Electronic Products and Technology November December 2011

SCAN HERE

POWER SUPPLIES & BATTERIES

electronic products and technology - NOVEMBER-DECEMBER 2011 electronic products and technology

AN EP&T SPECIAL REPORT PAGE 8

CONTRACT MFG SERVICES & PRODUCTION EQUIPMENT Page 12 OK INTERNATIONAL

THERMAL MANAGEMENT & ENCLOSURES Page 14 PENTAIR

DATA ACQUISITION & SENSORS Page 18 AGILENT TECHNOLOGIES

Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: Business Information Group, 80 Valleybrook Drive, Toronto, ON M3B 2S9 circulation@ept.ca

omega.ca, of Course!

Where do I go for Data Acquisition Products?

Your single source for process measurement and control products!

Où puis-je troOù puis-je trouver des produits de saisie des données?

Sur omega.ca, bien entendu!

Votre source unique en produits de mesure et de contrôle des procédés Four Virtual Instrument Applications: Strip Chart—Oscilloscope—Function Generator—Rate Generator Quatre applications d'instruments virtuels: Enrregistreur à bande déroulante - Oscilloscope - Générateur de Fonction - Générateur de Fréquence 8-Channel Thermocouple/Voltage Input USB Data Acquisition Modules Modules USB d’acquisition de données à 8 canaux, entrées thermocouple/tension

OM-USB-TC Series/Série Starts at À partir de $ 329

n esolutio 24-Bit Rn de 24 bits o Résoluti

OM-USB-TC and OM-USB-5201 Have 8 Thermocouples Inputs OM-USB-TC et OM-USB-5201 avec 8 entrées thermocouple Visit/Visitez omega.ca/om-usb-tc

© Kutt Niinepuu / Dreamstime.com

Long Distance Industrial Wireless Transmitters and Receivers Transmetteurs et récepteurs industriels longue distance sans fil UWXL Series/Série Starts at/Á partir de $ 395 Visit/Visitez omega.ca/uwxl

Thermocouple Data Logger with LCD Display and USB Interface Enregistreur à thermocouple avec ACL et interface USB OM-EL-USB-TC-LCD $100

50 m Up to 4 ine of L ') 0 0 (15 ange Sight R

en ligne P o rté e d e 4 5 0 m visuelle 00 pi) (15

te g ra tu i

Visit/Visitez omega.ca/isd-th iSD-TH Series/Série Starts at À partir de $495

!

Visit/Visitez omega.ca/zseries zSeries/Série Starts at À partir de $95

Visit/Visitez omega.ca/ om-el-usb-tc-lcd

Environmental Surveillance Over the Internet Surveillance environnementale sur Internet

!

E E R F

Wireless Sensor System Ethernet or Internet Connection Système de sondes sans fil Connexion Ethernet ou Internet

Portable Data Logger Enregistreur de données portatif OM-SQ2010 Series/Série Starts at À partir de $1540

Visit/Visitez omega.ca/om-sq2010

Transition Joint Thermocouple Probe Sonde à thermocouple à joint de transition TJ-USB Series/Série Starts at À partir de $95 Visit/Visitez omega.ca/tj-usb

Over 150 full color pages covering 7 product categories in automation, sanitary, temperature, electric heaters, wireless/data acquisition, pressure and flow Plus de 150 pages en couleurs couvrant les 7 catégories de produits suivantes; automatisation, sanitaire, température, éléments chauffants électriques, acquisition de donnée/sans fil, pression et débit

976 Bergar Laval, Québec Canada H7L 5A1

For Sales and Service, Call TOLL FREE pour les ventes et le service - composez

SM

Dilbert © United Feature Syndicate, Inc.

http://ept.hotims.com/34487-1

Because of transmission frequency regulations, these wireless products may only be used in the United States and Canada (915 mHz models) or Europe (868 mHz models).

En raison de la réglementation des produits de fréquences de transmission, ces produits ne peuvent être utilisé qu' aux Etats-Unis et aux Canada (915 modèles MHz) ou en Europe (868 modèles mHz).

© COPYRIGHT 2011 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED © COPYRIGHT 2011 OMEGA ENGINEERING, INC. TOUS DROITS RESERVES

00

e d i t o r i a l electronic products andtechnology technology electronic products and Volume 33 Number 8 November-December 2011

Stephen Law Editor 416.510.5208 slaw@ept.ca

David Boss, P.Eng. Contributing Editor

Sohail Kamal

West Coast Correspondent

Joanna Malivoire

Peter Loney

Account Manager Direct: 866.868.7089 jmalivoire@ept.ca

Publisher 416.510.5207 pdloney@ept.ca

Steve Jobs leaves electronic imprint on industry There is little doubt of the impact Steve Jobs, the iconic co-founder of Apple Inc. has left on the consumer electronics space. Almost as recognizable as the Apple brand itself, Jobs truly represented a marketing giant.

While Jobs himself admitted that long-time biz partner Steve Wozniuk was the true engineering brains behind the computing giant – it was clearly Jobs who drove the marketing bus. In fact, it is incredible when you consider Apple’s business model.

For most supplier / customer relationships within the electronics OEM sphere, it is the customer that demands change and redesign from its suppliers. However, this tech titan was masterful at creating products that consumers desired.

Remembered for - among many other things – was his showmanship and larger-than-life public persona. In Jobs, Apple had an unparalleled marketing guru. His return to the helm of Apple after a 10-year absence and its corporate resurgence only reinforced his importance in guiding the computing behemoth.

There’s little doubt that Apple has done better than most of its competitors while playing in the challenging, commodity business, selling PCs, digital music players, phones and tablets - products susceptible to severe price erosion. Much of that success can be attributed to Apple’s ability to not only selling

a product, but providing an experience. In fact, Jobs proved that it was possible to compete without concerning himself so much with the issues of razor thin margins. He demonstrated that by going the extra mile to create products that truly resonate with buyers, they will gladly pay a premium and stand in store lineups to buy them.

Much has already been penned and debated about the man who transcended electronics. According to biographer Walter Isaacson, Jobs believed that technology was individually empowering. With pending tablet price wars looming and critics underwhelmed by the recent release of the iPhone 4S, Apple will no doubt face the challenge of changing tides of the consumer electronics market – albeit without its omnipresent leader.

So much of electronics has been and will continue to be about engineering and only time will tell if the man’s legacy will continue to shape the technological landscape.

Stephen Law, Editor slaw@ept.ca Follow me on Twitter http://twitter.com/#!/EPTmagazine

intelligent EMI/RFI protection for your application

CONEC Filter Connectors

Tracy Lelyk

Art Director Group Administrator 416.510.5120 tlelyk@ept.ca

Tracey Hanson

Production Manager 416.510.6762 thanson@bizinfogroup.ca

Bona Lao

Subscription Inquiries 416.442.5600 ext 3552 blao@bizinfogroup.ca

Phyllis Wright

Print Production Manager

Bruce Creighton President

Alex Papanou Vice President

Tim Dimopoulos

Executive Publisher

EP&T (Electronic Products & Technology) is published nine times per year: Monthly in February, May, August, September, October, Bi-Monthly January/February, March/April, June/July, November/December by: 80 Valleybrook Drive, Toronto ON M3B 2S9 info@ept.ca Website: www.ept.ca Tel: 416.442.5600 Fax: 416.510.5133 Sales: 416.510.5207 • Editorial 416.510.5208

ISSN 0708-4366 (Print) • ISSN 1923-3701 (Online) Subscription Rates: Canada: $52 per year, US: $78 per year, International: $125 per year

Editorial Purpose: Electronic Products & Technology provides timely, comprehensive coverage of the latest worldwide developments and trends in electronic products, equipment and systems, and interprets their significance to manufacturers and end-users in the Canadian marketplace.

Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: EP&T Circulation Dept., 80 Valleybrook Drive, Toronto, ON M3B 2S9, Subscription Inquiries: 416.442.5600 x3552 • circulation@ept.ca EP&T (Electronic Products & Technology) assumes no responsibility for the validity of claims in items reported. © 2011 This publication or any part of it may not be reproduced, stored or transmitted in any form whatsoever without the express written consent of the publisher. From time to time we make our subscription list available to companies and organizations whose products and services we believe may be of interest to you. If you do not want your name to be made available, please contact EP&T with your subscription number.

Printed in Canada We acknowledge the financial support of the Government of Canada through the Canada Periodical Fund (CPF) for our publishing activities.

SCAN HERE

www.pmr-werbung.de 0 8/11/11104

BIG Magazines LP, a div of Glacier BIG Holdings Company Ltd.

00

Integration of connectors with filter saves space on the printed board and reduced EMI/RFI problems.

CONEC offers a wide range of connectors with single and multi-level filter technology. Today CONEC connectors are a compact component of optimal screening concepts.

• Filter D-SUB connectors • Filter Combination D-SUB connectors • Filtered 7W2/9W4 Connectors for µTCA Power Supply • Filter Adapters • Filter Plates • Customer Specific Filter Applications • IP67 protected Filter Connectors

for EP&T’s Digital Edition CONEC Corporation

CONEC 125 Sun Pac Blvd.

343 Technology Drive Brampton • Canada L6S 5Z6 Garner, NC,Ontario USA 27529 Tel. +1 Tel. +1 905 919 790 4602200 8800• Fax +1 905 790 2201 Fax +1info@conec.com 919 460 0141 E-Mail E-Mail info@conec.com

Scan Here

w w w. c o n e c . c o m www.conec.com

http://ept.hotims.com/34487-2

003

400

representatives and distributors

NEWSWATCH N E W S WAT C H NEWSWATCH electronic products and technology • november-december 2011

Harting establishes subsidiary in Canada

In an effort to deepen its relationship with Canadian customers, German-based connector manufacturer Harting has created a direct sales presence in Saint-Laurent QC. By establishing Harting Canada Inc., the firm recognizes the importance of its Canadian customers and assumes a larger role in helping them maximize their competitiveness, says Rolf Meyer, president and CEO of Harting North America. As a pioneer in the industrial connectivity markets, Harting focuses on building strong relationships with Rolf Meyer, president and its customers and creating leading edge solutions.

CEO of Harting North “Now that we have boots on the ground, we want to America, poses with persuade the Canadian market to see Harting in a different Claude Gravel, sales light - not only as a leading innovator and brand, but also manager responsible as a local partner that delivers the best value proposition: for the newly opened Canadian sales office in quality, price, reliability, and longevity,” Meyer says.

Saint-Laurent QC. The Harting Technology Group, privately owned and based in Germany, employs over 3,300 people globally across its 36 subsidiaries. With production facilities in Europe, Asia and the United States, the HARTING portfolio of connectivity solutions focus on multiple levels from the machine to the device and into the communication infrastructure. The US plant in Elgin, Illinois is of one of three HARTING locations that manufactures the HIS product line and custom cable assemblies. The company’s core business is intelligent and highperformance connection technology.

Chipworks partners with Elysium Digital, expands software related patents Ottawa-based Chipworks has entered a partnership with Elysium Digital, LLC complementing its semiconductor expertise to support systems and software patent licensing.

The deal also expands Chipworks’ existing capabilities relating to software analysis and software reverse engineering.

This partnership is one example of how Chipworks is “thinking outside the chip”, according to company president Julia Elvidge. “The landscape of high tech patent licensing is growing in complexity as a result of technology advancements, convergence, and greater competition,” Elvidge adds. “Often, when multiple systems elements are involved, clients come to us because we can select and combine the optimal investigation techniques, from chip analysis through board analysis and functional analysis to software reverse engineering. Our partnership with Elysium helps us meet this need by extending our ability to assist more clients requiring software related patent analysis and evidence of use documentation.”

Power Conversion Leaders in high-efficiency power conversion, POWERSTAX provides innovative solutions from vast engineering experience for demanding applications such as military, medical and mobile equipment.

DC-DC Bricks

To 500W POWERSTAX patented technology Over 90% full-load efficiency 90W/in³ power density

AC-DC Bulk Power Front Ends To 4000W in 1U; 6,000W in 2U 19” rack houses 3 modules N+1 Redundancy

AC-DC Configurable To 1450W 4 and 6-module versions Up to 12 outputs

Atlas-iST provides integrated circuits with test services Montreal-based Atlas Micro Electronics (AME), a global corporation in the hi-tech electronics supply chain segment, has formed a partnership with Integrated Service Technology (iST) Group, a professional integrated circuit quality test center. The partnership will be known as Atlas-iST International Ltd, offering original factory integrated circuit components and cost-effective quality test services to electronic original equipment manufacturers (OEMs) globally.

The electronics industry is being affected by the amount of counterfeit parts being sold to OEM’s, hampering their ability to produce quality products. To guarantee the authenticity of an OEM’s purchased electronic components, Atlas-iST provides the services and specialized test equipment of iST Group Test Centers located in China and Taiwan to accurately validate component quality and origin, according to Tony Fama director of sales. A comprehensive and professional test report is provided to the buyer or engineer for acceptance and authorization prior to shipping. Test parameters include visual inspection, 3D magnification, X-Ray imaging, pin assignment, de-capsulation, die identification, lead (Pb)-Free, and functionality testing, confirming quality and that the product is genuine.

“Proven test methods conforming to IEC, JEDEC and EIA standards, are used to differentiate between new factory original products from refurbished and/or counterfeit parts.

By leveraging our long standing and strong relationships with direct factory channels our customers can rest assured parts supplied, will meet their product quality and reliability requirements”, says Fama.

Philanthropist Schulich launches $100 million scholarship for Canadian universities Toronto philanthropist Seymour Schulich will create a $100 million dollar scholarship – the second largest in Canadian history -- to benefit post-secondary students at 20 universities in Canada and 5 in Israel.

The scholarship is designed to motivate students to enter what are being called ‘STEM’ subjects’ including science, technology, engineering, and mathematics. Schulich, the driving force behind the scholarship, said “my hope is that after a successful pilot this initiative will help ensure Canada and Israel are at the forefront of excellence in science and research for generations to come.”

“Science and technology are the principal drivers for a country’s economy where education, fuelled by strong math, is essential for national and global economic performance,” Schulich adds.

All graduating high school students and CEGEP students in Canada who are planning on studying the ‘STEM’ subjects are eligible for the $60,000 dollar “Schulich Leader” scholarship. Each winner of the scholarship will receive $15,000 a year.

The pilot program will be launched in 2012, when 20 Canadian Universities and five Israeli Universities will each give out one scholarship. It will rise to 75 scholarships by 2014.

Nova Scotia seeks world’s best clean technology The search is on for the world’s best clean technology start-ups and the goal is to bring them to Nova Scotia.

An international competition designed to find and fund high-potential, early-stage clean technology companies has been launched by Halifax-based Innovacorp, the Province’s technology commercialization agency. Nova Scotia CleanTech Open will also put a spotlight on this Atlantic Province as an ideal location for these companies to grow.

“Clean technology is one of the world’s fastest growing industries. Knowledge-based companies like those in the clean technology sectors create good jobs and are vital to Nova Scotia’s future prosperity,” says Percy Paris, Minister of Economic and Rural Development and Tourism. “This competition supports the innovation and competitiveness priorities of jobsHere, our plan to grow the economy.”

The winner receives $100,000 in cash, a $200,000 negotiable seed investment, mentoring, and in-kind business building services, including one-year free rent of turn-key space at the Innovacorp Enterprise Centre in Halifax. At the time the prize is awarded, the company is to be incorporated in Nova Scotia, with the intent to build the business here.

“Nova Scotia has a lot to offer emerging clean technology ventures, from clean energy resources to a supportive business and policy environment,” adds Clifford Gross, president and CEO of Innovacorp. “Now we’re adding venture capital coupled with business support services to help accelerate growth and market success for these companies.”

Entrepreneurs have until 5pm on December 1, to submit their entries. The judging panel will select a short list that will be invited to move on to round two of the competition. Submissions can be made online at www.novascotiacleantech.com.

ABB to build an astronomical measuring instrument IRWIN Industrial is proud to be the exclusive Canadian Representative for POWERSTAX

Connectors & Cables Mechanical Hardware Optoelectronics Power Products Printers & Labelling Protection, Suppression & Shielding Switches & Relays Thermal Management Wire Management

Electronic Components & Hardware 800-263-3562 irwin-ind.com

Calgary, AB Vancouver, BC

Richmond Hill, ON HQ

Montreal, QC Rochester, NY

Provider of power and automation technologies ABB, has been granted a $2.3 million contract from Laval University in Québec City for its Wide-field Imaging Fourier Transform Spectrometer project.

Also known as SITELLE (Spectromètre Imageur à Transformée de Fourier pour l’Étude en Long en Large de raies d’ Émission) the instrument incorporates a number of leadingedge technologies and will be installed on the renowned Canada-France-Hawaii (CFH) telescope. It is one of the most scientifically productive telescopes in the world, located 4,200 metres above sea level at the top of Mauna Kea on Hawaii’s Big Island.

In building this measuring instrument, ABB will work in close collaboration with Dr. Laurent Drissen’s team at Laval University. It will open to the heavens for the first time in the spring of 2013, and will be able to analyze light coming from space with a power that no other spectro-imager used in astronomy provides.

SITELLE is an improved version of the SpIOMM (Spectromètre imageur de l’Observatoire du Mont Mégantic – Mont Mégantic Observatory Imaging Spectrometer) that was developed jointly by Laval University, the Canadian Space Agency and ABB. SITELLE will also benefit Canadian astronomers and the international astronomy community. In fact, some of its technological advances may be found in a similar instrument planned for the new generation of weather satellites used to predict hurricanes and tornadoes and measure environmental pollution.

http://ept.hotims.com/34487-3

full online product listings at.ept.hotims.com

http://ept.hotims.com/34487-4

6

newswatch

electronic products and technology • november-december 2011

Arrow locates global HQ in Colorado Electronic component distributor Arrow Electronics Inc. has moved it global headquarters from Melville NY into its Colorado operations. With 2010 revenues of $18.7-billion, Arrow has had a significant presence in Englewood, Colo., since 2000. The move becomes effective Nov. 15, 2011.

“With our Colorado operations serving as Arrow Electronics’ global headquarters, our commitment to our employees, customers and suppliers remains the foundation of our strategy to create value for our shareholders,” says Arrow chairman, president and CEO Michael Long. “As we embark on the next phase of the company’s history, we look forward to Colorado being the headquarters for the 52 countries that we serve.”

The Englewood facility has served as the global base for the company’s Enterprise Computing Solutions, Americas components and global services businesses.

“Our New York operations will continue to play a key role in the company,” adds Long.

“Our global reach and local touch serve as a differentiator with our more than 115,000 customers and 1,200 suppliers around the world. We are looking forward to continuing our tradition of excellence from our new headquarters in Colorado.”

Mouser launches solar technology PKC training site Mouser Electronics Inc., Mansfield TX, recently launched a Solar Technology Product Knowledge Center (PKC) training Website for electronic design engineers.

The site, found at http://www.mouser.com/solar_technology, serves as a helpful knowledge base for the newest solar applications while showcasing the newest products and latest technologies. Engineers can learn more about the various categories of solar technology, such as solar micro inverters, photovoltaic wiring, connector systems, junction and combiner boxes, solar disconnect switches and feed-in breaker circuits. With a simple click, they can view the newest products from top manufacturers to support these systems and applications.

Disty adds 2 new principals Nordic Semiconductor ASA has added Mouser as one of its global distributors of its ultra low power wireless solutions.

With immediate effect, Mouser will now supply Nordic’s entire range of 2.4GHz and 433/869/915MHz ISM (industrial, scientific & medical) band solutions including the the nRF24LE1 and nRF24LU1+, nRF2460 Audio Streamer, nRF905/nRF9E5 Multiband ICs, ANT nRF24AP2 Series, Bluetooth low energy µBlue nRF8001, and various supporting reference designs, development tools, and design kits.

Mouser also reached a worldwide distribution agreement with International Rectifier (IR), specialists in semiconductor power management technology. With Mouser, customers will have access to detailed product knowledge microsites for IR’s newest products including digital, analog and mixed-signal ICs, power systems and discrete power components.

west tech report

Fast growing Alberta MEMS company competes against global giants Preciseley is a fast growing “fabless” component company, working with third parties to manufacture in-house designed products which are sold to the global marketplace. Based out of Edmonton, Alberta, their core business has been selling MEMS mirrors that they design in-house. MEMS (micro-electroWest Tech mechanical systems) are a technology platform where miniature mechanical Columnist, and electro-mechanical structures are made using the micro-fabrication equipSohail Kamal ment originally developed for the microelectronics industry.

Preciseley sells these mirrors principally as variable optical attenuators, tuneable filters, and optical switches for the telecommunications industry, though they also have potential for use in displays and optical imaging applications. I recently caught up with Steve Buswell, product manager at Preciseley, and asked him the following: What makes Preciseley so successful?

“Customer demand has been the driving factor in our growth,” says Buswell, “though just recently we have also garnered funding from provincial and federal government sources to take on projects that strategically add value to our existing products.”

What is your niche – what size companies do you serve?

Preciseley’s customers tend to be large manufacturers in the telecommunications module and component industry. As a small company they work with partners and customers to ensure that they can deliver the quality of products which are expected in such a demanding and aggressive industry.

Anything new coming up?

The focus of the company is to expand their patent portfolio and refine the underlying technology. “We don’t have any new product announcements that we can share publicly but expect soon to demonstrate some new product applications through our website at www.preciseley.com.” says Buswell. Preciseley will have a booth at SPIE Photonics West and OFC/NFOEC conferences in the upcoming year.

Any words of advice for a budding tech entrepreneur?

“My impression is that we have done well because we have been targeted in our approach.

We have picked our focus and we have carved that niche extremely well. In a demanding field such as this success is derived from excellence,” says Buswell. Many start-ups would learn this lesson well, as Preciseley is in direct competition with global companies, so they have to be focused to adequately satisfy their customers. At times, it is advisable to avoid the temptation of accepting proposals that do not fit your competitive strengths, which provide short term revenue, but in the long run, erode your core competencies.

Follow-up, Wave 2011

Digi-Key adds two principals to linecard Electronic components distributor Digi-Key Corp., Thief River Falls MN, has reached a global distribution agreement with two new principals recently, including LS Research Cedarburg WI, a wireless product development firm specializing in RF design, software development and FCC/IC/CE certification services.

LS Research delivers turnkey wireless solutions with product development, EMC testing and certification, and RF modules. LS Research’s module offering includes state-of-the-art FCC/IC certified and ETSI tested WiFi, Bluetooth, 802.15.4, and ZigBee 900 MHz, 2.4GHz and 5.8GHz (WiFi) devices, antennas, ProFLEX and ModFLEX modules Digi-Key also reached a global distribution agreement with the US subsidiary of Taiwan-based Macronix International Co., Ltd. Macronix provides a broad range of NOR Flash memories with parallel and serial interface. As a market leader in Serial Flash, the firm provides one of the widest NOR Flash product portfolios in the industry. Macronix delivers 5 V, 3 V and low voltage products in a variety of package options to meet customer requirements. All products are built at Macronix’s in-house fabs and meet the all quality & reliability standards, including TS-16949 for automotive applications.

In other news, to follow up our last article, Western Canada’s ACAMP held their Wave 2011 Conference in Lake Louise AB, bringing together global business leaders and innovative companies to discover current opportunities with investable technology products.

The event worked out really well with attendees from 9 countries, 12 keynotes, and 75 company presentation. Keynotes included Shell, Siemens, Bayer, BASF, Sony, Lockheed Martin, Harris & Harris, SMART, VTI, Alberta NewsPrint, Maple Leaf Foods and Corning.

Breaking from convention, keynote speakers stayed for the entire conference and were available for one-on-one meetings during the three day conference.

ACAMP’s CEO, Ken Brizel, thanks everyone for their attendance as they look forward to the next Wave conference in 2013.

BIRDE Marketing expands Toronto sales team BIRDE Marketing Inc., Toronto has expanded its Toronto-area sales team with the recent appointment of Ivo Demarchi.

With extensive experience in connector and electronic component sales, Demarchi has held senior management positions at several Canadian national component distributors. He is responsible for sales in the greater Toronto area and the Kitchener-Waterloo area, which has grown considerably in the past few years.

BIRDE Marketing is a passive electronic component representatives and distributor with offices in Toronto, Montreal Ottawa and Vancouver.

EMI/RFI Shielding Solutions Work Directly with the Leading U.S. Manufacturer of EMI Shielding Standard and Custom Products

Photoetching Improves Board Level Shielding Design Flexibility without Expensive Tooling

Fast Delivery Tech-Etch maintains a large inventory of standard fingerstock shielding for immediate delivery. In addition, an extensive free sample program enables functional testing of the part specified. Interactive PDFs for all fingerstock profiles are available on the website to create customer sales drawings.

BeCu Expert Fingerstock Customer Service Gaskets are Experienced Customer offered to close Service Reps provide fast gaps as narrow as .010". computerized quotations.

Product Engineers are BeCu always available to answer Contact Rings can be fabricated shielding questions. from Finger Stock New Website in a range of profiles.

Visit our new website for complete shielding Honeycomb Vents product information and use lightweight to request free samples extruded aluminum of our standard shielding frames for products. increased strength.

● Photoetching process and Universal Form tooling enable complex shields to be delivered in just a few days. ● SMT or Through Hole Mounting features in any configuration. ● Internal dividers for multi-cavity designs. ● No tooling charges for standard designs.

1-Piece Standard Designs save time ● Through holes and slots and money. PDF sales drawings for heat dissipation at on website. no charge. ● New Low-Profile SlimShield. Heights as low as .060". ● Wide range of materials and finishing options.

2-Piece Standard Designs have fence and separate cover.

PDF sales drawings on website.

● Soldered or resistance welded seams.

www.tech-etch.com/shield

USB solutions specialist Future Technology Devices International Ltd. (FTDI) has bolstered its sales presence across North American by signing a distribution deal with Allied Electronics, Fort Worth TX. FTDI’s range of USB connectivity solutions is the broadest in the industry, including USB converter chips and cables for connecting with legacy RS232, RS422, RS485 and CAN-based serial interfaces, the Vinculum and Vinculum-II USB 2.0 Host/Device controller chips with high performance integrated processor cores, the Morph-IC-II module for reconfiguring FPGA-based embedded systems via USB and the Arduinoinspired Vinco development platform.

Nu Horizons signs Samsung LED

New Low-Profile 2-Piece Standard Designs as low as ● Never an additional charge for depth etched .060". PDF sales drawings on website. logos or part numbers.

Download EMI/RFI Shielding Product Catalog at

Allied Electronics to distribute FTDI

ISO 9001:2008 REGISTERED

TECH-ETCH, INC., 45 Aldrin Road, Plymouth, MA 02360 • TEL 508-747-0300 • FAX 508-746-9639

Nu Horizons Electronics, Melville NY, has signed a distribution agreement with Samsung LED, a global leader in LED technology. Under the agreement, Nu Horizons customers around the world will have access to Samsung LED’s complete portfolio of energy-saving, long-life and environmentally friendly mid-power and high-power LEDs along with indoor and outdoor light engines.

http://ept.hotims.com/34487-5

full online product listings at.ept.hotims.com

SEARAY

™

Dense. Fast. Versatile.

Up to 500 I/Os on .050” grid array for maximum routing flexibility.

Rugged Edge Rate™ contacts lower insertion/withdrawal forces.

Stack heights from 7mm to 40mm.

Right angle interconnects for micro backplane and coplanar applications.

LP Array™ for 4mm to 5mm stack height; .8mm pitch design saves board space.

SUDDEN SERVICE http://ept.hotims.com/34487-6

8

electronic products and technology • november-december 2011

Power Supplies & Batteries

Green is not always black & white Sometimes it’s RED!

By Jerry Rosenstein, president & COO, Pioneer Magnetics Inc.

Green is a great colour. The movie industry has used green slime to frighten adults. Kermit the Frog has become a positive icon for children. Editors frequently use green as the new primary color on magazine covers and at the same time, advertisers, regardless of the product, find ways to incorporate green into the message.

The variety of shades and hues has conjured up a feeling of life, a sense of tranquility and, perhaps, best of all, money.

More recently, green equates to ecology and efficiency. Industries associated with pollution, chemical run-offs and contaminated land, tout ‘green’ changes in corporate philosophies. Corporate CEO’s claim innovated technologies geared to clean the environment and meet new or stricter standards.

The auto industry is in overdrive with its new hybrid, electric or battery operated vehicles. Provinces are offering incentives to homeowners willing to convert to a solar house. Companies not normally associated with green technologies have jumped onto the bandwagon. EcoTravel agencies are now attracting new clients.

Office supply companies now sell green packing material such as green ‘peanuts’ and green recycled paper products. Even power supply companies have entered the EcoArena.

Green is the color of choice!

Several years ago, Pioneer Magnetics (PMI) recognized that its customers would be looking for innovative ways to reduce costs. Procuring greater material quantities, evolving to LEAN manufacturing techniques, automating and producing product offshore would not be sufficient to meet required cost reduction targets. PMI determined that a redesign of current and future power supplies geared for more efficiency might provide the desired cost reductions, as well as

meet future green initiatives.

Most high-end switching power supplies have efficiency ratings in the 88% to 90% range. Some power supply companies have struggled to get product efficiencies to 91% or even 92%. Like trying to run that sub four-minute mile or break the sound barrier, each incremental step of efficiency improvement takes a significant amount of time, experimentation, money, energy and perseverance. Eventually, that evasive threshold is crossed. With standards continually evolving, the effort to traverse that > 92% efficiency barrier may soon be upon us.

From a historical standpoint and heralded as ‘the big efficiency breakthrough,’ the 1970’s saw the use of Gallium arsenide in the manufacturing of semiconductors. Because of its higher bandwidth, it had great promise for high frequency electronics. Although widely used in the microwave industry, optical electronics and for making high frequency ICs, it was deemed that the next application would result in higher voltage components with higher speeds than silicon – a perfect fit for power electronics. Unfortunately, the Gallium arsenide-based power components turned out to be more expensive than anticipated. This was supposed to be the foundation for “the device of the future.”

With silicon still dominating the market, there was another technological breakthrough. It was Silicon carbide.

Traditionally, power components are manufactured using straight silicon. Once again, there was a large marketing campaign by the semi-conductor industry claiming that power supply designers were choosing Silicon carbide-based components as the best design approach for the next generation of power supplies.

Semiconductor manufacturers touted that characteristics such as high breakdown electrical field strength, wider band gaps and higher current densities translated into a smaller, less expensive and a better quality solution for those power supply companies striving to meet green initiatives, increased efficiencies and lower costs for the end-user. The SemiCon manufacturers even stated that NextGen (silicon carbide) semiconductors [YBK1] would not only become the platform for power supplies but for other green products as well.

So, if the silicon carbide-based components were so attractive, where are the brass bands? Why aren’t the flags waving?

Why isn’t there a long line of power supply customers around the block for that super efficient power supply? Once again, the technical soothsayers were wrong.

Assume that power components represent about 20% of the bill of material

5 kW Power Supply Material Labor Total 40%

Cost Cost Cost Margin

Cost 3.5x Per Material Watt

Cost Per Watt

BOM with straight silicon

$400

$400

$800

$1333

$.27

$1400

$.28

BOM with silicon carbide

$600

$400

$1000

$1633

$.33

$2100

$.42

To put the higher silicon carbide cost in perspective and what it means to the power supply customer, assume these hypothetical domestic cost projections.

cost for a typical switching power supply design. Using a PMI product as a reference, it turns out that for a given family of power supplies having the same power range (wattage), the cost for the silicon carbide power components may be 3X or even > 4X more expensive than the conventional, straight silicon components.

And that’s when PMI gets “quantity” quotes from its supplier.

Two approaches were used to calculate cost per watt – a 40% margin and a material multiplier. Interestingly, there is no industry standard used to calculate a selling price. Some power supply companies use a margin based on material costs (only), a combination of material and labor costs or, in a few cases, a multiplier against the material cost. There may not be a right or wrong approach. The key, of course, is profitability on a particular program. In any event, it’s clear that the cost of Silicon carbide is a significant factor in pricing out a power supply.

“It’s not easy being green” Besides the Silicon carbide-based component cost increase, there are other issues. Similar to Gallium arsenide, Silicon carbide has a higher band gap and the forward drop losses (for our industry) are not acceptable if efficiency, size and temperature ratings are critical.

Size or the overall dimension of a product now comes into play. Not surprisingly, the market is ignoring technical reality with its new efficiency specifications. The end-user continues to pressure the power supply manufacturer to reduce the overall dimension of a power supply, as well as the cost, in the same breath expects better efficiencies. Unfortunately, there is an inverse relationship between size and efficiency.

With improved efficiency, there are indirect temperature issues. More efficient power supplies mean less heat.

However, the smaller the power supply, the harder it is to dissipate heat.

Therefore, the (indirect) increased temperatures require more heat sinking. More heat sinking requires more aluminum – all of which requires a larger product case to handle the dissipation of heat.

Using some of PMI’s products as an example: • 8 kW = 75 kilohertz = small package (387.5 sq. inches) • 10 kW = 50 kilohertz = slightly larger package (437.3 sq. inches) • 15 kW to 30 kW = 15 kilohertz = larger package (2018.9 sq. inches) Then, there is the frequency issue coming into play. Higher frequencies usually result in smaller magnetic components, but the switching losses may reduce efficiency. Therefore, by reducing the frequency, efficiencies may improve but the product will then result in larger magnetic components. To further exasperate the situation, switching causes a loss of joules or power.

The key, of course, is to minimize cost-increase percentages, finding ways to keep the power supply from growing in size while striving to achieve the required increase fraction of efficiency. In addition, the customer continues to dictate that there is a time-to-market issue. As the ‘Time-to-Ship’ clock ticks away, it’s continued on page 11

http://ept.hotims.com/34487-7

full online product listings at ept.hotims.com

power supplies & batteries

electronic products and technology • november-december 2011

600V IGBTs optimized for variable speed motor control Automotive-qualified 600V IGBTs are optimized for variable speed motor control and power supply applications used in electric and hybrid vehicles.

Devices cover a broad current range and offer a short circuit rating of ≥5µs, low Vce(on) and positive Vce(on) temperature coefficient for various motor drive systems from electric air conditioning to main traction inverters requiring high power density from 24 to 160A. Products include square reverse bias safe operating area (SRBSOA), integrated soft recovery diode and junction temperature of 175C (max.).

INTERNATIONAL RECTIFIER http://ept.hotims.com/34487-50

Power supply module carries permits node switch to environment 750-606 24Vdc supply module provides 1A (max) for firm’s I/OSystem Ex-i modules and carries IECEx-i certifications. Device permits one WAGO-I/O-SYSTEM node to serve hazardous and non-hazardous environments by separating intrinsically and nonintrinsically safe sections. This provides hazardous applications with fieldbus-independence and a cost-effective connection to sensors/actuators in Zones 0 and 1. Product monitors power supply to downstream EX-i I/O; on-board diagnostics and auto-reset fuse minimize in-thefield service. Approximately 10 seconds after a fault is cleared, the electronic fuse automatically re-activates output voltage.

WAGO

Isolated power solution protects input/output TPSi1075 isolated PC/104-Plus dc-dc power solution provides input and output protection, dc-dc conversion and system reliability, especially in embedded applications.

Product provides efficiency up to 94%, galvanic isolation and a wide input voltage range. With active input voltage clamping, high voltage transient suppressors, reverse polarity and short circuit protection, device provides improved system isolation and performance. Product delivers industry standard outputs, remote on/off control and extended operating temperature.

TRI-M TECHNOLOGIES http://ept.hotims.com/34487-53

Lithium manganese dioxide battery capable of high current pulse discharge CR-AG Lithium manganese dioxide double-A battery provides long term reliability and is capable of high current pulse discharge. Product provides a wide operating temperature (-40 to 70 Celsius) and a high safety and energy density. Device delivers a typical 2400 mAh capacity and a nominal 3V voltage with an approximate weight of 22g.

PANASONIC http://ept.hotims.com/34487-54

http://ept.hotims.com/34487-51

4–10 Watt ac-dc converter mounts on chassis Traco Power TMP 4–10 watt ac-dc power module converter series include fully encapsulated power supplies in an ultracompact module. Products mount easily to chassis with screw terminal block connection or direct pcb mounting with solder pins. Full compliance with International safety standards for industrial control equipment qualifies the products for worldwide markets.

POWER SOURCES UNLIMITED http://ept.hotims.com/34487-52

newswatch

Murata & Powervation team-up for digital reference design Powervation Ltd., Ireland-based pioneer in adaptive digital power management IC solutions has joined forces with Murata Power Solutions, San Jose CA, to co-develop a new reference design for Murata’s 45 A Power Block.

The CEB019 digital dc-dc power solution uses Powervation’s newly-launched PV3012 dual phase digital synchronous buck controller with Auto-Control, which provides a real-time, adaptive loop compensation that helps to overcome issues related to variations in external components, temperature and user layouts, without significant design effort and support.

w w w. e p t . c a

http://ept.hotims.com/34487-8

9

power supplies & batteries

10

electronic products and technology • november-december 2011

150 Watt power supply complies with Level V efficiency

90-110 Watt external power supplies are medical-certified

Skynet SNP-G12 Series of 150 Watt switchers (120W Convection Cooled) in a high-density 4.00 x 2.00 x 1.28” open-frame package provides high efficiency operation, low standby power consumption for compliance with Level V Efficiency Standards and compliance to medical or ITE safety approvals. Product series consists of seven models with single output voltages ranging 12-48Vdc and an auxiliary output of 12V @ 200mA. All models feature Universal ac Input (90-264Vac) with active power factor correction; high efficiency operation up to 91%.

POWERGATE LLC

Range of medical-certified ac-dc external power supplies with output power ratings from 90 to 110 watts are EISA and CEC Efficiency Level V compliant.

The DTM110-C series operates with a universal ac input of 90 to 264Vac (47-63Hz) and include PFC. Typical operating efficiencies are greater than 85%.

Available output voltages include 12V, 13.5V, 15V, 19V and 24V. Units are packaged in low profile and insulated enclosures that measure 2.55” wide by 6.7” long by 1.51” high and are convection cooled (no fans needed). The operating temperature range is 0 to +40°C at full load with no deratings required.

TDK-LAMBDA AMERICAS

http://ept.hotims.com/34487-55

http://ept.hotims.com/34487-58

200Watt ac to dc power supply fits in 3x5 footprint CINT1200 product family with 200 watts of output power and eight different models ranging from 12 to 48V. The single output embedded device accepts an input range of 90 to 264Vac, with more than 90% efficiency plus convection cooling. With less than 1.3” in height and compact size, the product fits easily into 1U chassis, CE marked to low voltage directive and approved to ITE standards by safety agency regulatory bodies.

SL POWER ELECTRONICS

Step-down dc-dc converter widens input range VLA313-2450A isolated dc-dc converter is designed for use as a step-down device from a rectified ac line between 380 and 600Vac and has a capacity of 50 watts. The accessory product reduces design time and shortens time to market.

Device provides an input voltage range of 400V~ 900Vdc and output power of 50.4 watts.

POWEREX

http://ept.hotims.com/34487-59

http://ept.hotims.com/34487-56

Step-down dc-dc switching charger ICs boost efficiency, safety

High-voltage rectifiers boost efficient power conversion STPS60SM200C 200V power Schottky rectifier diode can be used in high-current ac-dc power supplies delivering nominal dc output voltages in the 30-50V range. Its 200V maximum reverse voltage is compatible with known worst-case operating conditions and provides the design margins needed to withstand over-voltages and remain fully operational down to -40C. Product integrates two interconnected diodes in a three-pin package to provide a more energy efficient alternative to ultra-fast diodes, which typically have higher conduction losses.

EP&TSTMICROELECTRONICS G2+2994 11-2011 10/10/11 10:00 AM Page 1 http://ept.hotims.com/34487-57

AS3610/11 battery charger ICs for Li-Ion batteries in mobile devices provide fast and highly efficient charging of Li-Ion batteries in mobile devices with up to 1.25A A output current. The step-down dc-dc devices include numerous safety and protection features, internal current measurement, and USB Host/OTG (on the go) boost mode operation. The AS3610 dc-dc provides an I²C interface for external control and the AS3611 operates independently.

AUTRIAMICROSYSTEMS

SPDT switch requires low insertion loss RF1602 Broadband single-pole dual-throw (SPDT) switch requires very low insertion loss, high isolation and high power handling capability coupled with minimal dc power consumption. Device’s performance has been optimized for cellular applications demanding stringent linearity requirements. Device has low frequency to 3.5GHz operation and insertion loss of 0.3dB at 1GHz. RFMD http://ept.hotims.com/34487-61

http://ept.hotims.com/34487-60

3

n o i t a v o n n I

es er modul w o p C D of DC/ e p a h the s g n i g han c e ’r We

MTU1

1 Watt isolated DC/DC converter

MTU1S 0505C XYYWW

 Footprint reduced Accepts 4.8mm micro lithium batteries Ideal for miniature electronic devices Low Profile Low contact resistance Withstands shock and vibration Gold Plated Accommodates lead free & low temperature reflow soldering • Available on Tape and Reel • Unique design for vacuum pick & place

Part Number

Scan Here RoHS Compliant

~ ISO 9001 Certified

®

EMX Enterprises Ltd Vancouver • Toronto • Montreal Tel: (905) 764-0040 • 1-800-268-6822 Web: www.emx.ca • e-mail: sales@emx.ca http://ept.hotims.com/34487-9

 Lower running

50%  56% less power dissipation

• • • • • • •

QR CODE HERE

MTU1S0505MC MTU1S0509MC MTU1S0512MC MTU1S0515MC MTU1S1205MC MTU1S1209MC MTU1S1212MC MTU1S1215MC

Actual size

temperatures  Load regulation from 3.2%

Vin

Vout

Iout

V 5 5 5 5 12 12 12 12

V 5 9 12 15 5 9 12 15

mA 200 111 83 67 200 111 83 67

Efficiency (Typ.) % 83 86 87 87 84 87 88 88

Load Regulation % 7.3 6.1 5.6 5.3 5.6 3.9 3.5 3.2

murata-ps.com/mtu http://ept.hotims.com/34487-10

full online product listings at ept.hotims.com

power supplies & batteries

electronic products and technology • november-december 2011

Green is not always black & white continued from page 8

fascinating to see design engineers struggle and then incrementally achieve 91.1%, 91.2%, 91.3…., 92% efficiency levels. Yet, when all is said and done, engineering designs may be compromised unless there is a technological break-through.

PMI engineers recently had an ‘ah ha’ moment while working on a customer’s (new) efficiency requirement. Never ignoring customer’s challenges and working with key component suppliers, PMI’s engineering department went to work using known and unique design approaches with its development of a new power supply a 10kW (3U) unit that will soon become a platform for a family of 10kW products.

Knowing that higher efficiencies translate into a larger product, PMI engineering determined that choosing the right kind of diode would be critical.

Schottkey diodes have some impact in improving efficiencies. Conversely, ORing diodes reduce efficiencies and create many issues when it comes to heat dissipation. However, ORing FETS may turn out to be a better solution for some products resulting in size and cost reduction.

Using what is known and trying different design techniques, PMI engineering strove for that extra incremental percent. The end result was that PMI’s engineers developed another approach, which is expected to help the industry cross the efficiency threshold, resulting in a new standard.

One of the integral aspects of the 10kW design was the use of a different type of power component. It’s anticipated that most of PMI’s newer product lines, which tend to be low voltage-high power and with power ranging from 1000 to 30,000 watts, will soon

go through design changes using the new efficient technology.

Although 100% efficiency may never be achieved, design engineers will find ways to reduce enough switching losses to ultimately yield a real 94%. Most likely, efficiencies of 96% and 98% will be obtainable in the near future. In the meantime, the additional semiconductor cost does not justify the price especially when product size, heat dissipation and minimal power losses come into play.

Solar panels savings may provide a pay back within 10 to 15 years. ECO-friendly cars are too expensive for the environmentally conscious driver who is trying to reduce costs. Homeowners expecting to get a free ride by putting power back into the grid will not see any ROI in the near future. Highly efficient power supplies that are small and inexpensive may not be readably available next month. However, being able to cross the threshold into purchasing the NextGen (eco-friendly) power supply may be nearer than we think. How soon, time will tell.

For more information on power supplies from Pioneer Electronics Inc., go to http://ept.hotims.com/34487-62

SCAN HERE

High density 3000W dc-ac inverters deliver up to 3000VA

Low profile rectifier simplifies solar panel design

PRP-3000 Series of efficient, pure sine wave inverters provide up to 3000VA of power and has versions that meet industrial (EN60950) or rail (EN50155) standards. Standard input voltages of 24Vdc, 36Vdc, 48Vdc, 72Vdc, and 110Vdc are inverted to adjustable 120Vac or 230Vac outputs that are regulated to 4% or better. Units can be configured for three phase synchronization. All models provide overload protection and an LED indicator for output OK or alarm conditions. A wide operating temperature of -25C to +70C allows for installations in extreme conditions and meets EN50155 Class 3.

SCHAEFER POWER

SBR12U45LH Super Barrier Rectifier (SBR) comes in the low profile PowerDI-5SP package. The 12A rated device has a maximum package height of 0.75mm, enabling it to be integrated within the solar panel, removing the need for separate junction boxes. With package-side located leads, the PowerDI-5SP can be mounted into recesses in the back layers, adding only 0.21mm to total solar panel depth.

DIODES INC.

Miniature 30W dc-dc converter mounts on pcb ULS series of open frame, pcb board mount 30 Watt isolated dc-dc converters provide a 2:1 input voltage range of 36 – 75Vdc (48Vdc nominal). The miniature sixteenth-brick DOSA compatible device measures 33.27 x 23.11 x 8.13mm. Product comprises two models providing either a 12 or 15Vdc output. ULS-12/2.5-D48 12Vdc output model can provide up to 2.5A output and is suitable for use in regulated intermediate bus applications. 15Vdc model provides up to 2A. The output may be trimmed within +10% to -20% of nominal Vout allowing the user to compensate for voltage losses.

The series provides tight line and load regulation of +/- 0.125% providing an extremely stable output without the need for any additional external components. An On/Off control input provides the choice of configuring for either negative or positive polarity.

MURATA http://ept.hotims.com/34487-63

DD

filtered power entry modules packed with functionality

http://ept.hotims.com/34487-65

http://ept.hotims.com/34487-64

newswatch

3M and Umicore expand license agreement 3M and Umicore have entered into a second technology license agreement that further expands the use of nickel, manganese and cobalt (NMC) cathode materials in lithium-ion batteries.

Under the agreement, 3M grants Umicore license to a family of low cobalt NMC cathode material compositions for manufacture and sales to lithium-ion battery manufacturers for automotive and consumer electronics applications.

The battery cathode compositions composed of nickel, manganese, and cobalt, covered by this agreement, offer a balance of power, energy, thermal stability and low cost. NMC cathode materials can meet demanding customer requirements ranging from highenergy handheld consumer electronics to high-power (hybrid) electric vehicles. For large format battery

applications; the thermal stability of NMC cathode compositions contributes to improved battery safety performance thereby, enabling a lower total battery system cost.

Analytic Systems marine products ABS certified Analytic Systems, Delta BC, has begun the process of certifying its marine specific power conversion products to ABS standards.

Responding to its commercial marine reseller’s network in North America, Analytic Systems’ has certified the BCA1505 (a 1500W AC charger); the BCA310 (a 300W AC charger); the IPS300 dc-ac inverter (a 300W inverter) and the VTC315 (an isolated dc-dc 300W converter).

Saft unveils lithium-ion battery plant Saft, global manufacturer of high-tech industrial batteries, kicked off production at its highly advanced and automated lithium-ion battery factory in Jacksonville FL. Saft estimates that half of the high-volume plant will be devoted to building advanced lithium-ion cells and batteries for renewable energy storage; the other half will be dedicated to smart grid support, broadband backup, transportation, military and other applications. With more than 100 workers currently employed, another 200 are to be added over the next two years as production expands. The firm maintains that Jacksonville will play an important part in the development of the new-energy economy, while meeting growing customer demand for high performance and competitive energy storage solutions.

www.schurterinc.com/new_pems

DD12 and DD22 integrate a 1- or 2-pole shocksafe fuseholder, switch and standard or medical low leakage filter into one compact pre-wired power entry module.

- DD12 panel mount – quick connect terminals - DD22 PCB mount – pcb solder terminals - Ideal for low profile designs, especially 1RU enclosures - current ratings up to 10A @ 250 VAC - switch inrush current up to 100 A - illuminated switch available - shocksafe fuseholder for 5x20mm fuses - qualified acc. IEC 60950 and IEC 60601-1

http://ept.hotims.com/34487-11

w w w. e p t . c a

11

12

electronic products and technology • november-december 2011

Contract MFG Services & Production Equipment In-circuit tester capabilities boost productivity for highvolume manufacturing

Air dusters formulated as new eco-friendly class ITW Chemtronics Typhoon Blast and Typhoon Surge are a new class of dusters specifically formulated with HFO1234ze, a new material that has a significantly lower global warming potential (GWP) than previous materials.

Products are plastic safe, completely nonflammable and ozone safe. Typhoon Blast provides high output force to remove tightly bound particles of dust, dirt, and oxides from live electronic equipment. Typhoon Surge is a lower output duster solution.

EMX ENTERPRISES

U9401B model Medalist i1000D in-circuit test system for boosting productivity in the high-volume electronics manufacturing environment includes new a functional test suite. Product’s external applications integration allows easy integration of external applications onto system. Unit can be easily programmed to provide customized follow-up actions based on the pass/fail test results of the printed circuit board assemblies being tested. Unit provides an inline automatic board handler to boost throughput by 20%.

AGILENT TECHNOLOGIES

http://ept.hotims.com/34487-70

Jtag/boundary-scan tool debugs, repairs

http://ept.hotims.com/34487-66

High magnification X-Ray inspection solution delivers high rez images phoenix x|aminer is a 5-axis, microfocus X-ray inspection system developed for quality control applications in the manufacture of electronics sub-assemblies, especially accurate inspection of soldered joints. Product provides two megapixel high resolution and high magnification, while its imaging software makes intuitive programming and component manipulation precise and easy using a computer mouse or joystick. System’s oblique view high magnification (ovhm) module allows an oblique angle view of up to 70° as well as a total magnification of up to > 23,000x.

GE SENSING & INSPECTION http://ept.hotims.com/34487-67

Solder pastes capable of long pause-to-print NC258 Lead-Free and Tin-Lead Solder Paste provide long pauseto-print capabilities, while enhancing fine print definitions.

Product reduces defects such as voiding and head-in-pillow.

Product’s wetting ability results in bright, smooth and shiny solder joints, while providing very low post-process residues that remain crystal clear even at the elevated temperatures required for today’s lead-free alloys.

AIM http://ept.hotims.com/34487-68

Vacuum handling kit serves small parts Small part vacuum handling kit (TV1000-SP8BD-MAG1) can accommodate small parts. The compact, general-purpose unit plugs directly into 110 V 50/60Hz and will handle a variety of optics, ball lenses and SMT parts. The kit includes a set of rubber tipped vacuum tips, as well as a set of eight small parts tips. A vacuum tweezer eliminates lost parts associated with mechanical tweezer handling. The long-life diaphragm vacuum pump generates up to 10” of mercury with an open air flow of 2.3 lpm.

VIRTUAL INDUSTRIES

http://ept.hotims.com/34487-69

CUSTOM MOUNTS, FILTERS, & COMPONENTS Standard Lens Mounts, Filters, Filter Rings, Step Rings, Adapters, Spacers, Special Metric Taps and Dies, and other Lens Mounting Accessories. Over 60 years of custom design and manufacturing experience.

1000s of Lens Sizes in Stock.

Most Lenses Ship Same Day. From PrototyPe to Production SINCE 19 4 9

UK Aoptics.com 516-624-2444 info@ukaoptics.com

AutoBuzz JTAG/boundary-scan test and debug tools uses firm’s own ‘seek and discover’ feature to scan completely a compliant design and then perform comparative tests using JTAG/boundary-scan. With only JTAG scan-chain information plus BSDL models of the JTAG/IEEE std 1149.1 compliant parts (available from manufacturers’ web-sites), users of AutoBuzz will be able to connect to their designs via a number of compatible JTAG interface options. Product can then be set to gather a complete ‘connectivity map’ of any board’s boundary-scan to boundary-scan pin connections (where these can be direct or via ‘transparent’ devices such as series resistors).

JTAG TECHNOLOGIES http://ept.hotims.com/34487-71

All-in-one tool strips all cable types 15018C All-in-One Stripping Tool includes coax replaceable cassette blades that are pre-set and no adjustment is required. Unit is adjustable and covers a wide range of twisted pair Cat5 and Cat6 cables, as well as round cables. Product has built-in cable cutter and includes braid comb, Velcro, for folding the braid back over the cable jacket PLATINUM TOOLS

http://ept.hotims.com/34487-72

Fibre optic cleaning kit suits rugged environment Sticklers Fibre Optic Cleaning kit ensures fibre optic equipment is kept clean, especially in harsh or miliatry environments. Packaged in a small and portable bag, the kit contains items require to ensure cleaning of fibre optic connectors and splices is quick and effective. Product is safe to use in all environments and does not have any restrictions when transporting.

STICKLERS

http://ept.hotims.com/34487-73

Applicator tool dispenses liquid flux to tiny chip components Cobrush flux applicator is a precise and handy tool for applying liquid flux to tiny chip components, as well as individual solder joints. Product puts flux only where it is needed, in the right amount and suitable for applying liquid no-clean fluxes to any site that needs to be soldered. Device is disposable and compatible with many different types of fluxes. Its fine bristle tip allows the user to apply flux to very small areas in densely populated assemblies. Applicator cuts down on waste and prevents overfluxing.

COBAR SOLDER PRODUCTS http://ept.hotims.com/34487-74

PC repair toolkit assists computer technician PB Swiss Tools 8220 PB Computer Repair Toolkit is designed for repair technicians and field service personnel to install, maintain and troubleshoot PCs, workstations and more.

Product enables users to perform all of the basic repairs on computers and workstations. The kit can be used for lastminute gaming upgrades.

COUNT ON TOOLS http://ept.hotims.com/34487-75

© 2011 Universe Kogaku (America) Inc.

http://ept.hotims.com/34487-12

full online product listings at ept.hotims.com

contract mfg services & production equipment

electronic products and technology • november-december 2011

Semi-automated bonding system is accurate to 3µm FinePlacer matrix ma semi-automated bonding system provides 3µm placement accuracy across large substrates such as 12 inch wafers, which opens an extra wide spectrum of possible applications. Product provides high accuracy, generous working distance, innovative detail solutions such as tool shifting, HD process video module, the process integrated CleverDispense system, automated processes. Unit delivers preconditions for three-dimensional stacking of hybrid sub-assemblies like MEMS/ MOEMS and various C2W applications.

FINETECH

http://ept.hotims.com/34487-76

Light/moisture-cure conformal coating cures rapidly 9481-E a UV/moisture-cure conformal coating improves circuit protection in coating applications that require ambient shadowed-area cure.

Solvent-free product provides key benefits versus solvent-based and heat-cured coatings including faster throughput, increased production capacity and floor space, maximum material usage, and lower annual operating costs. Product provides rapid secondary moisture cure that guarantees cure on all areas of the board.

DYMAX

UV laser cutting, depaneling service handles multiple materials A UV laser cutting and depaneling service specializes in the ablation of ultra-thin metals, plastics, rigid and flex materials. Laser cutting technology enables increased complexity in design, higher cut quality and the ability to maintain tighter tolerances. Firm provides tight tolerance laser cutting solutions for a wide range of industries, fulfilling both prototype and production needs. A wide range of materials can be cut on the UV laser systems, from polyimide to precious metal to thermal.

Additionally, these materials are seen with adhesive combos or clad and bonded.

A-LASER

http://ept.hotims.com/34487-81

Defluxer and degreaser is non-flammable, ozone-friendly SuprClean defluxer and degreaser is non-flammable, ozonefriendly and easy to ship and store. These contact cleaners are used in mining applications where flammability concerns are significant. Product’s formulation and packaging of ultra-clean chemistries provides increased confidence that the extraction data is accurate.

MICROCARE http://ept.hotims.com/34487-82

http://ept.hotims.com/34487-77

Precision dispensing valves handle multiple viscosities Pcb layout software speeds design, improves communications CADSTAR Placement Planner software helps electronic engineers communicate intent and provide guidance to the pcb designer more effectively, without time-consuming iterations that can cause unnecessary delays. Product improves design flow between logical design and pcb layout, whether conducting placement studies for space planning or defining the location of critical components. Product defines placement of critical components to optimize board performance and design space early in the design process, while managing schematic and layout reuse blocks to improve design cycle time.

ZUKEN

TS250 entry-level precision valves are suitable for general dispensing applications, while capable of dispensing a wide range of fluid viscosities. Units are immediately usable with its accompanying tools, accessories and universal power supply.

TECHCON SYSTEMS http://ept.hotims.com/34487-83

http://ept.hotims.com/34487-78

Desoldering system comes with upgrade option MFR-1150 Desoldering System for production assembly specialists is launched with MFR-UK5 upgrade kit and enables assemblers to transform existing MFR systems into shop air desoldering systems.

Product adds a shop air desoldering option to the MFR range of solder and rework tools. Incorporating a built-in power supply, desoldering hand-piece and unique venturi workstand, the system includes an increased vacuum suction force of 25” Hg or 0.85 bar. System also has a hand-piece that can be used in two different configurations, either a pencil style or pistol grip.

OK INTERNATIONAL

The finest line of workstations ever assembled.

http://ept.hotims.com/34487-79

Reusable sticky mat prevents self-contamination Clean Walker Reusable Sticky Mat (Model# CW-900B) prevents selfcontamination. The soft and thick Polyurethane Gel’s strong adhesive power effectively collects dirt and dust particles from the bottom of shoe soles. Unlike conventional disposable sticky mats, the product’s elastic gellike surface effectively gets into the tiny grooves of shoe soles to remove contaminates. Simply unroll the mat and place at the desired location, as both sides are adhesive and cleans with water.

Comes in a standard size of 500mm x 900mm, is 5.1mm thick, weighs 5.3 lbs 2.4 kg.

VESSEL TOOLS http://ept.hotims.com/34487-80

Lista workstations for electronic and assembly operations can be configured for maximum productivity.

Lista workstations are designed to let you configure and reconfigure quickly and easily. Maximum flexibility and productivity – go configure!

COMPLIMENTARY DESIGN SERVICES Need a custom solution to precisely fit your unique space and usage requirements?

Register at www.listaintl.com/ListaWorks10 or call 800-722-3020 for your free ListaWorks™ survey and design.

http://ept.hotims.com/34487-13

w w w. e p t . c a

13

14

electronic products and technology • november-december 2011

Thermal Management & Enclosures

Plastic electronic enclosures Solutions for extreme customization

By David Crooks, general manager, Fibox Enclosures Inc.

Rather than create a custom package, OEMs often choose to modify or customize a standard enclosure to lower development cost, reduce final product cost and achieve a faster time to market.

Seeking a customized solution, OEMs request enclosure manufacturers to do precision machining of standard units.

The trend toward packaging multiple functions into a single enclosure has increased the complexity of these modifications. While this trend appears to limit using standard enclosures, in reality, advances in customization methods have increased using modified standard enclosures, and in particular, plastic enclosures.

Let’s examine three designs that resulted in extreme customization. We’ll take them in order of increasing complexity.

Figure 1 shows the modified front cover of a Fibox CAB enclosure. The rectangular cutout for the readout and round holes for tactile-feedback pushbuttons require critical positioning as they mate to a printed circuit board assembly mounted using the four countersunk holes. Other groupings of precision hole patterns mount optional peristaltic pumps. The enclosure base also has extensive customization on all four sides.

An overlay is applied to the cover, sealing all openings and restoring the ingress rating of the enclosure.

The modifications for this OEM consisted of precision hole patterns requiring tight tolerances on multiple sides of the enclosure. The next application goes beyond.

APPLICATION #1 Customized enclosure for liquid process control This OEM develops liquid automation machinery based upon innovative chemical metering. The unit contains an operator interface, a power supply, pump and metering control modules and optional externally mounted peristaltic pumps.

APPLICATION #2 Customized enclosure for water level detection This OEM develops indirect fluid level measuring instruments, based upon innovative radar technology. A compact package for moderately hostile environments was needed for a new design.

Figure 2 shows a Fibox MNX enclosure

with extensive modifications. The large rectangular cutout holds an LCD display and the round holes below mount tactilefeedback pushbuttons. Threaded metal standoffs mount the operator interface.

Additional modifications for this OEM required precision holes and cutout patterns on four sides of the cover and two sides of the base. Using a secondary operation, threaded standoffs were pressfit into the cover interior for mounting electronic printed circuit boards.

Our third application moves the bar even farther.

APPLICATION # 3 Color customized enclosures Use of color is the ultimate extension of extreme customization. Color is often associated with application function, e.g. safety related equipment. There are specific colors associated with industry segments, e.g. the solar industry prefers light colored (often white) enclosures.

An OEM’s brand identity is often defined by specific colors. Color provides uniqueness and differentiation, and OEMs are demanding more cost-effective implementation of custom color.

Figure 3 shows three applications of custom color. The blue enclosure is used for equipment monitoring water chemistry for the commercial swimming pool industry. The red enclosure is used for fire alarm pump control equipment. The white enclosure is for the solar industry. All of these enclosures also have extensive customized precision hole patterns.

The entry point for custom color is dependent on unit volume. The good news is that manufacturers of non-metallic enclosures are continually reducing that entry number with new cost-effective color molding techniques.

Steps for customization success 1. Initiate early contact with the enclosure manufacturer.

The engineer should look for a manufacturer with a wide selection of standard enclosures. The manufacturer’s technical staff can guide the engineer to the correct enclosure for the application.

2. Verify the manufacturer’s level of customization expertise.

Most enclosure manufacturers offer customization, but achieving extreme customization in high ingress rated enclosures requires greater expertise and equipment designed for the task. This is especially true for custom color molding.

3. Understand the factors impacted by cost.

Engaging the manufacturer early is crucial. Understanding what is possible, and what it costs, ensures that selecting extreme customization over a custom enclosure is the correct choice.

FIG. 1: Customized Fibox CAB enclosure for liquid process control.

FIG. 2: Customized Fibox MNX enclosure for water level detection.

http://ept.hotims.com/34487-14

FIG. 3: Color customized Fibox ARCA enclosures.

continued on page 16

http://ept.hotims.com/34487-15

full online product listings at ept.hotims.com

Extruded Aluminum Enclosures Achieve the look and feel of extruded aluminum with the convenience, speed, and flexibility of Protocase.

• Highly customizable • Built to your design in 2-3 days • No minimums - as low as quantity ‘one’!

These enclosures offer the benefits of extruded aluminum, with enhanced flexibility and customization.

Choose any of our available finishes, as well as cutouts, fasteners, or any other hardware. Or go with your own fully custom design based on the extruded side rails. We will build your enclosure for you in 2-3 days, in the quantity you require, as low as 'one'.

Learn more about our Extruded Aluminum Enclosures at

P R O TO C A S E

Custom Electronic Enclosures For Engineers & Designers

www.protocase.com/extrudedaluminum

Phone: 1 (866) 849-3911

E-mail: info@protocase.com

http://ept.hotims.com/34487-16

16

thermal management & enclosures

electronic products and technology • november-december 2011

Thermal imager works on temperature range of -20 to 1200C OSXL160 thermal imager is versatile and provides a temperature range of -20 to 1200C. Device provides special features like voice annotation, analysis software, FLASH memory storage, USB connection to PC and a colored thermal image with sounds and alarms. Product provides power, range and versatility in a lightweight, rugged, handheld body.

OMEGA

Flexible candlestick sensor measures temperature MS 1000-CS-WC flexible, robust candlestick sensor simultaneously measures both temperature and air velocity for characterizing thermal conditions in electronic systems. The device is narrow and low profile to minimize disturbance of heat flow in the test domain. Its flexible, plastic-sleeved stem eases installation and repositioning during the testing process. It has a plastic base to eliminate any potential shorting issues. Multiple sensors are easily installed to thoroughly map a system’s thermal and airflow conditions. The use of a single sensor to measure both temperature and velocity eliminates errors that can occur when airflow is non-isothermal.

ADVANCED THERMAL SOLUTIONS http://ept.hotims.com/34487-87

http://ept.hotims.com/34487-84

Thermal management solution enhances conductivity HTCPX Non-silicone Heat Transfer Compound provides enhanced thermal conductivity, while offering minimal oil bleed and low evaporation weight loss.

The thermal management solution has been specially formulated by using a proprietary additive to provide a significant increase in thermal conductivity without sacrificing the viscosity or film thicknesses.

ELECTROLUBE http://ept.hotims.com/34487-85

Common mode inductors enhance EMI suppression

Spot curing system boosts productivity

CMT-8100 Series common mode inductors provide rugged construction and materials for high-temperature applications. Device’s advanced magnetics eliminate common noise to all lines in power supply designs. Products enhance EMI suppression over a wide frequency spectrum and a high current capacity.

Meeting VDE, IEC, UL, and CSA requirements, devices minimize ac line transmitted interference often created by high frequency switching power supplies.

Normally placed close to the input power source, devices are constructed with reliable UL rated materials.

TRIAD MAGNETICS

iCure AS200 Spot Curing System is an inline fiber optic system that provides heat by Infrared radiation in a portable unit, delivering pinpoint and accurate control for temperature sensitive substrates and complex devices. Product uses infrared light to generate heat and combines the advantages of thermal curing with the practicality of spot curing.

Device can be used to spot cure thermal epoxies; bond and fix plastic and glass components; temporary fixing of miniature components; precision assembly and bonding of semiconductor components; focused energy for micro soldering; and localized heat welding of thermoplastics.

IR PHOTONICS

http://ept.hotims.com/34487-88

Floor-mount type 4 enclosures come with two doors Hoffman two-door, floormount type 4 enclosures are available in four 18-in. deep models (Bulletin Number A4L3). The product line includes a UL Type 4 rating, suitable for use in indoor or outdoor environments where it is necessary to protect controls and instrumentation from wet, potentially corrosive environments. A4L3 enclosures utilize firm’s Powerglide handle with three-point latching for secure closure. The latching system provides sufficient compression to meet UL Type 4 requirements without the use of quarter-turn latching, offering security as well as easy and quick access.

PENTAIR http://ept.hotims.com/34487-86

Thermal gap filler pad removes easily Sarcon 50G-Hm high-performance, low resistance gap filler pad is manufactured with a special low-tac top surface. The one-sided treatment is less sticky than the opposing surface allowing the thermal pad to adhere to either the target electrical component or opposing heat sink. This allows for quick and easy removal without ripping, warping or damaging the interface material. Product transfers heat with a thermal conductivity of 6.0 W/mK and a very low thermal resistance of .16Cin2/W at 72.5 PSI. The 0.5mm thick, flame retardant TIM is available in sheets up to 300mm x 200mm.

FUJIPOLY AMERICA http://ept.hotims.com/34487-89

Heatsink for high power densities boosts heat dissipation MV/MA 302 heatsink for applications requiring high power densities and where forced air cooling is present, provides improved heat dissipation. The longer, more efficient fin extrusions provide nearly twice the thermal performance as firm’s smaller MV/MA 102 product. Device is 2.2” across by 1.71” tall and uses the same installation mechanism which provides two internal spring clips for mounting up to four TO-247 or TO-264 devices.

OHMITE http://ept.hotims.com/34487-90

Epoxy preforms deliver low outgassing properties NEMA 4X IP 67 RoHS Compliant

http://ept.hotims.com/34487-17 FX14EPT1106OL.indd 1

Line of uni-form epoxy preforms are highly cross-linked pre-shaped thermoplastics that release minimal amounts of trapped gasses or condensable material under vacuum conditions and elevated heat. With a typical total mass loss of 0.35% and typical collected volatile condensable materials of 0.03% (tested per ASTM-E-595-93), products meet NASA requirements for most spacecraft materials. Uni-forms are pre-shaped, one-part resins that are solid at room temperature. When heated, Uni-forms melt and cure, forming a consistent seal.

MULTI-SEALS

http://ept.hotims.com/34487-92

Skived fin heatsink carved from single block of material Customized heatsinks made using Skived Fin process combines special cutting tools and a controlled shaving technique to produce heatsinks from a single block of material, such as copper or aluminum.

The typical result is a thin-finned heatsink, with a dense population of uniformly shaped and distributed fins. In certain applications, Fin Skiving serves efficiency cooling alternatives to high aspect ratio extrusions and folded fin assemblies.

RADIAN HEATSINK http://ept.hotims.com/34487-93

Extreme customization continued from page 14

4. Design using the manufacturer’s documentation and CAD files.

Enclosure manufacturers supply CAD files for their enclosures. Using the manufacturer’s files ensures dimensional accuracy, simplifies drawing interpretation and eliminates errors.

Despite adding density by packaging multiple functions into a single enclosure, despite adding complexity and precision to modifications, despite more demanding environments, OEMs find that customized standard enclosures continue to increase their cost-effectiveness.

For more information on customized enclosures for electronic applications from FiBox Electronics Inc., go to http://ept.hotims.com/34487-94

SCAN HERE

http://ept.hotims.com/34487-91

9/29/06 1:21:25 PM

full online product listings at ept.hotims.com

products on review

electronic products and technology • november-december 2011

Rotary code switches withstand high-temperature soldering

Low-side MOSFET pre-driver IC suits automotive market

P65 series of rotary code switches represent a high temperature version of firm’s PT65 dual in-line package (DIP) coded rotary switch. Device is specially designed for high temperature soldering and suitable for modern assembly processes. Product is available in both surface mount technology (SMT) and throughhole technology (TH). The contact paths have abrasion-resistant gold plating. With a mechanical lifetime of 30,000 steps, and is available in 4, 6, 10, and 16 positions. The switches are 6.5mm Height, 10 Width and 10 Length.

APEM COMPONENTS

A3944 low side MOSFET pre-driver IC is a programmable 6 channel low side MOSFET control IC, with a 50V rating on drain feedback inputs. Due to the extensive diagnostics and wide operating voltage range the device is targeted at the automotive market, plus consumer and industrial applications. Each channel is controllable by a combination of parallel and serial inputs and provides sufficient gate drive current to allow PWM control up to 10kHz, depending on the MOSFET gate charge.

ALLEGRO MICROSYSTEMS

http://ept.hotims.com/34487-95

http://ept.hotims.com/34487-101

TCVC crystal oscillators lower jitter and current ratings THA4 Series of Stratum-III Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) provide low jitter and low current. The precision frequency signal generators provide CMOS output in voltages from 2.8v to 5.0v in a 5x7 mm LCC ceramic package, with a 3.2 x 5mm ceramic package also available. A number of commonly used frequencies are currently available, including 10.0 MHz, 19.2 MHz, 19.44 MHz, 20.0 MHz and 26.0 MHz with other frequencies being developed. Product series provides stability of ≤0.28 ppm over temperature range and 24-hour holdover ≤0.37 ppm. All parts are RoHS 6 /6 and GR-1244CORE compliant and with control linearity in accordance with MIL-PRF-55310.

PLETRONICS http://ept.hotims.com/34487-96

Oscilloscope delivers quick overdrive recovery, low noise RTO Series Oscilloscope ensures high-signal fidelity when measuring the dynamic ‘on’ resistance of power FETs (field-effect transistors). Providing fast overdrive recovery, low front-end noise, and the highest effective number of bits (ENOB) available in its class, the product allows users to overload the scope without distorting the measurement. Unit provides a sophisticated A/D converter for acquiring signals, which significantly reduces distortion and provides a high voltage per division setting, while enabling an ENOB value of seven.

ROHDE & SCHWARZ

http://ept.hotims.com/34487-102

Key-insert switch stands up to harsh transportation use

Miniature snap-action pushbutton switch quickly, extend life ALCOSWITCH Blue Series miniature pushbutton switches for power and signal applications. Devices incorporate an innovative snap-action mechanism that produces an extremely fast switching moment. The high level of dynamics reduces arcing and bounces, while providing a high number of electric lifecycles.

In addition, the push-on/push-off version of the switches produces a clear tactile, audible feedback to indicate that they have been properly pressed.

TE CONNECTIVITY http://ept.hotims.com/34487-97

PIM cable assemblies provide 181 dBc of intermodulation Intermod Squad series of PIM cable assemblies provide intermodulation performance as low as -181 dBc with an eSeries 7/16 connector terminated on TFlex-402 cable. Typical performance across the lineup of assemblies terminated with eSMA and eSeries Type N’s is -162 dBc. The eSMA cable assemblies perform DC-20 GHz and the eSeries Type N cable assemblies perform DC-18 GHz. The assemblies are phase and attenuation stable, provide excellent shielding, support UL/NEC Plenum class CMP, are corrosion resistant and are low in weight and highly flexible.

SAN-TRON

Series 04 stainless steel key-insert switch for durable performance in transportation applications comes in transit authority key shapes and provide increased security. Device is designed for durability, capable of performing up to .25 million switch cycles without failure. It is protected to IP67 standards and will operate reliably in temperatures from -45C to +85C. Device separates functions according to direction in which it is turned. Twist one way for function A; the other way for function B. EAO http://ept.hotims.com/34487-103

LED chip prototypes enhance performance OSLON Black Flat and OSRAM OSTAR Headlamp Pro LED prototypes combine chip and package technologies to provide high light output (even at high currents), a uniform light pattern, thermal stability and a particularly good contrast ratio. Matched to the requirements of headlight systems, devices are designed to provide enhanced performance and optimized cost.

OSRAM http://ept.hotims.com/34487-104

http://ept.hotims.com/34487-98

Boxed film capacitors lower ESR MHBS Series of metalized polypropylene film capacitors includes an expanded range of capacitance values from 0.68 to 150°F and 10 different termination styles, including 2, 4 or 6 radial leads and various lug-type terminations. Voltage ratings up to 460ac and 1275WVdc are available. Device’s ESR characteristics vary from 7.1 to 22.5m, depending on values, with perating temperature ranges from -40C to +100C. ILLINOIS CAPACITOR http://ept.hotims.com/34487-99

Timer relay module is user-configurable 859 Series DIN-rail timer relay module provides On-/Off-delay timer modes and multiple time ranges for diverse applications such as switch and package “debounce” sensors. The 6mm device carries a top-mounted potentiometer for fine-tuning delay time without removing unit from DIN-rail. On-Delay mode can prevent simultaneous excess inrush currents by delaying machine startup. Off-Delay mode can enable auxiliary components, e.g., fans, to continue operation after machine shutdown.

WAGO http://ept.hotims.com/34487-100

w w w. e p t . c a

http://ept.hotims.com/34487-18

17

18

electronic products and technology • november-december 2011

Data Acquisition & Sensors Handheld accelerometer, tachometer simulates signal output Endevco model 4830A handheld, lightweight battery-operated electronic instrument simulates a variety of transducer outputs and provides a convenient and portable means of verifying instrumentation settings and cable integrity. Available output signals include single-ended and differential charge (pC), single-ended voltage (mV) and current-sinking ISOTRON (IEPE). The further inclusion of a tachometer (TTL) output signal makes the unit a convenient and portable means of on-site instrumentation testing and servicing. Simulated outputs are available in either English or Metric units over an available frequency range of 1Hz to 10KHz, with an adjustable output amplitude of up to 10,000 pC or mV pk and with overall noise of <2 mV or 2 pC rms.

Trust/EP&T7x10 4/30/07 4:54 PM Page 1 MEGGITT SENSING SYSTEMS http://ept.hotims.com/34487-45

Solution enables continuous capture of signals up to 100MHz bandwidth Streaming capability for the M9392A PXI vector signal analyzer and M9202A digitizer provides high bandwidth, PXIbased, continuous data capture (up to 100MHz bandwidth) for the RAID storage solution. Data streaming over long durations enables user to capture, detect and analyze signals of interest from their measurement environment. Product allows customers to use the Agilent 89600B vector signal analysis software to characterize complex, time-varying signals or a customer-developed data analysis tool. Specifically designed for continuous, gapless data capture of wideband signals for post-capture analysis, the M9392A and M9202A streaming capabilities are ideal for customers requiring up to 100 MHz of measurement bandwidth for frequencies up to 26.5 GHz. AGILENT TECHNOLOGIES responsiveness http://ept.hotims.com/34487-46

reliability control ownership

What does it take to distribute confidence?

endurance listening access innovation speed

trust initiative performance respect discipline competition value depth Industry-leading companies like Honeywell Sensing & Control put their trust in us. So can you.

clout agility

Non-contact laser sensor delivers highprecision performance L-GAGE LH Series laser sensor is a noncontact measurement sensor that provides accurate and stable measurements.

Product Series is used for precision displacement and thickness measurements, developed to solve demanding measurement and quality control inspections on materials. Providing high-precision capabilities, the robust, self-contained laser displacement sensor features a 1024 pixel CMOS linear imager that can achieve up to a 1 micron resolution under nominal conditions.

BANNER ENGINEERING http://ept.hotims.com/34487-47

Data acquisition platform maximizes performance Models cDAQ-9191, cDAQ-9181 and cDAQ-9171 1-slot NI CompactDAQ chassis supports wireless, USB and Ethernet buses, providing the portability of a data logger with the performance and flexibility of modular measurements. Products support all of firm’s C Series modules for the NI CompactDAQ platform and can be used in conjunction with the existing 4- and 8-slot chassis. With modules designed for almost any sensor, the product family eliminates the fixed functionality of traditional sensor measurement systems and gives engineers and scientists the ability to increase productivity while decreasing overall cost.

NATIONAL INSTRUMENTS http://ept.hotims.com/34487-48

Honeywell S&C needed a distributor partner they could trust to support their sensor, control and switch product lines. They chose us for our innovative approach to customer service, especially the way we support critical turn-around times and design requirements. So, whether you need quality switches for precise or high volume applications, sensors for critical environments or control products for demanding applications, we can meet your needs. We are your preferred source for Honeywell S&C and more.

Contact your local service center or Sager sales representative at 1.800.SAGER.800 or visit us at www.sager.com.

Sager. Distributing Confidence.®

© © 2011 2006 Sager Sager Electronics Electronics 19 Middleborough, MA 02346-1404 19 Leona Leona Drive, Drive, Middleborough,

http://ept.hotims.com/34487-19

execution service

USB/Ethernet current data logger measures power consumption PicoLog CM3 a USB and Ethernet networked current data logger is compact, easy-to-use and measures the power consumption of any line-connected equipment, building supplies, and machinery. CM3’s three channels allow it to monitor current in singlephase or 3-phase ac installations. Product’s measuring range is 0 to 200 A, with an accuracy of +/-1% and less than 10 mA of noise. Conversion resolution is 24 bits.

The current clamps comply with IEC1010-1 (1995), and with EN61010-1 (2001) at Cat. II 600 V, Cat. III 300 V. SAELIG http://ept.hotims.com/34487-49

full online product listings at ept.hotims.com

19

electronic products and technology • november-december 2011

products on review

Compact, monopole antenna is tamper-resistant WRT-MON Series monopole antenna is compact and tamper-resistant. Device requires less space inside the product and a proximity ground plane. Device installs through a small hole on the product and is anchored by a threaded metal base connected to the coax cable shield. Device is available in 2.4GHz. Product is attached to an 8.5in long coax cable with an RP-SMA, SMA or U.FL/MHF-compatible connector on the other end.

The RP-SMA and SMA connectors use an RG-174 coax. The U.FL/MHF connector uses a 1.32mm micro-coax.

ANTENNA FACTOR

2 012

http://ept.hotims.com/34487-105

Surge protection family is DIN rail mountable SPD Series surge protection family is DIN-rail mountable, with local and remote self-monitoring. Product range includes seven SPD models, with accessories, for low voltage distribution and protection of industrial control systems, equipment, assemblies and devices. Model SPD II provides a wide power range, UL 1449 Edition 3 approved to protect ac single and multi-phase distribution circuits with nominal voltages up to 480V, and safely discharge impulse surges up to 40kA to ground. Model SPD II compact modular construction uses only 18mm of rail width per phase, and allows quick and easy arrestor replacement.

WEIDMULLER http://ept.hotims.com/34487-106

Open pin field interconnect meets high-speed, high density demands SEARAY Open Pin Field Interconnect line supports the demands of high speed applications requiring highly reliable, high pin count solutions. The latest additions product family is a Right Angle design suitable for perpendicular and high speed micro backplane applications and a Press-Fit design that combines the flexibility and convenience of press-fit tails with superior signal integrity and mechanical performance. Both designs use a 1,27mm x 1,27mm grid array to achieve maximum grounding and routing flexibility.

SAMTEC http://ept.hotims.com/34487-107

Hall Effect sensors double supply voltage

Power relay functions in one space-saving unit

Premo SY series Hall Effect sensors provides a double supply voltage of ±12 to ±18Vdc. Device is a closed loop technology component in a very small package for THT mounting.

Primary winding is already integrated, which allows to measure dc, ac and pulse currents on printed circuit boards. Key characteristic of this series is the fully impregnated with a high isolation voltage: 3kV. This series has been designed for nominal currents of 5, 10, 15, 20, 25 and 50Amps.

DB LECTRO

SMART Power Relay E-1048-S6xx provides reliable switching, protecting and monitoring of PLC-controlled resistive, inductive or lamp loads in dc 24V systems.

The plug-in device offers comprehensive performance to protect against overload, short-circuit and wire break that can result in costly damages and long downtimes.

Product delivers protective monitoring and diagnostic functions, providing wear-free operation, permanent monitoring of the load circuit in case of wire break and provides reliable protection against short and overload of loads and load lines.

E-T-A CIRCUIT BREAKERS

http://ept.hotims.com/34487-108

http://ept.hotims.com/34487-109

Precision component etching of materials used in medical implants Photochemical machining process produces intricate components from specialty materials used in medical implants and implantable devices. Nitinol is used for stents and surgical fixation applications. Because Titanium is inert and completely biocompatible, it is used in maxillofacial and craniofacial reconstruction plates, as well as anode and cathode battery current collectors and telemetry antennas found in implanted medical devices. Elgiloy is employed for stiffener bands in high fatigue applications. Because Tungsten is extremely dense, 71% heavier than lead, it is used for grids to collimate and attenuate stray x-rays in CT scanners, as well as ID tags for implanted medical devices. Polyimide is etched to produce haptics for intraocular lens implants in cataract surgery and other corrective implants. Tech-Etch also manufactures custom flexible printed circuits found in implanted cardio defibrillators, pacemakers and neurostimulation devices.

TECH-ETCH http://ept.hotims.com/34487-110

w w w. e p t . c a

C O R P O R AT E OVERVIEW • AVNET EM • DIGI-KEY • MOUSER ELECTRONICS • NEWARK/element14 • ODU USA • PHOENIX CONTACT • PIONEER MAGNETICS • WEIDMULLER

PROFILES OF LEADING ELECTRONIC SUPPLIERS FOLLOWS 2012 CALENDAR

8

1

MON

JANUARY

2

TUES

9

3

WED

10

4

THURS

11

5

FRI

12

6

SAT

13

7 14

International CES • Las Vegas, Nevada www.cesweb.org

15

16

17

MARCH/APRIL

18

19

20

21

EP&T Editorial

Closing

22

23

24

29

30

31

25

26

27

APRIL

SUN 1 MON 2 TUES 3 WED 4 THURS 5 FRI 8

9

10

11

12

16 JUNE/JULY

Closing

22

23

7 14

2012 NAB Show: Apr 14-19 • Las Vegas Convention Center www.nabshow.com

17

18

19

20

EPTECH • Montreal www.ept.ca

EPTECH • Toronto www.ept.ca

EP&T Editorial

6 SAT 13

EPTECH • Winnipeg www.ept.ca

15

28

24

25

21

4G World: Apr 19-21 • China http://www.4gworld.com

26

27

28

JUNE/JULY

EP&T Ad

Closing

29

SUN

1

30

MON

2

TUES

JULY

3

WED

4

THURS

5

FRI

6

SAT

7

SEPTEMBER

EP&T Editorial

Closing

8

9

10

11

12

13

14

SEMICON West • Moscone Center, San Francisco, CA http://semiconwest.org

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

SUN

30

31

OCTOBER

MON 1 TUES 2 WED 3 THURS 4 FRI

5 SAT

NOV/DEC

6

EP&T Ad

Closing

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21 28

22 29

23 EPTECH • Quebec City www.ept.ca

30

24 31

25 EPTECH • Ottawa www.ept.ca

26

27

SUN

electronic products and technology

SUN

MON

FEBRUARY TUES

WED 1 THURS 2 FRI

3 SAT

MARCH/APRIL

4

EP&T Ad

Closing

5

6

7

8

9

10

11

17

18

24

25

APEC 2012 • Orlando, Florida http://www.apec-conf.org

12

13

14

15

16

MD&M • Anaheim Convention Centre MDMwest.com

19

20

21

22

23

26

27

28

29

MAY

SUN MON 6

APEX Expo: Feb 28-March 1 • San Diego Convention Center http://www.ipcapexexpo.org

TUES 1 WED 2 THURS 3 FRI 7

8

9

10

4 SAT

5

11

12

17

18

19

25

26

EDS Show • The Cosmopolitan Las Vegas http://www.edsc.org/

13

14

20 27

SUN

15

16

21

22

23

24

28

29

30

31

MON

EPTECH • Winnipeg www.ept.ca

EPTECH • Saskatoon www.ept.ca

AUGUST

TUES

WED 1 THURS 2 FRI

3 SAT

4

SEPTEMBER

EP&T Ad

Closing

5

6

7

8

9

10

11

NI Week , National Instruments • Austin Convention Center, Austin, TX http://www.ni.com/niweek

12 19

13

14

15

16

17

18

20

21

22

23

24

25

28

29

30

31

OCTOBER

EP&T Editorial

Closing

26

27

OCTOBER

EP&T Ad

Closing

SUN

MON

4

11

NOVEMBER TUES

WED

THURS 1 FRI

6

7

8

9

10

12

13

14

15

16

17

Electronica • MUNICH, Germany www.electronica.de

EP&T Editorial

Closing

19

20

21

22

23 ELECTROSOURCE

2013 Ad

Closing

25

3

5

JAN/FEB 2013

18

2 SAT

26

27

28

29

30

24

electronic products and technology

SUN

MON MAY

MARCH WED

TUES

THURS 1 FRI

2 SAT

3

EP&T Editorial

Closing

4

5 MAY

6

7

8

EPTECH • Calgary www.ept.ca

EP&T Editorial

Closing

9

10

EPTECH • Edmonton www.ept.ca

11

12

13

14

15

16

17

18

19

20

21

22

23

24

MAY

EP&T Ad

Closing

25

SUN

26

MON

AUGUST

27

28

29

30

ESC Silicon Valley • McEnery Convention Center, San Jose http://esc.eetimes.com

TUES

®

JUNE WED

31

C

M

THURS FRI

1 SAT

2

EP&T Editorial

Closing

3

Y

CM

MY

4

5

6

7

8

9

AUGUST

EP&T Editorial

CY

CMY

K

Closing

10

®

WHEN PERFORMANCE MATTERS MOST ™

11

12

13

14

15

16

22

23

Market Leading Partner - Market Leading Brands

1.800.56.SONIC

19th Annual Electronics Industry Golf Tournament

17

18

19

20

21

EPTECH • Vancouver www.ept.ca

24

SUN

25

MON

26

AUGUST

EP&T Ad

27

Closing

28

29

SEPTEMBER TUES

WED

THURS FRI

SAT

30

1 (formally Ferraz Shawmut)

2 9

3

10

4 11

5 12

6

7

13

14

8 15

800.567.6642 www.e-sonic.com http://ept.hotims.com/34487-20

16

17

18

19

25

26

2012

20

21

22

27

28

29

NOV/DEC

EP&T Editorial

Closing

23 30

SUN

24

MON

EPTECH • Mississauga www.ept.ca

DECEMBER TUES

WED

THURS FRI

SAT

1

www.ept.ca updates you on...

2

3

4

5

6

7

JAN/FEB 2013

8

EP&T Ad

Closing

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

• Daily new product introductions and news articles • Current and archived editions of EP&T • Registration for the regional EPTECH show in your area 80 Valleybrook Drive Toronto, On M3B 2S9 Tel: 416.442.5600 • Fax: 416.510.5133 info@ept.ca • www.ept.ca

Canada's Leading Electronics Magazine

Today’s OEM, EMS and embedded systems customers are more challenged than ever before to remain competitive in an increasingly global, complex and unpredictable electronics market. While there are few absolutes in our industry, one thing is for sure: the proliferation of electronics is here to stay.

That means more opportunities and more challenges ahead. Fortunately, you don’t have to go it alone.

Authorized distribution, at the center of the electronics supply chain, offering offers a growing array of services aimed at meeting customer needs from product design through delivery.

So, which partner is right for you? With Avnet Electronics Marketing, you don’t have to choose between the customer service excellence of a local distributor and the extensive product offerings of a global player, nor do you have to forgo technical expertise for supply chain savvy - we do it all. Our balanced supply and design chain solutions approach is driven by one clear objective: accelerating our partners’ success. From our broad array of semiconductor, interconnect, passive, electromechanical and specialty components, to inventory management, embedded solutions, e-commerce capabilities, design support and financial and logistics services, Avnet is the consummate one-stop shop.

Technology Powerhouse

Design Chain Expertise

Supply Chain Reach

That’s why Avnet is the distributor of

Our commitment to serving the engineering

As one of the world’s largest distributors,

choice for customers worldwide. As a

and technical needs of our OEM customers

Avnet Electronics Marketing’s innovative

distributor and trusted advisor, Avnet’s

and semiconductor partners is further

supply chain management solutions, world-

job is to bring the right suppliers and

evidenced by our ongoing investments in

class logistics support and lean inventory

technologies together to help customers

support of customers’ in-house engineering

management capabilities give our customers

accelerate their solutions - employing

teams. Our engineer-to-account-manager

greater command and control over their

not only today’s hottest technologies,

ratio of 2.5-to-1 gives customers access

global supply chains. Our expert market

but tomorrow’s as well. Avnet’s strategic

to distribution’s best technical expertise to

intelligence and communications capabilities

partnerships and dedicated technical

help complete designs quickly. Our design

provide visibility into global demand and

resources are lowering the barrier to

engineers are highly trained EEs who average

supply helping to mitigate the disruption

entry and paving the way for customers

nearly two decades of design experience.

from demand fluctuations. So, the inevitable

and suppliers to penetrate new markets

And, Avnet engineers don’t just talk the talk.

swings from boom to bust and back again

and adopt emerging technologies, such

Avnet engineers are innovators and experts

don’t have to jeopardize your business or

as high-brightness LEDs, renewable

in their own right - with more than 40 patents

your bottom line.

energy and smart power technology.

in their names. Consider them your very own high-tech secret weapon.

Contact us today to learn how the right distribution partner can give you the competitive edge you need to succeed in today’s electronics market.

1 800 332 8638 www.avnetexpress.com Follow us on Twitter!

©Avnet, Inc. 2011. All rights reserved. AVNET is a registered trademark of Avnet, Inc.

www.twitter.com/avnetdesignwire

http://ept.hotims.com/34487-21

Accelerating the Speed of Design. ™

Accelerating the Speed of Design. ™

Your one solution for design creation.

Avnet Memec focuses on a select group of leading suppliers to provide original equipment manufacturers (OEMs) a high level of technical expertise — enabling the swift and accurate design of leading-edge products.

Your one solution for design creation.

With factory trained and certified support, Avnet Memec specialists offer a level of technical depth unmatched in the industry. easy access to our suppliers industry experts, your projects move forward Avnet Memec focuses on aWith select group of leading to provide original equipment with greater velocity, driven by in-depth technical expertise.

That translates into faster time to manufacturers (OEMs) a high level of technical expertise — enabling the swift and accurate ™ Avnet is ranked market for you, with greater ease and confidence.

From Design to Delivery. design of leading-edge products.

Best-in-Class* for online seminars, design and engineering services and knowledgeable

application engineers – proof that we consistently deliver: With factory trained and certified support, Avnet Memec specialists offer a level of technical depth unmatched in the industry. With easy access to our industry experts, your projects move forward > Proactive engineering support with greater velocity, driven by in-depth technical expertise. That translates into faster time to > Factory certified FAEs ease and confidence. From Design to Delivery.™ Avnet is ranked market for you, with greater Best-in-Class* for online seminars, design and engineering services and knowledgeable

™ Accelerate Time to Market. application engineers – proof that we consistently deliver: Visit the Avnet Design Resource Center™ at: www.em.avnet.com/drc > Proactive engineering support > Factory certified FAEs

Accelerate Time to Market.™ Visit the Avnet Design Resource Center™ at: www.em.avnet.com/drc

1 800 332 8638 www.avnetexpress.com *As ratedInc.

by Hearst Electronics Group:AVNET The Engineer & Supplier Interface ©Avnet, 2011. All rights reserved. is a registered trademark ofStudy, Avnet,2009.

Inc. ©Avnet, Inc. 2010. All rights reserved. AVNET is a registered trademark of Avnet, Inc.

1 800 332 8638 www.avnetexpress.com Follow us on Twitter!

www.twitter.com/avnetdesignwire ©Avnet, Inc. 2011. All rights reserved. AVNET is a registered trademark of Avnet, Inc.

http://ept.hotims.com/34487-22

00

Accessibility has also been enhanced with the Digi-Key Mobile Application for iPhone and Android devices. This app provides easy access to Digi-Key’s expansive product offering and resources. One can create Digi-Key orders and view them in local, DigiKey supported currencies. Utilizing this app will allow customers to source the electronic components they need, wherever they are at the time.

In the 2011 Distributor Customer Evaluation Study conducted by UBM Electronics in partnership with Beacon Technology, engineers and industry professionals found Digi-Key to be the top distributor in the world by ranking Digi-Key #1 in categories such as:

Photo 1

• Overall Most Preferred Distributor

DIGI-KEY CORPORATION COMPANY PROFILE

• Breadth of Product • Product Availability • On-Time Delivery • Ease of Doing Business A demonstration of customer appreciation for Digikey.com was also depicted in the UBM study as Digi-Key’s online presence enjoys the highest ratings across the following evaluation criteria:

It all began with an idea. In 1972, Electrical engineer Dr. Ron Stordahl had a vision of making quality electronic components accessible to everyone, from engineers to hobbyists.

Thirty-nine years removed from the trunk of Dr. Stordahl’s car, Digi-Key has grown into a billion-dollar company, internationally known for providing the industry’s broadest selection of electronic components for off-the-shelf delivery to a global customer base from a single, 65,000 square-metre distribution facility in Thief River Falls, Minn., U.S.A. (Photo 1)

• Most Visited Site

Customer service is at the forefront of the Digi-Key business plan. Digi-Key has always been committed to providing the best service possible, and this is evidenced by their international reputation for providing top quality products and services to customers around the world. This customer-centric mentality has allowed Digi-Key to experience exponential growth over the past few years, topping $1.5 billion in sales for 2010, despite less than ideal economic conditions. Specifically, year-to-date sales in Canada have seen a significant increase, up nearly 12 percent over 2010 sales through three quarters. Digi-Key has ridden this unparalleled growth to become the world’s sixth largest global electronic component distributor, and is ranked fourth for distributors in North America.

• Ease of Ordering Product Online.

“Broad selection of electronic components” is quickly becoming an understatement as Digi-Key continues to grow. Digi-Key currently offers over 1.7 million parts from 470 world-class manufacturers by way of its award-winning website, www.digikey.ca.

Digi-Key’s products are available worldwide in 81 different country-specific websites, 14 currencies, and eight languages. More than 500,000 of these components are stocked on-site and available for immediate delivery, and the vast majority of these components are shipped the same day. After being entered into the Digi-Key system by a sales representative, most orders are picked, packaged, and ready for pickup by any of the major freight carriers with which Digi-Key contracts within minutes. Worldwide carriers include UPS, FedEx, and DHL. Digi-Key’s North American customers enjoy next-day delivery, as orders are shipped directly from Digi-Key and routed to their destinations throughout Canada, Mexico, and the US. (Photo 2)

“Digi-Key’s unique business model allows us to aggregate component usage to better serve our customers in Canada, the United States and around the world,” said Tony Harris, Chief Marketing Officer, Digi-Key Corporation.

“Our commitment to providing the world’s largest selection of electronic components both in-stock and online equals increased sales for Digi-Key and more opportunities for proving our worth to our customers.”

In an effort to reduce environmental impact while improving product accessibility, Digi-Key recently made the decision to cease production of the print catalogue in favor of an interactive, online version. Customers now have access to every product offered by Digi-Key, as soon as it is available. Parts and stock are updated in real-time, along with associated parts, related product, datasheets and more to provide as much information for the customer as possible.

The service does not stop after the sale, however. DigiKey offers a myriad of support options, from phone-in customer service and live, online technical support, to Product Training Modules and supplier datasheets.

Technical experts are available 24 hours a day to answer questions and help find solutions for any technical dilemmas which may arise.

Some of the latest globally accessible resources on Digi-Key’s website are the TechZoneSM technology zones which house informative articles, white papers, and application notes based on Energy Harvesting, Lighting, Microcontroller, Power, Sensor, and Wireless technologies. Digi-Key has developed these technologyspecific resources so that users of almost any profession within in the electronics industry can learn more about the latest technologies by gaining access to content penned by supplier representatives and the expertise of members of the engineering community.

TechZones also include consistently updated information regarding new products available through Digi-Key’s online catalogue.

Digi-Key is committed to keeping customers informed on the newest happenings within the company. Social media has become a great tool for providing this access and keeping customers involved. Digi-Key utilizes all of the most popular social media outlets, including YouTube, Twitter, Facebook, and LinkedIn. These tools allow the public to stay informed of new product offerings, company news, and any other pertinent information which may be valuable.

Photo 2

http://ept.hotims.com/34487-23

• Organization of Site • Accurate Search Engine • Ease of Navigation • Value of Online Content

Photo 3

Whether one or one thousand parts, Digi-Key has the components you need, when you need them.

The tradition of providing the best service possible to its customers has always, and will always be at the forefront of the Digi-Key business model. As the world continues to change at an ever-increasing rate, Digi-Key will continue to innovate and grow, while never losing that spirit of individual service which has served its customers well for nearly four decades and will keep doing so as we delve into the unknown future. (Photo 3) Photo 1: Digi-Key’s 65,000 square meter distribution centre in Thief River Falls, Minnesota, USA. Photo 2: Completed orders boxed and ready for shipment to Digi-Key’s global customers.

Photo 3: The Digi-Key sign, prominently displayed outside the building, is one of the first sights upon entering Thief River Falls.

© 2011 Digi-Key Corporation 701 Brooks Ave. South, Thief River Falls, MN 56701, USA

http://ept.hotims.com/34487-24

ouser Electronics—a subsidiary of TTI, Inc. and part of Berkshire Hathaway Inc.— is one of the industry’s fastest growing global catalog and online semiconductor and electronic component distributors.

Mouser is a company dedicated to supplying design engineers with the most rapid introduction of the newest products and leading-edge technologies combined with unsurpassed customer service and worldwide support from 19 global locations. Focused on design engineers and buyers demanding small to medium quantities of the latest products, Mouser’s customer-focused distribution delivers tomorrow’s technology today.

mouser.com The Newest Products for Your Newest Designs

®

Same-Day S am me--Dayy Sh Shipping hippin ng Not Just What’s New, What’s Next Mouser is a company that’s passionate about having the latest components available as soon as possible.

The company delivers a time-to-market advantage to customers with its website and multiple print catalogs, featuring the newest products and technologies.

Continuous updates are made to ensure the newest products are added and end-of-life products are removed, providing customers with easy access to the newest products and technologies. Mouser denes it as not What’s New, but What’s Next.

Mouser’s worldwide headquarters is based in Texas, USA, and totals over 150,000 m2, encompassing ofces, call and data centers, as well as its state-of-the-art warehouse. The wireless warehouse management system is streamlined to nearly perfect pickand-ship operations. These high-tech capabilities and the efcient order fulllment processes allow for fast delivery with same-day shipping on most orders received by 8 p.m. CST.

eCommerce Made Quick and Easy

Worldwide W orrldw wid de C Customer usttom mer Ser Service rvice

Mouser.com is updated daily with products from more than 450 industry-leading manufacturers represented online. The website searches over 8 million products to locate more than 2 million parts numbers that are available for easy online purchase. Also, you’ll nd in excess of 6 million downloadable data sheets, supplierspecic reference designs, application notes, technical design information and engineering tools. It even offers 17 language choices and accepts 16 international currencies. The site is constantly rened – adding new products daily, removing obsolete products, plus featuring numerous user-friendly tools, such as Project Manager with automatic re-order, BOM import capabilities, automatic order conrmation, Mouser search accelerator and other time-saving functions.

Mouser is dedicated to providing superior service and support to customers worldwide. In addition to the United States locations, Mouser has customer service centers around the world, including Mexico, Germany, Czech Republic, France, Israel, Italy, the Netherlands, Spain, Sweden, and the UK as well as Asia (Hong Kong, Shanghai, Singapore, India, Taiwan, and Thailand). Mouser believes in providing the best customer service – regardless of the size of the customer or the size of the order. Breaking packs and no minimum orders, including onepiece shipping, are especially attractive to engineers working in the earliest stages of the engineering design cycle.

In addition, the company supports numerous languages and accepts all major international currencies. Mouser is a company that rmly believes quality service and support should transcend all boundaries.

Broad Product Line and Expansive Catalog Mouser Electronics is your one source for all board-level components and associated development tools utilized for total project design. The company’s broad-based linecard consists of components across the board from more than 450 industry-leading manufacturers of semiconductors, optoelectronics, embedded modules, as well as passives, interconnects, electromechanical, circuit protection devices, enclosures, thermal management, and wire/cable products.

Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. The Newest Products for Your Newest Designs is a registered trademark of Mouser Electronics, Inc.

AS9120A Authorized Distributor

Find It Here. Faster.

™

The Newest Products for Your Newest Designs®

Scan Here to Watch Video

Authorized distributor for the most advanced semiconductors and electronic components.

Get What’s Next. Right now at mouser.com.

Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc.

00

Newark/element14 Corporate Overview

the element14 knode Engineering design information to a web-connected world Electronic system design requires engineers to gather information for many different technologies from many different places. So where is the best place for an engineer to find all this information?

That is the question that Newark/element14 set out to answer when it commissioned a study by Technology Forecasters Inc. (TFI) focused on the key challenges faced by design engineers in improving electronic system design efficiency. The results of this study, released in September 2011 show an opportunity for an independent, web-based source of technology solutions and design information to address the needs of design engineers.

The scope of the TFI study covers the external information gathering needs for design engineers throughout the entire design process, from initial specification and technology research, through detailed design, prototype testing and evaluation, and finally to engineering release and production.

The study surveyed engineers across the globe in big and small companies, and asked them where they spent their time searching for information, which information was the hardest to find, and about their perceptions concerning the value and quality of the information they found at those sources. The study was conducted both through written surveys and through many phone conversations with engineers around the world.

Not surprisingly, the study found that most of the time spent searching for external technology information was spent during the early stages of the design process. This makes sense, as it is during the initial conceptual design, and detailed implementation stages that engineers are most likely to need external technical information. In these initial stages of the design process, the designer is often left to single-handedly gather information from a variety of sources. Ideally, the experienced engineer will have a set of “go-to” places to search for information – and indeed the survey found that seasoned engineers were somewhat less likely to encounter difficulties and delays in this information gathering phase.

Yet, even the experienced designers spent unproductive weeks during this process – exposing a big opportunity for improvement to the design process.

In a typical design process, the electronic design engineer begins by researching the technology; including gathering information about design protocols and standards, learning about existing architectures, and discussing possible new approaches with experts in the field.

In today’s world, the starting point for this search is usually a general purpose search engine like Google. Unfortunately, while a Google search will return thousands of items on a term like ‘Zigbee,’ it will probably add days to the engineer’s workload to sift through the results to find the relevant technical data. Further, engineering research also requires digging through dozens of vendor web sites to search for the latest product information, each with different structures and data formats.

The element14 knode provides an engineering-focused search tool that helps speed up and simplify electronic engineering design research by consolidating relevant technical information into a single learning center and combining it with technology forums for connecting semiconductor supplier experts and engineers with similar design interests.

The next step in the design phase may include testing potential technologies for their performance and suitability to the application. For hardware analysis, an engineer can use a development platform as an “instant prototype” of a portion of the design. A single resource for all development kits, arranged by application type and by supplier, can help accelerate the design process by defining the right parts for the system.

Similarly, system software can be prototyped using off-the-shelf software elements for specific applications. Engineers download trials for real-time operating systems and software stacks to evaluate different implementation options. By finding compatible application software and hardware solutions together in one location, engineers can devote more time to adding differentiating features to their systems rather than debugging interfaces between vendor products.

The system development process also benefits from the consolidation of design tool information and expertise into a single location. The process through which engineers look for design tools can require lengthy evaluation cycles and designers are often forced Source: Technology Forecasters to develop benchmarks for testing different types of tools before interpreting the results.

The hardware development process requires many tools; including pcb tools for schematic design and layout, FPGA synthesis tools, or analog simulation and analysis tools.

On the software side there are also many different IDEs, compilers and debuggers, all with unique features and benefits depending on the choice of microprocessor in the system. The development tool decision process can be accelerated through the availability of an extensive library of pre-created benchmarks and demos. Further, access to the combined experiences of a community of engineers that have already used the tools can also inform the decision so that the acquisition process does not impede design development.

The main issue facing engineers is simply not having enough time. Everyone can relate to being busy, and engineers doing electronic design are especially pressured to meet aggressive product design schedules. Pulling together information from multiple sites adds to this time

pressure, as engineers scour the web for component data, app notes, design models, development tools and standards specifications, to name just a fraction of the technical informaSource: Technology Forecasters tion required for each new design project.

Furthermore, most of the design data required for design analysis is in disparate formats, making objective information comparisons difficult.

As with many webbased searches, the design engineer is certain to find that some of the information is incomplete or inaccurate, potentially based on old specifications Source: Technology Forecasters or from sources that haven’t kept the information current – and in some cases from sources that no longer exist. The results of the study show that engineers could save significant time in their design process through the availability of accurate and easily comparable design data.

But specifically what content should be provided on a centralized hub of technology solutions? The study found the design information that engineer’s value most highly is app notes and technical papers. Simulation models also rank highly, which underscores how difficult it can be to get accurate models for the design flow. But the most highly prized data solution is clearly the reference design. This reflects the need for a valid starting point for design that implements basic functions for a specific protocol and avoids “reinventing the wheel” – saving time and allowing design engineers to focus their time on components that are unique to their particular system.

While basic component information is generally easy to find on vendor and distributor web sites, there are some data points that are harder to come by. For instance, pricing and availability might be found on a distributor site, but unbiased product reliability data, or long-term end-of-life information about a component may be more difficult to find. In fact, the bias of a vendor web site, along with the skewing of product specification data is one of the biggest concerns facing engineers making component purchasing decisions.

In some cases, the component datasheet may show best-case specification numbers for every design constraint (e.g. power, voltage, current), making the component described by that datasheet a device that could never exist in the real world. Other suppliers may show only the most pessimistic numbers for the same device, making valid comparisons almost impossible without doing weeks of laboratory testing. A single, unbiased source of comparison data can help replace the ubiquitous spreadsheets that engineers produce for every new project.

Finally, the study explored the many sources where engineers find their design data and compared the advantages of the addition of an independent source as a place to start design research. While most design searches begin with Google as a neutral starting point, the huge volume of information returned is problematic, as is the possibility of the right data being hidden behind thousands of irrelevant search results.

Vendor sites by contrast, yield accurate component data, but TFI’s survey revealed concern regarding vendor bias in any comparison data. New social media sites such as forums, communities and blogs are another possible source of data, however engineers have concerns over unknown levels of expertise or bias in anonymous posts. The strategy for element14 is to provide a new credible alternative for engineers as an independent source of engineering design information and solutions.

The results of this study highlight the opportunities to advance the design process and design engineer’s overall productivity via a web-based design knowledge-base that gives engineers consolidated design resources, increased collaboration with peers working on similar stages of the product design lifecycle, and access to reliable search sources.

The complete design study is available at element14.com/designstudy http://ept.hotims.com/34487-25

MORE NEW TECHNOLOGY PRODUCTS ADDED DAILY. AND SHIPPED THE SAME DAY.

We are thrilled to announce the coming together of element14 and Newark into one powerful entityâ&#x20AC;&#x201D;the all-new element14.

We will continue to provide the great products and personal service weâ&#x20AC;&#x2122;re known for, plus a significant new product expansion, and much more. The vision is a single destination that offers an unprecedented range of technical data, innovative tools and services, meaningful community and expert engagement, and the best component shopping experience ever.

Learn more about our combined vision at www.newark.ca/together

http://ept.hotims.com/34487-26

http://ept.hotims.com/34487-27

http://ept.hotims.com/34487-28

00

Phoenix Contact’s New Canadian Headquarters:

New Products:

New Canadian HQ Phoenix Contact has moved their Canadian Headquarters to Milton, Ontario. Phoenix Contact’s current remarkable growth made the move into the new 25,000 sq ft facility necessary and houses sales, marketing, customer care, logistics, IT and accounting. An expanded value added solutions centre, an automation lab, exposition area and increased training capacity increases Phoenix Contact’s customer services.

PTPM and PTSM

Push-In Technology

Two new mini plug connectors reduce connection time and allow for true surface-mount processing. The PTPM and PTSM, designed for use in LED connections, measure just 5 mm high and are rated up to 5 A.

The new push-in experience with Push-In Technology is the latest generation of modular terminal blocks in the CLIPLINE complete system.

The new PTPM uses insulation-piercing connection (IPC) technology, eliminating wire preparation. This allows on-site connection without tools for both signal and data on a 2.5 mm centerline. To connect, the user simply inserts the conductor into the housing and presses the housing down with the thumb. There is no need to strip conductors.

• • • •

Save valuable labour with tooless connections Up to 50% lower insertion forces required Release button is quick and easy with no special tools required Completely touch-proof

Phoenix Contact is further investing into the Canadian market with the Technology Centre in Montreal (opened in 2010) and a planned Western Canadian Technology Centre and expanding its engineering application and support staff.

Phoenix Contact, founded over 80 years ago, is a leading manufacturer of electric connection and industrial automation technology. 11,000 employees, 47 own sales companies and 30 sales partner worldwide ensure customer proximity.

QUINT ORING

MOSFET Redundancy Module with ACB Technology® Features: • • • •

MOSFET based redundancy, drastically reduces power loss compared to traditional diode blocks Automatically balances the load share of the power supply units, maintaining an even current draw at all times Monitors the electrical connections between the power supplies, QUINT ORING and the load Full decoupling functionality ACB technology doubles the service life of your redundant power supply units.

PHOENIX CONTACT Ltd. 8240 Parkhill Drive Milton ON L9T 5V7 Toll Free: 800.890.2820 Phone: 905.864.8700 Fax: 905.864.7900 www.phoenixcontact.ca http://ept.hotims.com/34487-29

Do More With Less!

17 pins in M12

More Signals, Less Space!

M12 is the leading connector style in the sensor/actuator field and is fast becoming the dominant connector for device manufacturers. the highdensity M12 series includes shielded or unshielded sensor/actuator cables, flush-type connectors with solder connection or with PieRCeCon connection.

Key Benefits include: 90% faster connection Space savings Rated for iP65/iP68/iP69K For additional information please contact: toll Free: (800) 890-2820 or visit: www.phoenixcontact.ca http://ept.hotims.com/34487-30

© Phoenix ContaCt 2011

http://ept.hotims.com/34487-31

http://ept.hotims.com/34487-32

5. CustOM COOLing COnfiguratiOn • MOst ELECtriCaL sPECifiCatiOns saME as OtHEr PrOduCts.

4. 20 kw’s tO > 30 kw’s, 2u X 19" witH ManifOLd

3. 8.1 kw’s, raCk MOuntabLE uP tO 24 kw’s in 19" POwEr sHELf

2. PiCturE dEPiCts 2u X 19" PrOduCt - tyPiCaL PiPE COnfiguratiOn:

1. 20 kw’s tO > 30 kw’s • 2u X 19” raCk MOuntabLE, HOt PLug OPtiOn: Rack mountable • 365 VAC to 528 VAC • 3P Input • Pluggable option • 99% Power Factor Corrected 92% efficiency at 80% load • Standard liquid inlet temperature is 35° C. • 60° C. is available Ambient temperature at 0° C. to + 50° C. • Special options for smoothing pulse loads • Up to 1700 Amps/system > 89% efficient at 6 Volts • Water Flow 2 GPM • Low Harmonics • Intelligence • Complies with IEC 555 6 VDC to 400 VDC output voltage

PowerChamp Products

1

Call the Power guys: Param or Clayton: toll free: (800) 269-6426 (310) 829-6751 fax: (310) 453-3929 email: sales@PioneerMagnetics.com 1745 berkeley street santa Monica, Ca 90404, usa www.PioneerMagnetics.com

5

4

tel:

3

2

Liquid COOLEd faMiLy Of POwEr suPPLiEs

PiOnEEr MagnEtiCs

Weidmuller — Connecting with Customers Making the right connection is key to any business.

We continue to expand our

The RockStar Series heavy

At Weidmuller, we’ve made it our mission to be at

extensive signal conditioning

duty connectors provide

the forefront of connection technology. With thou-

line. The new 6mm wide

IP65/66 rated field wiring for

sands of products that range from terminal blocks

MicroAnalog isolator series,

a range of applications. New

and relays to power supplies, as well as industrial

along with our industry leading

RockStar HDC kits with met-

Ethernet and wireless products, we offer complete

WaveAnalog family, are now

ric cable entries complement

connectivity solutions.

cULus listed for use in

the existing PG types. Each

Hazardous locations. Our

kit contains a complete

WaveAnalog signal conditioners

connector assembly, with

feature current loop isolation, as

a single part number for

Our on-site services include engineering, custom rail assembly, electronic development and interface board design. Our progressive approach to changing trends and regulations within the industrial and process automation markets gives us the knowledge to develop even better solutions to meet customer needs.

well as a HART protocol version. The versatile

simplified specifying. For the

WavePro Series includes DC/DC, RTD, Thermocouple,

transportation market, the IP68 rated products feature

Bridge and Frequency converters, and is comple-

increased corrosion and impact resistance.

mented by the new Mann Series process oriented isolators, totalizers and displays, and ATEX approved ACT20X lines.

Weidmuller’s industry leading marking systems

Weidmuller is a leader in DIN-rail mounted terminal

include the new PrintJet

blocks. Our selection of screw type SAK and W-Series

Pro, the market’s first full

terminal blocks is the industry’s most comprehensive

color printer for MultiCard

line-up. The tension clamp Z-Series blocks include the

markers. A full range of

new WeiCoS line, a pluggable system designed spe-

MultiCard markers is avail-

cifically for the transportation industry.

able for terminal blocks, wire and cable, as well as other device markers for relays, signal conditioners and standard wires.

Weidmuller’s RailDesigner ® 5.0 helps simplify your terminal rail assembly process. Existing features combined with new improvements in version 5.0 provide the most comprehensive environment for custom rail design. Improvements include several data exchange enhancements, a real-time 3D representation and print option, a search and replace feature and an improved printing menu. In addition, the product database has been expanded to include hundreds of new products ranging from termiWe continue to innovate with Push-In technology. Our

nals and power supplies to relays and industrial

P-Series terminals can help reduce installation time by

The PRO-M line adds a new dimension with narrow,

as much as 50% when compared with traditional

high efficiency power supplies for factory automation

screw terminals.

and machine applications. With a slim footprint, start-

Ethernet modules.

ing at only 35mm wide, they can be mounted with no side-to-side separation. The new PRO-H Series power

Our reputation for excellence

supplies are designed for

in Printed Circuit Board (PCB) connector technology is worldwide.

Weidmuller’s LSF-SMT is the first SMT compatible PCB terminal to feature Push-In connections.

the demands of process applications and are cULus Listed, Class 1 Division 2

CONNECTION TECHNOLOGY

The PowerMate range of high current connectors

approved and ATEX approved.

offers compact size, high current ratings and integrated locking mechanisms. The SL-SMT family includes

s1 Clas . 2 DivROVED APP

We design our products to be much more than functional. At Weidmuller, our goal is to offer solutions that can

the SL-SMarT connectors that allow for the creation of

help you save cabinet space, lower

any number of poles with only 4 part numbers.

installation times, provide touch safe connections and eliminate down time.

For more information on any Weidmuller products or application assistance, email us at support@weidmuller.ca or visit our web site at www.weidmuller.ca. http://ept.hotims.com/34487-33

Flexible and Efficient DCS Marshalling–

The New WMF 2.5 Multi-Functional Block Series Saves Time and Space.

2 Blocks - Multiple Options:

Innovative Fusing

• Feed through, fuse and disconnect

• Blown fuse indication (LED) with low leakage rating (0.5mA) • Provides quick disconnect

3 Cross Connections • Three pluggable center channels • Ideal for commoning potentials

Pluggable Connections • Pre-assembled cables possible • 87% wiring time savings

Ground Shield Attachment Point • With integrated ground connection • No ground block required

Small Form Factor • Up to 55% space savings with 5mm width

Learn more about the WMF 2.5 Series online at:

www.weidmuller.ca http://ept.hotims.com/34487-34

Canada:

US:

Mexico:

info1@weidmuller.ca 1-800-268-4080

info@weidmuller.com 1-800-849-9343

clientes@weidmuller.com.mx 01 222 2686267

www.weidmuller.ca

www.weidmuller.com

www.weidmuller.com.mx

expressmart / advertisers' index

express

electronic products and technology • november-december 2011

mart

Proof at 100%

Proof at 100%

PCB Design Services

InfiniiVision X-Series Oscilloscopes In Stock. Immediate Delivery!

• Professional PCB layout and schematic capture • Quick prototyping services • Experienced design team • Dependable services

2012 The only series of coast-to-coast electronics shows in Canada

The InfiniiVision 3000 X-Series offers entry-level price points to fit your budget with superior performance and optional capabilities that are not available in any other oscilloscope in its class. Our break-through technology delivers more scope for the same budget.

New OLED DMM’s, and much more

www.gapwirelessonline.com Tel: 905.826.3781 info@gapwireless.ca http://ept.hotims.com/34487-35

COMING SOON!

Our designer is the extension of your staff.

We are your PCB design center and outsourcing partner.

Watch for more information

Boardtech Integration

155 Tycos Dr, Unit 37, Toronto ON M6B 1W6 www.boardtechintegration.com • Tel: 416.399.6297 info@boardtechintegration.com tom.l@boardtechintegration.com http://ept.hotims.com/34487-36

in upcoming issues of EP&T!

http://ept.hotims.com/34487-37

products on review

Solid state halogen transformers are dimmable Pony line of solid state, dimmable halogen electronic transformers of 60 and 75 Watt models has expanded to 150W, 300W linear and 300W circular units. The 12V 50/60Hz transformers operate multiple dimming and nondimming MR16 and MR11 lamps to stated wattage, provide short circuit/ overload/ thermal protections, operate at 50C maximum ambient temperature, and use cURus components (UL recognized components).

FULHAM http://ept.hotims.com/34487-111

Absopulse Electronics Limited . . . . . 8 Agilent Technologies Canada Inc. OBC Avnet EM(AZ) . . . . . . . . . . . . . . 22-23 Boardtech Integration . . . . . . . . . 38 Conec Corp. . . . . . . . . . . . . . . . . . . 3 Digi-Key Corp . . . . . . . . . . . . 5, 24-25 Displaytec-Canada . . . . . . . . . . . . . 17 Electro Sonic . . . . . . . . . . . . . . . . 21 ELMA Electronic Inc. . . . . . . . . . . . 14 EMX Enterprises Ltd. . . . . . . . . . . . 10 Fibox . . . . . . . . . . . . . . . . . . . . . . 16 GAP Wireless . . . . . . . . . . . . . . . . 38 Hammond Mfg. Co. . . . . . . . . . . . . IBC Irwin Industrial Agencies Limited . . . 4 Lista International Corp. . . . . . . . . 13 Mouser Electronics . . . . . . . . . . 26-27 Murata Power Solutions . . . . . . . . 10 NEWARK . . . . . . . . . . . . . . . . . . 28-29 ODU USA Inc. . . . . . . . . . . . . . . 30-31 Omega Engineering Inc. . . . . . . . . IFC Phoenix Contact Ltd. . . . . . . . . . 32-33 Pioneer Magnetics . . . . . . . . . . . 34-35 Protocase . . . . . . . . . . . . . . . . . . . 15 Radian Heatsinks . . . . . . . . . . . . . . 14 Sager Electronics . . . . . . . . . . . . . . 18 Samtec . . . . . . . . . . . . . . . . . . . . . . 7 Schurter Inc. . . . . . . . . . . . . . . . . . 11 TDK- Lambda Americas Inc. . . . . 9, 38 Tech-Etch, Inc. . . . . . . . . . . . . . . . . 6 Universe Kogaku America . . . . . . . 12 W Interconnections Canada Inc. (Weidmuller) . . . . . . . . . . . . . . . 36-37

ADVER TISERS’ INDEX

38

Miniature USB receptacle brings high-speed to OTG devices

SMD-terminal block terminates push-button

Type AJS17G micro-B style USB receptacle brings high-speed and ultra-miniaturization to OTG devices. At roughly half the size of a mini-B style USB, RIA’s AJS17G connector is a surface mount device, ideal for use in smaller downstream devices such as PDAs. Constructed with a high temperature resistant LCP insert and supplied in tape and reel, the AJS17G is perfect for high volume, reflow-solder manufacturing. The shell is nickel plated for durability and scratch resistance. Add the mating plug, AJP39G for a complete micro-B connector pair.

RIA CONNECT

2060 Series 2-pole SMDterminal block provides class-exclusive, push-button termination/re-terminations for the broadest range of solid/stranded conductors AWG 24–18.

With class-leading UL/CUL ratings of 9A/250V, device is a labor-saving alternative to soldering leads for pcb-based LED products.

Product enables correction of wiring errors during assembly of LED devices. Ratings double that of traditional designs also make 2060 ideal for compact industrial electronics.

WAGO

http://ept.hotims.com/34487-112

Pluggable pcb headers boost contact density Pluggable printed circuit board (pcb) terminal connectors provide 3.5 millimeter pitch high density, while remaining easy to work with. The angled pcb headers provide a high contact density inside a compact housing. The two-tier and three-tier headers are available in 2 to 16 pole designs per tier, in straight or angled versions, with or without latching flanges for mating connectors. Three-tier version, wiecon 8513 SDGN, provides a maximum of 48 poles for the connection of 1.5 mm² wires. Two-tier terminal blocks, wiecon 8513 SEGN, provide up to 32 poles. Wiecon 8513 BS mating plug connectors are equipped with push-in technology for quick wiring without tools.

WIELAND ELECTRIC http://ept.hotims.com/34487-113

Thin, low-ESR capacitors support peak power requirements DMD and DME series thin, low-resistance, electrical double-layer capacitors (EDLC) supercapacitors do not have traditional dielectric layers, storing charge in an electrical double layer that is formed at the solid-liquid interface. Devices provide a compact part with a high capacitance, high voltage with very low equivalent series resistance (ESR) over a wide temperature range. Products deliver higher energy storage and power density than any existing conventional capacitor technology.

MURATA ELECTRONICS http://ept.hotims.com/34487-116

http://ept.hotims.com/34487-114

High current spring pins are ruggedized Three large scale, high current spring pins join family of ruggedized springloaded products for applications where greater spacing is required due to electrical and mechanical specifications. Devices rated at 9 amps and designed with unique termination features. MM 0854-015-20-82-14-11-0 has a solder cup while MM 0855-0-15-2082-14-11-0 is designed with a crimp barrel – both can accept wire diameters up to 16AWG. MILL-MAX http://ept.hotims.com/34487-115

Dual-output, two-stage, optocoupled demo board maximizes efficiency SGDR2500P2 dual-output, two-stage, optoisolated gate driver board intended for use with power electronics modules incorporate firm’s vertical-trench junction field-effect transistors (VJFETs) as the primary switches. The board provides electrically isolated high-side and low-side outputs with peak current levels of +20/-10 A, enabling fast switching speeds and yielding record-low switching energy losses. Device is optimized for the high-speed, hard switching of specific power modules, but can also be used as a time-saving evaluation board for projects in the development or qualification stage.

Unit self-generates isolated ±15 V supply voltages, eliminating the need for multiple power supplies.

SEMISOUTH LABS http://ept.hotims.com/34487-117

http://ept.hotims.com/34487-40

http://ept.hotims.com/34487-38

http://ept.hotims.com/34487-41

http://ept.hotims.com/34487-39

http://ept.hotims.com/34487-42

http://ept.hotims.com/34487-43

From extreme value to extreme performance.

Infiniium 9000 Series • 600 MHz- 4 GHz • MSO and DSO models • 20 GSa/s sample rate • 40 Mpts memory std. (optional to 1 Gpt) • >30 protocol, compliance and analysis options

Whether you need the fastest real-time oscilloscope on earth with the highest measurement accuracy anywhere, or something a little more basic, from 20 MHz to 90 GHz Agilent oscilloscopes outperform in every category. That’s why discerning engineers have made Agilent the fastest growing oscilloscope company in the world since 1997. Like you, we’re working on what’s next.

That’s thinking ahead. That’s Agilent.

Scan code or visit http://goo.gl/NR3Xm for 9000 Series demo video

Buy the Best. Get Rewarded.

Find out how to get a complimentary 3000 X-Series scope www.agilent.com/find/ScopeReward u.s. 1-800-829-4444

© 2011 Agilent Technologies, Inc.

http://ept.hotims.com/34487-44

canada 1-877-894-4414