MPT Industries Products for Distributors

PRODUCT DATA SHEETS

MPT Industries P.O. Box 6181, West Caldwell, NJ 07007 Phone: 973-989-9220 • www.mptindustries.com © 2022 MPT Industries. All rights reserved.

MPT Defend Rust Inhibitor

Untreated Chain • Displaces Water and Bonds to Metal Surfaces for Long-lasting Protection Against Rust and Corrosion (can be removed with solvent) • Lasts for Months and Possibly Years Depending on The Environmental Conditions • Protects and Restores Life to Old Rusted Parts, Cables, Locks, Chains, Firearms, Garden Tools, Outdoor Equipment and More • Solvent Free and More Effective than Other Corrosion Inhibitors – Will Not Evaporate

MPT Industries P.O. Box 6181 West Caldwell, NJ 07007 Phone: 973-989-9220 www.mptindustries.com

Treated Chain

After 30 Days in Salt Fog Chamber

MPT Defend Rust Inhibitor MPT Defend Lubricant & Corrosion Inhibitor is a solvent free lubricant that adheres to metal parts to protect them against rust and corrosion. The proprietary formula works to bond to the applied metal surface to provide long-lasting protection in all types of moisture prone environments that will normally promote rust.

Under all types of weather conditions, including, salt water, fresh water, humidity, rain, snow, heat and cold, MPT Defend Lubricant & Corrosion Inhibitor stops rust in its tracks.

Unlike other rust inhibitors, MPT Defend Lubricant & Corrosion Inhibitor has a low odor and contains no solvents that can easily evaporate. Instead, the combination of special friction modifiers and rust inhibitors work to lubricate and protect the applied surface for months, and possibly years. Additionally, MPT Defend Lubricant & Corrosion Inhibitor works to penetrate existing rust and corrosion to restore life to neglected oxidized metal parts.

Typical Properties:

ASTM D445 – Viscosity @ 40° C, 143.3 cSt ASTM D445 – Viscosity @100° C, 29.4 cSt ASTM D2270 – Viscosity Index (VI), 246 ASTMD92 – Flash Point, 203° C ASTM D97 – Pour Point, 2° C ASTM B117 – Salt Spray (1,000 Hours), Pass Specific Gravity -- 0.88

Applications:

• Tools & Equipment • Locks/Cables/Chains • Firearms • Trailer Frames

MPT Industries P.O. Box 6181 West Caldwell, NJ 07007 Phone: 973-989-9220 www.mptindustries.com

• Vehicle Parts & Undercarriages • Castings/Stampings/Molds • Battery Terminals • Any Rust Prone Steel Parts

STOP FIRE FAST! MPT® Burnout™ is an easy-touse firefighting solution for portable handheld spray equipment. MPT Burnout is an environmentally friendly (contains no CFCs) proprietary concentrated formula that is mixed with water to extinguish fires quickly, safely, and effectively. Designed for use by homeowners, as well as police, military, firefighting, and emergency services professionals.

MPT Burnout can be mixed with water to extinguish Class A, B, D, and K fires in handheld extinguishers. It is not for use with Class C fires which involve electricity.

MPT Burnout provides these optimal properties: • Extinguishes Fires Quickly • Prevents Reignition • Rapidly Cools Surfaces, Including Hot Metal Surfaces • Reduces Smoke

• Non-Toxic Biodegradable Formula • Non-Hazardous, Contains no CFCs • Non-Corrosive • Water Soluble • Provides Easy Cleanup

MPT Burnout Concentrate is available in 4 oz. and 32 oz. bottles – to be mixed with water in handheld extinguishers. The concentrate is also available in 5 gallon pails and 55 gallon drums. Refillable stainless steel extinguishes are also available. For handy, portable use, try MPT Burnout disposable aerosol containers.

MPT Industries P.O. Box 6181, West Caldwell, NJ 07007 Phone: 973-989-9220 • www.mptindustries.com © 2022 MPT Industries. All rights reserved. MPT® and Burnout™ are registered trademarks of MPT Industries.

STOP FIRE FAST! MPT® Burnout™ Extinguishes Fires Quickly, Safely & Effectively.

The Non-Toxic Biodegradable Formula Is Non-Hazardous (contains no CFCs). Cools Hot Surfaces Rapidly, Including Hot Metal Surfaces!

MPT Burnout is available in disposable 14-ounce aerosol cans for use in the home, car, shop or office. Use it to extinguish Class A, B, D or K fires. Not for use with Class C fires which involve electricity.

MPT Burnout Special Ops is available in 18-ounce aerosol cans for use by Military, Law Enforcement, Fire & Rescue, and Emergency Services.

MPT Fire Repel’s proprietary formula helps prevent the spread of fires on Class A surfaces such as uniforms, upholstery, carpeting, wood and more. It is environmentally safe, effective, and easy to apply to any surface.

Please note: this product does not provide permanent protection.

Periodic reapplications may be required, especially after washing.

Additionally, MPT Fire Repel does not fireproof the applied surface.

Instead, it slows the rate of the flame.

MPT Fire Repel is available in 16-ounce spray bottles, 5-gallon pails, and 55 gallon drums.

MPT Industries P.O. Box 6181, West Caldwell, NJ 07007 Phone: 973-989-9220 • www.mptindustries.com © 2022 MPT Industries. All rights reserved. MPT® and Burnout™ are registered trademarks of MPT Industries.

Oxygen Compatible OC Three PTFE Paste Joint and Thread Sealer Solutions for critical and demanding applications where no flammability, compatibility with oxygen and resistance to aggressive chemicals are essential.

OC Three PTFE Paste Joint and Thread Sealer is an aqueous based PTFE formulation. It is a homogenous white paste that penetrates thread convolutions more effectively, and more safely, than PTFE tape. Tested, approved and certified by BAM for gaseous and liquid oxygen service. Use in extreme temperatures (-400º F to +500º F). Recommended for use in mid vacuum specifications to 10-3 Torr and in pressures up to 10,000 psi in fuel systems.

A superior PTFE thread sealant paste that contains these optimal properties: Water Soluble Anti-Galling Anti-Corrosive Anti-Seize Chemically Inert Non-Toxic Non-Flammable Non-Migrating Odorless OC Three is NSF registered for use in food processing facilities.

Easy to apply from its 4 oz. (113.4 gram) squeeze tube with extended nipple and resealing cap.

Also available in a 22.9 oz (650 gram) jar.

Use OC Three for applications involving acetylene, hydrogen, hydrogen peroxide, carbon dioxide, gasoline, diesel fuel, kerosene, propane, helium, oxygen (gaseous and liquid), and to seal valves in bottled gases.

Store OC Three in closed containers near room temperature.

Do not allow product to freeze prior to application.

OC Three is compatible with many aggressive chemicals including: Acetylene Helium Phosphoric Acid Aluminum Chloride Hydraulic Oils Potassium Perchlorate Ammonium nitrate Hydrogen Potassium Persulfate Ammonium Perchlorate Hydrogen Bromide Propane (liquid & gaseous) Antimony Trichloride Hydrogen Peroxide (all concentrations) Propylene Oxide Bromine Hydrogen Sulfide Silane Calcium Hypochlorite Hydriodic Acid Silicone Tetrachloride Carbon Dioxide Iodine Sodium Hypochlorite Chlorosilanes Muriatic Acid Sodium Perchlorate Chlorosulfonic Acid Nitric Acid Sulfur Dioxide Chromic Acid Nitrogen Oxides Sulfur Trioxide Diesel Fuel Oleum Sulfuric Acid Ethylene Oxygen (liquid & gaseous) Titanium Tetrachloride

MPT Industries P.O. Box 6181 West Caldwell, NJ 07007 Phone: 973-989-9220 www.mptindustries.com © 2022- MPT Industries. All rights reserved.

MPT® and OC® registered trademarks of MPT Industries.

NINE

Oxygen Compatible OC Five Paste and OC Seven & Nine Greases Solutions for critical and demanding applications where no flammability, compatibility with oxygen and resistance to aggressive chemicals are essential.

OC Five Paste and OC Seven & Nine Greases are blended formulations consisting of PTFE particles and PCTFE which produce superior products that are chemically inert and environmentally safe. OC products have been tested and certified by the German Federal Institute for Materials Testing (BAM) for gaseous and liquid oxygen service.

OC Five Paste and OC Seven & Nine Greases can be used in high vacuum 10-7 Torr applications or high pressure applications where exposure to corrosive gases or liquids will be probable. OC Nine Grease is a less viscous versions of OC Seven Grease with similar properties. OC products are superior sealants and lubricants designed for use in a wide range of vacuum and industrial applications. These off-white homogenous paste and grease formulations provide unique sealing and lubricating solutions as their properties remain unaltered over wide temperature ranges – from extremely low cryogenic temperatures to high heat applications exceeding 450º F.

OC Five, Seven, and Nine provide these optimal properties: Non-flammable Odorless Anti-galling Non-migrating Waterproof Anti-seize Non-toxic Anti-corrosive Dielectric

OC Five Paste (S2) and OC Seven & Nine Greases (H2) are registered for use in food processing facilities.

Cost effective for liquid oxygen, liquid nitrogen, cryogenic and vacuum applications to prevent and reduce component and equipment failures, maintenance, and downtime.

Use OC Five Paste to seal threaded connections involving aggressive chemicals, industrial gases, medical devices, chlorine systems, cryogenics, nuclear applications, and more. OC Seven and OC Nine Greases are recommended for lubricating O-rings, valves, bearings, pumps, stopcocks, and more.

Available in 2 oz. (57 gram) and 16 oz. (454 gram) jars with resealable lid, as well as 7 oz. syringes for ease of use and storage.

Not recommended for aluminum against aluminum applications. Do not use with concentrated alkalis, fluorine (liquid) or chlorine trifluoride (liquid).

OC Five Paste and OC Seven & Nine Greases are compatible with many aggressive chemicals including: Acetylene Chromic Acid Oleum Aluminum Chloride Ethylene Oxygen (liquid & gaseous) Ammonium Hydroxide Fluorine (gaseous) Phosphoric Acid Ammonium Nitrate Fuming Nitric Oxide Potassium Perchlorate Ammonium Perchlorate Helium Potassium Persulfate Anhydrous Ammonia Hydrogen Propane Antimony Trichloride Hydrogen Bromide Propylene Oxide Boron Trichloride Hydrogen Fluoride Silane MPT Industries Boron Trifluoride Hydrogen Peroxide (all concentrations) Silicone Tetrachloride P.O. Box 6181 Bromine Hydrogen Sulfide Sodium West Caldwell, NJ 07007 Bromine Trifluoride (gaseous) Hydriodic Acid Sodium Hydroxide (all concentrations) Phone: 973-989-9220 Calcium Hypochlorite Iodine Sulfur Trioxide Carbon Dioxide Muriatic Acid Sulfuric Acid www.mptindustries.com Chlorine Trifluoride (gaseous) Nitric Acid Titanium Tetrachloride © 2022- MPT Industries. All rights reserved.

Chlorosilanes Nitrogen Oxides Uranium Hexafluoride MPT® and OC® registered trademarks Chlorosulfonic Acid Nitrogen Trifluoride of MPT Industries.

MULTI-PURPOSE SILICONE / PTFE

High-Performance Lubricant / Sealant A synthetic lubricant/sealant designed to exceed the most demanding conditions, specifications and uses in aerospace, automotive, agricultural, chemical, industrial, offshore and vacuum applications.

A superior blend of dimethyl silicone and PTFE providing these outstanding benefits: Extremely High Film Strength / Extremely Low Volatility / High Dielectric Strength / Waterproof and Chemically Resistant / Excellent Low Torque Characteristics / Non-toxic / Exceptional Physical and Thermal Stability / Wide Temperature Range Physical Properties Evaporation Loss Water Washout Dielectric Strength

Standards ASTM D-972 ASTM D-1264 ASTM D-149

Dielectric Constant

ASTM D-150

Vapor Pressure

ASTM D-2879

Mechanical Properties Penetration

ASTM D-217

Dropping Point Low Temperature Torque

ASTM D-2265 ASTM D-1478

Thermal Properties Max. Service Temp., Air Min. Service Temp., Air

Recommended Recommended

Tests / Results 22 hrs @100°C / .04% 1 hr @38°C / .15% 50% R.H. @50 mil gap / 21.36 kV average Breakdown voltage / 427 volts/mil @1,000 Hz / 2.596 @10,000 Hz / 2.592 Isoteniscope @21.11°C / 0.05 mm Hg Unworked, P(O), 1/10 mm / 260 Worked, 60 strokes / 259 >308°C @-40°C Starting Torque / 312 g-cm 10 Minute Running Torque / 176 g-cm 1 Hour Running Torque / 130 g-cm 600°F -50°F

Use MPT Silicone/PTFE High-Performance Lubricant/Sealant to extend lubrication intervals, provide longer equipment life, reduce labor time during maintenance activities and improve mechanical efficiencies. Packaged in convenient 8 oz. tube, 22 oz. cartridge and 2 oz. and 16 oz. jars.

Please call for industrial bulk packaging.

SATISFACTION GUARANTEED. Post Office Box 6181 West Caldwell, NJ 07007-6181 Phone: 973.989.9220 / Fax: 973.989.9234 www.mptindustries.com

MPT Silicone/PTFE High-Performance Lubricant/Sealant offers a money back guarantee with proof of purchase (empty container and purchase receipt required). Visit us on the web at www.mptindustries.com for details. © 2007 - MPT Industries. All rights reserved. MPT® is a registered trademark of MPT Industries, West Caldwell, NJ.

MULTI-PURPOSE MOLYBDENUM/PTFE

MPT® Twelve Lubricant and Penetrant Ideal for hundreds of uses – around the house or the office, in the workshop and garage, even outdoors!

MPT Twelve is the longest lasting lubricant and penetrant available. It protects against rain, snow, ice, heat, humidity, dust and salt-spray to prevent rust and binding, as its special molybdenum/PTFE (polytetrafluoroethylene) formula penetrates, cleans and lubricates, leaving a long-lasting protective film. MPT Twelve is stable over a wide range of temperatures (-60º to +500º Fahrenheit).

MPT Twelve – Concentrated Formula Multi-Purpose Molybdenum/PTFE Lubricant and Penetrant Penetrating formula with rust inhibitors • Stops binding, sticking and squeaking • Cleans and protects Use MPT Twelve Concentrated Formula in critical applications where service failures are not acceptable. MPT Twelve is compatible with oils and greases, and can be applied to precision bearings; nuts and bolts; indoor and outdoor locks, latches and hinges; power tools; small motors; computers and printers; lawn mower, snowblower, bicycle and motorcycle cables; etc.

MPT Twelve Concentrated Formula is available in a 1/2 ounce oiler with snub nose tip (on left - part number MPT-12), 1/4 ounce oiler with needle tip for precise application in hard to reach areas (above - part number MPT-11), a four ounce bottle with drip dispenser tip (on back - part number MPT-16) and a quart refill bottle (not shown - part number MPT-15).

MPT Twelve – Pump Spray Formula Multi-Purpose Molybdenum/PTFE Lubricant and Penetrant Environmentally-friendly pump spray bottle • Cleans and protects • Penetrating formula with rust inhibitors • Stops binding, sticking and squeaking Use MPT Twelve Pump Spray Formula for larger area applications where precision delivery is not required.

MPT Twelve is compatible with oils and greases and can be applied to roller guides, sliding door tracks, cogs, pulleys, bicycle and motorcycle chains, etc.

Specially formulated for easy dispersal, MPT Twelve Pump Spray Formula (at right - part number MPT-13) is available in a special four ounce pump spray bottle that is convenient and easy to use.

Also available in a quart refill bottle (not shown - part number MPT -14).

SATISFACTION GUARANTEED. MPT Twelve offers a money back guarantee with proof of purchase (empty container and purchase receipt required). Visit us on the web at www.mptindustries.com for details.

MPT® Twelve Concentrate Lubricant & Penetrant Test Results • When compared with other lubricant and penetrant products, MPT Twelve provides the longest-lasting protection available.

• Formulated with the finest ester and PAO synthetic base stocks, molybdenum, PTFE and special rust/corrosion inhibitors to provide outstanding protection that reduces friction and wear.

• Highly concentrated – contains no solvents or propellants. Locks and hinges, for example, require only a few drops for long-lasting protection.

• Prevents binding and freezing over a wide temperature range – from -60º to 500º Fahrenheit.

• Penetrates deeply to free rusted bolts and help resist corrosion.

ASTM D-2714, Block on Ring Friction & Wear Test Tests the wear preventative properties of a lubricant and its ability to reduce friction. The lower the coefficient of friction, the less force needed to move the parts.

Test Results: Coefficient of Friction of 0.193 @ 5000 Revolutions Ring Weight Loss, 0.4 mg Block Weight Loss, 0.1 mg Average Wear Scar, 1.079 mm PSI Load, 14.118 Peak Friction, 0.397

ASTM D-972, Evaporation Loss (500 hour @ 85º C), 1.33% loss ASTM D-455, Viscosity Index, 183 Kinematic Viscosity @ 100º F (cST), 51.34 Kinematic Viscosity @ 212º F (cST), 9.859

ASTM D-92, Flash Point, 380º F ASTM D-97, Pour Point, -49º F

Post Office Box 6181 West Caldwell, NJ 07007-6181 Phone: 973.989.9220 / Fax: 973.989.9234 www.mptindustries.com

© 2010 - MPT Industries. All rights reserved. MPT® is a registered trademark of MPT Industries, West Caldwell, NJ.

MPT® Cooler All -season automotive cooling system additive

MPT Cooler removes hot spots or air pockets to decrease coolant temperatures up to 20ºF. Can be used with or without antifreeze in 3-5 gallon systems. Compatible with all types of antifreeze including Dex-Cool and long-life products. Improves heat transfer in ethylene and propylene glycol systems while reducing cylinder head temperature and providing corrosion protection.

Safe for use in all cooling systems including cast iron, aluminum, bronze, and copper. Will not lower temperature below thermostat setting. Biodegradable, non-toxic and pH neutral.

• Removes hot spots caused by air pockets or bubbles, while reducing scaling.

• Provides rust and corrosion protection – meets requirements of ASTM D2570 and ASTM D1384 corrosion tests.

• Safely add to antifreeze (including DEX-COOL and long life products) or add to water alone – ideal for race cars.

• Extends engine life by reducing cylinder head temperature and maintaining the optimal temperature range more quickly.

• Biodegradable formula is non-toxic and environmentally friendly.

• Improves fuel mileage and performance while increasing air conditioning efficiency.

• Safe for use with all types of radiators, hoses, accessories and components.

• Will not reduce cooling system temperature below the thermostat setting.

Dosage: Add one bottle per 12-20 quart cooling system. Systems approaching the 20 quart level or greater may require a second bottle.

Post Office Box 6181 West Caldwell, NJ 07007-6181 Phone: 973.989.9220 / Fax: 973.989.9234 www.mptindustries.com Made in the USA

© 2017 MPT Industries. All rights reserved. MPT® is a registered trademark of MPT Industries.