Electronic Products and Technology March April 2011

SWITCHES & CIRCUIT PROTECTION

electronic products and technology - MARCH-APRIL 2011 electronic products and technology

AN EP&T SPECIAL REPORT PAGE 23

POWER SUPPLIES / MEDICAL APPLICATIONS Page 10 ERICSSON POWER MODULES

ENVIRONMENTAL DESIGN / GREEN TECH Page 18

INDUSTRIAL AUTOMATION Page 26 CONEC

Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: Business Information Group, 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2 circulation@ept.ca

omega.ca

What’s New at Quoi de Neuf chez

Please Call to Receive Your FREE Dilbert CONTROLCAT New Horizons in Temperature, Pressure, Flow and More!

TM

®

or Visit Our Web Site: omega.ca/literature

Veuillez nous Contacter pour Recevoir votre Copie GRATUITE Dilbert MC CONTROLCAT New Horizons MD de Température, Pression, Débit et Plus!

ou Visitez Notre Site Internet: omega.ca/literature

FREE GRATUIT

pour les ventes et le service - composez

TOUT JUSTE SORTI DE LA PRESSE!

Plus de 150 pages couleurs de Produits à la Fine Pointe de la Technologie!

Automation and Control Calibrators: Temperature & Pressure Chart Recorders Data Acquisition Systems Data Loggers Flowmeters Heaters: Flexible, Immersion, & Strip Infrared Handheld Instruments Load Cells pH and Conductivity Instrumentation Pressure Transducers Photoelectric and Proximity Sensors RTD Probes and Thermometers Sanitary Temperature and Pressure Sensors, Transducers Signal Conditioners Strain Gages Thermocouples Terminal Blocks Transmitters USB Probes and DAS Systems Wind Tunnels Wireless Sensors and Meters

Automatisation et Contrôle Étalons: Température & Pression Enregistreurs à Chartes Systèmes d’Acquisition de Données Enregistreurs de Données Débitmètres Éléments Chauffants: Flexibles, Immersibles et à Bandes Thermomètres Infrarouges Portatifs Cellules de Charge Instrumentation de pH et de Conductivité Transmetteurs de Pression Senseurs Photoélectriques et de Proximité Sondes à RTD et Thermomètres Sondes et Transmetteurs Sanitaires de Température et de Pression Conditionneurs de Signaux Jauges de Contrainte Thermocouples Blocs de Terminaison Transmetteurs Sondes USB et Systèmes d’Acquisition de Données Souffleries Senseurs Sans Fil et Indicateurs

Visit omega.ca/dilbert for your daily dose of DILBERT! Visitez omega.ca/dilbert pour votre dose quotidienne de DILBERT!

For Sales and Service, Call TOLL FREE

PRESS!

Over 150 Full Color Pages of State-of-the Art Products!

Omega Tab IFC

NEW! Nouveau!

HOT OFF THE

Includes 105 DILBERT Cartoons!

105 Bandes Dessinées DILBERT Incluses!

Shop Online at English Service Français

magasinez en ligne à

976 Bergar Laval, Québec Canada H7L 5A1

http://ept.hotims.com/34481-1

Dilbert © United Feature Syndicate, Inc.

© COPYRIGHT 2010 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED © COPYRIGHT 2010 OMEGA ENGINEERING, INC. TOUS DROITS RESERVES

00

e d i t o r i a l South African tour provides insights to electronics

electronic products andtechnology technology electronic products and Volume 33 Number 2

Having participated in an exclusive media tour of the electronics and ICT markets of South Africa this past November, I certainly came away with a deeper understanding of that country’s challenges and vast potential. Without a doubt, South Africa represents a promising emerging market in the world today and is among the most advanced economies on the African continent.

My host for this trip was Savant, the marketing arm for South Africa’s electro-technical sectors. The group represents a partnership between the federal government’s Department of Trade and Industry. As the lone Canadian media member on the tour, our group made visits to three of the country’s largest industrial centers including Cape Town, Durban and Johannesburg. With a population of more than 48-million, South Africa makes up just 4% of the continent’s surface area, but is responsible for approximately 40% of all industrial output. On top of this and maybe most importantly, South Africa has a strategic geographic position that provides an ideal gateway to Sub-Saharan Africa, verging on a population of 1-billion and representing unprecedented growth potential.

Its economy can be classified as a middle-income, emerging market with an abundant supply of natural resources, including certain strategic metal and mineral resources. Questions about available and affordable skills in the South African market have been answered for several large multinational high tech compa-

March-April 2011

Stephen Law Editor 416.510.5208 slaw@ept.ca

David Boss, P.Eng. Contributing Editor

Sohail Kamal

West Coast Correspondent

nies, which have located regional offices there.

South Africa’s ICT sector is an important cog in the country’s economy, representing a $28-billion industry, 65% of which is connected to telecommunications. It directly impacts all of South Africa’s economy, used as a major tool in its industrial, mining and agricultural sectors. The government’s mindset is to see its ICT sector expand, playing its role in servicing established, developed parts of its economy, as well as it increasingly becoming a tool for overcoming problems of poverty and inequality across South Africa.

Having already faced huge challenges politically, South Africans have proven to be adaptable - facing each test as an opportunity.

Among its many advantages, South Africa provides foreign investors with a Western business culture and similar timelines as most of Europe. And, possibly the most important point is that South Africa clearly understands markets within the African continent and the massive opportunity it represents.

The country withholds the technological and intellectual ability to develop something that complies with first world technology, but, is appropriate to the third world.

Stephen Law, Editor • slaw@ept.ca Follow me on Twitter http://twitter.com/#!/EPTmagazine

Joanna Malivoire

Peter Loney

Account Manager Direct: 866.868.7089 jmalivoire@ept.ca

Publisher 416.510.5207 pdloney@ept.ca

M12x1 Field Attachable Connectors with connecting area from 0.25mm2 – up to 0.75mm2

Sensor Actor Line

Tracy Lelyk

Art Director Group Administrator 416.510.5120 tlelyk@ept.ca

Tracey Hanson

Production Manager 416.510.6762 thanson@bizinfogroup.ca

Circular Connectors

Bona Lao

Subscription Inquiries 416.442.5600 ext 3552 blao@bizinfogroup.ca

Phyllis Wright

Print Production Manager

Bruce Creighton President

Alex Papanou Vice President

EP&T (Electronic Products & Technology) is published nine times per year: Monthly in February, May, August, September, October, Bi-Monthly January/February, March/April, June/July, November/December by:

Sensor Actor Line M8x1 Overmoulded Components and Sockets

BIG Magazines LP, a div of Glacier BIG Holdings Company Ltd. 12 Concorde Place, Suite 800, Toronto ON M3C 4J2 info@ept.ca Website: www.ept.ca Tel: 416.442.5600 Fax: 416.510.5133

00

Sales: 416.510.5207 • Editorial 416.510.5208

ISSN 0708-4366 (Print) • ISSN 1923-3701 (Online) Subscription Rates: Canada: $52 per year, US: $78 per year, International: $125 per year

Editorial Purpose: Electronic Products & Technology provides timely, comprehensive coverage of the latest worldwide developments and trends in electronic products, equipment and systems, and interprets their significance to manufacturers and end-users in the Canadian marketplace.

Sensor Actor Line 7/8” Overmoulded and Field Attachable Components as well as Sockets

Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: EP&T Circulation Dept., 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2, Subscription Inquiries: 416.442.5600 x3552 • circulation@ept.ca EP&T (Electronic Products & Technology) assumes no responsibility for the validity of claims in items reported.

As a leading connector manufacturer CONEC develops, produces and markets competitive high quality connectors worldwide, suitable for high-end applications.

© 2011

Quality oriented users in the Industrial Electronic, Automation and Communication Industry trust and value the quality products from CONEC.

This publication or any part of it may not be reproduced, stored or transmitted in any form whatsoever without the express written consent of the publisher. From time to time we make our subscription list available to companies and organizations whose products and services we believe may be of interest to you. If you do not want your name to be made available, please contact EP&T with your subscription number.

Printed in Canada

Series of Regional High-Tech Electronics Shows

MONTREAL • April 5 TORONTO • April 7 Register FREE online at http://www.ept.ca/eptech/

www.pmr-werbung.de 0210/10347

We acknowledge the financial support of the Government of Canada through the Canada Periodical Fund (CPF) for our publishing activities.

CONEC designs and manufactures products in modern facilities.

The products are made in accordance to the highest quality standards and industry specifications.

CONEC provides reliable and effective solutions to OEM, EMS and cable houses.

Circular Connectors from CONEC: Quality keeps connected!

CONEC Corporation 125 Sun Pac Blvd. • Brampton Ontario • Canada L6S 5Z6 Tel. +1 905 790 2200 • Fax +1 905 790 2201 E-Mail info@conec.com

www.conec.com http://ept.hotims.com/34481-2

Sensor Actor Line Bus Systems Overmoulded Components and Sockets for Profibus DP, Industrial Ethernet and DeviceNet

Sensor Actor Line Overmoulded Components, Sockets and Junction Boxes for Food+Beverage

003

400

representatives and ditributors

NEWSWATCH

N E W S WAT C H NEWSWATCH

Atlas Micro and Mecca finalize joint venture

Pointe-Claire QC-based custom manufacturing specialists Atlas Micro Electronics has finalized a joint venture with Hong Kong-based vertically integrated EMS provider Mecca Electronics Co. Ltd., whereby Atlas Micro will become reflagged as Mecca Manufacturing and responsible for all business matters in North America.

Both companies have had a strategic and symbiotic partnership that developed successfully over the past seven years. Mecca, having multiple factories located in Dongguan China, has been in operation for more than 25-years. With the new arrangement in place, it ensures customers are dealing directly with the manufacturing facilities and resources locally as well as globally, according to Tony Fama, executive VP for Atlas Micro Electronics.

“Our ability to provide the best manufacturing services with proven quality, renowned on- time delivery and clear communication is our strength, which positions us with ‘preferred vendor’ status at many customers”, says Fama.

“Our manufacturing strategy ensures our customers’ products will have the best of class quality, cost effectiveness and most importantly, meet the necessary timelines to satisfy your market demands. Whether our customers select us for metal fabrication, plastic mould injection and/or pcb assembly, you eliminate the need to have multiple suppliers manage your requirements in these areas,” Fama notes.

Protocase Inc., Sydney NS, is now providing in-house chromate chemical conversion coating, commonly known as ‘chem film’. This treatment is applied to aluminum, zinc and magnesium in order to improve corrosion resistance, and to provide reliable electrical conductivity.

In electronic applications, it is often used to ensure reliable ground connections to aluminum enclosures and chassis, while also serving as an effective pre-treatment for powdercoat. Protocase’s chemical conversion coating process meets a number of specifications and qualifies as Type II, Class 1a and 3 under MIL-DTL-5541F. It is RoHS compatible and free from toxic hexavalent chrome.

Because the coating is applied in house, it can be specified on Protocase-fabricated parts without adding extra lead time. Protocase customers now have access to fully finished chem-filmed aluminum enclosures and components in as little as 2-3 days.

Protocase will provide rapid coating service on customer-supplied parts, also with lead times as low as 2-3 days, depending on quantity.

“Our new in-house facility is optimized for our batch sizes and integrated into our real time job control system. So our customers can now have chem film coating without any extra lead time, and we also will be passing along the money we save by avoiding the shipping, handling and overhead costs that come with dealing with a third-party,” says Dr. Douglas Milburn, VP sales and marketing, Protocase.

Sensor Solutions Thermistors

High precision, NTC-type, available with a wide range of packaging and termination options.

Axial, Radial, SMD, Thin Film

Temperature Sensors

Thermistors packaged for a wide range of measurement applications.

Configurations include: Studs, Tubes, Rings, Clips and Pipes with various leads and terminations.

Medical Thermistors

Ultra-small probe for catheters; Thin-film for digital thermometers; Infrared thermopile for eardrum sensing.

Non-Contact Infrared Detectors

High-output remote temperature sensing with two precision thermistors and IR elements packaged in metal housings with leads and connectors.

Toronto-based TÜV SÜD Canada testing and certification organization has acquired Innovative Testing Solutions (ITS) a diversified and experienced testing laboratory.

Based in Newmarket ON, ITS provides ISO/IEC 17025 A2LA accreditation, as well as testing of batteries and electrical components, along with environmental and mechanical life cycle testing.

“The acquisition of ITS further strengthens TÜV SÜD’s presence and testing capabilities in the North American market,” says Karsten Xander, CEO & president of TÜV SÜD America. “We are excited to serve the growing demand for testing and consulting solutions in the e-mobility sector. Our goal is to offer fast turnaround times as we work with our customers to develop safe and sustainable products,” Xander adds.Battery testing facilities within the 21,000 square foot, climate controlled ITS lab provide abuse, durability and life cycle testing of battery cells, modules and packs. The combined talent and experience of the ITS and TÜV SÜD teams are available to support e-mobility projects, assisting with test equipment and controls development, test planning, data acquisition, testing, and certification.

“Both companies are committed to providing the best battery and mechanical testing services possible to our customers. We are confident that the integrated resources will provide our customers with unique benefits in the area of large-format battery testing and allow us a substantial growth opportunity globally,” says ITS president Darryl Fleger.

Northstar Electronics seeks to acquire MAQ Sonar Northstar Electronics Inc., Vancouver, specialists in engineering, systems integration, prototyping and production services to customers in the defense and Homeland Security industries, has signed a letter of intent to acquire privately held MAQ Sonar.

MAQ Sonar has designed and built advanced omni-directional sonar systems, primarily for the commercial fishing industry, since 1978. At its factory and R&D center in southeastern Ontario, MAQ Sonar has built, tested and assembled many sonar systems now being used from Alaska to Chile and from Russia to South Africa.

“MAQ Sonar provides cost-competitive advanced sonar products to commercial fisheries worldwide,” says Phillip Johnson, chief technical officer, MAQ Sonar. “In addition, key senior staff members are leading experts in defense high-frequency sonar technology with extensive experience in homeland defense systems. We see the coming together of this talent base, MAQ’s efficient manufacturing processes, and Northstar’s exposure in the fisheries and defense sectors, as a ‘win-win’ acquisition.”

Dr. Wilson Russell, CEO, Northstar Electronics, stated, “MAQ Sonar brings world-class sonar capabilities which perfectly complement Northstar’s current defense-oriented technology base. We have previously worked closely with several of MAQ’s senior personnel on advanced sonar developments for both anti-terrorism and naval applications. In addition, we believe that MAQ is a vibrant, growing company in the commercial fishing industry, and we look forward to supporting and expanding our mutual interests in that industry.”

“The need for innovative sonar systems is greater right now than ever,” Dr. Russell added. “Together, we expect to build a stronger, highly competitive sonar business combining both the commercial and defense markets.”

Teledyne Technologies Inc., Thousand Oaks CA, has entered into a definitive agreement to acquire DALSA Corp., Waterloo ON, including all of the outstanding common shares valued at approximately CN$341-million.

DALSA is an international leader in high performance digital imaging and microelectromechanical systems (MEMS) with approximately 1,000 employees worldwide. Established in 1980, DALSA designs, develops, manufactures and markets digital imaging products and solutions, in addition to manufacturing custom MEMS products. DALSA’s imaging products and services include high-resolution, high-performance CCD and CMOS imaging sensors, electronic digital cameras and image processing software for use in industrial machine vision, advanced medical imaging and high resolution aerial and satellite imagery. For the twelve months ended September 30, 2010, DALSA had sales of approximately CAD $201 million.

Teledyne is a provider of electronic subsystems, instrumentation and communication products.

Thermopiles

IRWIN Industrial is proud to be an authorized distributor of Semitec products

Electronic Components & Hardware 800-263-3562 irwin-ind.com

Vancouver, BC

To meet the needs of its growth pace, Tri-M Technologies Inc. has moved its business operations to a redeveloped facility that provides a layout specifically designed for increasing systems integration capabilities, developing software solutions, efficiently building products and providing a dedicated test area.

There’s also more office space to account for the recent increase in staff and to accommodate future hiring, according to company president and CEO John Diack.

“Our existing (Vancouver) location was suitable while we were operating as two separate entities, but now that we’ve merged we’re finding the physical divide to be a functional challenge to the new business that puts limitations on our growth plans”, Diack says.

Tri-M, a developer of power supplies and computing solutions for embedded applications, is now located at 101 – 1530 Kingsway Avenue, Port Coquitlam BC. “We’ve designed the layout of the new location so our teams can communicate easily with a logical work flow between departments. We were able to set up the entire facility, keeping our industry and product development needs in mind, by creating anti-static environments and areas designed for testing and development,” says Diack.

Teledyne Technologies to acquire DALSA Corp.

TO-18 packages include thermistors and infrared sensors utilizing Semitec’s own silicon micromachining technology.

Calgary, AB

Tri-M Technologies moves into new location

TÜV SÜD acquires Innovative Testing Solutions

Protocase delivers in-house chemical film coating of aluminum

Connectors & Cables Mechanical Hardware Optoelectronics Power Products Printers & Labelling Protection, Suppression & Shielding Switches & Relays Thermal Management Wire Management

electronic products and technology • march-april 2011

Richmond Hill, ON HQ

Montreal, QC Rochester, NY

Sales Scholarship Available The CERA is making a scholarship available for an individual currently involved in the electronics industry to further their sales knowledge. The $1,000 grant is available for an individual to take either the Canadian Sales Professional offered by CPSA or the CPMR course offered at the University of Phoenix. Program details can be found at www.cpsa.com or www.cpmr.biz If you wish to submit your application for this yearly grant, please send a short letter and resume indicating why you would like to be considered. Please send this to bgidden@bell.net.

http://ept.hotims.com/34481-3

full online product listings at.ept.hotims.com

http://ept.hotims.com/34481-4

representatives and distributors

electronic products and technology • march-april 2011

Re

pr es

ent

Fox Electronics appoints Ross Weiss

atives and Dis t

Buoyed by its success and overall growth of 41% through 2010, global supplier of crystals and oscillators Fox Electronics, has expanded it direct sales services into Canada, establishing FOX Electronics Canada.

The new sales division will be led by electronics industry veteran Ross O. Weiss, who has assumed the role of vice-president North America sales. Weiss brings more than 30-years experience in the electronics component industry to the post, most as president of Montreal-area based Weiss Co. Ltd., a manufacturers’ representative.

“His vast experience with reps, distributors and OEM customers will make a big difference in Fox achieving its goals,” says Fox Electronics president E.L. Fox, Jr. “Last year was a very good year for Fox. Overall we grew 41%, while our XpressO sales grew an impressive 103%. Our GOAL for XpressO this year is to double again.”

Effective immediately, Weiss becomes responsible for relationships with the manufacturers representatives and Fox’ key distributors. Other Fox personnel adjustments include engineering sales managers, David Meaney and Roger Burns, who will focus more on design and engineering applications in support of the firm’s sales channels.

“They will continue to focus their energies in developing our ‘sweet spot’ applications for XpressO,” says Fox.

ri

bu t o

rs

6

SP International adds JHD displays Burnaby BC-based EMS provider SP International has reached an agreement with Chinese LCD manufacturer JHD; giving them sole representation and distribution across Canada.

“As part of our low cost leader initiative, we have been actively looking for an established off-shore module and LCD manufacturer for the past year,” says Bryce Wassersleben, SPI sales and quality control manager. “During our site inspection, we were thoroughly impressed with their manufacturing facility and have full confidence in their quality control. This partnership will give us the ability to offer additional cost savings to our customers on a historically expensive component.”

JHD has been designing and manufacturing LCD and LCD modules for the past 24 years. Some of the major customers include: LG, Sony, Samsung, GE, JVC and OTIS.

Newark and element14 launch LED microsite Electronics distributor Newark and its element14 engineering community have launched a microsite dedicated to LED lighting technology, aimed at providing engineers with a comprehensive LED lighting destination at http://www.newark.com/lighting.

Offering solution-based guidance for applications such as street lighting, solar power signals and RGB color mixing, the microsite also delivers access to a wide range of design and collaboration tools.

In addition to application notes, white papers, training resources, design tools, and videos, the new LED site enables engineers to view and purchase from a best-in-class product portfolio available for same day shipping. Engineers have access to a wide range of lighting components from top brands such as Cree, Avago, Bridgelux, Ledil and Lumex to design a complete lighting solution, including high power/high brightness LEDs, LED modules and arrays, indicators, thermal and power management products, optics and lamps.

Avnet teams with H&D Wireless, TDK Avnet Electronics Marketing Americas, Phoenix AZ, has inked a distribution agreement with H&D Wireless AB, supplier of Wi-Fi solutions that enable wireless sensor and multimedia data access to the Internet. H&D Wireless Wi-Fi solutions cater to the energy control, digital media, health care, automotive and location and tracking markets.

Leveraging its strengths in embedded system architecture, low-power analog, and RF design, H&D Wireless’ suite of Wi-Fi products is supported by leading microcontroller platforms and provides design engineers with fast integration and accelerated time to market.

Avnet has also reached a distribution agreement with TDK Corp. of America, Lincolnshire IL, and will carry the full line of TDK passive electronic components, including multilayer ceramic capacitors, inductors, magnetics and RF components.

“We are excited about our new partnership with Avnet, as they have a long successful history in the electronics industry and their extensive knowledge combined with TDK’s products makes a 1-4 page Canada 2 12/4/09 natural partnership,” says Ad Jon2010:Layout Nelson, president, TDK Corp. 12:59 PM Page 1

Precision Cleaning Solvent

m

Contact Re-Nu®

s

Acrylic Conformal Coating

MS-580

s

m

m

s

Contact Re-Nu® & Lube

m

s

MS-730

MS-465N MS-738

Vertrel XF Cleaning Agent

m

s

MS-780

Release Agent Dry Lubricant

m

Plastic, Glass & Metal Cleaner

s

m

s

MS-122AD

MS-260

Miller-Stephenson Offers a Wide Range of Chemicals for the Electronic Industry! What are your Requirements?

Flux Removers Solvent Cleaners Contact Cleaners

Connector Lubricants Conformal Coatings Aero-Duster®

Freeze Spray PTFE Release Agents Krytox® Lubricants

m

s

Toronto, Ontario Canada 416.675.3204 / Fax 416.674.2987 800.323.4621 Technical Service e-mail: support@miller-stephenson.com www.miller-stephenson.com

http://ept.hotims.com/34481-5

Indium expands sales efforts in Canada Indium Corp. has appointed CCR as its newest sales channel partner in Canada, responsible for distributing Indium’s solder products, including solder paste, wire, rework fluxes, engineered solders and thermal interface materials.

Based in Ottawa, CCR has been a distributor in Canada for more than 20-years.

CCR sales manager Terry The sales process will be managed by Terry O’Neal shakes hands with O’Neal, sales manager, for CCR’s electronics Jeff Anweiler, regional sales assembly materials. O’Neal has more than 27 manager for Indium Corp. years of technical expertise in the electronics assembly industry.

“This new partnership with CCR greatly improves Indium’s ability to supply and service the local Canadian market. In addition, customers will benefit from this locally established supply chain. CCR has built their reputation on providing high quality products and exceptional customer service, which mirrors Indium Corp’s value proposition,” says Jeff Anweiler, regional sales manager, Indium.

Sager moves into industrial marketplace with IDEC Sager Electronics, Middleborough MA, has reached a distribution agreement with IDEC Corp., manufacturer of control and automation products.

“IDEC’s mission is to provide our customers with high quality, safe, reliable and innovative products,” says Rajiv Salhotra, IDEC’s director of sales. “By partnering with Sager, a strong brand in the mid tier industrial market, we’re able to offer our customers the high level of service.”

“IDEC’s products enjoy outstanding brand recognition in the industrial market and are aligned particularly well with Sager’s strategy,” adds Faris Aruri, Sager’s VP of corporate marketing.

Mouser inks multiple global partnerships Mouser Electronics Inc., Mansfield TX, has reached a distribution agreement spanning the Americas with Epson Electronics America Inc., a leader in crystal, oscillator, and real time clock (RTC) devices.

Mouser has also teamed with Arduino in forming a worldwide distribution partnership. Arduino is an open-source physical computing platform based on flexible, easy-to-use hardware and software.

The new global distribution agreement with Arduino gives Mouser a singleboard computing solution with a 100,000-user-strong design community, while providing a cross-development platform centered on the Atmel AVR 8-bit microcontroller, especially well suited for expanded functionality by simply adding one of the various ‘shields’ to the main Arduino board.

Mouser launched a major global distribution partnership with Maxim Integrated Products Inc., Sunnyvale CA, supplier of high-performance semiconductor products and tools.

Digi-Key signs multiple global disty agreements Digi-Key Corp., Thief River Falls MN, has reached global distribution agreements with a variety of electronic component players, beginning with Taoglas Ltd., a global antenna solutions provider. Taoglas specializes in producing M2M antennas, including finished and custom external and embedded antenna solutions for ISM (Zigbee, WiFi etc), cellular (GSM/CDMA), 3G, 4G (WiMax, LTE) and GPS. Their products assist customers achieve greater wireless device transmit and receive sensitivity.

Digi-Key also signed disty deals with Midé Technology, Medford MA, specialists in developing ‘smart’ technology products and materials. “Electronics is playing a key role in both creating more efficient use of current energy sources and helping to identify and cultivate alternative sources,” says Dave Doherty, Digi-Key’s VP semiconductor products.

Digi-Key will also distribute ITT Cannon connector products to customers worldwide. “We support ITT Cannon’s ability to add new product innovations and appreciate their commitment to quality,” says Jeff Shafer, Digi-Key VP of interconnects.

Digi-Key will distribute Interlink Electronics products to customers worldwide. Interlink is an innovator of thin film Force Sensing Resistor (FSR) technology, which measures the force in diverse applications such as robotics, Smartphone user interfaces, and machine control.

Initially used in electronic drums and other musical instruments, FSR technology is now optimized for use in devices such as handheld gaming devices, portable media players, mobile phones, digital cameras, navigation devices, and other portable electronics.

Digi-Key as also added Advanced Linear Devices, Inc. (ALD), a globally recognized company that develops precision CMOS linear integrated circuits.

http://ept.hotims.com/34481-6

products on review

electronic products and technology • march-april 2011

Advanced capabilities included in affordable oscilloscope portfolio

Workstation delivers adjustable height range

26 models comprise firm’s next-generation InfiniiVision 2000 and 3000 X-Series mixedsignal and digital-storage oscilloscope portfolio. InfiniiVision 2000 X- Series provides bandwidths from 70MHz to 200MHz and delivers fast waveform update rate and improved viewing of signal detail and capture of infrequent events.

InfiniiVision 3000 X-Series scopes step up performance while holding prices in line, providing bandwidths from 100MHz to 500MHz and industry-leading waveform update rates of 1-million waveforms per second. Options include a 16-channel MSO, an integrated function generator and hardware-accelerated serial protocol decode.

AGILENT TECHNOLOGIES

Align adjustable height workstation provides high level of ergonomic comfort, flexible functionality and enhanced productivity. Unit can be easily adjusted to accommodate the worker with the appropriate work surface height range of 27” to 42” (not including worksurface). Product can be adjusted through the use of a motorized, hand crank or slide leg base.

LISTA INTERNATIONAL

http://ept.hotims.com/34481-132

http://ept.hotims.com/34481-136

C-mount lenses boost Infra-red light spectrum EL1025IR and 2516-CIR 25mm CCD lenses join firm’s existing line of C-mount lenses, suitable for imaging applications in the Infra-red light spectrum. Available in format coverage of up to 16mm with a brightness ratio of 0.95, products provide a cost effective solution for low light imaging and other demanding applications.

Available from stock, lenses are suitable for use in forensic, industrial, scientific and other imaging applications.

UNIVERSE KOGAKU AMERICA

Die-cast aluminium enclosures line adds 9 sizes

Nine sizes have been added to firm’s 1550 family of industry standard sizes small die-cast aluminium enclosures.

Products provide robust mechanical protection and good EMC attenuation levels. The tapped holes and machine screws used to secure the lid make them particularly suitable for use where interior access will be required on a regular basis in a wide variety of applications. Available with a natural or black epoxy powder coated finish, the units are Specials valid from NOW till April 8th, 2011 supplied in two versions, standard and watertight. The sizes range from 60 x 55 x 26mm to 275 x 175 x 63mm; the standard units are sealed to IP54.

HAMMOND MFG

PDIM (Pre-Deposited Images in Metal) is a PET-based film available in thicknesses ranging from .0005” to .010” with electrically conductive graphic or circuit images ‘deposited’ onto its surface. Product’s fine line resolution capabilities allows for conductor traces down to 10µm in width to be laid into a grid pattern allowing over 90% clarity. Available conductors are aluminum, copper, silver or nickel.

With Aluminum as the conductive material sheet resistivity of 10-ohms or less have been demonstrated, with Copper or Silver the conductivity will be better. The ability to incorporate graphics or circuitry within or bordering the grid is possible.

CALEDON CONTROLS http://ept.hotims.com/34481-134

$60

BUY 5 for the price of 1!

WOW

ACT # 86736 MPN # 170MBK

Reg. Price $14999 99 WES51 Analog Soldering Station Sale Price $109 00 • Improved plug on PES51 iron and new receptacle REBATE* US$20 on the power unit for easier iron replacement You PAY $8999 • Temperature Range 350ºF-850ºF (177ºC-454ºC) • Comes with ETA tip

Memorex DVD+R 16x 4.7G - 5pk with Slim Jewel Case Storage

* Mail-in rebate valid until April 8th, 2011. Qtys limited.

Rechargeable Backup Battery for iPhone/iPod® • Portable charging for iPhones® and iPods® • Extends battery • Rapid charge

799 WOW

9

99

360˚ Notebook Holder

• Set laptop at different angles • Swivels 360˚ ACT # 96451 • Keeps computer cool

7

50

WOW

REG. $4499

2249

Specials valid from NOW till April 8st, 2011

Save

50%

MPN # KC68125

REG. $1499

WOW

ACT # 96696 MPN # P-1PXPB

• 98 bits, sockets adapter, dry wall stopper, bits holder and magnetic bit holder • Chrome vanadium steel bits

ACT # 95954 MPN # SD-2310

®

®

®

iPhone and iPod is a trademark of Apple Computer, Inc

4-Port USB Hub • USB 1.1 • Data transfer speed up to 12 Mbps • Cable length 3 ft.

WOW

6

99 Quantities limited

ACT # 96664 MPN # HO97958

www.active123.com

If the Active insert is missing from this issue, please go to: http://ept.hotims.com/34481-7

w w w. e p t . c a

60%

REG. $2499

See p27

100 Piece Power Bits Set

50%

Save

$250

REG. $1599

WOW

Save

$899 $599 US$500 .99

WIN A

Prepaid

150

50%

Reg. Price Sale Price REBATE* You PAY

Resistor Kit - 610 pieces 61 standard values ranging from 10Ω to 1MΩ (10 pieces per value) ACT # 18033 MPN # K/RES-E12

REG. $299

Save

170MBK

* Mail-in rebate valid until April 8th, 2011. Qtys limited.

WES51

50%

http://ept.hotims.com/34481-135

ea.

Save

$8

Save

DCW 202R dual-output railway quality dc-dc converter utilizes high-efficiency power conversion technology to deliver 150W output power depending on the required input/output configuration.

Both outputs are fully regulated, independent and isolated from each other; this ensures that a short or overload condition on one output would have no effect on the other output. Each of the two outputs provides any voltage between 5Vdc and 125Vdc. The nominal input voltages are 24V, 36V, 48V, 72V, 96V or 110Vdc with wide input ranges (according to EN50155).

ABSOPULSE ELECTRONICS

.99*

8999*

The DVD+R disc is write-once, single sided and can store up to 4.7GB of data • 2 Hours of video ACT # 96697 • 16x Write speed MPN # 32025622

Dual-output dc-dc converter withstands severe environments

• Flush cuts soft wire up to 20AWG (0.8mm) • Made in USA

ACT # 86250 MPN # WES51

Save

WOW

General Purpose Cutters

ELECTRONICS SUPPLIES DEPOT

http://ept.hotims.com/34481-133

Clear conductive PET film uses PDIM metal deposition techniques

http://ept.hotims.com/34481-137

7

8

products on review

electronic products and technology • march-april 2011

Automatic cut & strip machine processes 70mm2 wires

Tank circuit LF antenna is fully protected for automatic assembly

PowerStrip 9550 Automatic Cut & Strip Machine processes wires as large as 2/0 AWG (70mm2). Unit combines precision and performance, while covering a wide range of applications, from stranded wire to multi-conductor cables, as well as coaxial and other shielded cables. Machine is modular in construction and provides various processing modules, such as the cutting head type, can be combined with various function modules, such as the 4-zone belt feed, resulting in a machine that is tailor made for each customer.

SCHLEUNIGER

Premo Group RCA-THT Series DCF and ripple control, antenna for applications using atomic watch signals. There are several clock signal transmitters in different countries such as: WWVB-60kHz (USA), to cover different zones.

These long wave transmitters use FSK modulation with frequency precision of +/- 107Hz and signal speed of 200Bd. The through-hole device can be set and tuned in different frequencies from 40kHz to 139kHz, for clock applications (synchronization with atomic clock, 40 and 60kHz in Japan, 77.5 kHz in Germany, etc.) and power control and management applications.

DB LECTRO

http://ept.hotims.com/34481-138

http://ept.hotims.com/34481-140

Portable plotter matches ID markers for electrical components

Miniature, metric pcb screw terminal suits 22-15AWG wire

MCP Basic generation plotter complements firm’s MultiCard identification markers for terminal blocks, wires, cables and other electrical equipment. Unit uses plotter technology, is compatible with MultiCard marker formats and works in conjunction with firm’s M-Print Pro software. The light and small product is portable and comes with a travel case for easy transport and storage.

WEIDMULLER

Keystone Electronics miniature, screw terminal type binding post is suitable for 22-15AWG wire and used in high density pcb packaging. Rated 15 Amps, this compact, low profile design facilitates a broad range of capabilities for a number of applications with space-saving, cost-effective versatility. Made of tin plated brass and a zinc plated screw, the devices are supplied assembled or unassembled. Cat. No 8737 is supplied completely assembled with a screw and wire retention contact to aid in preventing wire damage.

EMX ENTERPRISES

http://ept.hotims.com/34481-139

http://ept.hotims.com/34481-141

LED lighting strips suit multiple applications Line of LED strips are available in four IP ratings, 6 colors and 3 lengths. The 12 volt dc powered strips are available in IP20 and IP65 with adhesive backing in blue, green, red, yellow, white, warm white and lengths of 500mm, 1 meter and 5 meters. They are also available in IP67 and IP68 ratings with the same colors and lengths.

MODE ELECTRONICS http://ept.hotims.com/34481-142

Wireless Zigbee module simplifies Smart Energy designs MWS SyChip ZigBee module is compliant with the Utility Smart Network Access Port (USNAP) version 2 specifications and enables simple, protocol independent designs for applications within the Smart Energy Home Area Network (HAN) market.

Device is a fully integrated, FCC certified, ZigBee PRO module with +20dBm output power, a 2.4GHz antenna and 1MB of serial flash memory. Product provides best-in-class ZigBee RF performance with a 124dB link budget for long range.

MURATA http://ept.hotims.com/34481-143

Ceiling mount antenna widens bandwidth performance OM-DW Series antennas cover all popular frequency bands from 860MHz through 5.88GHz, eliminating the need to stock multiple antenna frequencies.

Wide bandwidth performance and smooth omni-directional pattern are suitable for wireless applications. Unit has streamlined profile and its mounting and RF connection is achieved through a single hole in the mounting surface.

ANTENNA FACTOR http://ept.hotims.com/34481-8

http://ept.hotims.com/34481-144

full online product listings at.ept.hotims.com

mouser.com

Semiconductors and electronic components for design engineers.

We’ve got what design engineers need. The future.

You’ll nd the newest products for your newest designs.

Get what’s next at Mouser.

Scan Here

mouser.com Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. The Newest Products for Your Newest Designs is a registered trademark of Mouser Electronics, Inc

10

electronic products and technology • march-april 2011

Power Supplies/Medical Applications

Dc-dc converters and

electromagnetic interference

By Joe Sullivan, product marketing manager, Vicor Corp.

Electronic systems throughout the world are powered by direct current (usually after ac rectification), which in most cases is converted by dc-dc converters to the voltages needed by each part of the system. Today, power conversion is usually accomplished by high-density dc-dc converter components based on highfrequency switching technologies. Efficient high-frequency operation has long been recognized as the key to achieving high-power density and improved performance in switch-mode converters. High-frequency operation translates into smaller magnetics and capacitors, faster response times, lower noise levels and smaller filters.

Unfortunately, however, all dc-dc converters generate electromagnetic interference (EMI) or noise. This noise - common mode, differential mode and radiated noise - can vary widely among dc-dc converters from supplier to supplier and topology to topology.

The reasons for this are diverse, but they include fundamental differences in the way noise is produced.

Although many different topologies are used, none is superior to all others in every respect. Some applications have requirements that are best satisfied by a specific topology.

Although the number of designs, or topologies, of dc-dc converter components certainly number in the hundreds, two dominate: pulse-width modulation (PWM) and quasi-resonant zero-current switching (ZCS).

In any case, full consideration of the large number of topologies available could be a daunting task, so it is helpful to consider the noise performance of the two main topological classes. Specifically, a comparison is made between dc-dc converters using fixed frequency PWM and variable frequency quasi-resonant ZCS. PWM converters are power density limited because they inherently trade off efficiency against operating frequency. The problem is “switching losses.” Heat is generated in the switching element each time it discontinuously makes and breaks inductive current flow during its brief turn-on and turn-off transitions. Power dissipation, due to switching losses, increases directly with operating frequency in PWM converters until it becomes a dominant loss factor. At that point, efficiency declines rapidly and the thermal and electrical stresses on the switch element become unmanageable. Losses attributable to non-zero-current-switching result in a ‘frequency barrier’, which limits achievable power density in conventional converters.

Quasi-resonant ZCS converters overcome the frequency barrier by implementing a forward converter switching at zero-current.

Each switch cycle delivers a quantized ‘packet’ of energy to the converter output, with switch turn-on and turn-off occurring at zero-current.

Zero-current-switching results in an essentially lossless switch. ZCS converters can operate at frequencies in excess of 1MHz. By eliminating the fast current disFIG. 1: Current waveforms produced by zero-current switching continuities characteristic and pulse-width modulation of conventional topologies,

FIG. 2: Current waveforms and spectral content for PWM (top) and ZCS (bottom). Note: waveforms not drawn to scale.

zero-current-switching results in a virtually loss less transfer of energy from input to output with dramatically reduced levels of conducted and radiated noise.

The noise generated by the switch is a major difference between PWM and ZCS converters. With the pulse-width modulation approach, the input voltage is switched at a constant frequency (usually several hundred kilohertz) to create a pulse train. The width of the pulses is adjusted to provide the necessary power to the load at the correct voltage. At full load, the current waveform looks much like a square wave (see Figure 1.)

Many designers intuitively assume that it’s easier to design a filter for a fixed frequency converter than for a variable frequency converter. In actuality, the opposite is true. The perception is, in all likelihood, attributable to the term ‘fixed frequency’, which is actually a misnomer. Both topologies, in fact, have frequency elements that are more or less fixed and frequency elements that vary as a function of operating conditions.

Figure 1 compared the waveforms of the current flowing through the main switch.

In a module using a quasi-resonant topology, the pulse width, T1, is fixed, while the repetition rate, T2, is variable, and in a module using PWM, the opposite is true; the repetition rate is fixed and the pulse width is variable. Each of these topologies generates characteristic noise spectra as shown in Figure 2.

In the variable-frequency design, however, there are no high-frequency components associated with the leading and falling edges of the current waveform, T3, because it is essentially a half-wave rectified sine wave. The spectral content of the variable frequency waveform is lower in amplitude and contained in a narrower band.

In PWM converters, most of the energy is at the fixed frequency and odd multiples (harmonics) of it. A 100kHz PWM converter will have most of its conducted noise at 100kHz and some at 300 and 500kHz. They also have significant harmonics at or above 10-30 MHz due to the shape of the current waveform, i.e., high di/dts that excite parasitic elements within the converter.

The input conducted filter has to be sized to handle maximum power at 100kHz. In the fixed frequency waveform, the spectral content is higher in amplitude and spread over a broader range of harmonics.

It is clear that an effective first step to minimize noise generated by the dc-dc converter is to select a topology - such as zero-current switching - that is inherently lower in common mode noise. Incidentally, some products should be avoided in noise-sensitive applications. Control devices mounted on copper plates, for example, create parasitic capacitance from primary referenced control devices to secondary referenced control devices through the copper base, resulting in high common-mode noise.

Although component power modules usually incorporate some internal input and output filtering, additional external filtering is often needed to meet either system requirements or agency specifications. For example, FCC and European agencies specify the allowable levels of power supply noise that may be conducted back into the ac line.

Many designers tackle these issues on their own, but most dc-dc converter manufacturers provide detailed application. In addition, some dc-dc converter suppliers also offer ac front ends and EMI filters as modular accessories. These filters not only save time; they are a means of risk prevention as well. The EMI filter is designed to work with the supplier’s converter modules, and, assuming proper layout, the combination is certified to meet the specified EMC directives.

For more information on dc-dc converters and electromagnetic interference from Vicor Corp., go to http://ept.hotims.com/34481-60

http://ept.hotims.com/34481-9

full online product listings at ept.hotims.com

power supplies/medical applications

electronic products and technology • march-april 2011

Digitally controlled power supply meets medical specs EFE400M series digitally-controlled medical/ITE power supplies range from 300W to 400W. Units come with a 4kVAC reinforced input to output isolation and an output-toground isolation of 1500Vac, the EFE400M meets the rigorous international safety standards of IEC/UL 60601-1 for medical equipment. Regulated dc outputs of 12V, 24V, or 48VDC are standard, plus other voltages can be provided.

TDK-LAMBDA AMERICA

200W switching power supply withstands industrial environment PFC 53-125EH industrial quality ac-dc plug-in switching power supply generates 200W output power. Unit employs established field-proven topology, which includes a power factor corrected input and a following half-bridge stage, to convert the universal ac input voltage to a 125Vdc output, with convection cooling. All heat-generating components on the module are installed on aluminum heatsink blocks, which are connected to the heatsink fins on the side of the module, ensuring excellent heat dissipation.

ABSOPULSE ELECTRONICS http://ept.hotims.com/34481-64

http://ept.hotims.com/34481-61

Conduction cooled ac-dc supply suits sealed enclosures

High power pcb terminals enhance design flexibility

ECC100 series of 100 Watt single output baseplate cooled ac-dc power supplies designed specifically for use in sealed boxes and harsh environments where wide temperature variations are common place. Units operate from – 40C to + 75C and measure 83.8 x 127.0 x 39.4 mm, while using conduction cooling to transfer heat through the chassis. No fans or forced airflow is required for the unit to operate at full power.

XP POWER

LXXX Line of high power printed circuit board terminals and connectors boost the amount of power delivered to a pcb and improve design flexibility for high current applications. The UL rating of 127A per contact gives the device the highest current carrying capacity available. Product accommodates wire up to 1 AWG, with a maximum operating temperature of 120C. WEIDMULLER

http://ept.hotims.com/34481-65

http://ept.hotims.com/34481-62

High output voltage power modules drive loads up to 3A LMZ14201H, LMZ14202H and LMZ14203H SIMPLE SWITCHER power modules are easy-to-use and provide the efficiency of a synchronous switching regulator with the simplicity of a linear regulator, eliminating the external inductor and complex layout placement challenges typical of switching regulator designs. Each device accepts an input voltage rail between 6V and 42V and deliver an adjustable and highly accurate output voltage up to 24V. A single resistor adjusts the switching frequency to enable greater flexibility of design.

NATIONAL SEMICONDUCTOR

Rugged, small ac power meters display brightly Datel ACM20 Series four-function digital ac power meters come in two models: ACM202-AC1-R-C and ACM20-2-AC1-R-F-C, both provide measurement resolution of 0.001A and 0.1W. Product’s increased resolution enhances testing of low-current ac-powered products. Unit displays the critical measurements in mains-powered equipment: voltage, current, active power (watts) and either power factor or frequency, depending on the model. A front panel selector-switch provides two modes of operation.

MURATA http://ept.hotims.com/34481-66

http://ept.hotims.com/34481-63

High-Volume Electronic Power

trAnsformers Hammond Manufacturing provides a solution with our wide range of standard, in-stock transformers for both small quantity prototyping needs and high-volume production requirements.

Line

Audio

Chokes

Hammond Manufacturing has maintained full production capability in our Waterloo, Ontario facility. In addition, we have established a network of Hammond-approved offshore production partners.

Hammond Manufacturing offers the convenience of local production and inventory, combined with the cost benefits of offshore sourcing.

Make Hammond your first call for high-volume magnetics!

Email: 5C@hammondmfg.com

Toll Free: 877-411-5911

www.hammondmfg.com

CLAss 2 If the Hammond inert is missing from this issue, please go to: http://ept.hotims.com/34481-10

w w w. e p t . c a

Transformer quesTions?

Hammond transformer engineers will be at an EPTECH show near you!

11

12

power supplies/medical applications

electronic products and technology • march-april 2011

Automotive power MOSFETs deliver system scalability AUIRF7738L2 and AUIRF7737L2 Automotive DirectFET 2 power MOSFETs improve power density, dual-sided cooling and minimal parasitic inductance and resistance for heavy load applications. Devices provide overall system level size and cost reductions along with superior performance and efficiency when compared to traditional standard plastic packaged components. Product has a pcb footprint 60% smaller than a D2Pak, and provides low on-state resistance (RDS(on)).

INTERNATIONAL RECTIFIER

Power supplies are UL/cUL certified 787 Series EPSITRON-PRO-Power Supplies are UL and cUL Certified and process power peaks in systems with high-output requirements. The 1- and 3-phase primary switch mode PRO units provide 93% efficiency, PowerBoost and TopBoost functions. Select models also provide free configuration and monitoring software and Line Monitor capability.

WAGO http://ept.hotims.com/34481-69

http://ept.hotims.com/34481-67

100W 1/4 brick dc-dc converter shortens time to market

High current, low rDS N-channel MOSFET comes in SOT-23F package CMPDM303NH high current, low rDS(ON), N-Channel MOSFET is available in the industry standard SOT-23F package and provides continuous drain current rating of 3.6A. Device combines onresistance, rDS(ON) of 27milliohms and a very low total gate charge, Qg, of 8.8nC makes it a suitable energy efficient solution for higher current, space constrained applications.

CENTRAL SEMICONDUCTOR http://ept.hotims.com/34481-68

PKM4116ND quarter brick DC/DC converter has been highly optimized to lower the number of components while simultaneously reducing power losses. Enabling systems designers to shorten time-to-market, unit is an industry standard quarter-brick product and is 100% pin-to-pin compatible with similar products in the market.

Product can power radio-applications and is optimized for the new generation of micro cell transmitters requiring a 100W power module with the flexibility to adjust its output voltage within the range 23.8V to 32.8V. ERICSSON POWER MODULES http://ept.hotims.com/34481-70

USB-capable wideband power sensors measure to 40GHz R&S NRP Z85 and R&S NRP Z86 USBcapable power sensors measure power from 50MHz to 40GHz without requiring a base unit. Devices are connected to a PC via a USB interface and displays envelope power over a range of 47dBm to +20dBm. Products provide high-precision continuous-average measurements over the entire dynamic range from 60dBm to +20dBm. ROHDE-SCHWARZ http://ept.hotims.com/34481-71

newswatch

World battery demand to reach $109-billion

http://ept.hotims.com/34481-11

Global primary and secondary battery demand is forecast to climb 4.8 percent per year to $109 billion by 2014, according to the World Batteries report, published by The Freedonia Group Inc., Cleveland-based industry market research firm.

China will remain the world’s largest national battery market by far, as the country’s position as a global leader in portable electronics production supports an $11.5-billion increase in battery demand from 2009 to 2014.

India will register the strongest sales growth of any national market, supported by healthy increases in manufacturing activity, personal consumption expenditures and motor vehicles in use. Gains will also be strong in a number of smaller countries with developing economies. Battery demand in the developed areas of the US, Japan and Western Europe is projected to increase at rates below global averages through 2014, but economic recovery in these areas will support a $4.7 billion overall increase in battery sales.

Non-lead-acid secondary battery demand increases will outpace sales of primary and lead-acid secondary batteries through 2014. The market for lithium ion and lithium polymer batteries and, to a lesser extent, nickel-metal hydride batteries will be spurred by the immense popularity of portable electronic devices such as cell phones, digital audio players, gaming systems and laptops. The rapid growth in hybrid vehicle production will also boost demand for these batteries.

full online product listings at ept.hotims.com

http://ept.hotims.com/34481-12

14

power supplies/medical applications

electronic products and technology • march-april 2011

Power supplies benefit from multiple safety At a time when the investment costs to develop new power supplies are soaring, and as manufacturers adopt new technologies like digital control to meet new green energy requirements, a new trend is emerging in safety certifications with benefits for both the manufacturer and user alike.

certifications

By David Norton, vice-president marketing, TDK-Lambda

IEC standards

• Distributors do not have to stock two versions (one for medPreviously ‘Medical’ power supplies ical and the others for commerwere solely certified to IEC 60601-1 and cial/industrial apps), and can users were limited to just a few specialallocate inventory accordingly, ized product lines. Recently though, the stocking higher quantities, leadtrend has been to also obtain certificaing to better availability of tions to the (ITE) IEC 60950-1 standards power products. in addition to the medical certifications, • Having the product designed which greatly broadens the markets in for multiple applications often leads to which these power supplies can be used. additional features being designed into IEC (International Electrotechnical the product series, allowing engineers to Commission) is a non-governmental orgaenhance their system feature-set. nization that prepares and publishes a • Because medical applications require vast range of standards covering many lower earth leakage currents, now referred industries and applications. to as ’Touch Current’ and ‘Protective These IEC standards are then adopted Conductor Current’, non-medical customby the certification bodies like UL, CSA ers also reap this benefit. and TUV, who will test and certify to UL 60950-1, CSA 22.2 No 60950-1 and EN • Since medical power supplies have rein60950-1. forced insulation, with input to output isolation of up to 4,000Vac (compared Multiple certifications benefit to 3,000Vac), industrial users can enjoy customers in several ways: a greater design margin. This is also true of output to ground isolation where a ‘BF’ • The primary benefit is that a product rated medical supply can have 1500Vac series now has a much wider range of isolation. applications, and hence higher manufacturing volumes which drive down costs.

• The temperature range of an industrial The Return-On-Investment (ROI) for the power supply is often much greater than also improved, leading12:01 to of a 1medical application, again givEP&Tmanufacturer Marbles+QFis 3-2011 1/31/11 PMthatPage more product development investments. ing a greater design margin.

Model SWS1000L

Model EFE300M

• Many medical supplies have two input fuses, one for the line and one for the neutral. Industrial users can benefit from this when connecting across phase to phase with a 208Vac input.

Examples of dual certification power supplies from TDK-Lambda Model SWS1000L 1000W power supply comes with IEC 60601-1 and IEC 60950-1 certifications and is available with output voltages from 3.3V to 60V. The unit’s features include remote on/off, current share for paralleling, dc ‘Good’ and ‘fan fail’ signals, a 12V auxiliary output and variable speed fans for lower acoustic noise. An additional programming pin is available allowing the output voltage to be varied from 20% up to 110% of the nominal output voltage. Product is designed for multiple applications; the series also has a very wide temperature range from -40C to +74C.

Model EFE300M power supply is a 300W rated series with a 400W peak power capability, using digital control with an internal micro-controller to enhance reliability and reduce losses. Efficiency is typically 90%. These products are very compact, being only 3 x 6 inch in size, and come with UL, CSA & EN certifications to ITE 60950-1 and Medical 60601-1. In addition to remote on/off, a standby voltage and dc ‘Good’ signal, the series provides an internal ORing FET for redundant/fault-tolerant applications.

The EFE series is available in an open frame, U channel or enclosed with an internal temperature-controlled fan.

For more information on safety certifications for power supplies from TDK-Lambda, go to http://ept.hotims.com/34481-72

Cool Regulated Power Readily available converter solutions RBC 17

UCE

 Outstanding thermal derating  Industry standard packages  High efficiency  Excellent power density Series

Package Power

Output Voltage

Data Sheet

HPQ-12

1/4 Brick

300W

12Vout

murata-ps.com/hpq-12

RBC 17

1/4 Brick

200W

12Vout

murata-ps.com/rbc

• Panel Hardware • Terminal Boards

UCE

1/8 Brick to 120W

12Vout

murata-ps.com/uce

• Pins, Plugs, Jacks & Sockets

UCQ

1/4 Brick

100W

12Vout

murata-ps.com/ucq

ULQ

1/4 Brick

120W

12Vout

murata-ps.com/ulq

Our Catalog M55 also includes: • Battery Clips, Contacts & Holders • Fuse Clips & Holders • Spacers & Standoffs • Terminals & Test Points • PC Board Hardware

• Multi-Purpose Hardware Call or Click for Catalog M55

And we have available stock.

How cool is that!

Engineering Services Available RoHS Compliant

~ ISO 9001 Certified

EMX Enterprises Ltd Vancouver • Toronto • Montreal Tel: (905) 764-0040 • 1-800-268-6822 Web: www.emx.ca • e-mail: sales@emx.ca

®

UL Recognized Quick-Fit Terminals

HPQ-12

ULQ

UCQ

murata-ps.com

Available from our global distributor network

http://ept.hotims.com/34481-13

http://ept.hotims.com/34481-14

EPT_HP_Island_Feb_11-CoolGreen.indd 1

15/02/2011 10:53:42

full online product listings at ept.hotims.com

POWER BY DESIGN

Custom power solutions designed to fit your specific needs

Vicor Custom Power: Small company responsiveness, large company resources The sole focus of Vicor Custom Power is designing and manufacturing turnkey custom power systems that meet your specific needs. Vicor Custom Power maintains the flexibility of a small entrepreneurial company while taking advantage of Vicor’s technical and business resources to deal effectively with your most challenging power requirements. Vicor has invested in the tools and resources to offer you full service solutions from prototype to mass production with the shortest lead times and the lowest risk.

General Capabilities: • Electrical and Mechanical Design • Rapid Prototyping • High Volume Production Capacity

Put Vicor Custom Power to work for you

• MIL-STDs Compliance

today, call 1-800-496-5570 to speak with

• Reliability / Certification Testing:

High Temperature Operational Life HALT (Highly Accelerated Life Test) Mechanical / Thermal Shock Vibration Humidity Acceleration Altitude

http://ept.hotims.com/34481-15

Explosive Atmosphere Temperature Cycling Burn In EMI Transient Immunity

a Vicor Custom Power engineer, or email apps@vicorcustom.com

vicorcustom.com

16

power supplies/medical applications

electronic products and technology • march-april 2011

Ac source delivers built-in power analyzer functions 61500 Series programmable ac power sources provide high performance ac sources with power analyzer functions built-in. Units meet these requirements by providing the ability to simulate various ac line input conditions and measurement of critical characteristic for products under test.

Developed using advanced PWM technology, product operates with singlephase & three-phase output.

CHROMA SYSTEMS SOLUTIONS

60V synchronous step-down dc-dc controller specified up to 150C LTC3810H-5 high input voltage synchronous step-down dc-dc controller provides guaranteed specifications for junction temperatures as high as 150C. Device employs constant on-time valley current-mode control architecture, delivering very low duty cycles and extremely fast transient response with accurate cycle-by-cycle current limit without requiring a sense resistor. The rugged device can directly step down voltages from 60V to an output voltage ranging from 0.8V to 93% of VIN. The powerful 1 Ohm onboard gate drivers minimize switching losses associated with driving N-channel MOSFETs at high frequency and high voltage for output currents up to 25A. LINEAR TECHNOOGY

http://ept.hotims.com/34481-73

150Watt medical power supply operates in convection-cooled U-frame

http://ept.hotims.com/34481-79

MPM-815H Series of ATX 12V.0 compliant U-frame switchers provides convection cooled operation for medical and patient-care equipment. Product provides universal ac input with active power factor correction; Five ATX output voltages of 3.3 / 5 / 12 / -12 / 5VSB; up to 90 Watts max combined 3.3 and 5V rails. Unit measures 7.79 x 3.82 x 1.59" and are safety approved UL/cUL60601-1 / EN60601-1 / CE Mark (LVD) for use in medical applications with Class B Emissions.

ADVANCED POWER SOLUTIONS http://ept.hotims.com/34481-74

LDOs extend battery life 150mA AP7312 and 300mA AP7332 dual fixed output linear regulators LDOs, exhibit respective dropouts of 150mV and 300mV and typical quiescent current ratings of only 60µA. To enable full use of battery capacity down to 2V and to provide additional headroom for 5V sources, device’s input voltage spectrum is wide, at 2V to a maximum of 6V. Dual output devices provide designers with an extensive choice of 13 different fixed output voltage combinations, from 1.0V/1.0V through to 3.3V/3.3V. DIODES INC. http://ept.hotims.com/34481-75

LED driver outputs ac-dc single 16.8W LD015D Series ac-dc constant current LED driver power supply are fully potted and suitable for dry and damp locations. Devices are UL1310 Class 2 Safety Standards (110Vac) or CE compliant (230Vac). Product includes input voltage 110Vac or 230Vac, dc output ranges from 8 to 48Vdc and wide selection of preadjusted constant current outputs.

Operating temperature range of -20C to +60C, phase dimmable, compatible with standard triac and electronic low voltage dimmers and are up to 82% efficient typical.

POWER SOURCES UNLIMITED http://ept.hotims.com/34481-80

4 x 5mm integrated POL voltage regulators reduce footprint SupIRBuck integrated point-of-load (POL) voltage regulators in a compact 4 x 5mm package provide the same efficiency and functionality as previous generation devices in a 33% smaller footprint. Models IR38(53)(56)(59) devices integrate a high performance controller with latest generation MOSFETs deliver 4 A, 6 A and 9 A output current respectively to achieve more than 96% peak efficiency. Device provide over-voltage protection, an external synchronization option to reduce noise and EMI in multi-rail systems, true output voltage sensing option for adjustable PGOOD, and OV threshold setting.

INTERNATIONAL RECTIFIER http://ept.hotims.com/34481-81

High-voltage power MOSFET reduces losses to 52% RJK60S5DPK high-voltage N-channel power metal-oxidesemiconductor field-effect-transistor (MOSFET) for power supply units, delivers high efficiency. Device is ideal for use in the primary power switching circuit of a power supply unit, which converts alternating current (ac) to direct current (dc).

Product employs a high-precision super junction structure to achieve a figure of merit (FOM), a key overall performance index for power MOSFET devices, which is approximately 90% improved from firm’s existing products.

RENESAS ELECTRONICS http://ept.hotims.com/34481-76

LED drivers serve as drop-in replacements for CCFL inverters

15 Watt chassis mount encapsulated ac-dc power supply

Series of LED driver boards come in new package configurations that provide footprint-compatibility with their existing CCFL inverter designs - in the same form factor as dc-ac inverters already in the field. These drop-in replacements allow for a fast, easy upgrade to LED lighting without re-designing or re-tooling the mounting hardware. Products are pin-forpin compatible with the inverters and have the same length and width dimensions as their counterparts as well as matching mounting holes.

ENDICOTT RESEARCH

PC15 Series of ac-dc switching power supplies provides 15 Watts of output power in an encapsulated case. The optional Din-Rail mount and easily accessible terminal blocks give it the versatility to be used as a power solution in a large assortment of applications. Device operates from a standard 85 to 265Vac at 47 to 440Hz. Single output models are available with outputs from 5Vdc to 48Vdc. CONTECH

http://ept.hotims.com/34481-77

http://ept.hotims.com/34481-78

1W dc-dc converter boosts efficiency, lowers min load AM1D-RZ series of 1 watt power supplies includes 80 models with efficiency rates as high as 89% and load regulation of 6%. Input voltages of 5, 12, 24 and 48Vdc convert to single and dual output voltages of ±5, ±9, ±12 and ±15 VDC with momentary(1 sec) short circuit protection.

Operating within an ambient temperature range of -40C to 85C at full load without derating, product series comes with I/O isolation of 1000Vdc or 3000Vdc with load regulation of 6% and low ripple and noise of typically 50mV p-p.

AIMTEC http://ept.hotims.com/34481-82

Commercial Silicon Carbide Power MOSFET delivers 1200V blocking voltage CMF20120D SiC MOSFET provides blocking voltages up to 1200V with an on-state resistance (RDSon) of just 80m at 25C. Device’s RDSon remains below 100milli-ohms across its entire operating temperature range.

Tests demonstrate the lowe gate drive energy (QG <100nC) across the recommended input voltage range. Conduction losses were minimized with forward drop (VF) of <2V at a current of 20A. CREE http://ept.hotims.com/34481-83

Power MOSFET lowers on-resistance to 16m+A6kModel SiA427DJ 8 V p-channel TrenchFET power MOSFET provides low on-resistance in a thermally enhanced PowerPAK SC-70 2 mm by 2 mm footprint area. Device provides an ultra-low on-resistance of 16mΩ at 4.5V, 26mΩ at 1.8V, 32mΩ at 1.5V and 95mΩ at 1.2V. Device can handle 40 % more power dissipation under the same ambient conditions, compared with a typical device in the standard SC-70 package.

VISHAY INTERTECHNOLOGY

http://ept.hotims.com/34481-84

DIN-rail mount dc-dc converters operate with 12V, 24V, 48V inputs DPX Series DIN-rail mount 40-60W dc-dc converters operate with 12V, 24V and 48V inputs. Units come with both 2:1 and 4:1 input voltage ranges covering from 9.5V to 75V, with 40 to 60W output ratings. Products are available with single, dual or triple outputs. The single output models are available with an output voltage of 5V, 12V or 15V and the dualoutput models have 12V or 15V outputs. The triple-output models provide a main with either 12V or 15V outputs.

Units come in a rugged metal case and can be mounted on either a TS35/7.5 or TS35/15 standard DIN rail.

TDK-LAMBDA AMERICAS http://ept.hotims.com/34481-85

http://ept.hotims.com/34481-16

full online product listings at ept.hotims.com

Accelerating the Speed of Design. ™

Your one solution for design creation.

Avnet Memec focuses on a select group of leading suppliers to provide original equipment manufacturers (OEMs) a high level of technical expertise — enabling the swift and accurate design of leading-edge products.

With factory trained and certified support, Avnet Memec specialists offer a level of technical depth unmatched in the industry. With easy access to our industry experts, your projects move forward with greater velocity, driven by in-depth technical expertise. That translates into faster time to market for you, with greater ease and confidence. From Design to Delivery.™ Avnet is ranked Best-in-Class* for online seminars, technology education and training, design & engineering services, knowledgeable application engineers and our online 24-hour design support – proof that we consistently deliver:

> Proactive engineering support > Factory certified FAEs Accelerate Time to Market.™ Visit the Avnet Design Resource Center™ at: www.em.avnet.com/drc

1 800 332 8638 www.em.avnet.com Follow us on Twitter!

*As rated by Hearst Electronics Group: The Supplier Interface Study, 2007. ©Avnet, Inc. 2011. All rights reserved. AVNET is a registered trademark of Avnet, Inc.

www.twitter.com/avnetdesignwire http://ept.hotims.com/34481-17

18

electronic products and technology • march-april 2011

Environmental Design / Green Tech

RoHS recast approved

by European parliament

by Claigan Environmental Inc., Kanata ON

Towards the end of 2010, the parliament of the European Union voted to adopt the new RoHS Directive, which now includes a much larger scope of products. The recast ‘Restriction of the use of certain hazardous substances in electrical and electronic equipment directive’ now involves a process for the addition of new restricted materials, more stringent enforcement and recall regimes and adoption of the CE mark. Some of the new itemsEP&T_Solar_Mar2011.pdf include medical devices monitoring and control equipment.

2/17/2011 1:18:24and PM

The principle changes from the RoHS Directive (2002/95/EC) • Repeal of original RoHS Directive • Increase and clarification of products under scope • New process for exemptions • Recognition of and coordination with REACH Regulation (EC - No 1907/2006) • “Producer” definition replaced with standard importer and manufacturer definitions • Process for increasing scope of restricted materials • Adoption of CE marking • Declaration of Conformity • New enforcement, documentation,

2011 Is The Year Of Renewable Energy Make it a Powerful One with a Trusted Partner

Electro Sonic has helped build Canada’s Energy Infrastructure for nearly six decades. Whether you are re-designing the grid or creating the future, we deliver solutions with our industry leading partners:

C

M

Y

CM

MY

CY

CMY

K

NERGY SOLUTIONS Solar Wind Hydro Bio Mass Hydrogen Natural Gas

Agilent Technologies Alpha Wire Amphenol Brady Enersys Ferraz Shawmut/Mersen Hammond Manufacturing Hammond Power Solutions Henkel/Loctite Hoffman Honeywell Kemet Kester Microchip Omron Panduit SolaHD Tyco Electronics Vishay Weidmüller

test + measurement wire + cable + cable protection connectors identification solutions batteries circuit protection enclosures transformers adhesives enclosures sensors + switches capacitors solder + solder flux semiconductors + development tools automation + relays + switches connectors + cable management power supplies connectors + relays + cable protection discrete semiconductors + passive components communication + terminal blocks

What’s New Ontario Compliant for FIT and MicroFIT Applications from a Supplier that has been here all along. www.e-sonic.com/whatsnew/Solar.htm

800.56.SONIC energy@e-sonic.com

recall, and authority notification requirements • Appointment of an authorized representative • New timelines

Repeal of original RoHS directive RoHS recast will not be an addendum or addition to the current RoHS Directive.

When the new RoHS Directive comes into force it will be the only RoHS Directive.

Any definitions or requirements of the original RoHS Directive will be void and the only requirements will be those contained in the RoHS Recast. Meanwhile, until the new RoHS Directive comes into force, the current RoHS Directive will continue to be valid.

As expected, RoHS recast has added medical devices, and control & monitoring equipment to the scope of RoHS. Both medical devices and control & monitoring equipment were split into two groups for entry into scope of the RoHS Directive.

Medical equipment will be required to be RoHS compliant three years after entry into force of RoHS recast (as early as January 2014). In-vitro medical devices will be required to be RoHS compliant five years after entry into force of RoHS recast (as early as January 2016). Monitoring and control equipment will be required to be RoHS compliant three years after entry into force of RoHS recast (as early as January 2014). Industrial monitoring and control equipment will be required to be RoHS compliant six years after entry into force of RoHS recast (as early as January 2017).

An 11th equipment category was added to the RoHS directive. The new category handles Electrical and Electronic Equipment (EEE) not covered under the previous 10 RoHS and WEEE categories.

EEE that fall under the group 11 ‘miscellaneous’ category are included in the scope of RoHS recast. The original RoHS directive used the complicated term of ‘producer’ to identify who was responsible for RoHS compliance. RoHS recast does away with the term ‘producer’ and uses more specific terms and requirements for manufacturers, importers, and distributors. These terms are more consistent with other CE marking directives.

One of the compromises required to pass RoHS recast was the removal of Hexabromocyclododecane (HBCDD), Bis (2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP) and Dibutylphthalate (DBP). These substances were included for restriction in previous drafts of RoHS recast, but were removed from the final text. Instead a process for adding new substances to RoHS recast was added with these substances being prioritized for review for addition. Unlike the original RoHS directive, new substances can be added to the RoHS recast without creating new legislation.

RoHS recast, like most single market directives, has adopted CE marking for declaration of conformity to EU regulations. RoHS recast contains standard CE requirements for marking of the product, declaration of conformity, and sanctions for improper use.

To be consistent with other CE marking directives, RoHS recast has the standard declaration of conformity requirements.

The declaration format is specified in Annex VI of RoHS recast. Additional information, beyond the declaration of conformity, can be requested by competent authorities.

RoHS recast is far more specific on documentation, recall and notification of the authorities than the original RoHS directive. Upon a reasoned request, manufacturers and importers must provide continued on page 20

http://ept.hotims.com/34481-18

full online product listings at ept.hotims.com

Stay protected...

SOT-953 package

1.05mm x 1.05mm x 0.5mm

• Utilizes 61% less board space (compared with 4 SOD-923 devices)

• 12V, 18W, 8kV ESD protection (HBM) • Low capacitance/low leakage

with Central’s broad range of TVS products.

Why do discriminating designers select Central Semiconductor’s TVS products?

Today’s sophisticated electronic components and systems are susceptible to damage induced by electrical energy surges. Potentially destructive surges have many sources such as lightning strikes, inductive load switching or electrostatic discharge caused by human contact. Whatever the source, Central Semiconductor has a transient voltage suppressor (TVS) to prevent critical damage.

Portfolio: A broad range of power ratings and package alternatives Technology: Low capacitance options for today’s high speed data line applications

12V, Quad TVS Array 5.6V, Quad TVS Array 6.8V, Quad TVS Array

Request your samples today

SOT-953

200W

CMNTVS12V * CMNTVS5V6 *CMNTVS6V8 CMF5.0A Series

Uni-Polar, 5V - 170V

600W

Description

Ease of doing business: Product sampling, design kits and sales engineering support

Package Type

1SMB5.0A Series 1SMB5.0CA Series P6SMB6.8A Series P6SMB6.8CA Series

Uni-Polar, 5V - 170V Bi-Polar, 5V - 170V Uni-Polar, 6.8V - 250V Bi-Polar, 6.8V - 250V

SMB

1500W

Central Semiconductor Part Number

1SMC5.0A Series 1SMC5.0CA Series 1.5SMC6.8A Series 1.5SMC6.8CA Series

Uni-Polar, 5V - 170V Bi-Polar, 5V - 170V Uni-Polar, 6.8V - 220V Bi-Polar, 6.8V - 220V

SMC

3000W

Peak Pulse Power

18W

TVS devices manufactured by Central™

3SMC5.0A Series 3SMC5.0CA Series

Uni-Polar, 5V - 170V Bi-Polar, 5V - 170V

SOD-123F

Call 631-435-1110 or visit: www.centralsemi.com/tvs8

SMC *Please call

Represented in Canada by:

Optimum Components Inc.: Toronto & Surrounding Areas: tel: (905) 477-9393 • email: mikep@optimumcomponents.com Montreal/Ottawa/Quebec City: tel: (514) 426-1114 • email: peterr@optimumcomponents.com

http://ept.hotims.com/34481-19

Duerfeldt Engineering: British Columbia: tel: (888) 620-3552 • email: vicki@duerfeldtengineering.com • email: phil@duerfeldtengineering.com

Small Signal Transistors TVS

Bipolar Power Transistors

Rectifiers

Thyristors

Energy Efficient Devices Transient Voltage Suppressors

MDMs MOSFETs

www.centralsemi.com

145 Adams Avenue, Hauppauge, NY 11788 USA • Tel: (631) 435-1110

20

environmental design / green tech

electronic products and technology • march-april 2011

RoHS recast approved

Electro Sonic aims to tap

continued from page 18

competent authorities with all the information and documentation necessary to demonstrate the conformity of the EEE, in a language which can be easily understood by that authority. Manufacturers and importers shall cooperate with that authority, at its request, on any action taken to ensure compliance with the provisions of this Directive for EEE that they have placed on the market.

Manufacturers must keep the technical documentation and the EC declaration of conformity for 10 years after the EEE has been placed on the market, ensure that procedures are in place for series production to remain in conformity and ensure changes in product design or characteristics shall be adequately taken into account.

Manufacturers and importers must keep a register of non-conforming EEE and product recalls and keep distributors informed. Manufacturers, importers and distributors who consider or have reason to believe that an EEE which they have placed on the market is not in conformity with this Directive must immediately take the necessary corrective measures to bring that EEE into conformity, to withdraw it or recall it, and immediately inform the competent national authorities of the Member States.

The registration, recall, and mandatory informing of authorities of non-conforming EEE are significant changes in the model of enforcement in RoHS recast from the original RoHS Directive.

New Timelines RoHS recast does not enter into force until the 20th day after publication in the Official Journal of the EU. Publication

may be as early as end of 2010 with entry of force in January 2011. Some projections push the publication date back to late first quarter 2011. The principle elements will not have the force of law on companies or individuals until written into national law by the individual member states (no later than July 2012 based on a January 2011 entry into force of the new directive).

The inclusion of medical devices, invitro medical devices, monitoring and control equipment, and industrial monitoring and control equipment will be three, five, three, and six years respectively from the entry into force of the new RoHS Directive.

Conclusion RoHS recast provides plenty of factors for companies to digest. None of the new timelines are particularly aggressive, but the improved and expanded enforcement, recall, and notification of national authorities’ provisions should increase the attention provided to RoHS by companies currently and soon to be under scope.

It should be noted that the new RoHS directive’s attention to the REACH Regulation further substantiates the EU’s commitment to the REACH regulation.

It would be foolish, at this time, for companies in the electronics industry not to give proper attention to the SVHC requirement of the REACH Regulation.

For more information on compliance solutions for environmental and safety regulations from Claigan Environmental Inc., go to http://ept.hotims.com/34481-106

solar ‘boom’ in Ontario

By Rocco Laricchia P.Eng, technical marketing manager, Electro Sonic Inc.

The Ontario government wants to be a leader in the global renewable energy race. And, as the Green Energy Act calls for renewable energy to replace coal and natural gas power plants, ClearSky Advisors have predicted that the solar PV (photovoltaic) industry will create approximately 70,000 new jobs and attract approximately $7.8B US in private capital over the next five years.

Feed In Tariff or FIT, is a globally accepted incentive program that pays businesses, educational institutes, land developers and residential owners to build and maintain an energy generation facility and sell the power to their local distribution company (LDC), such as Toronto Hydro, Mississauga Hydro, etc. The Ontario Power Authority (OPA) is offering up to 80.2 cents per kilowatthour for rooftop installations less than 10kW (known as MicroFIT) with guaranteed 20 year contracts. Larger projects, up to 10MW, fall under the FIT program.

Optimally, power is generated as close as possible to where it is used to minimize transmission losses, and in Ontario the greatest demand is in the GTA. Large solar farms like those found in southwestern and eastern Ontario are unlikely in the GTA due to expensive land but there is another solution: thousands of commercial and residential rooftops. Just like in Germany, the global solar PV leader where 80% of their 9,000MW of solar generation is from rooftop installations, this will eventually be the backbone of success for Ontario’s solar program.

Already there are over 20,000 MicroFIT

applications in the approval process with the OPA. Approximately 10,000 have been approved, yet only approximately 1,000 have been installed.

As winter comes to a close in 2011, we will begin to notice a drastic change in the landscape of Ontario, as thousands of solar installations take place in Ontario.

Electro Sonic Inc. has identified that many independent electrical contractors and roofing professionals see an opportunity to expand their business and participate as a PV installer for smaller residential and commercial rooftop installations from 1kw to 100KW. In 2010, Ontario has surpassed New Jersey as the second largest photovoltaic generating market second only to the mature California market.

Projections for 2011 predict that Ontario will rival California in the number of new installations measured in Mega Watts.

There are currently not enough skilled PV installers in Ontario to support such a rapid growth and Electro Sonic has positioned itself as a one-stop-shop for top quality solar components, as well as Ontario compliant pre-engineered installation kits designed to perform optimally in Ontario’s harsh environment.

These components and kits will allow many independent contractors the ability to quote and install PV solutions quickly with minimal understanding of the complex knowledge required to engineer a total solution. As the residential market grows, these independent installers will provide up to 80% of all new installations in Ontario.

For more information contact Electro Sonic Inc. or go to: http://ept.hotims.com/34481-107

The finest line of workstations ever assembled.

Lista workstations for electronic and assembly operations can be configured for maximum productivity.

Lista workstations are designed to let you configure and reconfigure quickly and easily. Maximum flexibility and productivity – go configure!

COMPLIMENTARY DESIGN SERVICES Need a custom solution to precisely fit your unique space and usage requirements?

Register at www.listaintl.com/ListaWorks10 or call 800-722-3020 for your free ListaWorks™ survey and design.

http://ept.hotims.com/34481-20

http://ept.hotims.com/34481-21

full online product listings at ept.hotims.com

Custom Electronic

ENCLOSURES Built in 2-3 days!

CUSTOMER EXPERIENCE: Astronics AES Test Lab Builds Better Equipment With Less Work Dewey Colvin is an electrical engineer with over 20 years of experience in avionics. He runs the System Integration Lab at Astronics AES, a Redmond, Washington based subsidiary of Astronics Corporation. Astronics AES is a leader in custom rugged and reliable electrical power systems for commercial and military aircraft, as well as missiles.

Mr. Colvin’s lab provides an environment that simulates the conditions found on real aircraft, in order to check out and test the company’s products. As one might expect, rigorous testing is especially important for aircraft power systems, as electrical power is essential for keeping aircraft flying and keeping passengers and crew safe.

Like most testing laboratories, they heavily depend on custom built test equipment, and as a result, designing and building this gear (and the enclosures in which it is housed) forms an important part of their work. The devices they build are almost exclusively low-volume, and often unique one-offs. Before working with Protocase, Mr. Colvin and his staff relied on local sheet metal shops to build their custom enclosures. But these shops were usually less than enthusiastic about such small jobs, and had cumbersome coordination of drawings and information from his electronics-oriented staff. Their lead times varied dramatically, and they also lacked finishing touch capabilities, such as silkscreening and painting. As a result, Mr. Colvin’s staff found themselves doing more work to get less-than optimal results. For example, staff usually ended up doing things like hand-applying adhesive labels on front panels, giving results which, although functional, were somewhat home-made looking.

Recently, Mr. Colvin and his staff began to use Protocase Designer® 3D custom enclosure design software. This free CAD software allows users to quickly and easily design custom enclosures (including cutouts, fasteners, and silkscreens), get instant online price quotations, and then have their design manufactured in 2-3 days. According to Mr. Colvin, “Protocase Designer is a simple tool that is very easy to use. We have plenty of access to full-featured CAD software like Solidworks, but my staff is trained in electronics, and these fully featured mechanical design packages have steep learning curves. Protocase Designer is so easy to use that my staff can be up and designing electronics enclosures right away. Its speed of design, and online price quotations allow us to work through design iterations, and optimize for cost, in a way that we never could before.”

Mr. Colvin says that working with Protocase has had a positive impact on his lab. “We now have easy access to fully finished enclosures, with quality powdercoat and silkscreen, even at one-off quantities. As a result, our equipment racks look more professional. This has a positive impact during customer visits, both in the way customers view us, and in the confidence that they have in our capabilities. And the best part is, we spend fewer man-hours getting there.”

One-stop Shopping

We build fully finished enclosures to your design, in your choice of steel, aluminum, stainless or galvanized, including cutouts, powder coats, silkscreens, fasteners, and hardware.

Built in 2-3 days

We offer unheard-of manufacturing speed. This lets you complete your electronics before you finalize your enclosure design. This greatly reduces painful and time consuming rework.

No minimum Orders

We’re here to help our customers get their jobs done, so we’ll give your order the same priority and respect whether it’s a single enclosure or a one-off project, or a production run of thousands.

Also Available The fastest and easiest way to design, price and build custom electronics enclosures.

Free Downloadable 3D Enclosure Design Software Fast and Easy Design Instant Price Quotes Buy Your Custom Enclosure Online With 2 - 3 Day Turnaround

www.protocasedesigner.com

Protocase allows you to buy custom electronics enclosures with a whole new level of speed and convenience.

Our friendly and knowledgeable sales representatives will be happy to assist you in placing your order.

P R O TO C A S E

Custom Electronic Enclosures For Engineers & Designers

http://ept.hotims.com/34481-22

www.protocase.com info@protocase.com 1.866.489.3911

22

west tech report

electronic products and technology • march-april 2011

WebTech Wireless succeeds through innovation New West Tech Columnist For my first West Tech Report, EP&T welcomes Sohail Kamal, I would like to focus on WebTech BBA, as the newly appointed Wireless Inc., a Burnaby BC-based columnist and reporter for West company that develops excit- Tech Report. A freelance maring technologies that integrates keting writer who believes in BC real time technology and mobile and Canada’s ability to innovate resources. and compete in the global market, Sohail Kamal In the past, British Columbia will deliver a frequent column space aimed at has been home to many pioneer- delivering news and trends, as well as interviews ing technology companies such as that highlight notable or emerging companies Squirrel Systems, Creo and Ballard responsible for driving BC’s electronics and techPower Systems. Squirrel Systems nology community. achieved success by becoming the San Francisco-based NextBus. InterFleet first to market an integrated touch screen launched in 1998 and has grown to terminal for restaurant order managebecome one of North America’s leading ment. WebTech Wireless is one of the providers of location-based services and Province’s GPS success stories, whose telematics systems for government fleets, fleet management solutions integrate including Emergency Medical Services GPS, wireless communications and the (EMS) vehicles. NextBus is a transit soluInternet to provide real-time information tion that provides real-time, predictive about the location and status of vehicles bus arrival information for passenger, and and mobile resources. has done so with positive reviews.

In an interview with Eric Wilson, There is an interesting story in marketing manager at WebTech Wireless, Directions Magazine that puts this techhe described his firm as the first to nology’s benefit to the average conmarket GPS/GPRS-based vehicle location sumer into perspective: “But, then there’s and telematics services. Wilson introNextBus. Not one, but two different peoduced the flagship product, Quadrant, a ple in my life have told me with a totally technology that provides fleet managers straight face that this website, about with real-time and historical data to effiwhich I had told them, has ‘changed their ciently plan routes, update maintenance lives’... Now that it’s 17-degrees outside, schedules, track work times and fuel we smile more as we walk determinedly consumption. With the increasing focus from the library or work or the bar just on environmental harm reduction and in time to catch the bus. Life is good...” regulatory compliance, this technology’s EP&T would not endorse NextBus over ability to significantly reduce fuel conany competition without careful review of sumption and resulting CO2 emissions has all products available, but it’s hard to argue made it a great tool for fleet managers. with an integrated app that helps a perDriven by its recent successes, WebTech son get home quickly on a cold Canadian Wireless is growing. Less than a year and winter evening. GPS verified arrival times a half ago, the firm acquired two subare made available over the Internet, via sidiaries, Toronto-based InterFleet and

mobile devices and cell phones and at electronic signs at specific bus stops.

Adding to its street cred, WebTech Wireless was recognized in 2010 among the Deloitte Technology Fast 500, as one of the fastest growing technology companies in Canada.

CES Musings The recent Consumer Electronics Show (CES) presented a look into the future of electronics, held in Las Vegas this

past January. Walking past the glittering hotels and casinos and you are bombarded by never ending lights and sounds.

Amongst the biggest trends at the 2011 show were mobile Internet tablets. In years past, the biggest news included mobile phones and companies that were integrating new technologies with these handheld devices.

You can reach the author by email at: sohailkml@gmail.com

products on review

Entry-level mixed-signal oscilloscope joins launch of integrated function generator Mixed-signal and digital-storage oscilloscope portfolio expands with 26 new models that comprise its next-generation InfiniiVision 2000 and 3000 X-Series. Model InfiniiVision 2000 X- Series provides bandwidths from 70MHz to 200MHz and boasts the fastest waveform update rate in its class for superior viewing of signal detail and capture of infrequent events.

Model InfiniiVision 3000 X-Series scopes enhance performance and provide bandwidths from 100MHz to 500MHz, while waveform update rates of 1,000,000 waveforms per second. Options include a 16-channel MSO, an integrated function generator, and hardwareaccelerated serial protocol decode.

AGILENT TECHNOLOGIES http://ept.hotims.com/34481-145

Signal analyzer doubles acquisition bandwidth RSA5000 Series Signal Analyzer provides more than double the currently available acquisition bandwidth and improves real time capabilities.

Providing advanced time, amplitude and DPX trigger functions combined with swept DPX, unit delivers discovery and capture of these intermittent and rapidly changing signals and up to 85MHz bandwidth, now covering the entire ISM band where common technologies are used, such as, Bluetooth, Zigbee, RFID, and Wireless LAN. TEKTRONIX http://ept.hotims.com/34481-146

Surge-trap SPD line extends UL approvals

Panel antenna improves directional communication

Surge-Trap Type 1 X-Series of UL 1449 third edition approved surge protection devices (SPDs) provide overvoltage protection for most locations in the facility with the smallest footprints available.

Products include TPMOV technology inside and are rated for NEMA 4X enclosures and suited for system voltages from 120V to 600V. They have a 20kA (In) nominal discharge current and high 200kA SCCR ratings.

MERSEN

PN Series of panel mount antennas assist long-distance directional communication among wireless links. Device provides 16dBi gain and 23-degree horizontal, 23-degree vertical directivity, increasing the range and reliability of wireless links. Sleek unit is rugged and fully weatherized, making the antenna equally suited for indoor or outdoor applications. Product includes complete mounting hardware for standard masts.

ANTENNA FACTOR

http://ept.hotims.com/34481-147

http://ept.hotims.com/34481-148

Signal calibrator improves accuracy Martel Electronics family of five multi-function signal calibrators replace existing designs with improved accuracy, packaging and display technology. Model DMC-1410 documenting multi-function universal calibrator with dual display and isolated readback circuit. Model MC-1210 multi-function universal calibrator provides dual display and isolated readback circuit. Product range also includes the MC-1010 multi-function calibrator, the PTC-8010 temperature calibrator and the PSC-4010 voltage/current calibrator.

TECHNICAL SYSTEMS http://ept.hotims.com/34481-149

Circuit board plotters speed efficiency ProtoMat S-Series circuit board plotters work faster, more efficient and come inside a new modern looking acoustic cabinet and include available upgrade options. All new systems come with a completely redesigned CircuitPro software, aimed at a wider range of users. While inexperienced users are guided step-by-step through the production processes by finely tuned wizards; proficient users can continue using menu functions. Also being introduced is the new ProtoMat® E33 entry-level unit.

LPKF LASER & ELECTRONICS http://ept.hotims.com/34481-150

http://ept.hotims.com/34481-23

full online product listings at.ept.hotims.com

23

electronic products and technology • march-april 2011

Switches & Circuit Protection

Rough environments require appropriate selection of circuit breakers for equipment Features that should be taken into account when selecting an appropriate circuit breaker Actuators suited for rough environments?

Thermal circuit breakers for equipment (CBE) protect engines and equipment against electrical overload and short circuits. Machine tools and construction equipment, for example concrete tampers, high-pressure cleaners, mobile generators, welding equipment and circular saws, require that the circuit breaker is suitable for the demanding operating environment.

Conventional circuit breakers, with push-button operation, have limitations when it comes to these applications; therefore the equipment manufacturers search for solutions of a circuit breaker with the following features: • Operable with gloves • Modular design with 1, 2, 3-pole options • Integrated function of a manual On/ Off • Positive trip-free mechanism • Compact design • Fast and safe connectivity • Wide temperature range • Wide range of current ratings • Customer-specific designs in color, form and labeling • Complete approval from VDE, cURus and CCC Very often industrial gloves are worn for operating machine tools and construction equipment. This means that the appropriate circuit breaker must be able to operate safely and quickly with gloves (Figure 1). In contrast to rocker or pushbutton actuators, which do not guarantee safe and quick operation with gloves, a rotary knob is optimal. As a matter of direct personal safety, it is therefore critical that a circuit breaker can be operated fast and reliably.

Modular design I n c r e a s i n g l y, manufacturers provide modular circuit breaker designs to cover a broad spectrum of applications.

This means that the same type of circuit breakers are available in single, double and triple pole versions, with the capability of being mounted in different panel thicknesses (Figure 2).

A well-developed FIG. 2: Same type of circuit breaker design with different functionality

1 Pole

2 Pole

3 Pole

By Diane Cupples, VP marketing, product management/circuit protection, Schurter Inc.

circuit breaker offers variations in circuit protection, such as 1, 2 or 3-poles to provide flexibility in design. These features accommodate a variety of application specifications.

Can be used as a manual On/Off switch To keep manufacturing costs of the equipment as low as possible, and to reduce the number of components, the ‘On/Off’ switching must be integrated into the overload and short circuit protection.

What is a positive trip-free mechanism?

If the circuit breaker trips due to overload or short circuit, then it must be switched manually to reset. With a positive trip-free mechanism the circuit breaker is designed mechanically in such a way that it cannot be manipulated to prevent the tripping of the circuit breaker, even with the use of adhesive tape or makeshift devices. Consequently, the positive trip-free mechanism cannot automatically re-switch, and guarantees the best possible protection of the operating personnel and the machine.

Compact design

Following the current megatrend of the electronics industry, namely ‘miniaturization’, circuit breakers too must offer increasingly compact designs. Both of the requirements, including a unit that has the ability to operate with industrial gloves, and one that sports a compact design, appear to be opposite at first glance. However, the differentiation should be made between the actuating feature and the actual circuit breaker package. So, the rotary knob can be resized to enable a safe operation, while the circuit breaker itself remains compact, occupying minimum space in the equipment.

The circuit breaker must provide a method of connection that is quick and safe. Faston terminals avoid tedious soldering when mounting and dismounting the circuit breaker. Making the connections with standard quick-connect terminals is not only fast, but safe.

Additionally, quick connections allow for easy replacement of the unit in the ‘field’.

FIG. 1: Fast and reliable operation even with industrial gloves

FIG. 3: Circuit breaker, customized according to specific equipment requirements

to provide the current variations in the same housing.

Approvals

Customer specific The equipment manufacturer wants to have flexibility in design, and looks for circuit breaker manufacturers who provide various options such as form, color and labeling of the circuit breaker unit.

Only a few manufacturers offer circuit breakers that can be customized according to specific requirements (Figure 3).

A wide range of rated currents ensures a broad spectrum of applications. Rated currents ranging from 0.05A to 20A offer significant advantage in that different equipment, with very low current requirements, can be fitted with the same type of circuit breaker.

However, technically it means that the manufacturer must completely master the manufacturing process of direct and indirect heating of the bimetal, and be able

In a global environment, equipment is manufactured and potentially sold in all five continents. Consequently, this means that you and your equipment must have the appropriate approvals, which can be time consuming and cost intensive.

Equipment manufacturers must look to circuit breaker manufacturers who carry all relevant component level approvals to shorten time-to-market and costs.

Conclusion

A circuit breaker, which is supposed to work safe and reliably even in the roughest environments, must possess the features necessary to meet these demands. The physical requirement of a ‘high temperature range’ for example requires a large and finely tuned range of rated currents. On the other, hand a wide range rated currents is contradictory to compact design. A circuit breaker manufacturer who can fulfill all these requirements, and fulfills the required standards at the same time, must have immense know-how and decades of experience.

For more information on circuit breakers for equipment operating in harsh environments from Schurter Inc., go to http://ept.hotims.com/34481-86

Temperature range There are potentially extreme temperatures, plus or minus in environments where machine tools and construction equipment operate. Construction machines are used at very low temperatures during winter and at very high temperatures during summer. Here the equipment manufacturer requires high reliability over a broad temperature range such as –30C to +60C.

http://ept.hotims.com/34481-24

w w w. e p t . c a

24

switches & circuit protection

electronic products and technology • march-april 2011

Switches, control systems customized for marine apps

Piezo benders range from 10 to 41mm

IEEE handles come in standard, hot-swap versions

Complete range of specialized switches and control systems for marine applications, includes illuminated pushbuttons and indicators, keylocks, selector switches, joysticks, membrane controls and emergency-stops.

Devices are modular and available in stainless steel and aluminum materials. Devices come in a wide range of shapes, mounting styles and colors. IP 65 and IP 67 rated switches are available for use in applications requiring added protection against the penetration of water and other liquids.

EAO

Line of piezo benders range in size from 10mm to 41mm - used to produce sound, as well as pick-up sounds, vibrations and pressure. Device is a Piezo ceramic crystal that is coated with silver on both sides, glued to a brass, nickel alloy or stainless steel disk. Product requires an alternating current to produce sound. When force is applied to the disk a voltage is produced, thus allowing the bender to be used very effectively as a switch. It is very sturdy, long lasting device that can accept a lot of punishment, if properly mounted.

PUI AUDIO

IEEE injector /ejector handles are available in standard, hot-swap, offset and ESD versions.

Products are utilized in various custom and standard architectures, including CompactPCI, VME/VME64x, VXS, and VPX boards. Devices come with or without an ESD pin and a .1” offset per the PICMG 2.11 R1.0 power interface specification. Button mechanism unlocks device’s handle in a two-step latching process.

ELMA ELECTRONIC

http://ept.hotims.com/34481-87

Power rocker switch fits small spaces RL3-8 power rocker switch is a small solution, easily snaping into a panel cut-out of 0.354 x 0.547". Device has UL rating at 6A 125Vac, and Vde rating at 3A 250Vac T125. Fully RoHS compliant, product is made of PA66 nylon, silver alloy contacts and silver plated quick connect terminals. The function is SP On/Off and On/On. PHASEDA LLC http://ept.hotims.com/34481-88

http://ept.hotims.com/34481-89

http://ept.hotims.com/34481-90

Ultra-miniature rocker, toggle switches self-clean G Series process sealed, ultra-miniature rocker and toggle switches with self-cleaning contacts are small in size and of durable construction. Devices are pcb-mounted and feature firm’s Sliding Twin Crossbar (STC) contacts, providing logic-level switching reliability. Devices weigh 25 grams and are process sealed for automated processing techniques, including flux-cleaning procedures. In addition, the STC contacts self-clean with every actuation. Products can be specified in a single or double pole configuration (SPDT or DPDT). Five different circuit combinations are also available, including momentary and maintained options with up to three actuator positions each.

NKK SWITCHES http://ept.hotims.com/34481-91

TA35

Switching and overload protection with a twist

Waterproof cursor, switch function control for instrumentation panels

Compact 1Watt dc-dc converter delivers short circuit protection

Line of rugged industrial pointing devices with a Switch Function Control device have similar form, and same cutout fit of 1.50 x 1.62-inches, while providing different functionality. All devices have the Syn-Proof coated elastomer that protects against harsh chemicals and synthetic oils. The NEMA 4 (IP66) watertight seal prevents ingress of liquids and solids. Illumination is an option with either constant or toggled backlighting, or no backlight.

CTI ELECTRONICS

AM1DS-NZ series of 1 watt power supplies provides continuous short circuit protection with auto recovery restart, which works continuously until the short circuit condition is resolved, protecting the converter, the load and the converter’s input circuit from extremely high currents a short to ground causes. Input voltages of 3.3, 5, 12 and 24Vdc convert to single or dual output voltages of 3.3, (±)5, 9, (±)12 and (±)15, (±)24Vdc. Device operates within an ambient temperature range of -40C to 85C at full load without derating.

AIMTEC

Ultra-miniature SMT switch is side-actuated

Panel mount indicator LED is ruggedized

NSS series ultra-miniature, side-actuated tact switches for surface-mount termination provides an integrated side actuator with over travel, improving shock resistance and a tactile ratio of 30% minimum, with sharp feedback. The low-profile devices with hard actuators provides normally open contact and is designed to be compatible with surface-mount technology termination. With a footprint of 4.8mm x 4.0mm and a low profile of 1.0mm, device is durable with proven high resistance drop testing (up to 1 meter). Product allows for more than 300,000 lifecycles.

C&K COMPONENTS

Peerless Electronics 657 Series family of flat and domed panel-mount indicators provide a fully-sealed and potted design, making them impervious to dust and water intrusion and in compliance with IP67/NEMA 4X standards. Using the same high-impact, UV-stabilized lens material as the right-angle version, the indicators are available with tinted, diffused lenses in red, green, yellow, blue, and orange, in addition to a white diffused style.

DIALIGHT

http://ept.hotims.com/34481-93

http://ept.hotims.com/34481-92

www.schurterinc.com/new_cbes

Schurter’s popular TA35 series just got a new twist. The compact high performance circuit breaker now offers a rotary knob switch, in addition to its popular rocker switch. The heavy-duty look and feel provides safe and easy operation, even in applications where gloves are worn.

Customer specific colors for knob and bezel are available.

TA35 Series Features: - Status I/O indicator - Snap-in mounting - 1-, 2- or 3-pole versions - Current rating 0.5 – 20 A 1-pole and 2-pole; 0.05 to 12A 3-pole - Operating termperature of -30° to +60° C - 6.3 x 0.8mm quick connect terminals Conforms to IEC, UL & CSA standards. cURus and VDE approved.

http://ept.hotims.com/34481-94

Pushbutton switch has a 50-million life cycle LP16 series pushbutton switch has a 50-million life cycle expectancy, realized by the help of magnets. There are two cap sizes, 12.2mm and 14.6mm square, and several illumination options available. You can choose the cap color, LED color options and/or a diffuser color. Device has a long travel of 3.3mm.

E-SWITCH http://ept.hotims.com/34481-96

http://ept.hotims.com/34481-95

Photovoltaic protection fuses are UL 2579 listed HP6M, HP10M, and HP6J Helio Protection fuses are among the first UL 2579 listed range of dedicated photovoltaic fuses. Devices provide overcurrent protection at the combiner box and inverter levels and covers applications ranging from 1 to 400A, 600Vdc, and 1000Vdc. Product’s construction withstands temperature and current cycling, adding to system longevity. Low minimum breaking capacity capabilities of 1.35 times the fuse-rated current value allows for safe circuit interruption under typical low-fault current conditions produced by PV arrays.

MERSEN http://ept.hotims.com/34481-97

1.5-inch OLED display delivers touch panel solution Full-color 1.5" 128xRGBx128 PMOLED display is available with a 4-wire resistive touch panel, serving as a standard solution for PMOLED with touch panel. The resistive touch panel, combined with the PMOLED display measure under 3mm thickness. Module height is also suitable for 1U rack systems. Device provides storage temperatures -30 to +70C, ultra-wide viewing angles >160 degrees both horizontal and vertical. Device provides flexibility to your choice of interfaces 3/4 wire SPI, 8/16 bit CPU in both 6800 and 8080 type designs.

OSD DISPLAYS http://ept.hotims.com/34481-98

http://ept.hotims.com/34481-25

full online product listings at ept.hotims.com

switches & circuit protection

electronic products and technology • march-april 2011

Piezo audio chamber maintains output in harsh environments KPEG-1600 Piezo Audio Transducer utilizes the Helmholz formula, allowing it to maintain maximum output despite harmful harsh outside elements. Device delivers more than 105dB over a voltage range of up to 150V @30mA. Unit’s small size of 53D X 25mmH fits snugly in almost secure location. Product’s sealed, rugged construction assures consistent performance under almost any extreme environmental condition. Devices provide sealed wire lead terminals, assuring long product life and meet RoHS regulations.

TRANSDUCERS USA http://ept.hotims.com/34481-99

Compact switch extends operating life, delivers high reliability ZMA Series snap-acting switch line includes subminiature versions that can be used as detect switches, which provide a positive and reliable snap-acting mechanism in a small, compact housing. Available with various pcb terminals and nine different actuator configurations, including pin plunger, levers and simulated rollers of all sizes, device can be specified to meet a wide range of application requirements. The subminiature, snap-acting devices have a mechanical life span of more than 300,000 cycles @ 0.1A and include a contact rating of up to 3A at 125Vac. RoHS-compliant device provide an operating temperature range from -40C to +85C. C&K COMPONENTS

25

Ruggedized piezo switch gains ATEX approval PSE EX piezo switch has attained approval according to ATEX class II 2 G Ex ib IIB T4, enabling it to be utilized in potentially explosive facilities above ground. Product’s standard design is available for a mounting diameter of 16mm. Switching action is normally open. Voltage and current maximums are 24 Vdc/Vac and 40A respectively. The housing is offered in both aluminum and stainless steel. Color variations are available with the aluminum version.

SCHURTER http://ept.hotims.com/34481-104

Door opening pushbuttons meet TSI-PRM standards Series 56 door opening pushbutton provides raised and illuminated open/close symbols and meets European Technical Specifications of Interoperability for Persons with Reduced Mobility (TSI-PRM) standards. Product increases passenger awareness by heightened visual indication when used with other ADA components. Device is raised more than 1mm from the surface and is larger than 15mm wide, for improved usability and visibility for disabled passengers. It also features a brightly lit and highly recognizable ‘Door open’ or ‘Door close’ symbol. RoHS approved device operates in extreme temperature conditions from -49F up to +176F and are environmentally sealed to IP 67 at the front and to IP 65 in the rear.

EAO http://ept.hotims.com/34481-105

http://ept.hotims.com/34481-100

Coded switch is ruggedized M07A rugged gray coded switch is ruggedized and comes in 16 positions down to 2. BCD or Hex versions are available upon request.

Based on firm’s Type 07 switch line, device has a robust stainless-steel 6mm tapped shaft (3mm versions optional). Product meets MIL-STD-810F for salt fog and humidity and MIL-STD202G for shock and vibration. Product provides a high-strength re-enforced plastic body and IP60 or IP68 front panel sealing.

ELMA ELECTRONIC http://ept.hotims.com/34481-101

High temperature inductive proximity sensors 50mm high temperature inductive proximity sensors are available in stainless steel housings for high temperature applications of 250C (482F), provide switching distances of 40mm and are available in NPN or PNP. Each device that operates above 180C is designated with ‘EXT in the product syntax and requires an external amplifier to function. Two amplifier options are available, especiallyfor applications where continuous, reliable functioning at high ambient temperatures is required.

ASI http://ept.hotims.com/34481-102

Terminal blocks, interconnect carry 100kA SCCR Through-panel, chassis-mount terminal blocks, and interconnect devices have earned a 100kA SCCR (Short Circuit Current Rating) rating with appropriate fuses. Firm’s latest products with rating include 862 and 264 series chassis-mount blocks, 826 and 828 series through-panel blocks, 831 series multi connector system pluggable connector and X-COM S pluggable connector system.

WAGO http://ept.hotims.com/34481-103

w w w. e p t . c a

WANTED:

RECHERCHONS:

“My aim is to make sure that our weapon systems stay on track. As an electronic technician, I maintain, test and repair equipment for all operations. Here, accuracy is always in demand.”

Master Corporal JOCELYN GERVAIS

« Veiller au fonctionnement optimal de nos systèmes d’armement, voilà ma responsabilité.

Comme technicien en électronique, je procède au test, à l’entretien et à la réparation de l’équipement. Dans mon métier, la précision est une nécessité absolue. » Caporal-chef JOCELYN GERVAIS

ELECTRONIC TECHNICIANS

TECHNICIENS EN ÉLECTRONIQUE

http://ept.hotims.com/34481-26

CAF10102_10_EOT_BE_01.indd 1

11-02-01 10:06

26

electronic products and technology • march-april 2011

Industrial Automation

The many applications that can be laser cut.

L

Laser cutting, a.k.a. digital die cutting, uses high-powered lasers to vaporize materials in the lasers’ beam path. The powering on and off of the laser beam and the way in which the beam path is directed towards the substrate effects the specific cuts that the artwork requires. While cut away parts are vaporized, the hand labor or complicated extraction methods required for small part scrap removal, is eliminated.

These basic facts about laser cutting are as true today as they were when laser cutting systems were first put to practical industrial uses in the ’80s. However, recent advances in laser cutting technology and especially those that relate to the sophistication of the software engineering underlying laser cutting controls, have created dramatic improvements in the type of outputs that can be expected from laser cutters.

Today’s lower cost laser cutting systems made from less expensive components have far superior capabilities to the expensive systems that were designed and engineered only a few years ago.

At the top end, state-of-art laser cutting systems are able to consistently cut far more intricate designs in a wider range of substrates and with tighter tolerances than ever before. The challenge to those making investments in laser cutting technology is to source machines that are well matched to application requirements.

One can still find laser cutting systems in the marketplace that force compromises in quality or production output that should not be brooked in light of engineering advances in laser cutting technology. On the other hand, those with more straightforward application requirements are often wellserved by lower cost models of laser cutting systems that are powerful and versatile enough for the jobs at hand. In this article, we will discuss how to match today’s laser cutting technology to application requirements and offer insights into how various features of laser cutting systems translate into capabilities for quality and throughput as summarized in Figure 1 — Laser Cutting Technology Comparison Chart.

http://ept.hotims.com/34481-27

Matching laser cutting technology to application requirements By the Engineering Department at Spartanics Inc.

A preliminary step to sourcing the right laser cutting technology is to first determine if laser cutting capabilities are a good addition to your finishing department. There are numerous advantages to laser cutters, as compared to tool-based die cutting systems. Most of these advantages derive from the tool-free nature of laser cutters. Because there are no tools, there are no costs for tools or production delays for time to make tools. This is the major reason why laser cutters provide a rapid prototyping niche for those that use them.

Laser cutting systems are called digital die cutters because they can take any vector-based digital image and import it into their operating software to set up a job. Today’s best-in-class laser cutting systems can complete set up from these imported digital images in just a few minutes. The ‘digital die cutter’ term that is used interchangeably with laser cutting speaks to this advantage that tool-free cutting systems provide, especially when used in combination with digital printers.

This combination allows one to move from artwork to finished product in just a few hours, or even less for very short runs. In tool-based mechanical cutting

there are always intrinsic limitations from the physical contact between the cutting edge and the material being cut. A laser cutting systems bypasses that situation, which makes them able to cut many materials that are very difficult or impossible for tool-based cutting systems to handle. For example, cutting adhesives is far easier with laser cutting systems because of the tendency of adhesives to literally gum up the works in mechanical cutting systems.

Similarly, the ability of tool-free laser cutting systems to reliably handle thin substrates is a big advantage. In these thin substrate applications, cutto-print registration is not constrained by the physical limitations of weighty dies interacting with flimsy substrates. Another example is in the better handling of abrasive materials, which literally wear mechanical dies down such that cutting abrasives with mechanical cutting systems is often prohibitively expensive because dies have to be continuously replaced. Here too, tool-free laser cutting systems sidesteps this problem altogether.

The relative ease with which laser cutting systems create special features is also a considerable continued on page 32

FIG. 1: Laser cutting technology comparison chart.

Choosing Between Laser Cutting vs. Tool-based Die Cutting Systems

full online product listings at ept.hotims.com

Do More With Less!

17 pins in M12

More Signals, Less Space!

M12 is the leading connector style in the sensor/actuator field and is fast becoming the dominant connector for device manufacturers. the highdensity M12 series includes shielded or unshielded sensor/actuator cables, flush-type connectors with solder connection or with PieRCeCon connection.

Key Benefits include: 90% faster connection Space savings Rated for iP65/iP68/iP69K For additional information please contact: toll Free: (800) 890-2820 or visit: www.phoenixcontact.ca http://ept.hotims.com/34481-28

© Phoenix ContaCt 2011

28

industrial automation

electronic products and technology • march-april 2011

100W ac-dc power supply withstands extreme environments

Sealed USB connectors withstand extreme environment applications

PWI 100 Series industrial quality ac-dc switching power supply uses field-proven topology to convert a universal ac input (95Vac - 264Vac, 47-420Hz) to 12Vdc, 24Vdc or 48Vdc output. Other input/output values, including a 120-360Vdc input version, are also available. Full encapsulation in a thermally conductive MIL-grade silicon rubber compound ensures resistance to high levels of shock, vibration and moisture. Unit operates in a -40C to +70C cold-plate temperature range for full specification without derating. Cooling is via base plate to the customer’s heatsink or chassis.

ABSOPULSE ELECTRONICS

IP67 Series Rugged USB Connectors provide bayonet locking and water-resistance and compliant with USB2.0 specifications. Device provides high reliability in harsh environments, featuring robust internal components housed in black plastic and nickel-plated zinc die-cast with a bayonet locking termination rated to IEC 61076-3-106 specifications. Product’s contacts are phosphor bronze and gold-plated with improved contact resistance rating. Current ratings are 1.5A maximum at 25C, and operating temperature ranges from -40C to +85C. CONEC

http://ept.hotims.com/34481-108

http://ept.hotims.com/34481-110

Photovoltaic cable is reliable, flexible

Right-angle PCI socket fits surface, edge-mounts PCIE Series Right angle PCI Express sockets are suitable for right angle applications, which includes surface mount and edge-mount designs for perpendicular and co-planar card interfaces.

Similar to through-hole and edge mount versions, devices support one, four, eight, and sixteen PCI Express links and accept 1,6mm cards. These 1mm (.0347”) pitch sockets have standard alignment pins, polarization, and a rugged latching feature for card mounted retention clips.

SAMTEC

Photovoltaic wire and cable provide maximum reliability and flexibility to prevent costly downtime and disruption to the energy grid, withstanding extreme rigors of solar applications. The oil and sunlight resistant UL 4703 PV wire/TUV Pfg 1169 LSZH wire is available from 14 AWG to 2 AWG and withstand a temperature range of -40C to +90C. Product is comprised of stranded bare copper conductors, PVC jacket, PVC/nylon insulation, tinned copper braid shield.

ALPHA WIRE http://ept.hotims.com/34481-109

http://ept.hotims.com/34481-111

The first four-channel scopes built for CAT IV environments

Digital hydraulic tester is compact, lightweight HFP-110/120 digital hydraulic tester is a compact, lightweight, self-contained and portable with laboratory accuracy.

Designed for fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems and components, product makes all flow pressure and temperature measurements simultaneously from one point. Unit provides large digital LCD display and is CE compliant HFP-110/120. Product has pressure relief disc protection and low battery/over-range indicators.

OMEGA http://ept.hotims.com/34481-112

The new 190 Series II ScopeMeter® is the only high-performance CAT IV oscilloscope you can safely take into harsh, dirty industrial environments.

Interconnect kit provides on-site packaging JUGO-NUTS kit of interconnect devices provides a portable container carrying job-site quantities of WALLNUTS, LEVER-NUTS or LUMI-NUTS connectors. JUGO-NUTS, measuring 4 5/8’’ square by 6 3/4’’ high, are positioned between smaller Contractor Boxes and bulk carton quantities. Product provides a screw-top lid for on-the-job convenience I nnew construction, remodels, retrofits or specialty projects.

WAGO

CAT III 1000 V/CAT IV 600 V safety rated with a IP 51 dust-proof and drip-proof rating. It offers four independent isolated input channels for testing three-phase power electronics or three-axis testing of industrial automation control systems. With new 7-hour Li-ion batteries and two isolated USB ports, it’s the toughest, most powerful and convenient ScopeMeter ever built.

http://ept.hotims.com/34481-113

Hazardous location cable glands deliver strain relief

Call 800-363-5853 to arrange a demo or for more information.

EEx E and ATEX rated cable gland line is available in metric or PG threads in a range from M16 to M25 and PG7 to PG29. Cable glands and strain relief fittings are made of high performance nylon and can be ordered in either blue or black colors. Product’s operating temperature range is -25C to 90C and meet increased safety ratings for hazardous locations including an ingress protection level of IP65, NEMA 4, and 4 X. ASI

Learn more at www.flukecanada.ca/fourchannel ©2010 Fluke Corporation. Specifications are subject to change without notice. Ad no. 3832879A http://ept.hotims.com/34481-29

http://ept.hotims.com/34481-114

Scopemeter 7x10 Ad.indd 1

11-01-07 12:30 AM

full online product listings at ept.hotims.com

®

Win an iPad!

Go to www.alliedelec.co m/ia to register for a chan ce to win.

One iPad awarded ea ch week through April 18, 20 11.

THINK ALLIED

SM

1.800.433.5700 http://ept.hotims.com/34481-30

© Allied Electronics, Inc 2011. ‘Allied Electronics’ and the Allied Electronics logo are trademarks of Allied Electronics, Inc.

An Electrocomponents Company.

30

industrial automation

electronic products and technology • march-april 2011

Test leads change tip length with a single twist TL175 TwistGuard Test Leads come with a manually adjustable test tip guard for use in changing measurement situations. By simply twisting the test lead, the user can change the exposed probe tip length from ¾ in (19 mm) to 4/25 in (4 mm). Fully extended, the device is safety rated for CAT II 1000 V use. When retracted the test leads are safety rated for CAT III 1000 V and CAT IV 600 V. FLUKE ELECTRONICS CANADA http://ept.hotims.com/34481-115

150C RoHS signal connector is fully sealed Metr1x Series fully-sealed (IP69K) RoHS compliant hightemperature signal connector provides high reliability and 100% signal integrity in extremely harsh environments as well as increased functionality and vibration resistance in complex thermodynamic conditions. Product operates at 100Vdc with a current rating of 4A and provide complete EMI shielding. Devices conform to UL94-V0. The stainless steel design, sealed to IP69K standards, remains fully dry and functional even in conditions involving heavy salt spray, engine oil, diesel, kerosene and similar noxious fluids.

ITT INTERCONNECT SOLUTIONS http://ept.hotims.com/34481-116

EP&T Magazine

Panel/desktop industrial computer powered by leading processors TR-MAXIM-JF server class computer improves terms of reliability, I/O bandwidth and graphics.

System is powered by a telecom grade micro ATX motherboard that includes sockets for 2 x Intel JASPER FOREST Dual or Quad Xeon processors, up to 2.53GHz and up to 48GB of parity ECC memory.

Product comes with 6 x USB 2.0 ports, 2 x non isolated serial ports, 1 x audio port, PS2 type keyboard/mouse ports and up to 4 additional isolated RS232C, RS422 and RS485 ports on an optional PCI card. Product has 2 x PCIe and 1 x PCI slots for adding expansions cards if needed. System is powered by a 550W dual hot swap power supply that provides redundant power.

TRANSDUCTION http://ept.hotims.com/34481-117

Voltage alert reduces risk of electrical arc flash

March / April

UPA Voltage Alert reduces the risk of electrical arc flash by providing a visual indication of the electrical isolation from outside of an electrical panel. Hardwired to the circuit breaker or main disconnect, active or stored energy potentials (40-750 Vac & 30-1000 Vdc) occurring between 2011 any combination of the four monitored input lines (L1, L2, L3, GND) are indicated by flashing LEDs. Ground fault problems are shown too. Engineered with redundant circuitry, product is powered by the same voltage that it indicates.

Available in 2 sizes, the easy to install device fits through standard 30mm pushbutton and conduit knockouts.

CONNECTRIC SYSTEMS http://ept.hotims.com/34481-118

Power MOSFETs solve density issue in industrial point-of-load Family of 25V and 30V devices include firm’s latest HEXFET MOSFET silicon in a performance PQFN 3 x 3 package that delivers a high density, reliable and efficient solution for dc-dc converters.

Product enables up to 60% higher load current capability than standard devices in the new compact footprint while overall package resistance is significantly reduced to deliver extremely low on-state resistance (RDS(on)).

INTERNATIONAL RECTIFIER http://ept.hotims.com/34481-119

Linear Hall-effect sensor IC lowers jitter with high accuracy A1356 linear Hall-effect sensor IC with pulse width modulated output, provides higher carrier frequency of 2 kHz. Device is high precision, user programmable, Hall-effect linear sensor with a pulse width modulated (PWM), open collector output. The duty cycle (DC) of the PWM output signal (freq: 2 kHz) is proportional to an applied magnetic field. Product converts an analog signal from its internal Hall sensor element to a digitally encoded PWM output signal. The coupled noise immunity of the digitally encoded PWM output is far superior to the noise immunity of an analog output signal.

ALLEGRO MICROSYSTEMS http://ept.hotims.com/34481-120

http://ept.hotims.com/34481-31 7x10_CE_Envir.indd 1

2/7/11 10:26 AM

full online product listings at ept.hotims.com

industrial automation

electronic products and technology • march-april 2011

High bright, optically bonded display series is LED based

BGA processor improves performance with extreme temperature socket

Clearview Series of high performance displays are both high bright, 1000+ nits based on LED edge lighting and optical bonding. Product’s range from 8.4” to 22” wide screen and offers wide temperature ratings and guaranteed long product life cycles.

Brightness performance achieved is between 1000 and 1200 nits (candela /meter2), depending on the display. The solid state lighting systems are twice as efficient as the CCFL lighting they replace. Units can be turned on at the rated operating temperature of the display which ranges from -20 to -30C (depending on display). The LEDs can also be dimmed to less than .5 nits, for night operation.

GDS

293 BGA socket addresses high performance requirements for testing digital camera processor - CBT-BGA-7005. Contactor is a stamped spring pin with 26 gram actuation force per ball and cycle life of 500,000 insertions. Device’s self inductance is 0.88 nH, insertion loss < 1 dB at 15.7 GHz and capacitance 0.097pF, while the current capacity is 4 amps at 80C temperature rise. Socket temperature range is -55C to +180C. Socket also features a floating guide for precise ball to pin alignment.

IRONWOOD ELECTRONICS http://ept.hotims.com/34481-125

http://ept.hotims.com/34481-121

Automotive-Grade F-RAM boosts performance, lowers power FM24V01-G and FM25V01-G serial F-RAM memory devices join firm’s V-Family product line that meet AEC-Q100 Grade 3 automotive qualification standards. Devices are 128-kilobit (Kb) high-performance nonvolatile F-RAM memories that operate over a wide operating voltage range of 2.0 to 3.6-volts. With a serial I2C interface, devices provide wide-voltage operation of 2.0 to 3.6volts and have an active current of 90µA (typical at 100KHz). Product performs at full bus speed of 40MHz with an active current of 2.5mA. RAMTRON

TFT display withstands rugged conditions PM102ZY3 10.2” WSVGA TFT display (manufactured by Prime View (PVI)/E-Ink) provides a wide screen format with support for three to five years targeting the industrial market, with a native resolution of 1024 x 600 pixels. Firm has increased the product’s life cycle from the industry standard 18-months to up to five years. Product includes a wide operating temperature range of -20C to +80C, a low power LED backlight and a small outline rugged packaging that measures 235mm wide by 146mm high by 6.2mm deep.

AZ DISPLAYS http://ept.hotims.com/34481-126

http://ept.hotims.com/34481-122

Variable diameter cable ferrite mitigates RFI/EMI interference SS28B2044 Variable Diameter End Port (VDEP) ferrite mitigates unwanted RFI/ EMI interference for applications that operate between 10MHz and 1GHz. Device provides 260 ohms of impedance at 100MHz and integrates 16 spring-like flutes around the inside diameter of its nylon case. Device’s characteristic allows for rapid and easy installation on cables ranging from .125” to .730”. An optional adhesive mount pad can also be added to the ferrite base to help anchor cables inside an electronic enclosure.

LEADER TECH http://ept.hotims.com/34481-123

Heavy duty subrack withstands high shock, vibration KM6-HD subrack system is designed for use in harsh environments where equipment will be subject to shock and vibration during use. Product is manufactured as standard in 3U, 6U and 9U heights, depths of 160mm, 220mm and 400mm and in 42HP half and 84HP full widths, the IEEE 1101.10/11 compliant KM6-HD 19” subrack features positive guide locking and retention, heavy-duty front and rear tiebar extrusions with two screw fixing, 3mm thick side plates and rack mounting angles and a conductive finish throughout. KM6-HD meets the requirements of VME64X, VPX, cPCI and similar open architecture specifications.

VEROTEC http://ept.hotims.com/34481-124

http://ept.hotims.com/34481-32

w w w. e p t . c a

31

32

industrial automation

electronic products and technology • march-april 2011

Industrial multimeters approved for use in mining situations

RD24 connectors accept larger cables RD24 Series 692 and 693 right-angle connector line expands with PG11 and PG 13.5 cable outlets. The male and female cable connectors accept cables with an OD of 8-12 mm. Products have cable outlets that are PG11 or PG13.5, making it possible to fit cables with diameters between 8-12mm. All Series 692 and UL approved 693 connectors are offered with 3+PE or 6+PE silver contacts. A screw clamp termination is available for the 3+PE versions and a screw clamp, solder or crimp termination are available for the 6+PE versions.

BINDER-USA

Fluke 27 II and 28 II Industrial Multimeters have gained approval for use in mining situations. The MSHA approval adds another element of versatility to the ultra-rugged units. Both meters have IP 67 (waterproof and dustproof) rating, extended operating temperature range of -15C to +55C (5F to 131F, -40C for up to 20-minutes) and function in up to 95% humidity. Both have been designed and tested to withstand a 3m (10 ft) drop.

FLUKE ELECTRONICS CANADA

http://ept.hotims.com/34481-130

http://ept.hotims.com/34481-127

Aerospace materials extend component life SKYFLEX® Aerospace materials family includes preformed gaskets for multi-face aircraft applications such as hole liners, flange joints, fastener seals, and galley or restroom hard-mounts. These lightweight, non-hazardous gaskets ensure continuous protection between flat interfaces, around chamfers, and inside a component’s mounting hole. By isolating dissimilar materials completely, these new gaskets significantly reduce the likelihood of galvanic corrosion, thereby increasing the life of the component.

W. L. GORE & ASSOCIATES http://ept.hotims.com/34481-128

Voice coil actuator alleviates tight constraints BEI Kimco Magnetics Model LA05-05-000A miniaturized cylindrical shaped voice coil actuators measures 0.5" in diameter by 0.5" in length at mid-stroke, approximately 0.5" smaller than typical models on the market. Size reduction helps meet tight packaging constraints. Device provides outstanding performance characteristics including a force of 2.5ozf, a total stroke of 1.02mm, and an actuator constant of 1.04 N/sqrt (watt).

CUSTOM SENSORS & TECHNOLOGIES http://ept.hotims.com/34481-129

CUstom mediCAl imAging lenses Wide variety of lens assemblies in stock for high-res diagnostic cameras. Over 60 years of design and manufacturing experience.

1000s of Lens Sizes in Stock.

Most Lenses Ship Same Day. From PrototyPe to Production SINCE 19 4 9

UK Aoptics.com 516-624-2444 info@ukaoptics.com

© 2011 Universe Kogaku (America) Inc.

http://ept.hotims.com/34481-33

Matching laser cutting technology continued from page 26

advantage. Perforations, score lines, kiss cuts, consecutive numbering, creasing, personalizing and other special features are done as a matter of course by laser cutting systems. This is especially the case with today’s laser cutting technology that uses far superior software engineering to precisely control the movement of laser beams making cuts.

In fact, the only relevant physical limitation in laser cutting systems is the width of the laser beam - for example in 200mm x 200mm working fields or greater the spot size can be as small as 210 microns in best-in-class systems. While any die-based cutting system would have difficulties in producing corners that are less than 30-degrees, this is not in any way challenging for a laser cutting system. Also, laser cutting technology allows one to skip the step of creating mechanical knicks to facilitate parts extraction as is typically required with a tool-based cutting mechanism.

There are limitations to laser cutting systems, as with any technology, but also there are mistaken notions as to what these limitations are. In some quarters laser cutters are thought of only as prototyping tools and not up to the requirements of full production runs. While there are many applications where laser cutting may be slower as compared to platen presses, rotary die cutters or opticallyregistered gap presses, they are considerably faster than the earlier laser cutting systems that used to predominate.

In fact, most users of today’s laser cutting systems ARE using them for full production line capabilities. For one thing, today’s laser cutters are generally galvo

An Eye for Innovation

Bringing Precision, Flexibility and Experience to Wire Processing

NEW UniStrip 2300 n

Fully programmable benchtop wire stripper

n

Strips wire from 10 - 32 AWG and jacketed cables up to 0.22” in diameter

n

Intuitive color touchscreen user interface

n

No mechanical adjustments required when changing wire sizes

n

Can strip inner conductors of jacketed cables with short breakout lengths

n

Trigger sensitivity automatically adjusted based on wire size

FIG 2: Laser cutter machine cutting a label.

(galvanometer) type lasers that make minute adjustments in mirror angles to move laser beams around artwork. This galvo mechanism is considerably faster than gantry systems with XY plotters that physically move lasers as a whole or the whole sheet of material being cut, not just the laser beams. Newer galvo technology takes this speed improvement to the next level by fine tuning software to shave milliseconds off of most operations, with a combined effect of significant speed improvements. The higher the wattage of the laser, the faster the cutting proceeds in most applications.

The difference today is that faster 200watt and 400 watt lasers that were prohibitively expensive five or so years ago are now available at competitive prices.

These new lasers also make a higher quality laser beam, which in turn ensures that cutting quality is maintained even at higher cutting speeds. The upshot of all these combined speed improvements is that today’s laser cutters do far more than prototype samples; they are used for full production runs without creating production bottlenecks.

(Note: Manufacturers‘ claims on linear cutting speed are not meaningful in most instances. Actual cutting speed is determined both by the complexity of the artwork and ability of the control software to optimize cutting in that geometry, as explained below.)

Another misconception that one still finds is that laser cutting is a dangerous operation that burdens a workplace with safety risks. Though it may seem counterintuitive to some, laser cutting systems are in many ways a safer alternative to tool-based cutting systems. The initial installation of a laser cutting system takes care to eliminate the chance of stray beams creating workplace hazards if workers do not wear safety glasses. Toolbased systems, on the other hand, pose a continual risk of severe worker injury if they are not operated properly.

Although such accidents are rare, they can be catastrophic. Costly injuries to tooling are somewhat more common, such as when technicians leave tiny screws in a cutting area that end up destroying the custom tooling.

For more informationon laser cutting technology from Spartanics, go to: http://ept.hotims.com/34481-131

www.schleuniger-na.com/US2300_ept (905) 827-1166 http://ept.hotims.com/34481-34

full online product listings at ept.hotims.com

engineering technical & white papers / products on review

electronic products and technology • march-april 2011

engineering Arbitrary noise generator tests high speed, bandwidth devices 81160A pulse function arbitrary noise generator provides innovative functionality and streamlined setup to help engineers complete a broader test set more quickly. Unit eliminates the need for cumbersome multi-instrument setups for stress testing devices. Unit provides versatile waveforms along with superior signals with an intrinsic jitter of 7 ps rms. Product generates 330MHz pulses and 500MHz function/arbitrary waveforms with a 2.5-GSa/s sample rate and 14-bit vertical resolution AGILENT TECHNOLOGIES http://ept.hotims.com/34481-57

TECHNICAL TECHNICAL && WHITE WHITE PAPERS PAPERS

AN INTRODUCTION TO INDUSTRIAL ETHERNET CONNECTION SYSTEMS

ELECTRONIC COMPONENTS PRICE BENCHMARKING

Unlike traditional office settings, Ethernet has spread into environments where protection from noise, solids, liquids and even gases is of concern. Conditions in these environments warrant the use of industrial grade connectors and connection systems which can be found in RIA Connect’s X|Synergy product line.

LYTICA INC. has launched FREEBENCHMARKING. COM, the electronic industry’s first, and only, web-based component price benchmarking service. Procurement and Engineering Managers now have access to a fast, accurate and confidential web tool that will deliver a competitive analysis of their costed BOM’s right to their inbox within one business day. No more wondering and worrying if your component pricing is competitive. For a free analysis of your total BOM spend, try the FREEBENCHMARKING. COM Silver Report. www.freebenchmarking.com www.lytica.com Lytica Inc.

www.riaconnect.com RIA Connect, Inc. http://ept.hotims.com/34481-35

http://ept.hotims.com/34481-36

Ultra low temperature freezer is suitable for multi-user labs SECURE GUARD ULT freezer (ultra low temperature) for the multi-user laboratory is developed in collaboration with leading laboratories.

Product fits seamlessly into the series of firm’s products. based on an innovative 4-zone security concept and in addition to reliable cooling and storage of specimens at -86C, product provides promises more security in daily use.

BINDER

Your Canadian Resource For Business Acceleration

http://ept.hotims.com/34481-58

June 21-23, 2011 | Toronto Congress Centre | Toronto, ON

Silicone encapsulant dissipates heat LORD SC-305 Thermally conductive silicone encapsulant is suitable for applications where high heat dissipation is required. The two-component silicone system works well for LED lighting power supply encapsulation, and can be room temperature or heat cured for maximum adhesion. Prodeuct benefits include low stress, high thermal conductivity and improved environmental resistance.

LORD CORP. http://ept.hotims.com/34481-59

Help Wanted CSR REP WANTED ARBELL, the leading Canadian Distributor to the electronic assembly industry has an opening in Burlington in their Customer Service department. This position handles a group of accounts and enters orders, prepares quotes and handles customer inquiries. It is a very hands on job, multitasking in a fast paced fully computerized environment. Arbell offers excellent salary and benefits.

Canada’s Premier Event for Advanced Design and Manufacturing Professionals Featuring:

• Software

• Contract manufacturing

• Electronic components

• Equipment

• Subassemblies

• Rapid prototyping

• Motion Control

And much more!

Send resumes to careers@arbell.com Supported by:

TECHNICAL INSIDE SALES REPRESENTATIVE We are looking for an energetic, self motivated team player with a strong work ethic, excellent attention to customer service, a sense of urgency and positive attitude to join our Sales Staff as Inside Sales Account Manager. Stealth Computer is a Canadian Manufacturer of Specialized Computer& Peripheral Hardware, located in Vaughan, Ontario.

Send resumes to: hiring@stealth.com

w w w. e p t . c a

Co-located with:

For information on exhibiting or attending

DM-CanadaShow.com 17917_CN_DM11

Promo Code: AB

33

expressmart / advertisers’ index

express

Proof at 100%

electronic products and technology • march-april 2011

mart

Proof at 100%

Absopulse Electronics Limited . . . 10

Proof at 100% -

ADVERTISERS’ INDEX

34

Active Tech . . . . . . . . . . . . 7 (insert) Agilent Technologies

Canada Inc. . . . . . . . . . . . . . . OBC

PCB Design Services • Professional PCB layout, schematic capture, library maintenance, leading-edge design tools • Standard/customized documentation for board fabrication, BOM, assembly & production • Professional and dependable services, tailored to address your needs • Manage board fabrication and assembly • Expert design team • Experienced DFM techniques assure quick, low-cost prototyping and production

Custom RF Coaxial Cable Assemblies

Comtree

Allied Electronics, Inc . . . . . . . . . . 29

inc.com

Alpha Wire Corporation . . . . . . . . 26

Tools for the Electronics Industry

ASET . . . . . . . . . . . . . . . . . . . . . . . 16

Design for Test & Manufacturing

Offshore Prices, Local Supply!

Assembly

Our designer is the extension of your staff.

We are your PCB design center and outsourcing partner.

www.gapwirelessonline.ca Tel: 905.826.3781 • info@gapwireless.ca

Boardtech Integration

Birde Marketing Inc. . . . . . . . . . . . 20 Canon Communications LLC . . . . . 33

Test and Verification

Central Semiconductor Corp. . . . . 19

• Solder • Matts • Chemicals • Flux • Stencils • Recycling Programs

We have standard RF coaxial cables in stock and can assemble per customers’ requests in just 7 days. Contact us now!

155 Tycos Dr, Unit 37, Toronto ON M6B 1W6

Electro Sonic . . . . . . . . . . . . . . . . 18 ELMA Electronic Inc. . . . . . . . . . . . 23 EMX Enterprises Ltd. . . . . . . . . . . . 14

Proof athttp://ept.hotims.com/34481-39 100%

http://ept.hotims.com/34481-38

Digi-Key Corp . . . . . . . . . . . . . . . . . 5

Comtree Inc.

Serving the Canadian Electronics Industry Since 1996

Proof at 100%

http://ept.hotims.com/34481-37

Conec Corp. . . . . . . . . . . . . . . . . . . 3

905.673.7777 info@comtreeinc.com

www.comtreeinc.com

www.boardtechintegration.com • Tel: 416.399.6297

Avnet EM(AZ) . . . . . . . . . . . . . . . . 17

Fluke Electronics . . . . . . . . . . . . . 28

Hammond Mfg. Co. . 11 (insert), IBC

Irwin Industrial Agencies Limited . . 4 Linx Technologies Inc . . . . . . . . . . . 6 Lista International Corp. . . . . . . . . 20

Innovative design to take you anywhere

Contract electronic design DC-DC Power conversion Li-ion battery power management Battery charging technology PCB Design/Layout Prototyping No minimum production volume CGD/ITAR Certified IPC-A-610

Ba S M

In the field of security, TEMPEST requirement NSA 94-106 is among the most stringent.

Equipto Electronics new R6 Rack Enclosure far exceeds this standard for EMI/RFI protection, keeping your secrets in or nasty external signals out.

Remarkably fast turnaround!

Alti-tech.com

info@alti-tech.com

(604) 215 9400

http://ept.hotims.com/34481-40

Miller-Stephenson Chemical Learn more about Eq Co. Inc. . . . . . . . . . . . . . . .Please . . . . . contact 6 us tod Mouser Electronics . . . . . . . . . . . . . 9

New Rack Cabinet has Highest EMI/RFI Protection

Murata Power Solutions . . . . . . . . 14

Electronic Manufacturing Services Provider

Tel: 800.204.7225 ext. 9 • 630.859.7840 Email: sales@equiptoelec.com (Aurora, IL)

www.creationtech.com

ISO 9001:2008 • RoHs Compliant

Tel: 604.430.4336 • info@creationtech.com

http://ept.hotims.com/34481-41

http://ept.hotims.com/34481-42

Canada’s premier series of electronics trade shows are back for 2011...

Noren Products . . . . . . . . . . . . . . 31

ODU USA Inc. . . . . . . . . . . . . . . . . 13 Features: • Front, rea Omega Engineering Inc. . . . .or . .panels . . IFC • Line filters ter in of depth Phoenix Contact Ltd. . . . . . . . . . .choice 27

We are a global Top-50 EMS provider focused high-mix, high-complexity start-to-finish manufacturing and supply chain solutions in the Instrumentation & Industrial, Medical, Multimedia & Computers, Communications, Defense and Environment & Security industries.

Creation operates 11 manufacturing facilities in British Columbia, California, Texas, Minnesota, Wisconsin, Illinois, Kentucky, Ontario and China.

www.equiptoelec.com

National Defence . . . . . . . . .(Logo) . . . . 25

Positronic Industries, Inc. . . .www.equiptoelec.com . . . . 30 Probe Master Inc. . . . . . . . . . . . . . 22 Ext. 9/ 6 Protocase . . . . . . . . . . . . . . .800-204-7225 . . . . 21

Schleuniger . . . . . . . . . . . . .email: . . . . sales@equiptoel 32

Schurter Inc. . . . . . . . . . . . . . . . . . 24 ISO 9001:2008 ï RoHs TDK- Lambda Americas Inc. . . . . . 12 Tektronix, Inc. . . . . . . . . . . . . . . . . . 8

Universe Kogaku America . . . . . . . 32 On Thu, Feb 24, 2011 a Vicor Corp. . . . . . . . . . . . . . .Loney@ept.ca> . . . . 15 wrote:

2011 CALGARY March 8

This is your opportunity to see thousands of products in person and discuss issues with knowledgeable exhibitors who know their products in a face-to-face setting.

•

EDMONTON March 10

MONTREAL/POINTE-CLAIRE April 5 • 10am - 5pm

TORONTO

The EPTECH Show has thousands of LEADING-EDGE PRODUCTS on display:

April 7 • 10am - 5pm

OTTAWA

• Passives • Switches • Wire & Cable • ICs • Test Equipment • Data Acquisition • Electronic Components • E-Commerce • Industrial Electronics • Peripherals • Relays • Hardware • Semiconductors • Tools • Connectors • Batteries • CAE/CAD Systems • Sensors • Chemicals • RoHS Compliant Products ... and many more

May 12 • 10am - 4pm

VANCOUVER/COQUITLAM June 2 • 10am - 5pm

QUEBEC CITY/STE. FOY September 20 • 10am - 4pm

PLAN TO ATTEND if you are an: • Engineer • Designer • Technician • Purchaser • Technical & Senior Management ... or are involved with electronics

HALIFAX

September 22 • 10am - 4pm

MISSISSAUGA

Sponsored by:

October 20 • 10am - 5pm

electronic products and technology

800-12 Concorde Place Toronto, ON M3C 4J2 Tel: 416.510.5207 Fax: 416.510.5133 email: eptech@ept.ca www.ept.ca

FREE Registration!

Free Parking

Register Online at www.ept.ca/eptech/

http://ept.hotims.com/34481-46

http://ept.hotims.com/34481-44

http://ept.hotims.com/34481-47

http://ept.hotims.com/34481-45

http://ept.hotims.com/34481-48

http://ept.hotims.com/34481-49

Hello future.

Oscilloscopes Redefined Starting at $1,230*

Agilent 2000 X-Series (MSO and DSO)

Agilent 3000 X-Series (MSO and DSO)

Popular Competitor's Series (MSO and DSO)

Bandwidth (MHz)

70, 100, 200

50, 70, 100, 200

100, 200, 350, 500

100, 200

Max sample rate

2 GSa/s

2 GSa/s

4 GSa/s

1 GSa/s

Max memory depth

100 kpts

2.5 kpts

4 Mpts

1 Mpt

Max update rate (waveforms/sec)

50,000

200**

1,000,000

5,000

Fully upgradable

Yes

No

Yes

No

Function Generator

Yes

No

Yes

No

Notes:

Š 2011 Agilent Technologies, Inc. *All prices are in USD and subject to change

Popular Competitor's Series (DSO)

Agilent and our Distributor Network Right Instrument.

Right Expertise.

Delivered Right Now.

**Refer to Agilent Pub 5989-7885EN for update rate measurements Data for competitive oscilloscopes from competitor publications 3GW-25645-0 and 3GW-22048-1

See the difference today.

800-463-9275 www.newark.com/agilent

http://ept.hotims.com/34481-50

www.newark.com/Agilent_Scopes