Service GasKit Tools

AppLiAncE LEVEL

Automatically levels any surface in all directions (360°) at one time.

RMI Part No. Description GK-001 Appliance Level

dRiLLS

Sixteen (16) special length high speed drills cover definite orifice capacities.

RMI Part No. BTU/HR* D-45 48,659 D-47 44,604 D-48 41,839 D-50 35,480 D-52 29,214 D-53 25,619 D-54 21,933 D-55 19,537 D-56 16,548 D-59 12,164 D-62 10,450 D-65 8,865 D-68 6,957 D-70 5,627 D-72 4,524 D-80 1,317 *Measured @ 11" W.C.

FiLES

Files held in flip-out partition for quick & easy handling.Four files, each with specific functions.

GK-FF

GK-LF

GK-SF

© Ray Murray Inc. Edition 11 GK-HF

RMI Part No. Description

GK-FF Flat File - Cleans slotted standby pilots, burners& ribbon burners.

GK-LF Large Round File - Cleans ports on the following burners: star, top,oven broilers, water heater, space heater, etc.

GK-SF

Small Round File - Cleans ports on the following burners: star, top, oven broilers, water heater, space heater, etc. GK-HF Hook File - Cleans entrainment port on side of burner head.

SERVicEmAn’S KiT

A compact unit with features created to meet the demands of the “on the road” gas serviceman. Contains reamers, drills, midget wrench, files, orifice hole reducer kit, leveler, and miscellaneous tools as listed below.

Emergency method for shrinking oversize holes in an orifice quickly and accurately. The adjustable orifice reamer can ream, enlarge or measure orifices used on LP-Gas appliances, drill size #31 to #80. Includes 2 reducers: 1/16" and 5/32".

RMI Part No. Description

GK-100 Gas-Kit Serviceman's Kit

cOmBinATiOn midGET wREnch

B-1

A B C

Removes/Installs hood orifices. Set includes 20 tooth offset ratchet, 2 Phillips head screw slot drivers, 1 wrench head.

RMI Part No. Description

GK-140 Combination Midget Wrench Set

ORiFicE hOLE REdUcER KiT

ORF-1

RMI Part No. Description

ORF-1 Orifice Hole Reducer Kit

RMI Part No. Description

GK-140A CM-13 Ratchet Only GK-140B #1 Phillips Head Only GK-140B-1 #2 Phillips Head Only GK-140C Wrench Head Only

miScELLAnEOUS TOOLS & GAS cOcK GREASE

Specialty tools for the gas serviceman tool kit. Gas cock grease will not break down in hydrocarbon gases or temperatures up to 185°F.

INDIVIDUAL ITEMS ON THIS PAGE INCLUDED IN GK-100 KIT (EXCLUDING Y70AA-2C, GAS GREASE)

RMI Part No. Description

GK-003 Chip Brush - Loosens & removes chips in drilled hoods.

GK-010 GK-007

GK-007 Double Collet Pin Vise Holds drills, reamers and chip brush.

GK-003

Y70AA-2C

GK-010

S/S Slot Cleaner - Cleans slotted portions in burners & pilot heads. Y70AA-2CGas Cock Grease - 21/2" oz.* * This item not included in GK-100 kit.

REAmERS

Five cornered reamers–clean pilots, orifices, burners and parts. Permit true orifice reaming without drifting, plus burnished finish.

RMI Part No. Description

G-5000 Complete Reamer Kit: #20 #90 reamers w/ plastic case

RMI Part No. Description

RM-20 # 20 Reamer RM-30 # 30 Reamer RM-40 # 40 Reamer RM-50 # 50 Reamer RM-60 # 60 Reamer RM-70 # 70 Reamer RM-80 # 80 Reamer RM-90 # 90 Reamer