high-flow stream

with NFPA 96, the Grease Trapper has performance capacities up to 12,000

when it is flipped down. The straw is permanently attached to the

cfm and MERV filters ensure a minimum overall particulate removal efficiency

hinged flip-up holder assembly and cannot be lost or misplaced.

of 95 per cent.

www.rectorseal.com

www.greenheck.com

Daikin’s Trailblazer, the customizable

The X-Plus UV fixture from UV Resources ac-

chiller, now available in sizes from 30-

commodates 17- to 61-in. extended base

240 tons, helps facility staff meet their

lamps and easily mounts from the exterior of any

needs for reliability, budget sensitive

HVAC system, air handler, plenum or duct. The

and maintenance friendly solutions.

X-Plus extended UV-C lamp-base series is ideal

The air cooled scroll chillers are widely

for hard-to-access outdoor and indoor HVAC equipment and is designed to

accessible and provide efficiencies and low cost of ownership from in-

maximize lamp strength, UV and heat resistance. It is an inexpensive, low

stallation throughout the course of its life cycle. Trailblazer is built on

weight system that allows contractors to incorporate the benefits of UV-C

the solid foundation of reliability and robust design of Daikin’s AGZ

technology almost anywhere needed. Lockable access presents unauthor-

chiller product. It is ideal for retrofits and easy to integrate.

ized service and it has a two-step power down feature.

www.DaikinApplied.com

www.uvresources.com

66

HPAC | OCTOBER 2015

HPACMAG.COM

today’s cool choice

The ideal replacement for R404A in supermarkets is here — Honeywell Solstice ® N40 (R448A).

There’s no need to wait for a replacement solution. Honeywell has you covered.

Solstice N40 is a versatile, blended, ASHRAE A1-rated refrigerant that satisfies all your low- and medium-temperature refrigerant replacement needs. Plus, it’s 5-10% more energy efficient than R404A! Its close match to existing equipment designs and compressors makes for rapid, cost-efficient adoption, and its GWP is 40% lower than R404A, making it a good choice to meet evolving regulatory standards. It’s also a superior replacement for R22 with a good capacity match and no TXV changes.

Canadian Refillable Cylinders Available

To learn more about Honeywell Genetron Performax LT, visit www.honeywell-refrigerants.com. or call 1-800-631-8138 © 2015 Honeywell International Inc. All rights reserved.

< REFRIGERATION

WHAT IS GOING ON IN THE WORLD OF

SUPERMARKET REFRIGERATION?

I

t comes as no surprise to anyone that supermarkets are under pressure to embrace green. As applied to the refrigeration portion of a supermarket this translates into: reduce carbon footprint, lower Global Warming Potential (GWP), reduce refrigerant charge, reduce electrical consumption and increase efficiency.

Letâ&#x20AC;&#x2122;s discuss the GWP portion.

Figure 1 compares refrigerant usage in a sample of over 8000 existing U.S. supermarkets and how that usage trends between 2007 and 2013. As one would expect, it shows a dramatic move away from R-22. This is a reflection of a two pronged effort to reduce R-22 use in supermarkets; new stores transitioning to refrigerants other than R-22, and existing R-22 supermarkets converting to a lower GWP alternative.

It is no surprise to see the percentage of stores using R-22 decrease. It is equally of no surprise to see the use of R-404A increase. What might appear surprising on the surface is R-407Aâ&#x20AC;&#x2122;s appearance as a contender. The fact is that R-407A offers a good capacity com68

HPAC | OCTOBER 2015

parison to R-22 (approximately 103 per cent in medium temperature applications, and approximately 95 per cent in low temperature applications). In low temperature applications R-407A will have a significantly lower discharge temperature (approximately 60F) than R-22, reducing the need for capacity robbing demand cooling.

Additionally, the mass flow requirements for R-407A are very close to R-22, meaning that there are no TEV or distributor nozzle replacements required when converting an existing R-22 system to R-407A. Finally, as a refrigerant that is out of patent, it has a wide base of distribution at very competitive prices.

What might be a little more telling is Figure 1 Comparative refrigerant usage

REFRIGERANT 2007 2013 GWP

R-22

64%

37%

-----

R-404A

19%

40%

3922

R-507

9%

6%

3900

R-407A

0%

11%

2110

the information in Figure 2, which is based on information provided by OEMs in 2012. Here you see that approximately 40 per cent of all new supermarket equipment is built for use with R-407A. This is a reflection of several major supermarket chains changing their refrigerant specification to R-407A. This certainly constitutes a trend towards using a refrigerant with a lower GWP. Remarkably, this shift towards R-407A (a lower GWP refrigerant) was done without government regulation.

Even so, in the U.S., a presidential executive order was signed in 2013 directing the EPA to use Significant New Alternatives Policy (SNAP) to reduce emissions of HFCs. In response to that executive order, the EPA recently issued a final ruling that changes the status of certain refrigerants and their use in certain applications.

Particularly targeted were R-404A and R-507, due to their relatively high respective GWPs of 3900 and 3922.

Beginning January 1, 2017, both of these refrigerants will be banned from use in new store installations consisting of systems with more than one compressor (including multiplex compressor racks, distributed systems, secondary refrigerant systems, and so on).

The same ban will apply to single condensing units, beginning January 1, 2018. In addition, any supermarket refrigeration system undergoing a refrigerant conversion will be banned from using R-404A/R-507 beginning July 20, 2018.

This ruling does not affect existing R-404A/R-507 systems, nor does it require a phase out of the importation of new production of R-404A/R-507.

While the move away from R-404A and R-507 now has the power and authority of the government behind it, the supermarket industry and the associated marketplace are continuing in their effort to anticipate future regulations. As such, there are two new refrigerants in the offing; R-448A (a HPACMAG.COM

REFRIGERATION > Honeywell product) and R-449A (a Figure 2 Comparative refrigerant usage in new supermarkets DuPont product). These are zeotropic blends that are somewhat similar to the current crop of R-22 alternatives, in that they are blended from the same R407A building blocks used in many currently available R-22 alternatives (R-32, R404A R507 R-125 and R-134A). Where they differ is that these blends also contain a percentage of one or both of the ultra low GWP HFO (Hydrofluoroolefin) refrigerants HFO-1234yf and HFO-1234ze.

These two refrigerants look promising. In addition to a significantly lower GWP, they offer slightly higher capac- adding inefficiency to the system, the permarket to use carbon dioxide (CO2) ity and efficiency than R-404A. As reduction in refrigerant charge is sig- as a heat transfer fluid for frozen food with any new refrigerant under patent, nificant. In addition, the thousands of display cases was opened by Loblaws you can expect them to initially be feet of pipe, array of control valves, so- in Scarborough, ON. Quebec has the more expensive. They have not been lenoid valves, thermostatic valves majority of Canadaâ&#x20AC;&#x2122;s CO2 supermarSNAP approved as of yet. have all been removed from the refrig- kets (53 out of 74 in 2013) with In addition to replacing R-404A and erant circuit, resulting in a dramatic Alberta and Ontario having the remainR-507 with lower GWP alternatives, reduction in leak potential. ing installations (11 and four respecthere are other designs that are trendDespite the significant reductions in tively in 2013). While it still comprises ing, which result in the reduction of re- GWP that can be realized with R-407A, a minority of installations, CO2 does frigerant charge. These include or the upcoming R-448A/R-449A, the provide another option for those seekdistributed and secondary systems. aptly named natural refrigerants are ing GWP reductions.

Distributed systems are smaller still looming on the horizon. These inIn the very small minority, there multi-compressor racks (typically clude CO2 (R-744), ammonia (R-717) have been applications of ammonia scroll compressors), strategically lo- and propane (R-290). While each of based secondary systems. In these cated closer to the fixture/box loads these has its own specific application applications ammonia is the primary they are providing capacity for. Not challenges, their major benefit is that refrigerant providing cooling capacity only does this eliminate the extra ex- they are non-ozone depleting and have to reduce the temperature of the secpense of a dedicated machine room, essentially no effect on global warm- ondary fluid being circulated to the rebut the shorter piping runs result in ing. Indeed, the GWP of CO2 is one. frigerated space. smaller refrigerant charges.

Even propane is seeing some use in Other refrigerantâ&#x20AC;&#x2122;s GWP is a reflection In secondary systems, chillers are of its impact on global warming in prototype supermarket applications. common for comfort cooling or indus- comparison to CO2.

As a natural refrigerant, its impact on trial applications. They are large self2006 saw the first application of the environment is considered negligicontained packages, where the CO2 in a U.S. supermarket. It was uti- ble. Of course, propane has one minor refrigeration capacity is dedicated to lized in a chiller application, with the drawback and that is its flammability. cooling or chilling a secondary fluid CO2 performing the function of the However, if the total system charge down to a temperature required by the pumped secondary fluid to the various does not exceed 150 grams it can be system design. This secondary fluid is low temperature fixtures. With CO2â&#x20AC;&#x2122;s used in commercial applications. then pumped to the spaces that need greater latent heat capacity, design As an alternative to investing in an cooling capacity. As applied in a super- flow rates are significantly compared expensive CO2 system, one supermarmarket, the chiller will reduce the tem- to other secondary fluid alternatives. ket chain recently opened a store utiperature of a secondary fluid (propylene The resulting smaller pipe size require- lizing propane refrigeration systems. glycol or CO2), which is then pumped ment yields lower material costs.

While the application presented some Since that first application nearly a challenges, specifically the 150-gram to heat exchangers in display cases or decade ago, many of the major super- charge limit, a workable design was walk-in boxes.

While there is a second stage of market chains have tested the viability achieved by utilizing individual selfheat transfer in a chiller application, of CO2. In 2008, the first Canadian sucontinued on p70 HPACMAG.COM

OCTOBER 2015 | HPAC

69

EFRIGERATION < R continued from 69 contained condensing units for each glass door display case, and some walk-in boxes. The reduced load resulting from doors on cases allowed small charge systems to be a workable solution.

In addition to using an environmentally friendly refrigerant, the relative simplicity of these systems eliminated a significant portion of the installation charge. The self-contained nature eliminated the need for large amounts of pipe to connect remote compressor racks to the evaporators and the necessary labour to do so. In addition, the hope is that the simplistic design will greatly reduce the maintenance expense. Should a catastrophic failure occur with the selfcontained unit, it can simply be replaced rather than repaired, not unlike a household appliance.

Certainly the modern supermarket, with the amount of refrigerated product available to the consumer and the volume of refrigeration system capacity necessary to maintain the integrity of that product, has been a focus for sustainability from environmental agencies. Do not expect this to change. In fact, you can count on ever increasing regulations requiring the larger commercial ventures utilizing refrigeration equipment to be held to higher and higher standards.

Whether you agree with the debate about global warming or not, there will be ongoing government regulation to ensure that businesses minimize their affect on potential damage to our environment.

GIZMOS & GADGETS The 5790B AC Measurement Standard from Fluke Calibration is a multi-purpose ac measurement and transfer standard designed for the most demanding calibration applications.

It combines the accuracy of a thermal transfer standard with the ease of use of a digital multimeter. The 5790B covers an alternating voltage range of 600 μV to 1000 V, and a frequency range of 10 Hz to 1 MHz. Wideband voltage options extend frequency range to 30 or 50 MHz. The 5790B in combination with the Fluke A40B Current Shunts now allows users to make direct, absolute or relative current measurements without the need to perform any calculations. www.us.flukecal.com Milwaukee’s M12 heated three-in-one Ripstop jacket partners a heated hoodie with a shell for warmth and versatility. The heated hoodie is water and wind resistant and made with 900 Denier Ripstop fabric. Milwaukee Heated Gear is also launching the M12 heated Ripstop vest, and the M12 heated women’s jacket which features a new cut and improved styling. Redlithium 2.0 batteries, which provide up to eight hours of heat, are being sold with M12 heated gear. The heated jackets feature an upgraded 2.1A USB battery controller, which is compatible with latest generation mobile devices. www.milwaukeetool.com ThermaCell heated insoles’ temperature settings are controlled by a wireless remote, which allows for easy temperature adjustment without removing shoes or boots. Users can choose from two temperature settings, as well as no heat. The insoles are water resistant, come in five sizes and can be trimmed to fit most types of boots and shoes. www.heat.thermacell.com

TurboTorch has released the TDLX rolling tote kit featuring a wide base and better wheel design for greater stability and durability. It has a telescopic pull handle, which allows technicians to move 50-lb. acetylene B tanks. The pockets are designed to hold specific

Dave Demma holds a degree in refrigeration engineering and worked as a journeyman refrigeration technician before moving into the manufacturing sector where he regularly trains contractor and engineering groups. He can be reached at ddemma@uri.com.

70

HPAC | OCTOBER 2015

equipment necessary for sol-

Modine has introduced customized unit

dering and brazing. A metal

hot dog heaters available in camo (Hun-

sleeve enables hot tip stor-

tin’ Dawg), diamond plate (Diamond

age, and a security strap se-

Dawg), carbon fibre and satin black. The

cures the tote inside a vehicle. It

heaters are available in four sizes,

comes with a tote case, an Extreme self-lighting tip,

30 000, 45 000, 60 000 and 75 000 Btu

an Extreme standard tip, a torch handle, an acety-

– for propane or natural gas in standard

lene regulator and a 12-ft. hose.

power vent.

www.esabna.com

www.modinehvac.com HPACMAG.COM

When he reduced costs by 13% with a new RTU, he wasnâ&#x20AC;&#x2122;t just saving money.

He was setting a precedent.

Once your clients start seeing the benefits of our incentives for upgrading to high efficiency RTUs, they will want to look into making other parts of their business like ventilation, chiller and building automation systems more efficient too. When they do, theyâ&#x20AC;&#x2122;ll be joining thousands of organizations across Ontario who are already enjoying the savings that our programs deliver.

Take a look at their stories and our incentives at

saveonenergy.ca/business

Subject to additional terms and conditions found at saveonenergy.ca. Subject to change without notice.

OM Official Mark of the Independent Electricity System Operator.

< INDOOR AIR QUALITY

IN A

FIELD OF ITS OWN

Standard practice for evaluating residential indoor air quality concerns.

I

By Robert Bean

ndoor air quality (IAQ) concerns in residential buildings range from irritation and discomfort, to health problems as a result of unacceptable exposures to odours, particulate, gases, chemical and biological matter.

For these reasons in the continuum of construction there will always be expanding prospects for IAQ solutions for firms that are interested in increasing their services and product offerings.

Due to the intimate relationship between the health of the environment and health of the occupants, it is important that those interests are approached knowledgably through education, awareness and professionalism.

COMPLEX FIELD Let us start by stating IAQ is part of a comprehensive field of study referred to as indoor environmental quality (IEQ), which is coupled to an even bigger field of study in human factors and ergonomics.

For those pursuing IAQ opportunities, it will become apparent that the field is the intersection of many studies with each of those being many layers deep.

Specifically for buildings, IAQ stands 72

HPAC | OCTOBER 2015

as one of six primary terms within IEQ, expressed collectively as: IEQ = IAQ + ITQ + ILQ + ISQ + IOQ + IVQ where I = Indoor, Q = Quality A = Air T = Thermal

L = Lighting S = Sound O = Odour V = Vibrations

As one can see, it is incorrect to imply that IAQ stands alone as a proxy for IEQ as is sometimes mistakenly communicated even by experts from within the health and building community. For example, the U.S. Centers for Disease Control and Prevention (CDC) has stated, “Indoor Environmental Quality simply refers to the quality of the air in an office or other building environments.” This statement has been copied and restated by countless “authorities” and continues to be used even though the CDC has since corrected its definition.

To bring the topic of separation to the discussion, an authoritative document, ANSI/ASHRAE Standard 62.2 Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings states,

“This standard considers chemical, physical, and biological contaminants that can affect air quality. Thermal comfort requirements are not included in this standard (see ANSI/ASHRAE Standard 55-2010, Thermal Environmental Conditions for Human Occupancy).”

Translation: residential IAQ practitioners must be clear that ventilation, indoor air quality and thermal comfort are standalone studies.

ASHRAE 62.2 defines IAQ as, “air toward which a substantial majority of occupants express no dissatisfaction with respect to odour and sensory irritation and in which there are not likely to be contaminants at concentrations that are known to pose a health risk.”

The publication also states, “While acceptable IAQ is the goal of this standard, it will not necessarily be achieved even if all requirements are met.”

Some reasons for this include, diversity of sources and contaminants; range of susceptibility in the population; and perception and acceptance being affected by temperature, humidity, noise, lighting and stress.

Clearly IAQ is not just a matter for service providers defaulting to filtration and HPACMAG.COM

(de)humidification upgrades, in fact these solutions can often mask the source of the IAQ problem.

I have addressed much of the above in previous articles in HPAC, so why regurgitate the message? I hope to underline for HVAC professionals that one has to be clear in one’s objectives – understanding that an IAQ inspection would include addressing odour and irritation complaints due to contaminants. But how do you deal with the tricky, and often subjective, topic of smells? Also, what is an irritant and does that require the knowledge of a medical professional? How about contaminants? How do these differ from pollutants and toxicants? Does it matter?

INVESTIGATIVE PROCEDURE One authoritative document that offers up a nice serving of guidance, including investigative flow charts, questionnaires and check lists, is ASTM D7297-14 Standard Practice for Evaluating Residential Indoor Air Quality Concerns.1 It says the, “Characterization of IAQ concerns and identification of their underlying causes require systematic observations and measurements of the indoor environment, its occupants and contaminant sources.”

The procedures in the ASTM D7297 include a three phase investigative procedure from telephone and face-to-face interviews, to follow up protocols for site investigations, assessments and measurements. The results of these exercises then serve as the basis for recommending corrective measures.

The Standard has several “pause points” throughout the process to allow investigators to take the time to “step back to assess all field observations and data that have been collected at any given point to determine or postulate potential causes.” This cannot be overemphasized as inexperienced or less professional service providers frequently want to solve problems using their skill set or with products in their in-

ventory. In fact, during a pause point there may be cause to cease the investigation and call in another specialist.

In part this is the reason the Standard states, “Implementation of procedures given in this standard requires the investigator (or investigative team) to have adequate background in several areas: general principles of IAQ; interviewing techniques; building design and construction practices; basic understanding of heating and cooling systems and appliances; use of IAQ measurement equipment; interpretation of IAQ data; and technical report writing.”

One of the areas of concern I have for the Standard has to do with its suggestion that investigators, “could benefit from a review of existing medical records.” Whilst in the hand of the right person this may be a true statement, it is impossible to imagine how someone without a medical background and the obligatory ethics could or should be in possession of someone’s medical records. How this passed through the ASTM committee is as much of a mystery for me as Ross Perot or Donald Trump running for the presidency.

Despite this glaring inclusion, it does recover by bringing awareness to the hazards investigators can be exposed to during an investigation. The chemicals, varnishes, paints and fuels that people store in unmarked containers, along with clothes and bedding contaminated with mould, rodent and insect feces and bacterial contaminants found in bathrooms and kitchens and bedrooms, are all sufficient to call in public health officials. Those circumstances are not the place for someone who just wants to upgrade an air filtration system regardless of its benefits.

However, if the IAQ concern is based upon occupant-based odours and particulate or visible signs of soot or back drafting then it is likely the health authorities can stay home and the filter catalogue and combustion and pressure instruments can come out.

It is not possible to cover all the potential opportunities afforded to the IAQ industry in this space. Filtration solutions, humidity control, combustion analysis, air flow, velocity, duct leakage and system balancing, along with thermal comfort complaints of draft, inconsistent temperatures and cold floors are routine service call issues.

To move into the IAQ industry and beyond what is currently in your technicians’ skill sets, and beyond the capability of the products and tools found in your service vans, you need to start your own education program.

Begin with a study of ASTM D7297.

Though the document is an invaluable resource for identifying potential causes (what to look for) and can be used as the basis for recommending corrective measures, it is not a “how to correct” guide. Such corrective measures ultimately lay in the hands of the practitioner based on his or her experience and skills.

Robert Bean, who is president of Indoor Climate Consultants Inc., is a registered engineering technologist in building construction through the Association of Science and Engineering Technology Professionals of Alberta and a professional licensee in mechanical engineering through the Association of Professional Engineers, Geologists and Geophysicists of Alberta. He has served two terms as an ASHRAE distinguished lecturer, serves on ASHRAE committees TC 6.1 (Hydronics), TC 6.5 (Radiant), TC 7.4 (Exergy) and SSPC 55 (Thermal Comfort) and is a recipient of ASHRAE’s Lou Flagg Award.

1 ASTM

D7297-14, Standard Practice for Evaluating Residential Indoor Air Quality Concerns, ASTM International, West Conshohocken, PA, 2014, www.astm.org HPACMAG.COM

OCTOBER 2015 | HPAC

73

CALENDAR RSES Canada November 6-7 RSES Canada AGM Conference will be held in Etobicoke, ON at Humber College’s North Campus.

www.rsescanada.com

Greenbuild International Conference & Expo November 18-22

MCA Canada’s 74th Annual National Conference November 16-19

CIPHEX Roadshow November 18

The Mechanical Contractors Association of Canada will hold its 74th Annual National Conference at the Omni Rancho Las Palmas Resort and Spa in Palm Springs, CA.

The CIPHEX Roadshow will make a stop in St. Johns, NL on November 18.

www.ciphexroadshow.ca

www.mcac.ca

Construct Canada December 2-4

2016

2015

FOR THE LATEST EVENT NEWS, SEE HPAC'S NEWSLETTER @ HPACMAG.COM

Kitchen and Bath Industry Show (KBIS) January 19-21

Greenbuild, the world’s largest green building annual conference and expo, will take place in Washington, DC. Venue TBA.

The 27th annual event will be held concurrently with PM Expo, HomeBuilder & Renovator Expo and Concrete Canada in the South Building, and Construct International and IIDEXCanada in the North Building of the Metro Toronto Convention Centre.

www.greenbuildexpo.org

www.constructcanada.com

ASHRAE Winter Conference January 23-27

AHR Expo January 25-27

ACEEE, 2016 Hot Water Forum February 21-23 2016

The 2016 Winter ASHRAE Conference will take place at the Hilton Orlando, FL.

The International Air-Conditioning, Heating, Refrigerating Exposition is being held at Orange County Convention Center in Orlando, FL.

www.ashrae.org

www.ahrexpo.com

The ACEEE Hot Water Forum (HWF) is dedicated to making water hot, distributing it with low losses, and using water with efficient fixtures and practices.

Portland, OR.

The 2016 Kitchen and Bath Industry Show, in conjunction with the National Kitchen and Bath Association (NKBA), will take place at the Las Vegas Convention Center.

www.kbis.com

www.aceee.org

CMPX March 16-18 The Canadian Mechanical & Plumbing Exposition (CMPX), Canada’s national show for the mechanical industry, will take place at the Metro Toronto Convention Centre in Toronto, ON.

National HVAC/R Educators and Trainers Conference March 21-23 The 2016 National HVAC/R Educators and Trainers Conference will be held at the South Point Hotel in Las Vegas, NV.

MEET 2016 May 18-19 MEET - Mechanical Electrical Electronic Technology 2016 will take place at the Moncton Coliseum Complex in Moncton, NB.

www.meetshow.ca

www.hvacexcellence.org

Cleanerheat June 16-18

CIPH ABC June 26-28

HRAI Annual Meeting & Conference August 24-26

The Canadian Oil Heat Association’s 33rd annual Symposium is being held in Charlottetown, PE, at the Delta Prince Edward.

The Canadian Institute of Plumbing & Heating will hold its annual business conference at the Banff Springs Hotel in Banff, AB.

The Heating, Refrigeration and Air Conditioning Institute will hold its 48th annual meeting and conference at the Hyatt Regency in Calgary, AB.

www.cleanerheat.ca

www.ciph.com

www.hrai.ca

Sustainable Built Environment September 19-20, 2016

CIPHEX West 2016 November 2-3, 2016

The international Sustainable Built Environment conference series offers a seminar program, presentations of regional policy papers, and features a small number of commercial exhibits. It will be held in Toronto ON.

The 30 000 sq. ft. tradeshow will be held at the Vancouver Convention Centre.

www.sbcanada.org

www.ciphexwest.ca

2017

www.cmpxshow.com

ISH March 14-18 The world’s biggest showcase for innovative bathroom design, energy efficient heating and air-conditioning technology will be held at Frankfurt am Main, Germany.

www.ish.messefrankfurt.com

Planning an event?

Send the details to Beth McKay, Assistant Editor BMckay@hpacmag.com HPACMAG.COM

OCTOBER 2015 | HPAC

75

< TECHNOLOGY

Connecting for the Internet of Things Building premieres in Toronto

T

By Beth McKay

Ryan Sen, director, sales support, Distech oronto hosted the Connecting for the Controls, said that IoT buildings will be able to Internet of Things Building conference in detect a person’s presence through their mid-September. Speakers at the informasmartphone. For example, people will be able tive networking event discussed subjects to set their offices to a temperature that suits surrounding the importance of moving towards IoT them from their phone, and emergency procebuildings. Distech Controls, AcuityBrands and dures will be sent to personal devices showing Periscope sponsored the event, and representathe best route to evacuate an IoT building for tives from these companies said that connectivity each specific person. within buildings is key to successful work spaces David Kobayashi, technical “This is not magic,” said Sen, “Imagine a of the future. manager and national building that can predict a problem before an “The internet of things is not something you practice leader, with Modern Niagara, presents occupant even realizes something is wrong.” can buy,” said David Kobayashi, technical man- his session From Now to Custom buildings are the easiest to fit with an ager and national practice leader, Modern the Internet of Things.

IoT technical backbone network, however, retNiagara. “You buy things, then you connect them, and it is only then that things start happening,” he said, sug- rofit options are possible and users should not shy away gesting that IoT buildings rely upon a foundation of intercon- from hybrid configurations.

The Connecting for the Internet of Things Building confernected channels between people and smart devices.

Trevor Palmer, vice president, products and marketing, ences are immersive, half-day events custom-designed for Distech Controls, further explained this ideal and said that building owners, property managers, architects and conunifying systems within a building saves money and time. sulting engineers, who are on the lookout for leading soluHe noted that moving towards a holistic network is forward tions. Additional conferences were held in Chicago, Boston, thinking, and in the near future the well being of occupants New York, San Francisco, Washington and Atlanta. www.iot-building.com within a building will be of the utmost importance.

TRAINING

EDUCATIONAL OPPORTUNITIES ACROSS CANADA LEED Canada

Canadian Hydronics Council

Canada Green Building Council workshops include LEED Green Associate Exam Preparation, Net Positive Energy Buildings and Introduction to the LEED-v4 Rating System, tel. 866.941.1184.

The Art of Hydronic Fundamentals course is a starting point for those interested in installing hydronic-heating systems. The Essentials of Hydronic System Design intermediate level program helps practitioners understand key design principles and the different options and solutions required to meet client needs. Course descriptions and training schedules are available online. www.ultimatecomfort.ca

www.cagbc.org

HRAI SkillTech Academy SkillTech Academy, the Education Division of the Heating, Refrigeration and Air Conditioning Institute of Canada (HRAI) offers a variety of residential and commercial courses for the advancement of its members’ business and technical excellence. For more information, contact Dorothy Allen by e-mail: dallen@hrai.ca.

www.hrai.ca/skilltechtraining.html

Energy Management The Office of Energy Efficiency at Natural Resources Canada has workshops in cooperation with Langara College in BC, some of which lead to an energy management certificate.

www.langara.bc.ca

www.oee.nrcan.gc.ca

Construction Education Council courses

TECA Quality First Training

The Construction Education Council offers a number of management and supervisory courses across Canada through webinars and classroom settings. For more information, e-mail education@mcac.ca.

TECA’s respected Quality First training programs are developed by the industry, for the industry, setting minimum standards for the residential and light commercial heating, ventilating and cooling trade in British Columbia. Courses provide contractors the information they need to install equipment that operates safely and comfortably at rated efficiencies. www.teca.ca

www.constructioneducation.ca

NAIT The North Alberta Institute of Technology is offering a Hydronic Designer Core I (HDRO370) continuous intake distance learning course. Students have nine months to complete six modules: heat, boilers, heat loss, blueprint reading, building construction and system design factors.

SEE THE CALENDAR ON P75

www.nait.ca/course_hdro370.htm 76

HPAC | OCTOBER 2015

HPACMAG.COM

THE SOURCE

ADVERTISERS IN THIS ISSUE Adrian Steel......................................................

www.AdrianSteel.com........................................................ page 53

AHR Expo............................................................ www.ahrexpo.com.......................................................... page AquaTech.....................................................

63

www.aquatech-canada.com.................................................... page 36

Bacharach....................................................... www.MyBacharach.com...................................................... page

20

Bardon Supplies............................................... www.bardonsupplies.com..................................................... page

61

Bibby Ste-Croix................................................... www.thequietpipe.ca.................................................. page

44, 45

Brant Radiant Heaters......................................... www.brantradiant.com....................................................... page

62

Caleffi..................................................................www.caleffi.com............................................................ page

37

CMPX.................................................................www.cmpxshow.ca.......................................................... page

74

Delta.......................................................

www.deltacommercialfaucets.ca................................................ page 15

FF Systems Inc..................................................... www.ffsystems.ca........................................................... page

10

Ford........................................................................www.ford.ca............................................................... page

47

Franklin Electric...................................................www.littlegiant.com......................................................... page

28

Fujitsu............................................................ www.fujitsugeneral.com...................................................... page

65

Giant.................................................................. www.giantinc.com............................................................ page Heatlink.............................................................. www.heatlink.com.......................................................... page

17

Hilmor....................................................... www.hilmor.com/thermometer................................................... page Honeywell Genetron.....................................www.honeywell-refrigerants.com.......................................... page

6 7

11, 67

Hood Chemical.................................................www.hoodchemical.com...................................................... page

38

ICP................................................................. www.GoKeepRite.com........................................................ page

21

IESO........................................................www.saveonenergy.ca/business................................................ page

71

Industrial Refrigerated Systems................................... www.indref.ca.............................................................. page

64

Insulation Solutions....................................... www.insulationsolutions.com.................................................. page

38

IPEX...................................................................www.ipexinc.com..................................................... page

27, 79

Lennox PartsPlus...........................................www.lennoxpartsplus/HPAC................................................... page Liberty Pumps..................................................

55

www.libertypumps.com....................................................... page 13

M&G Duravent......................................................www.duravent.com.......................................................... page Master Group.........................................................

14

www.master.ca............................................................. page 43

Napoleon..............................................www.napoleonheatingandcooling.com.............................................. page

5

Navien................................................................. www.Navien.com........................................................... page

25

NTI................................................................... www.ntiboilers.com......................................................... page

39

Ostberg...........................................................http://ca.ostberg.com....................................................... page

46

Saniflo...................................................................www.saniflo.ca............................................................. page

33

Selkirk...............................................................

www.heatfab.com........................................................... page 23

Switch the â&#x20AC;&#x2DC;Stat................................................. www.switchthestat.ca....................................................... page

46

Uponor..................................................................www.uponor.ca............................................................. page

41

Viega.....................................................................www.viega.us.............................................................. page

29

Viessmann..........................................................www.viessmann.ca............................................................ page Watts.................................................

HPACMAG.COM

2

www.OneWattsWater.com/waterquality........................................... page 80 OCTOBER 2015 | HPAC

77

< PLUMBING

Cross Connection Control Bad And Ugly Photo Contest wrap up

I

n the world of potable water protection and backflow prevention, a certified specialist tester or inspector will find cross connections that are controlled, and in too many cases, a bad cross connection with no control.

In a bid to address problem installations and improve education, the Western Canada Section American Water Works Association Cross (WCSAWWA) Connection Control Committee (CCC) launched its Bad and Ugly contest in 2014.

The 2014-2015 Bad and Ugly backflow contest received an enthusiastic response with 20 entries and the winners were recently announced. The WCSAWWA Cross Connection Control Committee judged the photo submissions. Three winners from across Canada were each presented with tools, compliments of Conbraco Industries, Watts Canada and Zurn Industries.

Organizers are now calling for entries for the 2015-2016 contest. The WCSAWWA offers the following considerations for photo entries:

> Device selection > Hazard application > Device installation and orientation > Device height and access for testing > Device drain or lack of drain > Tag or no tag, test cock plugs or no plugs > Using test cocks for other purposes > Device or assembly broken up > Poor plumbing practices, supports, connections and others Entries must be received by April 1, 2016. Submission categories are active tester in the field and cross connection control inspector/regulator. Prizes will be awarded in May 2016. www.wcsawwa.net 78

HPAC | OCTOBER 2015

Doug Kaupp (l), general manager — water, waste water and storm water, City of Lethbridge and Graeme Dennis (WCSAWWA CCC member), cross connection control officer, environmental utilities, The City Of Medicine Hat (r), with Watts pressure differential gauge winner Clint Patrick. Patrick is a plumber with DMT Mechanical Ltd. in Lethbridge, AB.

The flushometer was installed incorrectly with the critical level ignored.

The waterline was repiped to raise the flushometer to the proper height.

Dylan Gerlack of EPCOR (WCSAWWA CCC member) presents Simon Jolly of Edmonton, AB, with a Zurn pressure differential gauge for his winning entry.

Eric Gagnier, chief plumbing inspector for la Régie du bâtiment du Québec (RBQ) presents an Apollo backflow prevention test kit to Nathalie Quevillon, training director at the Corporation des maîtres mécaniciens en tuyauterie du Québec (CMMTQ).

This photo was taken at a morgue in a hospital.

You can see the cross connections at the morgue’s table. There is also a sink in the same room with a disposer to grind body parts. There was a direct potable water connection to it.

This is an example of irrigation devices where the contractor used the hose bibs to blow out the water from the device and main before wintertime. This could cause some serious issues as compressors normally run anywhere from 100-120 psi and can push air back up the water main if it is not isolated from the city main. Other concerns include maintenance staff attaching a hose to water grass, and so on. We have no choice but to offer to remove the hose bib and cap the line (or preferably remove the tee altogether).

HPACMAG.COM

Avoid UNCERTAINTY and GO with the

PROVEN SYSTEM SOLUTION,

SYSTEM 636® BY IPEX PR

O U D LY M

A

Fully Certified to ULC S636

•

System 636 PVC is rated for flue gas temperatures up to and including 65ºC

•

System 636 CPVC is rated for flue gas temperatures up to and including 90ºC

•

Manufactured and supported by piping system experts

•

Installer training is available focusing on proper solvent welding and other installation aspects

A

DE

•

I

System 636 Flue Gas Venting provides a complete product offering to get the job done on time and to the finished quality customers need.

N

CANAD

Please visit ipexinc.com/system636 or call 866-473-9462

Products manufactured by IPEX Inc. System 636® is a trademark of IPEX Branding Inc.

Water the Way You Want It

Years of Innovation Since 1874

Celebrating 140 Years of Excellence & Leadership

Our companies have been helping you filter, condition, and test water for 140 years. Weâ&#x20AC;&#x2122;re the smart one-stop choice for a complete suite of water quality solutions.

Learn more at OneWattsWater.com/waterquality