Skip to main content

G&A_Autumn Newsletter 2026_Digital Version_V2

Page 1

G&A

News AUTUMN 2026

ISSUE 30

In this issue •

Customer Case Study | Cress Co – A New Partnership Built on Quality

•

Opening Our Doors to Future Talent

•

Industry Legend – Mark Sutcliffe


CONTENTS 3

Director’s Introduction

12-13

Industry Legend – Mark Sutcliffe

4

Opening Our Doors to Future Talent

14

5

Gray & Adams Showcases Trailer Innovation at Road Transport Expo 2026

Customer Case Study | AK Stoddart – Two Decades of Purpose-Built Refrigerated Transport for Scotch Beef

15

David Smith | 25-Year Long Service Award

6

Celebrating 150 Years with Warburtons

16

Neil Ritchie | 25-Year Long Service Award

7

St Andrews Primary Visit Gray & Adams Fraserburgh

17

Keith Mackenzie | 25-Year Long Service Award

8-9

Customer Case Study | Cress Co – A New Partnership Built on Quality

18-19

Ian Smith Reflects on His Career with Gray & Adams

20

Retirement Spotlight – Peter Foreman | Charles Reid

10

Beyond the Checkbox: How Passion, Precision, and Feedback Drive Our Promise to Deliver Quality

21

Retirement Spotlight – John Marshall | Alyn Falconer

11

Driving Sustainability Forward: We've Reached a New Environmental Milestone

22

Retirement Spotlight – John Whyte | Brian Cumming

23

Retirement Spotlight – Steve Hadfield | Rob Strachan | Jane Ramsay

2


D IRECTO R’S I N T R O D U C T I O N As we move through the second half of 2026, we are pleased to share Issue 30 of the Gray & Adams newsletter. This edition brings together new engineering firsts, long-standing customer partnerships and, as always, the people who make the business what it is. Long-term relationships remain the foundation of our business. On page 9 we mark more than twenty years of purpose-built refrigerated transport for AK Stoddart, with the arrival of Trailer 18 continuing a specification refined across successive orders. On pages 12 and 13 we introduce a newer partnership with Cress Co, a growing Scottish wholesaler whose first order of eight 14-tonne refrigerated vehicles has been out on the road since March. Page 10 celebrates 150 years of Warburtons, a milestone we were delighted to join them for in person, and one followed by a further order of twenty semi-trailers. Quality and environmental performance are covered on pages 14 and 15. Our Group Quality Manager, David Smith, sets out why quality is a promise to our customers rather than a certificate on the wall, and we share the news that our Car and Commercial Repair Centre has been awarded the Accident Repair Industry Environmental Standard (ARIES). Pages 16 and 17 feature an in-depth interview with Mark Sutcliffe, whose career across The Big Food Group, Warburtons, Co-op and Marshall Fleet Solutions has shaped some of the most significant developments in temperature-controlled distribution, with much of it spent working alongside our teams.

PAGE 8

PAGES 12–13

On page 18 we report back from the Road Transport Expo 2026, where we exhibited three distinct builds, including our double-deck demonstrator, the Marks & Spencer specification rigid and the Blakemore urban trailer. Our commitment to the next generation of talent runs through this edition. Page 8 covers our expanded Recruitment Open Day at Fraserburgh, and page 11 features a visit from Primary 7 pupils at St Andrews Primary School, giving them a first look at how a trailer is built. Finally, we recognise the dedication of our colleagues. Pages 19 to 21 mark 25 years of service for David Smith, Neil Ritchie and Keith Mackenzie. On pages 22 and 23, Ian Smith looks back on his career with Gray & Adams as he begins his retirement. Our retirement spotlights on pages 24 to 27 say thank you and farewell to Peter Foreman, Charles Reid, John Marshall, Alyn Falconer, John Whyte, Brian Cumming, Steve Hadfield, Rob Strachan and Jane Ramsay. Between them, they represent a remarkable contribution to this business. Our thanks go to our customers for their continued trust, and to our teams across Fraserburgh, Dunfermline, Belfast and Doncaster for the standard they set every day.

James Gray OBE and Peter Gray OBE Joint Managing Directors

PAGES 22-23

3


CS R

Opening Our Doors to Future Talent

Earlier this year, we welcomed applicants to our Fraserburgh site for our Recruitment Open Day, giving them the opportunity to see behind the scenes at Gray & Adams and learn more about the wide range of careers available across the business. Following the success of our apprentice Open Day in 2025, we expanded the event this year. Apprenticeship recruitment remained a key focus, but for the first time we also welcomed applicants who had applied for other vacancies across the business. Those attending were given a full tour of the site, taking them through the different stages of our manufacturing process and giving them visibility across all of our departments. This allowed applicants to see the full scale of our operations first-hand, understand how the different areas of the business come together to build our product and they also met some of the people behind the products we manufacture. For our apprenticeship applicants in particular, the tour provided a great introduction to the variety of trades and career pathways available. While some may have a set role or department in mind when they applied, this opportunity allowed them to experience the wider business and get a better understanding of where a career with Gray & Adams could potentially take them. The day also gave applicants the opportunity to speak with members of our team, ask questions and get a genuine feel for the working environment before progressing further through the recruitment process.

4

It was fantastic to see such a strong level of interest in joining Gray & Adams, and even better, to see a number of those who attended the Open Day subsequently join the business. A big thank you to everyone across the site who supported the event, welcomed our applicants and helped with the tours. Being able to open our doors and showcase the breadth of skills, departments and opportunities we have at Gray & Adams made the day a real success. Following the success of this year’s event, we look forward to building on this again next year, continuing to develop the Open Day as a key part of our annual recruitment activity and creating an opportunity for the next group of potential employees and apprentices to see where a career with Gray & Adams could take them.


C U S T OME R C A SE STUD Y CU

AK Stoddart — Two Decades of Purpose-Built Refrigerated Transport for Scotch Beef

Some partnerships are measured in orders, others in decades. Ours with Broxburn-based beef processor AK Stoddart began in 2001 and has continued for the last twenty-five years. Over that time we have built a fleet of trailers specifically to carry hanging beef from Stoddart's Ayrshire abattoir to its processing facility near Edinburgh and on to customers across the UK and Europe. The most recent, their 18th Gray & Adams trailer, arrived on site last month.

Customer Requirement AK Stoddart moves both palletised goods and hanging beef. One driver handles pallet deliveries while the other transports the beef, so the fleet has to cope with two very different types of load. Hanging beef is the more demanding of the two. It behaves differently in transit and places greater structural demands on a trailer than a standard refrigerated build, which means every trailer has to be built to carry it. The specification therefore has to be right first time, every time. The structure must be strong enough to carry the weight of hanging beef safely, while maintaining the temperature integrity that Stoddart's product depends on.

Gray & Adams Solution We build to Stoddart's specification, not to a catalogue. Each trailer is engineered around the loading system and structural requirements for transporting hanging beef, to a specification refined over two decades of successive orders. Because we hold that specification, every new trailer repeats a proven design.

Added Value When Stoddart's came to us for their most recent trailer Gray & Adams, Sales Manager, John Burnett already had the full specification on file. Nothing needed scoping or re-drawing. As Graeme Brown, Logistics Manager at AK Stoddart, put it, the process was very simple, the specification was ready, so the order went straight into build.

Customer Impact

Our Customer Says

"We've worked with Gray & Adams for more than 25 years, and in that time they've become part of how we operate. Our trailers have to be strong enough to carry hanging beef day in, day out, and Gray & Adams build them to exactly the spec we need. Ordering our 18th trailer was straightforward, John already had everything on file, so it was a simple process from start to finish. We've had a great relationship with Gray & Adams throughout the years and no reason at all to look elsewhere." – Graeme Brown, Logistics Manager, AK Stoddart What Gray & Adams Says

"Twenty-five years is a long time in any industry, and it says a lot about the working relationship we have with the team at Broxburn. Hanging beef is a demanding application and the specification has to be exactly right. We've built that spec together over many years, we can turn an order around without starting from scratch each time. It's a genuine pleasure to keep supporting a business that plays such an important role in Scottish food production." – John Burnett, Sales Manager, Gray & Adams

For a business processing up to 1,000 head of cattle a week and supplying customers across the UK and internationally, transport reliability is the mechanism by which product reaches customers in the condition it left the plant. Twenty-five years on, AK Stoddart keeps coming back to us because the equipment does the job. It is a partnership that has held up over two decades, and as the business grows we will keep building to the specification that supports it.

5


I NDU ST RY S P OTLIGH T

Celebrating 150 Years with Warburtons

We were delighted to join Warburtons in person as they marked their 150th milestone earlier this year at a celebratory event. Warburtons' 150th anniversary dinner was held at Manchester Cathedral, bringing together around 300 guests for an evening hosted by broadcaster Vernon Kay. The setting was a memorable one, and the atmosphere reflected the significance of the occasion. Gray & Adams took a table of ten, and we chose to use those places to say thank you. Alongside our own team we were joined by long-standing past and present industry friends and suppliers, including Gary Scrupps (U-Haul), John Robinson (James Hall & Co. / SPAR), and some of the team from BPW, all of whom have played a part in our story over the years. Being able to bring them together for an evening like this was a genuine pleasure. The relationship continues to move forward alongside the celebrations. Following the successful delivery of fifteen double-deck and five standard refrigerated trailers, Warburtons has now placed an order for a further twenty semi-trailers, a reflection of the confidence built between our businesses and of the continued growth of their distribution operation.

6

Reflecting on the anniversary, Jonathan Warburton commented:

"Reaching 150 years is a celebration of our people and partners. Long-standing relationships, such as the one we have with Gray & Adams, are an important part of our continued journey." James Gray, Managing Director of Gray & Adams, adds:

"It was a real privilege to be invited, and an evening our whole table thoroughly enjoyed. Milestones like this belong to Warburtons' people first and foremost, so being counted among the partners they wanted in the room meant a great deal to us. Our congratulations to everyone at Warburtons, we look forward to the next chapter." Our thanks to Warburtons for the invitation, and our congratulations once again on a remarkable 150 years.


CS R

St Andrews Primary Visit Gray & Adams Fraserburgh

Earlier this year, Gray & Adams was delighted to welcome Primary 7 pupils from St Andrews Primary School to our Fraserburgh site, giving the pupils a first-hand look at how the business designs, builds and delivers trailers used across the UK and beyond. The pupils were taken on a guided tour of the factory floor, seeing first-hand the skill and craftsmanship that goes into every build, from welding and fabrication through to the finishing touches that get a trailer road-ready. For many of the children, it was their first opportunity to see inside a working factory and understand the scale of manufacturing that takes place.

Pupils had the chance to ask questions throughout the visit and the class left with a better understanding of the journey a trailer takes to get to its finished product, and a few budding engineers may even have found their next ambition. Gray & Adams looks forward to continuing to support local schools and welcoming more young visitors to Fraserburgh in the future.

The visit forms part of Gray & Adams' ongoing commitment to engaging with young people in the communities where the business operates, helping to inspire the next generation and highlight the range of careers available in engineering and manufacturing.

"It was great to have the Primary 7 pupils visit us at Fraserburgh. Seeing their curiosity and enthusiasm as they explored the factory was fantastic, and it's important for us to show young people what a career in engineering and manufacturing could look like. Gray & Adams has supported the communities in which we work since 1957, and we're proud to keep building those connections for the future." – David Smith, Group Quality Manager, Gray & Adams

7


CU S T OME R C A SE STUD Y

Cress Co — A New Partnership Built on Quality

Cress Co was founded in 2003 by Joe Wall, starting out with a second-hand van and a small lock-up in Perth, Scotland. Over 23 years, the business has grown into a fleet of 130 vehicles with a turnover of £65 million last year. In 2023, Cress Co acquired fellow Scottish wholesaler Adamsons Drinks, now fully integrated into the business, and in 2024 launched a new venture, Route2 Haulage and Distribution. Cress Co supplies fine foods and drinks to farm shops and delis, with customers including Dobbies, and distributes soft drinks and confectionery brands such as Haribo and Coca-Cola through Adamsons. The business also holds contracts with customers including Baynes and local authorities such as Falkirk Council, supplying schools across the region. We were first introduced to Fleet Manager Lewis Conway, who joined Cress Co two years ago as a fleet administrator before progressing into his current role. Lewis placed Cress Co’s first Gray & Adams order for eight 14-tonne refrigerated vehicles, which was recently delivered and was followed by a further order for a fridge trailer. It marks the start of a new relationship for us, with Cress Co having previously worked with other body builders. With Cress Co's head office less than five miles from our Dunfermline site, the partnership has been supported closely by Sales Manager John Burnett, along with Derek, Graham and Chris. Beyond the convenience of location, we were glad to hear that Cress Co were drawn to our reputation for quality, and we're proud that from the very first conversation the process has been straightforward, we listened to what Cress Co wanted, developed a bespoke design around their needs, and worked through every request without hesitation. This specification was confirmed and the order was placed with more commencing in late 2025.

8

“Cress Co is exactly the kind of customer we love working with, a growing, familyrooted business that knows precisely what it needs from its fleet. From our very first conversation with Lewis, it was clear this was about far more than a standard refrigerated body, so we took the time to understand how Cress Co and Adamsons operate day to day and designed around that. Seeing the vehicles out on the road since March, performing exactly as intended, is what this job is all about. We're looking forward to building on this relationship as Cress Co continues to grow.” – John Burnett, Sales Manager, Gray & Adams Customer Requirement Cress Co's most recent order comprised eight 14-tonne refrigerated vehicles. While a laned body is a common specification, Cress Co needed something more, a door built into the centre bulkhead wall, allowing access to both compartments from a single side door on the nearside of the vehicle. This keeps the cold chain more tightly controlled during multi-drop deliveries, reducing the need to open both sides of the vehicle and limiting temperature loss. The vehicles were also fitted with air curtains to further support temperature control at the point of loading and unloading, and finished in a refreshed Cress Co livery, split between the Cress Co and Adamsons brands to reflect the breadth of the business.


Gray & Adams Solution We worked closely with Cress Co to develop a specification unique to their operation, rather than supplying an off-the-shelf refrigerated body. Our bespoke centre-door bulkhead design directly addresses Cress Co's need to protect the cold chain while serving multiple compartments efficiently on the road, and the addition of air curtains further reinforces temperature control across both sections of the vehicle. The livery split between the Cress Co and Adamsons brands reflects the fact that, since the 2023 acquisition, the two businesses now operate as one integrated fleet, and we were able to accommodate this dual-brand requirement as part of the wider build. Throughout the process, our team responded to every request raised by Cress Co, ensuring the finished vehicles matched the exact way their business operates. Added Value Since taking delivery, Cress Co has been able to maintain more accurate temperature control with fewer issues affecting product, a direct result of the bespoke bulkhead and air curtain specification. Build quality has also made a marked difference, Cress Co had previously experienced issues with another body builder that led to vehicle downtime, but our vehicles have been on the road since March without any significant technical issues. Lewis also highlighted the confidence that comes with working with us, knowing that if any issues do arise, we will respond quickly rather than leaving Cress Co without a vehicle on the road. It's this kind of relationship, built on responsiveness and quality, that we aim to deliver for every customer.

As Cress Co continues to grow, including planned expansion south of the border, we look forward to growing alongside the business and playing our part in supporting that next stage. Our Customer Says

“I couldn’t recommend Gray & Adams highly enough. We can maintain temperature control far more accurately now, with a lot fewer issues affecting our product, and the build quality speaks for itself. These vehicles have been on the road since March without any real technical issues, which hasn’t always been our experience with other body builders. It gives us real confidence knowing that if anything ever did come up, Gray & Adams would be there in a heartbeat rather than leaving us stuck. The whole experience has been great from day one, and as Cress Co keeps growing, I’ve no doubt our relationship with Gray & Adams will grow right alongside it.” – Lewis Conway, Fleet Manager, Cress Co

Customer Impact Looking ahead, we expect our relationship with Cress Co to go from strength to strength. Cress Co has already put forward initial specifications for further bodies, including some more unique builds, and intends to route all future volume for this type of vehicle through us.

9


CO M PA NY INSIGH TS

Beyond the Checkbox: How Passion, Precision, and Feedback Drive Our Promise to Deliver Quality

When you think of the word "quality," it's easy to picture spreadsheets, checklists, and compliance audits. But at its core, quality isn't just a metric or a certificate on the wall. It's a promise we make to our customers every single day. To keep that promise, it takes two things working hand-in-hand: strong leadership and an absolute focus on the customer. True leadership happens on the shop floor, in the offices, and at every single workstation across our sites. Whenever a team member double-checks a customer specification, flags a potential hazard, or suggests a better way to do a task, they are demonstrating leadership. It's about taking ownership of your workspace and setting the standard for those around you. When we lead by example, quality naturally follows. When a customer chooses our product, they are placing their trust in that promise. If our product or service falls short, the metric doesn't matter, the trust is broken. That is why true quality cannot exist without absolute customer focus. Our customers are the ultimate judges of our work, and their needs dictate not just what we make, but how we make it.

Our End-of-Line Quality Inspectors We utilise robust systems, standardise processes, and have clear metrics to build quality into every stage of our operations. However, processes alone do not guarantee perfection. The true backbone of our quality assurance relies entirely on the human element, and we rely heavily on our end-of-line quality inspectors, who are the last line of defence. These individuals are not simply ticking boxes on a clipboard. They inspect every detail with the mindset of the end-user, asking themselves,

"Would I be happy to receive this?" Their passion is what catches the tiny imperfections that machines and automated systems may miss. Because they take immense personal pride in their work, they ensure that nothing leaves our doors unless it meets our highest standard.

10

Turning Friction into Trust: Handling Complaints Despite our best efforts and the dedication of our inspectors, mistakes can occasionally slip through, or expectations may misalign. When a customer raises a complaint, we do not view it as a nuisance. We view it as a critical failure in our quality system and an urgent opportunity to rebuild trust and improve as a business.

When things go wrong, we rely on a strict, empathy-driven procedure to make things right: •

Immediate Acknowledgment We respond quickly to validate the customer's frustration. Silence breeds anger, so our priority is ensuring the customer knows they have been heard and that an owner has taken responsibility for their case.

•

Root Cause Investigation We trace the defect or issue back through our production and inspection lines. The goal is never to assign blame to an individual, but to find out how our system allowed the error to happen and to improve the process.

•

Direct Resolution We empower our customer service teams to provide immediate, tangible remedies, whether that is a replacement, a refund, or a dedicated fix, without trapping the customer in bureaucratic red tape.

The Continuous Loop: Learning from Feedback While complaints alert us to immediate breakdowns, everyday feedback, reviews, and suggestions are the compass that guides our long-term growth. Every piece of feedback we receive is categorised and reviewed by leadership. We don't just look for what is broken; we look for patterns in what our customers want.

David Smith, Group Quality Manager


CO M PA NY INSIGH TS

Driving Sustainability Forward: We've Reached a New Environmental Milestone

Gray & Adams Car and Commercial Repair Centre has been officially awarded the prestigious Accident Repair Industry Environmental Standard (ARIES), marking a major milestone in the business's commitment to sustainable operations. David Smith, Group Quality Manager, commented:

"We are incredibly proud to announce that Gray & Adams Car and Commercial Repair Centre has been officially awarded the prestigious Accident Repair Industry Environmental Standard (ARIES). This recognition is a major milestone for our team. It reflects our unwavering commitment to minimising our environmental impact while continuing to deliver the highest quality collision repair and refinishing services to our customers." What This Standard Means for You and the Environment Achieving this standard isn't just about receiving a certificate; it is the result of rigorous audits, strict compliance reviews, and a fundamental shift toward sustainable operational practices. The automotive repair industry traditionally involves energyintensive processes and complex chemical handling, making environmental stewardship a critical operational responsibility. By operating under this standard, we guarantee that every vehicle repaired at our centre is handled with the utmost respect for the local environment and the broader climate.

Here is how we are making a difference: Advanced Waste Management

Eco-Friendly Materials We prioritise the use of water-based paints and environmentally compliant refinishing products that drastically reduce Volatile Organic Compound (VOC) emissions without compromising on durability or finish quality. Continuous Improvement Environmental compliance is not a one-time event. We have embedded sustainable practices into our daily quality management and health and safety procedures, ensuring our team is continually trained and our processes are regularly reviewed. Darren Hanton, Car and Commercial Repair Manager, added:

"Earning the Accident Repair Industry Environmental Standard is a testament to the hard work of our entire team, from the workshop floor to our management and compliance staff. We are dedicated to leading the charge for greener operations within the automotive repair sector. When you trust Gray & Adams Car and Commercial Repair Centre with your vehicle, you can have complete confidence that your repairs are being completed to the highest safety specifications and the strictest environmental standards. Thank you for your continued support as we drive toward a more sustainable future." To learn more or to book a repair, contact the team today on 01346 586813 or visit www.gray-adams.com.

We have implemented strict protocols for the segregation, recycling, and safe disposal of all workshop waste, including hazardous materials, solvents, and damaged automotive parts.

Energy Efficiency Our facilities have been optimised to reduce overall energy consumption, utilising high-efficiency spray booths and smart lighting systems to lower our carbon footprint.

11


I NDU ST RY L EG END

Mark Sutcliffe With more than three decades in transport and logistics, Mark Sutcliffe has helped shape some of the most significant developments in temperature-controlled distribution. From managing depots in his early twenties to leading transport operations for major national businesses including The Big Food Group, Warburtons, Co-op and Marshall Fleet Solutions, his career has been defined by innovation, collaboration and a relentless pursuit of efficiency. Throughout much of that journey, Gray & Adams has been a trusted partner. Transport was always close to home.

“My dad was in the transport industry, I did a degree in logistics, gained my Class 1 licence and joined Brakes on their depot manager training programme in 1990. From day one, I was in temperature-controlled distribution.” Within just a few years, Mark was managing his own depot in Lancaster, gaining hands-on operational experience that would become the foundation of his career. A move to Cearns & Brown marked the beginning of his involvement with vehicle development and his first experience working with Gray & Adams. While his role at Brakes focused on depot management and delivery operations, Cearns & Brown gave him the opportunity to help develop new transport solutions as the business expanded further into chilled and frozen distribution. It was a shift that sparked a fascination with vehicle design and operational efficiency that would remain throughout his career. Reflecting on the biggest changes he has witnessed across the industry, Mark points first to efficiency.

The project demanded collaboration across every level of the operation, from engineers and designers through to warehouse teams, drivers and trainers. Mark even took the completed trailer for a test drive around Fraserburgh before it entered service.

“When you design something with Gray & Adams, you have a picture in your head of what it should look like. Every time I’ve seen the finished product, it’s been exactly as I imagined it. That level of understanding and execution is rare.” Another innovation that remains a career highlight dates back to his years at Cearns & Brown. Working alongside Gray & Adams and Thermo King, Mark helped develop a highly specialised double-deck trailer capable of carrying frozen, chilled and ambient products simultaneously, with temperature zones flexible enough to be configured according to operational requirements.

“At the time, the refrigeration technology needed for it only existed in the United States,” he explains. “The unit had to be specially imported, but once it was installed and integrated into the trailer, it worked brilliantly.”

“Whether it’s vehicle design, routing systems, double-deck trailers or aerodynamics, there’s been a huge focus on efficiency gains. At the same time, compliance standards have improved significantly, and environmental considerations have become a much bigger influence on vehicle design and fleet operations.”

The result was a highly efficient multi-temperature vehicle that reduced journeys and increased flexibility across the supply chain.

For Mark, sustainability has always been most effective when it aligns with operational improvements.

For Mark, these successes were only possible because of strong supplier relationships built on trust and collaboration.

“Reducing fuel consumption isn’t just good for the environment, it’s good for the business. The best solutions tend to deliver both.” One project that stands out in particular was helping introduce one of Gray & Adams’ first longer, heavier double-deck trailers for Warburtons as part of the Government’s trial programme. Bread is a relatively lightweight product, making increased trailer capacity a significant opportunity for efficiency gains.

“We knew the operational benefits were there, the challenge was how to build it. Gray & Adams listened to what we wanted to achieve, challenged our assumptions where necessary and worked with us to create a solution that would work in practice.”

12

“You put it into operation, and it did exactly what it was designed to do. That’s always satisfying.”

“It’s imperative, especially when you’re trying something new. There’s always a concern that it won’t work, or that people won’t accept it operationally. Gray & Adams take the time to understand how you work. They’ll stand on a loading bay at four o’clock in the morning if they need to. They challenge ideas, test assumptions and make sure the final solution actually delivers.” That commitment extends beyond the initial build.

“When the vehicle arrives, it’s exactly as you expected. Then they support the implementation, the training and any issues that arise afterwards. They stand by the product, regardless of its age, and that’s a huge part of their reputation.”


Looking back on vehicle developments that have had the greatest impact on fleet operations, Mark identifies three areas: multi-temperature vehicles, double-deck trailers and aerodynamic design. “Multi-temperature operation transformed distribution efficiency. Double-decks created huge operational benefits, and Gray & Adams have been at the forefront of that growth. Aerodynamics is another area where they’ve been willing to apply real science and engineering rather than simply follow marketing trends.” When discussing his proudest achievements, Mark points to his time at Warburtons,

“The journey we went on there was probably the most rewarding part of my career. We developed the distribution operation enormously, from telematics and compliance improvements through to fleet innovation. But none of it would have been possible without the people around me, both within the business and among trusted suppliers like Gray & Adams.” Today, Mark has moved into fleet risk and advisory work with AXA while remaining closely connected to the transport sector through Logistics UK and wider industry networks. The move has allowed him to apply decades of experience in a new way, helping operators improve safety, compliance and fleet performance.

“It’s given me an opportunity to work with the next generation and help them understand what works and what doesn’t. In many ways I’ve stepped outside the industry, but I’ve never really left it.”

“When I joined the industry at 22, I thought I knew everything. In reality, I knew very little. Now I fully appreciate that the food supply chain operates 24 hours a day, seven days a week, all year round. The people, equipment and businesses involved keep the country moving, and it’s an incredible thing to be part of.” His enduring relationship with Gray & Adams reflects many of the values that have shaped his own career. Mark recalls asking Andrew Brown early on how Gray & Adams differed from the competition. His answer was simple: “Ask them to show you a vehicle that’s ten years old and see what it looks like.” For Mark, that response perfectly captured the company’s philosophy, “They build products to last. The quality of the product, the quality of the people and the service they provide means you know exactly what you’re getting. They innovate, they deliver on their promises, and that’s why they’ve remained an industry benchmark for so long.” As for his own legacy, Mark hopes it centres on collaboration, innovation and integrity,

“I’d like people to say I worked collaboratively to develop new standards and solutions for the businesses I worked for. Most importantly, I want to be able to walk back into any company I’ve worked with and know I did the right thing. That matters more than anything else.”

Asked what advice he would offer to those entering transport and logistics today, his answer is simple,

“Don’t be afraid to challenge your suppliers. Build strong relationships based on trust and integrity. Most importantly, remember it’s a people industry. From drivers upwards, the people are the most important part of any operation.” Looking back over more than 35 years in the sector, Mark believes the greatest lesson has been gaining an appreciation for the complexity and importance of the food supply chain.

13


CO M PA NY SU C CESSES

Gray & Adams Showcases Trailer Innovation at Road Transport Expo 2026

Gray & Adams, a leading manufacturer of temperature-controlled and specialist vehicles, successfully exhibited at the Road Transport Expo (RTX) 2026, where the company welcomed operators, fleet managers and industry partners to explore its latest trailer innovations designed to support the evolving needs of modern distribution. Exhibiting from stand O15 throughout the three-day event, Gray & Adams showcased three distinct vehicle builds, each demonstrating the company's commitment to efficiency, sustainability and safety across both urban and long-haul transport operations. Among the vehicles on display was a Gray & Adams double-deck demonstrator trailer, highlighting the company's expertise in maximising load capacity while maintaining operational efficiency. Designed for high-volume distribution operations, the double-deck solution attracted significant interest from visitors looking to increase productivity by optimising payload per journey. Also featured was the Marks & Spencer specification rigid vehicle, built to the retailer's latest operational requirements and reflecting the long-standing partnership between the two organisations. The fully liveried vehicle showcased a range of advanced features designed to support efficient and sustainable multi-drop operations, including: •

A retractable tail lift for enhanced operational flexibility.

•

An electric transport refrigeration unit, supporting reduced emissions and quieter operation.

•

A suite of eco-friendly technologies aligned with sustainability goals.

•

Enhanced safety features, including cycle-safe sideguards and additional reversing lamps.

•

An air curtain system designed to maintain temperature integrity during frequent door openings in multi-drop delivery environments.

14

Completing the display was the Blakemore urban trailer, developed specifically for city distribution operations and demonstrating how vehicle design continues to evolve to meet the challenges associated with urban logistics.

Supporting the future of logistics The exhibition provided an opportunity for Gray & Adams to discuss the key challenges facing the transport and logistics sector, including improving operational efficiency, meeting sustainability targets and adapting to growing urban distribution demands. Throughout the event, the Gray & Adams team engaged with a wide range of customers and industry professionals, sharing insight into how tailored vehicle solutions can help operators improve performance while meeting increasingly demanding operational requirements.

Strong engagement at RTX 2026 RTX 2026 once again proved to be a valuable platform for connecting with the wider transport industry and showcasing the latest developments in temperature-controlled transport. Gray & Adams would like to thank everyone who visited the stand during the exhibition and looks forward to continuing conversations with customers and partners as the industry works towards a more efficient and sustainable future.


LO N G SERVIC E

David Smith | 25-Year Long Service Award

David Smith is celebrating his 25-year anniversary with Gray & Adams. He joined the company in 2001 after being personally invited by the late Jim Gray to visit the business and meet the leadership team. Following a full day of discussions with the directors, David was offered a position and began what would become a highly successful and influential career with the company.

Over the past 25 years, David has played a key role in the development and success of Gray & Adams' lifting deck trailers. As Group Electrical Manager, he is responsible for designing the hydraulic and electrical systems for lifting deck trailers, as well as supporting the development of new products and innovations introduced to the business. He also oversees tail lift operations and manages subcontract electrical teams on site.

When asked what he enjoys most about working for Gray & Adams, David highlighted the people and team spirit that exist throughout the organisation:

“Working with the rest of the staff. We have our ups and downs, but we all pull in the same direction in the end.” As David celebrates this remarkable milestone, Gray & Adams would like to thank him for his dedication, expertise and contribution over the last 25 years. His role in the success of the lifting deck trailers and his commitment to the business have made him a valued member of the Gray & Adams team, and we congratulate him on reaching this significant anniversary.

One of David's proudest achievements has been his contribution to the ongoing development of lifting deck trailers. When he first joined Gray & Adams, the company was producing around 20 lifting deck trailers each year. Through continuous development, innovation and refinement of the product, annual production has grown to approximately 450 trailers.

15


LO N G SERVIC E

Neil Ritchie | 25-Year Long Service Award

Neil Ritchie is celebrating his 25-year anniversary with Gray & Adams. Joining the company straight from school, Neil has built a long and successful career within the business and is now an Assistant Line Manager in the Brakes Department. Over the last quarter of a century, Neil has become a key member of the production team, working predominantly on the night shift for the past 10 to 15 years. In his current role, he helps oversee the installation and testing of brake systems, primarily on Gray & Adams' double-deck trailers, ensuring they are fully prepared before moving on to the assembly stage. Reflecting on his 25 years with the company, Neil jokes that the milestone represents

“a lot of airbags, chambers and tie wraps!” However, behind the humour lies a wealth of experience and knowledge gained through years of working with evolving trailer technologies and braking systems. Neil believes one of the reasons he has remained with Gray & Adams for so long is the constant opportunity to learn. Throughout his career, he has witnessed significant advancements in vehicle technology and has embraced the challenge of keeping up with new systems and innovations. He also credits the way he has been treated during his time with the company as a key factor in his long service. When asked about his biggest achievement at Gray & Adams, Neil answered,

“Definitely lasting so long on the night shift!”

16

Neil's dedication and commitment to working nights for over a decade has played an important role in supporting production and ensuring trailers are completed to the highest standards. Asked which role he would choose if he could do another job at Gray & Adams for a day, Neil was quick to answer,

“Probably a driver. Surely nobody can annoy me out there! I'd happily do the night shift driving.” When discussing what he enjoys most about working for Gray & Adams, Neil highlighted both the technical aspects of his role and the people around him.

“I genuinely enjoy my job. I like learning about new brake systems, TPMS, trackers and reversing systems. I suppose some of the people have been alright too!” As Neil celebrates this significant milestone, Gray & Adams would like to thank him for his dedication, hard work and contribution over the past 25 years. His commitment to learning, willingness to adapt to new technologies and many years of service on the night shift have made him a valued member of the team, and we congratulate him on reaching this remarkable anniversary.


LO N G SERVIC E

Keith Mackenzie | 25-Year Long Service Award

Keith Mackenzie is celebrating his 25-year anniversary with Gray & Adams. Joining the company straight from school, Keith has built a long and varied career within the business and is now a key member of the Brakes Department.

When asked about his biggest achievement at Gray & Adams, Keith kept his answer simple,

In his current role, Keith helps oversee the work carried out in the Brakes Department, making sure everything is completed properly before trailers move on to the next stage of production.

It is a modest response, but one that reflects the steady and dependable approach he brings to the team every day.

He also takes on touch-up paintwork and, in his own words gets involved in,

"a bit of everything." Gray & Adams has long been part of Keith's family. His father worked for the company and his brother still does, so when Keith left school, it felt natural to follow in their footsteps. He came along and was offered a job straight away. Keith's career with the company includes a short spell away. After his first ten years, he left for a year to Australia before deciding to return, and he has remained a dedicated part of the team ever since.

"keeping everyone happy and doing my job well."

For Keith, one of the most rewarding parts of working at Gray & Adams is spotting the company's trailers on the road. After years spent working across so many areas of the business, he knows the care and skill that go into every build. Seeing the finished product out and about is a reminder of the part he and his colleagues have played in it. That sense of pride runs through his 25 years with the company and reflects how much he values the work the team delivers. As Keith celebrates this significant milestone, Gray & Adams would like to thank him for his dedication, hard work and contribution over the past 25 years. His versatility, strong family connection to the business and commitment to doing the job well have made him a valued member of the team, and we congratulate him on reaching this remarkable anniversary.

Over the years, Keith has worked in many different areas of the business, building a broad understanding of how Gray & Adams trailers come together. When asked which role he would choose if he could do someone else's job for a day, Keith instead reflected on the many he has already held.

"I've been through quite a lot of jobs here, but my favourite of them all was mud wings. It's hard, but I'm used to it. I like the variety."

17


R E T I R E MENT SPO TLIGH T

Ian Smith Reflects on His Career with Gray & Adams

Is there another project that stands out?

After almost 14 years with Gray & Adams, Ian Smith retired at the end of July. He joined in 2011 as Deputy Engineering Manager and finished as Group Engineering Manager. We caught up with Ian to talk about his career, the changes he has seen and what he is doing now.

Working with Ian Farnworth at James Hall and looking at the infrastructure they would need to operate their trailers in an urban setting. It was about manoeuvrability in a confined space, and I was able to give them a potential solution to take forward.

How did you first come to Gray & Adams, and what were you doing before that?

Where do you think the next real step forward in refrigerated transport engineering will come from?

I was working for a bus company, First Group, as their technical manager for the UK, based out of Aberdeen. I bumped into the man who was Gray & Adams' Engineering Manager at the time at Manchester Airport, and he was looking for somebody to do type approval work. We had a conversation and it all came from there.

Trailers are going to have to become more environmentally friendly. The Government has CO2 targets to meet by 2030 and beyond, and it will be the manufacturer who gets fined if the reduction isn't delivered, not the customer. You have to be able to show a carbon reduction. I believe the simplest way to do this, without compromising on reliability or longevity, is through alternative power for the refrigeration unit, such as solar or regenerative energy axles. New technology will be central to that.

Talk me through the roles you held and how the Group Engineering Manager remit took shape. I came in as Deputy Engineering Manager, the job at the time was primarily around type approval, and the title changed to Technical Manager not long after that. Around 2017 the group were looking for a Group Engineering Manager. I prepared and submitted an application paper, which I'm pleased to say, was successful.

How much did the role change between your first year and your last? Immensely. The first year was all about legislation and dealing with the Vehicle Certification Agency and DVSA, so it was very much aligned to technical and legislative requirements. Early on in my time with Gray & Adams, when I was around 50 years old, I went back to college to study mechanical engineering, and after that the role shifted from the technical and legislative side into much more mechanical engineering and design. This meant proper engineering work, calculations, strength of materials, that sort of thing. When I later became the Group Engineering Manager it took on a managerial dimension as well, running the engineering office, which supports the whole group.

What is the single biggest change in how a Gray & Adams trailer is designed and built since you joined? Other than the legislative changes, there are two that come to mind. The first is electrical advancement, with better and more reliable componentry, particularly on double-decks. The second is the move to galvanised chassis, which gives you the longevity of the steel. A fleet operator would previously run a trailer for around 12 years. Operators wanted to move to 15 plus years, so as part of product advancement the chassis was developed further and became a galvanised structure. There have been many packaging challenges as environmental pressures changed in the industry, and solar capture and electric regeneration from axles came into the mix.

Which product or innovation are you proudest to have had a hand in? All of it, to be honest with you. I couldn't single anything out. It was being involved with the concepts behind the innovations that I enjoyed.

What was the hardest technical problem you had to solve? I wouldn't say it was the hardest, but probably the most memorable, Turners of Soham had bought new trailers for a new operation and were having problems with the rear underrun not integrating with their docking system at a new site. I went down to look and assess how we could best provide a solution. This required a redesign of the rear underrun, including the type approval which involved strength of material and bending moment calculations. It is still fitted to their trailers today and it is part of their specification now. Every time I see a Turners temperature-controlled trailer with that bumper on it, square and circle section material, I think, that's my bumper. The good part was working with the customer on site, with Kevin Rampley their fleet engineer, and being able to react quickly.

18

Which industry bodies did you sit on, and what did Gray & Adams get out of being in the room? I sat on the SMMT technical committee as chairperson for trailers and bodywork, and I have also sat on industry forums for the Institute of Road Transport Engineers and CLCCR, which is the European equivalent of the SMMT. So, both UK and European technical committees. It put Gray & Adams in the foreground of what was happening, and we were able to help shape the legislation. I handed the SMMT role over to John MacKinnon, so the company is still represented today.

Is there anything you have asked the engineering team to keep doing? Stay away from European whole vehicle type approval. It brings a lot of legislation into scope that becomes a considerable administrative burden on any manufacturing business. Staying out of it also keeps us away from things like VECTO, the vehicle energy consumption calculation tool. It wouldn't affect the customer, but it would be a burden on manufacturing.

What is your most memorable moment with the company? I was a candidate at the inaugural Ex-Forces in Business awards event in Scotland, held in Glasgow, and I won the Engineering Excellence award. Tom Taylor came up to the event with me. It was a proper regimental occasion, medals and all. To get that recognition for engineering excellence was a very proud moment.

What would you say is your biggest achievement? I left school (a long time ago), with a grade five in arithmetic, not mathematics. Being able to develop a great career in engineering, where mathematics is very important and becoming head of engineering at Gray & Adams, is my whole life’s biggest achievement which I am very proud of. If I had to attach something to it, it would be gaining Incorporated Engineer registration with the Engineering Council, which is the industry recognition at that level, along with the fellowships of the industry associations. It was hard going, holding down a full-time job and doing the extra tuition at the same time, but it was worth the investment of time and energy, and I only wish I had done it sooner. The message I would give people is this. Don't think you can't do it because of where you started. Look at me.

What advice would you give to someone starting at Gray & Adams today? Stick in, work hard and you can do anything. You just have to work hard to get it.


Would you encourage a young person to go into engineering in this industry? Most definitely. It isn't just what you see in front of you, it is the science behind what you do, and that is the lovely part of it. You aren't simply cutting a piece of steel and fitting it. You need to know how that steel works, how it reacts, and what it is good for. There is a lot more to it than meets the eye, so I would encourage any young person to follow a career in engineering and to stick with the STEM subjects. There are two young engineers in the engineering department at Fraserburgh now, including a graduate engineer apprenticeship, which is a brand new university scheme and this is really good to see. From my own experience, if someone wants to progress themselves, Gray & Adams will support them.

Before we finish, is there anything you would like to add? A sincere thanks to James and Peter for the opportunities they have given me over the time I worked at Gray & Adams. They have supported me throughout. I would also give acknowledgement to the great people I worked alongside in the Technical and Engineering Office, it’s a great team! Just as a point of note about my own career route. A lot of people come to Gray & Adams and have great long careers at Gray & Adams, my career however, looked nothing like that. I had always said I would never work for a bus company, and I would never work in a factory, and I ended up doing both. From being on the tools as a mechanic in the military, through the police and the Ministry of Transport and into manufacturing, it shows you can get there. Put in the hard work and you can do anything.

What are your plans for retirement? I have retired from Gray & Adams, but I haven't really retired. I have the opportunity now to pick and choose some work in a consultancy capacity, which gives me a very good balance between my hobbies and keeping my hand in with the industry. It would be a shame to see all the expertise built up over the years just stop. Outside of that I am continuing to support my son's motorcycle racing, doing my photography, and I bought a motorhome almost a year ago which I’ve already done 10,000 miles in, so I am definitely keeping busy.

19


R E T I RE MENT SPOTLIGH T

Peter Foreman Gray & Adams said goodbye to long-serving employee Peter Foreman. Working as Panel Manufacture Line Manager, Peter has worked for Gray & Adams for the last 22 years, retiring in July this year. We caught up with Peter just after his retirement to find out more about what he will miss about working for Gray & Adams and what he is looking forward to as he enters this new chapter.

What did you do before you came to Gray & Adams and why did you want to work for the company?

What was your role at Gray & Adams and what were your day-to-day responsibilities?

What was your biggest achievement while working for Gray & Adams?

Panel Manufacture Line Manager

I’ve had a variety of roles since leaving school. I started out in metalworking and welding, and I even spent some time working as a taxi driver. When I was ready for a new challenge, I came across Gray & Adams. The company appealed to me because of its strong reputation and the stability it offered, which made it an attractive place to build a long-term career.

I'd say my biggest achievement has been working my way up to being a line manager.

What did you enjoy most about working for Gray & Adams? The people have been a big part of what’s kept me here. I’ve worked with a great group of colleagues over the years, and that’s made the job really enjoyable. My department in particular has always had a strong team spirit and a supportive atmosphere.

What are your plans for retirement? I haven’t made any big plans for retirement yet. At the moment, it still feels like a bit of a novelty, so I’m looking forward to taking things a little easier and enjoying some time to relax. I’d like to spend more time with my family and, hopefully, get back to attending more Celtic games whenever I can.

James and Peter Gray would like to thank Peter for his commitment to the company and wish him all the best in his retirement going forward.

Charles Reid Gray & Adams said goodbye to long-serving employee Charles Reid. Working as an HGV Driver in Fraserburgh, Charles has worked for Gray & Adams for the last 16 years, retiring in June this year. We caught up with Charles just after his retirement to find out more about what he will miss about working for Gray & Adams and what he is looking forward to as he enters this new chapter. What was your role at Gray & Adams and what were your day-to-day responsibilities? As an HGV driver, my role was delivering new trailers.

What did you do before you came to Gray & Adams and why did you want to work for the company? I started out as an apprentice mechanic before moving into lorry driving. I've worked all over the UK throughout my career, while always being based in and around Fraserburgh. The only exception was the occasional Sunday and Monday working in London and the South of England. I've been driving lorries for my entire working life, which has given me plenty of experience on roads across the country and the chance to get to know all sorts of places along the way.

20

What was your biggest achievement while working for Gray & Adams? I'd say my biggest achievement has been keeping my head down, working hard, and doing my job well.

What did you enjoy most about working for Gray & Adams? The people. I've worked with a great bunch of people over the years, which has made the job enjoyable. I've also known James J Gray all my life, so it has always felt like a friendly and familiar place to work.

What are your plans for retirement? I’m looking forward to spending some time getting the garden looking nice and tidy, slowing down a bit and enjoying my retirement.

James and Peter Gray would like to thank Charles for his commitment to the company and wish him all the best in his retirement going forward. Since Charles took part in this interview, sadly his long-term partner Christina has passed away. The Directors and entire Gray & Adams team would like to pass on their condolences to Charles and his family.


R E T I R E MENT SPO TLIGH T

John Marshall Gray & Adams said goodbye to long-serving employee John Marshall. Working as a Car Body Shop Operative, John has worked for Gray & Adams for the last 50 years, retiring in July this year. We caught up with John just after his retirement to find out more about what he will miss about working for Gray & Adams and what he is looking forward to as he enters this new chapter. What was your role at Gray & Adams and what were your day-to-day responsibilities? I worked as a Car Body Shop Operative in the Accident Repair Facility before gradually moving into the commercial side of the department. My day-to-day responsibilities involved preparing, painting and finishing vehicles to a high standard, applying a wide range of company liveries and ensuring every vehicle left the workshop looking its best.

What did you enjoy most about working for Gray & Adams? The people. Over the years, I have had the pleasure of working alongside a lot of great colleagues who were always willing to help and support one another. The friendships and teamwork are something I will always remember.

What are your plans for retirement? At the moment, I am helping my wife with her dog-walking business, which keeps me active and gets me plenty of exercise. I also have a few jobs around the house to tackle, a couple of holidays planned, and then I'll see what the future brings.

James and Peter Gray would like to thank John for his commitment to the company and wish him all the best in his retirement going forward.

What did you do before you came to Gray & Adams and why did you want to work for the company? I joined Gray & Adams straight from school at the age of 16, beginning my apprenticeship in the Car Repair Shop. I had always been interested in cars and lorries, so it was a role that really suited my interests and gave me the opportunity to build a career doing something I enjoyed.

What was your biggest achievement while working for Gray & Adams? One of my proudest achievements was being involved in the planning of the new Accident Repair Facility. It was rewarding to play a part in developing a facility that would benefit the business for years to come.

Alyn Falconer Gray & Adams said goodbye to long-serving employee Alyn Falconer. Working as a Panel Manufacture Line Manager in Fraserburgh, Alyn has worked for Gray & Adams for the last 32 years, retiring in July this year. We caught up with Alyn just after his retirement to find out more about what he will miss about working for Gray & Adams and what he is looking forward to as he enters this new chapter. What was your role at Gray & Adams and what were your day-to-day responsibilities? As Panel Manufacture Line Manager, I was responsible for running the panel line in Fraserburgh. Day to day, that meant looking after the team, keeping production on track and making sure every panel was built to the right standard and ready on time for the next stage of the build.

What did you enjoy most about working for Gray & Adams? The people. I've worked with a great bunch of people over my 32 years, and they've made the job enjoyable. When you spend that long somewhere, the people you work alongside become a big part of your life.

What are your plans for retirement? First of all, I'm planning to put my feet up and relax. After 32 years, it'll take a bit of time to find my feet and work out what life looks like after retirement, but I'm looking forward to finding out.

James and Peter Gray would like to thank Alyn for his commitment to the company and wish him all the best in his retirement going forward.

What did you do before you came to Gray & Adams and why did you want to work for the company? Before Gray & Adams, I worked as a joiner in Edinburgh. When I decided to move back home, I started looking for work closer to Fraserburgh, and that's when I found Gray & Adams. Thirty-two years later, I'm glad I made the move.

What was your biggest achievement while working for Gray & Adams? My biggest achievement was being part of the development of the double-deck trailers. I saw them go from an early concept right through to the high standard they're built to today, and it's been rewarding to watch them become one of the products the company is known for.

21


R E T I R E MENT SPO TLIGH T

John Whyte Gray & Adams said goodbye to long-serving employee John Whyte. Working as a Line Manager for the Panel Prep Department (as well as Panel Trim and Glue departments during his career) John has worked for Gray & Adams for the last 26 years, retiring in July this year. We caught up with John just after his retirement to find out more about what he will miss about working for Gray & Adams and what he is looking forward to as he enters this new chapter. What was your role at Gray & Adams and what were your day-to-day responsibilities? As a Line Manager, I was responsible for the Panel Prep Department, the Glue Department and the Panel Trim Department. Day to day, that meant looking after the teams in each area, making sure the work was organised and keeping everything running smoothly so jobs were completed to the right standard and on time.

What did you enjoy most about working for Gray & Adams? The people. There's a great social side to working at Gray & Adams, and it's something I really missed when I was self-employed. Working on your own, you don't get that same sense of being part of a team. Having good people around you every day, and the chat and banter that comes with it, made the job enjoyable.

What are your plans for retirement? Golfing! I'm looking forward to getting out on the course as much as I can and finally having the time to enjoy it properly. It'll be nice to take things at my own pace and make the most of this next chapter.

James and Peter Gray would like to thank John for his commitment to the company and wish him all the best in his retirement.

What did you do before you came to Gray & Adams and why did you want to work for the company? Before joining Gray & Adams, I was a self-employed joiner. The work had me travelling back and forth across the North East, and after a while I got fed up with being on the road so much. I knew a few people who were already working at Gray & Adams and they spoke well of the place, so I decided it was time for a change and wanted to join the company. My background in joinery gave me a good grounding for the work, and I never looked back.

What was your biggest achievement while working for Gray & Adams? Over 26 years, I picked up a huge amount of knowledge, and being able to pass that on is what I'm proudest of. I spent a lot of time training younger workers, often over six to eight months at a time, helping them build their skills and confidence. Seeing them develop and go on to do well in the business has been very rewarding.

Brian Cumming What did you do before you came to Gray & Adams and why did you want to work for the company?

Gray & Adams recently said goodbye to long-serving employee Brian Cumming. Brian retired in June this year after accumulating an impressive 38 years of service with Gray & Adams across three separate periods of employment spanning from 1983 to 2026. We caught up with Brian just after his retirement to find out more about what he will miss about working for Gray & Adams and what he is looking forward to as he enters this new chapter.

Before joining Gray & Adams, I served my time as a mechanic at a local garage, where I gained experience working on a wide range of vehicles and equipment, including cars, vans, tractors and heavy plant machinery.

What was your role at Gray & Adams and what were your day-to-day responsibilities?

Working alongside the engineering team in the development of lifting deck trailers.

I first joined Gray & Adams in 1983, working in the Brakes Department when the team consisted of just four people. Over the years, I progressed through a number of roles within the company, including Manager of the Tail Lift Department, before finishing up my career this year as a Service Engineer.

What was your biggest achievement while working for Gray & Adams?

What did you enjoy most about working for Gray & Adams? Definitely the people.

What are your plans for retirement? My main priority is to complete my house-building project, which I’m looking forward to finally having more time to focus on. Once that’s finished, I plan to enjoy lots of holidays with family and friends.

James and Peter Gray would like to thank Brian for his commitment to the company and wish him all the best in his retirement going forward.

22


R E T I R E MENT SPO TLIGH T

Steve Hadfield Gray & Adams said goodbye to long-serving employee Steve Hadfield. Working in Stores Sales, Steve has worked for Gray & Adams, Doncaster, for the last 24 years, retiring in July this year. We caught up with Steve just after his retirement to find out more about what he will miss about working for Gray & Adams and what he is looking forward to as he enters this new chapter. What was your role at Gray & Adams and what were your day-to-day responsibilities? I started out in Stores before moving to the yard, where I was responsible for receiving deliveries and helping manage stock coming into the business. When I moved to part-time hours, working three days a week, I helped train the person who would take over my role in the yard. As the company needed someone to be based outside permanently, I moved indoors and joined the Sales team. From then on, my role involved wrapping parts, helping customers in Sales and assisting on the shop floor. Whenever things were quieter, I was always happy to help out wherever I was needed, supporting both the Sales and Stores teams.

What was your biggest achievement while working for Gray & Adams? For me, the biggest achievement was simply enjoying the work and the people I worked with. I've always enjoyed being part of the team and helping wherever I could.

What are your plans for retirement? Nothing too permanent just yet. I'm looking forward to getting a few jobs done around the house and then seeing what comes next. I'd like to join a few clubs, enjoy having some extra free time and take things as they come. I'm sure I'll be looking for my next challenge before too long.

James and Peter Gray would like to thank Steve for his commitment to the company and wish him all the best in his retirement going forward.

What did you do before you came to Gray & Adams and why did you want to work for the company? I started my career in a DIY store, where I worked for seven years. After that, I spent another seven years in a glass bulb factory, manufacturing the outer part of electric bulbs and tubes. Towards the end of my time there, I moved into the Stores department. When the business started to decline, I saw an advert for a Stores position at Gray & Adams. I applied, got the job and have been here ever since. Another reason Gray & Adams appealed to me was that a few people from my village already worked here, so I knew a little about the company before I joined.

Rob Strachan

Purchasing Department, 40 years

Jane Ramsay

Production Support Administrator, 25 years

James and Peter Gray would like to thank Rob and Jane for their many years of continued support and service to Gray & Adams, and wish them all the best in their retirement going forward.

23


Engineering excellence and innovation since 1957 FRASERBURGH

DUNFERMLINE

BELFAST

DONCASTER

GRAY-ADAMS.COM All content included within this newsletter is protected by copyright laws and owned by Gray & Adams.


Turn static files into dynamic content formats.

Create a flipbook
G&A_Autumn Newsletter 2026_Digital Version_V2 by Genoa Black - Issuu