Gilmore Pressure Regulator, Manual Spring
Resilient shear seals maintain failsafe hydraulic pressure for a wide variety of topside and subsea applications. This Gilmore GEN2 Pressure Regulator with Tungsten Carbide seal trim has been designed with the same footprint as the legacy Gilmore Manual Spring Regulators. The improved carrier guidance lowers the dead band of the legacy equivalent for optimal performance. Significant engineering enhancements: • Refined Tungsten Carbide seal trim design • Guided hydraulic damping technology • Enhanced bolted plunger guide • Upgraded dynamic plunger T-Seal
INFO@gilmore.com www.gilmore.com GEN2 PRESSURE REGULATOR,MS -121020-001-01
Gilmore Pressure Regulator, Manual Spring
GEN2 Pressure Regulator, Manual Spring
All stainless components
Stainless steel dual spring
Guided wear band
Auxilliary port Tungsten Carbide Shear Seals
Benefits Qualified above API 16D requirements and IADC Control Valve Qualification Testing Recommendation 10,000 cycles at full flow rates, tested at varying regulated set pressure ranges Resilient Tungsten Carbide seal technology Guided hydraulic damping technology Improved deadband performance Enhanced bolted plunger guide Corrosion resistant alloy material construction throughout Threaded seal carrier alignment SAE gauge and auxiliary ports Full performance data available Drop-in replacement for legacy Gilmore Spring Regulators • 1” or 1-1/2” Outlet • Single and Dual Inlets • Multiple ranges from 500 psi to 5,000 psi regulated pressure
DRILLING | PRODUCTION | INDUSTRIAL INFO@gilmore.com INFO@Gilmore.com www.gilmore.com GEN2 PRESSURE REGULATOR,MS -121020-001-01
*Patented