Gilmore GEN2 Pressure Regulator-Compensator Product Sheet

Gilmore

Pressure Regulator, Compensator

Compensated spring chamber protects against harsh subsea conditions.

This Gilmore GEN2 Pressure Regulator with spring chamber Compensator has the same identical flow port footprint as the legacy regulators. This thoroughly redesigned product offering provides and improvement in cycle life and performance.

Significant engineering enhancements: • Guided hydraulic damping technology • Enhanced bolted plunger guide • Improved set point resolution

INFO@gilmore.com www.gilmore.com GEN2 PRESSURE REGULATOR, COMPENSATED -041221-001-01

Gilmore Pressure Regulator, Compensator

GEN2 Pressure Regulator, Compensator Protected mounting bracket Fill port

Fully enclosed spring chamber

CRA springs Guided wear band

Tungsten Carbide shear seals

Auxilliary port

Benefits Qualified above API 16D requirements

10,000 cycles at full flow rates and pressures Extended adjustable regulated pressure rangeavailable from 2,000 psi to 4,500 psi with Compensator Guided hydraulic damping technology Improved deadband performance Enhanced bolted plunger guide Upgraded dynamic plunger T-Seal Threaded seal carrier alignment SAE code 62 connections Fully enclosed spring chamber

• Outlet and Inlet • Multiple ranges from 2,000 psi to 4,500 psi regulated pressure • Other options available

DRILLING | PRODUCTION | INDUSTRIAL INFO@gilmore.com INFO@Gilmore.com www.gilmore.com www.gilmore.com GEN2 PRESSURE REGULATOR, COMPENSATED -041221-001-01

CRA Material Construction • Refined Tungsten Carbide seal trim • Nitronic 60 Plunger and Seal Carrier • T316 Spring Housing *Patented