Design Engineering March/April 2013

20 Creaform CFD expertise helps push street luge speed limits

30 PowerWalk provides wearable 42

electric generator for gadgetladen soldiers Fluid power leaders discuss the the industry’s future in Canada $27.00 | March/April 2013

Mechanical Art Hackers

Vancouver’s eatART foundation, and its mechanical sculptures, combine artistic whimsy and engineering know-how to illuminate energy issues

PM 40069240

Phot o by

1-DES.indd 1

Mich ael J .P.

Hall

FLUID POWER & CONTROLS BUYERS’ GUIDE

P.32

13-04-16 11:54 AM

DesignE

Loctite Threadlockers ®

When it comes to: • resisting vibration • preventing corrosion and leakage • improving quality • reducing weight, size and cost,

mechanical locking devices just don’t hold up.

CLAMPLOAD RETENTION COMPARISON 100 80

Clampload %

Proven Solutions.

Terrific track record.

Superior results.

60 40 20 0 0

200

400

600

800

1000

Number of load cycles ■ Bolt with Loctite® liquid threadlocker and nut

■ Bolt with tooth lock washer and nut

■ Bolt with split ring lock washer and nut

■ Bolt with elastic stop nut ■ Unsecured bolt and nut

By filling the thread roots and preventing side-to-side movement, Loctite® threadlockers have dramatically increased the reliability of threaded assemblies for over 50 years. New advancements provide higher temperature resistance, improved oil tolerance and primerless performance. Don’t let your designs fall apart. Use Loctite®.

To learn more about our newest threadlockers – Loctite® 243™ and Loctite® 263™ – go to www.useloctite.com/de. For technical assistance, call 1.800.263.5043.

V

Excellence is our Passion Except as otherwise noted, all marks used are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere. ® = registered in the U.S. Patent and Trademark Office. © Henkel Corporation, 2010. All rights reserved. AD-116-11 (05/11)

AD-116-11 Design 2-3-DES.indd 4 Engineering.indd 1

26/05/11 9:17 1:08AM PM 13-04-08

1 1:08 PM

DesignEng_0313_Layout 1 2/28/13 11:28 AM Page 1

Load Cells & Transducers for Energy Production Cellules de charge & transmetteurs pour la production d'énergie PX409 Series/Série Starts at À partir de $475

High Accuracy Pressure Transducers Now with 0.05% Accuracy and 0.03% Linearity Options Capteurs de Pression de Haute Précision, Maintenant avec une précision de 0.05% et une linéarité de 0.03% offertes en options • High Accuracy ±0.08% BSL Includes Linearity, Hysteresis, and Repeatability • Broad Temperature Compensated Range -29 to 85°C (-20 to 185°F) • Grande précision ±0,08 % MLD incluant linéarité, hystérésis et répétitivité • Plage étendue de température compensée -29 à 85°C (-20 à 185°F) Visit/Visitez omega.ca/px409_series

High-Accuracy Miniature Universal Load Cells Cellules de charge miniatures universelles de haute précision LCM203 Series/Série Starts at À partir de $585

Visit/Visitez omega.ca/lcm203

Metric Pressure Transducers, 1% Total Error Band Capteurs de pression métriques 1% d'erreur totale de la plage

LCMGD Series/Série Starts at À partir de $470

Because of transmission frequency regulations, these wireless products may only be used in the United States, Canada and Europe.

En raison de la réglementation sur les fréquences de transmission, ces produits sans fil peuvent être utilisés seulement aux États-Unis, au Canada et en Europe

2-3-DES.indd 5

PX309 Series/Série Starts at Á partir de $175

Visit/Visitez omega.ca/lcmgd M ®D

All Stainless Steel Pressure Transducers High Performance Silicon Technology Capteurs de pression tout en inox avec technologie de silicone haute performance

omega.ca 976 Bergar Laval, Québec Canada H7L 5A1

Visit/Visitez omega.ca/px309 MD

© COPYRIGHT 2013 OMEGA ENGINEERING INC. ALL RIGHTS RESERVED © COPYRIGHT 2013 OMEGA ENGINEERING, INC. TOUS DROITS RESERVES

®

13-04-08 9:17 AM

Schaeffler_DesignEng_Ad_MarchApril_2013_Wind_Focus_Schaeffler 3/7/2013 9:43 AM Page 1

If your wind turbine isn’t using Schaeffler parts and services, it’s just another windmill.

Four reasons why this is no idle boast: Experience

With our renowned INA and FAG brands, Schaeffler has more bearings currently operating inside wind turbines than any other manufacturer. That’s unmatched know-how.

Research & Development

Schaeffler has the world’s largest, most powerful test rig for large-size bearings. Which means we can improve the reliability, safety and cost-effectiveness of future wind turbine designs like no other company.

Innovation

Schaeffler’s new, ultra-durable X-lifeTM quality E1 spherical roller bearings now feature black-oxided rollers and a 2-piece cage design that generate less wear and improve lubrication.

Bottom line: they last longer and reduce downtime.

Service

A genuine breakthrough in condition monitoring, Schaeffler introduces WiProM with FisNet: the industry’s first truly costeffective diagnostic tool for analyzing the performance of wind turbine components. Did we mention that it all fits inside our signature yellow carrying case? www.schaeffler.ca

©2013

4-5-DES.indd 4

Superior-quality products.

Comprehensive reliable solutions.

13-04-09 1:02 PM

al e n.

er tof s

5

8 Canadian

researcher’s coating to end smudgy touch screens.

10

MDA to 3D scan near-Earth asteroid

10

Ballard signs research deal with Volkswagen

10

Campagna Motors, BMW sign engine supply deal

11

Phoenix Contact hires new regional sales manager

11

Next-gen Canadian 3D-printed car looks to set world record

12

Neptec to develop cameras for ExoMars Rover

12

Report suggests global wind resource potential over-blown

Columns

14

14 CAD Report PLM analyst firm, CIMdata, explores the top 10 industry trends driving CAM software 20 CAD Beat Creaform’s scanning system and computational fluid dynamics expertise push back the speed limits in street luge

20

22 Motion Control Chosen wisely, integrated motors offer a step up in price, programmability and performance 24 Idea Generator The latest in industrial products including motors, motion control and sensors 30 Canadian Innovator PowerWalk knee brace provides wearable electric generator for gadget-laden soldiers

30

Features 34 Fluid Power News Festo launches robotic dragonfly, the BionicOpter, at Hannover Messe

e ny

or ae

Contents | Volume 59, No. 2

IN THE NEWS

READER SERVICES Annual Subscription Rate In Canada: $52.95 (1 year) $71.95 (2 year) Outside Canada: $99.95 (1 year) Single Copy In Canada: $10.00 Outside Canada: $22.00 Directory Rates In Canada: $27.00 Outside Canada: $45.00 Reader Service Contact Information ecallaghan@bizinfogroup.ca T: Toronto 416 442 5600 X 3538 Elsewhere -866-543-7888 Mail: Business Information Group Design Engineering Circulation Dept 80 Valleybrook Drive North York, ON M3B 2S9 Printed in Canada

36 Shop Talk Maximizing efficiency of negative load handling pays dividends.

38 Mechanical Art Hackers EatART Foundation’s mechanical sculptures combine artistic whimsy and engineering know-how to illuminate energy issues.

42 Fluid Power Roundtable 2013 Canada’s fluid power leaders discuss economic outlook, the skills gap and the evolution of the industry

32 Fluid Power & Controls Buyers’ Guide

2013 www.design-engineering.com

4-5-DES.indd 5

34

38

Cover: Mechanical engineer/ artist and eatART founding member, Charlie Brinson, riding atop the foundation’s 35-robotic snake, Titanoboa.

Photo by Michael J.P. Hall, www.michaeljphall.com

March/April | 2013

13-04-09 1:02 PM

6 EditorialViewpoint

Making the Grade

www.design-engineering.com

A

s spring approaches, there are a few things Canadians can rely on. The days will get longer, winter will slowly fade and the Conference Board of Canada will give the nation yet another D grade for innovation. For more than 30 years, the not-for-profit applied research organization’s annual report has consistently ranked Canada near the bottom in innovation compared to 15 peer industrialized countries.

While the outcome was predictably the same this year, the report was careful this time around to make clear that the low grade doesn’t mean Canada is somehow lacking in creativity or inventiveness. In fact, as far as the ideation and creation stage of the innovation process is concerned, Canada scores well. For example, in terms of the number of scientific articles published relative to population, Canada earned a B grade, beating out the U.S. and U.K. In addition, the quality of that research (i.e. how influential it was) also earned high marks, suggesting that the nation is a persistent source scientific advancement.

However, as in previous years, the problem is not with invention but commercialization. According to the report, Canada struggles in both protecting its intellectual property and bringing it to market. For example, the report notes that while total patents filed by Canadians has been improving, the numbers haven’t escalated as quickly other peer nations, leaving Canada in the same relative position. The same holds true for other metrics, including new firm density, public R&D spending and knowledge-based services.

In the final analysis, the report admits that there are no clear answers why Canada lags behind its peers, but it does suggest one possible major factor. The difficulty, it suggests, is financing. As in previous years, Canada scored poorly in terms of venture capital availability. According to Conference Board’s research, VC investment in Canada is only 0.031 per cent of GDP, nearly one third that of highly ranked countries like the U.S. (0.088 percent of GDP).

Added to that, a survey conducted by Conference Board’s own Centre for Business Innovation, found that a quarter of respondents said securing financing was their biggest challenge. The survey also found that innovative firms rely too heavily on internal cash flow during that fragile transition phase when a good idea has the potential to turn into a lucrative business opportunity. To correct the problem, the Board advocates that innovators look outside Canada for investors, get comfortable with being acquired and emulate the oil and gas industry’s approach to securing capital.

While the intent of the report is to spur change, it may ultimately be a selffulfilling prophecy. After all, half the battle of innovation is convincing others to take the financial risks inherent in developing, investing in or purchasing a novel product. However, if potential investors and/or customers are repeatedly told for more than 30 years that Canada is lacking—but we’re not sure why or how to fix it—it’s not surprising innovation struggles here. Perhaps a better approach would be to focus less on the report card-style shame and blame campaign and more on research-based advice that helps Canadian innovators succeed.

Mike McLeod

@

Publisher Alan Macpherson (416) 510-6756 AMacPherson@design-engineering.com Group Editorial Director Lisa Wichmann (416) 510-5101 LWichmann@canadianmanufacturing.com Technical Field Editor Pat Jones, P. Eng. Art Director Kathy Smith (416) 442-5600 ext. 3215 KSmith@plant.ca Market Production Manager Jessica Jubb (416) 510-5194 jjubb@bizinfogroup.ca Circulation Manager Cindi Holder (416) 442-5600 ext. 3544 CHolder@bizinfogroup.ca BIG Magazines LP Executive Publisher Tim Dimopoulos Vice-President of Canadian Publishing, Alex Papanou President of Business Information Group, Bruce Creighton Publications Mail Agreement #40069240 ISSN: 0011-9342 (Print), 1929-6452 (Online) Privacy Notice: From time to time we make our subscription list available to select companies and organizations whose product or service may interest you. If you do not wish your contact information to be made available, please contact us via one of the following methods: Phone: 1-800-668-2374 Fax: 416-442-2191 E-mail: privacyofficer@businessinformationgroup.ca.

Mail to: Privacy Officer, 80 Valleybrook Drive, North York, ON M3B 2S9 Subscriber Services: To subscribe, renew your subscription or to change your address or information contact us at 1-800-387-0273. Subscription Price: Canada: $52.95 for 1 year; $71.95 for 2 years; $10 for single copy. Outside Canada: $99.95 for 1 year; $22 for single copy. Directory/buyer’s guide: Canada $27; Outside Canada $45.

Design Engineering, established in 1955, is published 6 times per year except for occasional combined, expanded or premium issues, which count as two subscription issues. Published by BIG Magazines LP, a division of Glacier BIG Holdings Company Ltd. Tel: 416-442-5600, Fax: 416-510-5140 80 Valleybrook Dr., Toronto, ON M3B 2S9.

Contents of this publication are protected by copyright and must not be reprinted in whole or in part without permission of the publisher. DE receives unsolicited features and materials (including letters to the editor) from time to time. DE, its affiliates and assignees may use, reproduce, publish, re-publish, distribute, store and archive such submissions in whole or in part in any form or medium whatsoever, without compensation of any sort. DE accepts no responsibility or liability for claims made for any product or service reported or advertised in this issue. DE is indexed in the Canadian Business Index by Micromedia Ltd., Toronto, and is available on-line in the Canadian Business & Current Affairs Database. We acknowledge the financial support of the Government of Canada through the Canada Periodical Fund (CPF) for our publishing activities.

I enjoy hearing from you so please contact me at MMcLeod@design-engineering.com and your letter could be published in an upcoming issue.

March/April | 2013

6-7-DES.indd 6

Editor Michael McLeod (416) 442-5600 ext. 3231 mmcleod@design-engineering.com

www.design-engineering.com

13-04-09 1:11 PM

High speed, low-cost control with DirectLOGIC PLCs

H0-CTRIO2 (up to 250 kHz)

High-speed Counting / Pulse Output Module for DirectLOGIC DL05 and DL06 PLCs

H0-CTRIO2 $199.00

If you need precise counting or high-speed outputs for motion control in a low-cost form factor, DirectLOGIC micro PLCs are just the ticket for small projects. The new H0-CTRIO2 High Speed Counter I/O Module fits into an expansion slot on any DL05 or DL06 controller.

• Inputs for two up or down counters, or one quadrature encoder (250 kHz max) • Two high-speed inputs for edge timing, pulse catch, count reset/inhibit/capture or home search • Two configurable high-speed outputs or one channel pulse output control (20 Hz-250 kHz) step and direction, or clockwise (CW) and counter-clockwise (CCW) pulse outputs • Module operates asynchronously from the PLC/controller, so on-board outputs respond in real time to incoming signals The DL05/06 series of controllers are convenient mciro-bricks with 14 (DL05) or 36 (DL06) built-in I/O, plus expansion slot(s) for additional discrete, analog or specialty modules such as the high-speed counter. A DL05 unit with 8 inputs and 6 outputs starts at just $125.

Cut-to-length application uses high-speed output to cutter and encoder feedback to high-speed input for precise control PLC with H0-CTRIO2 module Motor interface Motor control lines Gearbox, clutch and brake interface H0-CTRIO2 high speed output

Encoder

Cutter interface

Material to be cut to length

Cutter assembly

For more details on this module and DirectLOGIC PLCs, visit:

http://bit.ly/0506spec www.automationdirect.com

Our shipping policies make it easier than ever to order direct from the U.S.!

6-7-DES.indd 7

Free standard shipping is available for orders totaling over $49 U.S. (except for orders which require LTL shipping, see Web site for details). Also, save on brokerage fees when shipping standard ground to Canada - allow AutomationDirect to choose the broker.

See Web site for details and restrictions at: www.automationdirect.com/canada

Go online or call to get complete information, request your free catalog, or place an order.

1-800-633-0405

13-04-09 1:11 PM

8 DesignNews

Canadian researcher’s coating to end smudgy touch screens

Q

ueen’s University chemists, Dr. Guojun Liu and Dean Xiong, announced the development of a fingerprintresistant coating that may soon be preventing smudges from accumulating on touch screens.

Inspired by the water-resistant microstructures of lotus leafs, the coating looks to be effective in repelling both waterand oil-based deposits from many surfaces, including glass, metals, wood, ceramics, plastics, fabrics, fibres and paper, the researchers say.

In addition to touchscreens, the coating could also be used for such things as graffiti-proofing walls and making ship hulls resistant to marine organisms, as well as for anti-icing and anti-fogging applications.

The coating’s developers are currently partnering with PARTEQ Innovations, the university’s technology transfer office, and Milton, Ontario-based paint-additive manufacturer, Lorama, Inc., to commercialize the “smart” coating

March/April | 2013

8-13-DES.indd 8

Dr. Guojun Liu (left) and his partner John Dupont, a post-doctoral researcher, examine a slide used to test their water- and oil-resistant coating. (Photo Credit: Rob Mooy-Kingston This Week)

technology. To help finance its commercialization, the Ontario Centres of Excellence (OCE) announced it is investing $200,000 in the Queen’s University innovation through its Collaborative Research program. www.oneinnovation.ca

www.design-engineering.com

13-04-08 1:47 PM

Providing custom products and value-added assemblies based on the most successful miniature pneumatic line in the world!

Wire leads to be 7” + 1/8” with crimped terminal 10258333-2

“Cleaned for Oxygen Service” internal components Stainless Steel coil housing

5-volt coil less than 0.5 watt

Brass base (no plating needed)

FKM seals

Mounting holes

1/2” max

Integrated needle valve for precise flow control

CUSTOM er

s n o i t u l o s

8-13-DES.indd 9

Toggle-operated manual by-pass valve in base

Clippard Instrument Laboratory, Inc. 513-521-4261

www.clippard.com/customsolutions Wainbee Ltd. 888-WAINBEE

www.wainbee.com

13-04-08 1:47 PM

DieQua offers 10 DesignNews more gearboxes plus application experience to help select the best one for your needs

Helical Gearmotors • 1-75 HP Capacity • Motorized or Adapters • Right Angle or Inline • Shaft Mount Designs • Multi-Stage Ratios • Modular Design

Worm Reducers • 7 sizes, 28-110mm CD • Fret-free Connection • NEMA or IEC Adapters • Coupling Input • Aluminum Housings • 2-Side Worm Support

Planetary Gearheads • Precision or Economy • Inline or Right Angle • 40-155mm Frames • Low Backlash • 1 and 2 Stage Ratios • Lubricated for Life

Servo Worm Gearheads • 3 Backlash Levels • Shafts or Hollow Bores • Single or Dual Outputs • 11 sizes, 25-200mm CD • Capacity: 10-7000 Nm • 20,000 Hour Ratings

Spiral Bevel Gearboxes • 9 Sizes • 1-250 HP Capacity • Low Backlash Option • Ratios from 1:1 to 6:1 • Output Shaft Options • Machined Housings

Special Designs • Add-On Options • Modified Dimensions • High Speed Applications • Special Environments • Special Duty Needs • Custom Designs

www.diequa.com 630-980-1133 March/April | 2013

8-13-DES.indd 10

See our complete product line!

MDA to 3D scan near-Earth asteroid The Canadian Space Agency awarded MacDonald, Dettwiler and Associates Ltd. a CAD$15.8 million contract for the preliminary design of a laser altimeter for NASA’s New Frontiers Program—OSIRIS-REx. Scheduled for 2016, the OSIRIS-REx mission plans to launch a spacecraft to near-Earth asteroid 1999 RQ36 where it will conduct photographic and x-ray imaging before setting down on its surface, collecting a sample and returning to Earth.

For MDA’s part, the aerospace company will be developing the OSIRIS-REx Laser Altimeter (OLA), a small on-board instrument designed to collect high density 3D point cloud data. The resulting topographical maps will then help the spacecraft navigate towards the asteroid and identify potential sample acquisition sites. In addition, the scanner is also intended to return the highest density 3D data of a small space body yet recorded. According to NASA, 1999 RQ36 is currently the most accessible carbonaceous asteroid and the most potentially hazardous to Earth. www.mdacorporation.com

Ballard signs research deal with Volkswagen Ballard Power Systems announced it has signed an agreement with Volkswagen Group for an engineering services contract to develop fuel cells for use in powering demonstration cars in Volkswagen’s fuel cell automotive research program. The contract carries a four-year term, with an option for a two-year extension. The expected contract value is in the range of CAD$60-100 million.

Work will involve the design and manufacture of a next-generation fuel cell for use in Volkswagen HyMotion demonstration cars. According to the company, Ballard engineers will take the lead in areas of fuel cell product design, including the membrane electrode assembly (MEA), plate and stack components as well as testing and integration work. www.ballard.com www.volkswagenag.com

Campagna Motors, BMW sign engine supply deal Exotic sports car maker, Campagna Motors, says it has signed an agreement with the BMW Group that will supply the Quebec builder of the T-REX and V13R with a steady supply of engines and R&D expertise. The agreement follows Campagna’s collaboration with Harley Davidson as engine supplier for the V13R. Based on the new engine supplier deal and increasing demand from American and Asian markets, Campagna projects it will double production over the next few years. www.campagnamotors.com www.design-engineering.com

13-04-08 1:47 PM

DesignNews 11 Phoenix Contact announces new regional sales manager Phoenix Contact announced the promotion of Martin Socha to the position of Regional Sales Manager for Western Canada. Socha joined Phoenix Contact in 2011 as an Process Industry Specialist and has over 12 years of industry experience both as an instrumentation technologist and sales consultant. www.phoenixcontact.ca

Martin Socha

Next-gen Canadian 3D-printed car looks to set world record Winnipeg-based engineering consulting firm, Kor Ecologics, and Stratasys’ RedEye On Demand additive manufacturing service division announced the two companies will collaborate to produce the URBEE 2, the first road-ready, fuelefficient car built using 3D printing.

Targeted to hit the road in two years, URBEE 2 builds on its predecessor that made headlines in 2010 as the first car to have most of its external body composed of 3D-printed parts.

According to Kor Ecologic’s president and senior designer, Jim Kor, the URBEE 2 will keep the hyper-fuel efficiency and 3D printed body of the original design but add the slick finish of a production vehicle.

Designed by Jim Kor of Kor Ecologics and built, in part, by RedEye On Demand, the two-passenger hybrid, URBEE 2, will hit the road in two years. (Photo: KOR EcoLogic)

According to the company, KOR EcoLogic’s team will design URBEE 2 in CAD, which RedEye On Demand will use to building the car’s exterior through Stratasys’ FDM process.

The finished two-passenger vehicle will comprise 40 large 3D- printed parts compared to hundreds of parts in the average car. The lightweight car will be designed to go 70 mph on the freeway, using a biofuel like 100 percent ethanol. The goal is for the URBEE 2 to drive from San Francisco to New York City on only 10 gallons of fuel, setting a new world record. www.urbee.net www.design-engineering.com

8-13-DES.indd 11

March/April | 2013

13-04-08 1:47 PM

12 DesignNews Neptec to develop cameras for ExoMars Rover Canadian space exploration engineering firm, Neptec Design Group (NDG), announced that it has signed a contract with Astrium UK Limited for the design and build of navigation cameras for the ExoMars Rover.

For its part, NDG will develop the vision cameras that will serve as the eyes of the rover as it explores the surface of Mars.

According to the company, the main challenge will be to design the cameras to withstand the extreme environmental conditions on the Martian surface.

In addition to the ExoMars mission, the company is currently also working on the Japanese Astro H satellite; guiding the Orbital Cygnus vehicle to the ISS in 2013; and designing rovers for a moon mission tentatively planned for 2018. www.neptec.com http://exploration.esa.int

Report suggests global wind resource potential over-blown New research conducted by Harvard University applied physicist David Keith, and funded by the Natural Sciences and Engineering Research Council of Canada (NSERC), suggests the amount of potential global wind power has been significantly overstated. On the surface, wind power would seem to be inexhaustible. However, according to Keith’s mesoscale atmospheric modeling research, wind power has a number of real-world limiting factors.

For example, previous estimates of large wind farm’s generating capacity assumed more turbines meant more power, approximately 2 to 7 watts per square meter. In reality, the drag of each turbine blade slows the wind and creates a “wind shadow”. As a result, very large wind power installations (larger than 100 square kilometers) may peak at between 0.5 and 1 watts per square meter.

In addition, Keith says other real-world constraints, like geography and economics, further limit the maximum capacity wind power could ultimately contribute to global power needs. For example, wind installations only make sense in locations with a constant wind supply while also being relatively close to where that electricity would be consumed.

To stabilize the Earth’s climate, Keith estimates the world will need to identify sources for several tens of terawatts of carbon-free power within a human lifetime.

“Wind power is in a middle ground,” Keith says. “It is still one of the most scalable renewables, but our research suggests that we will need to pay attention to its limits and climatic impacts if we try to scale it beyond a few terawatts.” www.seas.harvard.edu March/April | 2013

8-13-DES.indd 12

www.design-engineering.com

13-04-08 1:47 PM

3D printing means prototypes like these, that help product designers put their best foot forward.

WHATEVER YOUR GAME, 3D PRINTING IS GOING TO CHANGE IT. 3D printing means virtual inventories and low-volume production, which for manufacturers is the next big step.

They look like shoes. They feel like shoes. But they’re actually prototypes.

Printed layer by layer on a 3D printer. Every day, 3D printing rewrites another rule of

how things are made. 3D printers are at work in product design studios, engineering

departments and manufacturing plants. In schools and hospitals and dental labs.

Wherever speed, efďŹ ciency and accuracy matter. It is the next industrial revolution.

And Stratasys is here to lead it.

Come explore the game-changing possibilities of

a 3D World at Stratasys.com.

F O R A 3 D W O R L D TM Learn more at StratasysForA3DWorld.com Stratasys is a registered trademark of Stratasys, Ltd., registered in the U.S. and other countries.

8-13-DES.indd 13

13-04-08 1:47 PM

L

14 CADReport

Top 10 Trends in CAM CAM software continues to evolve to meet the competitive challenges facing manufacturers.

By Jeanné Naysmith, CIMdata

A

lthough NC programming systems date back to the 1960s, and are relatively mature, the NC or CAM Software market remains viable, and the underlying technologies employed continue to evolve. As a result, users are able to effectively support more complex and advanced machine tools, increase their productivity and produce higher quality parts.

The fundamental driving force for the growth in the industry over time is the intense worldwide competitive environment being faced by manufacturers. It commands continuous improvements in processes, operations, methodology, technology and a culture that meets and exceeds expectations.

Concurrently, the number of skilled and experienced workers is on the decline. At the same time, Using CAM software to simplify the programming of complex MTM machines owners and shareholders insist on steadily increas- is viewed as the dominant trend by NC software providers. Here, GibbsCAM is ing revenues and profitability. Manufacturers are used to center drill a part on the main spindle while another part is being turned caught in this confluence of forces that places an simultaneously on the sub-spindle with a tool from the rear gang. onerous squeeze on shop owners, managers, planners and workers to compete in a global economy.

One way in which producers are addressing this demand- Trend 2: 5-axis Machining—Simultaneous 5-axis machining environment is to increase their purchases of more ing has been used for many years in applications such as advanced and complex machine tools to lower costs, improve aerospace and turbine blade manufacture. However, its use quality and shorten turnaround times. As manufacturers add is increasing significantly across many application areas, more advanced and complex tools—while programming is including moldmaking, as it is replacing the use of 3-axis being performed more by casual users including machine milling in a number of situations. operators—the requirement for efficient and effective software This is occurring because, with 5-axis machining, more to control these tools continues to increase. complex geometries can be machined; the number of setups The primary objective in CAM software is to improve pro- and tool changes can be reduced; shorter cutting tools can ductivity and product quality by producing software that is be used to reduce vibration and tool breakage; manual posieasier to learn and use, more automated, more process-oriented tioning can be eliminated; there can be an avoidance of and more tightly integrated with other elements of PLM, PDM, electrical discharge machining (EDM) that eliminates the digital manufacturing and factory automation software. There need for electrodes; and in-process inventory can be reduced. are no revolutionary changes being introduced—all existing Moreover, the price of 5-axis machines is declining, and newer NC software products will produce acceptable results—but 5-axis programming software is easier to learn and is more the evolution in technology continues. Ten of the key industry automated. trends, as observed by CIMdata, are summarized below: Trend 3: High-Speed Cutting and Use of Advance Toolpaths— Trend 1: Greater Use of Multi-Task Machines—Machine High-speed machining has become accepted, as most shops tools are now often multi-functional, multi-spindle, multi- now employ this technology. The software to support this turret and/or multi-axis. CIMdata is aware of machines in capability must provide for fast and efficient transfer of data; production with as many as 22 axes. These tools are becom- smooth tool movement that minimizes any sudden change in ing increasingly complex to program and utilize. The intro- direction; a constant chip load to maximize the life of the duction, acceptance and support of this type of machine tool cutter; tangent surfaces without gaps or overlaps; and support are viewed by most NC software providers as the single most of those machine tool features necessary to produce gouge-free, dominant trend in the industry. high-surface finish parts.

March/April | 2013

14-19-DES.indd 14

www.design-engineering.com

13-04-09 1:37 PM

If y con

Low Cost Vacuum Generators For Lifting, Clamping, Mounting, Vessel Evacuation and “Pick and Place”!

E-Vac® Vacuum Generators are compressed air powered vacuum pumps that provide instantaneous response and are most commonly used for pick and place operations.

These single stage vacuum pumps are a low cost venturi available in a variety of sizes and flows along with a selection of vacuum cups suitable for a wide range of applications.

• • • •

Compact, portable Instantaneous vacuum up to 27"Hg Easy to mount at point of use Engineered for high efficiency to minimize compressed air usage

Adjustable E-Vac® Vacuum Generator

Modular E-Vac® Vacuum Generator

Adjustable E-Vac vacuum generators permit easy adjustment by simply loosening the locknut and turning the exhaust to increase or decrease the level of vacuum and vacuum flow. Four models are ideal for porous and non-porous applications.

Modular E-Vac vacuum generators use a compact block design for convenient mounting which is ideal for use on existing machinery. Fourteen models for porous and non-porous applications are available.

Scan for quick video access

WATCH THE VIDEO! www.exair.com/53/48053.htm

In-Line E-Vac® Vacuum Generator In-Line E-Vac vacuum generators are cylindrical and compact. They can be threaded directly onto a compressed air line or held in place with a mounting clip.

Fourteen models for porous and non-porous applications are available.

Vacuum Cups, Fittings, Tubing, & More EXAIR can provide the accessories you need to build your vacuum system.

If you would like to discuss an application, contact an Application Engineer at

www.exair.com/53/480.htm Manufacturing Intelligent Compressed Air® Products Since 1983 11510 Goldcoast Drive • Cincinnati, Ohio • 45249-1621 • (800) 903-9247 fax: (513) 671-3363 • E-mail: techelp@exair.com • www.exair.com

14-19-DES.indd 15

@EXAIR

13-04-08 1:53 PM

16 CADReport Machining is sometimes done on actual surfaces as opposed to tessellated surfaces to obtain a higher quality output. However, quality problems sometimes occur with high-speed machining, as the material can overheat, cracks can develop, and the material can move. Nevertheless, use of high-speed cutting has become necessary for shops to remain competitive and all CAM software providers offering products to these industry segments, such as mold and tool and die, must effectively support this technology.

Trend 4: Further Utilization of Feature Technology—To enhance programming automation, feature technology—a knowledge-based machining methodology—is becoming increasingly common. Features not only define shape, but also include associative operations that describe the preferred method for cutting and inspecting the features on CNC machines.

By employing this technology, part features—such as faces, splines, various types of holes, bosses, slots, profi les and pockets—can be created in design, automatically recognized and then automatically machined and dimensionally inspected.

Feature technology improves ease of use by having decisions made within the software rather than by a user.

Feature recognition software is a relatively new and important capability to automatically examine a design model; identify individual features and their associated attributes; convert design features into manufacturing features; and extract the features for subsequent operations.

Machining intelligence can be built into a CAM system and a predefined set of machining rules and user preferences can be applied to a feature. By evaluating part geometry and material, the software selects the most appropriate tools and operations, establishes the operational sequences for a specific

Feature Based Machining, as in this Mastercam generated toolpath, is increasingly being implemented in CAM software to eliminate the manual processes involved in identifying features on solid parts.

feature, recommends machining strategies, calculates feeds and speeds, and then automatically generates the NC code for cutting and the CMM code for inspection.

Software is also able to capture processes and learn the preferred methods for manufacturing different parts, and then apply these techniques to the programming of subsequent parts or part types. As such, a user’s NC programming preferences are utilized by invoking these sequences when a feature is recognized.

A CNC programmer can also fine-tune a program as desired.

If a design change occurs, the revised model can be imported, and automatic feature recognition software will associate the new model with the original features. When features are revised, changes are made only to the specific machining parameters that are different from the original solid.

Our fans will blow you away!

40% in energy savings with diagonal fan technology Toolless installation Nema 12 Out-of-the-Box Reversible air flow ENCLOSURES ENCLOSURES

14-19-DES.indd 16

POWERPOWER DISTRIBUTION DISTRIBUTION

CLIMATE CLIMATE CONTROL CONTROL

13-04-08 1:53 PM

CADReport 17 Trend 5: Introduction of Process-Focused Software—NC programming software is evolving from the use of basic instructions to being more process-focused. A process-focused approach considers the full needs of a specific type of user.

To create application processes, programming wizards are available to lead a user through the necessary programming steps. Each solution incorporates different machining strategies and parameters appropriate to the task. Processes can be viewed as a feature and much of the feature-based methodology can be applied to processes. Users can also customize the software to enhance a process.

As part of a process, CAM software permits manufacturers to capture and re-use their best practices. Libraries of machining strategies tailored to best practices can be established from machining rules, templates, knowledge and feature-based machining. A set of machining rules can be defined by users based on the material, part geometry features and the operations to be performed.

Alternatively, strategies or processes can be captured, catalogued and stored as templates, and then applied to current and future machining tasks. By utilizing best practices, machining methods can be kept consistent, process variables are minimized, quality is enhanced, lead time is shortened and programming time can be reduced substantially.

Trend 6: Modeling Enhancements—Evolution in modeling technology continues as it does in NC programming. For example, hybrid modelers are becoming increasingly common.

They allow users to work with wireframes, surfaces and feature-based 3D solids within a single environment. A hybrid approach takes the burden from the user, since a user does not see a difference between a surface and a 3D solid.

E ROL CONTROL

IT INFRASTRUCTURE IT INFRASTRUCTURE

Trend 7: Advanced CMM Software—Use of CMMs (Coordinate Measuring Machines) for dimensional inspection is relatively common. Initially, all programming was manual, but over time CNC systems, software and other capabilities have been introduced to automate the process.

PAS CMM is a new software product that offers further automation by employing feature technology, automatic feature recognition and the use of advanced analysis tools to evaluate a CAD part model. Code is generated in standard CMM formats, so that hard coding for every machine is avoided.

The three basic steps in PAS CMM are automatic feature extraction; automatically defining the inspection process based on the features; and use of an annotation tool to specify the form of the report required for specific features. The CMM program can be simulated and verified in a virtual machine environment and then transferred to a CMM inspection machine.

Trend 8: Emergence of More Realistic Simulation—Significant improvement is being made in software for machine simulation, toolpath verification and rendering. Realistic simulation of the entire machining process including the machine tool, holders, machine components, cutting tools and stock can be made to provide a user with a complete picture of a machining operation.

Simulation of a toolpath is provided to verify its accuracy.

Collisions, gouges, undercuts and any discrepancies between the target part and the machined part are shown. By comparing an in-process model with the designed part, the amount of remaining material can be displayed. Rendering software provides for photo realistic images of the machined part. The verification and simulation software is becoming more highly integrated with the toolpath generation software. Visualiza-

SOFTWARE SOFTWARE & SERVICES & SERVICES www.rittal.ca

14-19-DES.indd 17

13-04-08 1:53 PM

18

CADReport tion of processes is becoming increasingly important for programmers, planners and machinists.

Additionally, as machine tool controllers become more powerful, more functions including simulation can be performed in a controller. Machine simulation can occur during actual machining and a look-ahead function can be provided to detect collisions before they occur so machining can be halted.

Trend 9: Provider Consolidation—The CAM market continues to be highly fragmented and competitive with more than 50 providers worldwide competing for market share, but the herd is thinning. In the recent past, companies such as Cimatron, Delcam and Planit Holdings have acquired other CAM software companies to gain market share, broaden product offering, obtain unique technologies and increase their sales distribution network.

Trend 10: CAM as a Component of PLM—PLM has emerged as a broad-based and rapidly growing software technology that now encompasses a number of technologies that were once viewed as independent entities, such as CAD, CAM, CAE, PDM and digital manufacturing. CAM and CAD/CAM are now often considered by users as a component or components of a broader PLM implementation. This has led to further data integration among PLM components. The major PLM providers (Dassault

Modules like VoluMill, here running inside Siemens PLM’s NX CAM, optimize high performance toolpath generation for high speed machining applications.

Systèmes, Siemens PLM Software and PTC) all offer CAM within their PLM environment. CAM, CMM and other factory floor software systems are also included within digital manufacturing solutions being used by manufacturing engineers.

DE www.cimdata.com

Jeanné Naysmith is the Manufacturing Practice Manager for PLM research firm, CIMdata. This article was adapted from CIMdata’s 2012 NC Market Analysis Report.

3D ENGINEERING SERVICES

AN EXTENTION OF YOUR BUSINESS. > Mechanical Engineering > Advanced Surfacing > Reverse Engineering > Numerical Simulation (FEA/CFD) > Consulting Services

R

co

w

t

3D. ENGINEERING. DESIGN. SIMULATION.

418.833.4446

March/April | 2013

14-19-DES.indd 18

www.creaform3d.com

www.design-engineering.com

13-04-08 1:53 PM

Others say they’re FAST...

But do they have the

SCALE to deliver?

Proto Labs’ entire operation is optimized to deliver quick-turn CNC

Puzzled by resin choices?

Request your FREE Resin Puzzle — nine of the most common thermoplastics used in injection molding. Visit

www.protolabs.com/parts to request your design aid.

Enter code DE13B.

machined and injection molded parts in as fast as one business day.

We manufacture parts every day for thousands of customers, many of whom come to us at the last minute with dozens of designs they need to test ASAP. Since 1999, we’ve produced tens of thousands of molds, and shipped tens of millions parts to our customers all over the world.

Sure, it’s our technology that allows us to make your parts faster than anyone else. We back it up with large-scale global manufacturing facilities with hundreds of CNC machines and injection molding presses on three separate continents.

Whether your project calls for a few machined parts or thousands of molded parts from 50 different designs—we have the scale to meet your needs. Every time!

Check out our virtual tour!

Visa/Mastercard Accepted © 2013 Proto Labs, Inc

14-19-DES.indd 19

Call 877.479.3680 or visit www.protolabs.com ISO 9001:2008 Certified • ITAR Registered

13-04-08 1:53 PM

20 CADBeat

When Extreme Sports Meet CFD Creaform’s scanning system and computational fluid dynamics expertise push back the speed limits in street luge.

olders of the Guinness speed record in street luge (157 km/h), enthusiasts from Québec City decided to take up a new challenge: Pass the symbolic mark of 100 mph with no engine. Among these thrill seekers was Louis-Étienne Bouchard, account manager at Creaform.

“Our luge team, The 3 Bobs, broke the world speed record in September of 2008, and we came very close to the 100 mph at that time,” he says. “Since then, we have tweaked our gear, but we had a hard time figuring out how to improve the aerodynamics of our luges to gain even more speed.”

Louis-Étienne and his teammates asked Creaform’s digital simulation team to help them out. The goal: Using CFD to simulate airflows to reduce the aerodynamic drag and break their very own speed record.

Step 1: 3D Scanning To digitally simulate flows, you first need a computer model of the object. In this case, a representation of the surfaces in

Step 3: Analysis and Recommendations CFD analysis of the fluid model provided data on the flow behaviour of any point on the calculation volume, which makes it possible to calculate with precision the aerodynamic shapes on the body, as well as the air particles.

“By calculating the CFD from the real scanned geometry, we were able to identify several ways to increase the top speed,” explains Creaform fluid dynamics specialist Steve Julien. “We found that—with a new profi le on the rear of the luge and by modifying the position of the luge racer—it was possible to limit the zones of high pressure while reducing the flow recirculation zones.

“We also found out that the suit created a lot of rugosity at the legs and increased unnecessary chafing,” Julien adds.

“Thanks to the modifications we made, we were able to easily gain between 5 to 10 km/h. The high accuracy of the scanning fi le generated with the portable scanner turned out to be very helpful, as it provided us with a wealth of information that we would not have had otherwise.”

Step 4: Breaking the Record…Nearly On June 18, 2012, current Guinness record holder Cédric Touchette laid on his new and more aerodynamical luge, ready to rush down the famous Éboulements hill, located in the Charlevoix area of Quebec. During a practice before the race, officially monitored by the Guinness records organization, mechanical issues arose.

“The wheels started to vibrate and my luge

contact with air was the only thing required, and so it was essential to get the exact 3D reconstruction of the luge racer in sliding position. This was accomplished using a Handyscan 3D handheld portable scanner, developed by Creaform.

Step 2: Fluid Mesh The surface mesh generated was then used as a starting point to define the air volume around the object to be analyzed.

Later, this was divided into several small elements to create the fluid mesh. In this case, the fi le was made of 3 million elements. Using the Navier-Stokes equations—which arise from Newton’s second law when applied to fluid motion—flow characteristics, such as speed, pressure, temperature and turbulence level, were calculated for each of these elements.

to wobble,” Touchette says. “I got pulled off to the left, and I saw the concrete wall coming in on me. When you’re rolling that fast, it is really scary. I’m done chasing records for now.”

Still, during that “slow” practice race, the thrill seeking Touchette still peaked at 152 km/h, just shy of his 100 mph goal.

“I’m still convinced that the new luge could break the record,” Creaform’s CFD specialist Julien insists, “but I’m not reckless enough to throw myself down that hill to prove it!”

DE

By Pier-Olivier Duval, ing.

H

March/April | 2013

20-21-DES.indd 20

www.creaform3d.com

Pier-Olivier Duval is the FEA/CFD team leader at Creaform. www.design-engineering.com

13-04-09 12:56 PM

DMR_Es

DMR_EssentialComponents_September-2011-outline_01.indd 1 20-21-DES.indd 21

8/15/2011 12:43:40 PM 13-04-09 12:56 PM

22 MotionControl

Integration in Motion

By Alexa Loiskandl, Myostat Motion Control

W

hen selecting an integrated motor for your system, it’s important to understand the range of options available to ensure you are selecting the best motor for the job. By definition, integrated motors combine separate elements to provide a harmonious, interrelated whole. While this definition is accurate, it provides little insight into what elements are being combined, how they work together or how to choose one type over another.

An integrated motor combines the motor, encoder, driver and controller in a single programmable unit. When compared to a non-integrated servo system, where the driver and controller are external to the motor housing, this configuration typically takes up less space and uses fewer wires.

Recently, Myostat was approached by an integrator for a large North American electronics manufacturer looking to automate a specific portion of their manufacturing process.

Prior to the automation, staff were required to hand-screw components together at multiple work stations. Automating this process would require servo driven actuators, in an X-Y configuration, executing quick moves along with a high level

Chosen wisely, integrated motors offer a step up in price, programmability and performance. of accuracy and repeatability. We recommended a small integrated closed-loop motor with multiple programmable I/O ports and communication abilities. It was able to control the motorized screw driver and the signal LEDs, as well as provide an Ethernet interface for quality control data acquisition—extensively running the entire machine.

To complete the automation process, a second motor was required to move two small linear actuators in a synchronized manner, in that they brought a jig together, squarely fastening circuit boards together prior to inserting the fasteners. Air cylinders could not provide the level of coordination required and therefore an integrated open-loop motor, which incorporated a captive screw actuator, was selected. This integrated motor does not have a high level of programmable intelligence but accepts simple commands and is available at a lower price point than a closed-loop motor.

The main components affecting cost and performance are illustrated in the chart below. This matrix describes typical options and available choices across the spectrum of integrated motor offerings from various manufacturers.

Current products on the market represent a subset of the total permutations illustrated in the chart.

An integrated motor was the solution in both instances cited above; however, very different configurations were selected.

The motors were chosen based on price, programmability and performance and used for different tasks with very different outcomes. Engineers who understand the range of options available “under the hood” of integrated motors and how they affect functionality will have greater success designing a system to suit their application, budget and desired performance.

DE www.myostat.ca

Alexa Loiskandl is a sales engineer with Myostat Motion Control and a recent graduate of Carleton University with a B.Eng in Biomedical and Electrical Engineering.

March/April | 2013

22-23-DES.indd 22

www.design-engineering.com

13-04-08 1:54 PM DEX full page

CHOOSE FROM TWO GREAT LOCATIONS! May 7 - Coquitlam, British Columbia - NEW! October 30 - Mississauga, Ontario

A one day tabletop show highlighting the latest design and manufacturing technologies for the OEM market An effective forum for face-to-face interactions where engineers, product developers, machine builders and systems integrators can discuss, network, solicit advice and ‘kick the tires’ on the latest technologies and applications that drive your business.

Featured technologies include: • CAD/CAE • additive manufacturing • reverse engineering • motors • drives • motion control • automation • fluid power• power transmission • adhesives & fasteners … and much more

FREE admission for ALL attendees!

Registration is required:

www.DEX2013.com Exhibit sales have started and space is filling quickly!

To discuss exhibit and sponsor options, contact: Alan Macpherson Publisher 416-510-6756 dex@design-engineering.com

22-23-DES.indd 23 DEX full page ad 2013.indd 1

13-04-08 1:54 PM 13-04-05 12:02 PM

24

IdeaGenerator Automation Digital Positioning Controller Maxon launched its EPOS3 70/10 EtherCAT, a digital positioning controller designed for real-time positioning of synchronized multi-axis systems. The controller possesses a nominal power supply voltage range from 11 to 70 VDC and delivers a continuous output current of 10A, and up to 25A during acceleration and deceleration. Designed for DC brushed and brushless motors with a power range up to 700W, the controller integrates as slave into real-time EtherCAT protocol-based Ethernet networks.

Digital inputs/outputs (11/5) can be configured as reference or limit switch as well as Capture or Trigger, or can be used to activate holding brakes with definable ON/OFF switching delays. www.maxonmotorusa.com

Pocket PLC Galil Motion Control announced its RIO-47300, the latest product in the company’s RIO Pocket PLC Series. Digital inputs and outputs on the PLC are increased from 16 to 24 each for a total of 48 optically isolated digital I/O. The RIO allows 400 program lines, 254 variables,

March/April | 2013 7PLNT15928.indd 1

24-29-DES.indd 24

1000 array elements, 6 PID control loops and 5 Ethernet handles.

Other standard features include PID process control loops, timers, counters, web interface, e-mail alerts, data-logging and the ability to read position and temperature sensors. www.galilmc.com

Motors Brushless DC Motor Groschopp Inc. introduced an updated Brushless DC (BLDC) motor and several gearmotor combinations. Due to the lack of wear components, the BLDC motor has a life of 20,000 hours or more, the company says. With an outside square dimension of 73.3 mm (2.88 in) to 90.2 mm (3.55 in) the brushless motor is available in two sizes and a variety of voltages: 12, 24 and 163VDC/115VAC. According to the company, BLDC motors possess a higher starting/stall torque and more horsepower, compared to AC induction motors. The BLDC motor is designed using standard 120° Hall Effect switches; a control is required for the BLDC motor to commutate. www.groschopp.com

www.design-engineering.com 3/20/07 12:32:48 PM

13-04-08 3:22 PM

24-29-DES.indd 25

13-04-08 3:22 PM

26 IdeaGenerator ECPM Motors NovaTorque Inc. announced that its family of Gen2.0 PremiumPlus+ Electronically Commutated Permanent Magnet (ECPM) motors are being made available in high speed 3hp and 5hp 2400 rpm (maximum speed 3600 rpm) models. Also available in 3hp and 5hp 1800 rpm models (maximum speed 2700 rpm), NovaTorque motors utilize ferrite magnets in a fluxfocusing design to deliver the efficiency of rare-earth permanent magnet motors.

Driven by variable frequency drives, the motors provide motor-only-rated point efficiencies of 93.0 and 92 percent for 3hp and 5hp versions respectively. Additionally, unlike induction motors, the ECPM motors maintain their efficiency and torque over a broad speed and load range. www.novatorque.com

Tin-Can Stepper Motor Nippon Pulse introduced its PFCU30 integrated geared stepper motor.

With a standard 3/25 gear ratio, the tin-can stepper provides up to 100mN•m of holding torque and has a destruction torque of 300mN•m. In comparison, Nippon Pulse’s PJP28 (NEMA11) hybrid stepper motor comes with a maximum holding torque of 90mN•m. Like most NEMA11 hybrid stepper motors, the PFCU30 has a 1.8-degree step angle and a 0.9-degree half-step angle. It also features 200 steps per revolution, a resistance of 5.6 ohms, an inductance of 2.1mH, and a starting pulse rate of 365pps. www.nipponpulse.com

Torque-Arm Reducer Baldor Electric Company introduced a line of shaft mount right-angle beltless Motorized Torque-Arm (MTA) reducers in a range of 7 sizes from 3 to 100hp and torque ratings up to 130,000 inch/lbs. The reducer mounts in multiple positions and is designed for areas where standard belt driven reducers won’t fit. The MTA reducer features the patented Dodge twin tapered March/April | 2013

24-29-DES.indd 26

www.design-engineering.com

13-04-08 3:22 PM

IdeaGenerator 27 bushing system that provides a concentric grip of the driven shaft on both sides of the reducer. Engineered to perform in harsh conditions, the MTA features excluder seal technology and has a -40 F to +300 F temperature range. www.baldor.com

Servo Gearboxes AutomationDirect introduced its SureGear PGA series of precision servo gear reducers. The series is offered in a concentric shaft design with a maximum five arc-min backlash rating. The in-line planetary gear reducers are available in four gear ratios (5, 10, 15, 25:1) and feature thread-in mounting with industry-standard mounting dimensions. Additional features include helical-cut planetary gears and uncaged needle roller bearings. Mountable in any direction, the PGA series is maintenance-free with no need to replace the grease for the life of the unit, the company says. www.automationdirect.com

Motion Control

bus or EtherCAT (via a gateway converter) communications is also available. The DGII series is available in 60 mm (2.36 in.), 85 mm (3.35 in.), 130 mm (5.12 in.) and 200 mm (7.87 in.) frame sizes with a maximum torque of 50 N m (440 lb-in.) and is able to handle up to 400 N (900 lbs) of permissible thrust load and high moment loading. www.orientalmotor.com

Power Transmission Clamping Shaft Collars Ruland Manufacturing Co., Inc. has expanded its quick clamping shaft collar line to include sizes up to 3 inches and 75 mm. They are designed for light duty stationary or low-RPM applications that require quick positioning adjustments or frequent set up changes. When installed, the handle sits flush with the outside diameter making them suitable for rotating applications. The design features a tension-adjustment screw which makes the collar compatible to shaft tolerances. All Ruland shaft collars have tightly controlled face-to-bore perpendicularity. www.ruland.com

Rotary Stages Aerotech announced improvements to its AGR series motorized rotary stages that feature accuracy to 20 arc seconds, with 8 arc seconds bi-directional repeatability, 30 rpm maximum speed and 360° continuous or optional limited travels. Tilt error motion is 10 arc seconds, axial error motion is 5 µm, radial error motion is 10 µm and maximum axial load is to 425 kg. The stages now feature a larger clear aperture, available from 50 to 200 mm diameter. The AGR stage base is fabricated from an aluminum alloy and is designed with two high-precision angular contact bearings.

Options include brush, brushless and stepper motor selections. www.aerotech.com

Hollow Rotary Actuator Oriental Motor introduced its DGII series, a hollow rotary actuator featuring the company’s AR Series closed-loop motor. In addition to the pulse input type package, a built-in controller (stored data) type package with I/O, Modwww.design-engineering.com

24-29-DES.indd 27

March/April | 2013

13-04-08 3:22 PM

28 IdeaGenerator Flange Collar Stafford Manufacturing Corp. unveiled its Heavy-Duty Flange Collar that features wider construction and oversize clamping screws to provide up to three times the axial load capacity. The mounting collar incorporates the company’s Accu-Clamp non-marring clamping feature machined into a perfectly square mounting flange. Providing flatness and perpendicularity to < 0.001 TIR, the flange collar is available in one- and two-piece styles machined from aluminum, steel, stainless steel and other alloy steels. Bores sizes can range from 1/2” to 6” I.D. and flanges up to 14” O.D. with drilled and tapped holes in customer specified patterns. www.staffordmfg.com

Sensors Photoelectric Sensor SICK launched its WTB4 MultiLine Photoelectric sensor that uses specially designed optics to create two line-shaped light spots to continuously detect objects with large gaps or product that is shiny or dark from leading to trailing edge.

The WTB4 features Aurora-Where_the_Action_Is:Aurora 11/5/10 2:27 PM PageSICK’s 1

third-generation custom ASIC, which incorporates OES3 technology to provide background suppression. With OES3 technology, these sensors are able to ignore shiny targets, detect multi-colored objects and offer ambient light immunity, the company says. www.sickusa.com

Pressure Data Logger Omega rolled out its OM-CP-PR140, a pressure data logger designed for use in autoclave validation and mapping. The device can withstand temperatures up to 140°C (284°F) and is completely submersible (IP68). The data logger’s stainless steel pressure gauge has an accuracy of ±0.03 Bar (±0.435 psi), at a temperature range from 20 to 140°C (68 to 284°F). The OM-CP-PR140 can be programmed to take readings as often as once per second and has non-volatile memory that can store up to 32,700 measurements. www.omega.ca

Electrical Floormount Enclosures Rittal announced its Floormount TSFM, the latest addition to the company’s TS8 Freestanding family of modular enclosures. The

Rod Ends and Spherical Bearings designed and manufactured to Aurora's exacting standards for quality and durability.

Registered and Certified to ISO-9001 and AS9100.

From economy commercial to aerospace approved, we've got it all !

Aurora Bearing Company 901 Aucutt Road Montgomery IL. 60538 Complete library of CAD drawings and 3D models available at:

w w w . a u r o r a b e a r i n g . c o m March/April | 2013

24-29-DES.indd 28

www.design-engineering.com

13-04-08 3:22 PM

IdeaGenerator 29 TSFM has the internal punched frame of TS8 line but comes assembled with 12-inch high removable legs.

In addition, the pre-installed exterior skins are made of 14-gauge (2mm) steel and are internally fastened. For the mounting of internal devices, the TSFM is equipped with a full-size, depth-adjustable, zinc-plated mounting panel. Rittal’s TSFM is available in three standard configurations: NEMA 12, NEMA 3R and Flange Mount Disconnect versions. www.Rittal.ca

Solid State Relays Carlo Gavazzi released its RGC2 and RGC3 series of 3-phase switching solid state relays and contactors,designed for switching resistive and inductive loads and are UL listed as motor controllers.

They feature integrated overvoltage protection, high I2t ratings and immunity conformance to industrial standards. RGC2, the 2-pole switching device, offers current ratings of 25, 40 and 75AAC per pole at 40°C. The 3-pole switching RGC3 offers five current ratings ranging 20 to 65A per pole. www.gavazzionline.com

DesignSolutions The domestic source for perfect meshing timing belts and pulleys BRECOflex CO., L.L.C. is announcing their new pulley catalog “B216” for made-to-order and stock pulleys. The new domestic “CNC” state of the art pulley manufacture allows for very precise machining standards, leading to superior product quality and quick product availability. BRECOflex CO., L.L.C., is providing finished precision pulleys made-to-specification and stock pulleys with pilot bores, for immediate delivery. Made-to-order pulleys are available with normal backlash, reduced backlash “SE” or zero backlash “0” tooth gap design.

Contact: info@brecoflex.com Visit us at: www.brecoflex.com

Ideas To Improve Production Efficiency! Look to Seal Master Inflatable Seals.

Sealing is just one of many tasks for custom-built, fabric-reinforced elastomeric inflatable seals. Simple, versatile and with close tolerance capability, they’re ideal for use as actuators, brakes, valves, clutches, wipers and for other innovative applications. Backed by in-depth technical/customer service, they’ll replace cumbersome, hard-to-maintain proccessing and handling components to lessen downtime. Ask about our RSVP Design Assistance program Contact: info@sealmaster.com Visit us at: www.sealmaster.com

Dust Collectors NEW - Full Line Literature Guide This impressive NEW guide outlines dozens of N.R. Murphy dust collectors, installations, capacities, styles and models. A must for any reference library. N.R. Murphy Limited has been in business over 70 years and has thousands of satisfied customers. “Dust Collectors are all we do; so get it done right the first time.

Just Ask the Experts.”

Contact: 4nodust@nrmurphyltd.com Visit us at: www. nrmurphy.com

Clippard Offers Miniature Pneumatic Products Catalog for Scientific/Medical Applications A leader in miniature pneumatics, Clippard provides the scientific/medical industry a variety of products and solutions. The product range is illustrated in a color brochure featuring the most complete line of miniature fluid power products for the medical, pharmaceutical analytical and dental fields. To get your copy today please visit our website at the address printed below.

Contact: sales@clippard.com Visit us at: www.clippard.com/scientific-a

To advertise your solution in this section call Alan Macpherson at 416.510.6756 www.design-engineering.com

24-29-DES.indd 29

March/April | 2013

13-04-08 3:22 PM

30 CanadianInnovator

A New Kind of Military Charge Bionic Power’s PowerWalk knee brace provides wearable electric generator for gadget-laden soldiers.

March/April | 2013

30-31-DES.indd 30

By David Godkin

A

B.C.-based company has developed a device that harnesses the marching power of soldiers to operate night vision goggles, radios, navigation gear and other battlefield equipment. The lightweight, mechanical PowerWalk brace recharges equipment batteries carried by soldiers as they walk and is designed to overcome problems using other “energy harvesting” devices now in use, such as hand-operated cranks.

“It’s very difficult for anybody to crank long enough to produce an appreciable amount of power,” says Bionic Power CEO Yad Garcha. “Our device is on the knee and as long as you’re walking, you can be producing power.”

Garcha says the “elegance” of the PowerWalk system stems from its use of the negative energy that occurs in the hamstring as the human leg decelerates or brakes. Instead of dissipating into heat, that negative energy is turned into electric power—as much as 12 watts of electricity on average, or enough to power four cell phones. He adds that military users are increasingly turning to ways of recharging a single large battery rather than forcing soldiers “to carry umpteen kinds of different batteries that are not rechargeable.”

With a targeted design weight of 800 grams, PowerWalk will also be lighter than the five to seven kilograms of Double A batteries that Canadian soldiers currently carry during a mission. To accomplish this, Bionic Power is re-engineering the brace’s gear box to reduce its width, which will also make it smaller and less cumbersome.

“For the solider, we figure we can reduce the envelope and width by half going forward,” says Garcha.

“The device is especially beneficial in reducing the fatigue and injury that can occur when soldiers walk downhill. We make a material difference to the soldier’s fatigue by reducing the metabolic effort. It takes them less effort to go downhill using our device than it would if they were not using it.”

Critical to a soldier’s mission on the battlefield is silence, something PowerWalk facilitates through a combination of plastic and metal gears to make the device quieter. “Eventually, we’ll also introduce a mechanical clutch so that we can completely disengage if the soldier needs to go into quiet mode.” Much of www.design-engineering.com

13-04-08 2:33 PM

CanadianInnovator the device’s usefulness also depends on where a soldier is fighting. In Afghanistan, 24- and 72-hour missions where Canadian soldiers walked a great deal were quite normal. In Iraq, energy harvesting devices would have been less useful because U.S. soldiers fought in urban settings and mostly traveled in personnel carriers.

Uphill Battle Soldiers themselves have been helpful in identifying and solving real time challenges associated with the PowerWalk system.

Garcha and his colleagues had not been told, for example, that soldiers often have to drop into full squat positions. This turned out to be difficult to do while wearing the brace.

“When you do a full squat, you’ll notice your thighs expand by an inch to an inch and a half,” Garcha explains. “We had rigid braces, so it didn’t work and we had to go back to square one. It took us another year to sort that out. ” Another challenge is how to distribute the power across the soldier’s body using PowerWalk’s centralized battery system.

Admits Garcha, “That is not something that has been sorted out to everyone’s satisfaction.” Wireless distribution “is just not on,” he adds, but wiring to distribute both data and power could be located inside the soldier’s uniform. Another possibility is combining Powerwalk with a backpack developed in the

31

U.S. equipped with lightweight solar panels and sewn into a soldier’s uniform. That device moves up and down as a soldier walks and is capable of producing up to 10 watts of power.

Fewer batteries using the PowerWalk system will mean a considerable cost savings to the U.S. and Canadian armies.

Another savings is to the environment. Rechargeable batteries eliminate the need to bury batteries when they run out of power.

But the key remains how soldiers in the field respond to the device, notably how the brace feels and looks. “We need to make it attractive and the soldiers needs to understand we will not hinder any movement,” says Garcha. “We can’t slow them down.”

These and other issues are much closer to being resolved now that Bionic Power has secured contracts with the U.S. Army through its Natick Soldier Research, Development and Engineering Center and funding from Defence Research and Development Canada (DRDC), the Canadian Forces’ science agency. But Garcha says it’s been a slog. Small military design companies struggle to attract investment dollars and survive in Canada, especially on the west coast.

“But the end users have come around to realize they need to have this developed, so they’re supporting us.”

DE www.bionic-power.com

David Godkin is a Victoria, B.C.-based freelance writer.

Caps • Plugs • Grips Masking • Protection Finishing

aMsp MAKES IT EASIER Martin

to find leveling foot mounts for industrial applications. Martin manufactures foot mounts in a variety of materials that provide vibration isolation and are suitable for washdown.

• Free 3D CAD models.

• Outstanding customer support.

• Request your free catalog today!

www.design-engineering.com

30-31-DES.indd 31

Tel: (516) 302-0152 amspsupport@amsp.biz www.allmetricsmallparts.com

www.mocap.com

sales@mocap.com

800.633.6775 409 Parkway Drive • Park Hills, MO 63601 March/April | 2013

13-04-08 2:33 PM

32

FluidPower Contents 34 Fluid Power News Festo launches robotic dragonfly, the BionicOpter, at Hannover Messe

36 Negative Load Maximizing efficiency of negative load handling pays dividends.

38 Mechanical Art Hackers Mechanical sculptures combine arts and engineering know-how to illuminate energy issues.

Fluid Power & Controls BUYERS’ GUIDE

2013

March/April | 2013

32-33-FP-DES.indd 32

42 Fluid Power Roundtable ‘13 Canada’s fluid power leaders discuss economic outlook, the skills gap and the evolution of the industry.

44 Fluid Power Showcase The latest in hydraulic and pneumatic product technology.

49 Fluid Power Product Index 51 Fluid Power Product Listings 63 Fluid Power Supplier Listings

www.design-engineering.com

13-04-09 1:36 PM

9534-22

9534-22 Oil Sands Canada_DE_7.875x10.75.indd 1 32-33-FP-DES.indd 33

2/4/13 11:07 13-04-08 2:34 AM PM

34

FluidPower: News

Festo Flies BionicOpter at Hannover Messe B

uilding on the work of the SmartBird debuted in 2011, Festo officially launch its latest flying creation, the BionicOpter, at Hannover Messe in April. With a wingspan of 63 cm and weighing in at 175 grams, the robotic dragonfly mimics all the forms of flight as its natural counterpart, including hovering, gliding and manoeuvring in all directions.

This is made possible, the company says, by the BionicOpter’s ability to move each of its four wings independently, as well as control each wing’s amplitude, frequency and pitch.

Including its actuated head and body, the robot exhibits 13 degrees of freedom, which allows it to rapidly accelerate, decelerate, turn and fly backwards.

“This unique way of flying is made possible by lightweight construction and the integration of functions: components such as sensors, actuators and mechanical components, together with open- and closed-loop control systems, which are installed in a very tight space and matched accurately to one another,” explained Dr. Heinrich Frontzek, Festo’s head of corporate communications and future concepts.

In total, nine servomotors actuate the BionicOpter’s wings.

The first, positioned in the base of its main body housing, regulates the frequency of the wing beats, which can be varied between 900 to 1200 times per minute (15 to 20hz).

Additionally, four motors (one at each joint) independently control each wing’s amplitude—or how far it travels per beat—to anywhere between 80 to 130 degrees of deflection.

Each wing can also be rotated up to 90 degrees to control angle of attack and allow the BionicOpter to fly forward and backward. To save on weight, the robotic insect’s head and body actuation relies on four shape memory alloy structures that move the head side to side and the tail to move vertically.

March/April | 2013

34-35-FP-DES.indd 34

The wings of Festo’s BionicOpter are actuated by nine servomotors that work in concert to independently control their frequency, amplitude and pitch.

To coordinate movement and provide flight stability, the BionicOpter is equipped with a series of inertial, positional and acceleration sensors that record wing position and orientation as well as the tilt, speed and direction of the dragonfly’s flight. That recorded flight data is then evaluated in real time by its on-board ARM microcontroller, which calculates all the parameters that can be adjusted mechanically.

According to the company, the robotic dragonfly’s wings are composed of carbon fibre rods reinforcing a polyester membrane, while its main body is a combination of aluminium as well as sintered polyamide and ABS plastic. Two 7.6-volt lithium polymer batteries supply power, and an integrated wireless receiver allows the dragonfly to be remotely piloted by smartphone.

Like all of Festo’s robotic creations, the BionicOpter is the product of the company’s Bionic Learning Network, a research partnership between the company, universities and development companies, that focuses on creating industrial technology based on design principles drawn from nature.

DE

L

www.festo.com/bionic www.design-engineering.com

13-04-08 2:39 Less PM is more_Desi

Less is more PPS cushioning has revolutionized the world of standard cylinders. Self-adjustingâ&#x20AC;&#x201D;cleanâ&#x20AC;&#x201D;safe, for faster installation and immediate start-up. The self-adjustment eliminates the need to think about load and speed change. PPS will take care of that for you.

Festo Inc. Tel: 1 877 GO FESTO Fax: 1 877 FX FESTO festo.canada@ca.festo.com www.festo.ca/en/pps

34-35-FP-DES.indd 35 1 Less is more_DesignEngineering.indd

13-04-08 4:42:07 2:39 PM 21/03/2013 PM

36 FluidPower: ShopTalk

Negative Load In the design of open- or closed-loop circuits, maximizing efficiency of negative load handling pays dividends.

By Pat Jones, P.Eng, Strictly Hydraulics

W

ith the ever-increasing focus on energy efficiency in all facets of power transmission and control, there is a huge opportunity to take all the good things that fluid power brings to the table with the ease of the transmission and control of power, and accentuate it with higher efficiency.

In previous articles, I’ve discussed the distribution of fluid power from the pump to the load and how this can be done more efficiently by minimizing throttling losses—closed-loop circuits being the most efficient since there are no throttling losses in the main circuit.

There is another key aspect that needs to be dealt with and that is limiting the energy used and/or recovering the energy from the load in a negative load state. A negative load state occurs when the load is being lowered and/or decelerated. The challenge is to reduce energy input and recover as much energy as possible. For this article, I will focus on reducing energy input and waste during lowering/deceleration of the load.

When lowering the load (i.e. driving downhill, lowering a press platen), the best-case scenario would let gravity do all the work. However, we can’t just let the load free fall uncontrolled without the ability to catch it at some point and decelerate it; otherwise, we would damage the machine. This is where inefficiency gets introduced.

In most applications, the load must be controlled throughout the complete lowering motion to accomplish the desired position and speed control as well as prevent shock loading from deceleration at the end of travel. In the case of an openloop circuit design, the exhaust from the actuator goes back to tank and there is no resistance to the load running away.

Consequently, we need to incorporate either meter-out flow control (for speed control only) or counterbalance pressure control (if load holding is also required).

In both these scenarios, resistance at the exhaust port of the actuator is created that must be overcome by the pump in order to move the load properly. So, there are two losses here: Fluid forced across the flow control or counterbalance valve wastes energy (flow x pressure = power), in this case, as heat. The resistance generated by these valves means that resistance builds back to the pump, which requires increased power input to the pump. In this case, we are wasting energy to control the load being pulled down by gravity, which doesn’t make much sense.

One new valve on the market goes part way to addressing both energy-wasting issues in open-loop circuits. Sun Hydraulics has developed a counterbalance valve with “Load Match Technology” that adjusts its set pressure to always be 1.3 times March/April | 2013

36-37-FP-DES.indd 36

the load. Traditional counterbalance valves are typically set at 1.3 times the maximum load. As a result, when the load is light, there is considerable energy wasted. If the counterbalance valve can self-adjust then, when the load is light, less heat is generated throttling across the valve and less power is required by the pump to lower the load.

For a load ranging from 500 to 3000 psi, this would net roughly an 80 percent decrease in the energy lost when lowering the light load. The valve also requires approximately the same pilot pressure to open regardless of load, meaning the power input from the pump is the same for light or heavy loads. Unfortunately, the energy wasted throttling across the valve when lowering a heavy load would remain unchanged.

Although significant energy is saved with this valve, there is still a lot of energy wasted in an open-loop circuit when lowering the load.

Bi-Directional Control Now, let’s come back to the closed-loop circuit design as the most efficient hydraulic circuit for variable-speed, bi-directional control. In the case of a negative load situation, the pump and motor swap rolls; the load turns the motor into a pump, which drives fluid to the pump. In turn, the pump now acts like a motor, which adds power to the prime mover.

This type of circuit is very efficient when lowering the load because there are no throttling losses. However, this circuit will only work if the prime mover (engine or electric motor) has the capability to absorb the energy of the load without over-speeding.

So we can see that open-loop circuits don’t offer much in the way of energy efficiency when compared to closed-loop circuits—either in the distribution of power to the load or in load control during negative load situations.

However, although individual closed-loop circuits make financial sense for some more high-powered applications, small closed-loop circuits used to run individual actuator circuits are not cost effective with current components.

Research is being done on this front, which potentially holds the key to drastically increasing circuit efficiency beyond the current state of the art. It is foreseeable that many more hydraulic circuits will be closed-loop as we strive for higher circuit efficiency in all applications.

DE www.cfp.ns.ca

Pat Jones, P.Eng. is the Technical Service Manager for Strictly Hydraulics and an IFPS Certified Fluid Power Specialist with over 20 years of hands-on experience in the fluid power industry. www.design-engineering.com

13-04-08 2:40 PM MIC02d Ga

Tight space is not a problem when you choose Gates MegaSys® products for your equipment.

The MegaSys line meets the needs of today’s high-powered, high-pressure hydraulic equipment.

As part of an integrated solution, the constant pressure spiral-wire and wire-braid hose and coupling products offer flexibility, durability and performance.

And, you can find Gates MegaSys products at your local Motion Canada location. Our local sales and service specialists are experts in application and technical support, providing the parts and the know-how you need to stay up and running.

Over 50 locations More than 4 million products Industrial maintenance training courses Call. Click. Visit.

The brands you count on from the people you trust…that’s Gates and Motion Canada.

1-800-526-9328 for the location nearest you ©2013 Motion Industries, Inc.

MIC02d 36-37-FP-DES.indd Gates DE ad FVA.indd 37 1

MotionIndustries.com

13-04-08 3/8/13 3:09 2:40 PM PM

38

CoverStory

The eatART Titanoboa team with their robotic creation.

(Photo by Michael J. P. Hall, Framwerk Photography + Design inc.)

Mechanical Art Hackers Vancouver’s eatART foundation, and its mechanical sculptures, combine artistic whimsy and engineering know-how to illuminate energy issues.

By Mike McLeod

A

t the Consumer Electronics Show in Las Vegas this past January, while attendees perused the latest gadgets inside, those outside the annual event clamored around two mechanical beast: a car-sized, eight-legged walking machine called the Mondo Spider and Titanoboa, a 35-foot-long robotic snake.

Both mechanical sculptures are the work of Vancouverbased eatART (Energy Awareness Through Art). Composed of young artists, mechanical engineers and fabricators, the non-profit arts research foundation is part Maker Movement and part environmental advocacy plus a generous portion of Burning Man-style artistic expression.

“From the beginning, eatART has drawn attention to alternative ways of generating and using energy that are compatible with a sustainable future,” says eatART co-founder Leigh Christie. “That driving force motivates our team members to create these massive projects that probably wouldn’t have been done otherwise.”

Connected by Cardan joints, the Titanoboa’s 20 vertebrae are actuated by 40 proportional hydraulic cylinders and coordinated by a series of Arduino controllers. (Photography by Ben Z Cooper).

March/April | 2013

38-41-DES.1.indd 38

Mondo Spider In part, the story of eatART, and its creations, began in 2006 with a small group of University of British Columbia engineering graduates: Charlie Brinson, Leigh Christie, Jonathan Tippett, Alex Mossman, Sam Meyer and Ryan Johnston.

Inspired by reality shows like Junkyard Wars, the group organized a local version of the competition to create a walking machine. That original mechanical collage of wood, bike parts and door hinges traveled only 20 feet before collapsing; however, their initial success—plus encouragement and start-up capital from Brinson’s father, Dillard Brinson—inspired the band to try something more robust and stylized.

That inspiration became a car-sized, eight-legged walking machine called the Mondo Spider. After extensive modeling in Solidworks and MATLAB, the group secured a grant from the Burning Man arts festival and a workspace in Vancouver’s Great Northern Way Campus, donated by eatART co-founder and video game entrepreneur, Rob Cunningham. With the help of numerous volunteers from the area’s universities, the expanding group fabricated the 1,700-lbs. Mondo Spider in time to creep its way onto Nevada’s Black Rock Desert in August 2006.

“It took about six, very frantic months, to build,” recalls eatART founding member, Charlie Brinson. “There’s no precedent for it, so we were making many decisions on the fly.”

For all its seeming complexity, how the Mondo Spider works is relatively straightforward, Christie says. The most complex part—coordinating the walking machine’s eight legs—relies on the work of inventor Joe Klann and his six-bar linkage made up of pivot joints that convert rotating motion to linear.

Each pair of legs (front and back) is connected to a central input crank and set one-half cycle out of phase with each other.

With each 180-degree turn of the input crank, the grounded leg travels forward (or backward) in a straight line. At the same time, the opposite leg is raised the off the ground to a predetermined height before returning to the starting position.

By timing the four pairs of legs (two pairs on each side) 90 www.design-engineering.com

13-04-08 3:27 PM MIC02C Eato

When the job calls for hydraulic muscle, Eaton hydraulic systems keep our customers one step ahead of the competition.

On-road, off-road, agriculture, mining, marine, industrial—even on the lawn and in the garden— when the task requires reliable, efficient, cost-effective hydraulic muscle, Eaton delivers with engineered solutions you can count on.

And, you can find Eaton hydraulic systems and components at your local Motion Canada location. Our local sales and service specialists are experts in application and technical support, providing the parts and the know-how you need to stay up and running.

Over 50 locations More than 4 million products Industrial maintenance training courses Call. Click. Visit.

The brands you count on from the people you trust…that’s Eaton and Motion Canada.

1-800-526-9328 for the location nearest you ©2013 Motion Industries, Inc.

38-41-DES.1.indd 39 MIC02C Eaton DE ad FVA.indd 1

MotionIndustries.com

13-04-08 3:27 PM 3/8/13 3:08 PM

40

CoverStory “After the 2010 upgrade to an electric battery for the Mondo Spider, I committed myself to make the giant snake project happen,” Brinson recalls. “I had just read somewhere that the fossils of a 50-foot snake had been discovered in Columbia. It seemed a good fit because we’d call our machine Titanoboa as a reincarnation of this ancient beast that was killed off by climate change.”

As with the Mondo Spider, the first step was proving it could be done. In the fall of 2010, Brinson started work with then-Swiss Federal Institute of Technology (ETH Zurich) student, Federico Augugliaro, to create the EatART co-founder and mechanical engineer, Leigh Christie, driving the 1,700-lbs Mondo Spider at mathematical models, early mechanVancouver’s 2010 Winter Olympic’s CODELive event. The 8x8x5-foot walking machine’s arachnid ical design and FEA analysis. gait is govern by a 6-bar linkage invented by Joe Klann. (Photo by Andi Miah) Unlike the Mondo Spider, however, Brinson says Titanoboa degrees out of phase with each other, the Mondo Spider always required significantly more complicated controls and multihas four feet on the ground to keep the frame and rider relatively disciplinary expertise to create. Constructed from high-strength parallel to the ground, but the trip isn’t always smooth. aluminum, the robotic snake’s motion replicates that of its “The whole project really highlighted the value of the wheel,” namesake—twisting the length of its body back and forth. says Brinson, who also works as a reliability engineer for BC Its 20 vertebrae are connected by Cardan universal joints and Hydro. “The Mondo Spider’s linkage is optimized for a flat grouped into 5-vertebrae modules that each function as an footpath, but with every cycle of the leg, it still bobs up and down independent system. Each module is controlled by an Arduino by an inch and a half. We would always joke about how we were micro-controller that takes inputs from 10 valves to control 10 being foiled by ‘Bob’ who caused our components to fail.” proportional hydraulic cylinders—two per vertebrae.

Constructed from mild steel, the Mondo Spider was originally In turn, each module communicates with the others as well powered by Honda VTwin engine, which has since been replaced as with the robot’s central controller in the head. A driver operby a 16 cell, 48V lithium iron phosphate battery. Each side of ates the electrically powered robot by wireless remote. the walking machine is driven by an independent hydraulic “The way real snakes work, their belly scales have a texture system designed by Alex Mossman and regulated by hand- that gives them a differential friction coefficient that makes it operated proportional valve. twice as easy to slide forward than side-to-side,” Brinson says.

By manipulating the valve levers, a driver can move forward, “For our machine, we put polyethylene rollers under each verbackward or skid-steer the Mondo Spider like a tank. At top tebrae that allow it to slide forward but only slightly side-to-side.” speed, the mechanical beast tops out at a brisk walking pace of Although the wheels worked well on hard, flat surfaces, it was 4 ft/sec but relies on its 1,180-ft-lb of maximum torque to keep less successful on the desert floor at Burning Man 2011, he adds. its 8 x 8 x 5-foot frame moving.

Since then, the group has been working to upgrade Titanoboa “We have a 90-to-1 gear ratio in our hydraulic system,” says to fulfill the project’s original vision.

Christie, who is also founder of Vancouver-based consulting For example, to give it more versatility, mechanical engineer firm, MistyWest Engineering. “Imagine trying to get that in a and eatART core contributor, Hugh Patterson, designed belly pure electric system. You’d need to have some kind of gear box scales and approached ProtoLabs to rapid prototype them from and the ones we looked at were very expensive and heavy. The slick polyethylene resin. Impressed by the project, the company other advantage of is that hydraulics are very aggressively on-off donated 100 of the artificial scales, which the team is in the systems; so when you slam your hand on the lever, you instantly process of installing. In addition, Brinson says they will be addfeel that power.” ing the final 10 vertebrae this summer to bring Titanoboa to its intended 50-foot length and programming other modes of snake Titanoboa motion including caterpillar, concertina and sidewinder.

With the completion of the Mondo Spider and its viral noto“Jon Tippitt’s 5-meter-tall walking machine, Prosthesis, is riety following Burning Man 2006, Christie, Brinson, Tippett, our next big thing,” Christie says. “Beyond that, the organization’s Cunningham and others decided to join forces to formally future is clear. We have created this independent artistic lab, but establish eatART on the Great Northern Way Campus as we want to expand beyond our own organization. There are all fabrication facility and exhibition space. In the following these other islands of awesomeness around the world, and we years, the organization continued to tour its projects, until want to reach out to them.”

DE Brinson conceived the group’s next big thing. www.eatART.org March/April | 2013

38-41-DES.1.indd 40

www.design-engineering.com

13-04-08 3:27 PM

38-41-DES.1.indd 41

13-04-08 3:27 PM

42 FluidPower: Roundtable

Fluid Power ROUNDTABLE

2013 Canada’s fluid power leaders discuss the economic outlook, the skills gap and the evolution of the industry.

Conducted by Mike McLeod Design Engineering: For many fluid power companies, 2012 was a healthy sales year. How does 2013 look?

John Lamb, Industry Segment Manager - Natural Resources, Festo Canada: From our perspective, I would say there is a cautious optimism. Sales have steadily grown since the bottom fell out in 2008/2009, but the global situation still affects our customers. For me especially, dealing with the natural resources side, the ups and downs of commodity prices really affect how companies plan their projects—if they go ahead with them or put them on hold. From that perspective, the economy isn’t going great, but it isn’t negative.

Alan Wheatley, Account Manager, Hydraflow-Pumptech: I would agree with that: Cautious optimism. As a distributor, we rely on small manufacturers and the MRO market. What we’re finding, especially over the last year, is a trend toward re-building and fi xing existing product in the field, rather than buying new product, due to apprehension over where the economy is going. So our service work has increased over the last 12 months, and we continue to see that trend even

now. But, so far as purchases of new packages and systems to supplement new builds are concerned, that has been flat for our company.

Ted O’Donnell, Regional Manager - Ontario, Bosch Rexroth Canada: “Flat” was the word I was going to use as well. There doesn’t seem to be a whole lot of significant growth going on but it’s not negative either, just steady. At the same time, we hear how bad things are going in Europe, but despite all of the other bad news, Canada seems to be steadily humming along.

Tony Bucci, Global Accounts & Food & Packaging Manager, SMC Pneumatics Canada: As you all know, Canada sells close to 75 percent of our wares to the U.S., and we live and die by our one large customer. When we say flat, I think there is still a bit of an incline. And I agree 100 percent on the refurbishment trend.

Not long ago, you’d see blank checks for brand new production lines. Now, it’s “We have this line and we want it re-configured.”

However, for new equipment, there is a huge push to design lines for flexibility, where it has to be easily configured for new products or increased production. But, I’ve got admit that our business has been okay; nothing to complain about. We’re hopeful 2013 will be another good year for our business.

“When the downturn happened, a lot of companies had to restructure and re-examine their own organizations. The currency markets changed for Canada as well, while the resources and commodity prices were going through the roof. So the switch happened very quickly from Central Canada to Western Canada. In my mind, they are just starting to build the infrastructure for the next 20 to 30 years.”

– John Lamb, Industry Segment Manager - Natural Resources, Festo Canada March/April | 2013

42-45-FP-DES.indd 42

www.design-engineering.com

13-04-09 12:55 PM

FluidPower: Roundtable 43 “We don’t really have fluid power competing against other technologies; we have a merging of technologies. So you don’t talk about fluid power and motion control; you talk about motion control that includes fluid power. They are all crossing boundaries and becoming merged into one another.”

– Ted O’Donnell, Regional Manager - Ontario, Bosch Rexroth Canada DE: Following on that topic, what other trends are you seeing in the industry?

Bucci – SMC: John [Lamb] will tell you, it’s resources. Look at what’s going on in Alberta. Fort McMurry is a community the size of Richmond Hill but look at the billions that are being poured in there.

Wheatley – HFPT: I don’t think we’ve seen the top end of that either. Our company is Ontario-centric, so I can’t really contribute to national patterns, but I think there will be some future opportunities for fluid power in just Saskatchewan alone as well as the ongoing expansion in Northern Alberta.

There’s a lot of work that needs to be done to give everybody

www.design-engineering.com

42-45-FP-DES.indd 43

the sense that the safety and the environmental sides are being taken into consideration, but that doesn’t negate the fact that it’s creating a lot of jobs for Canadians and business opportunities for national companies.

Lamb – Festo: To me, it was almost like a switch went off.

When the downturn happened, a lot of companies had to restructure and re-examine their own organizations. At the same time, the currency markets changed for Canada as well.

A lot of the OEM business that happened in Southern Ontario, the traditional automotive manufacturers, weren’t competitive all of a sudden. At the exact same time, the resources and commodity prices were going through the roof. So the switch happened very quickly from Central Canada to Western

March/April | 2013

13-04-09 12:55 PM

44

FluidPower: Roundtable

Canada. In my mind, they are just starting to build the infrastructure for the next 20 to 30 years. It’s only going to get bigger and better. The oil sands is only one example; there’s also liquid natural gas and even the wood industry.

O’Donnell – Bosch: Mining has been very strong as well.

Here in Ontario, we’ve been losing the manufacturing base over the last few years, while natural resources out west increased as well as further east. The mobile market, from our perspective, is very strong across Canada in mining, farming and forestry.

DE: The skills shortage is an issue for many employers.

How are fluid power companies like yours dealing with the challenges of finding qualified candidates?

Wheatley – HFPT: Not very well. Education opportunities in fluid power have really diminished over the last few years. What happens is that people go to university and look to land a glamorous, well-paying job immediately. But fluid power isn’t deemed a “cool” industry. As a result, enrolment for traditional fluid power courses has diminished. Eventually colleges and universities have to drop the course all together or, like at Centennial College, they meld it with an automation course.

Consequently, getting the skill set now, especially on the service and engineering side, is very difficult. The unfortunate thing is, when people do become available, it costs a lot of money. You have to make decisions about whether or not to train a new hire for your type of business. That takes time, and everybody needs return on investment; they would like that new hire to start making money for the company right away.

Bucci – SMC Pneumatics: I’m on the PAC steering committee for Centennial College. They are trying to identify the trends and are putting in new courses. There is still a very good Robotics/Automation & Fluid Power Program; they’re trying to offer more instrumentation and motion control; and the hydraulics labs are still there. At the end of the day, though, when you have younger students, mostly men, many don’t develop the needed skills before they attend college.

However, they do gain an understanding of the course subject matter and are exposed to some hands-on skills. Centennial College has always been our pool for hiring. But when we do the career nights there, of the 30 or so graduates coming out, you’ll only get a handful of bright bulbs who you get a good vibe from.

Centennial is also now catering to foreign students, approximately 50% or greater, and I don’t know how many of them will stay in Canada. But it goes beyond the education: Learning those handson skills as a kid just isn’t available today.

O’Donnell – Bosch: The trend for our industry has followed a progression from mechanical to hydraulics and now its electronics and motion control. The schools have followed that trend and educated their students to meet it. Hydraulics isn’t a particularly glamorous industry, so people went from fluid power-based only to robotics or mechatronics. We’ve lost that fluid power-only person, which may or may not be a problem, because the evolution of our industry is in that direction.

Lamb – Festo: I agree. Industry doesn’t want just fluid power people. They want someone who can program a PLC, run a robot and work on fieldbus devices as well as work on hydraulic and pneumatic systems. I think the technology has lead the way. Twenty or thirty years ago, it was just a valve and a coil; now, you have full fieldbus devices, variable speed controls and everything is included, so you do need that one person who has multiple talents. That’s why mechatronics has become increasingly popular.

DE: How is the fluid power industry evolving as it faces competition from other technologies?

O’Donnell – Bosch: We don’t really have fluid power competing against other technologies; we have a merging of technologies. So you don’t talk about fluid power and motion control; you talk about motion control that includes fluid

“Education opportunities in fluid power have really diminished over the last few years. What happens is that people go to university and look to land a glamorous, well-paying job immediately.

But fluid power isn’t deemed a ‘cool’ industry. As a result, enrolment for traditional fluid power courses has diminished.”

– Alan Wheatley, Account Manager, Hydraflow-Pumptech

March/April | 2013

42-45-FP-DES.indd 44

www.design-engineering.com

13-04-09 12:55 PM

FluidPower: Roundtable 45 “Not long ago, you’d see blank checks for brand new production lines. Now, it’s ‘We have this line and we want it re-configured.’ However, for new equipment, there is a huge push to design lines for flexibility, where it has to be easily configured for new products or increased production.”

– Tony Bucci, Global Accounts & Food & Packaging Manager, SMC Pneumatics Canada

power. They are all crossing boundaries and becoming merged into one another. For example, you have intelligent devices that may be a hydraulic device but has a motion controller on it.

Wheatley – HFPT: I think this links to the point Tony [Bucci] made originally about the flexibility that motion control provides to adapt to future requirements. It may cost a bit more money to integrate an intelligent device at the moment, but if I look 18 months down the road, the flexibility of that device will require less investment when the time comes.

Also, energy savings has been a big part of the direction that fluid power manufacturers have been going. Historically, hydraulic devices have been relatively simple and couldn’t compensate for power requirements. Now, both mobile and

industrial components have become more intelligent and effectively reduce power consumption, which reduces operating costs.

Lamb – Festo: One negative trend I see is that global manufacturers of fluid power equipment generally make their products to a global standard. However, when you come into a specific region of the world, you have to meet specific requirements. The CSA is a good example. It doesn’t impose the same requirements as UL in the U.S. That puts a tremendous strain on companies to meet a very specific regional requirements.

It also makes it difficult to bring innovative products into Canada because the certification is antiquated and based on 30-year-old technologies. There are associations talking about this topic, but the government has to own this.

DE

Renum Hydraulics Your Source for...

Power Packs which deliver exceptional performance

– 0.25 to 15 hp.

– tanks 0.5 to 18 gallons – vertical and horizontal orientation

Since the combinations of Pumps, Valves, Tanks and other components are too numerous to describe, we invite you to contact us for a solution that both fits your budget and the application.

Renum Hydraulics Ltd. 200 Wilkinson Rd. #11 &12, Brampton, Ont. L6T 4M4 • Tel: (905) 457-6754 • Fax: (905) 457-1656

www.design-engineering.com

42-45-FP-DES.indd 45

March/April | 2013

13-04-09 12:55 PM

46 FluidPower: Showcase Pumps Axial Piston Pumps HAWE Hydraulics has added the V60N-130 axial piston pump to its V60N series, all of which have displacement volumes up to 8 in3 /rev as well as working pressures of up to 5800 psi and peak pressures of up to 6500 psi.

The V60N-130 is designed for high pressure and high volume. The pump also offers a built-in performance controller and is 5 inches wide to fit in small spaces. Overall, the company’s axial pump line feature load-sensing systems, where hydraulic consumers with different pressure levels and/or variable volume flows have to be supplied.

Load-sense controls enable the hydraulic solution to support the energy efficiency of mobile machines and compliance with such emission regulations as Tier 4 and Euro 6. www.haweusa.com

Diaphragm Metering Pump KNF introduced its FMM80 solenoid-driven diaphragm metering pump capable of dispensing liquids accurately in adjustable volumes between 30 μl/stroke and 80 μl/stroke. The pump can be driven with single impulses to deliver discrete micro-volumes

or can be operated with a pulsed signal at a frequency up to 10Hz to provide continuous flow rates up to 48 ml/min.

According to the company, the FMM80 pump offers a service life of more than 500 million strokes and integrates patented noise-suppression. In addition, the pump remains flow-tight in both directions with pressures of 14.5 PSIG at rest and exhibits stability against varying pressure. It also comes with a selection of available head materials (PP, PVDF, EPDM, FFPM, or PTFE) to enable the transfer of virtually all liquids. www.knfOEM.com

Valves and Sensors High Flow Valves Clippard released its Minimatic Electronic valves that provide an airflow of 1.4 scfm at 100 psig, more than twice the flow of Clippard’s EC/EV/ET valve series. Optional 1.1 scfm at 50 psig and 0.95 scfm at 25 psig flow models are also available. The valves are precision-built, 2-way normally-closed control valves, utilizing a valving principle with no sliding parts. Complete 5002MP_3.375x4.875 OEM

stand apart from the herd Select Master Bond adhesives for improved performance and reliability

• Widest choice of formulations • Latest technology • Deal direct – no distributors

Hackensack, NJ 07601 USA • +1.201.343.8983 • main@masterbond.com

www.masterbond.com March/April | 2013

46-47-DES.indd 46

www.design-engineering.com

13-04-08 2:41 PM

FluidPower: Showcase poppet travel is 0.007-inch. Manifold and in-line mounting are available as well as many different electrical connection styles. Oxygen clean and analytical versions are also available as well as FKM, EPR and silicone seals and diodes. www.clippard.com

47

with 90 psi air pressure. Internal safety valves prevent loss of air pressure and gripping force. In addition, the Systec chuck features a precision-ground body, hardened to 62HRc. Accessories include spindle adapters, soft and hard-top jaws, grease gun, a manual directional-control valve and a dual foot-operated valve. www.lexairinc.com

Cylinder Position Switch Automation Direct announced that its NITRA line of pneumatics products now includes nine styles of position switches for pneumatic cylinders, including round, dovetail, t-slot, square and D-shaped. Additional dovetail accessories are available to accommodate larger dovetail slots.

The styles are solid-state electronic switches available in normally-open 3-wire DC PNP and NPN configurations, and can be purchased with an M8 wiring connector or 3-meter integral cable with wire leads. Mounting bands with adapters for round body cylinders are available ranging from 1/8-inch to 4-inch sizes. www.automationdirect.com

Components Jaw Chuck Lexair introduced its Systec front-actuated, pneumatically powered jaw chuck. The selfcontained air-open/air-close chucks are available in five sizes from approximately 5 to 12 inches. The drawtube-free design offers through-hole capacity up to 4.52 inches, with more than 18,000 lbf grip force at 1000 rpm for the largest size. Systec master-jaw/top-jaw chucks are available with inch or metric serrations in all sizes. Most sizes are available in two-, three- or four-jaw configurations. The four-jaw design can be used as a two-jaw. Using an adapter plate, the chuck will fit A5 to A11 spindle faces.

The Systec chuckâ&#x20AC;&#x2122;s non-rotating air manifold uses Teflon seals and operates www.design-engineering.com

46-47-DES.indd 47

Specialists In: Eaton Hydraulics & Power Management Sauer-Danfoss Motion Control

Berendsen Fluid Power UpdatedV2.indd 1

| 2013 March/April 3/16/11 12:04:49 PM

13-04-08 2:41 PM

48-61-FP-DES.2.indd 48

13-04-09 1:15 PM

ProductListings ProductIndex Accumulators: Bladder 51 Accumulators: Diaphragm 51 Accumulators: Non-Separator 51 Accumulators: Piston 51 Accumulators: Spring-Loaded 51 Actuators: Electric 51 Actuators: Linear-Electric 51 Actuators: Linear-Hydraulic 51 Actuators: Linear-Hydraulic-Servo 51 Actuators: Manual 51 Actuators: Rotary Hydraulic 51 Actuators: Rotary Pneumatic 51 Actuators: Solenoid 51 Adaptors & Mounts, Motor 51 Adaptors & Mounts, Pump 51 After-Coolers 51 Air Breathers 51 Air Compressor Oils 51 Air Logic Devices 51 Air Operated Hydraulic Pumps 51 Bladders 51 Blowers: Centrifugal 51 Blowers: Positive Displacement 51 Blow Guns 51 Brakes: Hydraulic 51 Brakes: Pneumatic 51 Bumpers 51 Can Bus Systems 51 Clamps, Hose & Tube & Pipe 51 Closures, Caps & Plugs 51 Clutches: Pneumatic Tension Control 51 Compressors: Air-Diaphragm 51 Compressors: Air-Oil-Less 51 Compressors: Air-Reciprocating 51 Compressors: Air-Rotary Screw 51 Compressors: Air-Rotary Vane 51 Compressors: Centrifugal 51 Compressors: Distribution Systems 51 Connectors, Electric 51 Contamination Control 51 Controllers: Electro-Hydraulic 51 Controllers: Electro-Pneumatic 51 Controllers: Flow 51 Controllers: Hydrostatic Drive 51 Controllers: Motion 51 Controllers: Programmable Logic 51 Controls: Electro-Hydraulic 51 Controls: Electronic 52 Counters: Fluidics 52 Counters: Hydraulic 52 Counters: Particle 52 Counters: Pneumatic 52 Couplings: Air Self Sealing 52 Couplings: Flexible Shaft 52 Couplings: Fluid Self Sealing 52 Couplings: Oil Self Sealing 52 Couplings: Quick Disconnect 52 Couplings: Rotating Swivel 52 Cylinder Accessories 52 Cylinders: Adjustable Stroke 52 Cylinders: Air/Oil 52 Cylinders: Cable 52 Cylinders: Clamping 52 Cylinders: Composite (Pneumatic & Hydraulic) 52 Cylinders: Electro-Hydraulic 52 Cylinders: Hydraulic 52 Cylinders: Metric 52 Cylinders: Mill 52 Cylinders: Miniature 52 Cylinders: Pneumatic 52 Cylinders: Rodless 52 Dampers: Hydraulic 52 Dampers: Rotary 53 Data Acquisition Systems 53 Drives: Hydro-Static 53 Dryers: Air-Absorptive 53 Dryers: Air-Adsorptive 53

www.design-engineering.com

48-61-FP-DES.2.indd 49

Dryers: Air-Chemical Dryers: Air-Refrigerant Electrical Panels Enclosures End Effectors Fasteners Filter Carts Filter Regulator Lubricator (Frl) Filters: Compressed Air Filters: Exhaust Air Filters: Flanged Filters: Hydraulic Filters: Pneumatic Filtration Systems Fittings: Flanged Fittings: Hose & Tube Fittings: Metric Hose & Tube Fittings: Pipe Fittings: Push-Ins Flange Protection Flanges: Hydraulic Flanges: Threaded & Welded Flow Meters Flow Restrictors Fluoroelastomer Flushing, Oil Systems Gaskets & Materials Gauges: Digital Gauges: Flow Gauges: Fluid Level Gauges: Oil Level Gauges: Pressure Gauges: Temperature Gauges: Vacuum Gear Drives Grippers: Hydraulic Grippers: Pneumatic Grippers: Vacuum (Cups & Pads) Heaters: Coolant Heaters: Hydraulic Fluid Heat Exchangers Heat Exchangers: Air-Cooled Heat Exchangers: Air/Oil Cooled Heat Exchangers: Aluminium-Finned Heat Exchangers: Copper-Finned Heat Exchangers: Steel-Finned Heat Exchangers: Water-Cooled High-Temp Masking Hose: Air Hose: Air Reels Hose: Flexible Metal Hose: Hydraulic Hose: Self-Storing Hydraulic Fluids: Environmental Hydraulic Fluids: Fire Resistant Hydraulic Fluids: Natural Hydraulic Fluids: Petroleum Hydraulic Fluids: Silicone Hydraulic Fluids: Synthetic Hydraulic Fluids: Water Glycol Hydraulic Hose Assemblies Hydraulic Integrated Circuits Hydraulic Power Units Hydraulic Valve Components Hydrostatic Drive Components Indexing Tables, Rotary Pneumatic Intensifiers: Continuous Action Intensifiers: Single Action Intensifiers: Variable Displacement Leak Detectors Load Cells Lubricants Lubrication Devices Lubrication Systems Lubricators, Pneumatic Manifolds: Hydraulic Manifolds: Pneumatic

53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 53 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55

Marine Coolers Meters, Positive Displacement Metric Tube Adapter Mobile Coolers Monitor Systems Motors: Electric With Pump Flange Mount Motors: Electro-Hydraulic Stepping Motors: Hydraulic Motors: Metric Motors: Pneumatic Mufflers, Pneumatic Nozzles Oil Coolers O Rings Packings: Braided Packings: Cup Packings: Gasket Packings: Leather Packings: Metallic Packings: Synthetic Packings: U-Rings Packings: V-Rings Piston Rings: Metal Piston Rings: Nonmetallic Piston Rods Port Plugs Power Take Offs Power Units & Systems Pressure Gauge Protectors - Snubbers Pressure Switches Pressure Transmitters Pump Adaptors Pump Housings Pumps: Centrifugal Pumps: Diaphragm Pumps: Fixed Displacement Pumps: High Pressure Pumps: Hydraulic Pumps: Hydraulic Hand Pumps: Metering Pumps: Piston Pumps: Pneumatic Pumps: Pneumatic Driven Pumps: Reciprocating Pumps: Rotary Pumps: Rotary Positive Replacement Pumps: Vacuum Pumps: Variable Displacement Pumps: Water Receivers, Pneumatic Regulators: Hydraulic Regulators: Pneumatic Regulators: Vacuum Reservoir Accessories Reservoir Tanks Rings: Backup Rings: Piston Rings: Rubber Diaphragm Rings: Wear Rings: Wiper Sealants: Thread Seals: Fittings Seals: General Seals: Kits Seals: Mechanical Seals: Oil Seals: O-Ring-Elastomeric Seals: O-Ring-Metallic Seals: O-Ring-Plastomeric Seals: Rubber Diaphragm Seals: Rubber Hydraulic Sensors Sensors: Displacement Sensors: Pressure Sensors: Ultrasonic Fluid Level Shafting Shims Shock Absorbers Silencers & Mufflers Sleeves, Boots

55 55 55 55 55 55 55 55 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 57 58 57 58 58 58 58 58 58 58 58 58 58 58 58 58

Slides, Pneumatic Software: Fluid Power Component Selection Software: Fluid Power System Design Solenoid Valves: General Purpose Solenoid Valves: Proportional Springs: Air Springs: Gas Strainers/ Diffusers Switches: Fluid Level Switches: Pressure Switches: Temperature Swivel Joints: Hydraulic Swivel Joints: Pneumatic Tachometers/Stroboscopes Test Equipment: Hydraulic Test Equipment: Pneumatic Testing Instruments Thread Protectors Thrusters, Linear Transducers: Electro-Pneumatic Transducers: Pressure Transmissions: Hydrodynamic Transmissions: Hydrostatic Tube Fabricating Tube/Hose Cleaning Equipment Tubing: Aluminium Tubing: Copper Tubing & Hose Tubing: Plastic Tubing: Rubber Tubing: Stainless Steel Tubing: Steel Turbine Oil Coalescers Unions, Rotating Vacuum Cups Vacuum Dehydrators Valve Circuits Valves Air: Check Valves Air: Circuit Logic Control Valves Air: Deceleration Valves Air: Directional Valves Air: Drive Valves Air: Flow Control Valves Air: Pilot Operated Valves Air: Quick Exhaust Dumping Valves Air: Relief Valves Air: Sequence Valves Air: Shuttle Valves Air: Solenoid Valves Air: Time Delay Valves: Ball Valves: Bleed Valves: Butterfly Valves: Check Valves: Gate Valves Hydraulic: Air Bleed Valves Hydraulic: Check Pilot Operated Valves Hydraulic: Counterbalance Valves Hydraulic: Deceleration Valves Hydraulic: Directional Valves Hydraulic: Flow Control Valves Hydraulic: Flow Dividers Valves Hydraulic: Miniature Valves Hydraulic: Mobile Valves Hydraulic: Pilot Operated Valves Hydraulic: Plastic Diaphragm Valves Hydraulic: Pressure Control Valves Hydraulic: Pressure Reducing Valves Hydraulic: Proportional Valves Hydraulic: Relief Unloading Valves Hydraulic: Sequence Valves Hydraulic: Servo Valves Hydraulic: Shuttle Valves Hydraulic: Surge Damping Valves: Metering Valves: Plugs Valves Pneumatic, Miniature Valve Spools, Directional Control Hydraulic Valves: Stop Valves: Water

49 58 58 58 58 58 58 58 58 58 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 60 60 60 60 60 59 59 59 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 59 60 60

March/April | 2013

13-04-09 1:15 PM

You’re already running the best equipment.

Keep it running with the best offline filtration.

Our super secret, hi-tech, [insert adjective here] offline filtration equipment blah blah blah.

Filtration isn’t about gimmicks. It’s about making sure your equipment runs the best that it can, day in and day out.

Our offline filtration systems work. Plain and simple. Sure, they’re pretty (see left), but you won’t find a better way to lower your ISO codes and keep your equipment running clean.

Still confused about ISO codes? Scan the QR code for a video explanation or get in touch and we’ll run you through it step by step. Heck, just tweet at us and we’ll send you the link. hyprofiltration.com @hyprofiltration 1 317 849 3535

48-61-FP-DES.2.indd 50

13-04-09 1:15 PM

ProductListings ACCUMULATORS: BLADDER Berendsen Fluid Power Brim G & H Fluid Handling Products Drive Products Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation Hydraflow-Pumptech Fluid Power Hypower Systems Hyseco Fluid Systems Ltd Lifco Hydraulics MP Filtri (Canada) Nippon Accumulator Co. Ltd. Norcan Fluid Power Parker Hannifin Canada Pentair Canada Inc. Stauff Canada Ltd. Toro Hydraulic & Machinery Wainbee Limited

ACCUMULATORS: DIAPHRAGM Brim G & H Fluid Handling Products Drive Products Hurricane Pump Distribution Hydac Corporation MP Filtri (Canada) Nippon Accumulator Co. Ltd. Parker Hannifin Canada Stauff Canada Ltd. Wainbee Limited

ACCUMULATORS: NON-SEPARATOR Nippon Accumulator Co. Ltd.

ACCUMULATORS: PISTON

Berendsen Fluid Power Brim G & H Fluid Handling Products Cross Mfg Inc. Great Lakes Hydraulics Hydac Corporation Nippon Accumulator Co. Ltd. Parker Hannifin Canada Process Products Limited Ram Industries Wainbee Limited

ACCUMULATORS: SPRING-LOADED Dendoff Springs Hydac Corporation

ACTUATORS: ELECTRIC

Bimba Manufacturing Co. Brim G & H Fluid Handling Products Clippard Instrument Laboratory Electromate Haydon Kerk Motion Solutions Parker Hannifin Canada Setpoint Technologies SMC Pneumatics (CDA) Ltd. Unified Alloys Wainbee Limited Wittenstein

ACTUATORS: LINEAR-ELECTRIC

ACTUATORS: MANUAL Val-Matic Valve & Mfg. Corp.

ACTUATORS: ROTARY HYDRAULIC Berendsen Fluid Power Feldcamp Equipment Flodraulic Group Helac Corporation Higginson Equipment Inc. Moog Flo-Tork MP Filtri (Canada) Parker Hannifin Canada Scott Rotary Seals Toro Hydraulic & Machinery Wainbee Limited

ACTUATORS: ROTARY PNEUMATIC Fabco-Air Inc. Festo Higginson Equipment Inc. Moog Flo-Tork Parker Hannifin Canada Scott Rotary Seals Seal Master Corporation Setpoint Technologies SMC Pneumatics (CDA) Ltd. Wainbee Limited

ACTUATORS: SOLENOID

Brim G & H Fluid Handling Products Clippard Instrument Laboratory Process Products Limited Toro Hydraulic & Machinery Unified Alloys Wainbee Limited

ADAPTORS & MOUNTS, MOTOR Berendsen Fluid Power BSF, Inc. Drive Products Great Lakes Hydraulics MP Filtri (Canada) Rosta Inc. Rotator Products Ltd. RPM Mechanical Inc. Toro Hydraulic & Machinery

ADAPTORS & MOUNTS, PUMP Berendsen Fluid Power BSF, Inc. Drive Products Great Lakes Hydraulics MP Filtri (Canada) Rosta Inc. RPM Mechanical Inc. Toro Hydraulic & Machinery

AFTER-COOLERS

Drive Products Maritime Compressor Thermal Transfer Products Wainbee Limited

AIR BREATHERS

Cowper Inc. Electromate Festo Haydon Kerk Motion Solutions Parker Hannifin Canada PQ Systems Ltd. Rotator Products Ltd. Servo-Robot Inc. Skeans Eng & Mach Ltd. Wainbee Limited Wittenstein

Berendsen Fluid Power Climax Company Ltd. Drive Products Filtramax Inc. Great Lakes Hydraulics Hy-Pro Filtration Hydac Corporation MP Filtri (Canada) Parker Hannifin Canada Wainbee Limited

ACTUATORS: LINEAR-HYDRAULIC

Coilhose Pneumatics Maritime Compressor Wainbee Limited

Berendsen Fluid Power Brim G & H Fluid Handling Products Fabco-Air Inc. Feldcamp Equipment Higginson Equipment Inc. Humphrey Automation Inc. KYB Americas Corporation Parker Hannifin Canada PQ Systems Ltd. Process Products Limited Ram Industries Unified Alloys Wainbee Limited

ACTUATORS: LINEAR-HYDRAULICSERVO Berendsen Fluid Power Parker Hannifin Canada Process Products Limited Wainbee Limited

AIR COMPRESSOR OILS

48-61-FP-DES.2.indd 51

Maritime Compressor NCA Ltd. Skeans Eng & Mach Ltd. Wainbee Limited

BLOWERS: CENTRIFUGAL

Airvacox Ltée NCA Ltd.

Drive Products Hurricane Pump Distribution Wainbee Limited

BLOWERS: POSITIVE DISPLACEMENT Drive Products Hurricane Pump Distribution

BRAKES: HYDRAULIC

Berendsen Fluid Power Dellner Industrial Hydraflow-Pumptech Fluid Power MICO, Incorporated Pinnacle Systems, Inc. Rotator Products Ltd. SunSource Tech Serv (Cnd) Ltd Toro Hydraulic & Machinery Wainbee Limited

BRAKES: PNEUMATIC Higginson Equipment Inc. Seal Master Corporation Wainbee Limited

BUMPERS

Rotator Products Ltd. RPM Mechanical Inc.

CAN BUS SYSTEMS

Drive Products Festo Flodraulic Group Hawe North America Parker Hannifin Canada SunSource Tech Serv (Cnd) Ltd

CLAMPS, HOSE & TUBE & PIPE Boyaux et Raccords Green Line Cariboo House of Hose/Belting Cords Canada Limited Fairview Fittings/Mfg Ltd. Great Lakes Hydraulics Hydac Corporation Kuritec Corporation Oetiker Inc. Patel Hose Inc. Seal Master Corporation Toro Hydraulic & Machinery Unified Alloys Wainbee Limited Williams Fluidair Corp Ltd.

CLOSURES, CAPS & PLUGS Cords Canada Limited Daemar Inc.

CLUTCHES: PNEUMATIC TENSION CONTROL Higginson Equipment Inc.

COMPRESSORS: AIR-DIAPHRAGM NCA Ltd. Wainbee Limited

COMPRESSORS: AIR-OIL-LESS Aerzen Blowers/Compressors of Cdn Len’s Equipment Company Maritime Compressor Nash, A Gardner Denver Product NCA Ltd. Wainbee Limited

COMPRESSORS: AIR-RECIPROCATING

Brim G & H Fluid Handling Products Clippard Instrument Laboratory Festo Wainbee Limited

Airvacox Ltée Len’s Equipment Company Maritime Compressor NCA Ltd. Skeans Eng & Mach Ltd. Wainbee Limited

AIR OPERATED HYDRAULIC PUMPS

COMPRESSORS: AIR-ROTARY SCREW

AIR LOGIC DEVICES

Higginson Equipment Inc. Wainbee Limited

BLADDERS

Berendsen Fluid Power Brim G & H Fluid Handling Products Hydac Corporation MP Filtri (Canada) Parker Hannifin Canada Toro Hydraulic & Machinery

BLOW GUNS

Coilhose Pneumatics Exair Corporation

www.design-engineering.com

Festo Parker Hannifin Canada TOPRING Wainbee Limited Williams Fluidair Corp Ltd.

Aerzen Blowers/Compressors of Cdn Airvacox Ltée Drive Products Len’s Equipment Company Maritime Compressor NCA Ltd. Pro-Ject Industries Skeans Eng & Mach Ltd.

COMPRESSORS: AIR-ROTARY VANE Airvacox Ltée Drive Products Len’s Equipment Company

51

COMPRESSORS: CENTRIFUGAL COMPRESSORS: DISTRIBUTION SYSTEMS NCA Ltd. TOPRING

CONNECTORS, ELECTRIC Berendsen Fluid Power Cords Canada Limited

CONTAMINATION CONTROL Berendsen Fluid Power Checkfluid Inc. Hy-Pro Filtration Hydac Corporation

CONTROLLERS: ELECTRO-HYDRAULIC Berendsen Fluid Power Brand Hydraulics Drive Products Feldcamp Equipment Hawe North America Lifco Hydraulics Norcan Fluid Power Parker Hannifin Canada Pinnacle Systems, Inc. PSI Fluid Power Ltd. Toro Hydraulic & Machinery Wainbee Limited

CONTROLLERS: ELECTRO-PNEUMATIC Drive Products Festo Parker Hannifin Canada Pinnacle Systems, Inc. Wainbee Limited

CONTROLLERS: FLOW Berendsen Fluid Power Can-Am Instruments Ltd. Chartwell Automation Inc. Drive Products Omega

CONTROLLERS: HYDROSTATIC DRIVE Berendsen Fluid Power Drive Products Feldcamp Equipment Flodraulic Group Poclain Hydraulics

CONTROLLERS: MOTION Ace Controls Inc. Berendsen Fluid Power Clippard Instrument Laboratory Cowper Inc. Davis Controls Ltd. Drive Products Electromate Festo Haydon Kerk Motion Solutions Maxon Precision Motors, Inc. Omega Parker Hannifin Canada Pinnacle Systems, Inc. PQ Systems Ltd. Wainbee Limited

CONTROLLERS: PROGRAMMABLE LOGIC Carlo Gavazzi (Canada) Inc. Davis Controls Ltd. Drive Products Eaton Electromate Festo Hawe North America Maxon Precision Motors, Inc. Omega

CONTROLS: ELECTRO-HYDRAULIC Berendsen Fluid Power Brand Hydraulics Drive Products Flodraulic Group Fluid Power Sales, Inc. Hypower Systems Lynch Fluid Controls Parker Hannifin Canada Pinnacle Systems, Inc. PSI Fluid Power Ltd.

March/April | 2013

13-04-09 1:15 PM

52 ProductListings CONTROLS: ELECTRONIC Berendsen Fluid Power Brand Hydraulics Carlo Gavazzi (Canada) Inc. Chartwell Automation Inc. Drive Products Electro-Meters Co. Electromate Festo Flodraulic Group Lynch Fluid Controls Maxon Precision Motors, Inc. The Oilgear Company Parker Hannifin Canada Pinnacle Systems, Inc. PQ Systems Ltd. Rotator Products Ltd.

DieQua Electromate Great Lakes Hydraulics John Crane Canada MP Filtri (Canada) Rotator Products Ltd. RPM Mechanical Inc. Wittenstein

Staubli Corp TOPRING

COUPLINGS: FLUID SELF SEALING

Berendsen Fluid Power Clippard Instrument Laboratory Dendoff Springs Great Lakes Hydraulics Hercules Sealing Prod Canada Pneu-Hyd Industries Ltd. Toro Hydraulic & Machinery Wainbee Limited

Berendsen Fluid Power CEJN Industrial Corp.

Parker Hannifin QCD/Snap-tite Operation Rotator Products Ltd. Spez-Tech Engr Fluid Pwr Tech Staubli Corp

COUPLINGS: OIL SELF SEALING CEJN Industrial Corp.

Parker Hannifin QCD/Snap-tite Operation Spez-Tech Engr Fluid Pwr Tech Staubli Corp

COUNTERS: FLUIDICS Electro-Meters Co.

COUNTERS: HYDRAULIC Electro-Meters Co. MP Filtri (Canada)

COUPLINGS: QUICK DISCONNECT Berendsen Fluid Power Beswick Engineering Co Inc. Boyaux et Raccords Green Line CEJN Industrial Corp.

Checkfluid Inc. Climax Company Ltd. Clippard Instrument Laboratory DK-LOK Ontario Inc. Drive Products Durham Pneumatic Automation Eaton Fairview Fittings/Mfg Ltd. Festo Gates Canada Inc. Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Maritime Compressor Omega Parker Hannifin Canada Parker Hannifin QCD/Snap-tite Operation Rotator Products Ltd. Rubberline Products Ltd. Spez-Tech Engr Fluid Pwr Tech

COUNTERS: PARTICLE Berendsen Fluid Power Hy-Pro Filtration Hydac Corporation MP Filtri (Canada) Omega Parker Hannifin Canada Stauff Canada Ltd. Wainbee Limited

COUNTERS: PNEUMATIC Clippard Instrument Laboratory Festo Wainbee Limited

COUPLINGS: AIR SELF SEALING CEJN Industrial Corp.

Parker Hannifin QCD/Snap-tite Operation Spez-Tech Engr Fluid Pwr Tech Staubli Corp

COUPLINGS: FLEXIBLE SHAFT BSF, Inc.

COUPLINGS: ROTATING SWIVEL Festo Scott Rotary Seals Staubli Corp

CYLINDER ACCESSORIES

CYLINDERS: ADJUSTABLE STROKE Bimba Manufacturing Co. Fabco-Air Inc. Higginson Equipment Inc. Parker Hannifin Canada Pneu-Hyd Industries Ltd. Ram Industries Toro Hydraulic & Machinery Wainbee Limited

CYLINDERS: AIR/OIL

Clippard Instrument Laboratory Fabco-Air Inc. Higginson Equipment Inc. Parker Hannifin Canada Ram Industries Toro Hydraulic & Machinery Tuffee Wainbee Limited Williams Fluidair Corp Ltd.

CYLINDERS: CABLE Parker Hannifin Canada Wainbee Limited

CYLINDERS: CLAMPING Festo Parker Hannifin Canada Wainbee Limited

CYLINDERS: COMPOSITE (PNEUMATIC & HYDRAULIC) Berendsen Fluid Power Cariboo House of Hose/Belting Fabco-Air Inc. Festo Higginson Equipment Inc. Parker Hannifin Canada Ram Industries Skeans Eng & Mach Ltd. Toro Hydraulic & Machinery Wainbee Limited

CYLINDERS: ELECTRO-HYDRAULIC Berendsen Fluid Power Higginson Equipment Inc. KYB Americas Corporation Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

CYLINDERS: HYDRAULIC

Hydraulic Solutions Established in 1946, RYCO is a modern innovative company with a commitment to quality, extensive research and product development.

Continually improving and enhancing its product range, meeting and surpassing the most stringent of industry requirements.

RYCO has manufacturing centers and global offices in North America, Canada, South America, Europe, Asia and Oceania regions. “ HIGHER TECHNOLOGY EQUALS GREATER PERFORMANCE - DELIVERED GLOBALLY ” UNITED STATES

+1 281 821 4100

March/April | 2013

48-61-FP-DES.2.indd 52

CANADA

+1 281 821 4100

Berendsen Fluid Power Bimba Manufacturing Co. Brim G & H Fluid Handling Products Cariboo House of Hose/Belting Clippard Instrument Laboratory Cross Mfg Inc. Durham Pneumatic Automation Eastern Fluid Power Inc. Eaton Fabco-Air Inc. Fluid Power Sales, Inc. Gir Del Hydraulic Great Lakes Hydraulics Helac Corporation Hercules Sealing Prod Canada Higginson Equipment Inc. Hydac Corporation Hydraflow-Pumptech Fluid Power Hypower Systems Hyseco Fluid Systems Ltd KYB Americas Corporation Lifco Hydraulics Motion Canada Mullen Fluid Power Norcan Fluid Power The Oilgear Company Parker Hannifin Canada Pneu-Hyd Industries Ltd. Pro-Ject Industries

PSI Fluid Power Ltd. Ram Industries Rubberline Products Ltd. Strictly Sales & Service Taylor Devices Inc. Toro Hydraulic & Machinery Tuffee Wainbee Limited Williams Fluidair Corp Ltd.

CYLINDERS: METRIC

Bimba Manufacturing Co. Brim G & H Fluid Handling Products Cariboo House of Hose/Belting Clippard Instrument Laboratory Durham Pneumatic Automation Great Lakes Hydraulics Hercules Sealing Prod Canada Higginson Equipment Inc. La Société Waircom Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited Williams Fluidair Corp Ltd.

CYLINDERS: MILL

Berendsen Fluid Power Cross Mfg Inc. Durham Pneumatic Automation Great Lakes Hydraulics The Oilgear Company Parker Hannifin Canada Ram Industries Wainbee Limited

CYLINDERS: MINIATURE Berendsen Fluid Power Higginson Equipment Inc. Wainbee Limited Williams Fluidair Corp Ltd.

CYLINDERS: PNEUMATIC ASCO Numatics Berendsen Fluid Power Bimba Manufacturing Co. Cariboo House of Hose/Belting Clippard Instrument Laboratory Cowper Inc. Drive Products Durham Pneumatic Automation Fabco-Air Inc. Festo Great Lakes Hydraulics Hercules Sealing Prod Canada Hi-Tech Controls Higginson Equipment Inc. Hypower Systems La Société Waircom Motion Canada Mullen Fluid Power Parker Hannifin Canada Pro-Ject Industries Ram Industries Rubberline Products Ltd. SMC Pneumatics (CDA) Ltd. SNS Automation Products TOPRING Toro Hydraulic & Machinery Tuffee Wainbee Limited Williams Fluidair Corp Ltd.

CYLINDERS: RODLESS

Berendsen Fluid Power Bimba Manufacturing Co. Cariboo House of Hose/Belting Cowper Inc. Durham Pneumatic Automation Electromate Fabco-Air Inc. Festo Great Lakes Hydraulics Higginson Equipment Inc. La Société Waircom Parker Hannifin Canada Tuffee Wainbee Limited

DAMPERS: HYDRAULIC Ace Controls Inc. Berendsen Fluid Power Hydac Corporation Parker Hannifin Canada Ram Industries Rotator Products Ltd. Taylor Devices Inc. Toro Hydraulic & Machinery

www.design-engineering.com

13-04-09 1:15 PM

ProductListings DAMPERS: ROTARY Ace Controls Inc.

DATA ACQUISITION SYSTEMS Berendsen Fluid Power Electro-Meters Co. Omega Parker Hannifin Canada Wainbee Limited Webster Instruments

Wainbee Limited Winnipeg Fluid System Technologies

Williams Fluidair Corp Ltd.

FITTINGS: HOSE & TUBE

FILTERS: COMPRESSED AIR

Airvacox Ltée Higginson Equipment Inc. Len’s Equipment Company Parker Hannifin Canada Wainbee Limited

Cariboo House of Hose/Belting Coilhose Pneumatics Davis Controls Ltd. Fabco-Air Inc. Festo Filtramax Inc. Great Lakes Hydraulics Higginson Equipment Inc. Len’s Equipment Company Parker Hannifin Canada Pro-Ject Industries Skeans Eng & Mach Ltd. Wainbee Limited

DRYERS: AIR-ADSORPTIVE

FILTERS: EXHAUST AIR

DRIVES: HYDRO-STATIC Berendsen Fluid Power

DRYERS: AIR-ABSORPTIVE

Airvacox Ltée Filtramax Inc. NCA Ltd. Skeans Eng & Mach Ltd.

DRYERS: AIR-CHEMICAL Airvacox Ltée Wainbee Limited

DRYERS: AIR-REFRIGERANT Airvacox Ltée Berg Chilling Systems Inc. Filtramax Inc. Higginson Equipment Inc. Len’s Equipment Company NCA Ltd. Skeans Eng & Mach Ltd. Wainbee Limited

ELECTRICAL PANELS Can-Am Instruments Ltd. Carlo Gavazzi (Canada) Inc. Electro-Meters Co. Flodraulic Group Pro-Ject Industries Rotator Products Ltd. SNS Automation Products

ENCLOSURES

ACE Manufacturing Metals Ltd. Carlo Gavazzi (Canada) Inc. Electro-Meters Co. Omega Ralston Metal Products Ltd.

END EFFECTORS

Parker Hannifin Canada SNS Automation Products Wainbee Limited

FASTENERS

Cords Canada Limited Daemar Inc. Dendoff Springs Oetiker Inc. Spaenaur Inc.

FILTER CARTS

Berendsen Fluid Power Eastern Fluid Power Inc. Filtramax Inc. Gir Del Hydraulic Great Lakes Hydraulics Hy-Pro Filtration Hydac Corporation Parker Hannifin Canada Stauff Canada Ltd. Wainbee Limited

FILTER REGULATOR LUBRICATOR (FRL) ASCO Numatics ASCO Valve Canada Bimba Manufacturing Co. Cariboo House of Hose/Belting Clippard Instrument Laboratory Durham Pneumatic Automation Festo Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Hi-Tech Controls Higginson Equipment Inc. Humphrey Automation Inc. Hypower Systems La Société Waircom Len’s Equipment Company Maritime Compressor Motion Canada Mullen Fluid Power Parker Hannifin Canada

www.design-engineering.com

48-61-FP-DES.2.indd 53

53

SNS Automation Products TOPRING Wainbee Limited

Cariboo House of Hose/Belting Great Lakes Hydraulics Higginson Equipment Inc. N.R. Murphy Limited Parker Hannifin Canada Pro-Ject Industries Wainbee Limited

FILTERS: FLANGED

Cariboo House of Hose/Belting Toro Hydraulic & Machinery Wainbee Limited

FILTERS: HYDRAULIC

Berendsen Fluid Power Drive Products Feldcamp Equipment Filtramax Inc. Fluid Power Sales, Inc. Gir Del Hydraulic Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Hy-Pro Filtration Hydac Corporation Hydraflow-Pumptech Fluid Power Hypower Systems Hyseco Fluid Systems Ltd Motion Canada Mullen Fluid Power Norcan Fluid Power Parker Hannifin Canada PQ Systems Ltd. PSI Fluid Power Ltd. Toro Hydraulic & Machinery Wainbee Limited Williams Fluidair Corp Ltd. Zinga Industries

FILTERS: PNEUMATIC

Air Logic Airvacox Ltée ASCO Numatics Clippard Instrument Laboratory Cowper Inc. Durham Pneumatic Automation Fabco-Air Inc. Festo Great Lakes Hydraulics Higginson Equipment Inc. Humphrey Automation Inc. Len’s Equipment Company Parker Hannifin Canada Rubberline Products Ltd. SMC Pneumatics (CDA) Ltd. Toro Hydraulic & Machinery Wainbee Limited Williams Fluidair Corp Ltd.

Adaconn Beswick Engineering Co Inc. Boyaux et Raccords Green Line Climax Company Ltd. Clippard Instrument Laboratory Coilhose Pneumatics Cords Canada Limited DK-LOK Ontario Inc. Drive Products Eaton Fairview Fittings/Mfg Ltd. Festo Flo Components Ltd. Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Hi-Tech Controls Hyseco Fluid Systems Ltd Main Manufacturing Prod Inc. NewAge Industries Inc. Oetiker Inc. Parker Hannifin Canada Patel Hose Inc. RYCO Hydraulics Strictly Sales & Service Swagelok TOPRING Toro Hydraulic & Machinery Unified Alloys Wainbee Limited Winnipeg Fluid System Technologies

FITTINGS: METRIC HOSE & TUBE Beswick Engineering Co Inc. Climax Company Ltd. Clippard Instrument Laboratory Drive Products Eaton Festo Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Main Manufacturing Prod Inc. NewAge Industries Inc. Parker Hannifin Canada Toro Hydraulic & Machinery Unified Alloys Wainbee Limited

FITTINGS: PIPE

Beswick Engineering Co Inc. Clippard Instrument Laboratory Cords Canada Limited DK-LOK Ontario Inc. Drive Products Fabricated Plastics Limited Fairview Fittings/Mfg Ltd. Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Main Manufacturing Prod Inc. Oetiker Inc. Patel Hose Inc. RYCO Hydraulics Swagelok Unified Alloys Wainbee Limited

FITTINGS: PUSH-INS

Berendsen Fluid Power Davis Controls Ltd. Eastern Fluid Power Inc. Filtramax Inc. Gir Del Hydraulic Hy-Pro Filtration Hydac Corporation Parker Hannifin Canada Stauff Canada Ltd. Wainbee Limited

ASCO Numatics Beswick Engineering Co Inc. Clippard Instrument Laboratory Drive Products Festo Great Lakes Hydraulics Higginson Equipment Inc. Humphrey Automation Inc. Motion Canada NewAge Industries Inc. Parker Hannifin Canada SMC Pneumatics (CDA) Ltd. SNS Automation Products TOPRING Unified Alloys Wainbee Limited

FITTINGS: FLANGED

FLANGE PROTECTION

FILTRATION SYSTEMS

Adaconn Drive Products Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Main Manufacturing Prod Inc. RYCO Hydraulics Unified Alloys

Daemar Inc.

FLANGES: HYDRAULIC Berendsen Fluid Power BSF, Inc. Drive Products Gates Canada Inc.

March/April | 2013

13-04-09 1:15 PM

54

ProductListings Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Main Manufacturing Prod Inc. Parker Hannifin Canada Pesco Sales Process Products Limited RYCO Hydraulics Strictly Sales & Service Toro Hydraulic & Machinery

FLANGES: THREADED & WELDED Berendsen Fluid Power Great Lakes Hydraulics Main Manufacturing Prod Inc. Nett Technologies Inc. Parker Hannifin Canada Process Products Limited

FLOW METERS

Can-Am Instruments Ltd. Chartwell Automation Inc. Climax Company Ltd. Davis Controls Ltd. Drive Products Exair Corporation Furneco International Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation John Sherman Agencies Max Machinery Inc. Norgas Controls Omega Pesco Sales Swagelok Toro Hydraulic & Machinery Wainbee Limited Webster Instruments

FLOW RESTRICTORS

Beswick Engineering Co Inc. Drive Products Higginson Equipment Inc. Wainbee Limited

FLUOROELASTOMER Daemar Inc.

Hercules Sealing Prod Canada RPM Mechanical Inc. Vicone High Performance Rubber

FLUSHING, OIL SYSTEMS Parker Hannifin Canada Toro Hydraulic & Machinery

GASKETS & MATERIALS

C.W. Marsh Company Daemar Inc. Elasto Proxy Inc. Garnitures Expert Seal Inc. Nett Technologies Inc. RPM Mechanical Inc. Seal Master Corporation SKF Machined Seals & Plastics Vicone High Performance Rubber

GAUGES: DIGITAL

Berendsen Fluid Power Drive Products Furneco International Great Lakes Hydraulics Higginson Equipment Inc. Intempco Controls Ltd. John Sherman Agencies Omega Parker Hannifin Canada Stauff Canada Ltd. Switching Solutions Inc. Wainbee Limited Winters Instruments

GAUGES: FLOW

Berendsen Fluid Power Drive Products Great Lakes Hydraulics Hi-Tech Controls Higginson Equipment Inc. Max Machinery Inc. Omega Parker Hannifin Canada Pesco Sales Toro Hydraulic & Machinery Wainbee Limited Webster Instruments

GAUGES: FLUID LEVEL Berendsen Fluid Power Drive Products Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation Madison Company Oil-Rite Corporation Omega Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited Zinga Industries

GAUGES: OIL LEVEL

Berendsen Fluid Power Davis Controls Ltd. Drive Products Great Lakes Hydraulics Higginson Equipment Inc. Oil-Rite Corporation Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

GAUGES: PRESSURE

Berendsen Fluid Power Climax Company Ltd. Davis Controls Ltd. Drive Products Fairview Fittings/Mfg Ltd. Festo Furneco International Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Higginson Equipment Inc. Hydac Corporation John Sherman Agencies MICO, Incorporated Norgas Controls Omega Parker Hannifin Canada Pesco Sales Rubberline Products Ltd. Swagelok Toro Hydraulic & Machinery Wainbee Limited Webster Instruments Winters Instruments Zinga Industries

GAUGES: TEMPERATURE Berendsen Fluid Power Drive Products Furneco International Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation Intempco Controls Ltd. John Sherman Agencies Omega Parker Hannifin Canada Pesco Sales Toro Hydraulic & Machinery Wainbee Limited Winters Instruments

GAUGES: VACUUM

Drive Products Festo Great Lakes Hydraulics Higginson Equipment Inc. John Sherman Agencies Omega Parker Hannifin Canada Poclain Hydraulics Wainbee Limited Winters Instruments Zinga Industries

GEAR DRIVES

DieQua Helac Corporation Maxon Precision Motors, Inc. Omega Rotator Products Ltd. SunSource Tech Serv (Cnd) Ltd Wittenstein

GRIPPERS: HYDRAULIC Toro Hydraulic & Machinery Wainbee Limited

GRIPPERS: PNEUMATIC

ASCO Numatics Durham Pneumatic Automation Fabco-Air Inc. Festo Higginson Equipment Inc.

March/April | 2013

48-61-FP-DES.2.indd 54

Omega Parker Hannifin Canada SMC Pneumatics (CDA) Ltd. SNS Automation Products Wainbee Limited

GRIPPERS: VACUUM (CUPS & PADS) Festo Higginson Equipment Inc. Parker Hannifin Canada Wainbee Limited

HEAT EXCHANGERS

API Heat Transfer Berg Chilling Systems Inc. Hydac Corporation Toro Hydraulic & Machinery Wainbee Limited

HEAT EXCHANGERS: AIR-COOLED API Heat Transfer Berendsen Fluid Power Berg Chilling Systems Inc. Drive Products Great Lakes Hydraulics Hydac Corporation John Crane Canada Toro Hydraulic & Machinery Wainbee Limited

HEAT EXCHANGERS: AIR/OIL COOLED Airvacox LtĂŠe API Heat Transfer Berendsen Fluid Power Berg Chilling Systems Inc. Drive Products Fluid Power Sales, Inc. Lifco Hydraulics Norcan Fluid Power SunSource Tech Serv (Cnd) Ltd Thermal Transfer Products Toro Hydraulic & Machinery Wainbee Limited

HEAT EXCHANGERS: ALUMINIUMFINNED API Heat Transfer Berendsen Fluid Power Berg Chilling Systems Inc. Drive Products Wainbee Limited

HEAT EXCHANGERS: COPPER-FINNED Berendsen Fluid Power Berg Chilling Systems Inc. Drive Products Wainbee Limited

HEAT EXCHANGERS: STEEL-FINNED Berendsen Fluid Power Berg Chilling Systems Inc. Drive Products Wainbee Limited

HEAT EXCHANGERS: WATER-COOLED API Heat Transfer Berendsen Fluid Power Berg Chilling Systems Inc. Drive Products Great Lakes Hydraulics Hydac Corporation John Crane Canada Thermal Transfer Products Toro Hydraulic & Machinery Wainbee Limited

HEATERS: COOLANT Omega

HEATERS: HYDRAULIC FLUID Berendsen Fluid Power Drive Products Great Lakes Hydraulics Toro Hydraulic & Machinery Wainbee Limited

HIGH-TEMP MASKING Daemar Inc.

HOSE: AIR

Boyaux et Raccords Green Line CEJN Industrial Corp.

Checkfluid Inc. Clippard Instrument Laboratory Coilhose Pneumatics Drive Products Gates Canada Inc. HANSA-FLEX Hydraulics Canada Higginson Equipment Inc. Kuritec Corporation

www.design-engineering.com

13-04-09 1:15 PM

ProductListings Mullen Fluid Power NewAge Industries Inc. Parker Hannifin Canada Patel Hose Inc. Seal Master Corporation TOPRING Wainbee Limited

HOSE: AIR REELS

CEJN Industrial Corp.

Higginson Equipment Inc. Swagelok TOPRING Wainbee Limited

HOSE: FLEXIBLE METAL DK-LOK Ontario Inc. Eaton Kuritec Corporation Tuffee

HOSE: HYDRAULIC

Boyaux et Raccords Green Line Checkfluid Inc. Climax Company Ltd. Drive Products Eaton Fairview Fittings/Mfg Ltd. Gates Canada Inc. HANSA-FLEX Hydraulics Canada Motion Canada Parker Hannifin Canada RYCO Hydraulics Strictly Sales & Service Toro Hydraulic & Machinery Tuffee Wainbee Limited

Hydac Corporation Hyseco Fluid Systems Ltd Motion Canada Norcan Fluid Power The Oilgear Company Parker Hannifin Canada SNS Automation Products Strictly Sales & Service Toro Hydraulic & Machinery Wainbee Limited

HYDRAULIC VALVE COMPONENTS Berendsen Fluid Power Drive Products Great Lakes Hydraulics Higginson Equipment Inc. Lynch Fluid Controls Motion Canada Parker Hannifin Canada Parker Hannifin QCD/Snap-tite Operation Toro Hydraulic & Machinery Wainbee Limited

HYDROSTATIC DRIVE COMPONENTS

Berendsen Fluid Power Drive Products Flodraulic Group Norcan Fluid Power SunSource Tech Serv (Cnd) Ltd

INDEXING TABLES, ROTARY PNEUMATIC Cyclo-Index Festo Wainbee Limited

MANIFOLDS: PNEUMATIC Clippard Instrument Laboratory Drive Products Festo Fluid Power Sales, Inc. Great Lakes Hydraulics Lynch Fluid Controls Parker Hannifin Canada Scott Rotary Seals Toro Hydraulic & Machinery Wainbee Limited

MARINE COOLERS Drive Products

INTENSIFIERS: CONTINUOUS ACTION

METERS, POSITIVE DISPLACEMENT

Higginson Equipment Inc. Parker Hannifin Canada Wainbee Limited

Max Machinery Inc. Omega Webster Instruments

INTENSIFIERS: SINGLE ACTION

METRIC TUBE ADAPTER

HYDRAULIC FLUIDS: FIRE RESISTANT

Festo Higginson Equipment Inc. Parker Hannifin Canada Wainbee Limited

Checkfluid Inc. Drive Products HANSA-FLEX Hydraulics Canada Toro Hydraulic & Machinery

INTENSIFIERS: VARIABLE DISPLACEMENT

MOBILE COOLERS

HYDRAULIC FLUIDS: NATURAL

HOSE: SELF-STORING CEJN Industrial Corp.

Kuritec Corporation TOPRING

HYDRAULIC FLUIDS: ENVIRONMENTAL Wainbee Limited

Wainbee Limited

Bruno’s of Chilliwack

HYDRAULIC FLUIDS: PETROLEUM Bruno’s of Chilliwack Drive Products Kuritec Corporation

HYDRAULIC FLUIDS: SILICONE Bruno’s of Chilliwack

The Oilgear Company Parker Hannifin Canada Wainbee Limited

LEAK DETECTORS

Can-Am Instruments Ltd. Exair Corporation

LOAD CELLS

HYDRAULIC FLUIDS: SYNTHETIC

Davis Controls Ltd. Omega Rotator Products Ltd.

HYDRAULIC FLUIDS: WATER GLYCOL

LUBRICANTS

Drive Products

Kuritec Corporation

HYDRAULIC HOSE ASSEMBLIES Boyaux et Raccords Green Line CEJN Industrial Corp.

Drive Products HANSA-FLEX Hydraulics Canada Mullen Fluid Power Parker Hannifin Canada Staubli Corp Strictly Sales & Service Toro Hydraulic & Machinery Wainbee Limited

HYDRAULIC INTEGRATED CIRCUITS Berendsen Fluid Power Drive Products Eastern Fluid Power Inc. Flodraulic Group Great Lakes Hydraulics Lynch Fluid Controls Parker Hannifin Canada Pinnacle Systems, Inc. PQ Systems Ltd. SunSource Tech Serv (Cnd) Ltd

HYDRAULIC POWER UNITS Berendsen Fluid Power Dellner Industrial Eastern Fluid Power Inc. Gir Del Hydraulic Great Lakes Hydraulics

www.design-engineering.com

48-61-FP-DES.2.indd 55

Drive Products F. Bacon Industriel Inc. Flo Components Ltd. Pro-Ject Industries

LUBRICATION DEVICES Climax Company Ltd. F. Bacon Industriel Inc. Flo Components Ltd. Higginson Equipment Inc. Parker Hannifin Canada

LUBRICATION SYSTEMS Berendsen Fluid Power Climax Company Ltd. F. Bacon Industriel Inc. Flo Components Ltd. Higginson Equipment Inc. Oil-Rite Corporation Parker Hannifin Canada Wainbee Limited

LUBRICATORS, PNEUMATIC ASCO Numatics ASCO Valve Canada Clippard Instrument Laboratory Coilhose Pneumatics Cowper Inc. F. Bacon Industriel Inc. Festo Flo Components Ltd. Higginson Equipment Inc. Parker Hannifin Canada

MANIFOLDS: HYDRAULIC

55

Berendsen Fluid Power CEJN Industrial Corp.

Cross Mfg Inc. Drive Products Feldcamp Equipment Fluid Power Sales, Inc. Great Lakes Hydraulics Hawe North America Hydac Corporation Hydraflow-Pumptech Fluid Power Lynch Fluid Controls Main Manufacturing Prod Inc. The Oilgear Company Parker Hannifin Canada PSI Fluid Power Ltd. Ram Industries Scott Rotary Seals SunSource Tech Serv (Cnd) Ltd Toro Hydraulic & Machinery Unified Alloys Wainbee Limited

Berg Chilling Systems Inc. Drive Products Hydac Corporation

MONITOR SYSTEMS

Can-Am Instruments Ltd. Carlo Gavazzi (Canada) Inc. Electro-Meters Co. Flodraulic Group Lynch Fluid Controls

MOTORS: ELECTRIC WITH PUMP FLANGE MOUNT Maxon Precision Motors, Inc. Rotator Products Ltd. Toro Hydraulic & Machinery

MOTORS: ELECTRO-HYDRAULIC STEPPING Haydon Kerk Motion Solutions Omega Wainbee Limited

MOTORS: HYDRAULIC

Berendsen Fluid Power Cross Mfg Inc. Drive Products Eastern Fluid Power Inc. Eaton Flodraulic Group Fluid Power Sales, Inc. Gir Del Hydraulic Great Lakes Hydraulics Hawe North America Helac Corporation Hydraflow-Pumptech Fluid Power Hypower Systems Hyseco Fluid Systems Ltd KYB Americas Corporation Lifco Hydraulics Lynch Fluid Controls Motion Canada Norcan Fluid Power The Oilgear Company Parker Hannifin Canada Poclain Hydraulics PSI Fluid Power Ltd. Strictly Sales & Service Toro Hydraulic & Machinery

March/April | 2013

13-04-09 1:15 PM

56

ProductListings Wainbee Limited

PISTON RINGS: NONMETALLIC

Daemar Inc. Drive Products Garnitures Expert Seal Inc. Hi-Tech Seals Inc. John Crane Canada

MOTORS: METRIC DieQua Drive Products Electromate Wainbee Limited

Hercules Sealing Prod Canada SKF Machined Seals & Plastics

PISTON RODS

Parker Hannifin Canada Pentair Canada Inc. Toro Hydraulic & Machinery

PACKINGS: CUP

C.W. Marsh Company Daemar Inc. Hercules Sealing Prod Canada Toro Hydraulic & Machinery

MOTORS: PNEUMATIC Great Lakes Hydraulics Higginson Equipment Inc. Parker Hannifin Canada

MUFFLERS, PNEUMATIC Clippard Instrument Laboratory Exair Corporation Fabco-Air Inc. Festo Higginson Equipment Inc. La Société Waircom Omega Parker Hannifin Canada Wainbee Limited

NOZZLES

Exair Corporation Parker Hannifin Canada

PORT PLUGS Daemar Inc.

POWER TAKE OFFS

PACKINGS: GASKET

C.W. Marsh Company Garnitures Expert Seal Inc. John Crane Canada SKF Machined Seals & Plastics

Drive Products Parker Hannifin Canada SunSource Tech Serv (Cnd) Ltd

PACKINGS: LEATHER

Berendsen Fluid Power Eastern Fluid Power Inc. Electro-Meters Co. Feldcamp Equipment Flodraulic Group Great Lakes Hydraulics Hawe North America Hydac Corporation Hydraflow-Pumptech Fluid Power Hypower Systems Mullen Fluid Power Parker Hannifin Canada Strictly Sales & Service Toro Hydraulic & Machinery Wainbee Limited

POWER UNITS & SYSTEMS

C.W. Marsh Company Hercules Sealing Prod Canada

PACKINGS: METALLIC John Crane Canada Toro Hydraulic & Machinery

PACKINGS: SYNTHETIC Daemar Inc.

O RINGS

Daemar Inc. Drive Products Hercules Sealing Prod Canada Omega RPM Mechanical Inc. SKF Machined Seals & Plastics Spaenaur Inc. Toro Hydraulic & Machinery

PACKINGS: U-RINGS

C.W. Marsh Company Daemar Inc. Hercules Sealing Prod Canada Nuraseal Co. SKF Machined Seals & Plastics Toro Hydraulic & Machinery

PRESSURE GAUGE PROTECTORS SNUBBERS

PACKINGS: V-RINGS

Berendsen Fluid Power Great Lakes Hydraulics Omega Parker Hannifin Canada Winters Instruments

C.W. Marsh Company Daemar Inc. Hercules Sealing Prod Canada Hi-Tech Seals Inc. Nuraseal Co. SKF Machined Seals & Plastics Toro Hydraulic & Machinery

OIL COOLERS

Berg Chilling Systems Inc. Drive Products Great Lakes Hydraulics Hydac Corporation Thermal Transfer Products Toro Hydraulic & Machinery Wainbee Limited

PRESSURE SWITCHES

Air Logic Berendsen Fluid Power Chartwell Automation Inc. Clippard Instrument Laboratory

PISTON RINGS: METAL

Hercules Sealing Prod Canada Toro Hydraulic & Machinery

PACKINGS: BRAIDED

Drive Products Festo Furneco International Great Lakes Hydraulics Hydac Corporation Intempco Controls Ltd. John Crane Canada MICO, Incorporated Omega Parker Hannifin Canada PQ Systems Ltd. SNS Automation Products Switching Solutions Inc. Toro Hydraulic & Machinery Wainbee Limited Winters Instruments

PRESSURE TRANSMITTERS Berendsen Fluid Power Drive Products Festo Flodraulic Group Furneco International Intempco Controls Ltd. Omega Parker Hannifin Canada Switching Solutions Inc. Winters Instruments

PUMP ADAPTORS

Berendsen Fluid Power BSF, Inc. Drive Products Great Lakes Hydraulics Parker Hannifin Canada Rotator Products Ltd. Toro Hydraulic & Machinery

PUMP HOUSINGS

Berendsen Fluid Power BSF, Inc. Parker Hannifin Canada Toro Hydraulic & Machinery

PUMPS: CENTRIFUGAL Drive Products Higginson Equipment Inc.

KEEP PRODUCTION MOVING…

SEAL MASTER

CUSTOM ENGINEERED INFLATABLES FOR MOTION CONTROL The versatility, flexibility and close tolerance capability of Seal Master engineered inflatables offer creative solutions in applying forces and motion control in a more effective manner than common mechanical methods.

Sealing is just one of many tasks for custom-built, fabric-reinforced, elastomeric inflatables. They’re ideal for use as actuators, brakes, valves, clutches, wipers and for other innovative applications.

Backed by in-depth technical/customer service, they’ll replace cumbersome, hard-tomaintain processing and handling components to lessen downtime.

Design assistance offered

TORO HYDRAULIC offers the most popular brands, Hydraulic components PLUS superior sales & service ➢ Hydraulic Pumps, Valves, Motors, Cylinders ➢ Hydrostatic Transmission Pumps, Motors ➢ Variable, fixed, displacement Pumps ➢ Staffa Motors, Rotary, Gearboxes, Winches ➢ Custom built machines, Power Units, hydraulic Presses ➢ On site repair, troubleshooting, installation ➢ Consultant for Design and analysis of Hydraulic Systems ➢ Hose and Fittings, Tube bending

“They’re Deucedly Clever”

SEAL MASTER CORPORATION Inflatable seals and other custom rubber products

368 MARTINEL DRIVE, KENT, OH 44240-4368 USA 800.477.8436 • 330.673.8410 • FAX 330.673.8242 E-mail: info@sealmaster.com • www.sealmaster.com

1415 Bonhill Road, Unit #15, Mississauga ON, L5T 1R2 (CANADA) Tel: 905.565.8887 Fax: 905.565.5788 Emergency Services: 416.720.7319 E-mail: sales@torohyd.com Website: www.torohyd.com

March/April | 2013

www.design-engineering.com TORO HYDRAULIC Sq.1.indd 1

48-61-FP-DES.2.indd 56

12-03-26 12:47 PM 13-04-09 1:15 PM

ProductListings Hurricane Pump Distribution KSB Pumps Inc. Netzsch Canada Omega Pentair Canada Inc. Pesco Sales Plad Equipment Setpoint Technologies Viking Pump of Canada Wainbee Limited

PUMPS: DIAPHRAGM

Higginson Equipment Inc. Hurricane Pump Distribution Omega Pesco Sales Setpoint Technologies Toro Hydraulic & Machinery Tuffee Viking Pump of Canada Wainbee Limited

PUMPS: FIXED DISPLACEMENT Drive Products Great Lakes Hydraulics Higginson Equipment Inc. Omega Parker Hannifin Canada Pentair Canada Inc. Toro Hydraulic & Machinery Viking Pump of Canada Wainbee Limited

PUMPS: HIGH PRESSURE Drive Products Flodraulic Group Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. Hurricane Pump Distribution KSB Pumps Inc. Parker Hannifin Canada Pentair Canada Inc. Plad Equipment Toro Hydraulic & Machinery Viking Pump of Canada Wainbee Limited

PUMPS: HYDRAULIC

ALA Industries Limited Cross Mfg Inc. Drive Products Eaton Feldcamp Equipment Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. Hurricane Pump Distribution Hydraflow-Pumptech Fluid Power Hypower Systems KYB Americas Corporation Lifco Hydraulics Motion Canada Mullen Fluid Power Norcan Fluid Power The Oilgear Company Parker Hannifin Canada Pesco Sales PSI Fluid Power Ltd. Strictly Sales & Service Toro Hydraulic & Machinery Wainbee Limited Webster Instruments

PUMPS: HYDRAULIC HAND Brand Hydraulics Great Lakes Hydraulics

PUMPS: METERING

Hurricane Pump Distribution Netzsch Canada Oil-Rite Corporation Omega Pentair Canada Inc. Pesco Sales Setpoint Technologies Viking Pump of Canada

PUMPS: PISTON

ALA Industries Limited Drive Products Great Lakes Hydraulics Higginson Equipment Inc. The Oilgear Company Parker Hannifin Canada Pentair Canada Inc. Toro Hydraulic & Machinery

PUMPS: PNEUMATIC

www.design-engineering.com

48-61-FP-DES.2.indd 57

Great Lakes Hydraulics Toro Hydraulic & Machinery Wainbee Limited

PUMPS: PNEUMATIC DRIVEN Setpoint Technologies Wainbee Limited

PUMPS: RECIPROCATING Pentair Canada Inc. Toro Hydraulic & Machinery Wainbee Limited

PUMPS: ROTARY

RESERVOIR ACCESSORIES Berendsen Fluid Power Drive Products Filtramax Inc. Gir Del Hydraulic Great Lakes Hydraulics Hy-Pro Filtration Hydac Corporation Inox-Tech Canada Parker Hannifin Canada Stauff Canada Ltd.

Drive Products Hawe North America Higginson Equipment Inc. Hurricane Pump Distribution KSB Pumps Inc. Netzsch Canada Pentair Canada Inc. Toro Hydraulic & Machinery Viking Pump of Canada Wainbee Limited

RESERVOIR TANKS

PUMPS: ROTARY POSITIVE REPLACEMENT

RINGS: BACKUP

Drive Products Higginson Equipment Inc. Parker Hannifin Canada Setpoint Technologies Toro Hydraulic & Machinery Viking Pump of Canada Webster Instruments

PUMPS: VACUUM

ACE Manufacturing Metals Ltd. Aerzen Blowers/Compressors of Cdn Drive Products Higginson Equipment Inc. Nash, A Gardner Denver Product Omega Parker Hannifin Canada Wainbee Limited

PUMPS: VARIABLE DISPLACEMENT

ALA Industries Limited Drive Products Feldcamp Equipment Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. The Oilgear Company Parker Hannifin Canada Toro Hydraulic & Machinery Viking Pump of Canada Wainbee Limited

PUMPS: WATER

Drive Products Hurricane Pump Distribution KSB Pumps Inc. Omega Pentair Canada Inc. Plad Equipment Viking Pump of Canada

Berendsen Fluid Power Drive Products Festo Great Lakes Hydraulics Inox-Tech Canada NCA Ltd. Oil-Rite Corporation Parker Hannifin Canada Toro Hydraulic & Machinery C.W. Marsh Company Hercules Sealing Prod Canada Toro Hydraulic & Machinery

RINGS: PISTON

Hercules Sealing Prod Canada Hi-Tech Seals Inc. Nuraseal Co. Toro Hydraulic & Machinery

RINGS: RUBBER DIAPHRAGM RPM Mechanical Inc. Vicone High Performance Rubber

RINGS: WEAR

Hercules Sealing Prod Canada Hi-Tech Seals Inc. HMI Wearing & Bearing Products Nuraseal Co. Toro Hydraulic & Machinery

RINGS: WIPER

Hercules Sealing Prod Canada Hi-Tech Seals Inc. HMI Wearing & Bearing Products Nuraseal Co. Toro Hydraulic & Machinery

SEALANTS: THREAD John Crane Canada X-Pando Products Co.

SEALS: FITTINGS

Daemar Inc. Seal Master Corporation SKF Machined Seals & Plastics Spaenaur Inc.

SEALS: GENERAL

Fabco-Air Inc. Lenâ&#x20AC;&#x2122;s Equipment Company Parker Hannifin Canada

Daemar Inc. Hercules Sealing Prod Canada Hi-Tech Seals Inc. Nuraseal Co. Seal Master Corporation SKF Machined Seals & Plastics Tuffee Vicone High Performance Rubber

REGULATORS: HYDRAULIC

SEALS: KITS

RECEIVERS, PNEUMATIC

Great Lakes Hydraulics Higginson Equipment Inc. Parker Hannifin Canada Pelmar Engineering Ltd. Toro Hydraulic & Machinery

REGULATORS: PNEUMATIC Air Logic ASCO Numatics Beswick Engineering Co Inc. Clippard Instrument Laboratory Cords Canada Limited Fabco-Air Inc. Festo Furneco International Great Lakes Hydraulics Higginson Equipment Inc. Humphrey Automation Inc. John Sherman Agencies Kuritec Corporation Parker Hannifin Canada Rubberline Products Ltd.

REGULATORS: VACUUM Great Lakes Hydraulics Higginson Equipment Inc.

57

Parker Hannifin Canada

Daemar Inc. Drive Products Hercules Sealing Prod Canada Hi-Tech Seals Inc. Seal Master Corporation SKF Machined Seals & Plastics

SEALS: MECHANICAL

Daemar Inc. Garnitures Expert Seal Inc. John Crane Canada Vicone High Performance Rubber Viking Pump of Canada

SEALS: O-RING-ELASTOMERIC Daemar Inc. Garnitures Expert Seal Inc. Hercules Sealing Prod Canada Hi-Tech Seals Inc. HMI Wearing & Bearing Products John Crane Canada Nuraseal Co. RPM Mechanical Inc. Seal Master Corporation SKF Machined Seals & Plastics Spaenaur Inc.

March/April | 2013

13-04-09 1:15 PM

58

ProductListings Vicone High Performance Rubber

SEALS: O-RING-METALLIC Daemar Inc. Hercules Sealing Prod Canada SKF Machined Seals & Plastics

SEALS: O-RING-PLASTOMERIC Daemar Inc. Hercules Sealing Prod Canada HMI Wearing & Bearing Products SKF Machined Seals & Plastics

SEALS: OIL

Daemar Inc. Hercules Sealing Prod Canada Hi-Tech Seals Inc. Seal Master Corporation SKF Machined Seals & Plastics Vicone High Performance Rubber

SEALS: RUBBER DIAPHRAGM Daemar Inc. RPM Mechanical Inc. Seal Master Corporation SKF Machined Seals & Plastics Vicone High Performance Rubber

SEALS: RUBBER HYDRAULIC Daemar Inc. Drive Products Hercules Sealing Prod Canada Nuraseal Co. Seal Master Corporation SKF Machined Seals & Plastics Vicone High Performance Rubber

SENSORS

Pinnacle Systems, Inc.

SENSORS: DISPLACEMENT Chartwell Automation Inc. Electromate Omega Servo-Robot Inc. Toro Hydraulic & Machinery

SENSORS: PRESSURE ASCO Valve Canada

Berendsen Fluid Power Chartwell Automation Inc. Clippard Instrument Laboratory Drive Products Festo Hydac Corporation Hydraflow-Pumptech Fluid Power Lynch Fluid Controls Omega Parker Hannifin Canada PQ Systems Ltd. SNS Automation Products Stauff Canada Ltd. Switching Solutions Inc. Toro Hydraulic & Machinery Wainbee Limited Webster Instruments

SENSORS: ULTRASONIC FLUID LEVEL

Skeans Eng & Mach Ltd. Taylor Devices Inc.

Toro Hydraulic & Machinery Wainbee Limited

SILENCERS & MUFFLERS

SOLENOID VALVES: PROPORTIONAL

Exair Corporation Festo La Société Waircom N.R. Murphy Limited Nett Technologies Inc.

SLEEVES, BOOTS

Elasto Proxy Inc. Parker Hannifin Canada

SLIDES, PNEUMATIC ASCO Numatics Fabco-Air Inc. Festo Parker Hannifin Canada

Carlo Gavazzi (Canada) Inc. Chartwell Automation Inc. Davis Controls Ltd. Drive Products Madison Company Omega Switching Solutions Inc. Toro Hydraulic & Machinery Wainbee Limited

SOFTWARE: FLUID POWER COMPONENT SELECTION

SHAFTING

ASCO Numatics Clippard Instrument Laboratory Compressor Valve Canada Ltd. Cross Mfg Inc. Drive Products Durham Pneumatic Automation Exair Corporation Fabco-Air Inc. Festo Great Lakes Hydraulics Higginson Equipment Inc. Nett Technologies Inc. Norgas Controls Omega Parker Hannifin Canada Pelmar Engineering Ltd. Rubberline Products Ltd. SNS Automation Products

Electromate

SHIMS

Daemar Inc. Dendoff Springs Nett Technologies Inc. Spaenaur Inc.

SHOCK ABSORBERS Ace Controls Inc. ASCO Numatics BSF, Inc. Dendoff Springs Festo Parker Hannifin Canada Rotator Products Ltd. RPM Mechanical Inc.

Parker Hannifin Canada

SOFTWARE: FLUID POWER SYSTEM DESIGN Parker Hannifin Canada Simerics Inc.

SOLENOID VALVES: GENERAL PURPOSE

Clippard Instrument Laboratory Compressor Valve Canada Ltd. Cross Mfg Inc. Drive Products Festo Fluid Power Sales, Inc. Hawe North America Omega Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

SPRINGS: AIR

Dendoff Springs Taylor Devices Inc. Wainbee Limited

SPRINGS: GAS Ace Controls Inc. Dendoff Springs

STRAINERS/ DIFFUSERS Berendsen Fluid Power Drive Products Filtramax Inc. Great Lakes Hydraulics Higginson Equipment Inc. Toro Hydraulic & Machinery Wainbee Limited

SWITCHES: FLUID LEVEL Chartwell Automation Inc. Furneco International Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation Intempco Controls Ltd. Madison Company Oil-Rite Corporation Omega Parker Hannifin Canada Switching Solutions Inc.

Systems & Solutions Powered by Hydraulics Pneumatics Electromechanical Vacuum Filtration Industrial Power Tools Engineering & Design Manufacturing & Assembly Service & Repairs

PERFORMANCE, RELIABILITY, AVAILABILITY 1-888-924-6233 www.wainbee.com Vancouver I Edmonton I Toronto I Montreal Prince George • Calgary • Saskatoon • Winnipeg Kitchener • Quebec • Sept-Îles • Chicoutimi • Dartmouth March/April | 2013

48-61-FP-DES.2.indd 58

www.design-engineering.com

13-04-09 1:15 PM

ProductListings SWITCHES: PRESSURE

Air Logic Chartwell Automation Inc. Clippard Instrument Laboratory Drive Products Festo Furneco International Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. Intempco Controls Ltd. John Sherman Agencies Madison Company MICO, Incorporated Parker Hannifin Canada Switching Solutions Inc. Toro Hydraulic & Machinery

SWITCHES: TEMPERATURE Carlo Gavazzi (Canada) Inc. Chartwell Automation Inc. Drive Products Furneco International Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation Intempco Controls Ltd. Omega Parker Hannifin Canada Switching Solutions Inc.

SWIVEL JOINTS: HYDRAULIC Berendsen Fluid Power Climax Company Ltd. HANSA-FLEX Hydraulics Canada Nuraseal Co. Scott Rotary Seals Toro Hydraulic & Machinery Wainbee Limited

SWIVEL JOINTS: PNEUMATIC Festo Scott Rotary Seals Wainbee Limited

TACHOMETERS/STROBOSCOPES Electro-Meters Co. John Sherman Agencies Maxon Precision Motors, Inc. Omega

TEST EQUIPMENT: HYDRAULIC Berendsen Fluid Power CEJN Industrial Corp.

Drive Products Eastern Fluid Power Inc. Great Lakes Hydraulics Hydac Corporation Lifco Hydraulics Max Machinery Inc. Parker Hannifin Canada Pneu-Hyd Industries Ltd. PSI Fluid Power Ltd. Stauff Canada Ltd. Toro Hydraulic & Machinery Wainbee Limited Webster Instruments

TEST EQUIPMENT: PNEUMATIC Fabco-Air Inc. Great Lakes Hydraulics Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

TESTING INSTRUMENTS Electro-Meters Co. Omega Parker Hannifin Canada Servo-Robot Inc. Webster Instruments

THREAD PROTECTORS Daemar Inc. Hi-Tech Seals Inc.

THRUSTERS, LINEAR Cowper Inc.

TRANSDUCERS: ELECTRO-PNEUMATIC Festo John Sherman Agencies Omega Parker Hannifin Canada Switching Solutions Inc.

TRANSDUCERS: PRESSURE ASCO Valve Canada Berendsen Fluid Power Davis Controls Ltd.

www.design-engineering.com

48-61-FP-DES.2.indd 59

Drive Products Festo Great Lakes Hydraulics Hydac Corporation John Sherman Agencies Madison Company Omega Parker Hannifin Canada PQ Systems Ltd. Switching Solutions Inc.

VACUUM CUPS

ASCO Numatics Exair Corporation Festo Higginson Equipment Inc. Humphrey Automation Inc. Parker Hannifin Canada Wainbee Limited

VACUUM DEHYDRATORS

TRANSMISSIONS: HYDRODYNAMIC Toro Hydraulic & Machinery

Filtramax Inc. Hy-Pro Filtration Hydac Corporation

TRANSMISSIONS: HYDROSTATIC

VALVE CIRCUITS

Drive Products Flodraulic Group Lifco Hydraulics PSI Fluid Power Ltd. Toro Hydraulic & Machinery

TUBE FABRICATING

BSF, Inc. Eastern Fluid Power Inc. HANSA-FLEX Hydraulics Canada Hyseco Fluid Systems Ltd Marmon/Keystone Canada Inc. NewAge Industries Inc. Parker Hannifin Canada Winnipeg Fluid System Technologies

Berendsen Fluid Power Higginson Equipment Inc. Parker Hannifin Canada Poclain Hydraulics Toro Hydraulic & Machinery Wainbee Limited

VALVE SPOOLS, DIRECTIONAL CONTROL HYDRAULIC

Drive Products Parker Hannifin Canada

Berendsen Fluid Power Drive Products Hawe North America Higginson Equipment Inc. Lexair Inc. Parker Hannifin Canada Parker Hannifin QCD/Snap-tite Operation Toro Hydraulic & Machinery Wainbee Limited

TUBING & HOSE

VALVES AIR: CHECK

TUBE/HOSE CLEANING EQUIPMENT

Clippard Instrument Laboratory Coilhose Pneumatics DK-LOK Ontario Inc. Fairview Fittings/Mfg Ltd. Festo Kuritec Corporation Maritime Compressor Marmon/Keystone Canada Inc. NewAge Industries Inc. Parker Hannifin Canada Patel Hose Inc. RPM Mechanical Inc. Rubberline Products Ltd. SNS Automation Products Strictly Sales & Service Swagelok Toro Hydraulic & Machinery Winnipeg Fluid System Technologies

TUBING: ALUMINIUM

Marmon/Keystone Canada Inc.

TUBING: COPPER

Great Lakes Copper Inc.

TUBING: PLASTIC

Boyaux et Raccords Green Line Clippard Instrument Laboratory Cords Canada Limited Drive Products Festo Higginson Equipment Inc. Humphrey Automation Inc. Kuritec Corporation NewAge Industries Inc. Omega Pesco Sales

TUBING: RUBBER

Elasto Proxy Inc. Kuritec Corporation NewAge Industries Inc. RPM Mechanical Inc. Seal Master Corporation Vicone High Performance Rubber

TUBING: STAINLESS STEEL

DK-LOK Ontario Inc. HANSA-FLEX Hydraulics Canada Inox-Tech Canada Marmon/Keystone Canada Inc. Swagelok Winnipeg Fluid System Technologies

TUBING: STEEL

Drive Products HANSA-FLEX Hydraulics Canada Marmon/Keystone Canada Inc. Parker Hannifin Canada

TURBINE OIL COALESCERS Hy-Pro Filtration

UNIONS, ROTATING Nuraseal Co.

Air Logic Beswick Engineering Co Inc. Clippard Instrument Laboratory DK-LOK Ontario Inc. Fabco-Air Inc. Festo Higginson Equipment Inc. La Société Waircom Lexair Inc. Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

VALVES AIR: CIRCUIT LOGIC CONTROL Fabco-Air Inc. Festo Parker Hannifin Canada Wainbee Limited

VALVES AIR: DECELERATION Clippard Instrument Laboratory Parker Hannifin Canada Wainbee Limited

VALVES AIR: DIRECTIONAL ASCO Numatics Bimba Manufacturing Co. Clippard Instrument Laboratory Drive Products Fabco-Air Inc. Festo Great Lakes Hydraulics Higginson Equipment Inc. Humphrey Automation Inc. La Société Waircom Lexair Inc. Mullen Fluid Power Omega Parker Hannifin Canada Rubberline Products Ltd. Toro Hydraulic & Machinery Tuffee Wainbee Limited

VALVES AIR: DRIVE

Toro Hydraulic & Machinery Wainbee Limited

VALVES AIR: FLOW CONTROL Air Logic Beswick Engineering Co Inc. Bimba Manufacturing Co. Clippard Instrument Laboratory Fabco-Air Inc. Festo Great Lakes Hydraulics Higginson Equipment Inc. La Société Waircom Omega Parker Hannifin Canada Scott Rotary Seals Servo-Robot Inc. Toro Hydraulic & Machinery Wainbee Limited

59

VALVES AIR: PILOT OPERATED Air Logic Clippard Instrument Laboratory Festo Great Lakes Hydraulics Higginson Equipment Inc. Lexair Inc. Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

VALVES AIR: QUICK EXHAUST DUMPING Clippard Instrument Laboratory Festo Humphrey Automation Inc. Parker Hannifin Canada Wainbee Limited

VALVES AIR: RELIEF

Air Logic Fabco-Air Inc. Higginson Equipment Inc. Omega Parker Hannifin Canada Pelmar Engineering Ltd. Scott Rotary Seals Toro Hydraulic & Machinery Val-Matic Valve & Mfg. Corp.

Wainbee Limited

VALVES AIR: SEQUENCE Air Logic Clippard Instrument Laboratory Fabco-Air Inc. Festo Higginson Equipment Inc. Parker Hannifin Canada Wainbee Limited

VALVES AIR: SHUTTLE

Clippard Instrument Laboratory Drive Products Fabco-Air Inc. Festo Higginson Equipment Inc. Lexair Inc. Omega Parker Hannifin Canada Wainbee Limited

VALVES AIR: SOLENOID ASCO Numatics Bimba Manufacturing Co. Drive Products Fabco-Air Inc. Festo Great Lakes Hydraulics Higginson Equipment Inc. La Société Waircom Lexair Inc. Omega Parker Hannifin Canada Rubberline Products Ltd. Skeans Eng & Mach Ltd. Toro Hydraulic & Machinery Wainbee Limited

VALVES AIR: TIME DELAY Festo Parker Hannifin Canada Swagelok Wainbee Limited

VALVES HYDRAULIC: AIR BLEED Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: CHECK PILOT OPERATED Brand Hydraulics Drive Products Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation MICO, Incorporated Parker Hannifin Canada Parker Hannifin QCD/Snap-tite Operation Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: COUNTERBALANCE Drive Products Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. Hydac Corporation

March/April | 2013

13-04-09 1:15 PM

60

ProductListings Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

Wainbee Limited Webster Instruments

VALVES HYDRAULIC: DECELERATION

Brand Hydraulics Drive Products Great Lakes Hydraulics Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited Webster Instruments

Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: DIRECTIONAL ALA Industries Limited Brand Hydraulics Cross Mfg Inc. Drive Products Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. Humphrey Automation Inc. Hydac Corporation Hydraflow-Pumptech Fluid Power Hypower Systems Lexair Inc. Mullen Fluid Power Parker Hannifin Canada Parker Hannifin QCD/Snap-tite Operation PSI Fluid Power Ltd. SunSource Tech Serv (Cnd) Ltd Toro Hydraulic & Machinery Tuffee Wainbee Limited Webster Instruments

Wainbee Limited

VALVES HYDRAULIC: FLOW DIVIDERS

VALVES HYDRAULIC: MINIATURE Brand Hydraulics Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: MOBILE Brand Hydraulics Drive Products Flodraulic Group Hydac Corporation MICO, Incorporated Parker Hannifin Canada PSI Fluid Power Ltd. SunSource Tech Serv (Cnd) Ltd Toro Hydraulic & Machinery Wainbee Limited Webster Instruments

VALVES HYDRAULIC: PILOT OPERATED

VALVES HYDRAULIC: FLOW CONTROL ALA Industries Limited Brand Hydraulics Drive Products Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. Hydac Corporation Lifco Hydraulics MICO, Incorporated Parker Hannifin Canada Parker Hannifin QCD/Snap-tite Operation Pelmar Engineering Ltd. Scott Rotary Seals Toro Hydraulic & Machinery

ALA Industries Limited Brand Hydraulics Drive Products Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation Lexair Inc. MICO, Incorporated Parker Hannifin Canada Parker Hannifin QCD/Snap-tite Operation Pelmar Engineering Ltd. Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: PLASTIC DIAPHRAGM Toro Hydraulic & Machinery

Specify CROSS Fluid Power…

PRESSURE, FLOW and DIRECTIONAL VALVES

GEAR PUMPS and MOTORS

RELIEF VALVES

TIE ROD CYLINDERS

63 years experience, our personal commitment to continuous improvement, quality and customer satisfaction — gives you the best product at the right price.

Call, fax or e-mail today for complete information.

CROSS A MERIC E IN A. AD ..

M

SERVING THE WORLD

100 JAMES H. CROSS BLVD. LEWIS, KS 67552 (620) 324-5525 FAX (620) 324-5737 E-mail: info@crossmfg.com ISO 9001 CERTIFIED

VALVES HYDRAULIC: PRESSURE CONTROL ALA Industries Limited Drive Products Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. Hydac Corporation MICO, Incorporated Parker Hannifin Canada Pelmar Engineering Ltd. Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: PRESSURE REDUCING Drive Products Great Lakes Hydraulics Hawe North America Higginson Equipment Inc. Hydac Corporation MICO, Incorporated Parker Hannifin Canada Pelmar Engineering Ltd. Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: PROPORTIONAL ALA Industries Limited Brand Hydraulics Cross Mfg Inc. Drive Products Eaton Feldcamp Equipment Flodraulic Group Hawe North America Hydac Corporation Lynch Fluid Controls MICO, Incorporated Norcan Fluid Power Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: RELIEF UNLOADING ALA Industries Limited Brand Hydraulics Drive Products Great Lakes Hydraulics Higginson Equipment Inc. Hydac Corporation Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: SEQUENCE Great Lakes Hydraulics Higginson Equipment Inc. Parker Hannifin Canada Scott Rotary Seals Wainbee Limited

VALVES HYDRAULIC: SERVO ALA Industries Limited Parker Hannifin Canada Toro Hydraulic & Machinery Wainbee Limited

VALVES HYDRAULIC: SHUTTLE Brand Hydraulics Drive Products Great Lakes Hydraulics Parker Hannifin Canada Wainbee Limited

VALVES HYDRAULIC: SURGE DAMPING Parker Hannifin Canada Pelmar Engineering Ltd. Wainbee Limited

VALVES PNEUMATIC, MINIATURE ASCO Valve Canada Beswick Engineering Co Inc. Clippard Instrument Laboratory Compressor Valve Canada Ltd. Cowper Inc. Fabco-Air Inc. Festo Hi-Tech Controls Parker Hannifin Canada SMC Pneumatics (CDA) Ltd. Wainbee Limited Winnipeg Fluid System Technologies Xomox Canada Ltd.

S S

VALVES: BALL

Boyaux et Raccords Green Line DK-LOK Ontario Inc. Drive Products Fairview Fittings/Mfg Ltd. Festo Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Higginson Equipment Inc. Hydac Corporation Inserta Products Inc. John Sherman Agencies Omega Parker Hannifin Canada Servo-Robot Inc. Setpoint Technologies Stauff Canada Ltd. Toro Hydraulic & Machinery Val-Matic Valve & Mfg. Corp.

Wainbee Limited Winnipeg Fluid System Technologies Xomox Canada Ltd.

T

VALVES: BLEED

Clippard Instrument Laboratory DK-LOK Ontario Inc. Higginson Equipment Inc. Omega Wainbee Limited

VALVES: BUTTERFLY

Drive Products Festo Great Lakes Hydraulics John Sherman Agencies Setpoint Technologies Val-Matic Valve & Mfg. Corp.

Wainbee Limited Xomox Canada Ltd.

VALVES: CHECK

Air Logic Clippard Instrument Laboratory DK-LOK Ontario Inc. Drive Products Fabco-Air Inc. Festo Great Lakes Hydraulics HANSA-FLEX Hydraulics Canada Hawe North America Higginson Equipment Inc. Hydac Corporation Inserta Products Inc. Lexair Inc. Parker Hannifin Canada Parker Hannifin QCD/Snap-tite Operation Setpoint Technologies Swagelok Toro Hydraulic & Machinery Val-Matic Valve & Mfg. Corp.

Wainbee Limited Winnipeg Fluid System Technologies Xomox Canada Ltd.

VALVES: GATE

Drive Products Festo Great Lakes Hydraulics Wainbee Limited

VALVES: METERING

Great Lakes Hydraulics Higginson Equipment Inc. Omega Pelmar Engineering Ltd. Winnipeg Fluid System Technologies

VALVES: PLUGS

Drive Products Norgas Controls Val-Matic Valve & Mfg. Corp.

Winnipeg Fluid System Technologies Xomox Canada Ltd.

Th wi kin ad wi ax

VALVES: STOP

Toro Hydraulic & Machinery

VALVES: WATER

Clippard Instrument Laboratory Drive Products Festo Higginson Equipment Inc. Lexair Inc. Omega Parker Hannifin Canada Pelmar Engineering Ltd. Val-Matic Valve & Mfg. Corp.

Xomox Canada Ltd.

SO March/April | 2013

48-61-FP-DES.2.indd 60

www.design-engineering.com

13-04-09 1:15 PM V60N-US.indd

Slim Dimensions.

Solid Performance.

The new V60N high-pressure pump with 130 ccm.

The new axial piston pump for the ancillary drive from HAWE Hydraulics—V60N-130—excels with its slim dimensions and reliable performance. The 400-bar operating pressure is one of a kind—a genuine high-pressure pump. Drive protection integrated in the standard version adds safety to your vehicle drive. The pump can be adapted to precisely meet your requirements with a wide selection of flanges and controllers. Discover the comprehensive product range of axial piston pumps for industrial and mobile applications at www.haweusa.com.

S O L U T I O N S F O R A WO R L D U N D E R P R E S S U R E . W W W. H AW E U SA . C O M

48-61-FP-DES.2.indd 61 V60N-US.indd 1

13-04-09 1:15 PM 3/14/2013 12:42:27 PM

Grow your revenue without killing your budget

12 Million+ L I S T R E N TA L S E R V I C E Improve your reach and grow your revenue with SCOTT’S Contact Lists. Select from over 12 million executive contacts spanning every industry sector and job function imaginable.

EMAIL MARKETING SERVICE SCOTT’S will help turn your emails into revenue with our one-stop-shop email marketing service.

Marketing solutions

that nurture results

At Scott’s Directories, we don’t just help you find and reach your target audience. We offer affordable, efficient and effective ways to engage and build your customer base.

SCOTT’S Integrated Marketing Solutions

We’ll help you target the right audience, create

Contact Lists. Data Processing Services . Email Marketing . Fax Broadcasting

captivating emails, ensure high “inbox” delivery of

Video Services . Custom Publishing . Newsletter Design . Sponsored Articles . etc.

your email message, and track your email campaign so you can see how your audience responded.

D ATA P R O C E S S I N G S E R V I C E S Understand your customers better, and sell and market more effectively by improving the depth and accuracy of your database. Our data services

1.800.387.6598

solutions@scottsdirectories.com ScottsDirectories.com

includes Data Append, Reverse Appending, Data Hygiene, Data Management, and more.

PARTNERS IN YOUR SUCCESS Ref: SMSA13P1

2013_SCT_MktSvcAd-DesignEngMag_SMSA13H.indd 1 62-72.1-FP-DES.indd 62

13-03-27 10:44 AM 13-04-08 2:45 PM

SupplierListings 63 ACE CONTROLS INC.

ASCO NUMATICS

Manufacturer

Manufacturer & Distributor

23435 Industrial Pk Dr Farmington Hills MI 48335 USA Tel: 248-476-0213 Fax: 248-476-2470 Email: shocks@acecontrols.com Web: www.acecontrols.com Distributors: Cowper, St. John, NB; Kingston, ON; London, ON; Markham, ON; Cowper Inc., Lachine, QC; Peerless Engineering Sales Ltd., Burnaby, BC; Prince George, BC; Edmonton, AB; VickersWarnick Ltd., Mississauga, ON; Stoney Creek, ON; Waterloo, ON

17 Airport Rd Brantford ON N3T 5M8 Tel: 519-758-2700 Fax: 519-758-5540 Email: asconumaticscanada@emerson.com Web: www.asconumatics.ca Branches: Saint-Laurent, QC Manufacturers: Alado; Enertrols; Vaccon Vacuum Distributors: Visit our Website

ACE MANUFACTURING METALS LTD. Manufacturer PO Box 500 Bittern Lake AB T0C 0L0 Tel: 780-352-7145 Fax: 780-352-7147 Email: info@acemfg.com Web: www.acemfg.com

ASCO VALVE CANADA Manufacturer & Distributor 17 Airport Rd Brantford ON N3T 5M8 Tel: 519-758-2700 Fax: 519-758-5540 Email: asconumaticscanada@emerson.com Web: www.ascovalve.ca Branches: St. Laurent, QC

ADACONN Manufacturer 538 Township Line Rd Blue Bell PA 19422 USA Tel: 215-643-1900 Fax: 215-643-4017 Web: www.adaconn.com Distributors: Berendsen Fluid Power, Scarborough, ON; HyPower, Saskatoon, SK; Kinecor, Lachine, QC; Wainbee Ltd., Mississauga, ON

AERZEN BLOWERS & COMPRESSORS OF CANADA INC. Manufacturer 1995 montée Labossière Vaudreuil-Dorion QC J7V 8P2 Tel: 450-424-3966 Fax: 450-424-3985 Email: alaric.haerens@aerzen.ca Web: www.aerzen.ca

AIR LOGIC Manufacturer 5102 Douglas Ave Racine WI 53402-2064 USA Tel: 262-639-9035 Fax: 262-639-5996 Email: airlogic@air-logic.com Web: www.air-logic.com Distributors: Cowper Inc., Lachine, QC; Peerless Engineering Sales Ltd, Burnaby, BC

AIRVACOX LTÉE Manufacturer 85 rue des Buissons Lévis QC G6V 5B6 Tel: 418-835-0142 Fax: 418-835-0297 Email: jmfortin@coair.qc.ca

ALA INDUSTRIES LIMITED Distributor 1150 South Point Cir Suite D Valparaiso IN 46385 USA Tel: 219-465-4197 Fax: 219-477-4194 Email: alaindustries@yuken-usa.com Web: www.yuken-usa.com Manufacturers: Fluid Press; Settima; Vivoil; Yuken

ANDY BAUMEN ASSOCIATES LTD. Manufacturer 6-871 Equestrian Crt Oakville ON L6L 6L7 Tel: 905-828-2600 Fax: 905-469-5606 Email: info@andybaumenltd.com Web: www.andybaumenltd.com

API HEAT TRANSFER Manufacturer 2777 Walden Ave Buffalo NY 14225 USA Tel: 716-684-6700 Fax: 716-684-2155 Email: sales@apiheattransfer.com Web: www.apiheattransfer.com

BERENDSEN FLUID POWER Manufacturer & Distributor 35A Ironside Cr Scarborough ON M1X 1G5 Tel: 416-335-5557 Fax: 416-335-8844 Email: info@bfpna.com Web: www.bfpna.com Branches: Calgary, AB; Edmonton, AB; Vancouver, BC; Winnipeg, MB; Dartmouth, NS; London, ON; Markham, ON; Stoney Creek, ON; Sudbury, ON; Timmins, ON; Montreal, QC; Saskatoon, SK Manufacturers: Auburn Gear; Barksdale; Donaldson; Eaton/CutlerHammer; Eaton-Vickers; Olaer; Sauer-Danfoss; Thermal Transfer Company Profile:Berendsen Fluid Power is a North American fluid power integrator with sales and service support in 50 locations throughout the United States and Canada. Berendsen’s expertise is in the supply, design, manufacture and support of Industrial and Mobile components and Motion Control packages.

Berendsen also provides complete control systems to compliment any hydraulic design.

BERG CHILLING SYSTEMS INC. Manufacturer 51 Nantucket Blvd Scarborough ON M1P 2N5 Tel: 416-755-2221 Fax: 416-755-3874 Email: bergsales@berg-group.com Web: www.berg-group.com

BESWICK ENGINEERING CO INC. Manufacturer 284 Ocean Rd Greenland NH 03840-2442 USA Tel: 603-433-1188 Fax: 603-433-3313 Email: besales@beswick.com Web: www.beswick.com

BIMBA MANUFACTURING CO. Manufacturer 25150 S Governors Highway University Park IL 60484 USA Tel: 708-534-8544 Fax: 708-235-2014 Email: cs@bimba.com Web: www.bimba.com Distributors: Acromag ; Cowper Inc, Lachine, QC; CPI Automation Ltd., Mississauga, ON; Skeans Engineering, Coquitlam, BC

BOSCH REXROTH CANADA Manufacturer 490 Prince Charles Dr S Welland ON L3B 5X7 Tel: 905-735-0510 Fax: 905-735-5646 Email: info@boschrexroth.ca Web: www.boschrexroth.ca Branches: Edmonton, AB; Burnaby, BC; Fredericton, NB; Dartmouth, NS; Burlington, ON; Jonquière, QC; Longueuil, QC; Saskatoon, SK

BOYAUX ET RACCORDS GREEN LINE Manufacturer 9395 rte Transcanadienne Saint-Laurent QC H4S 1V3 Tel: 514-333-4447 Fax: 514-333-0857 Email: serge.bourbonnais@greenlinehose.com Web: www.greenlinehose.com

www.design-engineering.com

3-27 10:44 AM 62-72.1-FP-DES.indd 63

BRAND HYDRAULICS CO. Manufacturer 2332 S 25th St Omaha NE 68105 0069-0069 USA Tel: 402-344-4434 Fax: 402-341-5419 Email: sales@brand-hyd.com Web: www.brand-hyd.com Distributors: Visit our Website

BRIM G & H FLUID HANDLING PRODUCTS INC. Distributor 1318 Britannia Rd E Mississauga ON L4W 1C8 Tel: 905-670-0140 Fax: 905-670-8246 Email: brim@bellnet.ca Web: www.brimgandh.com Manufacturers: Crane Pumps & Systems; Humphrey Automation; Olaer Fawcett Christie; Rieger Sanitary Valves

BRUNO’S OF CHILLIWACK Manufacturer 18-43915 Industrial Way Chilliwack BC V2R 3A4 Email: BrunosofChilliwack@shaw.ca Web: /www.boctruckparts.com

BSF, INC. Manufacturer & Distributor PO Box 459 Vandalia OH 45377 USA Tel: 937-890-6121 Fax: 937-890-0974 Email: sales@bsfinc.net Web: www.bsfinc.net Manufacturers: KTR; LoveJoy; Magnaloy

C.W. MARSH COMPANY Manufacturer 1385 Hudson St Muskegon MI 49441 USA Tel: 231-722-3781 Fax: 231-728-8283 Email: david@cwmarsh.com Web: www.cwmarsh.com

CAN-AM INSTRUMENTS LTD. Distributor 2851 Brighton Rd Oakville ON L6H 6C9 Tel: 905-829-0030 Fax: 905-829-4701 Email: support@can-am.net Web: www.can-am.net Branches: Calgary, AB; Halifax, NS Manufacturers: ACR; Arjay Engineering; Brookfield Engineering; Enmet; Hach; Highland Tank; MJK; Racine; Telog

CARIBOO HOUSE OF HOSE & BELTING Manufacturer PO Box 630 100 Mile House BC V0K 2Z0 Tel: 250-791-7270 Fax: 250-791-9219 Email: chouseofhoseandbelting@telus.net

CARLO GAVAZZI (CANADA) INC. Manufacturer 8-2660 Meadowvale Blvd Mississauga ON L5N 6M6 Tel: 905-542-0979 Fax: 905-542-2248 Email: lfarara@carlogavazzi.com

CEJN INDUSTRIAL CORP. Manufacturer 4 Snowberry Crt Caledon Village ON L7K 0B5 Tel: 519-927-0566 Fax: 519-927-0567 Email: barney.draper@cejnusa.com Web: www.cejn.com

March/April | 2013

13-04-08 2:45 PM

64

SupplierListings CHARTWELL AUTOMATION INC.

DIEQUA CORPORATION

Manufacturer & Distributor

Manufacturer

1-140 Duffield Dr Markham ON L6G 1B5 Tel: 905-513-7100 Fax: 905-513-7101 Email: sales@chartwell.ca Web: www.chartwell.ca

CROSS MFG INC.

180 Covington Dr Bloomingdale IL 60108 USA Tel: 630-980-1133 Fax: 630-980-1232 Email: info@diequa.com Web: www.diequa.com

CHECKFLUID INC.

Manufacturer

DK-LOK ONTARIO INC.

Manufacturer 4070 Eastgate Cr London ON N6L 1B2 Tel: 519-652-6373 Fax: 519-652-0392 Email: info@checkfluid.com Web: www.checkfluid.com

CLIMAX COMPANY LTD. Distributor 16883 boul Hymus Kirkland QC H9H 3L4 Tel: 514-426-2243 Fax: 514-426-7126 Email: sross@climaxcompany.com Web: www.climaxcompany.com Manufacturers: Alemite; Bijur Delimon International; Cloud Sellers Cleaning Systems; Farval; Kirkpatrick Wire Rope Lubrication Systems; Marsh Bellofram Corp.; Oil Rite Corp.; Parker Hannifin Corp.; Simatec; Trico; Winters Instruments

210-11011 King St Overland Park KS 66210 USA Tel: 620-324-5525 Fax: 620-324-5737 Email: info@crossmfg.com Web: www.crossmfg.com

CYCLO-INDEX 1129 W Fairview Ave Carthage MO 64836 USA Tel: 417-358-6136 Fax: 417-358-8629 Email: info@cycloindex.com Web: www.cycloindex.com

DRIVE PRODUCTS INC. Manufacturer & Distributor

Distributor

Manufacturer 7390 Colerain Avenue Cincinnati OH 45239 USA Tel: 513-521-4261 Fax: 513-521-4464 Email: sales@clippard.com Web: www.clippard.com Distributors: Wainbee Ltd., Mississauga, ON

COILHOSE PNEUMATICS Manufacturer 19 Kimberly Rd East Brunswick NJ 8816 USA Tel: 732-390-8480 Fax: 732-390-9693 Email: info@coilhose.com Web: www.coilhose.com Distributors: Airfast Distributors, Surrey, BC; Airmax, Granby, QC; Airtek, Montreal, QC; CFA Industries Inc., Aurora, ON

6-720 South Service Rd Stoney Creek ON L8E 5S7 Tel: 289-649-1046 Fax: 289-649-1049 Email: sales@dklokontario.com Web: www.dklokontario.com Manufacturers: A-T Controls; DK Tech; Flex-Pression

Manufacturer

DAEMAR INC.

CLIPPARD INSTRUMENT LABORATORY, INC.

Distributor

861 Cranberry Crt Oakville ON L6L 6J7 Tel: 905-847-6500 Fax: 905-847-6943 Email: sales@daemarinc.com Web: www.daemar.com Branches: Edmonton, AB; Dorval, QC Manufacturers: Caplugs; DMR; JM Clipper; Kalrez; Keystock; RotoClamp; Rotor-Clip; Shim Stock; Spirolox Company Profile:Daemar manages the sourcing and delivery of millions of Essential Components such as: retaining rings, shaft seals, o-rings, bushings, disc springs, shim, keystock and Caplugs protective caps & plugs to the manufacturing and MRO marketplace. Industry applications are broad; from high volume assembly lines requiring design assistance and supply chain management, all the way to the simple replacement of a single component for maintenance. Trust Daemar to solve your essential component supply challenges.

DAVIS CONTROLS LTD. Distributor

165 Shawson Dr Mississauga ON L4W 1T7 Tel: 905-564-5800 Fax: 905-564-5799 Email: marketing@driveproducts.com Web: www.driveproducts.com Manufacturers: APSCO; Blackmer; Brand; Brevini; Dixon; Eaton; Force America; Gardner Denver; Hydro Leduc; Internormen; Magnaloy; Miratron; Muncie; OMSI; Roper; Thermal Transfer Products; Tulsa Winch Group; Webtec; White; Yuken

DURHAM PNEUMATIC AUTOMATION Distributor 36 Horseshoe Dr Whitby ON L1N 8E9 Tel: 905-665-9137 Fax: 905-665-6801 Web: www.durhampneumatic.com Manufacturers: Airmax; Humphrey; Mindman; SNS; STC

EASTERN FLUID POWER INC. Manufacturer & Distributor 4-1120 Clyde Crt Kingston ON K7P 2E4 Tel: 613-384-8884 Fax: 613-384-8887 Email: judith@efp.ca Web: www.easternfluidpower.com Manufacturers: Beka Max; Bucher Hydraulics; Burkert; Caterpillar; Humphrey; Internormen; Parker Hannifin; Sun Hydraulics Distributors: Eastern Fluid Power Inc., Kingston, ON

129 Leacrest Road Toronto ON M4G 1E7 Tel: 416-422-4325 Fax: 416-422-4570 Email: compvalve@rogers.com Web: www.compvalve.com

2200 Bristol Cir Oakville ON L6H 5R3 Tel: 905-829-2000 Fax: 905-829-2630 Email: info@daviscontrols.com Web: www.daviscontrols.com Branches: Vancouver, BC; Calgary, ON; Sarnia, ON; Montreal, QC Manufacturers: Acromag; Baldor; Balston; Danfoss Drives; Emco; Flowline; Gems Sensors; LS Industrial Systems; Wago

CORDS CANADA LIMITED

DELLNER INDUSTRIAL INC.

14615 Lone Oak Rd Eden Prairie MN 55344 USA Email: julieecarver@eaton.com Web: www.eaton.com

Manufacturer & Distributor

ELASTO PROXY INC.

COMPRESSOR VALVE CANADA LTD. Manufacturer & Distributor

Distributor 62 Densley Ave Toronto ON M6M 5E1 Tel: 416-242-6811 Fax: 416-242-6819 Email: cords@cordscanada.com Web: www.cordscanada.com Manufacturers: Arkplas Products; Bumper Specialties; Heyco; Micro Plastics; Nyltite; Richco; Stockcap; Thogus

Subsidiary of Dellner Brakes AB 8334-H Arrowridge Blvd Charlotte NC 28273 USA Tel: 401-515-4657 Fax: 401-515-4542 Email: glenn.scott@dellner-brakes.com Web: www.dellner-brakes.com Distributors: BDI Canada Inc, Mississauga, ON

COWPER INC.

DENDOFF SPRINGS

Distributor 677 7th Ave Lachine QC H8S 3A1 Tel: 514-637-6746 Fax: 514-637-5055 Email: support@cowper.ca Web: www.cowper.ca Branches: Saint John, NB; Kingston, ON; London, ON; Markham, ON Manufacturers: Ace Controls; Bimba Mfg.; Camozzi; Exair; Firestone Industrial; Norgren; Tol-O-Matic; TRD Mfg.

March/April | 2013

62-72.1-FP-DES.indd 64

Manufacturer 12045 Old Yale Rd Surrey BC V3V 3X4 Tel: 604-580-3400 Fax: 604-580-3600 Email: sales@dendoff.com Web: www.dendoff.com

DIELCO INDUSTRIAL CONTRACTORS LTD.

EATON Manufacturer

Manufacturer & Distributor 4035 Lavoisier Boisbriand QC J7H 1N1 Tel: 450-434-2744 Fax: 450-434-5998 Email: info@elastoproxy.com Web: www.elastoproxy.com Branches: Newmarket, ON

ELECTRO-METERS CO. LTD. Manufacturer & Distributor 2-900 McKay Rd Pickering ON L1W 3X8 Tel: 905-428-3413 Fax: 905-428-6086 Email: sales@electro-meters.com Web: www.electro-meters.com Branches: Calgary, AB; Saint-Laurent, QC

Manufacturer 61 Enterprise Dr London ON N6N 1A4 Tel: 519-685-2224 Fax: 519-685-6818 Email: dielco@dielco.com Web: www.dielco.com

www.design-engineering.com

13-04-09 1:31 PM

SupplierListings 65 GIR DEL HYDRAULIC Distributor

FESTO INC. Manufacturer & Distributor

ELECTROMATE Distributor 39-4300 Steeles Ave W Woodbridge ON L4L 4C2 Tel: 905-850-7447 Fax: 905-850-7451 Email: sales@electromate.com Web: www.electromate.com Manufacturers: Advanced Motion Controls; Applied Motion Products; Bayside Motion; Dyadic Systems; ElectroCraft; Exor Electronic; Galil Motion Control; Gam Gear; Groschopp; Harmonic Drive LLC; Haydon Kerk Motion Systems; Ibex Engineering; Intelligent Actuator Inc.; ITT Torque Systems; Kollmorgen; Lintech; Macron Dynamics; Maxon Motor AG; MCG; MicorE Systems; MTS-Temposonics; Netzer Precision; Nippon Pulse America; Pacific Scientific; Pittman; Quantum Devices; Rabbit Semiconductor; Servo-Tek; Shimpo Drives; Superior Electric; Tecnotion; Thomson; Tolomatic; World Encoders

EXAIR CORPORATION Manufacturer & Distributor 11510 Goldcoast Dr Cincinnati OH 45249 1621-1621 USA Tel: 513-671-3322 Fax: 513-671-3363 Email: techelp@exair.com Web: www.exair.com

F. BACON INDUSTRIEL INC. Distributor 500-189 av Labrosse Pointe-Claire QC H9R 1A3 Tel: 514-630-9990 Fax: 514-630-3755 Email: sean@f-bacon.com

FABCO-AIR INC. Manufacturer 3716 49th Rd NE Gainesville FL 32609 USA Tel: 352-373-3578 Fax: 352-375-8024 Email: fabco@fabco-air.com Web: www.fabco-air.com Distributors: Air & Hyd Supplies, Toronto, ON; BDI, Mississauga, ON; Higginson Equipment Sales, Burlington, ON; Sempress Canada Inc, Mississauga, ON

FABRICATED PLASTICS LIMITED Manufacturer 2175 Teston Rd Maple ON L6A 1T3 Tel: 905-832-8161 Fax: 905-832-2111 Email: info@fabricatedplastics.com Web: www.fabricatedplastics.com

5300 Explorer Dr Mississauga ON L4W 5G4 Email: festo.canada@ca.festo.com Web: www.festo.ca Branches: Calgary, AB; Edmonton, AB; Richmond, BC; Moncton, NB; Montréal, QC; Québec, QC Company Profile:Festo is a world-wide provider of automation solutions for factory and process automation. Supported by a global network of application specialists and local expertise, Festo uses its industry-leading knowledge to solve the most complex automation requirements of multinational customers across various industries, including Automotive, Food Processing & Packaging, Handling & Assembly, Pharmaceutical and Natural Resources. Our solutions are designed to meet the highest standards of quality and technology safety, and have been applied all over the world making Festo a reliable partner for industrial automation.

FILTRAMAX INC. Distributor 215 boul Brunswick Pointe-Claire QC H9R 4R7 Tel: 514-697-0072 Fax: 514-697-3453 Email: filters.sales@filtramax.com Web: www.filtramax.com Branches: Calgary, AB; Edmonton, AB; Mississauga, ON Manufacturers: Aircom; Airguard; Beko; Des-Case; Donaldson; Eaton; Mahle; Parker; PTI; Schroeder; Strainrite; Viledon; Walker

FLO COMPONENTS LTD. Manufacturer & Distributor 50 Admiral Blvd Mississauga ON L5T 2W1 Tel: 905-671-2355 Fax: 905-671-2358 Email: sales@flocomponents.com Web: www.flocomponents.com

FLODRAULIC GROUP Manufacturer & Distributor 45 Sinclair Ave Georgetown ON L7G 4X4 Tel: 905-702-9456 Fax: 905-702-9457 Email: flodraulic@flodraulic.com Web: www.flodraulic.com Branches: Nisku, AB; Windsor, ON Manufacturers: Comatrol; Danfoss Industrial; Eaton-Duraforce; H.E.D.; Hetronic; HKS; Hydrocontrol; Modular Remotes; Roquet; Sauer-Danfoss; Thermal Transfer Micromatic

FELDCAMP EQUIPMENT LIMITED

FURNECO INTERNATIONAL INC.

Manufacturer & Distributor

Manufacturer

701 Graham Dr North Bay ON P1B 9E6 Tel: 705-472-5885 Fax: 705-472-2819 Email: sales@feldcamp.com Web: www.feldcamp.com

926 rue Aubry St-Jean-sur-Richel QC J3B 2H9 Tel: 450-347-2111 Fax: 450-347-2117 Email: info@furneco.com Web: www.furneco.com

GARNITURES EXPERT SEAL INC. Manufacturer & Distributor 1-4405 av Thibault Saint-Hubert QC J3Y 7N1 Tel: 450-462-4663 Fax: 450-462-0488 Email: garnituresexpert@bellnet.ca Web: www.garnituresexpert.com Manufacturers: A.S.I.; Ernst; Phelps; Utex

GATES CANADA INC. Manufacturer Building 8 225 Henry St Brantford ON N3S 7R4 Tel: 519-759-4141 Fax: 519-759-4567 Web: www.gates.com

www.design-engineering.com

62-72.1-FP-DES.indd 65

Manufacturer 1010 Clarke Rd London ON N5Y 5S6 Tel: 519-455-0770 Fax: 519-455-8490 Web: www.glcopper.com

GREAT LAKES HYDRAULICS LTD. Distributor A9-5035 North Service Rd Burlington ON L7L 5V2 Tel: 905-332-1500 Fax: 905-332-9122 Email: glhydltd@greatlakeshydraulicltd.com Web: www.greatlakeshydraulicltd.com Manufacturers: Anchor Flange Co.; Cim-Tek Filters; Daman; Enertrols; Filter Products Corp.; Flow Ezy; Hedland; Hennells; Hydro-Craft; Kepner; Lenz; Marzocchi; Metaris; Nason; Neo; Northman; Numatics; OMT; PCI; Rego; Revco; Snap-Tite; Snap-Tite/ Allied; Snap-Tite/Green Top; Sofima Hydraulic Filters; Vescor Corp.; Webster Instruments; Wika

HANSA-FLEX HYDRAULICS CANADA Manufacturer 3-295 Connie Cres Concord ON L4K 5R2 Tel: 905-760-2224 Fax: 905-760-0150 Email: diana.dahnz@hansa-flex.com Company Profile:HANSA-FLEX is Europe’s leader in all areas of hydraulics. Effective solutions strongly set us apart from our competitors worldwide, with a large inventory, services ranging from spare parts to custom-made hose assemblies, with a variety of specification and dimension. Above all, we are aware that systems and machines must run - safely, reliably, 27/7. Whether as original equipment or replacement parts, all of our customers always benefit from the fast, reliable delivery and close attention to our customer’s needs.

Manufacturer & Distributor

449 Attwell Dr Etobicoke ON M9W 5C4 Tel: 416-675-4233 Fax: 416-675-9416 Email: peterconn@fairviewfittings.com

Manufacturer & Distributor

GREAT LAKES COPPER INC.

FLUID POWER SALES, INC. 8257 Loop Rd Baldwinsville NY 13027 USA Tel: 315-638-7111 Fax: 315-638-7117 Email: info@fluidpowersales.com Web: www.fluidpowersales.com Branches: Dorchester, ON; Richmond Hill, ON Manufacturers: CPV Mfg; Dynex; Haldex; Hartmann Controls; Hydraforce Inc; Vonberg Valve; Wandfluh; Yuken

FAIRVIEW FITTINGS & MFG LTD.

15304 131th Ave Edmonton AB T5V 0A1 Tel: 780-483-1060 Fax: 780-487-7281 Email: dtrenn@girdel.com Web: www.girdel.com Manufacturers: Hydac; Parker - Commercial; Parker - Denison; Parker - Motion & Control; Parker - Pulsar; Parker - Volvo; Wandfluh; White

HAWE NORTH AMERICA Manufacturer 9009K Perimeter Woods Dr Charlotte NC 28216 USA Tel: 704-509-1599 Fax: 704-509-6302 Email: sales@hawehydraulics.com Web: www.haweusa.com Distributors: Hydra-Fab Fluid Power, Inc., Mississauga, ON; Redline Motion Control Inc., Pointe-Claire, QC; Wajax Industrial Components, Calgary, AB; Nisku, AB; Surrey, BC; Winnipeg, MB; Lachine, QC; Québec, QC

HAYDON KERK MOTION SOLUTIONS INC. Manufacturer 1500 Meriden Rd Waterbury CT 6705 USA Tel: 203-756-7441 Fax: 203-756-8724 Email: info.haydonkerk@ametek.com Web: www.haydonkerk.com

HELAC CORPORATION Manufacturer 225 Battersby Ave Enumclaw WA 98022 USA Tel: 360-825-1601 Fax: 360-825-1603 Email: actuators@helac.com Web: www.helac.com

March/April | 2013

13-04-08 2:45 PM

66 SupplierListings JOHN CRANE CANADA Manufacturer & Distributor

HERCULES SEALING PRODUCTS CANADA Distributor

HY-PRO FILTRATION

30 Saunders Rd Barrie ON L4N 9A8 Email: barrie@herculesca.ca Web: www.herculesca.ca Branches: Dorval, QC Manufacturers: Dichtomatik; The Simrit Group; SKF Polyseal; Trelleborg Sealing Solutions

12955 Ford Dr Fishers IN 46038 USA Tel: 317-849-3535 Fax: 317-849-9201 Email: info@hyprofiltration.com Web: www.hyprofiltration.com

HI-TECH CONTROLS Manufacturer & Distributor 14853 E Hinsdale Ave Centennial CO 80112 4280-4280 USA Tel: 303-680-5159 Fax: 303-680-5344 Email: info@hitechcontrols.com Web: www.hitechcontrols.com Manufacturers: Camozzi; Couplings; John Guest; Pneumadyne; Polyconn; Zeus

HI-TECH SEALS INC. Manufacturer & Distributor 9211 41st Ave Edmonton AB T6E 6R5 Tel: 780-438-6055 Fax: 780-434-5866 Email: info@hitechseals.com Web: www.hitechseals.com Branches: Edmonton, AB; Calgary, AB; Winnipeg, MB; Newmarket, ON; Boucherville, QC Manufacturers: Paulstra; Quadrant Plastics

HIGGINSON EQUIPMENT INC. Manufacturer & Distributor 1175 Corporate Dr Burlington ON L7L 5V5 Tel: 905-335-2211 Fax: 905-335-8756 Email: info@higginson.ca Web: www.higginson.com Manufacturers: AAA Valves; Air-Mite; Aldon Railway Equipment; Amtech Hydraclamp; Burkert Fluid Controls; BVA Hydraulics; Deublin Unions; Dynex Hydraulics; Ernst John C Inc.; Fabco; Gits Mfg Co.; GO; Gusher Pumps Inc.; Humphrey Automation; Linemaster; Magnatrol; Magnetrol Inc.; Oberdorfer Pumps; Ohio Oscillator; Oil-Rite Corporation; SMC-Full Line; Tobal Accumulators; Tol-O-Matic; Trico Corp.; Tuthill Pump Div.; Winters Gauges

HMI WEARING & BEARING PRODUCTS Manufacturer 36 Willow Point Rd Brighton ON K0K 1H0 Tel: 613-475-1130 Fax: 613-475-8930 Email: hmibearings@sympatico.ca

HUMPHREY AUTOMATION INC. Distributor 10-570 Alden Rd Markham ON L3R 8N5 Tel: 905-479-3633 Fax: 905-479-3755 Email: humphrey@pneumation.ca Web: www.humphreyautomation.ca

HURRICANE PUMP DISTRIBUTION Manufacturer 156 Romina Dr Vaughan ON L4K 4Z7 Tel: 905-760-8177 Fax: 905-760-9228 Email: cvanniekerk@hurricanepump.ca

March/April | 2013

62-72.1-FP-DES.indd 66

Manufacturer

HYDAC CORPORATION Manufacturer 14 Federal Rd Welland ON L3B 3P2 Tel: 905-714-9322 Fax: 905-714-4664 Email: sales@hydac.ca Web: www.hydac.ca Branches: Edmonton, AB; Montréal, QC;

HYDRAFLOW-PUMPTECH FLUID POWER INC. Distributor 2-421 Rowntree Dairy Rd Vaughan ON L4L 8H1 Tel: 905-856-9994 Fax: 905-856-9924 Email: sales@hydraflowpumptech.com Web: www.hydraflowpumptech.com Manufacturers: Argo-Hytos; Bosch Rexroth; Braden; Dropsa; Goodyear; Hydac; Hydraforce Inc; Kawasaki; Mico; Moog Flo-Tork; Permco; SAI; Sheffer; SPX Stone; Staffa; Stauff; White Hydraulics

423 Green Rd Stoney Creek ON L8E 3A1 Tel: 905-662-6191 Fax: 905-662-1564 Email: canada@johncrane.com Web: www.johncrane.com Branches: Edmonton, AB; Dartmouth, NS; Sarnia, ON; St Laurent, QC Distributors: EDA Environmental, Winnipeg, MB

JOHN SHERMAN AGENCIES LTD. Distributor 1641 Venables St Vancouver BC V5L 2H1 Tel: 604-254-9622 Fax: 604-254-3123 Email: tony@johnsherman.com Web: www.johnsherman.com

KAMAN INDUSTRIAL TECHNOLOGIES LTD. Distributor Annacis Business Park 746 Chester Rd New Westminster BC V3M 6J1 Tel: 604-523-2350 Fax: 604-526-4773 Email: BUNP01-KIT@kaman.com Web: www.kamandirect.com Branches: Cranbrook, BC; Prince George, BC; Sparwood, BC; Surrey, BC; Terrace, BC; Mississauga, ON Manufacturers: NSK Canada Inc.; Renold Canada Ltd.; Rexnord Canada LP; Ringball Corporation; Schaeffler Canada Inc.; SKF Canada Limited; Timken Canada LP; Veyance Canada Inc.

HYPOWER SYSTEMS Distributor 8616 18th St Edmonton AB T6P 1K5 Tel: 780-464-5528 Fax: 780-449-5080 Web: www.hypower.com Branches: Calgary, AB; Edmonton, AB; Fort McMurray, AB; Grande Prairie, AB; Prince George, BC; Vancouver/Delta, BC; Winnipeg, MB; Prince Albert, SK; Regina, SK; Saskatoon, SK Manufacturers: Bimba Manufacturing; Eaton; Enerpac; Graco; Kawasaki; Norgren; Numatics; Pall; Poclain Hydraulics

KSB PUMPS INC. Manufacturer 5205 Tomken Rd Mississauga ON L4W 3N8 Tel: 905-568-9200 Fax: 905-568-3740 Web: www.ksb.ca Branches: Calgary, AB; Dorval, QC

HYSECO FLUID SYSTEMS LTD Manufacturer & Distributor 1-7399 River Rd Delta BC V4G 1B2 Tel: 604-940-8865 Fax: 604-940-8802 Email: sales@hyseco.com Web: www.hyseco.com Manufacturers: Anchor; Curtiss Wright; Daman; Enerpac; KYB; Magnaloy; Marzocchi; Parker

INOX-TECH CANADA INC. Manufacturer 6705 Rte 132 Sainte-Catherine QC J5C 1B6 Tel: 450-638-5441 Fax: 450-638-2865 Email: info@inox-tech.com Web: www.inox-tech.com

INSERTA PRODUCTS INC. Manufacturer 538 Township Line Rd Blue Bell PA 19422 USA Tel: 215-643-0192 Fax: 215-643-4017 Web: www.inserta.com Distributors: Berendsen Fluid Power, Scarborough, ON; HyPower, Saskatoon, SK; Kinecor Inc., Lachine, QC; Wainbee Ltd., Mississauga, ON

INTEMPCO CONTROLS LTD. Manufacturer & Distributor 880 av Selkirk Pointe-Claire QC H9R 3S3 Tel: 514-426-0488 Fax: 514-426-0522 Email: info@intempco.com Web: www.intempco.com Manufacturers: Exigo Manufacturing

KURITEC CORPORATION Manufacturer & Distributor 140 Roy Blvd Brantford ON N3R 7W9 Tel: 519-753-6717 Fax: 519-753-7737 Email: sales@kuritec.com Web: www.kuritec.com Manufacturers: Hose Technology; Kuriyama; Piranha; Tigerflex

KYB AMERICAS CORPORATION Manufacturer 140 N. Mitchell Ct. Addison IL 60101 USA Tel: 630-620-5555 Fax: 630-620-8133 Email: hyd@kyb.com Web: www.kybfluidpower.com

LA SOCIÉTÉ WAIRCOM INC. Manufacturer 209 York Granby QC J2G 2B9 Tel: 450-378-4441 Fax: 450-378-0332 Email: mdube@waircom.com Web: www.waircominc.ca

LEN’S EQUIPMENT COMPANY LTD. Distributor 3-40 Skagway Ave Scarborough ON M1M 3V1 Tel: 416-261-6121 Fax: 416-261-8065 Email: sales@lensequipment.com Web: www.lensequipment.com Manufacturers: Airsep; Atlas Copco; D.V. Systems; Deltech; Legris Transair

www.design-engineering.com

13-04-08 2:45 PM

SupplierListings 67 LEXAIR INC.

MAXON PRECISION MOTORS, INC.

NETZSCH CANADA, INC.

Manufacturer

Manufacturer

Manufacturer

2025 Mercer Rd Lexington KY 40511 USA Tel: 859-255-5001 Fax: 859-255-6656 Email: valvesales@lexairinc.com Web: www.lexairinc.com Distributors: CAN-ACT Cylinders & Controls, Delta, BC; Integrated Pneumatics Ltd., St. John, NB; Pneumatic Industrial Equip., Mississauga, ON; Pneutech Industrial Equipment, Kitimat, BC; Pneutech Rousseau Inc., Lachine, QC; Montréal, QC; Sempress Canada Inc., Mississauga, ON; Universal Air Hydraulic Ltd., Nisku, AB

101 Waldron Rd Fall River MA 2720 USA Tel: 508-677-0520 Fax: 508-677-0530 Email: info@maxonmotorusa.com Web: www.maxonmotorusa.com Distributors: Electromate, Woodbridge, ON

10-740 Huronia Rd Barrie ON L4N 6C6 Tel: 705-327-6550 Fax: 705-797-8427 Email: diane.balcerczyk@netzsch.com

LIFCO HYDRAULICS LTD. Manufacturer 1-8201 Esquesing Line Milton ON L9T 6E7 Email: ed@lifcohydraulics.com

LYNCH FLUID CONTROLS Manufacturer & Distributor 1799 Argentia Rd Mississauga ON L5N 3A2 Tel: 905-363-2400 Fax: 905-363-1191 Email: marketing@lynch.ca Web: www.lynch.ca Manufacturers: Atos; Kawasaki Precision Machinery; Sun Hydraulics Distributors: Visit our Website

MICO, INCORPORATED Manufacturer 1911 Lee Blvd North Mankato MN 56003 USA Tel: 507-625-6426 Fax: 507-625-3212 Email: micomail@mico.com Web: www.mico.com Distributors: Berendsen Fluid Power, Scarborough, ON; Edmonton Brake & Clutch, Edmonton, AB; The Fluid Power House (Sudbury) Inc, Lively, ON; Fort Gary Industries, Winnipeg, MB; Winnipeg, MB; Hypower Systems Ltd., Delta, BC; Kinecor Inc., Nisku, AB; Superior Industrial Frictions Ltd., Edmonton, AB; TECTRAN Co., Mississauga, ON; Traction Division of UAP, Montréal, QC

MOOG FLO-TORK Manufacturer 1701 Main St N Orrville OH 44667 USA Tel: 330-682-0010 Fax: 330-683-6857 Email: sales@ft.moog.com Web: www.flo-tork.moog.com

MADISON COMPANY

MOTION CANADA

Manufacturer

Distributor

27 Business Pk Dr Branford CT 06405 USA Tel: 203-488-4477 Fax: 203-481-5036 Email: info@madisonco.com Web: www.madisonco.com Distributors: Bestobell-Aqua Tronix, Toronto, ON; Saint-Laurent, QC; Brahmatech Ltd., Red Deer, AB; Red Deer, AB; Process Automation, Inc., Hamilton, ON; Southwell Controls, Ltd., North Vancouver, BC

1450 Meyerside Dr Suite 305 Mississauga ON L5T 2N5 Tel: 800-526-9328 Fax: 905-696-9308 Web: www.motionindustries.com Manufacturers: Bosch Rexroth; Char-Lynn; Eaton; SMC; VickersWarnick Ltd.

MP FILTRI (CANADA) INC. Manufacturer & Distributor 380 Four Valley Dr Concord ON L4K 5Z1 Tel: 905-303-1369 Fax: 905-303-7256 Email: mail@mpfiltricanada.com Web: www.mpfiltricanada.com

MAIN MANUFACTURING PRODUCTS INC. Manufacturer & Distributor 3181 Tri-Park Dr Grand Blanc MI 48439 USA Tel: 800-521-7918 Fax: 810-953-1385 Email: info@mainmfg.com Web: www.mainmfg.com

MARITIME COMPRESSOR LTD. Distributor 164 ch Alexandrina Notre-Dame NB E4V 1S6 Tel: 506-576-6638 Fax: 506-576-9706 Web: www.maritimecompressorltd.com Distributors: Champion Compressors, Mississauga, ON; CompAir Canada, Oakville, ON

MARMON/KEYSTONE CANADA INC. Distributor 1220 Heritage Rd Burlington ON L7L 4X9 Tel: 905-319-4646 Fax: 905-319-4248 Email: info@mkcdn.com Web: www.mkcanada.com Branches: Leduc, AB; Langley, BC; Winnipeg, MB; Halifax, NB; Burlington, ON; Boucherville, QC; Saskatoon, SK

MAX MACHINERY INC. Manufacturer 33A Healdsburg Ave Healdsburg CA 95448 USA Tel: 707-433-2662 Fax: 707-433-1818 Email: info@maxmachinery.com Web: www.maxmachinery.com Distributors: Cancoppas Ltd., Mississauga, ON; Flotech Controls, Regina, SK

www.design-engineering.com

62-72.1-FP-DES.indd 67

MULLEN FLUID POWER LTD. Manufacturer & Distributor 12-49 Morrow Rd Barrie ON L4N 3V7 Tel: 705-722-7622 Fax: 705-722-3415 Email: gailatmfp@aol.com

N.R. MURPHY LIMITED Manufacturer 430 Franklin Blvd Cambridge ON N1R 8G6 Tel: 519-621-6210 Fax: 519-621-2841 Email: 4nodust@nrmurphy.com Web: www.nrmurphy.com

NASH, A GARDNER DENVER PRODUCT Manufacturer & Distributor

NEWAGE INDUSTRIES INC. Manufacturer 145 James Way Southampton PA 18966 USA Tel: 215-526-2300 Fax: 215-526-2190 Email: info@newageindustries.com Web: www.newageindustries.com

NIPPON ACCUMULATOR CO. LTD. Manufacturer 415 Nishikubo Shimizu, Shizuoka 424-0038 Japan Email: sales@nacol.co.jp Web: www.nacol.co.jp Distributors: Grand River Sales Ltd, Guelph, ON

NORCAN FLUID POWER Distributor 603 15th Ave Nisku AB T9E 7M6 Tel: 780-955-7450 Fax: 780-955-7451 Web: www.norcanfluidpower.com Branches: Calgary, AB; Red Deer, AB; Kamloops, BC; Langley, BC; Prince George, BC; Saskatoon, SK Manufacturers: ASA Hydraulik; Atos; Ausco; Brevini; MP Filtri; Olaer; Parker Denison; Prince; Sauer Danfoss

NORGAS CONTROLS INC. Distributor 175 av Avro Pointe-Claire QC H9R 6A9 Tel: 514-697-8439 Fax: 514-697-4249 Email: info@norgascontrols.com Web: www.norgascontrols.com Manufacturers: Belgas; Bryan Donkin; Hattersley; Itron; Maxitrol; Milliken; Rub

NURASEAL CO. LTD. Manufacturer & Distributor 37-7370 Bramalea Rd Mississauga ON L5S 1N6 Tel: 905-795-8380 Fax: 905-795-8381 Email: sales@nuraseal.com Web: www.nuraseal.com Manufacturers: Filton (UK) Limited

OETIKER INC. Manufacturer 6317 Euclid St Marlette MI 48453 USA Tel: 989-635-3621 Fax: 989-635-2157 Email: info@us.oetiker.com Web: www.oetiker.com Branches: Alliston, ON

OIL-RITE CORPORATION Manufacturer

200 Simko Blvd Charleroi PA 15022 USA Tel: 724-239-1500 Fax: 724-239-1502 Email: nash@gardnerdenver.com Web: www.gdnash.com Distributors: Austin & Denholm, Calgary, AB; Delta, BC; S A McLernon Inc, Montreal, ON

4325 Clipper Dr Manitowoc WI 54221 1207-1207 USA Tel: 920-682-6173 Fax: 920-682-7699 Email: sales@oilrite.com Web: www.oilrite.com Distributors: Higginson Equipment Sales, Burlington, ON; Howard Marten Company Ltd., Pickering, ON; Hypower Systems, Calgary, AB; Motion Industries Canada, Edmonton, AB

NCA LTD.

THE OILGEAR COMPANY

Distributor

Manufacturer

376 Sovereign Rd London ON N6M 1A5 Tel: 519-659-2691 Fax: 519-659-3590 Email: dtaylor@ncaltd.ca Web: ncaltd.ca

2300 51st St S Milwaukee WI 53219 USA Tel: 414-327-1700 Fax: 414-327-0532 Web: www.oilgear.com Branches: Ajax, ON Distributors: Beta Fluid Power, Sault Ste. Marie, ON; Control Flow Hydraulics, Edmonton, AB; Hydraflow - Pumptec Fluid Power, Concord, ON; Indumo Hydraulics, St. Laurent, QC; Peerless Engineering, Burnaby, BC; Prince George, BC; Prince Albert, SK

NETT TECHNOLOGIES INC. Manufacturer 2-6707 Goreway Dr Mississauga ON L4V 1P7 Tel: 905-672-5453 Fax: 905-672-5949 Email: sales@nett.ca Web: www.nett.ca Distributors: Industrial Exhaust Components, Edmonton, AB; Silencieux Federal Mufflers, Montréal, QC

March/April | 2013

13-04-08 2:45 PM

68

SupplierListings

OMEGA

Manufacturer

PNEU-HYD INDUSTRIES LTD.

ROSTA INC.

Manufacturer & Distributor

Manufacturer & Distributor

1-375 Green Rd Stoney Creek ON L8E 4A5 Tel: 905-664-5540 Fax: 905-664-4334 Web: www.pneuhyd.com

6-12 Douglas Rd Uxbridge ON L9P 1S9 Tel: 905-852-1929 Fax: 905-852-1861 Email: info@rostainc.com Web: www.rostainc.com Manufacturers: Rosta; Venanzetti Vibrazioni; Vibrachoc/Paulstra

POCLAIN HYDRAULICS

976 rue Bergar Laval QC H7L 5A1 Tel: 514-856-6928 Fax: 514-856-6886 Email: info@omega.ca Web: www.omega.ca

Manufacturer

PARKER HANNIFIN CANADA

PQ SYSTEMS LTD.

RPM MECHANICAL INC.

Manufacturer

Distributor

Manufacturer & Distributor

160 Chisholm Dr Milton ON L9T 3G9 Tel: 905-693-3000 Fax: 905-876-0788 Email: pcdmktg@parker.com Web: www.parker.com Branches: Calgary, AB; Dorval, QC

A2-5279 Stillcreek Ave Burnaby BC V5C 5V1 Tel: 604-299-0022 Fax: 604-299-8453 Email: info@pqsystemsltd.com Web: www.pqsystemsltd.com Manufacturers: Delta Computer Systems; Duplomatic; Exlar; Hydraforce; MOOG; MTS-Temposonics; PQS Servolife; Ross Controls

2290 Industrial St Burlington ON L7P 1A1 Tel: 905-335-5523 Fax: 905-335-5843 Email: sales@rpmmech.com Web: www.rpmmechanical.com

PARKER HANNIFIN QCD/SNAP-TITE OPERATION

1300 Grandview PKY PO Box 801 Sturtevant WI 53177 USA Tel: 262-321-0676 Fax: 262-321-0703 Email: info-america@poclain-hydraulics.com Web: www.poclain-hydraulics.com Distributors: Hypower Systems Inc, Calgary, AB; Edmonton, AB; Grande Prairie, AB; Campbell River, BC; Delta, BC; Kamloops, BC; Prince George, BC; Regina, SK; Saskatoon, SK ; PneutechRousseau Controls, Etobicoke, ON; Beauport, QC; Lachine, QC; Sunsource, Mississauga, ON

ROTATOR PRODUCTS LTD. Distributor 8-101 Innovation Dr Woodbridge ON L4H 0S3 Tel: 905-856-2653 Fax: 905-856-3407 Email: sales@rotatorproducts.com Web: www.rotatorproducts.com Branches: Pierrefonds, QC Manufacturers: Conductix Wampfler; Eaton; Hycomp; Johnson Power; Magnetek; Oil Skimmers; Poona Couplings; R&M Material HDLG; Reuland; Rexnord Falk; Ringfeder

RUBBERLINE PRODUCTS LTD. Distributor 81 Bleams Rd Kitchener ON N2C 2G2 Tel: 519-894-0400 Fax: 519-894-3602 Email: sales@rubberline.ca Web: www.rubberline.com Branches: Brantford, ON; Cambridge, ON; Guelph, ON; Mississauga, ON Manufacturers: Allied Witan; American Biltrite; Asco Numatics; Burkert; BVA Hydraulics; Colder; Deltrol; Dixon; Gates; Habasit; Hansen Coupling; Humphrey Automation; Kuritec; Maytec; Norgren; Pneumadyne; Reelcraft; Sheffer; Vicas; Winters

Manufacturer

PRO-JECT INDUSTRIES LTD.

201 Titusville Rd Union City PA 16438 USA Tel: 814-438-3821 Fax: 814-438-3069 Email: qdv_sales@snap-tite.com Web: www.snap-titequickdisconnects.com Distributors: Fides Marketing, Beaconsfield, QC

Manufacturer 5901 48th Ave Olds AB T4H 1V1 Tel: 403-556-7100 Fax: 403-556-1666 Email: info@westwardparts.com Web: www.westwardparts.com

PATEL HOSE INC.

PROCESS PRODUCTS LIMITED

Manufacturer

Distributor

43-173 Advance Blvd Brampton ON L6T 4Z7 Tel: 905-791-4161 Fax: 905-791-3599 Email: sales@patelhose.com Web: www.patelhose.com

3-920 Caledonia Rd Toronto ON M6B 3Y1 Tel: 416-781-3399 Fax: 416-789-9648 Email: sales@process-products.com Web: www.process-products.com

PELMAR ENGINEERING LTD.

PSI FLUID POWER LTD.

RYCO HYDRAULICS

Manufacturer

Manufacturer & Distributor

Manufacturer

8-445 Midwest Rd Scarborough ON M1P 4Y9 Tel: 416-288-1736 Fax: 416-288-0385 Email: support@pelmareng.com

13771 Mayfield Pl Richmond BC V6V 2G9 Tel: 604-278-4481 Fax: 604-278-7693 Email: sales@psifluidpower.ca Web: www.psifluidpower.ca Branches: Calgary, AB; Edmonton, AB; Red Deer, AB Manufacturers: AKG; Amca; Braden; Eaton; Oil Air; Parker; Vickers

1616 Greens Rd Houston TX 77032 USA Tel: 281-821-4100 Fax: 281-821-4300 Email: mstewart@ryco.us Web: www.ryco.com.au Branches: Aurora, ON

PENTAIR CANADA INC. Manufacturer & Distributor 269 Trillium Dr Kitchener ON N2G 4W5 Tel: 519-748-5470 Fax: 519-748-2553 Web: www.pentair.com

PESCO SALES LTD. Distributor 3260 rue Sartelon Saint-Laurent QC H4R 1E3 Tel: 514-331-6953 Fax: 514-331-0061 Manufacturers: Aquflow; Badger; Cantesco; Garlock; Generant; LMI Milton Roy; Saint-Gobain; Sterling Motors; Tarby; ThermOmega-Tech; Zook

PINNACLE SYSTEMS, INC. Manufacturer PO Box 100088 Pittsburgh PA 15233 USA Tel: 412-262-3950 Fax: 412-262-4055 Email: sales@pinnaclesystems.com Web: www.pinnaclesystems.com Distributors: Metal Form Products Co., Pickering, ON

PLAD EQUIPMENT LTD. Manufacturer & Distributor B7-461 North Service Rd W Oakville ON L6M 2V5 Tel: 905-847-6700 Fax: 905-847-0272 Web: www.plad.com Branches: Vancouver, BC; MontrĂŠal, QC; Quebec City, QC Manufacturers: Albany; Barnes; Corcoran; Deming; Grundfos; Iron Pump; National Pump Torishima; SPP; Thrush; VArisco; Weinman; Wilo

March/April | 2013

62-72.1-FP-DES.indd 68

RALSTON METAL PRODUCTS LTD. Manufacturer 50 Watson Rd S Guelph ON N1L 1E2 Tel: 519-836-2968 Fax: 519-836-9763 Email: service@ralstonmetal.com Web: www.ralstonmetal.com

RAM INDUSTRIES INC. Manufacturer 33 York Rd E Yorkton SK S3N 3Z4 Tel: 877-799-1005 Fax: 306-786-2651 Email: sales@ramindustries.com Web: www.ramindustries.com

SCOTT ROTARY SEALS Manufacturer 301 Franklin St. Olean NY 14760 USA Tel: 716-376-0708 Fax: 716-372-1777 Email: sales@scottrotaryseals.com Web: www.scottrotaryseals.com

RENUM HYDRAULICS LTD. Manufacturer & Distributor 200 Wilkinson Rd Units 11-12 Brampton ON L6T 4M4 Tel: 905-457-6754 Fax: 905-457-1656 Email: chris@renumhydraulics.com Web: www.renumhydraulics.com Manufacturers: EDI; Marzocchi; Misselli; Oilcontrol; Omal; OMFB; OT Pumps; Vivolo

SEAL MASTER CORPORATION Manufacturer 368 Martinel Dr Kent OH 44240 USA Tel: 330-673-8410 Fax: 330-673-8242 Web: www.sealmaster.com

www.design-engineering.com

13-04-08 2:45 PM

SupplierListings 69 SERVO-ROBOT INC.

THERMAL TRANSFER PRODUCTS

Manufacturer

Manufacturer

1370 rue Hocquart Saint-Bruno QC J3V 6E1 Tel: 450-653-7868 Fax: 450-653-7869 Email: info@servorobot.com Web: www.servorobot.com

5215 21st St Racine WI 53406 USA Email: ttpsales@thermasys.com Web: www.thermaltransfer.com Distributors: Drive Products Inc., Mississauga, ON

SETPOINT TECHNOLOGIES Distributor 10393 Sinclair Dr Ilderton ON N0M 2A0 Tel: 519-666-3363 Fax: 519-666-3365 Email: info@setpointtech.com Web: www.setpointtech.com Manufacturers: Ernst John C Inc.; Lake Monitors; Marwin; Oberdorfer; Oseco; Price Pump; Pulsafeeder; Quest-Tec; Sure Seal

SIMERICS INC. Manufacturer & Distributor 303 Williams Avenue, Suite 123 Hunstville AL 35801 USA Tel: 256-489-1480, Ext 258 Fax: 256-489-1460 Email: contact@simerics.com Web: www.simerics.com

SKEANS ENG & MACH LTD. Distributor 1900 Brigantine Dr Coquitlam BC V3K 7B5 Tel: 604-777-4247 Fax: 604-777-1900 Email: skeans@skeans.com Web: www.skeans.com Branches: Calgary, AB; Edmonton, AB; Prince George, BC; Winnipeg, MB Manufacturers: Bimba Mfg; Colder Couplings; Enidine Shock Absorbers; Galland Henning Nopak; Gardner Denver; Hansen/Eaton; Horner PLC’s; Legris Fittings; Leuze Sensors; Mac Valves; Mattei Compressors; Murr Elektronik; PHD Cylinders; Piab Vacuum Pumps; Tolomatic Cylinders; Transair Piping Systems; TRD Cylinders; Wilkerson FRL’s

SKF MACHINED SEALS & PLASTICS Manufacturer 5777 Coopers Ave Mississauga ON L4Z 1R9 Tel: 905-712-1600 Fax: 905-712-1606 Email: canada.sales@economos.com Web: www.skf.ca

SMC PNEUMATICS (CDA) LTD.

SPEZ-TECH ENGINEERED FLUID POWER TECHNOLOGY Distributor

THORDON BEARINGS INC.

2411 Burbank Dr Mississauga ON L5L 2T8 Tel: 905-828-5579 Fax: 905-828-8189 Email: spez-tech@rogers.com Web: www.speztech.com Manufacturers: Walther Prazision Quick Coupling Systems

3225 Mainway Burlington ON L7M 1A6 Tel: 905-335-1440 Fax: 905-335-4033 Email: info@thordonbearings.com Web: www.thordonbearings.com

STAUBLI CORP Manufacturer 201 Parkway West Duncan SC 29334 USA Tel: 864-433-1980 Fax: 864-486-5495 Email: connectors.usa@staubli.com Web: www.staubli.com Distributors: CAN-ACT Cylinders & Controls Inc, Delta, BC; Crothers, Robert Associates Ltd, Scarborough, ON

SNS AUTOMATION PRODUCTS Distributor 165 Saunders Rd Barrie ON L4N 9A3 Tel: 705-737-0524 Fax: 705-737-0649 Email: barrie@snsautomation.com Web: www.snsautomation.com Branches: Cambridge, ON; London, ON; Mississauga, ON; Montréal, QC

SPAENAUR INC. Distributor 815 Victoria St N Kitchener ON N2G 4B1 Tel: 519-744-3521 Fax: 519-744-0818 Email: service@spaenaur.com Web: www.spaenaur.com

TOPRING Manufacturer 895 boul Industriel Granby QC J2J 1A6 Tel: 450-375-1828 Fax: 450-375-1408 Email: solutions@topring.ca Web: www.topring.com

STAUFF CANADA LTD. Manufacturer & Distributor 866 Milner Ave Scarborough ON M1B 5N7 Tel: 416-282-4608 Fax: 416-282-3039 Email: sales@stauffcanada.com Web: www.stauffcanada.com

STRICTLY SALES & SERVICE INC. Manufacturer & Distributor 125 Trider Cres Dartmouth NS B3B 1V6 Tel: 902-468-5308 Fax: 902-468-2175 Email: sales@strictlyhydraulics.com Web: www.strictlyhydraulics.com

SUNSOURCE TECHNOLOGY SERVICES (CANADA) LIMITED Distributor 47-49-6535 Millcreek Dr Mississauga ON L5N 2M2 Tel: 905-821-4230 Fax: 905-821-4879 Web: www.sun-source.com

Manufacturer & Distributor 2715 Bristol Cir 2 Oakville ON L6H 6X5 Tel: 800-762-7621 Fax: 905-287-9710 Web: www.smcpneumatics.ca Branches: Vancouver, BC; Windsor, ON; Montreal, QC Manufacturers: Zaytran

Manufacturer

TORO HYDRAULIC & MACHINERY INC. Manufacturer & Distributor 15-1415 Bonhill Rd Mississauga ON L5T 1R2 Tel: 905-565-8887 Fax: 905-565-5788 Email: sales@torohyd.com Web: www.torohyd.com Manufacturers: Yuken (Japan)

TUFFEE INC. Distributor C-52 McIntyre Pl Kitchener ON N2R 1H9 Tel: 519-896-2555 Fax: 519-896-2988 Manufacturers: Micro Automation; Mindman; Topring

UNIFIED ALLOYS Distributor 8835 50 Ave NW Edmonton AB T6E 5H4 Tel: 780-468-5656 Fax: 780-469-3651 Email: d.hansen@unifiedalloys.com

VAL-MATIC VALVE & MFG. CORP. Manufacturer

SWAGELOK COMPANY Manufacturer 31500 Aurora Rd Solon OH 44139 USA Tel: 440-349-5934 Fax: 440-349-5843 Email: publicrelations@swagelok.com Web: www.swagelok.com Distributors: Atlantic Valve & Fitting Co. ; Avon Fluid System Technologies ; Brooks Valve & Fitting ; Calgary Valve & Fitting ; Columbia Valve & Fitting ; Drayton Valve & Fitting ; Edmonton Valve & Fitting ; Fort McMurray Valve & Fitting ; Medicine Hat Valve & Fitting ; Prince George Valve & Fitting ; Red Deer Valve & Fitting ; Southern Alberta FST ; Swagelok Central Canada ; Swagelok Central Ontario ; Swagelok Quebec Group ; Swagelok Southewestern Ontario ; Swagelok Southwestern Ontario

SWITCHING SOLUTIONS INC. Manufacturer 380 Four Valley Dr Concord ON L4K 5Z1 Tel: 905-303-8700 Fax: 905-303-7130 Email: sales@switchingssi.com Web: www.switchingssi.com Distributors: MP Filtri Canada, Concord, ON

TAYLOR DEVICES INC. Manufacturer

905 Riverside Dr Elmhurst IL 60126 USA Tel: 630-941-7600 Fax: 630-941-8042 Email: valves@valmatic.com Web: www.valmatic.com

VICONE HIGH PERFORMANCE RUBBER Manufacturer 12-216 Poirier Saint-Eustache QC J7R 6B1 Tel: 450-974-1152 Fax: 450-974-0552 Email: info@viconerubber.com Web: www.viconerubber.com

VIKING PUMP OF CANADA INC. Manufacturer & Distributor 661 Grove Ave Windsor ON N9A 6M3 Tel: 519-256-5438 Fax: 519-256-5070 Email: cinfo@idexcorp.com Web: www.vikingpumpcanada.com Branches: Edmonton, AB; Vancouver, BC; Toronto, ON; Montreal, QC Manufacturers: Corken; Griswold; Grundfos; Liquid Controls; Micropump; Monoflo; Pulsafeeder; Richter; Rotech; Top Line; Travaini; Viking Pump; Warren Rupp; Wright Flow Technologies Distributors: Industrial Pump Systems, Sudbury, ON; IRC Equipment Inc., Mount Pearl, NL; Kemtag Enterprises Ltd., Moncton, NB

90 Taylor Dr North Tonawanda NY 14120 0748-0748 USA Tel: 716-694-0800 Fax: 716-695-6015 Email: taylordevi@aol.com Web: www.taylordevices.com Distributors: Teratec Inc., Oakville, ON

www.design-engineering.com

62-72.1-FP-DES.indd 69

March/April | 2013

13-04-08 2:45 PM

70 SupplierListings WAINBEE LIMITED

WILLIAMS FLUIDAIR CORPORATION LIMITED

Manufacturer & Distributor

Manufacturer & Distributor

5789 Coopers Ave Mississauga ON L4Z 3S6 Tel: 905-568-1700 Fax: 905-568-0083 Email: marketing@wainbee.com Web: www.wainbee.com Branches: Calgary, AB; Edmonton, AB; Prince George, BC; Vancouver, BC; Winnipeg, MB; Halifax, NS; Kitchener, ON; Chicoutimi, QC; Montreal, QC; Québec, QC; Saskatoon, SK Manufacturers: AC Tech; Ametek; Bucher; BuTech; Cervis; Chicago Pneumatic; Clippard; Colder; Cooper Power Tools; De-StaCo; Desoutter; Durant; Fluidsentry; Gast Manufacturing; Haskel; Hy-Pneu-Mat; Hydreco; Ingersoll Rand; Jun-Air; Parker Hannifin; Proportion Air; Titan; Vacuforce

1018 Salk Rd Pickering ON L1W 3C5 Tel: 905-831-3222 Fax: 905-831-3284 Email: service@williamsfluidair.com Web: www.williamsfluidair.com Manufacturers: Benteler Steel & Tube; Custom Actuator; Enerpac / Powerteam; Gates Hydraulics; Pitanco Gauges; RSB Tube Clamps; SSP Adapters; Voss GMBH

WINNIPEG FLUID SYSTEM TECHNOLOGIES LTD. Manufacturer & Distributor 118 Commerce Dr Winnipeg MB R3P 0Z6 Tel: 204-633-4446 Fax: 204-633-4484 Email: Claudette.leblanc@swagelok.com Web: www.swagelok.com

WINTERS INSTRUMENTS

Manufacturer & Distributor 1290 E Waterford Ave Milwaukee WI 53235 USA Tel: 414-769-6400 Fax: 414-769-6591 Email: sales@webster-inst.com Web: www.webster-inst.com Company Profile:Webster Instruments is a division of Webtec Products Limited, a ISO9001:2000 company manufacturing & designing fluid power products for use in mobile and industrial machinery. Webster Instruments has grown to meet the needs of both mobile and industrial OEM customers. Products include hydraulic test equipment & flow meters, pressure & temperature sensors, data acquisition systems, directional control & flow control valves and specialty items.

Manufacturer 500 Southard St Trenton NJ 08638 USA Tel: 609-394-0150 Fax: 609-989-4847 Email: sales@xpando.com Web: www.xpando.com Distributors: Cimco, Toronto, ON; Crane Supply, Ottawa, ON; Drennan Refrigeration, London, ON; Fix-Air, Laval, QC; J.L. Wilson & Sons, Toronto, ON; Refri-Ozone, Granby, QC; Refrigeration Components, Brantford, ON; Refrigeration Supply, Burnaby, BC; Western Plumbing & Heating, Dartmouth, NS

XOMOX CANADA LTD.

Manufacturer

WEBSTER INSTRUMENTS

X-PANDO PRODUCTS CO.

121 Railside Rd Toronto ON M3A 1B2 Tel: 416-444-2345 Fax: 416-444-8979 Email: sales@winters.com Web: www.winters.com Branches: Calgary, AB

WITTENSTEIN Manufacturer 1249 Humbracht Cir Bartlett IL 60103 USA Tel: 630-540-5300 Fax: 630-736-6100 Email: info@wittenstein-us.com Web: www.wittenstein-us.com Branches: Waterdown, ON

Manufacturer 1120 Crois Claire Lachine QC H8S 1A1 Tel: 514-637-1007 Fax: 514-637-5435 Email: dino.pedicelli@xomox.com

ZINGA INDUSTRIES Manufacturer 2400 Zinga Dr Reedsburg WI 53959 USA Tel: 608-524-4200 Fax: 608-524-4220 Email: zinga@zinga.com Web: www.zinga.com

DID WE MISS YOU? To be included in next year’s directory issue please contact the Content Manager. Email: mlamkey@bizinfogroup.ca

Advertisers Index Website

Aurora Bearing Company

www.aurorabearing.com

Automation Direct

www.automationdirect.com

Baldor Electric Company

www.baldor.com

Berendsen Fluid Power Ltd.

www.bfpna.com

Brand Hydraulics Co. BRECOflex Co. L.L.C.

Advertiser

Website

Main Manufacturing Products

www.mainmfg.com

54

Master Bond Inc.

www.masterbond.com

46

72

MOCAP

www.mocap.com

31

47

MP FILTRI (Canada) Inc.

www.mpfiltricanada.com

26

www.brand-hyd.com

41

Novotechnik US Inc.

www.novotechnik.com

27

www.brecoflex.com

29

Omega Engineering Inc.

www.omega.ca

3

Canadian Fluid Power Association

www.cfpa.ca

48

Parker Hannifin Corp.

www.parker.com

33

Clippard Instrument Laboratory

www.clippard.com

Proto Labs Inc.

www.protolabs.com

19

Creaform Inc.

www.creaform3d.com

18

Quality Transmission Components

www.qtcgears.com

31

Cross Manufacturing Inc.

www.crossmfg.com

60

Renum Hydraulics Ltd.

www.renumhydraulics.com

Daemar Inc.

www.daemar.com

21

Rittal Systems Ltd

www.rittal.ca

Design Engineering EXPO

www.dex2013.com

23

Rosta Inc.

www.rostainc.com

Design Fusion

www.designfusion.ca

RotoPrecision Inc.

www.rotoprecision.ca

11

Diequa Corporation

www.diequa.com

Rotor Clip Company, Inc.

www.rotorclip.com

12

Drive Products Inc.

www.driveproducts.com

43

Ryco Hydraulics

www.ryco.com.au

52

Eaton Corporation

www.eaton.com/hydraulics

39

Schaeffler Canada Inc.

www.ina.com

Encoder Products

www.encoder.com

28

Scott's Directories

www.scottsinfo.com

62

Exair Corp.

www.exair.com

15

Seal Master Corp.

www.sealmaster.com

56

Festo Canada Inc.

www.festo.ca

35

Stratasys

www.stratasys.com

13

Gates Corporation

www.gates.com

37

Switching Solutions Inc.

www.switchingssi.com

25

Harting Canada Inc.

www.harting.ca

Tecom Inc.

www.crbearing.com

46

HAWE North America, Inc.

www.haweusa.com

Toro Hydraulics & Machinery

www.torohyd.com

56

Henkel Canada Corp.

www.loctite.com

UBM Canon

www.DM-Canadashow.com

71

Hercules Sealing Products Canada

www.herculescn.com

58

Wainbee Limited

www.wainbee.com

58

Hy-Pro Filtration

www.hyprofiltration.com

50

March/April | 2013

62-72.1-FP-DES.indd 70

Page 28 7

9

53,55,57 10

8 61 2

Page

45 16,17 24

4

www.design-engineering.com

13-04-08 2:45 PM

24784_CN_DM13

Advertiser

CONNECTIONS

like these cannot be made at your desk!

May 14-16, 2013

Toronto Congress Centre Toronto, ON

Industry Peers

New Technologies

Thought Leaders

Ideas and Inspiration

Leave your office behind and expand your skill set at Design & Manufacturing Canada.

• Increase your knowledge and your network by engaging with like-minded peers and industry thought leaders.

• Test drive the technologies of tomorrow.

• Collaborate with world-class suppliers to create custom solutions that can’t be found online.

• Engineer fresh ideas through face-to-face discussions.

24784_CN_DM13

Register today at:

62-72.1-FP-DES.indd 71

Produced and managed

by UBM Canon ubmcanonevents.com

DM-CanadaShow.com Promo code: AB

13-04-08 2:45 PM

For decades, ABB variable speed drives and Baldor motors have set the standard for quality, reliability and energy savings. Now, industrial customers can buy these products and receive expert support from a single source. Call 479-646-4711 to locate the district office nearest you.

Two trusted names. One local source for sales and support. Only from ABB and Baldor. baldor.com

• Local Sales & Support • Energy Efficiency • Industrial Motors & Drives • Unmatched Customer Service

©2013 Baldor Electric Company

62-72.1-FP-DES.indd 72

13-04-08 2:45 PM