Klock Werks 2022 Harley-Davidson® Catalog

PA RT S F O R H A R L E Y-DAV I DS O N 1 MADE IN THE USA

GETKLOCKED.COM

BIKE INDEX FIND WHAT YOU WANT, WHEN YOU WANT IT!

STREET ELECTRA ULTRA & TRI-GLIDE

ROAD GLIDE

ROAD KING

FLTR - FLTRXS - CVO

FLHR - FLHRXS - CVO

iOmounts™.................... 4-11

iOmounts™.................... 4-11

FLARE™...................... 29-30

FLHT - FLHXS - CVO

FLARE™...................... 22-26

FLARE™...................... 28-30

iOmounts™.................... 4-11

HANDLEBARS KlipHanger.......................... 36

HANDLEBARS KlipHanger.......................... 36

HANDLEBARS KlipHanger.......................... 36

FRONT FENDERS Benchmark Series..........42-43 Tire Hugger Series.........44-45 Big Wheel Series...........52-53

FRONT FENDERS Benchmark Series..........42-43 Tire Hugger Series.........44-45 Big Wheel Series...........52-53

REAR FENDERS Benchmark.......................... 54 The One............................... 54

REAR FENDERS Benchmark.......................... 54 The One............................... 54

REAR FENDERS Builder Series..................... 43 For Softail........................... 43 Softail Slim......................... 41

DYNAMAT......................... 59

SMALL PARTS Flush-Mount Front Axles..... 60 Fork-N-Finish Piece............. 60 Oil Cooler Guard................. 64 Saddlebag Hinge Inserts..... 62

SMALL PARTS Dash & Ignition Relocation.... 61 Flush-Mount Front Axles..... 60 Oil Cooler Guard................. 64

FLARE™...................... 16-21 HANDLEBARS KlipHanger.......................... 36 Ergo Bars............................ 37 FRONT FENDERS Benchmark Series..........42-43 Tire Hugger Series.........44-45 Big Wheel Series...........52-53 REAR FENDERS Benchmark.......................... 54 The One............................... 54 DYNAMAT......................... 59 SMALL PARTS Curvaceous Dash................ 61 Fairing Vent Screen............ 64 Flush-Mount Front Axles .... 60 Fork-N-Finish Piece............. 60 Lower Fillers....................... 62 Oil Cooler Guard................. 64 Speaker Grille Covers......... 60 Saddlebag Hinge Inserts..... 62 Upper Fillers....................... 62 Windshield Trim.................. 63

SMALL PARTS Curvaceous Dash................ 61 Fairing Side Vent Screens... 65 Flare™ Nuts........................ 65 Flush-Mount Front Axles..... 60 Fork-N-Finish Piece............. 60 Oil Cooler Guard................. 64 Saddlebag Hinge Inserts..... 62 Upper Fillers ...................... 62 Windshield Trim.................. 65

SOFTAIL FLS - FLST - FXST iOmounts™.................... 4-11

FRONT FENDERS Benchmark Series..........42-43 Tire Hugger Series.........44-45 Fatboy................................. 40 Softail Slim......................... 41

DYNA FXR SPORTSTER FXD - FXR - XL

KLEANING PRODUCTS THE COMPLETE LINEUP........ .68-69

iOmounts™.................... 4-11 FLARE™........................... 27 FRONT FENDERS 19" Series......................48-49 Tire Hugger Series.............. 46 SMALL PARTS Flare™ Nuts........................ 65

2

MADE IN THE USA

GETKLOCKED.COM

THE KREW IT TAKES TEAMWORK TO MAKE THE DREAM WERK Since 1997, Klock Werks has tripled its employees, created the Klock Werks brand line of parts, and been blessed with many bike features in national and international magazines.

possible. In hindsight, it’s really not about the accomplishments as much as what we learned along the way. We will never forget our humble beginnings and all the people that had faith in us.

After setting multiple land speed records and making history on the Bonneville Salt Flats, our team received more awards, recognition and attention than we ever dreamed

People "buy" from people. At Klock Werks we are proud of ours! True to our small town upbringing, we are committed to caring for our customers and providing products we

are proud of as a team. You will find family and faith at the core in all facets of our daily lives, and we love to share our story with others.

Stop by our shop for a tour when you pass through Mitchell, South Dakota. We welcome you to be part of the Klock Werks family! #GETKLOCKED

MADE IN THE USA

GETKLOCKED.COM

3

Hey!

PERCH MOUNT FOR H-D 0636-0048 PG. 6

What's up?

Klock Werks has new phone mounts added to their product line!

Really?!

Totally! They have new solutions for motorcycle, off-road, home, office and even cars!

4

MADE IN THE USA

GETKLOCKED.COM

DEVICE MOUNTS Klock Werks has designed easy to install phone mounts that incorporate our patented iOmounts® system!

With multiple styles to choose from, it’s possible to mount in nearly any location! Simply install the mount on your bike with included hardware, attach the razor-thin iOdisc™ to your device (which works with most smooth and hard phone cases) and connect to the powerful iOcore™ magnetic carrier.

Ea c h k it : in c lu d e s

SEMISPHERE MOUNT (1)

MAGNETIC iOcore™ (1)

Multiple mount styles to choose from allows never ending mounting possibilities

An extra strong magnet with brute strength

iOdisc™ (2)

NECESSARY HARDWARE

A razor-thin, unobtrusive steel disk that adheres to the device

We wouldn’t leave you hanging.

If hardware is necessary, you bet it’s included

+ STRONG AND SECURE

ROTATIONAL

BONUS!

Enjoy your ride, knowing that these mounts are strong enough to withstand the pressure of high speeds when riding

Infinite rotational adjustments can be made for proper placement

If you upgrade to a new phone or GPS, you don’t have to buy a new mounting system!

Use the spare iOdisc™ or purchase more!

ONCE THE iOdisc™ IS ADHERED TO YOUR DEVICE, EASILY DETACH FROM THE PHONE MOUNT AND CONNECT TO OTHER iOmounts PRODUCTS, INCLUDING nomad™ FOR YOUR OFF-ROAD VEHICLE, CAR, HOME, AND MORE!

MADE IN THE USA

GETKLOCKED.COM

5

PERCH MOUNT FOR H A RL E Y-DAVIDSON Klock Werks offers multiple motorcycle-specific device mount styles.

Each kit comes with two iOdiscs™ (a razor-thin, unobtrusive steel disk that adheres to the device), magnetic iOcore™, Semisphere Mount, phone tether and mounting hardware.

FITS 1996+ BIG TWIN • 1996+ SPORTSTER (EXCEPT PAN AMERICA, STREET 500 AND 750) DESCRIPTION Right Side Mount

FINISH Chrome

PART # 0636-0103

Right Side Mount

Black

0636-0104

Left Side Mount

Chrome

0636-0047

Left Side Mount

Black

0636-0048

IT'S A SIMPLE, SECURE, UNIVERSAL SYSTEM.

1 6

INSTALL The Semisphere Mount bolts to your stock lever clamp. Hardware included.

MADE IN THE USA

GETKLOCKED.COM

2 24 hrs

ADHERE Adapt your device by adhering a steel iOdisc™.

3M VHB adhesive cures fully in 72 hours.

3

AT TACH Once the iOcore™ is placed on the Semisphere, your device is ready to be attached.

UNLIKE COMPETITORS, THE MAGNET DOES NOT ATTACH TO THE DEVICE AND IT IS STRONG ENOUGH TO WITHSTAND THE PRESSURE OF HIGH SPEEDS WHEN RIDING.

AMBIDEXTROUS MOUNT FOR H A RL E Y-DAVIDSON The Ambidextrous phone mounts can be used on the right or left side of your handlebars. Similar to all of our phone mounts, simply install the mount to your bike with included hardware, attach the razor-thin stainless steel iOdisc™ to your device, and connect to the powerful iOcore™ magnetic carrier.

FITS 1996+ BIG TWIN • 1996+ SPORTSTER (EXCEPT PAN AMERICA, STREET 500 AND 750) DESCRIPTION

PART #

Chrome Mount

0636-0184

Black Mount

0636-0183

CENTER RISER MOUNT FOR H A RL E Y-DAVIDSON The Center Riser Phone Mount secures devices within view on any 84+ model with 3.5" center to center riser. Creates the perfect location for speedometer and map apps!

FITS MOST H-D 1984+ MODELS WITH 3.5" CENTER TO CENTER RISER DESCRIPTION

PART #

Chrome Mount

0636-0053

Black Mount

0636-0054

MADE IN THE USA

GETKLOCKED.COM

7

This simple and solid construction can withstand just about anything! The patented, ultra-strong magnetic interface and mount retention lip secures devices in the most severe of off-road environments. nomad™ utilizes the razor-thin iOdisc™ that adheres to your device to connect to the iOcore™, which is the magnetic carrier on the nomad™ strap. Secure cell phones, devices, gauges and more onto handlebars, ROPS, and ATV racks with the flexible strap assembly.

ADJUSTABLE STR AP Heavy duty, flexible strap does not scratch chrome or powder coated surfaces

nomad™ DEVICE MOUNT With its flexible strap mount, the nomad™ is quick and easy to install on any bar that is .5" to 2" diameter. Includes Device Mount and two iOdiscs™.

DESCRIPTION

PART #

nomad™ fits .5" to 2" in diameter

0636-0055

nomadXL™ DEVICE MOUNT nomadXL™ utilizes the same technology as the original nomad™, allowing adjustability up to 5.5" in diameter. Includes Device Mount and two iOdiscs™.

ULTR A-STRONG MAGNETIC iOcore™

DESCRIPTION

PART #

nomadXL™ fits .5 to 5.5" in diameter

0636-0150

Strong enough for rugged trails, sleek enough for the street

8

MADE IN THE USA

GETKLOCKED.COM

WORKS ON ANY SMOOTH BACK, HARD CASE!

UNIVERSAL PHONE MOUNT UNIV ERS A L FIT MEN T Want to have your device within arms reach on the trail, on the farm, on the boat or in your hot rod? Look no further than this custom solution to your everyday need. The Universal Phone Mount attaches easily to any flat surface you can imagine.

Comes complete with everything needed for both a bolt-on (hardware) and adhesive (3M adhesive patch) installation.

MOUNTS TO MOST FLAT SURFACES DESCRIPTION Universal Phone Mount

PART # 0636-0192

PERFECT FOR YOUR RV, BOAT, SEMI, HOT ROD, GOLF CART AND MORE!

ROCKER SWITCH DEVICE MOUNT FOR S WITCH K NOCKOU T HOL E L OCATIONS Finally a universal rocker switch mount that easily assembles in a standard dash switch knockout slot. Designed to install easily from the front of the dash, this mount allows quick access to cell phones, devices, and gauges.

FITS .75” X 1.375” SWITCH KNOCKOUT HOLE LOCATIONS DESCRIPTION Rocker Switch Device Mount

PART # 0502-0555

COMING SOON! A PPL ICATIONS FOR CA RS A ND T RUCKS Watch GetKlocked.com for even more iOmounts® phone mount applications. Whether you drive a Ford truck or a Honda sedan, we will have something for you!

MADE IN THE USA

GETKLOCKED.COM

9

iOstand™ FOR FUL L-SIZE TA BL E T S The iOstand™ is the most functional and flexible iPad stand and tablet mount on the market. It lifts your device up 7" and rotates in any direction for the perfect viewing angle (360 rotating).

This universal pro tablet stand will change how you use your device. It is the perfect tablet mount for the kitchen, improves the ergonomics of your desktop or workspace, and looks great anywhere in the home or office. Measures 9.5" tall with a 6" base.

DESCRIPTION

PART #

Stainless Stand

0636-0207

Black Stand

0636-0208

White Stand

0636-0209

iOmini™ FOR PHONE S A ND SM A L L TA BL E T S The iOmini™ is a universal stand for cell phones and small tablets that works with the iPad mini, iPhones, Android phones, small tablets, and e-readers. The stand lifts your phone or tablet up 6" and rotates in any direction for the perfect viewing angle.

Measures 7.75" tall with a 4" base.

DESCRIPTION

PART #

Stainless Mini Stand

0636-0210

Black Mini Stand

0636-0211

White Mini Stand

0636-0212

iOwall™ FOR TA BL E T S, PHONE S A ND OT HER OB JEC T S The iOwall™ is a simple wall mount for iPads, tablets, phones, artwork and other objects and devices. It installs in a just a few minutes on practically any wall surface.

DESCRIPTION Stainless iOwall Black iOwall White Satin iOwall

10

MADE IN THE USA

GETKLOCKED.COM

PART # KWD-WALL-BLK KWD-WALL-SS KWD-WALL-WHT

DEVICE TETHER FOR iOmounts® No matter where you are – close to home or far away – the Klock Werks Device Tether will keep your smartphone close at hand. Its functional design allows you to use it with almost all phone and case combinations.

For additional versatility, utilize the included Tether-Clip to attach your smartphone to your bag or belt loop.

The Device Tether can be used with all iOmounts® Phone Mounts to give you an added sense of security and peace of mind when using or mounting your smart device.

Fits with most standard smartphone cases.

DESCRIPTION Device Tether - 1 Set

PART # 0636-0195

iOdisc™ A razor-thin (0.025") steel adaptor that instantly adheres to any device; the iOdisc™ is your connection to the Klock Werks Phone Mounts. Two iOdiscs™ come with each Phone Mount and nomad™, but if you need to adapt more devices these products can be purchased separately.

Works with most smooth and hard phone cases.

DESCRIPTION iOdisc™ for Phone Mounts - Pack of 2

PART # 0636-0045

iOcore™ The iOcore™ is the magnetic assembly that is the heart of all Klock Werks Phone Mounts. It is available in 4 colors for a customized look.

DESCRIPTION

PART #

Black Magnetic iOcore™

0636-0038

Blue Magnetic iOcore™

0636-0039

Gray Magnetic iOcore™

0636-0040

Red Magnetic iOcore™

0636-0043

COMING SOON! A PHONE MOUN T FOR A N Y L IFE S T Y L E Take your phone everywhere you go knowing it's mounted securely. When we say there are more awesome solutions coming, we mean it!

iOtraveler

nomad+

MADE IN THE USA

GETKLOCKED.COM

11

FLARE™ FOR 96-13+ FLH 2310-0225 PG. 17

BILLBOARD FLARE™ 2310-0388 PG. 31

12

MADE IN THE USA

FLARE™ FOR SPORT GLIDE 2310-0690 PG. 31

GETKLOCKED.COM

THE STORY OF THE FLARE™ Less than 3 weeks after winning the Discovery Channel's Biker Build-Off in 2006, Klock Werks found themselves at the Bonneville Salt Flats with their winning WFB (Way Fast Bagger) and Laura Klock as the pilot. In the first 2 passes she set a National Land Speed Record.

However, even with the best suspension installed, the bike experienced an unsettling lift from the front end with increasing speeds and that’s when Klock Werks set out to design a windshield that would make the bike more stable at high speeds.

Brian kept it simple and started by holding his arm out the window while driving home from Bonneville, testing airflow with his hand held in different positions to figure out how to add downforce. From there a prototype was designed, and the Flare™ Windshield was born. After extensive planning and testing, including an incredible opportunity to test the design in Nascar Country at the A2 Wind Tunnel in Mooresville, NC, the Flare™ Windshield is now available to you!

MADE IN THE USA

GETKLOCKED.COM

13

FLARE™ WINDSHIELD REDIRECT THE WIND TO IMPROVE YOUR RIDE. The Klock Werks Flare™ Windshield was originally developed out of a need for stability at high speeds while racing on the Bonneville Salt Flats. This innovative and patented design features “hips” on the sides that re-route air to create downforce on the front of the bike while the “flip” at the top kicks the air up, sending it back as clean, less turbulent air for the rider and passenger. The Flare™ has fundamentally changed the way we ride.

CLEAR

TINT

DARK SMOKE

SOLID BLACK

NOTE: Solid Black versions are opaque. These may not be suitable for shorter riders.

THE FLIP Creates clean, less turbulent air for rider and passenger

THE HIPS Adds downforce for improved stability at highway speeds

LOOK FOR THE LOGO Our logo is always front and center on every authentic Flare™

14

BUILT TO LAST

SLEEK STYLING

MADE IN THE USA

Made from hard-coated polycarbonate for superior strength and durability

The trademark sleek styling of the Flare™ complements your bike

We source from companies we know and trust, supporting communities in the USA

MADE IN THE USA

GETKLOCKED.COM

FIND YOUR FLARE™ SIZE REALLY DOES MATTER Over the years, we’ve learned that what works for your buddy might not work for you.

Like shoes, one size does not fit all. As a result, Klock Werks now offers a wide selection of sizes for you to choose from. Follow these easy steps below to Find Your Flare™!

In most cases, Klock Werks recommends you choose a Flare™ size that you can look over comfortably.

1

2

GRAB A BUDDY

GET IN YOUR RIDING POSITION

To ensure the most accurate measurement, recruit a friend that can assist you with this process. While measuring by yourself is possible, it can be difficult.

Sit on your motorcycle, and get comfortable. Try to sit like you do when you ride the majority of the time. Remember, the longer we ride the more we tend to slouch which may impact your needed Flare™ size.

3

4

MEASURE FOR YOUR IDEAL FLARE™

CHOOSE A FLARE™ SIZE

Place a yard stick horizontally above your top lip.

Hold it level (parallel to the ground), and have your buddy measure vertically from the bottom edge up, in the center of the existing windshield, to determine your Flare™ Windshield size.

For the best performance, Klock Werks recommends you choose a Flare™ size that is comfortably lower than your line of sight, but not lower than your chin.

STILL NOT 100% SURE WHICH FLARE™ SIZE TO CHOOSE? The Try It Before You Buy It program is available, in select areas, for you to test ride the Flare™.

This ensures you find the best fit for you and your ride. To find a dealer near you that offers the program, check out the Dealer Locator at GETKLOCKED.COM.

MADE IN THE USA

GETKLOCKED.COM

15

11.5" 10.5"

8.5"

6.5"

5"

FL ARE™ WINDSHIELDS HOW THE VERTICAL HEIGHT IS MEASURED ON THE

FOR 2014+ FLH

8.5" FLARE™

SIZE

FITMENT

FOR 2014+ MODELS :

4"

Measure from the center mounting point in the fairing, straight up.

5"

DESCRIPTION

6.5" FOR 2014+ FLHT · FLHTC · FLHX AND H-D FL TRIKE MODELS

8.5"

8" 10.5"

11.5"

NEED HELP FINDING THE FLARE™ FOR YOU?

CLEAR

Check out "Find your Flare™" on page 15.

16

MADE IN THE USA

GETKLOCKED.COM

TINT

DARK SMOKE

SOLID BLACK

PART #

Dark Smoke

2310-0673

Solid Black

2310-0672

Tint

2310-0705

Dark Smoke

2310-0572

Solid Black

2310-0571

Tint

2310-0473

Dark Smoke

2310-0474

Solid Black

2310-0475

Tint

2310-0476

Dark Smoke

2310-0477

Clear

2310-0682

Tint

2310-0683

Dark Smoke

2310-0684

Clear

2310-0479

Tint

2310-0478

Dark Smoke

2310-0634

NOTE: Solid Black versions are opaque.

These may not be suitable for shorter riders.

4.5"

5.5"

7"

8"

9.25"

11.5"

4"

11.5"

10.5" 8.5" 6.5" 8"

9.5"

10.5"

3.5" 6" 4"

FL ARE™ WINDSHIELDS

FOR 96-13 FLH FITMENT

DESCRIPTION

SIZE 3.5”

6.5”

FOR 1996-2013 FLHT · FLHTC · FLHX AND H-D FL TRIKE MODELS

8.5”

10.5"

11.5”

FOR 1986-1995 FLHT · FLHTC MODELS

CLEAR

TINT

DARK SMOKE

SOLID BLACK

6.5"

PART #

Tint

2310-0222

Dark Smoke

2310-0223

Solid Black

2310-0224

Tint

2310-0211

Dark Smoke

2310-0212

Solid Black

2310-0213

Tint

2310-0273

Dark Smoke

2310-0274

Solid Black

2310-0275

Clear

2310-0715

Tint

2310-0716

Dark Smoke

2310-0717

Clear

2310-0226

Tint

2310-0225

Dark Smoke

2310-0633

Dark Smoke

2310-0209

6.5" FLARE™ FOR 1996-2013 MODELS : Measure from the center mounting point in the fairing, straight up.

6"

new!

HOW THE VERTICAL HEIGHT IS MEASURED ON THE

NEED HELP FINDING THE FLARE™ FOR YOU?

NOTE: Solid Black versions are opaque.

These may not be suitable for shorter riders.

Check out "Find your Flare™" on page 15.

MADE IN THE USA

GETKLOCKED.COM

17

ORANGE ICE FLARE™ 2310-0743 BLACKED OUT W/CONTRAST LOGO TRIM 2350-0510 PG. 20

RED ICE 2310-0745

18

MADE IN THE USA

YELLOW ICE 2310-0744

GETKLOCKED.COM

BLUE ICE 2310-0747

GREEN ICE 2310-0746

new!

ICE FLARE™ Klock Werks Flare™ is the ORIGINAL windshield of its kind, and has surprised riders everywhere with not only how great it looks, but also with how well it performs. The innovative design features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability vs. riding with a stock shield. The “flip” at the top of the Flare™ is designed to kick the air up and back as “clean”, less turbulent air for the rider and passenger.

The kolored Flare™ motorcycle windshields are made from arcylic and have a vibrant flourescent edge to give your motorcycle a little extra pop!

ICE FL ARE™

FOR 96-13 FLH SIZE

FITMENT

3.5"

FOR 1996-2013 H-D FLH

6.5"

DESCRIPTION

PART #

Red Ice

2310-0758

Orange Ice

2310-0756

Yellow Ice

2310-0757

Green Ice

2310-0759

Blue Ice

2310-0760

Red Ice

2310-0735

Orange Ice

2310-0733

Yellow Ice

2310-0734

Green Ice

2310-0736

Blue Ice

2310-0737

ICE FL ARE™

FOR 2014+ FLH SIZE

FITMENT

4"

FOR 2014+ H-D FLH

6.5"

RED ICE

ORANGE ICE

DESCRIPTION

PART #

Red Ice

2310-0745

Orange Ice

2310-0743

Yellow Ice

2310-0744

Green Ice

2310-0746

Blue Ice

2310-0747

Red Ice

2310-0740

Orange Ice

2310-0738

Yellow Ice

2310-0739

Green Ice

2310-0741

Blue Ice

2310-0742

YELLOW ICE

GREEN ICE

BLUE ICE

MADE IN THE USA

GETKLOCKED.COM

19

KW LOGO 2350-0323

FLARE™ WINDSHIELD TRIM

A Z T EC

FOR H-D FL H After installing literally thousands of Flare™ Windshields at events and locations over the years, we put together a solid line of easy to install, stylish designs that add the final touch and detail to set your bike apart from others. Hardware included.

BLACK CONTRAST CHROME

FLW FOR H-D 2014+ FLHT · FLHTC · FLHX · AND FL TRIKE MODELS STYLE

FINISH

Aztec

Black Contrast

2350-0319

PART #

FLW

Black Contrast

2350-0321

FLW

Chrome

2350-0331

KW Logo

Black Contrast

2350-0323

KW Logo

Blacked Out

2350-0510

Landing

Chrome

2350-0335

Relief

Chrome

2350-0337

BLACK CONTRAST

CHROME

K W L OGO

BLACK CONTRAST BLACKED OUT

FOR H-D 1996-2013 FLHT · FLHTC · FLHX · AND FL TRIKE MODELS STYLE

FINISH

Aztec

Chrome

2350-0328

FLW

Chrome

2350-0330

KW Logo (KERF)

Black Contrast

2350-0322

Landing

Black Contrast

2350-0324

Landing

Chrome

2350-0334

Relief

Chrome

2350-0336

L A NDING

PART # BLACK CONTRAST CHROME

REL IEF

BLACK CONTRAST CHROME

20

MADE IN THE USA

GETKLOCKED.COM

FAIRING VENT SCREEN FOR H-D 2014+ FL H Add a custom touch to the front of your fairing. Available in Honeycomb or Round pattern mesh aluminum, the Klock Werks Fairing Vent Screen is easy to install. Designed to stop large bugs and road debris from entering through your fairing vent!

FOR H-D 2014+ FLHT · FLHTC · FLHX · AND FL TRIKE MODELS STYLE

FINISH

Round Pattern

Satin

2330-0121

Round Pattern

Black

2330-0200

Honeycomb Pattern

Satin

2330-0122

HONEYCOMB

PART #

ROUND

KLEANING PRODUCTS RECOMMENDED CLEANER FOR YOUR FL ARE™ At Klock Werks, we don't just design and produce awesome parts for your motorcycle. We are enthusiasts who ride with a need to clean our own Flare™ Windshields, painted parts, chrome surfaces and engines! We tested countless products in the market. After testing, we engineered our own water-based cleaning agent that includes a protective wax polish to create a complete kleaning product lineup. This is what we use and we are excited to share it with you!

SHINE WERKS Shine Werks cleans, shines and protects plastic, leather, acrylic, plexiglass, lexan, chrome, fiberglass, and paint. Invisible protective coating protects surfaces and repels dirt, dust, fingerprints, smudges and bugs. Resists scratching and marring of surfaces. Dries quickly and buffs to a streak free shine!

DESCRIPTION 4 oz. Spray Bottle

PART # 3704-0193-SINGLE

Case of 12 - 4 oz. Bottles

3704-0193

16 oz. Spray Bottle

3704-0197

Gallon

3704-0212

CHECK OUT THE COMPLETE LINEUP OF KLEANING PRODUCTS ON PAGE 68 MADE IN THE USA

GETKLOCKED.COM

21

PRO-TOURING FLARE™

SPORT FLARE™

A wider, more full-coverage option for riders and passengers that prefer the maxiumum amount of wind protection for the long haul.

Streamlined designs with radical curves that offer a sporty stance. Compliments the lines of the fairing with a more aggressive profile.

15" 12"

14"

10"

9" 6" 7"

9.25"

9.75"

8.5"

10"

12"

5.5"

HOW THE VERTICAL HEIGHT IS MEASURED ON THE

11"

FL ARE™ WINDSHIELDS

FOR 2015+ FLTR

14" SPORT FLARE™

SPORT FLARE™

FOR 2015+ MODELS :

SIZE

FITMENT

Measure in the middle from the bottom edge, straight up.

6" 9" FOR 2015+ FLTR

9.75"

new!

11" 14"

DESCRIPTION

PART #

Dark Smoke

2310-0670

Solid Black

2310-0671

Dark Smoke

2310-0581

Solid Black

2310-0582

Tint

2310-0750

Dark Smoke

2310-0751

Tint

2310-0569

Dark Smoke

2310-0570

PRO-TOURING FLARE™ SIZE

FITMENT new!

NEED HELP FINDING THE FLARE™ FOR YOU?

FOR 2015+ FLTR

Check out "Find your Flare™" on page 15.

22

MADE IN THE USA

10" 12"

15"

GETKLOCKED.COM

DESCRIPTION

PART #

Tint

2310-0752

Dark Smoke

2310-0753

Tint

2310-0583

Dark Smoke

2310-0584

Clear

2310-0568

Tint

2310-0567

Dark Smoke

2310-0566

PRO-TOURING FLARE™

SPORT FLARE™

A wider, more full-coverage option for riders and passengers that prefer the maxiumum amount of wind protection for the long haul.

Streamlined designs with radical curves that offer a sporty stance. Compliments the lines of the fairing with a more aggressive profile.

14"

12"

12" 8" 9"

9.5"

11"

5.5" HOW THE VERTICAL HEIGHT IS MEASURED ON THE

FL ARE™ WINDSHIELDS

14" PROTOURING FLARE™

FOR 98-13 FLTR SPORT FLARE™ SIZE

FITMENT

8" FOR 1998-2013 FLTR 12"

DESCRIPTION

FOR 1998-2013 MODELS:

PART #

Tint

2310-0207

Dark Smoke

2310-0214

Solid Black

2310-0196

Tint

2310-0194

Dark Smoke

2310-0358

Measure from the center mounting point, straight up.

11"

PRO-TOURING FLARE™ SIZE

FITMENT new!

12"

FOR 1998-2013 FLTR 14"

CLEAR

TINT

DARK SMOKE

SOLID BLACK

DESCRIPTION

PART #

Tint

2310-0748

Dark Smoke

2310-0749

Tint

2310-0481

Dark Smoke

2310-0482 NEED HELP FINDING THE FLARE™ FOR YOU?

NOTE: Solid Black versions are opaque and cannot be seen through. These may not be suitable for shorter riders.

Check out "Find your Flare™" on page 15.

PAIR THIS FLARE™ WITH OUR FLARE™ NUTS. LOOK FOR PART #2404-0548 ON PAGE 12.

MADE IN THE USA

GETKLOCKED.COM

23

GREEN ICE FLARE™ 2310-0726 BLACK W/ CONTRAST LOGO TRIM 2350-0509 PG. 26

24

MADE IN THE USA

GETKLOCKED.COM

new!

ICE FLARE™ Klock Werks Flare™ is the ORIGINAL windshield of its kind, and has surprised riders everywhere with not only how great it looks, but also with how well it performs. The innovative design features “hips” at the outer edge of the shield that re-route the air to add downforce to the front of the bike, improving stability vs. riding with a stock shield. The “flip” at the top of the Flare™ is designed to kick the air up and back as “clean”, less turbulent air for the rider and passenger.

The kolored Flare™ motorcycle windshields are made from arcylic and have a vibrant flourescent edge to give your motorcycle a little extra pop!

ICE FL ARE™

FOR 98-13 FLTR FITMENT

FOR 1998-2013 H-D FLTR

SIZE

8" SPORT

DESCRIPTION

PART #

Red Ice

2310-0720

Orange Ice

2310-0718

Yellow Ice

2310-0719

Green Ice

2310-0721

Blue Ice

2310-0722

ICE FL ARE™

FOR 2015+ FLTR FITMENT

SIZE

6" SPORT FOR 2015+ H-D FLTR 9" SPORT

RED ICE

GREEN ICE ORANGE ICE

DESCRIPTION

PART #

Red Ice

2310-0725

Orange Ice

2310-0723

Yellow Ice

2310-0724

Green Ice

2310-0726

Blue Ice

2310-0727

Red Ice

2310-0730

Orange Ice

2310-0728

Yellow Ice

2310-0729

Green Ice

2310-0731

Blue Ice

2310-0732

YELLOW ICE

GREEN ICE

BLUE ICE

MADE IN THE USA

GETKLOCKED.COM

25

FLARE™ WINDSHIELD TRIM FOR H-D 2015+ FLT R Add style and protection while securing your Road Glide Flare™ Windshield. Made from high quality 10 ga. billet aluminum and black anodized. Hardware included.

FOR H-D 2015+ FLTR MODELS STYLE

FINISH

KW Logo

PART #

Black Contrast

2350-0497

Black w/Contrast Logo

2350-0509

Blacked Out

2310-0706

Chrome

2350-0707

BLACK CONTRAST

BLACKED OUT

BLACK W/ CONTRAST LOGO

CHROME

FAIRING SIDE VENT SCREENS FOR H-D 2015+ FLT R Accent the vent system in the 2015+ Road Glide fairing with Klock Werks Fairing Side Vent Screens. Our vent screens are easy to install and will help prevent larger bugs and other road debris from entering through your fairing vents. Sold in pairs.

FOR H-D 2015+ FLTR MODELS STYLE

FINISH

Round Pattern

Satin

2330-0153

Round Pattern

Black

2330-0199

Honeycomb Pattern

Satin

2330-0145

Honeycomb Pattern

Black

2330-0198

HONEYCOMB

Metal washer molded into flange to prevent well-nut from pushing through fairing

Molded from superior grade material

PART #

ROUND

FLARE™ NUTS FOR H-D FLTR AND FXRP FAIRING Factory well-nuts are prone to failure after a few uses. Klock Werks Flare™ Nuts are manufactured out of a superior material and have a revolutionary design, including a metal washer molded into the flange to prevent the well-nut from pushing through the windshield mounting hole and ending up inside your fairing. In addition, we’ve added a superior brass threaded insert that tightens the well-nut, but allows for continuous installation and removal. These advantages ensure these are the last set of well-nuts you will need!

FOR 1998-2013 FLTR AND FXRP FAIRINGS DESCRIPTION Flare™ Nuts - pack of 5

Shoulder molded on to brass insert to prevent pull through

26

MADE IN THE USA

GETKLOCKED.COM

PART # 2404-0548

9” DARK SMOKE

FXRP FLARE™ WINDSHIELDS

9” DARK SMOKE

The Klock Werks Flare™ Windshield is now available to FXR Fans that are utilizing the FXRP Style Fairings currently on the market! The Flare™ Windshield not only enhances the lines of this style fairing perfectly but it will also significantly increase overall performance.

FOR USE ON FXRP STYLE FAIRINGS WITH STANDARD BOLT PATTERN SIZE 9"

DESCRIPTION

PART #

Solid Black

2310-0636

Dark Smoke

2310-0635 SOLID BLACK

DARK SMOKE

NOTE: Solid Black versions are opaque and cannot be seen through. These may not be suitable for shorter riders.

FXRP FAIRING NOTE: DIP ON SIDES

FXRD, FXRT AND FXRP FLARE™ WINDSHIELDS A Flare™ Windshield design that is specifically designed to fit FXRD and FXRT fairings but will also fit the FXRP fairings as well.

FOR USE ON FXRT, FXRD AND FXRP STYLE FAIRINGS WITH STANDARD BOLT PATTERN SIZE

DESCRIPTION

PART #

8"

Solid Black

2310-0714

12"

Dark Smoke

2310-0704 DARK SMOKE

SOLID BLACK

NOTE: Solid Black versions are opaque and cannot be seen through. These may not be suitable for shorter riders.

FXRT FAIRING NOTE: SPEAKER PODS

MADE IN THE USA

GETKLOCKED.COM

27

TINT 2310-0689 PG. 30

28

MADE IN THE USA

GETKLOCKED.COM

BILLBOARD FLARE™ FOR HARLEY-DAVIDSON Modeled after the original Flare™ Windshield for Baggers, now motorcycles without fairings can control the air that flows around them. Klock Werks air management expertise means the Flare™ Windshield will move the pocket of air, increase riding stability, and add a sleek look to your bike while improving your overall ride.

CLEAR

TINT

DARK SMOKE

THE FLIP

THE HIPS

SLEEK STYLE

Creates clean, less turbulent air for rider and passenger

Re-routes air to add downforce and aid stability

The trademark sleek styling of the Flare™ compliments your bike

LOOK FOR THE LOGO!

BUILT TO LAST

MADE IN THE USA

Our logo is always front and center on an authentic Flare™

Made from hard-coated polycarbonate for added strength and durability

We source from companies we know and trust in the USA

MADE IN THE USA

GETKLOCKED.COM

29

HOW T O FIND YOUR BIL L B OA R D FL A R E ™:

BILLBOARD FLARES™

CLEAR 2310-0387

1. Find your family 2. Locate your model 3. Determine your bracket style* 4. Choose your size and color

TOURING FAMILY ROAD KING

FLHR

ROAD KING CLASSIC

FLHRC

ROAD KING SPECIAL

FLHRS

CVO ROAD KING

FLHRSE

FREEWHEELER

FLRT

SHORT 16 1/2”

FLHR FLHRC FLHRS FLHRSE

DARK SMOKE 2310-0708

king size detachable h-style

CLEAR 2310-0342

TALL 19 1/2”

*The Billboard Flare™ does not include mounting hardware. It is designed to work with factory mounting brackets and hardware.

SOFTAIL FAMILY BAD BOY

FXSTSB

FATBOY

FLSTF

FATBOY LO

FLSTFB

HERITAGE SOFTAIL

FLST

HERITAGE SOFTAIL CLASSIC

FLSTC

NIGHT TRAIN

FXSTB

SOFTAIL BREAKOUT

FXSB

KING SIZE DETACHABLE “H" STYLE

SOFTAIL CUSTOM

FXSTC

SOFTAIL DELUXE

FLSTN

SOFTAIL SLIM

FLS

SOFTAIL STANDARD

FXST

30

MADE IN THE USA

CLEAR 2310-0389

SHORT 17”

TINT 2310-0390

DARK SMOKE 2310-0710

00-17

king size detachable h-style

CLEAR 2310-0340

TALL 20”

TINT 2310-0339 DARK SMOKE 2310-0711

FXSB FXSBSE

quick release compact style

TALL 18”

CLEAR 2310-0348

CLEAR 2310-0688

DYNA CONVERTIBLE

FXDS

DYNA DAYTONA

FXDB

DYNA SUPER GLIDE

FXD

DYNA SUPER GLIDE CUSTOM DYNA SUPER GLIDE SPORT DYNA WIDE GLIDE 1993 TO 2005 DYNA WIDE GLIDE 2006 TO 2013

SHORT 17” 2018+

king size detachable h-style

FXDWG FXDWG FXDL

STREET BOB

FXDB

STREET BOB W/ 103

FXDBP

SWITCHBACK

FLD

SUPER GLIDE

FXR

SUPER GLIDE LOW FXLR RIDER CUSTOM SUPER GLIDE LOW FXRS RIDER (RUBBER MOUNT) SUPER GLIDE LOW FXRS-SP RIDER SPORT EDITION

883 LOW

XL 883L

883 CUSTOM

XL 883C

IRON 883

XL 883N

NIGHTSTER

XL 1200N

1200 ROADSTER

XL 1200R

SEVENTY-TWO

XL 1200V

FORTY-EIGHT

XL 1200X

FXR FXLR FXRS FXDB FXDBP

TINT 2310-0689 DARK SMOKE 2310-0713 CLEAR 2310-0686

TALL 20”

FXDX

DYNA LOW RIDER

GETKLOCKED.COM

FLHC FLHCS FLDE FLS

FXDC

SPORTSTER FAMILY

KING SIZE NOSTALGIC “U” STYLE

FLS FLST FLSTC FLSTF FLSTFB

2015+

king size detachable h-style

CVO SOFTAIL BREAKOUT FXSBSE

DYNA / FXR FAMILY

COMPACT & QUICK DETACHABLE STYLE

FLRT

FXD

BRACKET TYPES:

TINT 2310-0341 DARK SMOKE 2310-0709

HOW T HE BIL L B OA R D HE IGH T IS ME A SUR E D: Measure from the headlight cutout (just above the headlight) up to the top of the shield.

TINT 2310-0388

TINT 2310-0687 DARK SMOKE 2310-0712

detachable compact style

quick release compact style

1 SIZE 17 3/4”

FXRS-SP

CLEAR 2310-0348

CLEAR 2310-0387

SHORT 16 1/2”

DARK SMOKE 2310-0708

king size detachable h-style

FLD

TINT 2310-0388

CLEAR 2310-0342

TALL 19 1/2”

TINT 2310-0341 DARK SMOKE 2310-0709

FXDWG

XL 883L XL 883C XL883N XL1200N XL1200R XL1200V

06-13

quick release compact style

detachable compact style

quick release compact style

1 SIZE 173/4”

CLEAR 2310-0348

TALL 17 3/4”

CLEAR 2310-0348

TINT 2310-0388

SPORT GLIDE FLARE™ WINDSHIELD Sport Glide owners, you asked, we listened. This functional and sexy windshield is designed to keep a low sport profile, while kicking up the air to create a less turbulent wind pocket. Available in one height, we've created this windshield for your unique fairing.

Measures approximately 8" from the lip of the fairing to the top of the windshield.

FOR 2018+ HARLEY-DAVIDSON SPORT GLIDE SIZE 8"

DESCRIPTION Dark Smoke

PART # 2310-0690

DARK SMOKE

MADE IN THE USA

GETKLOCKED.COM

31

2 3

4 1

1

2

14" KLIPHANGER BARS 0601-3000 PG. 36

32

MADE IN THE USA

3

6.5" FLARE™ FOR 2014+ FLH 2310-0474 PG. 16

FLH FLARE™ WINDSHIELD TRIM 2350-0331 PG. 63

GETKLOCKED.COM

4

FLH FAIRING VENT SCREEN 2330-0122 PG. 64

1

2 3

4 7

5

6

1

9" FLARE™ FOR 2015+ FLTR 2310-0581 PG. 22

5

16-19" LEVEL TIRE HUGGER SERIES FRONT FENDER 1401-0425 PG. 45

2

FLTR FLARE™ WINDSHIELD TRIM 2350-0497 PG. 65

6

FLUSH-MOUNT FRONT AXLES 0214-0357 PG. 60

3

10" KLIPHANGER BARS 0601-3124 PG. 36

4

FLTR FAIRING SIDE VENT SCREENS 2330-0198 PG. 65

7

SADDLEBAG HINGE INSERTS 3501-1011 PG. 62

MADE IN THE USA

GETKLOCKED.COM

33

1

3 2

4

1

2

9" FLARE™ FOR 2015+ FLTR 2310-0581 PG. 22

34

MADE IN THE USA

3

10" KLIPHANGER PULLBACK BARS 0601-3124 PG. 36

PERCH MOUNT FOR H-D 0636-0048 PG. 6

GETKLOCKED.COM

4

CURVACEOUS DASH 2202-0111 PG. 61

KLIPHANGER BARS NO TWO RIDERS ARE THE SAME Our innovative, machined "knuckles" allow the control/grip portion of the KlipHanger Bar to be positioned exactly where you want your wrists to be, and then are locked into place with the same technology used with clip-on race bars.

Works with heated grips and designed for throttle by wire applications. 1 1/4" DOM tubing.

CHROME/ CHROME

BLACK/ BLACK

Unique knuckles allow controls and grip to be adjusted for custom fit

Bar can be adjusted towards rider or fairing

+

+

ULTIMATE IN RIDER COMFORT AND ADJUSTABILITY

VARIETY IS THE SPICE OF LIFE

Position the control/grip portion of the bar exactly where you want your wrists to be

Bars are offered in two heights to fit a wide range of preferred riding positions

MADE IN THE USA

GETKLOCKED.COM

35

KLIPHANGER BARS FOR TOURING MODEL S Fits perfectly with the narrower center section of the 2015+ Road Glide models with anti-vibration clamps.

FOR 2015+ FLTR AND CUSTOM APPLICATIONS (EXCEPT CVO MODELS) SIZE 10" 14"

BAR

KNUCKLE

Chrome

Chrome

0601-3126

PART #

Black

Black

0601-3124

Chrome

Chrome

0601-3129

Black

Black

0601-3127

NOTE: Will accept stock cables and wiring. Does not fit CVO models.

Custom application may be possible. Call for details: (605) 996-3700.

FOR 2008+ FLHT, FLHX, H-D TRIKES, AND CUSTOM APPLICATION (BATWING FAIRINGS) SIZE 10” 14”

BAR

KNUCKLE

Chrome

Chrome

0601-3003

PART #

Black

Black

0601-3001

Chrome

Chrome

0601-3000

Black

Black

0601-2998

NOTE: May require cable extensions. Will also fit 1996-2007 touring models with 2008+ FLH type master cylinder and clutch perch.

Call for details: (605) 996-3700.

FOR ROA D KINGS, SOF TA IL S A ND CUS TOM A PPL ICATIONS FOR ROAD KING FL SOFTAILS AND WITH 1" HANDLEBAR CLAMP AND CUSTOM APPLICATIONS SIZE 14" 19"

36

MADE IN THE USA

GETKLOCKED.COM

BAR

KNUCKLE

Chrome

Chrome

0601-5369

PART #

Black

Black

0601-5368

Chrome

Chrome

0601-5628

NOTE: Will require wire extensions and longer cables. Requires 2008+ Touring or aftermarket master cylinder. Will also fit 1996-2007 touring models with 2008+ FLH type master cylinder and clutch perch. Softail models may require an upgraded master cylinder depending on model.

ERGO BARS A MORE REL AXED AND COMFORTABLE WRIST POSITION Ergonomically correct wrist position not only reduces stress to your wrists, but may help reduce that pinched feeling between your shoulder blades after a day of riding! Klock Werks Ergo Bars are offered in different styles to cover a large range of riders and preferred riding positions. Ergo bar options are designed specifically to adjust your wrist to a more natural relaxed position, versus riding with stock bars. Ergo bars accept stock controls/housings, and are pre-drilled and slotted for internal wiring. They are designed to work with stock length cables, wires and heated grips.

Rise: 11.5" | Width: 35" | Center Width: 14" | Pull Back: 3"

ERGO BARS FOR 1986+ FL H FOR 1986+ FLHT · FLHX · H-D FL TRIKE AND CUSTOM APPLICATIONS STYLE UP BAR BACK BAR

BAR

PART #

Black

0601-3007

Chrome

0601-3006

Black

0601-3005

Chrome

0601-3004

NOTE: For easier installation of 2014+ Ergo Bars, Klock Werks recommends a wire extension Kit. Drag Specialties Part #: 2120-0783.

MADE IN THE USA

GETKLOCKED.COM

37

1

3

2

38

MADE IN THE USA

GETKLOCKED.COM

5

4

1

BENCHMARK FRONT FENDER 1401-0195 PG. 43

2

4" STRETCH REAR FENDER 1401-0246 PG. 55

3

LIGHTED LICENSE PLATE FRAME 2030-0839 PG. 55

4

SOFTAIL DASH & IGNITION RELOCATION KIT 2106-0045 PG. 61

5

19" CHROME KLIPHANGERS 0601-5628 PG. 36

MADE IN THE USA

GETKLOCKED.COM

39

2

1

3

1

2

LEVEL BIG WHEEL SERIES FRONT FENDER 1401-0442 PG. 53

40

MADE IN THE USA

3

8" FLARE™ FOR 98-13 FLTR 2310-0207 PG. V

FLUSH-MOUNT AXLES 0214-0357 PG. 60

GETKLOCKED.COM

STAMPED STEEL FENDERS

LOOK FOR THE

PICK A STYLE, BOLT IT ON! Changing your fender is a great way to add some personal style! The Klock Werks design team has great options ranging from traditional bagger style, to tire hugging options, to one-piece front fenders for big wheel bagger projects.

LOGO! When you buy a fender from Klock Werks, you can count on quality and accurate bolt-on fitment.

To make installation even easier, some of our fenders are packaged with mounting blocks and hardware in one box.

1 STAMPED STEEL FENDER 14-gauge steel fender in your profile of choice.

2 MOUNTING BLOCKS Machined from billet aluminum.

Fit Kits include satin finish mounting blocks, unless otherwise specified.

+

+

14-GAUGE STEEL

E-COAT

All Klock Werks fenders are stamped from 14-gauge steel using precision, deep-draw stamping technology

Klock Werks goes the extra mile to add e-coat, a process to prevent rust and corrosion

+

+

LASER CUT

PAINTER APPROVED

Laser cut using 5-axis laser technology to ensure accurate fitment for direct bolt-on installation

A consistently smooth and flawless finish minimizes bodywork

3 NECESSARY HARDWARE We wouldn't leave you hanging.

Everything you need to mount this fender is included!

IF YOU A RE NOT BU YING A FIT KIT, M A K E SURE YOU ORDER BL OCKS!!

Front Fender Mounting Blocks (Klock Blocks) are designed to provide perfect spacing for easy installation of any Klock Werks Front Fender. Machined from billet aluminum. Sold separately in pairs.

MADE IN THE USA

GETKLOCKED.COM

41

— BENCHMARK SERIES —

Installation requires use of front fender MOUNTING BLOCKS on some models. Some fitments are available as Fit Kits.

42

MADE IN THE USA

GETKLOCKED.COM

FRON T FENDERS

BENCHMARK SERIES Traditional bagger style without the factory rivets. Benchmark Style Front Fenders offer rivetless smooth sides, an extended (1-1/2”) rear tail and a lower profile than your stock fender. The 14-gauge stamped steel is rigid enough to act as a fork brace. Benchmark fenders are 6-1/2” wide. Fitments available for 16", 17”, 18”, 19” (fits up to 140 series tire) or 21” wheels (fits up to 130 series tire).

TOURING MODELS FOR 2014+ FL H T · FL HX · FL HR · FLT R A ND H-D T RIK E MODEL S STYLE

BLOCK FINISH

16"/17"/18"/19" FRONT WHEEL

SIZE

Benchmark

Includes Satin Blocks

PART NUMBER 1401-0421

21" FRONT WHEEL

Benchmark

Includes Satin Blocks

1401-0422

X X

FOR 1983-2013 FL H T · FL HX · FL HR · FLT R A ND H-D T RIK E MODEL S 16"/17"/18"/19" FRONT WHEEL

Benchmark

21" FRONT WHEEL

Benchmark

MOUNTING BLOCKS

1401-0196 1401-0194

Mounting Blocks

Chrome

1410-0022

Mounting Blocks

Satin

1410-0023 — BENCHMARK SERIES —

SOFTAIL MODELS FOR 2018+ FL HC · FL HC S · FL DE · FL SL STYLE

BLOCK FINISH

16"/17"/18"/19" FRONT WHEEL

SIZE

Benchmark

Includes Satin Blocks

PART NUMBER 1401-0670

21" FRONT WHEEL

Benchmark

Includes Satin Blocks

1401-0669

X X

FOR 198 4-2017 FL S T MODEL S 16"/17"/18"/19" FRONT WHEEL

Benchmark

No Blocks Required

1401-0197

21" FRONT WHEEL

Benchmark

No Blocks Required

1401-0195

No Blocks Required

1401-0624

FOR 2012-2017 SOF TA IL SL IM 16"/17"/18"/19" FRONT WHEEL

Benchmark

16”/17”/18”/19"

21"

MADE IN THE USA

GETKLOCKED.COM

43

— TIRE HUGGER SERIES —

LEVEL

44

MADE IN THE USA

SLICER

GETKLOCKED.COM

WRAPPER

TUDE

FRON T FENDERS

TIRE HUGGER SERIES If you’d like to step away from traditional “full coverage” fender style, take a look at our Tire Hugger Series Front Fender options. Designed to hug your tire closely and let you show off your wheel, these direct bolt-on replacement fenders will dramatically change the look of your bike. The use of 5-axis laser cutting ensures accurate fitment, and the stamped steel with e-coat minimizes any need for bodywork and continues to resist rust and corrosion even after it’s painted. The 14-gauge steel is even strong enough to act as a fork brace for your front end.

H-D TOURING MODELS FOR 2014+ FL H T · FL HX · FL HR · FLT R A ND H-D T RIK E MODEL S SIZE

16"/17"/18"/19" FRONT WHEEL 19" WITH A 130/60-19 new!

21" FRONT WHEEL

new!

BLOCK FINISH Includes Satin Blocks

PART NUMBER 1401-0425

Slicer

Includes Satin Blocks

1401-0426

Wrapper

Includes Satin Blocks

1401-0427

Tude

Includes Satin Blocks

1401-0428

Thickster

Includes Satin Blocks

1401-0432

La Ventana

Includes Satin Blocks

1401-0846

Henry

Includes Satin Blocks

1401-0936

Level

Includes Satin Blocks

1401-0433

Slicer

Includes Satin Blocks

1401-0434

Wrapper

Includes Satin Blocks

1401-0435

Tude

Includes Satin Blocks

1401-0436

Thickster

Includes Satin Blocks

1401-0440

La Ventana

Includes Satin Blocks

1401-0847

Henry

Includes Satin Blocks

1401-0937

X X X X X X X X X X X X X X

— TIRE HUGGER SERIES —

120/70-21 TIRE

STYLE Level

FOR 1983-2013 FL H T · FL HX · FL HR · FLT R A ND H-D T RIK E MODEL S Level

1401-0236

16"/17"/18/19"

Slicer

1401-0220

FRONT WHEEL

Wrapper

1401-0224

Tude

1401-0232

19" WITH A 130/60-19 TIRE

21" FRONT WHEEL 120/70-21 TIRE

THICKSTER

1401-0212

Thickster Mounting Blocks

Chrome, 7/8" Wide

Mounting Blocks

Satin, 7/8" Wide

1410-0029 1410-0030

Level

1401-0237

Slicer

1401-0221

Wrapper

1401-0225

Tude

1401-0233 1401-0213

Thickster Mounting Blocks

Chrome, 1" Wide

1410-0027

Mounting Blocks

Satin, 1" Wide

1410-0028

LA VENTANA

HENRY

Installation requires use of front fender MOUNTING BLOCKS on some models.

new!

new!

MADE IN THE USA

Some fitments are available as Fit Kits.

GETKLOCKED.COM

45

SOFTAIL MODELS FOR 2018+ FL HC · FL HC S · FL DE · FL SL SIZE

STYLE

BLOCK FINISH

16"/17"/18"/19" FRONT WHEEL

Wrapper

Includes Satin Blocks

PART NUMBER 1401-0671

Slicer

Includes Satin Blocks

1401-0673

21" FRONT WHEEL 120/70-21 AND 130/60-21 TIRE

Wrapper

Includes Satin Blocks

1401-0672

Slicer

Includes Satin Blocks

1401-0674

X X X X

FOR 1986-2017 FLST (ALL EXCEPT SPRINGER) AND CUSTOM APPLICATIONS 1401-0260

Wrapper Style 16"/17"/18"/19" FRONT WHEEL

21" FRONT WHEEL 120/70-21 AND 130/60-21 TIRE

1401-0258

Thickster Style Mounting Blocks

Chrome, 1/8" Wide

Mounting Blocks

Satin, 1/8" Wide

1410-0033 1410-0034 1401-0267

Wrapper Style

1401-0265

Thickster Style Mounting Blocks

Chrome, 3/8" Wide

1410-0031

Mounting Blocks

Satin, 3/8" Wide

1410-0032

FOR 198 4-2013 F XS T · F XS T B · F XS TI · F XS T BI MODEL S 1401-0219

Slicer

— TIRE HUGGER SERIES —

21" FRONT WHEEL 120/70-21 TIRE

21" SKINNY FRONT WHEEL 90/90-21 TIRE

1401-0223

Wrapper Mounting Blocks

Chrome, 1/2" Wide

1410-0043

Mounting Blocks

Satin, 1/2" Wide

1410-0044 1401-0282

Slicer

1401-0280

Wrapper Mounting Blocks

Chrome, 1-1/4" Wide

1410-0045

Mounting Blocks

Satin, 1-1/4" Wide

1410-0046

BLOCK FINISH

PART NUMBER

DYNA FOR 1993-20 05 F XDWG SIZE

STYLE

1401-0219

Slicer 21" FRONT WHEEL 120/70-21 TIRE

21" SKINNY FRONT WHEEL 90/90-21 TIRE

1401-0223

Wrapper Mounting Blocks

Chrome, 1/2" Wide

1410-0043

Mounting Blocks

Satin, 1/2" Wide

1410-0044 1401-0282

Slicer Style

1401-0280

Wrapper Style Mounting Blocks

Chrome, 1-1/4" Wide

1410-0045

Mounting Blocks

Satin, 1-1/4" Wide

1410-0046

BREAKOUT FENDER BLOCKS Mount any Klock Werks 21” FLST front fender on a 2013 or newer Breakout (FXSB) with Klock Werks Front Fender Mount Adapter Kit. Machined from billet aluminum. Sold in pairs. Hardware included.

FOR 2013+ SOFTAIL BREAKOUT WITH KLOCK WERKS 21” TIRE HUGGER FRONT FENDER | FOR 1986+ FLST SOFTAIL PART #

DESCRIPTION Chrome

1410-0154

Raw

1410-0153

NOTE: Breakout Fender Blocks are used ONLY to mount with Klock Werks 21” Tire Hugger Front Fenders for 86+ FLST Softail.

46

MADE IN THE USA

GETKLOCKED.COM

TIRE HUGGER SIZING CHART 16" / 17" / 18" / 19" FRONT WHEEL Measures 6.25" outside width and will accommodate all 130 series tires and most 140 series tires.

21" FRONT WHEELS Measures 5.875” outside width and will fit the current 120/70/21 and the new 130/60/21 series tires on 3 1/2” wide rims.

THE SKINNY 21" The Skinny 21” measures 4 1/2” outside width and will fit models listed with the stock narrow rim and tire up to 100/100-21.

— TIRE HUGGER SERIES —

LEVEL

SLICER

WRAPPER

THICKSTER

MADE IN THE USA

GETKLOCKED.COM

47

— 19" SERIES —

LEVEL

48

MADE IN THE USA

WRAPPER

GETKLOCKED.COM

SLICER

KLUB

FOR DY N A S, SP OR T S T ERS, F XR 'S A ND MORE!

19" SERIES Modern day performance and styling for your ride. Klock Werks is on-trend with 7 different front fender styles to help you lead the pack and take your project one step further. Klock Werks fenders are stamped from 14-gauge steel and e-coated to prevent rust and corrosion.

Deep draw stamping technology provides a smooth surface that won't require hours of bodywork at the painter, saving you cash. The 14-gauge steel is even strong enough to act as a fork brace for your front end.

FOR 2018+ F XL R SIZE

19" FRONT WHEEL 90/90-19" TIRE

STYLE

BLOCK FINISH

Level

Includes Satin Blocks

PART NUMBER 1401-0707

Wraper

Includes Satin Blocks

1401-0704

Slicer

Includes Satin Blocks

1401-0710

Klub

Includes Satin Blocks

1401-0705

Top Hat

Includes Satin Blocks

1401-0708

TFL

Includes Satin Blocks

1401-0709

P-Tom

Includes Satin Blocks

1401-0706

X X X X X X X

FOR 20 06+ F XD/F XDL , F XDB, F XDC - 90/90 -19" W HEEL/ TIRE Includes Chrome Blocks

1401-0543

Level

Includes Satin Blocks

1401-0536

Wrapper

Includes Chrome Blocks

1401-0544

Wrapper

Includes Satin Blocks

1401-0537

Slicer

Includes Chrome Blocks

1401-0545

Slicer

Includes Satin Blocks

1401-0538

19" FRONT WHEEL

Klub

Includes Chrome Blocks

1401-0546

90/90-19" TIRE

Klub

Includes Satin Blocks

1401-0539

Top Hat

Includes Chrome Blocks

1401-0547

Top Hat

Includes Satin Blocks

1401-0540

TFL

Includes Chrome Blocks

1401-0548

TFL

Includes Satin Blocks

1401-0541

P-Tom

Includes Chrome Blocks

1401-0549

P-Tom

Includes Satin Blocks

1401-0542

X X X X X X X X X X X X X X

— 19" SERIES —

Level

FOR 1986+ XL (E XCEP T XL120 0X , 2011-2013 883L/120 0C), 198 4-1994 F XR , 1991-20 05 DY N A W/39MM FRON T FORK

FENDER ONLY -

19" FRONT FENDER 90/90-19" TIRE

TOP HAT

TFL (TAPERED FRONT LEG)

Level

1401-0529

Wrapper

1401-0530

Slicer

1401-0531

Klub

1401-0532

Top Hat

1401-0533

TFL

1401-0534

P-Tom

1401-0535

P-TOM (WINDOW)

Installation requires use of front fender MOUNTING BLOCKS on some models.

Some fitments are available as Fit Kits.

MADE IN THE USA

GETKLOCKED.COM

49

— FATBOY —

FATBOY FRONT FENDERS FOR 2018+ M8 FAT B OY These Tire Hugger Series front fenders were designed to accent the thickness of the Fatboy design. The Wrapper follows the rim and tire, featuring a blunt front and rear finish to accent the solid wheel and front end. The Slicer features a straight cut on the front and base to accent the frame and strut lines while hugging the tire and wheel line. The Roller drops the sides to cover the tire and highlight the rim with rounded corners for a rolled look.

FOR 2018+ FLFB · FLFBS SIZE 160/60-18 TIRE

STYLE

BLOCKS

Wrapper

Includes Satin Blocks

1401-0701

Slicer

Includes Satin Blocks

1401-0702

Roller

Includes Satin Blocks

1401-0703

WRAPPER

50

MADE IN THE USA

PART #

SLICER

GETKLOCKED.COM

X X X

ROLLER

— SOFTAIL SLIM —

SOFTAIL SLIM REAR FENDERS FOR SOF TA IL SL IM Choose from two rear fender lengths that are both longer than stock to give a stretched look. Pre-drilled to use stock mounting locations and hardware, there is no better way to achieve kustom so easily!

Choose the "Smooth" style for a super clean back fender or "Frenched" with a recessed license plate pocket that provides a flush finish when used with a Klock Werks License Plate Frame. The Slim Rear style is comparable to a stock Heritage Softail rear fender, while the +4" Extended style is another 4" longer in the tail section.

FOR 2012-2017 SOFTAIL SLIM STYLE

FINISH

Stock Length Rear

Smooth

PART # 1401-0551

4" Stretch Rear

Smooth

1401-0579

4" Stretch Rear

Frenched

1401-0580

FOR 2018+ SOFTAIL SLIM STYLE

FINISH

PART #

4" Stretch Rear

Smooth

1401-0711

4" Stretch Rear

Frenched

1401-0712

L ICENSE PL AT E FR A ME STYLE

FINISH

License Plate Frame

Raw

PART # 2030-0230

License Plate Frame

Chrome

2030-0231

License Plate Frame

Chrome Lighted

2030-0839

NOTE: If using the frenched fender with Klock Werk’s lighted license plate frame, additional parts are needed from Harley-Davidson: 1 - Standoff (69933-08) // 3 ft. - Fender Conduit (6920018A1)

BENCHMARK FRONT FENDER FOR H-D SOF TA IL SL IM Benchmark Style Front Fenders offer rivet-less smooth sides and a lower profile than your stock fender. The 14-gauge stamped steel is rigid enough to act as a fork brace. Benchmark fenders are 6-1/2” wide. Fitments available for 16", 17”, 18”, 19” (fits up to 140 series tire).

2012-2017 SOFTAIL SLIM DESCRIPTION

PART #

16"/17"/18"/19" Front Wheel

MADE IN THE USA

1401-0624

GETKLOCKED.COM

51

— BIG WHEEL SERIES —

BENCHMARK

Installation requires use of front fender MOUNTING BLOCKS on some models.

Some fitments are available as Fit Kits.

52

MADE IN THE USA

GETKLOCKED.COM

LEVEL

FRON T FENDERS

BIG WHEEL SERIES Klock Werks Big Wheel Steel Front Fender options for your 23” or 26” front wheel with raked neck and/or tree setups offer the right lines that flow correctly around a big wheel. A slammed stance, perfect spacing, rivetless smooth sides and stretched rear sections define big wheel style.

These one piece stamped steel fenders are 6-1/2” wide, and come ready for paint. Bolt right on to make your big wheel look bad ass!

H-D TOURING MODELS FOR 2015-2016 FL H T · FL HX · FL HR · FLT R A ND H-D T RIK E MODEL S SIZE

23" RAKED TRIPLE TREE ONLY

26" RAKED FRAME

BLOCK FINISH

PART NUMBER

Benchmark

Includes Satin Blocks

1401-0450

Level

Includes Satin Blocks

1401-0451

Slicer

Includes Satin Blocks

1401-0452

Lil' Wrapper

Includes Satin Blocks

1401-0453

Shank

Includes Satin Blocks

1401-0454

Benchmark

Includes Satin Blocks

1401-0424

Level

Includes Satin Blocks

1401-0455

Slicer

Includes Satin Blocks

1401-0456

Lil' Wrapper

Includes Satin Blocks

1401-0457

Shank

Includes Satin Blocks

1401-0458

X X X X X X X X X X

— BIG WHEEL SERIES —

AND TRIPLE TREES

STYLE

FOR 1983-2013 FL H T · FL HX · FL HR · FLT R A ND H-D T RIK E MODEL S

23" RAKED TRIPLE TREE ONLY

26" RAKED FRAME AND TRIPLE TREES

SLICER

Benchmark Level Slicer Lil' Wrapper Shank Mounting Blocks Mounting Blocks Benchmark Level Slicer Lil' Wrapper Shank Mounting Blocks Mounting Blocks

Chrome Satin

Chrome Satin

1401-0441 1401-0442 1401-0443 1401-0444 1401-0445 1410-0022 1410-0023 1401-0360 1401-0446 1401-0447 1401-0448 1401-0449 1410-0022 1410-0023

SHANK

LIL' WRAPPER

MADE IN THE USA

GETKLOCKED.COM

53

REAR FENDERS STAMPED STEEL All Klock Werks Rear Fenders are stamped from 14-gauge US Steel and e-coated to prevent rust and corrosion.

The use of precision deep-draw stamping technology ensures a consistent flawless finish that minimizes body work. All mounting holes are pre-cut using 5-axis laser technology for accurate fitment and bolt-on ease.

THE ONE REAR FENDER FOR H-D 20 09+ TOURING MODEL S Klock Werks stamped steel rear fender with integrated bag/fender filler panels is "THE ONE" you've been waiting for! The one piece combination eliminates the need for separate rear fender and filler pieces, making installation simple while offering a seamless, smooth rear option for your bike.

THE ONE offers perfect spacing, lining up with 09+ rear top strut covers, and can be used with stretched or stock length bags. Integrated filler panels are 100% TIG welded to the fender. THE ONE accepts all stock detachable mounting hardware/brackets and comes pre-drilled with mounting holes.

FOR 2009+ FLHT · FLHX · FLHR · FLTR MODELS DESCRIPTION

FINISH

THE ONE

Frenched Plate Pocket

PART # 1401-0485

L ICENSE PL AT E FR A ME STYLE

FINISH

PART #

License Plate Frame

Chrome

2030-0248

License Plate Frame

Chrome Lighted

2030-0803

License Plate Frame

Black Lighted

2030-0804

6" STRETCHED BENCHMARK REAR FENDER FOR H-D 1997-20 08 FL TOURING MODEL S FOR 1997-2008 FLHT · FLHX · FLHR · FLTR MODELS SIZE 7.125 “ WIDE

STYLE

FINISH

PART #

6” Stretch Rear

Smooth

1401-0192

6” Stretch Rear

Frenched Plate Pocket

1401-0193

L ICENSE PL AT E FR A ME

1401-0193

54

MADE IN THE USA

GETKLOCKED.COM

STYLE

FINISH

License Plate Frame

Raw

2030-0230

PART #

License Plate Frame

Chrome

2030-0231

License Plate Frame

Chrome Lighted

2030-0839

BENCHMARK REAR FENDERS FOR H-D SOFTAILS Klock Werks Rear Fenders for Softails are available in either 4” stretch for dynamic styling or stock length for those of you that want to simply clean-up the back of your bike.

FOR 2018+ FLHC, FLHCS, FLDE SIZE 7.125" WIDE

STYLE

FINISH

4” Stretch Rear

Frenched Plate Pocket

1401-0675

PART #

4” Stretch Rear

Smooth

1401-0676

1401-0675

FOR 2000-2005 FXST, 1984+ FLST (EXCEPT FXSTD, 2007-2013 FLSTFB, 2008-2011 FLSTB) SIZE 7.125" WIDE

STYLE

FINISH

PART #

Stock Length Rear

Smooth

1401-0249

4” Stretch Rear

Frenched Plate Pocket

1401-0246

4” Stretch Rear

Smooth

1401-0248 1401-0250

4” Stretch Rear Stocker

NOTE: Only the 4” stretch rear stocker is precut to accept FLSTC-style taillight.

L ICENSE PL AT E FR A ME STYLE

FINISH

PART #

License Plate Frame

Raw

2030-0230

License Plate Frame

Chrome

2030-0231

License Plate Frame

Chrome Lighted

2030-0839

1401-0248

BUILDER'S SERIES 4” STRETCHED BENCHMARK REAR FENDER FOR CUSTOM APPLICATIONS These fenders are the exact same quality and dimensions as Klock Werks standard fenders but without the mounting holes. Builders Series Fenders are designed for your Shovelhead, Panhead, Rigid or other Kustom creations.

FOR CUSTOM APPLICATIONS · GREAT ON OLDER MODEL SOFTAILS SIZE

DESCRIPTION

FINISH

7.125" WIDE

4” Stretch Rear

Frenched Plate Pocket

1401-0251

4” Stretch Rear

Smooth

1401-0252

1401-0252

PART #

This part arrives raw, NOT e-coated.

NOTE: These fenders are NOT e-coated.

L ICENSE PL AT E FR A ME STYLE

FINISH

License Plate Frame

Raw

2030-0230

PART #

License Plate Frame

Chrome

2030-0231

License Plate Frame

Chrome Lighted

2030-0839

LICENSE PLATE FRAMES Klock Werks license plate frames are designed to fit the radius of our stamped steel rear fenders perfectly. Can also be used in custom applications. License plate frames are billet aluminum. Frames are easy to install, include mounting hardware and accepts most 4" x 7" license plates, may require triming. Available in a LED Lighted option too!

MADE IN THE USA

GETKLOCKED.COM

55

1

2

56

MADE IN THE USA

GETKLOCKED.COM

3

4

1

4" STRETCH REAR FENDER 1401-0246 PG. 55

2

LIGHTED LICENSE PLATE FRAME 2030-0839 PG. 55

3

SOFTAIL DASH & IGNITION RELOCATION KIT 2106-0045 PG. 61

4

BENCHMARK FRONT FENDER 1401-0197 PG. 43

MADE IN THE USA

GETKLOCKED.COM

57

BLUE ICE FLARE™ 2310-0727 PG. 25

21" SLICER TIRE HUGGER FRONT FENDER 1401-0434 PG. 45

PO WERED B Y

58

MADE IN THE USA

GETKLOCKED.COM

DYNAMAT ® IMPROVE YOUR AUDIO OUTPUT IN UNDER AN HOUR! Whether you have a stock stereo or something that's tricked out, Dynamat® always delivers! The Klock Werks Dynamat® Sound Control Kit reduces vibrations, giving you louder and clearer audio output from your speakers. The kit will give you tighter bass response, more pronounced mid-range tone, and a clear improvement in your sound system.

2014+ FLHT

2015+ FLTR

96-13 FLHT

98-13 FLTR

FAIRING SOUND CONTROL KITS All fairing kits are custom cut, resulting in no waste and no guesswork! There is no mystery behind how much product you will need, where you should put it and how much it will cost. These computer generated sheets of Dynamat® Xtreme® and Dynaliner® eliminate calculations, templating and cutting. Installation is quick and easy! You simply open the package, peel, stick and you're done!

FITMENT

PART #

FITMENT

PART #

2014+ H-D FLHT

0521-1492

2015+ H-D Road Glide (FLTR)

0521-1494

1996-2013 H-D FLHT

0521-1491

1998-2013 H-D Road Glide (FLTR)

0521-1493

SADDLEBAG SOUND CONTROL KIT All saddlebag kits are custom cut, resulting in no waste and no guesswork! With the computer-generated sheets of Dynamat® Xtreme® there is no mystery behind how much product you will need, where you should put it or how much it will cost.

Installation is quick and easy! Simply open the package, peel, stick and you're done!

FITMENT 2014+ H-D FLHT • FLHX • FLTR • FLHT with hard saddlebags

PART # 0521-1683

MADE IN THE USA

GETKLOCKED.COM

59

SMALL PARTS DETAILS MAT TER Take your ride to the next level and finish your build with accessories that provide both function and style. From accurate fitments, to coating and material choices, we stake our reputation with you on it and never cut short on quality.

FORK-N-FINISH PIECE LOWER FORK LEG CAP This cool little piece is CNC machined from 6061 Aluminum with your choice of show chrome or black powder coat finishes. Mounting hardware included is counter sunk for clean uninterrupted lines.

FOR H-D 2000-2013 FLH · FLHT · FLHR · FLHX · FLTR AND FL TRIKE WITH OEM FRONT FORKS DESCRIPTION

PART #

Chrome

0403-0039

Black

0403-0040

FLUSH-MOUNT FRONT AXLES Great style and great strength. Klock Werks Flush-Mount Front Axles are made from stress-proof steel that is two to three times stronger than stock and is black-nitrate coated for superior corrosion resistance. Also features polished stainless steel end caps for added longevity. Caps can be powder coated if desired. Easy to install.

SIZE

FITMENT For H-D 2000-2007 FLHT · FLH

1”

For H-D 2008+ FLH · FLHT · FLHR · FLHX · FLTR 2008-2011 FXDF · 2007-2010 FXST | 2013+ FXSB

25MM

DESCRIPTION

PART #

Polished

0214-0250

Black

0214-1985

Polished

0214-0357

Black

0214-1984

NOTE: Does not fit Tri-Glides

POLISHED STAINLESS STEEL CAPS

SPEAKER GRILLE COVERS Replace the factory cloth with these mesh-cut aluminum speaker grille covers to dress up your inner fairing or rear speakers. Mesh-cut aluminum speaker grille covers install using your stock hardware.

FRONT

MADE IN THE USA

DESCRIPTION Front Speaker Grilles (per pair) Rear Speaker Grilles (per pair)

For H-D 1996+ Tour Pak

REAR

60

FITMENT For H-D 1996-2013 FLHTC · FLHX · FL Trike Models

GETKLOCKED.COM

PART # 4405-0097 4405-0151

CURVACEOUS METAL DASH 2202-0111

CURVACEOUS METAL DASH Klock Werks Curvaceous Metal Dash smooths out your tank for a clean, low-profile look and accepts most aftermarket low-profile vented gas caps. Stretched look for a fraction of the cost. Stamped steel and e-coated, the Klock Werks dash is ready for paint! Easy to install. Dash trim included.

FOR H-D 2008+ FLHT · FLTR · FLHX AND FL TRIKE DESCRIPTION

PART #

Stock Length for stock FLH-style seat

2202-0111

Extended for stretched tanks

2202-0112

SOFTAIL DASH AND IGNITION RELOCATION KIT Here’s an innovative kit that gives your Softail a more streamlined, smooth, show finish. It visually increases the length of tank without actually stretching it.

The Klock Werks steel dash has a raw finish and fits stock-length Softail tanks. The kit reuses stock ignition switch and key; ignition switch mount replaces the horn mount and requires horn relocation. The ignition switch relocation mount is CNC-machined from 6061 Aluminum, show chromed, is easy to install and uses factory wiring. All necessary mounting hardware is included.

FOR H-D 2000-2017 FXST · FLST MODELS (EXCEPT FXS, FXSTD) DESCRIPTION

PART #

Complete Kit

2106-0045

Ignition Switch (Mount Only)

2106-0074

MADE IN THE USA

GETKLOCKED.COM

61

SADDLEBAG HINGE INSERTS FOR FL TOURING MODEL S Designed to replace the stock reflectors on your 2014+ factory hard saddlebags, Klock Werks Smooth, Special and Limited style Saddlebag Hinge Inserts are a quick and easy way to customize your bags! Inserts are machined from billet aluminum and chromed. Easy installation! Just remove your stock reflectors, and press Klock Werks inserts into place.

The 3M adhesive will hold them securely to your stock hinges.

Sold in pairs.

FOR H-D 2014+ FLHT, FLHX, FLHR, 2015+ FLTR ANY 2014+ FLH MODEL WITH STOCK SADDLEBAG HINGES STYLE

PART #

Smooth Version

3501-1073

Special Version

3501-1011

SMOOTH

SPECIAL

UPPER FILLERS All eyes will be on the rear of your bike when you choose Klock Werks Upper Fillers. These 16-gauge steel fillers have an E-coat finish (readyto-paint) and mate up to Klock Werks Lower Fillers or the stock panels on Street Glides, accenting the line of your fender and hiding clutter for a custom look. Upper Fillers are available in two versions: a smooth version for models with or without detachable backrests and a slotted version for models with detachable Tour-Pak®. Eliminates stock license plate mount bar. All are sold in pairs and include all necessary hardware and instructions to install them.

FOR H-D 1995-2008 FLH · FLHT · FLTR MODELS, 2006-2008 FLHX DESCRIPTION

PART #

Smooth fillers for use with or without detachable backrest

0504-0080

Slotted fillers for use with detachable Tour-Pak®

0504-0081

LOWER FILLERS Constructed from 16-gauge steel and e-coated for rust and corrosion resistance, they are the only steel filler designed to be used with or without detachables. Lower fillers are great to use in conjunction with Klock Werks Upper Fillers to smooth out the entire area. Lower Fillers are sold in pairs and include all necessary hardware and instructions to install them.

FOR H-D 1995-2008 FLH · FLHT · FLTR MODELS

62

MADE IN THE USA

GETKLOCKED.COM

STYLE

DESCRIPTION

PART #

For use with stock-length fender and stock-length hard saddlebags

Stock | Smooth

0504-0090

Stock | Detachable

0504-0091

KW LOGO 2350-0323

FLARE™ WINDSHIELD TRIM

A Z T EC

FOR H-D FL H After installing literally thousands of Flare™ Windshields at events and locations over the years, we put together a solid line of easy to install, stylish designs that add the final touch and detail to set your bike apart from others. Hardware included.

BLACK CONTRAST CHROME

FLW FOR H-D 2014+ FLHT · FLHTC · FLHX · AND FL TRIKE MODELS STYLE

FINISH

Aztec

Black Contrast

2350-0319

PART #

FLW

Black Contrast

2350-0321

FLW

Chrome

2350-0331

KW Logo

Black Contrast

2350-0323

KW Logo

Blacked Out

2350-0510

Landing

Chrome

2350-0335

Relief

Chrome

2350-0337

BLACK CONTRAST

CHROME

K W L OGO

BLACK CONTRAST BLACKED OUT

FOR H-D 1996-2013 FLHT · FLHTC · FLHX · AND FL TRIKE MODELS STYLE

FINISH

Aztec

Chrome

2350-0328

FLW

Chrome

2350-0330

KW Logo (KERF)

Black Contrast

2350-0322

Landing

Black Contrast

2350-0324

Landing

Chrome

2350-0334

Relief

Chrome

2350-0336

L A NDING

PART # BLACK CONTRAST CHROME

REL IEF

BLACK CONTRAST CHROME

MADE IN THE USA

GETKLOCKED.COM

63

FLH FAIRING VENT SCREEN FOR H-D 2014+ FL H Add a custom touch to the front of your fairing. Available in Honeycomb or Round pattern mesh aluminum, the Klock Werks Fairing Vent Screen is easy to install. Designed to stop large bugs and road debris from entering through your fairing vent!

FOR H-D 2014+ FLHT · FLHTC · FLHX · AND FL TRIKE MODELS STYLE

FINISH

Round Pattern

Satin

PART # 2330-0121

Round Pattern

Black

2330-0200

Honeycomb Pattern

Satin

2330-0122

HONEYCOMB

ROUND

OIL COOLER GUARD FOR H-D TOURING MODEL S

new!

If you have a Softail and want to dress up your oil cooler area we have your solution. Using the same material to match our bagger vent screensl, this part will add some needed “pop” to that area in the center of your oil cooler trim. Simple install and available in chrome or gloss black.

FOR H-D 2017+ H-D TOURING MODELS STYLE

FINISH

Honeycomb

CHROME

PART #

Black

0713-0255

Chrome

0713-0256

BLACK

OIL COOLER GUARD FOR H-D SOF TA IL

new!

If you have a Softail and want to dress up your oil cooler area we have your solution. Using the same material to match our bagger vent screens, this part will add some needed “pop” to that area in the center of your oil cooler trim. Simple install and available in chrome or gloss black.

FOR H-D 2018+ SOFTAIL MODELS STYLE Honeycomb

CHROME

64

MADE IN THE USA

GETKLOCKED.COM

FINISH

PART #

Black

0713-0257

Chrome

0713-0258

BLACK

FLTR FAIRING SIDE VENT SCREENS FOR H-D 2015+ FLT R Accent the vent system in the 2015+ Road Glide fairing with Klock Werks Fairing Side Vent Screens. Our vent screens are easy to install and will help prevent larger bugs and other road debris from entering through your fairing vents. Sold in pairs.

FOR H-D 2015+ FLTR MODELS STYLE

FINISH

Round Pattern

Satin

PART # 2330-0153

Round Pattern

Black

2330-0199

Honeycomb Pattern

Satin

2330-0145

Honeycomb Pattern

Black

2330-0198

HONEYCOMB

ROUND

FLARE™ WINDSHIELD TRIM FOR H-D 2015+ FLT R Add style and protection while securing your Road Glide Flare™ Windshield. Made from high quality 10 ga. billet aluminum and black anodized. Hardware included.

FOR H-D 2015+ FLTR MODELS STYLE

KW Logo

FINISH

PART #

Black Contrast

2350-0497

Black w/Contrast Logo

2350-0509

Blacked Out

2310-0706

Chrome

2350-0707

BLACK CONTRAST

BLACKED OUT

BLACK W/ CONTRAST LOGO

CHROME

FLARE™ NUTS FOR H-D FLTR AND FXRP FAIRING Factory well-nuts are prone to failure after a few uses. Klock Werks Flare™ Nuts are manufactured out of a superior material and have a revolutionary design, including a metal washer molded into the flange to prevent the well-nut from pushing through the windshield mounting hole and ending up inside your fairing. In addition, we’ve added a superior brass threaded insert that tightens the well-nut, but allows for continuous installation and removal. These advantages ensure these are the last set of well-nuts you will need!

Metal washer molded into flange to prevent well-nut from pushing through fairing

Molded from superior grade material

FOR 1998-2013 FLTR AND FXRP FAIRINGS DESCRIPTION Flare™ Nuts - pack of 5

PART # 2404-0548

Shoulder molded on to brass insert to prevent pull through

MADE IN THE USA

GETKLOCKED.COM

65

7

66

MADE IN THE USA

GETKLOCKED.COM

1

4

2

5

3

1

11" SPORT FLARE™ FOR 2015+ FLTR 2310-0753 PG. 22

2

FLTR FLARE™ WINDSHIELD TRIM 2350-0707 PG. 26

3

LA VENTANA TIRE HUGGER SERIES FRONT FENDER 1401-0847 PG. 45

4

PERCH MOUNT FOR H-D 0636-0048 PG. 6

5

6

10" KLIPHANGER BARS 0601-3126 PG. 36

FLUSH-MOUNT FRONT AXLES 0214-0357 PG. 60

MADE IN THE USA

7

SADDLEBAG HINGE INSERTS 3501-1073 PG. 62

GETKLOCKED.COM

67

KLEANING PRODUCTS DEVELOPED BY RIDERS, FOR RIDERS At Klock Werks, we don't just design and produce awesome parts for your motorcycle. We are enthusiasts who ride with a need to clean our own Flare™ Windshields, painted parts, chrome surfaces and engines! We tested countless products in the market. After testing, we engineered our own water-based cleaning agent that includes a protective wax polish to create a complete kleaning product lineup. This is what we use and we are excited to share it with you!

SHINE WERKS REC OMMENDED CL E A NER FOR YOUR FL A RE ™ A ND MORE! Shine Werks cleans, shines and protects plastic, leather, acrylic, plexiglass, lexan, chrome, fiberglass, and paint. Invisible protective coating protects surfaces and repels dirt, dust, fingerprints, smudges and bugs. Resists scratching and marring of surfaces. Dries quickly and buffs to a streak free shine!

DESCRIPTION 4 oz. Spray Bottle

68

MADE IN THE USA

GETKLOCKED.COM

PART # 3704-0193-SINGLE

Case of 12 - 4 oz. Bottles

3704-0193

16 oz. Spray Bottle

3704-0197

Gallon

3704-0212

MATTE WERKS FORMUL AT ED TO CL E A N A ND PROT EC T M AT T E A ND S ATIN PA IN T FINISHE S Klock Werks Matte Werks is formulated to clean and protect matte and satin paint finishes. Matte Werks is a proprietary mixture of polymers that will clean away bugs and grime, and repel dirt, dust, fingerprints and smudges, all without adding gloss or greasiness.

PART #

DESCRIPTION 4 oz. Spray Bottle

3704-0198-SINGLE

Case of 12 - 4 oz. Bottles

3704-0198

16 oz. Spray Bottle

3704-0199

Gallon

3704-0394

ENGINE WERKS WAT ER B A SED PRODUC T TO RENE W T HE FINISH ON YOUR MOTOR Engine Werks is a unique water-based product designed to renew the powder coat finish on your motor. This product uses solvent free and non-flammable ingredients that are designed to deter dust and dirt from collecting on the surface of the motor. Simply spray Engine Werks on the cool, dry, powder coated surfaces of your motor and let dry. Renew as needed.

PART #

DESCRIPTION 4 oz. Spray Bottle

3704-0242-SINGLE

Case of 12 - 4 oz. Bottles

3704-0242

16 oz. Spray Bottle

3704-0243

Gallon

3704-0244

DETAIL WERKS

KLEAN WERKS KIT

WORKS GRE AT WIT H A L L K L E A NING PRODUC T S!

SM A L L ENOUGH TO FIT IN YOUR S A DDL EB AG!

Use your hands and fingers as deep cleaning tools for hard to reach places when detailing your bike, car or home with Klock Werks Detail Werks microfiber polishing gloves.

Includes one 4 oz. spray bottle each of Shine Werks, Engine Werks and Matte Werks, a pair of microfiber gloves and a cleaning cloth all packaged in one easy to carry kit!

DESCRIPTION Pair of Microfiber Gloves

PART # 3350-0249

DESCRIPTION Klean Werks Kit

PART # 3704-0241

MADE IN THE USA

GETKLOCKED.COM

69

WHERE WE STARTED...

We’re a team of men and women (and the occasional dog) who have found a way to mix passion and fuel every day. We make sure that you get the best parts for your ride —parts that are rigorously tested and American made— so that you can fuel your passions, enjoy your life, and enjoy your ride.

For over 25 years, our pioneering designs have changed the way riders and passengers have enjoyed their ride and expressed their individuality.

70

MADE IN THE USA

GETKLOCKED.COM

The last couple of years have been a wild ride. In 2019 we had a devestating flood that brought 4 feet of flood water into our main shop. Then 2020 created another hurdle with the global pandemic. Even with the hits, we refused to stop and in May 2022 we held our first ever ribbon cutting for the official opening of our Worldwide Distribution Center.

Thank you for the support over the years.

We couldn't do it without each and every one of you!

RIBBON CUTTING CEREMONY

... WHERE WE ARE TODAY!

WARRANTY If you believe you have a warranty related issue with a genuine Klock Werks branded part, please contact us immediately. We will be happy to replace the part with a new one if the conditions of our warranty policy are met. Klock Werks reserves the right to refuse any item we believe is damaged as a result of improper care. Please contact us directly for details on specific parts.

RETURNS & EXCHANGES All returns and exchanges are subject to a 20% restocking fee assessed at our discretion.

Any request to return or exchange a product must be made within 30 days of purchase (proof of purchase required). Refunds will only be issued on parts that are 100% new and never been installed. All items shipped back to Klock Werks must have a Return Merchandise Authorization number clearly displayed on the outside of the package. To request an authorization number simply email info@getklocked.com or call (605) 996-3700. Failure to request and display the RMA # properly may result in your package being refused. Klock Werks reserves the right to refuse any item we believe is damaged as a result of improper care.

DEALERS We are proudly distributed by Drag Specialties / Parts Unlimited, so we can be found almost anywhere! Check with your local dealer for availability on the parts you see listed here, or simply contact us directly and we’ll be happy to help! If you are a licensed motorcycle shop or business operating in a retail capacity and are interested in becoming a Klock Werks dealer, please contact us directly for details on how to get setup. We are easy to work with and would like to welcome you to our family.

IMPORTANT Careful thought and effort have been used to ensure accuracy in this catalog. However, mistakes can happen. Carefully test fit ALL parts prior to painting! Klock Werks will not be responsible for any painted parts, or assume any other liability due to an error in a parts listing. All prices, descriptions, fitments, and availability of the parts listed in this catalog are subject to change at any time and without notice. Contact us directly for the latest information.

MADE IN THE USA

GETKLOCKED.COM

71

MADE IN THE USA

We appreciate your support and love sharing in your passions. Follow along with us at #GETKLOCKED and share your experience with us @KLOCKWERKS on both Instagram and Facebook.

GETKLOCKED.COM

(605) 996-3700 915 S. Kimball Street Mitchell, SD 57301

2022HDR1 © 2022 KLOCK WERKS

72

MADE IN THE USA

GETKLOCKED.COM