Modern Hydronics Fall 2021

MODERN HYDRONICS 2021 FALL

WAREHOUSE IN-FLOOR INSTALLATION SIZING PANEL RADS FOR LOW WATER TEMPS

SWEET HEAT 2021 This year’s contest-winning projects

PLANNING MULTI-ZONE LAYOUTS BOILER CHEMISTRY CONSIDERATIONS

a publication of

It’s easy to spot why Navien will be the best selling condensing tankless.*..again 2'' PVC up to 75 feet and 1/2'' gas up to 24 feet

*Navien NPE Series is the best selling condensing tankless water heater according to BRG.

High efficiency – up to

0.96 UEF and up to

15:1 TDR

Durable dual stainless steel heat exchangers

ComfortFlow NPE-A2 internal buffer tank and recirc pump ®

Optional NaviCirc - easy to install with no recirc return loop needed TM

EZNav multi-line control with built-in intuitive software TM

Built-in HotButton on-demand capability

TM

New Navien NPE-2

High efficiency condensing tankless water heaters The best just got even better To learn more visit NavienInc.com Navien Canada is now a proud strategic partner of

The leader in condensing technology...does it again.

STRATEGIC PARTNERS

CONTENTS

Modern Hydronics

MH20 DESIGN Water Works

The new headquarters for the Toronto and Region Conservation Authority will showcase its mechanical system.

By Doug Picklyk

MH22 IN-FLOOR

In-floor Provides Reliable Storage

MH4 AWARDS

Radiant heating used for temperature and condensation control in agricultural fertilizer warehouse.

Sweet Heat Awards 2021 Celebrating the top residential and commercial entries in HPAC Magazine’s first-ever Sweet Heat hydronics installation competition.

By Logan Caswell and Doug Picklyk

MH24 HEAT PUMPS

Cut it Out with the Cut-Out Questions

MH10 PIPING

Old ways of thinking are not compatible with a low carbon future.

By Chris DesRoches

Zoning Considerations What to think about when planning your system layout.

By John Siegenthaler

MH26 PRODUCT SHOWCASE MH28 EMMITERS

MH14 BOILERS

Optimizing Boiler Chemistry

Adjusting for Conditions

In this edition of 30 Mechanical Minutes panelists review why maintaining proper water chemistry is essential with modern boiler systems.

By Logan Caswell

How to size panel radiators for low water temperatures.

By John Siegenthaler

MODERN HYDRONICS

a supplement of Heating Plumbing Air Conditioning Magazine

111 Gordon Baker Road, Suite 400, Toronto, ON M2H 3R1 TEL: 416.442.5600 FAX: 416.510.5140 www.hpacmag.com

EDITOR ASSOCIATE EDITOR ASSOCIATE PUBLISHER ACCOUNT COORDINATOR MEDIA DESIGNER CIRCULATION MANAGER PUBLISHER COO

WWW.HPACMAG.COM

HPAC Magazine receives unsolicited materials (including letters to the editor, press releases, promotional items and images) from time to time. HPAC Magazine, its affiliates and assignees may use, reproduce, publish, re-publish, distribute, store and archive such unsolicited submissions in whole or in part in any form or medium whatsoever, without compensation of any sort.

Doug Picklyk (416) 510-5218 DPicklyk@hpacmag.com Logan Caswell (416) 728-6209 LCaswell@hpacmag.com

NOTICE: HPAC Magazine, Annex Business Media, their staff, officers, directors and shareholders (hence known as the “Publisher”) assume no liability, obligations, or responsibility for claims arising from advertised products. The Publisher also reserves the right to limit liability for editorial errors, omissions and oversights to a printed correction in a subsequent issue. HPAC Magazine’s editorial is written for management level mechanical industry personnel who have documented training in the mechanical fields in which they work.

Manufacturers’ printed instructions, datasheets and notices always take precedence to published editorial statements.

David Skene (416) 510-6884 DSkene@hpacmag.com Kim Rossiter (416) 510-6794 KRossiter@hpacmag.com Emily Sun esun@annexbusinessmedia.com

Contents Copyright © 2021 by Annex Publishing & Printing Inc. may not be reprinted without permission.

Urszula Grzyb (416) 442-5600, ext. 3537 ugrzyb@annexbusinessmedia.com Peter Leonard (416) 510-6847 PLeonard@hpacmag.com Scott Jamieson

We acknowledge the financial support of the Government of Canada through the Canada Periodical Fund (CPF) for our publishing activities.

Proud member of:

MODERN HYDRONICS

FALL 2021

MH3

SWEET HEAT

SWEET HEAT AWARDS 2021 Celebrating the top residential and commercial entries in the first-ever Sweet Heat hydronics installation competition.

BY LOGAN CASWELL AND DOUG PICKLYK

L

aunched in late fall 2020, the first ever Canadian Sweet Heat Installation contest called on hydronic contractors from across the country to share photos of recent projects and explain the challenges and creative solutions their teams used to deliver comfort to their clients.

The installations could be in a new-build or a retrofit project, and it needed to be a Canadian contractor and a Canadianbased project. The community answered the call, and the competition received 31 entries from Victoria, B.C. to Bridgewater, Nova Scotia. The entries were divided into two categories (commercial and residential) and the final judging was performed by experts, John Seigenthaler and Robert Bean, who together bring 80 years of industry experience.

The winners and first runners-up in both categories were first revealed during the final session of the 2021 Modern Hydronics Summit, held online on March 30 and 31.

RIVERDALE PLUMBING First, our congratulations go to Riverdale Plumbing in Toronto for taking first place in the residential category for a modern custom home project located in the prestigious Forrest Hill area of Toronto.

Riverdale is a small family-owned company formed in 1974 and specializes in new build and retrofits, specifically in-floor heat, air handlers, hot water generation and snow melts.

The company's operations manager, Pierce Akins, explained some challenges the company faced with this award-winning project. “We had to redesign the hydronic system so it could physically fit based on the limited space we were given to build our heating stations throughout the house,” said Akins.

“We used modulating pumps instead of fixed-speed pumps to save more energy and save space.”

Akins said he has seen an increased demand for hydronics in his business, especially in the high-end new builds in and around Toronto where the new designs present challenges to heat with traditional equipment.

On this project Akins explains how they changed the design from the original drawings of two large boilers to five smaller units. “It gave us the advantage of lower modulations while also meeting the higher loads once they all fire up together.

MH4

FALL 2021

Winner in the residential category, this custom home project was completed by Riverdale Plumbing in Toronto.

The Riverdale Plumbing project used modulating pumps instead of fixed-speed pumps to save energy and space.

MODERN HYDRONICS

WWW.HPACMAG.COM

Modern Hydronics

Winner of the commercial category; this is the mechanical room located in the basement of UBCO Nechako residence completed by Rambow Mechanical located in Kelowna, B.C.

Doing this we could get down to 40,000 Btus, which allowed us to save energy and use the boilers as effectively as possible.”

The boilers were installed to provide heat for two indirect hot water tanks, a large snow melt, indoor spa, outdoor spa, outdoor pool and supplementary heat (in-floor heat and heating coils) to the building. The primary heat for the building is provided by heat pumps.

Contest judge, Robert Bean, gave the Riverdale Plumbing project his vote for the top spot because the of its energy-saving efficiencies. “What I liked about this project was given the size of the loads, they used the least amount of electrical power to move the thermal energy through the building.”

Co-judge, John Seigenthaler concurred, adding that the untold story of hydronics is about judging the quality of a system by looking at both the energy consumed to produce the heat and the energy used to move it through the building.

Seigenthaler also admired the use of valves rather than zone circulators which use less electricity as well as the beautiful workmanship, well thought-out design, modern technology and well-placed hardware from a servicing standpoint.

“From an energy standpoint, the use of a variable speed pressure-regulated circulator combined with valves is definitely going to use less energy,” said Seigenthaler. “A lot of preplanning went into this relatively small space in a very large home.”

The mechanical room is tied into a centralized campus lowtemperature district energy system (LDES).

500-seat dining hall, commercial kitchen and amenity spaces on bottom two floors.

Patrick Waunch, president and CEO of Rambow Mechanical, founded the business in 1985. Today, the firm specializes in industrial and commercial projects filling a niche throughout Western Canada with a regular team of around 45 people. “I enjoy a challenge,” says Waunch, who has over 50 years of experience in the commercial and industrial mechanical sector.

For this project, which lasted about two years, the building is tied into a centralized campus low-temperature district energy system (LDES). Heat pumps located in the Nechako building use water-to-water heat recovery for maximum efficiency when both heating and cooling are required. Two 8-in. stainless steel connections, which connect to two heat exchangers, provide an effective heat surface of 386 sq.m. per heat exchanger. This allows the system to both draw heat or reject heat back into the system.

The heat pumps send either hot or chilled water through a network of 6-way control valves that, in conjunction with a large number of thermostats, allow various fan coils, unit heaters and in-slab heating/cooling. The in-slab heating is located in the common restaurant area and unit heaters are located in main doorways and loading dock areas.

All of the pumps in the system have variable speed drives on them, ramping up and down driven by controls. In addition to the complex heating/cooling system, all the student room windows have a built-in contact sensor, monitored by a direct digital control (DDC) system, so when the window is opened the DDC is programmed to shut down the heating/cooling for energy savings. When the window is closed the DDC reactivates the fan coil in the room to its previous program.

“We had to redesign the hydronic system so it could fit.”

RAMBOW MECHANICAL The top entry in the commercial category was awarded to Rambow Mechanical of Kelowna, B.C. This new construction project, the Nechako residence, is part of the UBC Okanagan housing commons in Kelowna. The building itself is a 137,000 sq. ft. six-storey residence with some 220 bedrooms and a WWW.HPACMAG.COM

MODERN HYDRONICS

Continued on MH6 FALL 2021

MH5

SWEET HEAT

Modern Hydronics

2021 SWEET HEAT ENTRIES

Thank you to everyone who took the time to enter our first Sweet Heat Contest: Air Design Services, London, ON AV Mechanical, Caledon, ON Battye Mechanical, Peterborough, ON Boss Plumbing, Saskatoon, SK Canadian In-Floor Radiant Solutions, Burlington, ON Canuck Mechanical, Prince George, BC Deer Bridge Plumbing & Heating, Calgary, AB Denrite Mechanical, Sturgeon County, AB Doyle Plumbing Heating & Cooling, Fraserville, ON Gleeson Plumbing, Moorefield, ON Good Grade Plumbing & Gas, Victoria, BC Grand Mechanical Solutions, Brantford, ON GTAHeat.ca, Vaughan, ON JJM Mechanical Group, Burnaby, BC John Sadler Plumbing & Heating, Surrey, BC Lloyd HVAC Services, Toronto, ON Mason Place, Keswick, ON MICA Energy Solutions, Oshawa, ON Micon Plumbing, Mississauga, ON Northern Air & Mechanical Systems, Sudbury, ON Parr Mechanical Plumbing & Heating, St. Pauls, ON POC Plumbing & Heating, Oakville, ON Pre-Con Builders, Oakbluff, MB Pro Climate Mechanical, Concord, ON R4 Mechanical Systems, Wetaskiwin, AB Rambow Mechanical, Kelowna, BC RBA Mechanical, Edmonton, AB Rhynos, Bridgewater, NS Riverdale Plumbing, Toronto, ON TJL Mechanical, Fergus, ON TT Plumbing & Heating, King City, ON

Commercial installation runner-up, Grand Mechanical

Runner-up in the residential category, Denrite Mechanical

Another energy-saving element is the heat recovery system that captures heat from exhaust fans and the commercial kitchen range hood using an energy recovery ventilator (ERV) and repurposing that energy back into the HVAC system.

The heating system also aides the domestic hot water.

“Once our heating side returns back from the system it runs through a heat exchanger that tempers the incoming domestic cold water, so when you have low loads situations for heating you gain a lot of benefit from this second heat exchanger taking heat out of the heating system,” says Shayne Haller, project manager with Rambow Mechanical.

According to Wauch and Haller, working to the LEED Gold certification requirements on this project meant sourcing local materials that met the low environmental impact specifications (including cements, sealants, etc.). “A lot of paperwork and effort is required to satisfy the LEED certifications,” says Waunch, a process which is becoming a more common practice on all of their projects.

The Sweet Heat contest judges applauded the certification MH6

FALL 2021

requirements of the project. “I really liked the attention to the low temperatures in the heating, and that just makes the systems operate at their peak efficiency,” said Bean.

Siegenthaler added, “It really looked like they were taking advantage of opportunities to minimize energy use and use systems that work with good attention to the exergy concept.

As we move towards decarbonization, here’s a hydronic system that does a good job of recognizing that electrical-based systems and low-temperature systems are going to be the new normal in hydronics.”

“When we talk about the challenges we had, we also went through the Covid-19 scenario,” adds Waunch. “We had to maintain manpower, but we were very fortunate to be able to have people come in and out and have not one single case of Covid on-site.”

In all, the residence project lasted about a two-years for Rambow Mechanical, and it’s anticipated that the building will be full of students this fall.

MODERN HYDRONICS

Continued on MH8 WWW.HPACMAG.COM

DO MORE WITH LESS Cover 90% of your residential circulator needs with the ALPHA2 15-55 and ALPHA2 26-99.

ALPHA2 15-55 with line cord ALPHA2 15-55 with terminal box

ALPHA2 26-99 with terminal box

ALPHA2 – Delivers comfort and savings to your customers for years to come. Install our most efficient variable speed ECM circulator with patented AutoAdapt function.

CROSS REFERENCE CHART

ALPHA2 15-55

ALPHA2 26-99

Grundfos

TACO

Bell & Gossett

Armstrong

Wilo

UPS 15-58F/FR UPS-15-42F/FR UP15-10F UP15-42F

005 006 007 008 0010 0015 00R-IFC 00R-MSF1-1FC 007E 0015E 0018E

NRF-22 NRF-25 NRF9F/LW ECOCIRC 19-14 LR-20WR

ASTRO 30 ASTRO 50-3 ASTRO 25 ASTRO 30-0 ASTRO 20 ASTRO 230CI-R

STAR S 16FX STAR S 21FX STAR S 21RFC STRATOS ECO 16 RFC

0010 0011

NRF-36 SP#2 NRF-45 SP#2 SERIES 100 PL-30 PR NRF-36SP#1 NRF-45SP#1 LR-15BWR

E7(B) ASTRO 50(B) H41 ASTRO30(B) ASTRO 250CI-R

STAR 30 F STAR 32 F STAR 33 FC

UPS 26-99F

TO LEARN MORE, VISIT

grundfos.ca/HPACad2021

SWEET HEAT RUNNERS UP The runner-up spot in the residential category was awarded to Denrite Mechanical of Sturgeon County, Alberta. This home had a mechanical system which, according to Bean, “needed some therapy.”

Bean said he awarded the runner-up prize because of Denrite’s design and installation, particularly their attention to low-temp return temperatures.

“In order to get the maximum amount of work out of a boiler you need to get those temperatures down to 75-80F return water temperature. The only way to do this is to oversize the heat exchangers on the air handlers,” said Bean.

The project was also commended by Seigenthaler for its workmanship and design. “I gave a good rating for their ability to integrate that much hardware into the small space and yet keep accessibility for servicing,” said Seigenthaler.

FALL 2021 MH8 HPAC_ArcticHeat_Aug21.indd 1

Modern Hydronics

SWEET HEAT 2022

We are now inviting hydronics professionals across the country to get out your cameras and do it all over again.

Sweet Heat 2022 launches now, so if you take great pride in the work your team is doing and have new installation projects that are worth talking about (either new build or retrofits), it’s time to bring it on!

The entry process is simple, and you’ll find all the entry details at hpacmag.com/sweet-heat-2022 and maybe you’ll be our feature story next year.

Good luck to all.

Grand Mechanical Solutions of Brantford, Ontario was the runner-up in the commercial category. Their project was a new build facility for a landscape equipment supplier. The building included over 30,000 sq.ft. of radiant in-

MODERN HYDRONICS

floor heat and snow melt among the showroom, offices, service shop and underground garage. “I liked the application of multiple boilers staged, instead of putting one large device in,” says Bean. For Siegenthaler: “It was a good use of modern piping materials, and ECM circulators," and he appreciated how the controls were well separated from anywhere water could affect them.

Both judges were impressed with the quality of workmanship in all entries, but are always looking for how contractors use engineering principles which promote energy efficiency and compliance with standards. “When it comes to energy, conserve it first,” says Bean.

Their recommendations to future entrants is to demonstrate how you made your systems efficient, and where possible identify what standards you are meeting to provide comfort to your clients. <>

WWW.HPACMAG.COM

2021-08-04 3:47 PM

Some just see a blueprint.

You see a chance to grow your business.

Y

our business is all about cash flow, project performance and planning, going big too soon, having the best people, innovating and working with partners that really want to help you grow your business.

Your business needs innovative partnerships that incorporate the newest product technologies and digital tools — reliable

brands that make things better. That’s why AQUATECHTM is proud to offer Lochinvar® heating and hot water boiler solutions that perform for you and your customers.

Energy efficiency. Quality performance.

Broad product selection. And technical support.

Call us today and explore how our over 40 years of experience can support you.

Represented by

Aqua-Tech Sales and Marketing Inc. P: 905.631.5815 • F: 905.637.8655 • aquatech-canada.com

ZONING

Modern Hydronics

ZONING CONSIDERATIONS Things to consider when planning your piping layouts.

BY JOHN SIEGENTHALER

A

zone is any area of a building for which indoor air temperature is controlled by a single thermostat (or other type of temperature controller). A zone can be as small as a single room, or it may be as large as an entire building.

Multi-zone systems have the potential to provide two important benefits not available in single zone systems, namely: • The ability to meet individual comfort requirements through independent control of room temperature • And, the ability to conserve energy by reducing the temperature of unoccupied zones and thus the rate of heat loss from them.

Multi-zone hydronic systems are easy to create, much easier than their forcedair counterparts, and several hardware options exist for implementing zoning in different types of distribution systems.

However, before attempting to layout a zoned distribution system it’s important to evaluate how zoning can best be implemented in the building. The goal is to maximize the benefits of zoning while at the same time keeping the system affordable, energy efficient, reliable and as simple as possible.

AVOID OVERSELLING In some cases, hydronic zoning has been “oversold.” For example, potential clients, and even some heating professionals, sometimes think that the more zones a system has the better it is designed.

This is not true. Just because it is possible to create a separate zone for every room does not mean it is the best choice.

MH10

FALL 2021

In some cases, the extra piping and control hardware necessary for roomby-room zoning adds complexity and cost without returning tangible benefits.

Dividing a system into an excessive number of zones may even create operational problems such as heat source short-cycling. It can also add to system maintenance requirements, again without returning any benefit to the owner.

Here are several factors designers should consider when deciding how to best implement zoning.

THERMAL MASS Some people assume that zoned systems are somehow able to lower the temperature of a room (or group of rooms) down to some setback temperature as soon as the thermostat is turned down. Likewise, they might assume that any given room will quickly warm back to normal occupied temperatures as soon as the thermostat is turned up.

No occupied space can undergo a drop in temperature of several degrees over one to two minutes simply by stopping heat input. Similarly, no practical heating system can instantly raise the temperature of an occupied space by several degrees. The time required to cool down or warm up a zone is significantly affected by the thermal mass of the heat emitter(s), and the building itself.

The greater the thermal mass of the heating system and building components, the slower the decrease in indoor temperature when heat input to the zone stops. This is illustrated in Figure 1.

The two curves shown represent combinations of rooms and their associated heat emitter(s) with significantly different thermal masses. The room with low thermal mass could be a typical woodframed residential room with fin-tube MODERN HYDRONICS

Figure 1. Variables effecting heat loss

baseboard or perhaps a fan-coil as the heat emitter. The room with high thermal mass could be the same room, but equipped with a 4-in. thick heated floor slab as its heat emitter.

A very well insulated room (or an entire building) with high thermal mass might only experience a temperature drop of 3F to 5F over a cold midwinter nighttime lasting 8 to 10 hours, even with its heating system completely off.

If the occupants reduced the thermostat setting from 70F to 60F at night, the inside air temperature would not decrease to the reduced setpoint before morning. The energy savings potential of such a situation is very limited. If the thermostat were turned down 10F or even 20F, the results would be the same.

The thermal mass of the heat emitter also affects the recovery period when the setback ends. Low thermal mass heat emitters such as finned-tube convectors can usually restore a room that has been set back 10F to normal comfort in perhaps 15 to 30 minutes.

High thermal mass systems such as a heated concrete slab-on-grade floor can take several hours to bring a space back to normal comfort temperature following Continued on MH12 WWW.HPACMAG.COM

ZONING a prolonged setback period. This is illustrated in Figure 2, which shows the simulated heating of both medium-mass and high-mass radiant floor panels, starting at an initial temperature of 60F, and having a sustained heat input rate of 60,000 Btu/h.

It’s important not to use heat emitters having significantly different thermal mass in the same zone when that zone will operate with frequent changes in setpoint temperature. Because their response times during both cool down and warm up are so different, neither type of heat emitter is likely to produce acceptable comfort during the transition periods between stable setpoint temperatures.

It’s also important to realize that the energy conservation potential of a high thermal mass-zoned system is very dependent on the duration of any reduced thermostat setting.

If a zone can be maintained at a reduced temperature for several days, the energy conservation potential can be significant. However, attempting to create significant temperature changes on a daily basis in zones with high thermal mass heat emitters is futile.

The energy savings will be very small and the potential for temperature overshoot and undershoot will be significant.

This characteristic should be explained to eventual owners who may not understand how high-mass systems respond to changes in the thermostat settings.

HEAT FLOW TO ADJACENT ROOMS Another factor affecting zoning performance is inter-zone heat transfer. This refers to heat transfer through interior partitions as the building attempts to equalize temperature differences from one room to another.

If, for example, a particular room is kept at 65F, while an adjacent room is kept at 75F, heat will flow from the warmer to the cooler room through the wall separating them.

This partially defeats attempts to MH12

FALL 2021

Figure 2. Simulated heating of both medium-mass and high-mass radiant floor panels.

maintain temperature differences by zoning. The greater the thermal resistance of the exterior envelope of the building, the harder it is to maintain significant temperature differences between rooms separated by uninsulated interior partitions.

OCCUPANT INVOLVEMENT Another consideration that helps determine the cost effectiveness of zoning is the willingness of the occupants to regulate the system. It might seem obvious that an owner who is willing to pay more for an extensively zoned system would also be willing to regulate it. However, experience has proven that this is not always true, especially when nonprogrammable thermostats are used. Given modern lifestyles people often forget to regulate their heating systems.

Different rooms within a single zone (e.g., controlled by a single thermostat) and supplied with the same water temperature can still be maintained at different temperatures by adjusting the flow rate through individual heat emitters, assuming, that is, that these rooms are not all served by a series piping circuit. Flow balancing is usually adequate when the goal is to maintain several rooms at different (but stable) temperatures.

Room-by-room zoning is justified in situations where several rooms are to MODERN HYDRONICS

have both different and frequently changing air temperatures. It can also be justified when the added cost of room-by-room zoning is relatively small.

A good example of the latter is when panel radiators, each equipped with thermostatic valve actuators, and piped into either a homerun or “1-pipe” distribution system are used as heat emitters. These distinctions should be discussed with eventual owners before committing several hundred dollars for extensive zoning controls that may seldom be used.

INTERNAL HEAT GAINS Rooms with large south-facing windows may at times be totally heated by solar heat gains. Rooms in the same building that do not receive solar gain may still require heat input. Well-planned zoning separates rooms with likely solar heat gain from those without. It also accommodates the fact that the rooms receiving solar heat gain change over the course of the day as the sun moves.

Rooms that contain heat-producing equipment such as computers, copiers, vending machines, intense lighting or cooking facilities are usually good candidates for separate zoning.

It’s also important to use heat emitters with low thermal mass in areas subject to large and highly variable heat gain from the sun or other internal heat sources. The low-mass heat emitters can quickly start and stop heat input as necessary. This is especially important in modern buildings having very low rates of heat loss.

SLEEPING COMFORT Many people prefer to sleep in cool bedrooms. Good zoning design allows for this possibility. It’s common to zone a residential system so one or more bedrooms are controlled as a single zone.

Another common strategy is to create one zone for the master bedroom, with a separate zone for the master bathroom.

WWW.HPACMAG.COM

Modern Hydronics

This allows the bathroom to remain comfortable even when the bedroom is cool.

ACTIVITY LEVEL Exercise rooms are good candidates for separate zoning, while it’s unnecessary to maintain normal human thermal comfort conditions in spaces that are infrequently occupied—examples include basements, garages, guest rooms, and workshops. Garages, if heated, are usually maintained at air temperatures of 45F to perhaps 60F, and again are usually set up as a separate zone. In cold climates the garage zone is usually designed to operate with antifreeze. This allows the garage zone to be completely turned off, if desired, without the risk of freezing.

TRANSITORY AREAS Entry vestibules with exterior doors and

doors into fully heated space are good candidates for separate zoning.

In some cases, the goal is to maintain the vestibule at higher temperatures to help buffer interior spaces from cold air gusts when the exterior door is opened.

When floor heating is used in such high-traffic areas, the floor surface temperature is often maintained several degrees above that of other interior areas to help buffer the cold and to dry tracked-in moisture.

BLENDED SOLUTIONS These consideration should all be “weighed” when deciding upon a distribution system strategy. On some projects one or more of these considerations may not be present. On other projects some may be very dominant.

The “beauty” of modern hydronics technology is the ability to meld these considerations together in a way that enhances owner satisfaction while also providing energy efficiency and decades of reliable operation. <>

EXTERIOR EXPOSURE Rooms with minimal exterior exposure will have small heating loads relative to their floor area.

When such rooms are controlled as separate zones, overheating can be minimized. Rooms that have no surfaces exposed to the outside typically do not need heat emitters.

John Siegenthaler, P.E., is a licensed professional engineer. He has more than 40 years experience in designing modern hydronic heating systems. His latest book is Heating with Renewable Energy (see www.hydronicpros.com for more info).

MUNICIPAL

Hydronic Heat Pump Certification (MHHPC)

COURSE

For Hydronic Designers This is a must have to utilize the new TECA heatpump drawings and design projects involving air-to-water or water-to-water heat pumps.

For Hydronic Installers This is great insight into the proper sizing, operation and logic of heat pumps when utilized in a hydronic heating or cooling system

More Info

www.teca.ca Thermal Environmental Comfort Association 604.594.5956 / 1.888.577.3818 office@teca.ca

WWW.HPACMAG.COM

HPAC_TECA_August21_CSA.indd 1

MODERN HYDRONICS

FALL 2021 MH13 2021-07-28 7:24 AM

CHEMISTRY

Modern Hydronics

OPTIMIZING BOILER CHEMISTRY In this edition of 30 Mechanical Minutes panelists review why maintaining proper water chemistry is essential with modern boiler systems.

BY LOGAN CASWELL

I

n a recent installment of HPAC Magazine’s 30 Mechanical Minutes, the free webinar featuring virtual content for real world professionals, HPAC editor Doug Picklyk sat down with HPAC contributing writer Steve Goldie and Brian Morgan of The Morgan Group to discuss the merits of being proactive in dealing with water chemistry in the design, operation, and maintenance of hydronic systems. Goldie and Morgan shared their knowledge of treatment solutions and what’s important to consider in new and retrofit applications —both residential and commercial.

Although water is the optimal heat transfer medium, optimizing the water chemistry is vital in the new generation of modern boilers. Goldie, a hydronics specialist with Next Supply with more than 40-years-experience in the plumbing industry, recalled the main cause of corrosion and subsequent reduced reliability in old cast-iron boilers was oxidization due to air in the system.

The main culprit today is the quality of the water being pushed through the much narrower passageways. New technologies create hot water very quickly, and there are a lot of opportunities for scale build-up especially around the heat exchangers. This build-up can cause the heat exchanger to overheat MH14

FALL 2021

Webinar participants (top to bottom) Steve Goldie, Brian Morgan and Doug Picklyk, here discussing the important role of magnetic separators at keeping hydronic systems clean.

and fail which is a huge contrast to old cast iron systems which could be full of sediment for decades and still be functionally operational.

“Water chemistry is crucial these days,” said Goldie, “In my day, the most important component was the air separator. Now it’s not the case.” He went on to stress the importance of testing the pH of the water—even from the municipal supply—and to install a de-mineralizing cartridge which triggers an alarm to alert the owner when it needs to be replaced.

“Water quality and chemistry is something you can’t ignore anymore,” said Goldie. “It needs to be part of the regular maintenance schedule and routine of your boiler system.”

Boiler manufactures have now identified water chemistry as a catalyst for premature boiler system failures and have even made a point of nullifying their warranty if the boiler’s water supply is not maintained to their specifications.

Morgan illustrated the new best practices and recommendations issued by MODERN HYDRONICS

manufacturers which included procedures such as: • Test the water before you fill the system.

• Make sure you have air elimination in the system.

• Treat all boiler feed water as though it is hard water.

• Use chemical inhibitors on every job.

• Flush old and new systems with fresh clean water before commissioning the new boiler.

• Use magnetic dirt separators on systems containing large amounts of iron and to remove debris from system water.

• Where possible, treat boiler feed water.

• Repair system leaks immediately to prevent oxygen and untreated water from entering the system.

When installing a new boiler into a large building with existing steel and copper piping, sometimes it’s difficult to flush an entire system, Morgan recommends at the least testing the water and treating the system water before introducing new Continued on MH18 WWW.HPACMAG.COM

Trust Mitsubishi Electric For Your

Net Zero Hydronic Solutions LOW CARBON HYDRONIC HEATING & COOLING, AND DOMESTIC HOT WATER SYSTEMS u Natural Gas Alternatives for Electrification u Trusted Performance, Quality and Reliability u Reduces Energy Consumption Over Comparable Natural Gas Systems u Strong Canadian Customer Support Team

VISIT US AT CIPHEX WEST BOOTH 625

MITSUBISHIELECTRIC.CA | CLIMAVENETA.CA

Game changing innovation Introducing the smart generation of Vitodens Grow your business with Viessmann future-proof solutions. Our smart generation of high-efficiency gas condensing boilers and digital applications are designed to work for you, saving you time and energy on and off the job.

100 Series

100 Combi Series NEW 199 MBH 200 Series

+ Flexible installation with dual position display + Fast commissioning with preconfigured start-up guide + Easy remote monitoring and servicing with Vitoguide + Optimize maintenance with interchangeable spare parts and accessories + Fits any home with residential boiler sizes from 85 to 199 MBH, all with WiFi inside

smart heating solutions made easy

viessmann.ca

Wifi inside

Your all-in-one

Digital assistant Introducing Vitoguide

Our new Vitoguide app connects to any Vitodens smart generation boiler to streamline and simplify each installation. + All-in-one app for installation, service, maintenance & monitoring + Enhanced customer experience with annual automated maintenance reminders + Faster installation with guided step-by-step start-up and commissioning reporting + Simplified maintenance with replacement parts guide + Proactive monitoring with remote diagnostics & notifications

Download the Vitoguide app today

Register for new product training

CHEMISTRY

Modern Hydronics

boilers, or look at de-coupling the new boiler system from the existing system with a heat exchanger, so you can ensure you have great water quality flowing through the boilers.

He’s also seeing installations where the hydronic system is decoupled from the make-up water feed system with a make-up package to easily treat and test the water in the boiler system.

“I’ve seen closed-loop heating boilers installed in buildings where they’ve had leaks and in a very short order of time will fail because of scale build-up on the boiler,” agreed Goldie, who also pointed out the importance of the volume of water in a system even if the municipal water has been tested before entering the system.

“The problem is there might be so much volume in that building that there’s still enough mineral content in that volume of water…even though the water is within the acceptable limits,” said Goldie. “The total volume brings so much calcium into these heat exchangers that you’re still going to have a problem. I’m a big fan of isolating your boiler system from your building, so putting a heat exchanger in between your boiler and your system enables you to have much better control over the boiler water.”

Custom Built Retrofit Fan Coil Systems for Apartments & Condos Saving you and your customers time and unnecessary cost Installation of our high quality, custom-sized systems virtually eliminates all drywall, painting and finishing work while delivering, highly efficient, whisper quite comfort!

OUR PRODUCTS ARE: • Canadian made • Carry up to 5 year warranties • Available in both vertical and horizontal configurations

INNER-COOL SYSTEMS

FALL 2021

HPAC_Inner_Cool_Feb_2021.indd 1

This installation method is especially beneficial for instance when a service contractor may need to drain the riser. Without isolation the contractor is most likely to be refilling the system with untreated municipal water.

What about the use of glycol in hydronic systems? Morgan said the use of glycol can be beneficial for both its anti-freeze protection and its inhibitors which help prevent any microfilm build-up or rust in the piping system. The inhibitors also lubricate the seals and pumps which help the hydronics system overall.

Another crucial piece of equipment, in our experts’ opinions, is a magnetic filtration system. Magnetic filtration systems trap magnetite which is a build-up of metal particulates which attach to components in the heat exchangers and pumps. More and more manufacturers are recommending the installation of magnetic filters on inlets before the water goes into the heat exchanger or pump as a way of treating the magnetite problem.

“Magnetic filtration cannot be ignored anymore,” said Morgan who stressed it must be properly managed by the installer, and building owners need to be educated on the downfalls of noncompliance with the manufacturers’ recommendations.

“When someone spends $150,000 or more on a new commercial boiler system, and after one heating season it’s not covered under warranty and it’s failing … that’s a much bigger issue than what the investment would have been up front,” said Morgan.

The webinar ended after a brief question and answer session with the conclusion that optimizing boiler chemistry is not an option anymore, and it can save a lot of money if you maintain these systems according to the manufacturers’ recommendations no matter where your water comes from.

To view the full webinar visit hpacmag.com/tech-pulse. <>

HEAT TRANSFER PLATES

The next edition of 30 Mechanical Minutes will feature hydronics expert John Siegenthaler discussing the effect of heat transfer plates on the performance of “staple up” radiant floor heating systems.

Date: Thursday, September 2nd at 1PM (eastern time).

Visit hpacmag.com for registration details.

Contact us at 905-766-1513 and visit us online at inner-coolsystems.ca to check out our range of customizable options and our engineering excellence!

MH18

“Magnetic filtration cannot be ignored anymore.”

Sponsored by

MODERN HYDRONICS 2021-01-19 12:01 PM

WWW.HPACMAG.COM

24 x 32

SmartPlate Has EVolved Introducing SmartPlate EV. With its ultracompact 24" x 32" footprint, vertical piping connections and capacities up to 4500 MBH and 300 PSIG, the SmartPlate EV indirect water heater gives you greater design fl exibility for standard and highpressure systems. It also easily integrates with AERCO’s Benchmark boilers and smart Edge Controllers for a powerful combination system.

Join the EVolution. SmartPlate EV.

800.526.0288

I aerco.com ©2021 AERCO

DESIGN

WATER WORKS The design of the new headquarters for the Toronto and Region Conservation Authority will showcase its mechanical systems.

BY DOUG PICKLYK

M

MH20

FALL 2021

MODERN HYDRONICS

The new TRCA office is a mass timber building with geothermal heating and cooling and solar thermal panels.

cooling and ventilation opportunities.

For example, the building management system will alert occupants on their phone via an app to either open or close windows to ensure the building is using energy most efficiently.

The central mechanical room in the basement was originally planned as a closed-loop geothermal system, but after ground water was found on the site a redesign led to an open-loop geothermal solution. So instead of drilling some 44 boreholes, now there will be four boreholes. “The open-loop geothermal is an opportunity the client didn’t want to miss out on, because they are experts in water flow, conservation and protection their staff was able identify an underground bedrock valley in which underground aquifer sits” says Jamie Dabner, principal with Integral Group, the mechanical engineers on the project.

The original plan called for a solar thermal system on the roof as a back-up to the ground source heat pump strategy, but now with the geothermal system being configured with an open loop the geothermal system will connect to the mechanical plant in the basement and the solar thermal array on the roof will boost the efficiency of the system WWW.HPACMAG.COM

CREDIT: RENDERING COURTESY ZAS ARCHITECTS

anaging and protecting natural water systems in and around the city of Toronto is the mandate of the Toronto and Region Conservation Authority (TRCA), so it’s no surprise the design of the organization’s new headquarters incorporates water in many ways including, of course, its mechanical systems.

Being built near the Black Creek ravine in Toronto’s north end, the $65 million project (with support through NRCan’s GCWood Program) broke ground in January of 2020 with occupancy slated for September 2022. The new light-filled open-plan four-storey office building covers some 90,000 sq. ft. (8,100 m2) and will be a unique mass timber structure.

ZAS Architects of Toronto in a joint venture with Irish-based Bucholz McEvoy Architects designed the TRCA headquarters to be one of the most energy efficient mid-rise commercial buildings in North America “We envisioned TRCA’s new workplace as one that will inspire, motivate and support the culture of its employees, who are champions of the local environment,” says Peter Duckworth Pilkington, principal with ZAS Architects. In addition to the use of wood, other sustainable design features include an energy efficient building envelope, a green roof, rainwater harvesting, low impact landscape development, and solar chimneys which increase efficiency by heating ventilation air.

The heating and cooling system is

electric, using geothermal heat pumps along with roof mounted solar panels for thermal assistance. The project is participating in the Canadian Green Building Council’s (CaGBC) Zero Carbon Building Pilot Program, and it’s targeting Net Carbon Zero, LEED Platinum v4, Toronto Green Standard Level 2, and WELL Building Silver certifications.

“Overall, this building is tracking to be among the most energy efficient buildings in the country, somewhere around 54 ekWh/m² [equivalent kilowatt hours per meter-squared],” notes Duckworth Pilkington. When compared to traditional office buildings of this size, carbon emissions along with operating costs are projected to be reduced by up to 50%.

A main feature will be four water walls in the main atrium—each water wall is actually a glass enclosure (like a duct) in which the ventilation air is pulled down from the outdoor intake at the roof level and distributed to energy recovery ventilators (ERVs). Inside each of the glass ducts a chain-link mesh is suspended the full height and water cascades down the four-storeys—providing a visual display and playing a role in pre-heating and humidification of the dedicated outdoor air HVAC system. “Through the water wall feature, we’re making the building’s life support systems that are usually hidden infrastructure visible and tangible,” says Duckworth Pilkington. “Making the invisible visible when it comes to energy use, serves as a very real reminder of the impact our daily lives and decisions have on the planet every day.”

The windows on the southern façade feature operable exterior shading, and a secondary skin in front of the shading allows for pre-heating of the air before entering the building in cooler months.

A lot of the building’s control strategy is designed to optimize passive heating,

Modern Hydronics

and provide greater heating potential for the building. “We actually have it piped up to be available for free heating, so there are times in the shoulder seasons when we might not want to run the compressors, and we’re just going to

WWW.HPACMAG.COM

HPAC_MORGANGROUP_HALF_JULY_BAS.indd 1

run the building on solar thermal only,” explains Dabner.

Because the preference was to expose the wood on the interior and not hide it with drop ceilings, there is an air distribution plenum system, about 14-in. deep, across the top of each cross laminated timber (CLT) floor slab on every storey with supply air diffusers.

The plenum is used for ventilation only, and separate from that is the fourpipe radiant system with six-way valves feeding water-based ceiling panels used for both heating and cooling.

The piping network runs in the plenum, and the pipes poke down to the modular radiant ceiling panels which are hung on the underside of the CLT flooring.

“It’s quite a special strategy that required coordination with all of the design team,” says Dabner. The energy calculations led to about 40% of radiant

MODERN HYDRONICS

coverage in the interior zones of the building and the remaining 60% around the exterior zones of the building.

To accommodate cooling with the ceiling panels, considering Toronto’s summertime humidity, there will be dew point sensors in the thermostats in each of the zones, and if somebody opens a window raising the humidity indoors, the zone will turn off.

There are also ceiling fans, and according to Dabner the fans can increase the capacity of the radiant panels by up to about 10% in cooling mode.

He points out that a well thought-out four-pipe system is really the future of Net Zero carbon design.

Once completed, the new TRCA headquarters will be used as a learning centre–a living laboratory for developers, researchers and students–to demonstrate zero carbon features. <>

FALL 2021

MH21

2021-07-29 10:23 AM

IN-FLOOR

Modern Hydronics

IN-FLOOR PROVIDES RELIABLE STORAGE

B

elmont Farm Supply, located about 185 km outside of Toronto in Belmont, Ont, provides fertilizer, seed and more to farmers in the southwest region of the province. It has been part of the farming community since the 1940s.

When owner-partners Graham Hutton, Brad Walker and Jeff Aarts decided to build a new fertilizer warehouse, they wanted a state-of-the-art building to maintain the floor at a constant temperature. “We were trying to keep the moisture from forming on the concrete when the humidity rises,” Walker notes.

A floor temperature between 57F and 60F is essential when storing fertilizer. A lower floor temperature that allows outside temperatures to rise above it causes risk of condensation that can turn the fertilizer from a solid to a liquid.

Walker selected St. Marys, Ont.based iFH Design and Installations, headed up by Paul McRoberts, to design and install the radiant floor heating.

McRoberts is a 47-year veteran in hydronic heating; after beginning as an apprentice in 1972, he opened his own business in 1984 and was one of the first contractors in southwest Ontario to specialize in radiant floor heat.

DON’T FORGET THE INSULATION The ceiling height of the steel-constructed building is more than 36 ft. The MH22

FALL 2021

A 20,000 ft² fertilizer warehouse equipped with radiant floor heating.

concrete slab is 372 x 96 ft. More than four miles of PEX was installed. The radiant system uses piping in ¾-, 1-, 1-¼-, 1-½- and 2-in. sizes; 1 ¼-in. stainlesssteel manifolds; ¾-in. connectors; and compression-sleeve fittings.

“Instead of doing all the large diameter supply and return piping above, we did it all below ground with 2-in. and 1-½-in. oxygen-barrier piping with the fittings,” McRoberts explains. “Then we insulated all the piping with 1-in. foam insulation made for underground use.”

The next step was the placement of 2-in. expanded polystyrene panels that double as insulation and a piping-installation method. The ¾-in. by 500-ft loops were walked into place on top of the boards at 9-in to 12-in spacing then connected to the manifolds. A 40% glycol solution runs through the PEX network.

From the boiler room, all manifolds were supplied with 1-½-in. oxygen barrier supply lines. The longest supply lines were nearly 300 ft from the heat source.

“In each area of the manifolds, we installed floor sensor wells with PEX piping so we could insert our sensors in MODERN HYDRONICS

after the concrete was installed,” he says. “Before the concrete pour, the floor piping was pressurized to 100 psi to ensure there were no leaks under the floor, which also included the 1-½-in. and 2-in. in-slab distribution piping.”

In the mechanical room, two boilers are the heat source for the radiant heating system — providing nearly 800,000 Btu/h of energy to maintain the required floor temperature. Low-loss headers and a hydronic dirt separator provide hydraulic separation and protect the components.

A high capacity circulator distributes water to the five manifold stations. Isolation flange kits and floor sensing and pump controls round out the equipment.

QUALITY AND RELIABILITY Opened in April 2019, the owners have been through winter seasons with the warehouse full and have fine-tuned the floor temperatures. “We are extremely happy that we have the heated floor,” Walker says. “It certainly helps maintain the quality of our products.” <> This article provided courtesy of REHAU. WWW.HPACMAG.COM

PHOTO COURTESY OF IFH DESIGN AND INSTALLATION

Radiant heating used for temperature and condensation control in agricultural fertilizer warehouse.

Discover fresh ideas, expand your network, and fine-tune your skills at Western Canada’s biggest show for plumbing, hydronics and HVACR.

More than 30,000 sq ft of exhibits Thousands of products from North America’s top manufacturers Information packed seminars Fantastic prizes Free Parking for attendees

REGISTRATION OPENING SOON

EXPERIENCE THE FUTURE OF PLUMBING, HYDRONICS AND HVACR IN PERSON AT

CIPHEX WEST 2021 NEW DATE! November 3 & 4, 2021

New products. New ideas. New tools. New tech.

CIPHEX

WEST

Presented by the Canadian Institute of Plumbing & Heating

NEW LOCATION Pacific Coliseum at the PNE Vancouver, British Columbia

ciphexwest.ca

HEAT PUMPS

CUT IT OUT WITH THE CUT-OUT QUESTIONS Old ways of thinking are not compatible with a low carbon future.

BY CHRIS DESROCHES, P.ENG.

T

he term “heat pump” has many misnomers and gets thrown around far too loosely these days as HVAC conversations shift towards sustainability, low carbon emissions and building electrification.

A niche subset of heat pumps that are gaining momentum in the Canadian hydronics market are air-to-water heat pumps, which, aside from electric boilers, are an alternative to traditional fossil-fuel based boilers. Heat pumps sound attractive, so when it comes to hydronic systems, why are they still lurking in the shadows?

Air-to-water heat pumps extract heat from the air outside a building, so the machine’s ability to perform efficiently and provide useful heating is greatly influenced by outside air temperature. Any heat pump will have practical limitations due to the refrigerant being used, and it will eventually shut off when it can no longer effectively provide useful heat to the building. This is commonly referred to as the “low ambient cut-out temperature.”

And when it comes to designing with air-to-water heat pumps, the most critical design consideration the Canadian market is fixated on, and the first question to come up in heat pump conversations with a contractor or engineer is: “So… What about the cut-out temperature?”

While there have been great strides in improving heat pump performance and pushing the limits to operate in colder temperatures, usually, the design temMH24

FALL 2021

perature is below the heat pump cut out. In these cases, an auxiliary heat source will be required when using airto-water heat pumps. However it is important to recognize the frequency of time where it is colder than the cut-out temperature for the majority of Canada’s built environment is relatively few hours, typically a few weeks of the heating season. In favourable climates, such as coastal cities or even Toronto, it can be less than a week of the entire year.

When it comes to heat pumps, it’s about using the heat pump when it makes sense to do so.

“The days of seeking one size fits all solutions are finished.”

Gas-fired boilers have been the norm in Canadian hydronic systems for decades due to widely available low-cost natural gas, not to mention they are relatively inexpensive. Boilers do not have the same design challenges nor constraints that air-to-water heat pumps have, so it was easy for an engineer to explain to a client why they wouldn’t entertain an alternative to a boiler.

Today, design criteria are undergoing substantial change as the market shifts towards prioritizing energy efficiency and sustainability. Building and Energy Codes, as well as the metrics used to define what constitutes a “cutting-edge” and sustainable design are becoming more stringent. Limits on Energy Use MODERN HYDRONICS

Intensity (EUI), Thermal Energy Demand Intensity (TEDI), Greenhouse Gas Intensity (GHGI), among other metrics, are being scrutinized, and the bar is consistently being raised. While these metrics may be optional and modest today, they will become prerequisites as time moves forward to achieve net-zero in new buildings by 2030.

The Federal carbon tax will also transform the industry towards electric heating solutions, which brings us back to air-to-water heat pumps. By focussing on improving building designs with both active and passive energy reduction, we can improve our buildings’ carbon footprint, but will that be enough?

Air-to-water heat pumps are one part of a wider solution, and they will become more common on the path to 2030 in hydronic systems.

Do heat pumps have limitations? Yes, but there are workarounds. The days of one size fits all solutions are finished, as it is often not compatible with a low-carbon future. This should be viewed as a benefit by providing buildings with resiliency and redundancy.

It’s not so much a matter of if air-towater heat pumps will become the norm for hydronic systems, but rather when the market will recognize and understand how the technology fits into a low carbon building. So instead of asking “What is the cut-out temperature?” the real question is “What is the best way to make use of the heat pump while it can operate?” <>

By Chris DesRoches, P. Eng., Applied Product Manager, Mitsubishi Electric Sales Canada, Inc. WWW.HPACMAG.COM

August 2021

I SEE YOU’RE INTO HYDRONICS… IS CANADA’S #1 SOURCE FOR HYDRONIC COVERAGE: products, applications, events, news and more.

MODERN HYDRONICS 2021

MODERN HYDRONICS 2021

FALL

SPRING

MODERN HYDRONICS 2020 FALL

B.C. HIGH SCHOOL EMBRACES LOW-TEMP SYSTEM GEOTHERMAL CONTROL ISSUES

WAREHOUSE IN-FLOOR INSTALLATION SIZING PANEL RADS FOR LOW WATER TEMPS

SWEET HEAT 2021 This year’s contest-winning projects

FLOW ENERGY ...

DON'T WASTE IT Optimizing design for greater efficiency

PLANNING MULTI-ZONE LAYOUTS BOILER CHEMISTRY CONSIDERATIONS

COVID-19 AND HYDRONICS FLAME-FREE PIPING SOLUTIONS MODERN HYDRONICS SUMMIT PREVIEW

a publication of

10 EXPANSION TANK POINTERS OPTIMIZING EFFICIENCY WITH ECM CIRCULATORS

FOSSIL FUELS UNDER PRESSURE Navigating a ‘low carbon’ economy

DON’T MISS A Y COP SINGLE AC. OF HP

RENEWABLE HEAT SOURCE CONTROLS CONSTRUCTION CHANGES AFFECT DESIGN

a publication of

a publication of

FREE to qualified subscribers!

Please fill in the following and fax today to 416-442-2230 or visit our website and click on subscribe www.hpacmag.com

YES! I wish to receive/continue to receive HPAC Magazine absolutely FREE!

No

Name

1. Company Business Activity? (Check ONE only)

Title

 Mechanical Contractor  Fuel Oil Dealer/ Contractor  Consulting Engineers/Specifying Writer

 Refrigeration Service Engineer/Contractor  Wholesaler/Distributor/Agent  Plumbing Inspector

 Government  Utilities

 Hospitals and Related Institutions  General Building Construction

Company Address

 Others Allied to the Field (please specify) ————————————————————————————————

City

Province

Business Phone # ( Business Fax # (

Postal Code

2. Do you specify, purchase and/or approve the purchase of mechanical products or services?  Yes  No

)

3. Company Job Sector? (Check ALL that apply)  Commercial  Residential  Industrial  Institutional

)

Your FREE subscription also includes our FREE e-newsletter, please provide your e-mail address below: E-mail: Signature

Date (Must be signed and dated to be valid)

HPAC Magazine

111 Gordon Baker Rd. Suite 400, North York, ON M2H 3R1

Publisher reserves the right to determine qualification & limit distribution.

/ D

/ M

Y

4. Number of employees at this location? 1-4  20 - 49 5-9  50 - 99

 200 - 499  500 - 999

 10 - 19

 1000 - 2499

 100 - 199

5. Company Job Activities? (Check ALL that apply)  Plumbing (i.e DHW, Piping etc.)  Ventilation  Refrigeration  Electric Heating

 Forced Air Heating  Air Conditioning

 2500 +  Unknown

 Hydronic Heating  Fire Protection  Other—————————— (please specify)

FAX: 416-442-2230

PRODUCT SHOWCASE

Belimo has introduced its integrated Energy Valve and Thermal Energy Meter that together

Jaga Climate Systems has announced its new Dynamic Boost Hybrid (DBH) technology. Suit-

Webstone has announced their new Magnetic

provide energy measurement and control, Del-

ed for use with low-water temperature systems

Boiler Filter (MBF) XL model. MBF XL is de-

ta T management, and IoT-enabled billing. The

such as heat pumps, solar energy and con-

signed for larger residential boilers and is com-

solution offers direct integration to building

densing boilers, the new DBH unit connects to

monly installed on the system run. The magnet

management systems or IoT-based monitoring

a hydronic fin tube element, forcing convection

captures ferrous particles from the system be-

platforms. The valve and thermal energy meter

and increasing the efficiency of the emitter to

fore reaching the boiler, with an integral drain

can be powered using Power over Ethernet

provide quick heat. The unit gives users more

valve and service tool to remove the accumu-

(POE) allowing both power and network con-

control over individual room temperatures and

lated debris. The units are available with a

nectivity. They also connect with the Belimo As-

reduces the need for unnecessary heating and

choice of Press, FIP, MIP, or SWT union connec-

sistant apps and web server tool to support the

overheating.

tions to join to system piping.

design process, simplify commissioning, and

jaga-canada.com

www.webstonevalves.com

assist with troubleshooting. belimo.com

Viessmann has added WiFi connectivity to its latest generation of residential Vi-

Lochinvar has announced its new Crest con-

todens condensing boilers. The Vitodens

densing boilers with Hellcat combustion tech-

100, available in both combi (B1KE) and

nology for commercial applications. The com-

heat-only (B1HE) models, and Vitodens

mercial boilers come in eight models ranging

200 (B2HE) include stainless steel heat

from 1 million to 6 million Btu/h, with up to a

exchangers, the company’s Lambda Pro

25:1 turndown, a wave fire tube design, and

Plus clean combustion control, 10:1 turn-

CON-X-US Remote Connect capabilities. The

down ratio, and work with either propane

Hellcat technology features an O2 sensor lo-

or natural gas. Both are available in a

cated in the combustion chamber that along

range of sizes and MBH outputs. The new

with its Smart Touch controls helps adapt and

Vitoguide app allows contractors to com-

account for seasonal changes, shifts in weath-

mission the boilers from a mobile device.

er patterns and altitude. lochinvar.com

viessmann.ca

MH26

FALL 2021

Tekmar’s BACnet Snow/Ice Sensor Inter-

Navien’s NCB-H condensing combi-boiler se-

face 681 measures the presence of snow

ries includes five models ranging from

or ice through sensor technology and in-

160,000 Btu/h for DHW and 60,000 Btu/h for

terfaces with building automation sys-

heating, to 210,000 Btu/h DHW and 150,000

tems via BACnet MS/TP to automate the

Btu/h heating. The NCB-H uses dual stainless

start and stop and slab temperature op-

steel heat exchangers for heating and a sepa-

eration of hydronic or electric snow melt-

rate flat plate stainless steel heat exchanger

ing equipment. The interface supports

for DHW. Other features include: 15:1 turn

Snow/Ice Sensor 090 (automatic start

down ratio for DHW and up to 11:1 for heating,

and stop) and Snow Sensor 095. Fea-

built-in DHW recirculation controls, 2-in. vent-

tures include warm weather shut down

ing up to 65-ft. and 3-in. venting up to 150-ft.

and cold weather cut off. watts.com

navieninc.com MODERN HYDRONICS

WWW.HPACMAG.COM

Modern Hydronics

Bell & Gossett is expanding its CRS CoalescingStyle Air & Sediment Separator product line. The

Taco Comfort Solutions has expanded its offer-

The Bosch Singular Boiler series includes the

units help break entrained air and suspended

ing of stainless steel within its ECM circulator

5200 and 4000 combi boiler solutions, offer-

solids out of system fluid improving heat trans-

family. 00e Series circulators are built with ef-

ing 5.2 and 4 gallons of hot water per minute

fer and energy efficiency. CRS design helps pro-

ficient and quiet EC motors to consume up to

respectively.

tect pumps, boilers and other components, im-

85% less electricity, and also offer automatic

140,000 Btu/h for space heating, while the

proving and prolonging the life of a system.

unblocking and air-purge mode. Their dual

4000 unit offers 80,000 Btu/h. Featuring a

Models are available for air-only, sediment-only,

electronic knockouts and six-inch stranded

95% AFUE rating and a turndown ratio of up to

and air/sediment combo separation, and in

wire leads make for easy wiring. They also in-

10:1, the units include dual stainless-steel

sizes 2-in. through 36-in. with 2-in. – 4-in. flange

clude the integral flow check and are double-

heat exchangers and also feature an internal

or groove end connections.

insulated, so no ground wire is required.

circulator and the capability for outdoor reset.

bellgossett.com/sales-service

TacoComfort.com

www.boschheatingandcooling.com

The

Singular

5200

offers

Become a

Pro Dealer Reminders Referrals & Rewards Baxi Pro Dealers can start earning rewards today! Ask us how!

www.baxiboilers.com

Contact us for more information: (519) 627-0791 customerservice@mordennational.com

WWW.HPACMAG.COM

HPAC_ECR_March21.indd 1

MODERN HYDRONICS

FALL 2021 MH27 2021-02-11 11:57 AM

EMITTERS

ADJUSTING FOR CONDITIONS

How to size panel radiators for low water temperatures.

M

MH28

FALL 2021

SHOW ME THE NUMBERS As is the case with many heat emitters in North America, the published data for heat output from panel radiators is based on relatively high water temperatures. The most common being an average water temperature of 180F, and an assumed room air temperature of 68F. This makes the difference between the average water temperature in the radiator and the room air temperature 18068=112F. This temperature difference, or Delta T (∆T), is a reference condition which will eventually be used as part of the derating procedure for operation at lower water temperatures.

In North America it’s common to find heat output rating tables based on this 112F temperature difference. One example is shown in Figure 2 (pg. MH30).

MODERN HYDRONICS

The black numbers in Fig. 2 are heat outputs (in Btu/h) based on the dimensions (height, width, and thickness) of the radiator. The typical “thickness” dimension is based on 1, 2 or 3 water plates within the panel. Note the reference conditions in the upper right.

ADJUSTING DOWNWARD These rating tables are fine for installation where a conventional boiler operating at relatively high water temperatures serves as the heat source. But what happens when panel radiators are installed in lower water temperature systems supplied by heat pumps or other low temperature heat sources? The short answer is that their heat output decreases. But by how much?

To date, there is no North American WWW.HPACMAG.COM

CREDIT: PHOTO: MILEA/ISTOCK/GETTY

odern panel radiators are one of my favorite heat emitters. They’re easy to install, emit radiant as well as convective heat, and have high quality powder coat finishes. They’re nice in new construction and very well suited to retrofitting.

The panel in Figure 1 is about two feet high and four feet wide. You can see the two ½-in. PEX-AL-PEX tubes that supply it connected at the middle of the base of the radiator. You can also see the nonelectric thermostatic valve that regulates the flow rate and thus the heat output of the panel, making it an independent zone. There’s also a dual ball valve fixture at the base of the radiator that can isolate the panel from the system if ever necessary.

BY JOHN SIEGENTHALER

⎢⎝ ⎣

2

⎠

⎥ ⎦ Formula 3:

rating standard that’s specific to panel radiators. This is where we turn to a European standard called EN442. It is widely accepted across Europe where tens of millions of panel radiators are used, and it provides the basis for adjusting heat outputs over a wide range of conditions. It also involves several calculations.

Formula The 1: first of which is Formula 1: Formula 1:

⎛∆T ⎞ Qe = Q112 ⎜ d ⎟ ⎝ 112 ⎠

1.3

Where: Qe = estimated1: heat output of the panel Formula radiator (Btu/h) ∆Td = temperature difference deterFormula 2: Formula1.32 or Formula mined using either 3 below (F) ⎛ ∆ Td ⎞ Qe == Q ⎜⎝ of the⎟⎠ panel radiator Q112 the112 output 112between the averwhen the difference ⎡⎛ Tin + T ⎤ out ⎞ ∆ Twater − T ⎜ ⎟ d = temperature air age and room air tem⎢⎝ ⎥ ⎠ 2 ⎦ perature is ⎣112F (Btu/h) 1.3 = an exponent (not a multiplier) (use [yx] key on scientific calculator or your smart phone) 2: Formula

Formula 3:

Formula 2:

⎡⎛ T + T ⎞ ⎤ = ⎢(⎜Tin in− Toutout) ⎟ − Tair ⎥ ∆∆TT d d= ⎣⎛⎝ Tin −2Tair ⎞⎠ ⎦ ln ⎜ ⎝ Tout − Tair ⎟⎠ Formula 3:

∆T

∆ Td = d ⎛ T −T ⎞ ln ⎜ in air ⎟ ⎝ Tout − Tair ⎠

Formula 3:

Formula 3:

(Tin − Tout )

∆ Td =

⎛ T −T ⎞ ln ⎜ in air ⎟ ⎝ Tout − Tair ⎠

⎡⎛ T + T ⎞ ⎤ ⎡⎛ 160 + 140 ⎞ ⎤ ∆ Td = ⎢⎜ in out ⎟ − Tair ⎥ = ⎢⎜ ⎟⎠ − 65 ⎥ = 85º F ⎠ 2 2 ⎣⎝ ⎦ ⎣⎝ ⎦

Formula 4:

The value of Qn for Formula 1 is the radiator’s listed heat output at ∆T= 112, 1.3 1.3 which was Btu/h.

T ⎞ Btu ⎛ 85 ⎞ ⎛ ∆ 9500 Qe = Q112 ⎜ Td ⎟ =− 9500 = 6637 ⎜ ⎟ T ⎝air ⎠ ⎝ 112out ⎠ 112 Now u = just put the numbershr into Formula 1 and T grab − T your (scientific) cal-

( (

in

) air )

Formula 4:

u=

(Tout − Tair ) (Tin − Tair )

air

1.3

1.3

of a modern 85 Btu⎤panel radiator. ⎛⎡⎛Figure ⎞1. Example Tin⎛+∆TToutd ⎞⎞ = 9500 160 + 140 ⎡Q ⎤ ⎞ ⎛ Q = = 6637 ∆ Td e= ⎢⎜ 112 ⎜⎝ 112 ⎟⎠⎟ − Tair ⎥ = ⎜⎝⎢112 ⎜⎝ ⎟⎠ ⎟⎠ − 65 hr ⎥ = 85º F ⎝ ⎠ 2 2 ⎣ ⎦ ⎣ ⎦ WWW.HPACMAG.COM

⎛ Tin − Tair ⎞ ln culator. You can ⎜⎝ Tuse a−scientific ⎟⎠ calculaout to T air1.3 tor to raise a number the power.

Don’t have one? Just turn on your + T ⎞ the ⎤calculator ⎡⎛ T press ⎡⎛ 160 + 140APP, ⎤ iPhone, and ⎞ ∆ Td = ⎢⎜ in out ⎟ − Tair ⎥ = ⎢⎜ ⎟⎠ − 65 ⎥ = 85º F ⎠ to the 2 2 ⎣⎝ phone ⎦ “landscape” ⎣⎝ ⎦ turn the orientation - instant scientific calculator.

Here’s the result.

Where: ⎡⎛ T + Tout 1.3⎞ ⎤ ⎡⎛ 16 Btu = ⎜ ∆Qe T= Qd112=⎛⎜ ∆⎢T⎜d ⎞⎟ 1.3 =in9500 ⎛⎜ 85 ⎞ ⎟ − Tair ∆Td = effective temperature difference (F) = 6637 ⎥ ⎢⎝ ⎝ 112⎝⎠ hr ⎦ 2 ⎝ 112 ⎟⎠ ⎠ ⎣ ⎣ Tin = inlet water temperature to panel (F) Tout = outlet water temperature from As the entering water temperature Formula panel (F)1: drops closer to the room air temperaFormula 4: Tair = room air or the+flow Tin + Tout(F)⎞ 140rate ⎡1.3⎛temperature ⎤ ture, ⎡⎛ 160 ⎞ through⎤ the panel ∆==TQnatural = = 65 ⎥ = 85º − T ∆ T ⎛ ⎞ d ⎜ ⎟⎠ − standard ⎜ ⎟ lnQ logarithm function (use [ln] changes the EN442 intro-F d air ⎥ ⎢⎟⎠ ⎝ ⎢ (T − Tair2) e 112 ⎜ ⎠ ⎝ 112 ⎣ 2 u⎣=⎝ out ⎦ ⎦ key on scientific calculator or your smart duces way to calculate the (Tin −aTmodified air ) phone) difference between the average water Here’s an example: In Figure 2, a temperature in the panel and1.3 Formula 2: Td ⎞ the room ⎛ 85 ⎛ ∆the 2-water plate radiator that’s 24 inches air temperature value = ∆Td Qe = Q112(e.g., ⎜⎝ ⎜⎝ ⎟⎠ of 9500 Tout ⎞inches ⎡⎛ Tin +48 ⎤ 11 112 high and long has a rated used in Formula 1).

This is where ∆ Td = ⎢⎜ − Tair ⎥ ⎟ ⎠ 2 ⎣⎝ ⎦ heat output (at ∆T= 112 ºF) of 9,500 Formula 3 comes in.

Btu/h. Estimate its heat output assumThe decision on using Formula 3 Formula 3: 1.3 1.3 ing an inlet water temperature of 160F, rather Btu on yet ⎛ 85than ⎞ Formula 2 is based ⎛ ∆ Td ⎞ Q(Tine −=Twater Q112temperature 9500another 6637but it’s necesan outlet formula out ) ⎜⎝ ⎟⎠ = (sorry, ⎜⎝ ⎟⎠ of =140F, ∆ Td = ⎛ Tin − Tair ⎞ temperature 112 112 air and alnroom of 65F. sary).

We’ll call it Formula 4.hr Formula 4: ⎜⎝ T − T ⎟⎠ out air For now we will use Formula 2 to calculate the value of ∆Td: Formula 4:

(T − T ) ∆∆TTd == ⎡⎛ Tinin + Toutout⎞ − T ⎤ = ⎡⎛ 160 + 140 ⎞ − 65 ⎤ = 85º F ⎟⎠ ⎟⎠ ⎞ air ⎥ ⎢⎜⎝ d ⎢⎜⎝ ⎛ Tin2− Tair ⎥ 2 ⎣ ⎦ ⎣ ⎦ ln ⎜⎝ T − T ⎟⎠ out

Tout ) Hydronics (Tin −Modern

(T= in − Tout )

MODERN HYDRONICS

u=

(Tout − Tair ) (Tin − Tair )

Where: Tout = outlet fluid temperature from panel (F) Tin = inlet fluid temperature to panel (F) Tair = room air temperature (F) This formula looks at how the outlet temperature of the radiator is dropping relative to the inlet temperature. As the flow rate through the panel decreases there would be a wider temperature drop across the panel and thus the value of “u” in Formula 4 will drop.

Here’s the criteria set by the EN442 standard: If u < 0.7 use Formula 3 If u ≥ 0.7 use Formula 2 Here’s another example. Water enters the panel radiator used in the previous example at 115F, and exits at 92F. The Continued on MH30 FALL 2021

MH29

EMITTERS

Modern Hydronics

Since the EN442 standard (T − T ) 0.54 ( 92 − 65< ) =0.7 = 0.54 (T − T ) (115 − 65 ) prescribes use of Formula 3 to calculate ∆Td: u=

out

air

in

air

(Tin( − Tout) )

Heat output ratings (Btu/hr) at reference conditions: Average water temperature in panel = 180ºF Room temperature = 68ºF temperature drop across panel = 20ºF

1 water plate panel thickness

24" high

height

1 water plate

(T − Tair ) = ( 92 − 65 ) = 0.54 u = out (Tin − Tair ) (115 − 65 )

length

16" long

24" long

36" long

48" long

64" long

72" long

1607

2421

3632

4842

6455

7260

1870

20" high

2817

4222

5630

(T −TTair )−=Tair ( 92) − 65()92= −0.54 65 ) u = u =out ( out =− 65 ) = 0.54 (Tin −(TTair )− T(115 115 − 65 ) ( in air ) (T − T ) ( 92 − 65 ) = 0.54 u = (Tout − Tair )= ( 92 − 65 ) air in − Tair ) u = (Tout =(115 − 65 ) = 0.54 16" high

1352

2032

3046

4060

2 water plate panel thickness

24" high

2 water plates

air temperature in the room is 65F. Determine the correct ∆Td to use in Formula 1.

Solution: Start by calculating the value of u:

16" long

24" long

3153

4750

2733

16" high

10" high

(115 − 92 )

4123

2301

3455

1491

48" long

6186

8245

7127

(Tin − Tair ) (115 − 65 ) 20" high

36" long

9500

5180

2247

6907

3373

4498

7509 5415

64" long 12668 10994 9212 5995

8447 6091

72" long 14254 12368

10363 6745

23 23 = ∆T = = = T −T = 37.33º F ( 23 (115 − 92 ) = 23 = 50 ⎞ ln(1.85185) in out ) ⎛ 115 − 65 ⎞ ⎛ T −T ⎞ ⎛ = 3 water plate panel thickness ∆ T = = 37.33º F ln ⎜ ln ⎜ ⎟⎠ ln ⎜⎝ d ⎟⎠ ⎟ ⎝ 115 − 65 50 92 − 65 27 ln(1.85185) ⎛ Tin − Tair ⎞16" long ⎛ 24" long ⎞ 36" long ⎛ ⎞ 48" long ⎝ Tout − Tair ⎠ 64" long 72" long ln Tair ) need You’ll 115 − ⎜⎝92 (T −again ln ⎜ 24" highTin −⎟ T 23 ( 92 − 65scientific ) = 0.54 calculator ⎟⎠ ln ⎟⎠ 13664 23 18216 out ⎜115 6830 u = out = 4531 ⎝ 10247 20494 T − T − 92 ( ) 23 23 ( ) 92 65 27 T − T in out ⎝ ⎠ = ∆ T = = = = 37 T − T 115 − 65 out air ( ) ( ) d ∆ T 37.33 Btu ⎛ ⎞ ⎛ ⎞ in air = ∆ Td = = 9586 =11870 5015829= 37.33º F (or iPhone turned horizontally) to 20" high 3934 5937 17807 Q = Qyour ⎜⎝ ⎟ = 9500 ⎜⎝ ⎟ = 2277 115 − 65 ln(1.85185) ⎛ ⎞ ⎛ ⎞ ⎛ ⎞ − T T 112 ⎠ hr 112 ⎠ 115 − 65 50 ln(1.85185) ⎛ 4978 ⎞ 7469⎛ ⎞ 9957 ⎛ Tinhigh − Tairin ⎞3320air 14938 ln−⎜ 92 get the natural logarithm [ln] of 1.85185 ln ⎜⎟ 115 ln ⎜ ⎟⎟ 23 ln ⎜ 13277 ln ⎟⎠ 23 9913 ln ⎜ 16" ⎟⎠ 4958 T − T ⎜ ⎟ ⎝ ⎝ ⎠ ⎝ ⎠ ⎝ 2191 3304 6609 8811 10" high in out 92 − 65 27 92 − 65 27 Tout air ⎠− T= = = = 37.33º F in (Tthe above calculation. No big deal, ∆ Td = ⎝ Tout ⎝−T air ⎠ − T ) ( 90 − 70 ) 1.3 u= = = 0.441.3 115 − 65 50 ln(1.85185) ⎛ ⎞ ⎛ ⎞ ⎛ ⎞ − T T T − T ) (115 −∆ 70 )T ⎞ ( 37.33 Btu ⎛ ⎞ ⎛ d just on the calculator= 2277 ln ⎜ rating Figure tables for panel radiator Qe enter = Q112 ⎜1.85185 ln ⎜ in air ⎟ ln ⎜⎝ 2.1.3Sample⎟⎠heat output ⎟ ⎟⎠ = 9500 ⎜⎝ ⎝ 27 ⎟⎠ 92 − 65 T112 (90Tin) −⎝press 23 hr ) 11223⎠ display the(115 [ln−x]92key. ⎝ Tout −1.3Tair ⎠ out ) (115 −and (Tin − Tout )

115 − 92 23 23 ∆ Td = = = = = 37.33º F ⎛d T − T ⎞ ⎛ 115 − 65 ⎞ ⎛ 50 ⎞ ln(1.85185) ln ⎜ in air ⎟ ln ⎝⎜ ⎟ ln ⎜⎝ ⎠⎟ ⎠ 92 − 65 27 ⎝ Tout − Tair ⎠ in air

out

air

in

air

1.3

∆∆ TdT=d = = 30.83º F − 70 ⎛ 115 ⎛ T⎞ − Tair ⎞ ln ⎜ ⎝ 90 ln− 70 in⎟⎠

(

3 water plates

d

112

e

1.3

)

(

)

⎛ ∆FTd = 37.33º

(

)

(

)

⎛ 37.33 ⎞

⎞

Btu

Qe = Q112 radiators ⎛ 115 − 65value ⎞ ⎛ 50 ⎞ ln(1.85185) ⎜⎝ ⎟ = 9500 ⎜⎝ table⎟⎠ in = 2277 Now that the appropriate possible Nowhrit’s just a matter of looking ln ⎜ ln ⎜of ∆T 112 112 ⎠ from the ⎝ 92 − 65 ⎟⎠ ⎝ 27 ⎟⎠ d ⎝⎜ Tout − Tair ⎠⎟ 1.3 has been determined, the final step is to Figure 2. ∆ T 1.3 through the table in Figure 2 to find a raBtu ⎛ 37.33 ⎞ ⎛ d⎞ ⎛ 30.83 ⎞ 1.3 1.3 Q = Q = 9500 = 2277 2500 = Qthe plug numbers into Formula 1: Solution: Start with Formula 4: diator with output close to this ⎜ ⎟ ⎜ ⎟ ⎜ ⎟ e 112 (⎝T112 ⎠− Tair ) = ( 90 − 70 ) = 0.44 ⎝ 112⎛⎠∆ Td ⎞ ⎝ 112 ⎠ ⎛ 37.33 ⎞ hr a listed Btu u = out value.⎟ A radiator with three water plates, Qe = Q112 ⎜ = 2277 (Tin − Tair1.3 ) (115 − 701.3) ⎟⎠ = 9500 ⎜⎝ 1.3 ⎠ of 24 in., and ⎝ 112 1.3 112 Btu ⎛ ∆ Td ⎞ ⎛ 37.33 ⎞ T − T 90 − 70 ( ) ( ) a height out air Q =Q = 9500 ⎜ ∆ T=d ⎞ 37.33 ⎞ Btu hr length of 48 in.

Btu ( 2500 ⎟⎠ = 2277 ⎛ ⎛ 112 ⎜) = 13,⎟ u = = 0.44 Q e= 374 ⎝ ⎠ ⎝ 112 hr 112 hr Qe =(TQin112− T⎜ air ) ⎟(115=−9500 ⎛ 30.83 ⎞ output of 13,664 Btu/h, which is ⎟ has=an2277 70 ) ⎜⎝ ⎝⎜ 112 ⎠⎟ ⎝ 112 ⎠ 112 ⎠ hr 115 − 90 ( ) very close to calculated output at This quarter of Tout − Tair ) ( 90 − 70 ) ( ∆ Td =is roughly about= one 30.83º F u= = = 0.44 − 70 ⎞ ⎛ 115 output the “rated” Since <T 0.7 use Formula Tair⎜heat 115 − 70 ) 3 to get ∆Td=112F. (T − ln ) 90 − 70 of the panel. I’ve ( (TinU(−115 air ) u = out ⎝ =90( − 70 ⎟⎠) = 0.44 − 90 ) − Tair )to be 70 ) “ballpark” ratio A radiator with three water plates found ∆T (115a−good (Tin25% 90 F− 70 d:d = Tout − Tair = 30.83º ∆T 115 − 70 u = = = 0.44 ⎛ ⎞ that’s 20 in. high and 64 in. long has a between the published heat output ratln ⎜− ⎟ T −− T90 Tout Tair 70 − 70 listed output of 15,829 Btu/h - more ⎝ in air)⎠ 90 −115 115 115 − 90 ( 90 70 ( ) ings of most panel radiators, based on 1.3 u∆=Td = = = 30.83º F= 0.44 ∆ Td = = 30.83º ⎛ 30.83 ⎞ F ⎛ 115 − 70 ⎞ 115 − 70 ⎞115 − 70 T − T than enough. the2500 ∆Tln 112F rating conditions, and ⎛ in air ⎟ 112 ⎜ ⎟ d=⎜⎝=Q 90 − 70 ln ⎜ ⎝ ⎠112 ⎠ ⎝ 90 − 70 ⎟⎠ Thanks for hanging in there through the estimated output when operating 1.3 115 − 90 the the panels in the1.3range of 105-110F av30.83 ⎞ ∆ =TdQ112 = ⎛⎜ = 30.83º F math. Think of these formulas like 2500 ⎛ 30.83 ⎞ ⎟ −115 90⎠ − 170with erage Next, set115 up 2500 =water Q112 ⎜ temperature. ⎝ 112 ⎛Formula ⎞ all the your tools. Used properly they get you to ⎝ 112 ⎟⎠ ∆ Td = information, 1.3 = 30.83º F ln ⎜ known including ⎛ 30.83 ⎞−⎞70 ⎟⎠ the re- the results you need. In this case they ⎛ 115 ( 2500 ) = 13, 374 Btu ⎝ −9070 2500 = Q ln Q = ⎜ ⎟ the 112 ⎜ ⎟ lower water give you accurate ways to select panel 112 quired heat output at WORKING BACKWARDS 1.3 ⎝ ⎝90112 hr − 70⎠ ⎠ ⎛ 30.83 ⎞ radiators that are compatible with low Now that2500 to reduce the temperature (e.g., 2,500 Btu/h): ⎟⎠ how Btu ( ⎜⎝you ) know 112 Q112 = = 13, 374 1.3panel temperature hydronic heat sources like heat output of radiators operating hr ( 2500 ) = 13, 374 Btu ⎛ 30.83 ⎞ ⎜⎝ ⎟⎠ 1.3 Q = 112 1.3 geothermal or air-to-water heat pumps. at lower 112 water temperatures let’s con⎛ 30.83 ⎞ ⎛ 30.83 1.3 ⎞ hr 2500 Q That’s a good skill to have as hydronics sider a typical sizing calculation where 30.83 ⎜⎝ (=2500 ⎟ ⎜ ⎟ ⎛ ⎞ 112 ⎠) ⎝ ⎠ Btu 2500 ⎟ 112 ⎜ 1.3 =112 Q112 == Q112 13, 374 technology evolves. <> you need to select a specific panel for a ⎝ ⎞112 ⎠ hr 30.83 ⎛ specific design load. ⎜⎝ ⎟ 112 ⎠ Consider a room with a design load of This can be solved for the necessary John Siegenthaler, P.E., is 2,500 Btu/h. The selected panel radia- output at the ∆Td=112F a licensed professional tor will be supplied with water at 115F, engineer. His latest book 2500 Btu 2500 Btu and operate with a 25F temperature is Heating with Renewable Q=112 = =374 13, 374 1.3 Q = 13, 112 1.3 drop. The room temperature will be 70F. Energy (hydronicpros.com ⎛ 30.83 hr hr ⎛ 30.83 ⎞ ⎞ Use the above information to select two for more information). ⎜ ⎜⎝ ⎟ ⎟⎠ =

=

=

1.3

112

112

1.3

( ( (

) ( ) )( ( )

(

) (

(

(

( ( )

)

) )

)

)

)

⎝ 112 112 ⎠

MH30

FALL 2021

MODERN HYDRONICS

WWW.HPACMAG.COM

www.caleffi.com

®

DIRTMAG PRO DIRT SEPARATOR WITH

40% MORE POWER

Caleffi pioneered the magnetic dirt separation market in North America over 10 years ago with DIRTMAG®.

Now say hello to DIRTMAG® PRO – our latest advancement in ferrous and non-ferrous debris separation.

Containing powerful, dual magnetic fields and a redesigned collision mesh, DIRTMAG PRO delivers 40% more power for greater efficiency in dirt removal. The debris blow-down valve makes serviceability simple, keeping your hands clean. CALEFFI GUARANTEED.

PEAK-PERFORMANCE HEATING SYSTEMS ComboMax ULTRA An electric boiler and instantaneous water heater: a combination without compromise.

VoltMax Increased temperature control.

Increased power control. The ideal electric boiler for your commercial projects.

BuffMax Optimize any type of hydronic system with the BuffMax buffer tank.

TurboMax The instantaneous indirect water heater with unmatched exchange capacity, exceptional hot water quality and a lifespan of more than 30 years.

Bth ULTRA and MINI The reliable and efficient electric boiler available in compact sizes for your residential needs.