Gilmore GEN2 Pressure Regulator-Hydraulic Pilot Product Sheet

Gilmore

Pressure Regulator, Hydraulic Pilot

Reliably maintaining hydraulic pressure for a wide variety of topside and subsea applications.

Gilmore’s GEN2 Pressure Regulator with Tungsten Carbide seal trim has been designed with the same footprint as the legacy Gilmore Hydraulic Pilot Regulators. Tungsten Carbide hydro-seals are precision lapped to provide a durable positive seal and develop a wiping action that resists contamination. This thoroughly redesigned product offering provides and improvement in cycle life and performance for both topside and subsea applications.

Significant engineering enhancements • Refined Tungsten Carbide seal trim design • Guided hydraulic damping technology • Enhanced bolted plunger guide • Upgraded dynamic plunger T-Seal INFO@gilmore.com www.gilmore.com GEN2 PRESSURE REGULATOR -082020-001-01

Gilmore Pressure Regulator, Hydraulic Pilot

GEN2 Pressure Regulator, Hydraulic Pilot Threaded seal carrier

Piston dynamic T-seal with double backup rings

Refined Tungsten Carbide seal trim design Auxiliary Port

Benefits Qualified above API 16D requirements and IADC Control Valve Qualification Testing Recommendation 10,000 cycles at full flow rates, tested at varying regulated set pressure ranges Resilient Tungsten Carbide seal technology Guided hydraulic damping technology Improved deadband performance • Single and dual inlet styles • NPT, SAE and Seal Sub options • Up to 6000 psi supply pressure • 300 - 5000 psi regulated pressures

Enhanced bolted plunger guide Corrosion resistant alloys material construction throughout Threaded seal carrier alignment SAE gauge and auxiliary ports Full performance data available Drop-in replacement for legacy Gilmore Hydraulic Pilot Regulators *Patented

DRILLING | PRODUCTION | INDUSTRIAL INFO@gilmore.com INFO@Gilmore.com www.gilmore.com GEN2 PRESSURE REGULATOR -082020-