Furnware Group - Cabinet Lighting 2019

Cabinet Lighting 2019

498

I

Lighting Solutions Flexyled CR Collection

Spotlights Collection

Flexyled CH Collection

X-Sign

Flexyled PW Collection

Pixel collection

Flexyled SE H4

X-Driver

Profile Collection

Sensor Switches

Page 500

Page 532

Page 508

Page 544

Page 516

Page 546

Page 520

Page 548

Page 524

Model

12Vdc

Page 552

Features

Connection System

The 12Vdc LED luminaires must be supplied with constant voltage and with a parallel electric circuit to any of the slots of the Micro12 distributor wired to the output of the power supply. The 12Vdc is the most widely distributed power LED converter on the market.

The 24Vdc LED luminaires must be supplied with constant voltage and with a parallel electric circuit to any of the slots of the Micro24 distributor wired to the output of the power supply. The 24Vdc supply makes possible to develop devices with a higher level of power and thus with performance greater than standard.

The 350mA devices should be supplied with constant current and connected in series to one of the slots of the BUS distributor wired to the output of the power supply. The free slots should always be closed with cable bridges. The 350mA power supply is an ideal solution for the development of high-power LED devices, in particular small-sized spots.

499

Lighting Solutions Flexyled CR Collection

Flexyled CR - Continuous Row

Flexyled HE CR FLEXYLED HE CR is a LED strip with a linear high lighting 120 LEDs/metre static lighting source which eliminates the dotted effect. Developed with an innovative quick connection system, it enables the multiple connection of modules of different lengths. All modules (50cm, 100cm, 200cm and 300cm) can be split every 5cm.

Flexyled CR FLEXYLED CR is a LED strip with a 60 LEDs/metre- static light source available in four lengths (50cm, 100cm, 200cm and 300cm) for multiple installation up to a maximum length of 6m.

Flexyled RGB CR FLEXYLED RGB CR is an RGB (red, green and blue) dynamic light flexible LED strip. Provided with multipole micro-connectors for continuous row installation, the modules come in four lengths (15cm, 30cm, 60cm and 180cm) all of which can be split each 7.5cm.

500

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

The FLEXYLED CR collection is developed with an innovative quick connection system that enables the continuous row connection of modules of different lengths, maintaining the distance between the LEDs and ensuring light projection uniformity without shadow areas at the joining points. The CR collection is easy to split and this enables obtaining development on customised lengths without additional complications such as soldering the wire to the LED strip which also comes equipped with quick coupling connector

I

Lighting Solutions Flexyled CR Collection

Continuous Row Installation The CR connectors integrated in the strip enables continuous row connection of modules of different lengths maintaining the distance between the LEDs and ensuring light projection uniformity without shadow areas at the joining points.

FLEXYLED HE CR and FLEXYLED CR come in four lengths (500mm, 1000mm, 2000mm, 3000mm for FLEXYLED HE CR) (250mm, 500mm, 1000mm, 2000mm for FLEXYLED CR) for continuous row installation up to a maximum of 6m.

FLEXYLED RGB CR comes in four lengths (15cm, 30cm, 60cm and 180cm) for multiple installation up to a maximum of 5m.

FLEXYLED HE CR - 120 LED/METRO

FLEXYLED CR - 60 LED/METRO

FLEXYLED RGB CR_MULTICOLOUR

Modularity The CR collection is easy to split and this enables obtaining development on customised lengths without additional complications such as soldering the wire to the LED strip which also comes equipped with connector and quick coupling.

FLEXYLED HE CR and FLEXYLED CR are easy to split every 5cm.

FLEXYLED RGB CR is developed on 7.5cm modules with 3 pairs of LEDs each (40 LEDs/metre approximately).

IP44 Protection The UV resistant resin protects each LED strip against mild mechanical shocks and against water sprays (protection IP44).

The high transparency and the base of the circuit painted in high reflective white enable a professional lighting performance of the equipment.

High Adhesion 3M© The 3M© high sealing adhesive guarantees perfect adherence on numerous surfaces (wood, metal, plastic, glass, etc.).

Wiring The 2-metre long power supply cable and interconnection wires that ensure electrical continuity come with polarised connectors.

Ordering online is now even easier! www.furnwaregroup.com.au

501

Lighting Solutions Flexyled CR Collection

Colour appearance

warm white

Colour temperature

3400 Kelvin

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

Colour appearance

natural white

Colour temperature

4500 Kelvin

24Vdc

Luminous efficiency

85 lm/W

120

CRI

Ra ≥ 80

* values referred to FLEXYLED HE CR 1000mm

KEY FEATURES Power Power supply LED/metre

9,6W/m

Divisibility

5 cm (6 LED)

Protection

IP44

Adhesive 3M©

yes * values referred to FLEXYLED HE CR 1000mm

Flexyled HE CR Modules

Part No.

Light Colour

L mm

LED’s (Watt)

DFXCR24.HE.500.WW

Warm White

500

60 (4.80W)

DFXCR24.HE.1000.WW

Warm White

1000

120 (9.6W)

Warm White

2000

240 (19.2W)

Warm White

3000

360 (28.8W)

DFXCR24.HE.500.NW

Natural White

500

60 (4.80W)

8

DFXCR24.HE.2000.WW DFXCR24.HE.3000.WW

4

502

L

Furnware Group • Talk to the experts on 1300 222 600

DFXCR24.HE.1000.NW

Natural White

1000

120 (9.6W)

DFXCR24.HE.2000.NW

Natural White

2000

240 (19.2W)

DFXCR24.HE.3000.NW

Natural White

3000

360 (28.8W)

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• Made in Italy •• Can be cut to lengths of 50mm increments. Once cut, further modules cannot be added •• Maximum 6 lineal metres in one run •• A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules - see next page •• LED strip only. Power supply cable and LED driver must be ordered separately - see next page •• Compatible with X-driver 24v range (see page 548)

I

Lighting Solutions Flexyled CR Collection

Flexyled HE CR Corner Modules •• Made in Italy •• Ensures consistent LED spacing at corners •• Suitable for 90° corners in the horizontal plane •• Compatible with the Flexyled CR Modules (page 502) •• LED strip only. Power supply cable and LED driver must be ordered separately - see below •• Available Left Hand or Right Hand Description

Light Colour

DFXCR24.HE.CNRR.WW

Right Hand

Warm White

DFXCR24.HE.CNRL.WW

Left Hand

Warm White

DFXCR24.HE.CNRR.NW

Right Hand

Natural White

DFXCR24.HE.CNRL.NW

Left Hand

Natural White

L

R

60

60

60

60

Part No.

Flexyled HE CR - Cables •• Interconnecting cable connects between 2 lengths of Flexyled CR Strip •• Power supply cable connects power from LED driver to Flexyled Strip •• 1 Power supply cable required for each run of Flexyled Strip •• A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules Part No.

Description

L mm

A

DFXCR24.HE.IC500

Interconnecting Cable

500

B

DFXCR24.HE.PSC

Power Supply Cable

2000

A

B

24V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro24 distributor block connected Part No.

Wattage

Max Strip Length

DSNP15.24

15W

1.5m

DSNP30.24

30W

3m

DSNP75.24

75W

7.5m

Hassle free ordering! Email us on info@furnwaregroup.com.au

503

Lighting Solutions Flexyled CR Collection

Colour appearance

warm white

Colour temperature

3400 Kelvin

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

Colour appearance

natural white

Colour temperature

4500 Kelvin

12Vdc

Luminous efficiency

85 lm/W

60

CRI

Ra ≥ 80

* values referred to FLEXYLED CR 1000mm

KEY FEATURES Power Power supply LED/metre

4,8W/m

Divisibility

5 cm (6 LED)

Protection

IP44

Adhesive 3M©

yes * values referred to FLEXYLED CR 1000mm

Flexyled CR Modules

504

Furnware Group • Talk to the experts on 1300 222 600

Part No.

Light Colour

L mm

LED’s (Watt)

DFLEXCR.250.WW

Warm White

250

15 (1.20W)

DFLEXCR.500.WW

Warm White

500

30 (2.40W)

DFLEXCR.1000.WW

Warm White

1000

60 (4.80W)

DFLEXCR.2000.WW

Warm White

2000

120 (9.6W)

DFLEXCR.250.NW

Natural White

250

15 (1.20W)

DFLEXCR.500.NW

Natural White

500

30 (2.40W)

DFLEXCR.1000.NW

Natural White

1000

60 (4.80W)

DFLEXCR.2000.NW

Natural White

2000

120 (9.6W)

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• Made in Italy •• Can be cut to lengths of 50mm increments. Once cut, further modules cannot be added •• Maximum 6 lineal metres in one run •• A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules - see next page •• LED strip only. Power supply cable and LED driver must be ordered separately - see next page •• Compatible with X-driver 12V range - see page 548

I

Lighting Solutions Flexyled CR Collection

Flexyled CR Corner Modules •• Made in Italy •• 6 LEDs. Ensures consistent LED spacing at corners •• Suitable for 90° corners in the horizontal plane •• 12 Volt 0.48W •• Compatible with the Flexyled CR Modules (page 504) •• LED strip only. Power supply cable and LED driver must be ordered separately - see below •• Available Left Hand or Right Hand Part No.

Description

Light Colour

DFLEXCR.CNR.R.WW

Right Hand

Warm White

DFLEXCR.CNR.L.WW

Left Hand

Warm White

DFLEXCR.CNR.R.NW

Right Hand

Natural White

DFLEXCR.CNR.L.NW

Left Hand

Natural White

Right Hand pictured

Direction of power

Direction of power

Power supply end

Power supply end

Flexyled CR - Cables •• Interconnecting cable connects between 2 lengths of Flexyled CR Strip •• Power supply cable connects power from LED driver to Flexyled Strip •• 1 Power supply cable required for each run of Flexyled Strip •• A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED CR modules A Part No.

Description

L mm

A

DFLEXCR.IC.250

Interconnecting Cable

250

A

DFLEXCR.IC.500

Interconnecting Cable

500

A

DFLEXCR.IC.1000

Interconnecting Cable

1000

B

DFLEXCR.PS

Power Supply Cable

2000

B

12V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro12 distributor block connected Part No.

Wattage

Max Strip Length

DSNP15.12

15W

3m

DSNP30.12

30W

6m

DSNP75.12

75W

15m

Join us on social media! @FurnwareGroup

505

Lighting Solutions Flexyled CR Collection

KEY FEATURES Power

8W/m

Power supply

12Vdc

LED/metre

RGB (red, green, blue)

Wavelength

R _ 622nm G _ 523nm B _ 467nm

40 RGB

Luminous efficien

Divisibility

7,5 cm (3 RGB LED)

Protection

IP44

Adhesive 3M©

Colour appearance

20 lm/W

yes FLEXYLED RGB CR is an RGB (red, green, blue) LED strip that enables adjusting the colour of the light.

Flexyled RGB CR Modules •• Made in Italy •• Can be cut to lengths of 75mm increments •• Maximum 5 lineal metres in one run •• A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED RGB CR modules see next page •• LED module strip only. Power supply cable and LED driver must be ordered separately - see next page Part No.

L mm

LEDs (Watt)

DFLEXCR.150.RGB

150

6 (1.2W)

DFLEXCR.300.RGB

300

12 (2.4W)

DFLEXCR.600.RGB

600

24 (4.5W)

DFLEXCR.1800.RGB

1800

72 (12W)

•• Made in Italy •• 3 LEDs. Keeps LED spacing consistent at corners •• Suitable for 90° corners in the horizontal plane.

•• 12 Volt 0.6W •• Compatible with the Flexyled RGB CR Modules (above) •• LED module strip only. Power supply cable and LED driver must be ordered separately - see next page •• Available Left Hand or Right Hand

Right Hand pictured

Direction of power Power supply end

506

Direction of power Power supply end

Furnware Group • Talk to the experts on 1300 222 600

Part No.

Description

DFLEXCR.CNR.R.RGB

Right Hand

DFLEXCR.CNR.L.RGB

Left Hand

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Flexyled RGB CR Corners

I

Lighting Solutions Flexyled CR Collection

Flexyled RGB CR Magic Colour I2V Control Unit •• Made in Italy •• Sequencer and remote control unit for control of the Flexyled RGB CR •• Remote range of up to 15M •• Max 30W per control unit (3.75m of strip) Can be set up as a ‘master and slave’ system to allow multiple controllers to be used in a larger system •• Remote requires 3V battery - CR2032 (Supplied) •• On/off, speed, colour and brightness functions •• Requires a LED Driver - see below Part No. DFLEXCR.SEQ.RGB

Flexyled RGB CR Cables •• Interconnecting cable connects between 2 lengths of Flexyled RGB CR Module •• Power supply connects power from Flexyled RGB CR Sequencer to Flexyled RGB CR Modules •• 1 Power supply cable required for each run of Flexyled RGB CR Strip •• A separate power supply cable MUST be ordered for every unbroken run of FLEXYLED RGB CR modules Part No.

Description

L mm

A

DFLEXCR.IC.100.RGB

Interconnecting Cable

100

A

DFLEXCR.IC.500.RGB

Interconnecting Cable

500

B

DFLEXCR.PS.RGB

Power Supply Cable

2000

A

B

12V DC LED Drivers •• C-Tick & AS Approved •• Supplied with 2 metre lead and plug •• Supplied with 12 MiniPlug Socket distributor block connected Part No.

Wattage

Max Strip Length

DSNP15.12

15W

3m

DSNP30.12

30W

6m

DSNP75.12

75W

15m

Ordering online is now even easier! www.furnwaregroup.com.au

507

Lighting Solutions Flexyled CH Collection

CH connector

Flexyled CH - chained Provided with an innovative Plug&Play wiring system, the FLEXYLED CH collection enables obtaining customised lengths without requiring complex wire soldering operations. The FLEXYLED CH models come in 5m and 20m-long rolls (FLEXYLED CH and FLEXYLED HE CH) or 6m-long rolls (FLEXYLED RGB CH). A special connector enables the multiple connection of FLEXYLED CH up to a maximum length of 6m.

FLEXYLED HE CH 2.0 is available in length 5 m and 20 m rolls. The new CH 2.0 connection system, just 12 mm in depth, is used to integrate the strip led in different profiles of the Domus Line collection. The innovative Plug&Play wiring system is used to create custom lengths without the need for complicated wire soldering. FLEXYLED HE CH 2.0 is a 120 LEDs/ metre-strip which comes in 5 and 20 metre rolls, that can be split every 5cm. Recommended for indirect lighting in home furnishing, for setting up sales areas, exhibition areas and applications in which the actual length is not known in advance.

Flexyled CH Provided with an innovative Plug&Play wiring system which enables obtaining customised lengths without requiring complex soldering of the wires, FLEXYLED CH is a 60 LEDs/ metre-strip which comes in 5 and 20-metre rolls, that can be split each 5cm. Just like the entire FLEXYLED collection, FLEXYLED CH can be integrated in many Domus Line profiles which can also be cut to size depending on the single installation.

Flexyled RGB CH FLEXYLED RGB CH is an RGB (red, green and blue) dynamic light LED strip that comes in 6-metre rolls with an innovative wiring Plug&Play wiring system, which enables obtaining customised lengths without requiring complex wire soldering operations.

FLEXYLED RGB CH can be controlled through remote adjustment systems and integrated in some of the Domus Line profiles.

508

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Flexyled HE CH 2.0

I

Lighting Solutions Flexyled CH Collection

Roll FLEXYLED CH comes in 5m and 20m-long rolls (FLEXYLED CH and FLEXYLED HE CH 2.0) or 6m-long rolls (FLEXYLED RGB CH). The LED strips can be split every 5cm (15cm for the FLEXYLED RGB CH version).

This enables using just the strictly necessary amount without wasting any module. Even the remainder can be re-utilised thanks to the availability of the connector for continuous row connection.

Continuous Row Installation A special connector enables the continuous row connection of FLEXYLED CH up to a maximum length of 6m. The small dimensions of this accessory guarantee a uniform and shadow-free light emission.

FLEXYLED HE CH 2.0 - 120 LED / M

FLEXYLED CH - 60 LED / M

FLEXYLED RGB CH

FLEXYLED CH CONNECTOR

FLEXYLED RGB CH CONNECTOR

Example of configuration of 6 meters FLEXYLED CH and 30W LED converter

FLEXYLED HE CH 2.0 and FLEXYLED CH guarantee optimal performance for continuous row installations up to a maximum of 6m.

Example of configuration of 12 meters FLEXYLED CH and 60W LED converter

Plug & Play System The CH collection is provided with an innovative Plug&Play wiring system which enables obtaining customised lengths without requiring complex wire soldering operations.

Electrical Circuit with Pre-Soldered Pads Contrary to many competitor products, FLEXYLED CH comes with all pads presoldered hence guaranteeing electrical contact with the connectors and the perfect operation of the LED strip.

Hassle free ordering! Email us on info@furnwaregroup.com.au

509

Lighting Solutions Flexyled CH Collection

*

KEY FEATURES

*

Power

9,6W/m

Power supply

24Vdc

LED/metre

Colour appearance

natural white

Colour temperature

4300 Kelvin

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

Colour appearance

warm white

Colour temperature

3100 Kelvin

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

120

Divisibility

5 cm (6 LED)

Protection

IP20

Adhesive 3M©

yes * values referred to FLEXYLED HE CH 2.0 1000mm

Flexyled HE CH 2.0 Rolls

Part No.

Light Colour

Roll Length

DFXCH24.HE.05M.WW

Warm White

5m

DFXCH24.HE.05M.NW

Natural White

5m

DFXCH24.HE.20M.WW

Warm White

20m

DFXCH24.HE.20M.NW

Natural White

20m

L

Flexyled HE CH 2.0 - Connecting Clip •• Connects 2 lengths of FLEXYLED HE CH 2.0 Strip •• Ensure correct polarity is observed

Part No. 12

510

Furnware Group • Talk to the experts on 1300 222 600

DFXCH24.HE.CCL

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• Made in Italy •• Can be cut every 50mm (6 LEDs) •• Maximum 6 metres in one strip length •• LED strip only. Use FLEXYLED HE CH 2.0 clips for connections •• 1 Power supply cable required for each run of FLEXYLED HE CH 2.0 Strip

I

Lighting Solutions Flexyled CH Collection

Flexyled HE CH 2.0 - Interconnecting Cable •• Connects 2 lengths of FLEXYLED HE CH 2.0 Strip via a wire to allow for corners, gaps etc.

•• Ensure correct polarity is observed 12 Part No.

L mm

DFXCH24.HE.IC100

100

Flexyled HE CH 2.0 - Power Supply Cable •• Connects power from LED driver to FLEXYLED HE CH 2.0Strip •• 1 Power supply cable required for each run of FLEXYLED HE CH 2.0 Strip

Part No.

L mm

DFXCH24.HE.PSC

2000

12

24V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro24 distributor block connected Part No.

Wattage

Max Strip Length

DSNP15.24

15W

1.5m

DSNP30.24

30W

3m

DSNP75.24

75W

7.5m

Join us on social media! @FurnwareGroup

511

Lighting Solutions Flexyled CH Collection

Colour appearance

warm white

Colour temperature

3100 Kelvin

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

Colour appearance

natural white

Colour temperature

4300 Kelvin

12Vdc

Luminous efficiency

85 lm/W

60

CRI

Ra ≥ 80

* values referred to FLEXYLED CH 1000mm

KEY FEATURES Power Power supply LED/metre

4,8W/m

Divisibility

5 cm (3 LED)

Protection

IP20

Adhesive 3M©

yes * values referred to FLEXYLED CH 1000mm

Flexyled CH - Rolls

Part No.

Light Colour

Roll Length

DFLEX.05B.WW

Warm White

5 metres

DFLEX.05B.NW

Natural White

5 metres

DFLEX.20B.WW

Warm White

20 metres

DFLEX.20B.NW

Natural White

20 metres

Flexyled CH - Connecting Clip •• Connects 2 lengths of FLEXYLED CH Strip •• Ensure correct polarity is observed and adhered to Part No. DFLEXCH.CC

512

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• Can be cut every 50mm (3 LEDs) •• Maximum 6 metres in one strip length •• LED strip only. Use FLEXYLED CH clips for connections

I

Lighting Solutions Flexyled CH Collection

Flexyled CH - Interconnecting Cable •• Connects 2 lengths of FLEXYLED CH Strip via a wire to allow for corners, gaps etc.

•• Ensure correct polarity is observed and adhered to Part No.

L mm

DFLEXCH.IC.50

50

DFLEXCH.IC.100

100

DFLEXCH.IC.2000

2000

L

Flexyled CH - Power Supply Cable •• Connects power from LED driver to FLEXYLED CH Strip •• 1 Power supply cable required for each run of FLEXYLED CH Strip (maximum length of FLEXYLED CH Strip is 6m) Part No. DFLEXCH.PS

12V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro 12 distributor block connected Part No.

Wattage

Max Strip Length

DSNP15.12

15W

3m

DSNP30.12

30W

6m

DSNP75.12

75W

15m

Ordering online is now even easier! www.furnwaregroup.com.au

513

Lighting Solutions Flexyled CH Collection

KEY FEATURES Power Power supply LED/metre

9,6W/m

RGB (red, green, blue)

Wavelength

R _ 622nm G _ 523nm

24Vdc

B _ 467nm

40

Luminous efficien

Divisibility

15 cm (6 RGB LED)

Protection

IP20

Adhesive 3M©

Colour appearance

20 lm/W

yes FLEXYLED RGB CH is an RGB (red, green, blue) LED strip that enables adjusting the colour of the light.

Flexyled RGB CH - Roll

Part No.

Roll Length

DFXCH24.6000.RGB

6m

Flexyled RGB CH - Connecting Clip & Interconnecting Cable A

•• Connecting Clip connects 2 lengths of FLEXYLED CH RGB Strip •• Interconnecting Cable connects 2 lengths of FLEXYLED RGB CH Strip via a wire.

•• Interconnecting Cable allows for corners, gaps etc.

•• Ensure correct polarity is observed and adhered to

B

514

Furnware Group • Talk to the experts on 1300 222 600

Part No.

Description

A

DFXCH24.CCL.RGB

Connecting Clip

B

DFXCH24.IC500.RGB

Interconnecting Cable

L mm

500

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• Can be cut every 150mm (6 LEDs) •• Maximum 6 metres in one strip length •• LED strip only. Use FLEXYLED RGB CH clips for connections

I

Lighting Solutions Flexyled CH Collection

Flexyled RGB CH Magic Colour 24V Control Unit •• Made in Italy •• Sequencer and remote control unit for control of the Flexyled RGB CH •• Remote range of up to 15M •• Max 60W per control unit (6m of strip) Can be set up as a ‘master and slave’ system to allow multiple controllers to be used in a larger system •• Remote requires 3V battery - CR2032 (Supplied) •• On/off, speed, colour and brightness functions •• Requires a LED Driver - see below Part No. DFXCH24.SEQ.RGB

Flexyled RGB CH - Power Supply Cable •• Connects power from LED driver to FLEXYLED RGB CH Strip •• 1 Power supply cable required for each run of FLEXYLED RGB CH Strip (maximum length of FLEXYLED RGB CH Strip is 6m) •• 2 metre long cable with Micro 24 and RGB CH clips connectors Part No. DFXCH24.PSC.RGB

14

24V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro24 distributor block connected Part No.

Wattage

Max Strip Length

DSNP15.24

15W

1.5m

DSNP30.24

30W

3m

DSNP75.24

75W

7.5m

Hassle free ordering! Email us on info@furnwaregroup.com.au

515

Lighting Solutions Flexyled PW Collection

Flexyled PW - Pre-Wired

Flexyled SHE6 PW FLEXYLED SHE6 PW is a 180 LEDs/m LED strip on a circuit measuring just 6mm wide. Developed to be integrated into small profiles (APEX for example), it comes in a 3m length equipped with a power supply cable and connector (pre-wired). The module is designed with the reinforced power supply cable soldering pads which guarantee appropriate solidity. FLEXYLED SHE6 PW comes with high density light emitting diodes which eliminate the dotted effect. The LED strip has a balanced power supply and appropriate heat dissipation which enables integrating it in profiles without dissipaters.

Flexyled UHE PW FLEXYLED UHE PW is a 240 LEDs/m LED strip on a 10 mm wide circuit with adhesive base. Developed to be installed in profiles with removable diffuser screen, it comes in 100cm, 200cm and 300cm modules equipped with a power supply cable and connector (pre-wired).

516

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

The FLEXYLED PW (pre-wired) collection features high intensity modules whose length varies between 100 cm and 300 cm, provided with supply cable, ready for installation without requiring complex soldering operations. Available with variable linear density of the LEDs, from a minimum 180 LEDs/metre up to 240 LEDs/metre, the models are configured on a circuit measuring from a min. 6mm to a max.

10mm in width. Models SHE6 is specifically designed to be inserted “slidably” in small profiles (such as APEX for example).

I

Lighting Solutions Flexyled PW Collection

Pre-Wired The FLEXYLED PW (pre-wired) collection features modules whose length varies between 100cm and 300cm, provided with supply cable, ready for installation without requiring complex soldering operations. Available with linear density of the LEDs, from a minimum 180 LEDs/metre up to 240 LEDs/metre, the models are configured on circuits measuring from a min. 6mm to a max.

10mm in width. Model SHE6 was specifically designed to be inserted into small profiles (such as APEX for example).

3M© Adhesive All FLEXYLED PW models (except SHE6), provided with the 3M© high sealing adhesive base, are designed to be installed in profiles with removable diffuser screens. The fact that the wire is pre-soldered does not increase overall dimensions with respect to the width of the LED strip and thus being more versatile with respect to the CH configurations.

High Performance All FLEXYLED PW models offer high lighting, colour consistency and colour rendering index above Ra80. When integrated in profiles provided with opal diffuser screens, the models with high linear density (from 180 and 240 LEDs/ metre) enable eliminating the typical dotted effect of light emitting diodes.

Join us on social media! @FurnwareGroup

517

Lighting Solutions Flexyled PW Collection

Colour appearance

warm white

Colour temperature

3100 Kelvin

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

14,4W/m

Colour appearance

natural white

24Vdc

Colour temperature

4200 Kelvin

180

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

KEY FEATURES Power Power supply LED/metre Divisibility

3,3 cm (6 LED)

Protection

IP20

Adhesive 3M© Cable Connector

no 200cm * values referred to FLEXYLED SHE6 PW 1000mm

Micro24

Flexyled SHE6 PW •• Can be cut every 33mm (6 LEDs) •• Maximum 6 metres in one strip length •• Designed to slide into Apex profile - see page 526 Light Colour

L mm

DFXPW24.SHE6.3000.NW

Natural White

3000

DFXPW24.SHE6.3000.WW

Warm White

3000

FLEXYLED SHE6 PW can be slid into the APEX profile. For details see page 526

24V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro24 distributor block connected

518

Furnware Group • Talk to the experts on 1300 222 600

Part No.

Wattage

Max Strip Length

DSNP15.24

15W

1m

DSNP30.24

30W

2m

DSNP75.24

75W

5m

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

L

Part No.

I

Lighting Solutions Flexyled PW Collection

Colour appearance

warm white

Colour temperature

3100 Kelvin

Luminous efficiency

70 lm/W

CRI

Ra ≥ 80

Colour appearance

natural white

Colour temperature

4200 Kelvin

Luminous efficiency

70 lm/W

CRI

Ra ≥ 80

KEY FEATURES Power Power supply LED/metre

22W/m 24Vdc 240

Divisibility

2,5 cm (6 LED)

Protection

IP20

Adhesive 3M© Cable Connector

yes 200cm * values referred to FLEXYLED UHE PW 1000mm

Micro24

Flexyled UHE PW •• Can be cut every 25mm (6 LEDs) •• Maximum 6 metres in one strip length Part No.

Light Colour

L mm

DFXPW24.UHE.1000.NW

Natural White

1000

DFXPW24.UHE.1000.WW

Warm White

1000

DFXPW24.UHE.2000.NW

Natural White

2000

DFXPW24.UHE.2000.WW

Warm White

2000

DFXPW24.UHE.3000.NW

Natural White

3000

DFXPW24.UHE.3000.WW

Warm White

3000

L

24V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro24 distributor block connected Part No.

Wattage

Max Strip Length

DSNP30.24

30W

1.3m

DSNP75.24

75W

3.3m

Ordering online is now even easier! www.furnwaregroup.com.au

519

Lighting Solutions Flexyled SE H4

Flexyled SE H4 - Side Emitting

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

The side emitting flexible linear collection is developed with a new technology for extrusion of emitting silicone materials that enables the installation of the LED strip directly into substrates. The soft silicone profile can be installed into the substrate simply by pressing into a 4mm wide groove. Ideal for installation on the sides of wardrobes, in the edge of benchtops, in solid surface materials or wherever your design ideas can conceive.

520

Furnware Group • Talk to the experts on 1300 222 600

I

Lighting Solutions Flexyled SE H4

Side Emitting At Domus Line, we ceaselessly strive towards developing quality LED strips.

With FLEXYLED SE H4, the FLEXYLED range of products grows by adding a Side-Emitting flexible linear collection.

Developed with a new diffusing silicone material extrusion technology, this LED strip was specifically conceived for recessed installation.

No-Dot Effect The SE H4 configuration comes with nodot effect technology, which guarantees homogeneous and no-dot-effect light emission. Besides offering high lighting performance, ideal for installation on the sides of wardrobes, FLEXYLED SE H4 is also efficient in other applications that require integrating a minimal lighting system.

Pressure Installation Neither adhesives nor glue are required for the installation of the SE H4 collection in that the soft silicone profile can be simply pressed into a 4mm groove. Ideal for installation on the sides of wardrobes or where adjustable shelving is used.

Hassle free ordering! Email us on info@furnwaregroup.com.au

521

Lighting Solutions Flexyled SE H4

KEY FEATURES Power Power supply LED/metre

11W/m 12Vdc

2,5 cm (3 LED)

Protection

IP44

Cable Connector

natural white

Colour temperature

4000 K

Luminous efficiency

70 lm/W

CRI

Ra ≥ 80

120

Divisibility

Adhesive 3M©

Colour appearance

no

* values referring to FLEXYLED SE H4 1000mm

15cm + 200cm Micro12

Flexyled SE H4

Part No.

Light Colour

L mm

LED’s (Watt)

DFXPW12.SEH4.1000.NW

Natural White

1000

120 (12W)

DFXPW12.SEH4.2000.NW

Natural White

2000

240 (22W)

DFXPW12.SEH4.3000.NW

Natural White

3000

360 (30W)

10mm The standard configuration of FLEXYLED SE H4 comes with a 150mm power supply cable at both ends of the strip equipped with a Micro12 connector and 2m extension.

522

Furnware Group • Talk to the experts on 1300 222 600

4mm

Neither adhesives nor glue are required for FLEXYLED SE H4, because the soft silicone profile can be installed simply by pressing in the milled groove.

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• Made in Italy to comply with Australian Standards •• Recessed installation in 4mm wide / 10mm deep groove •• Can be cut to lengths of 25mm increments (every 3 LEDs).

Once cut, further modules cannot be added •• IP44 protected •• Maximum 3 lineal metres in one run •• No separate power supply cable required •• LED strip only. LED driver must be ordered separately see next page •• Both ends of strip have power supply cable attached to allow strip to be cut and reused.

I

Lighting Solutions Flexyled SE H4

Extension Cable - Micro 12 •• Use for extending cable between LED Driver distribution block, and the light fitting •• This cable should be kept to the minimum length possible Part No.

L mm

DEXT12.1000

1000

DEXT12.2000

2000

12V DC LED Drivers •• C-Tick & AS Approved •• Supplied with 2 metre lead and plug •• Supplied with 12 MiniPlug Socket distributor block connected Part No.

Wattage

Max Strip Length

DSNP15.12

15W

1.2m

DSNP30.12

30W

3m

DSNP75.12

75W

6.5m

Join us on social media! @FurnwareGroup

523

Lighting Solutions Profile Collection

Profiles for Flexyled

Aluminium or polycarbonate extruded profiles designed for standard or flushed installation. Ideal for lighting wardrobes, walk-in closets, shelves, kitchen under cabinets. Each profile comes as a 2 or 3 metre bar with relative accessories.

Surface Mount Extruded aluminium profiles designed for surface mount applications with direct installation on the surface.

They are quickly and accurately installed using steel clips concealable at the rear of the profile, or by pressure. Each profile comes as a 3 metre bar with relative accessories.

Architectural Profile conceived to perfectly fit in the furnishing system, as a structural element for the piece of furniture, with a specific function, and as lighting device. They also come as bars and equipped with installation accessories.

524

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Recessed

I

Lighting Solutions Profile Collection

Recessed Profiles

APEX

MISS

DIVA

ICY

LEDYE

STRING

Surface Mount Profiles

TWIG

Architectural Profiles

SKYLINE

GOCCIA

TOUCAN

Ordering online is now even easier! www.furnwaregroup.com.au

525

Lighting Solutions Profile Collection

Apex Profile •• Made in Italy •• Supplied in 3 metre lengths only •• Recessed profile with integrated diffuser only.

•• Light source must be orderd separately.

•• Recommended LED strip Flexyled SHE6 PW - see page 518 •• Can be a stand alone profile or can also be inserted into Miss Profile (below) when an Aluminium profile is desired.

•• Can be easily cut to length •• Finish: Translucent (TR)

A

B

Part No.

Description

A

DAP.3M.TR

Translucent Profile 3 metres

B

DAP.EC.TR

End cap (set of 4)

0,8 - 1 mm

0,4 - 0,6 mm

11mm

11mm

9mm

9mm

•• Made in Italy •• Miss Profile is an aluminium channel only. Miss is supplied with the Apex Profile which presses neatly into the Miss extrusion.

•• Supplied in 3 metre lengths only •• Can be easily cut to length •• Finish: Aluminium (ALU), Matt Black (MBL)

A

B 526

Furnware Group • Talk to the experts on 1300 222 600

Part No.

Finish

Description

A

DPK.MISS.3M

ALU, MBL

Profile 3 metres

B

DMP.EC

ALU, MBL

End cap

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Miss Profile

I

Lighting Solutions Profile Collection

Icy Profile •• Made in Italy •• Recessed type profile only (light source must be ordered separately) •• Supplied in 3 metre lengths only •• Can be easily cut to length •• Opaline PMMA diffuser with matching end caps •• Innovative spring clip fastening system •• Any of the FLEXYLED range can be used as a light source. All strip modules, corners and connectors fit within the profile •• Finish: Aluminium (ALU) Part No.

Finish

Description

A

DPK.ICY.3M

-

Profile & Diffuser 3 metre

B

DIC.EC

TR

End cap (set of 2)

C

DIL.MC

-

Spring clips (Pack of 2)

ICY profile is equipped with a smart fitting system using a steel clip with lateral pressure. This allows the profile to be installed quickly with no need for glue. The system also means the profile can easily be removed from the milled groove if necessary.

Ledye Profile •• Made in Italy •• Recessed type profile only (light source must be ordered separately) •• Supplied in 3 metre lengths only •• Can be easily cut to length •• Opaline diffuser screen for symmetrical light projection •• Innovative spring clip fastening system •• Any of the FLEXYLED range can be used as a light source. All strip modules, corners and connectors fit within the profile •• Finish: Aluminium (ALU) Part No.

Finish Description

A

DPK.LEDYE.3M

-

Profile & Diffuser 3 metre

B

DLY.EC

GY

End cap (set of 2)

C

DIL.MC

-

Spring clips (Pack of 2)

LEDYE profile is equipped with a smart fitting system using a steel clip with lateral pressure. This allows the profile to be installed quickly with no need for glue. The system also means the profile can easily be removed from the milled groove if necessary.

Hassle free ordering! Email us on info@furnwaregroup.com.au

527

Lighting Solutions Profile Collection

Diva Profile •• Made in Italy •• Recessed type profile only (light source must be ordered separately) •• Supplied in 3 metre lengths only •• Can be easily cut to length •• FLEXYLED CR can be used as a light source. Strip modules, corners and connectors all fit within the profile •• Finish: Aluminium (ALU) Part No. DPK.DIVA.3M DDP.EC

Finish GY

Description Profile & Diffuser 3 metres End cap

DIVA is installed via recessed mounting, into a slot with a depth of 12mm and a width of 14.5mm. The front edges protrude slightly to cleverly conceal the edges of the recess, giving a clean finish.

Stopped groove installation

Through groove installation

•• Made in Italy •• Recessed type Diffuser profile only (light source must be ordered separately) •• Supplied in 3 metre lengths only •• Can be easily cut to length •• Suitable light source can be adhered to the Aluminium backing strip and then clipped into the diffuser. Diffuser profile can then be pushed into the pre-cut groove •• FLEXYLED CR can be used as a light source.

Strip modules, corners and connectors all fit within the profile •• Spring clips allow for very flexible installation grooves •• Finish: Aluminium (ALU)

STRING is flush installed in through milled grooves that are only 11mm deep and 12-18mm wide. The milled projection profile of only 0.8mm, allows it to be installed without further machining, even on the sides of cabinets and hanging kitchen cupboards fitted with shelves.

Part No.

Description

DPK.STRING.3M

Diffuser & Backing Plate 3 metres

DST.MC

Spring clips (Pack of 2)

Reccessed Installation

528

9.5

9

18.4

Flush Installation with spring clips

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

String Profile

I

Lighting Solutions Profile Collection

Twig Profile •• Made in Italy •• Surface Mount type profile only (light source must be ordered separately) •• Supplied in 3 metre lengths only •• Can be easily cut to length •• FLEXYLED CR can be used as a light source.

Strip modules, corners and connectors all fit within the profile •• Finish: Aluminium (ALU) Part No.

Finish

Description

DPK.TWIG.3M

-

Profile & Diffuser 3 metres

DTP.EC

GY

End cap

DTP.MC

-

Fixing Clip (Pack of 2)

TWIG is installed on the supporting surface with the help of concealed clips.

Surface mounted installation

Toucan Profile •• Made in Italy •• ABS Plastic profile only (light source must be ordered separately) •• Suits 6 - 8mm glass shelves •• Supplied in 2 metre lengths only •• Can be easily cut to length •• FLEXYLED CR can be used as a light source. Strip modules, corners and connectors all fit within the profile •• Finish: Aluminium (ALU) Part No.

Description

DPK.TOUCAN.2M

Profile & Backing Plate 2 metres

TOUCAN is installed using pressure to attach it to 6mm and 8mm shelves. Applied to frosted glass shelves, it creates a lighting effect diffused across the entire surface. Applied to transparent glass shelves, it lights the front edge. LED strip with IP44 protection is highly recommended.

Join us on social media! @FurnwareGroup

529

Lighting Solutions Profile Collection

Skyline Profile

Part No.

Description

DPK.SKYLINE.2M

2 metres Back & Front Profile, Diffuser & Fixing Clips

Innovative Fixing System SKYLINE has a concealed fixing system where the base profile is inserted into the pre-prepared groove and the lighting profile simply clips onto the base. This allows for fast installation and easy removal in the rare event that this becomes necessary.

530

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• Made in Italy •• Suitable for cabinet bases 18-19mm thick •• Aluminium Profile only. (No light source included.

Suitable light source such as FLEXYLED CR must be purchased separately) •• Back profile not necessary for entire length of front profile •• Fixing clips are recommended at least 4pcs per metre of SKYLINE profile •• Diffuser profile is compatible with DIVA and TWIG profiles •• Finish: Aluminium (ALU)

I

Lighting Solutions Profile Collection

Goccia Profile •• Made in Italy •• Illuminated hanging rail profile. (Profile only, light source must be ordered separately. Use Flexyled CR).

•• End pillars fix through the shelf with M6 bolts •• Can be cut to the length required •• Plastic strip on top of profile to reduce scratching from coat hangers •• Ends caps easily removeable to allow for insertion of LED strip and cables •• Maximum load 15kg per metre •• Finish: Aluminium (ALU), Matt Black (MBL) Part No.

Finish

Description

DPK.GOCCIA.2M

ALU, MBL

Profile & Diffuser 2 metre

DGC.EP

ALU, MBL

End pillars (pair)

C E

OA

E = OA - 44mm E = C - 8mm

Ordering online is now even easier! www.furnwaregroup.com.au

531

Lighting Solutions Spotlights Collection

Spotlights

Metris

The Domus Line Spotlights Collection comprises spot and accent lighting to suit a wide range of décor. From the longstanding staple Metris to the latest technology Atom, Domus Line has it covered. Antique or modern, Classic or Smally whatever your style we have spotlights which will suit, and for that extra highlight the ever-popular Pixel narrows it down to accentuate even further. Each Domus Line spotlight is designed to be installed directly into your cabinets and furniture and connects seamlessly with our strip lighting systems. Spotlights Collection is available to suit 12v, 24v or 350mA systems with patented “Plug&Play” system available on some models.

METRIS is just 8mm thick for recessed installation on a 57mm hole with a functional pressure fixing system. Ideal for installation in furnishing compositions in which holes can be drilled in advance to insert the recessed mounting devices.

ATOM is a 24V DC spotlight designed for recessed installation in a hole Ø57mm just 8mm deep. It is installed on panels with both through and blind holes. ATOM incorporates a special LED module with LGP diffuser, ensuring a uniform projection beam without the dot effect.

Smally SMALLY is a spotlight designed for recessed installation in a hole Ø57mm and just 12mm deep. It is installed on panels with both through and blind holes. The fixing system, with two steel clamping springs, is easy to install without the use of tools.

SMALLY incorporates a high-performance SMD LED module with no-dot effect technology, ensuring a uniform projection beam without the dot effect. SMALLY PLUS features the innovative Plug&Play system (patented), for easy disconnection of the power cord from the spotlight. SMALLY IP44 is protected against splashes of water and is ideal for installation in bathrooms and wet areas.

532

Furnware Group • Talk to the experts on 1300 222 600

DOMUS Classic Collection combines industry expertise, craftsmanship, and new technologies. Experts in metal alloy die casting as well as competent connoisseurs of shapes and finishes, typical of the tradition of Classic furniture. The development of each decorative ring mould of the DOMUS Classic collection has been perfected by the expert hands of skilled decorators, thus making shapes and details unique and exclusive.

Titan TITAN is an LED panel for surface installation with a thickness of only 6mm. The luminaire integrates the special LGP LED technology that guarantees a very wide projection angle which allows a homogeneous light of the worktop.

Pixel PIXEL is a minimal spotlight for accent lighting. Designed for recessed applications in 30mm holes just 13mm deep with a functional pressure fixing system. PIXEL is manufactured with a solid brass body with quality electroplated finishes.

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Atom

Classic

I

Lighting Solutions Spotlights Collection

No Dots Technology New technology is incorporated into the LED sandwich which does not allow the individual LED dots to be visible giving a smooth and homogenous diffused light with no shadows or accents and devoid of the typical dotted effect of traditional LED spotlights. The technology also allows the fitting to maintain a consistent look even when switched off. Atom, Smally, Classic and Titan collections all employ this technology.

No Dots

Plug & Play System The Smally Plus spotlight employs an innovative system where the power lead can be disconnected from the light body allowing for easy removal and replacement where necessary.

IP44 Protection Smally IP44 is protected against splashes of water with IP44 protection degree, designed for use in humid environments such as bathrooms, saunas, etc.

IP44

Hassle free ordering! Email us on info@furnwaregroup.com.au

533

Lighting Solutions Spotlights Collection

KEY FEATURES Power Power supply Light Source Installation Protection

3W

Colour appearance

natural white

Colour temperature

4000 Kelvin

Luminous flux

195 lm

Luminous efficiency

65 lm/W

CRI

Ra ≥ 80

Colour appearance

warm white

Colour temperature

3000 Kelvin

Luminous flux

180 lm

Luminous efficiency

60 lm/W

CRI

Ra ≥ 80

24Vdc LGP LED Module Recessed or Surface Mount IP20

Atom

Chrome Plated (CP)

Matt Black (MBL)

Satin Nickel (SN)

1,2

8

Ø57

534

Ø68

Furnware Group • Talk to the experts on 1300 222 600

Part No.

Finish

Light Colour

DATM24.WW

CP, MBL, SN

Warm White

DATM24.NW

CP, MBL, SN

Natural White

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• Made in Italy •• 2 metre cable with Micro24 Connectors supplied •• 8mm installation depth •• “No Dots” technology gives a uniform light output •• Recessed LED light fitting only. For surface mounting spacers see next page •• Fitting only (LED driver must be ordered separately) •• Finish: Chrome Plated (CP), Matt Black (MBL), Satin Nickel (SN)

I

Lighting Solutions Spotlights Collection

Atom SP Spacer •• Spacer for surface mounting Atom lights •• Spacer only. Light must be ordered separately •• Finish: Chrome Plated (CP), Satin Nickel (SN), Matt Black (MBL) Part No.

Finish

METSP

CP, SN, MBL

Satin Nickel (SN)

Chrome Plated (Cp)

Matt Black (MBL)

Extension Cable - Micro 24 •• Use for extending cable between LED Driver distribution block, and the light fitting •• This cable should be kept to the minimum length possible Part No.

L mm

DEXT24.1000

1000

DEXT24.2000

2000

24V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro24 distributor block connected Part No.

Wattage

Max No. Lights

DSNP15.24

15W

5

DSNP30.24

30W

10

DSNP75.24

75W

25

Join us on social media! @FurnwareGroup

535

Lighting Solutions Spotlights Collection

Colour appearance

natural white

Colour temperature

4300 Kelvin

3W

Luminous flux

390 lm

12Vdc

Luminous efficiency

130 lm/W

CRI

Ra ≥ 80

Colour appearance

warm white

Colour temperature

3000 Kelvin

Luminous flux

360 lm

Luminous efficiency

120 lm/W

CRI

Ra ≥ 80

KEY FEATURES Power Power supply Light Source Installation Protection

SMP LED Module Recessed or Surface Mount IP20 or IP44

Smally Plus •• Made in Italy •• 2 metre cable with Micro12 Connectors supplied •• 12mm installation depth •• Plug & Play system with plug on the light body •• “No Dots” technology gives a uniform light output •• Recessed LED light fitting only. For surface mounting spacers see below •• Fitting only (LED driver must be ordered separately) •• Finish: Chrome Plated (CP), Satin Nickel (SN)

Chrome Plated (Cp)

Satin Nickel (SN)

Finish

Light Colour

DSM12.WW

CP,SN

Warm White

DSM12.NW

CP,SN

Natural White

12

Ø57

Part No.

No Dots

Ø72

12

Ø57

min. Ø8

Smally IP44 - Splash Protected •• Made in Italy •• IP44 rated. Sealed against splashes of water.

Suitable for wet areas •• 2 metre cable with Micro12 Connectors supplied •• 12mm installation depth •• “No Dots” technology gives a uniform light output •• Recessed LED light fitting only. Surface mounting spacers see next page •• Fitting only (LED driver must be ordered separately) •• Finish: White (WH) Part No.

Finish

Light Colour

DSM12.WW

WH

Warm White

DSM12.NW

WH

Natural White

536

Furnware Group • Talk to the experts on 1300 222 600

No Dots

IP44

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

2

I

Lighting Solutions Spotlights Collection

Smally SP Spacer •• Made in Italy •• Spacer for surface mounting Smally lights •• Spacer only. Light must be ordered separately •• Finish: Chrome Plated (CP), Satin Nickel (SN), White (WH) Part No.

Finish

DSMSP

CP, SN, WH Satin Nickel (SN)

Chrome Plated (Cp)

White (WH)

19

Ø 74,5

Extension Cable - Micro 12 •• Use for extending cable between LED Driver distribution block, and the light fitting •• This cable should be kept to the minimum length possible Part No.

L mm

DEXT12.1000

1000

DEXT12.2000

2000

12V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro12 distributor block connected Part No.

Wattage

Max No. Lights

DSNP15.12

15W

5

DSNP30.12

30W

10

DSNP75.12

75W

25

Ordering online is now even easier! www.furnwaregroup.com.au

537

Lighting Solutions Spotlights Collection

KEY FEATURES Power Power supply Light Source Installation Protection

1.6W

Colour appearance

natural white

Colour temperature

4400 Kelvin

Luminous flux

145 lm

Luminous efficiency

90 lm/W

CRI

Ra ≥ 80

Colour appearance

warm white

Colour temperature

3200 Kelvin

Luminous flux

135 lm

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

12Vdc SHD LED Module Recessed or Surface Mount IP20

•• Made in Italy •• 2 metre cable with Micro12 Connectors •• 8mm installation depth •• Recessed LED light fitting only.

For spacers see next page •• Fitting only (LED driver must be ordered separately) •• Finish: Chrome Plated (CP), Satin Nickel (SN), White (WH)

Satin Nickel (SN)

Chrome Plated (CP)

Part No.

Finish

Light Colour

DM12.WW

CP, SN, WH

Warm White

DM12.NW

CP, SN, WH

Natural White

White (WH)

538

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Metris

I

Lighting Solutions Spotlights Collection

Metris SP Spacer •• Spacer for surface mounting Metris lights •• Spacer only. Light must be ordered separately (Metris see previouse page) •• Finish: Chrome Plated (CP), Satin Nickel (SN), White (WH) Part No.

Finish

METSP

CP, SN, WH

Satin Nickel (SN)

Chrome Plated (CP)

White (WH)

Extension Cable - Micro 12 •• Use for extending cable between LED Driver distribution block, and the light fitting •• This cable should be kept to the minimum length possible Part No.

L mm

DEXT12.1000

1000

DEXT12.2000

2000

12V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro12 distributor block connected Part No.

Wattage

Max No. Lights

DSNP15.12

15W

9

DSNP30.12

30W

18

DSNP75.12

75W

46

Hassle free ordering! Email us on info@furnwaregroup.com.au

539

Lighting Solutions Spotlights Collection

KEY FEATURES Power Power supply Light Source Installation Protection

3W 12Vdc

Colour appearance

warm white

Colour temperature

3000 Kelvin

Luminous flux

360 lm

Luminous efficiency

120 lm/W

CRI

Ra ≥ 80

SMP LED Module Recessed IP20

Apsley •• Made in Italy •• 2 metre cable with Micro 12 Connectors •• Fitting only (LED driver must be ordered separately) •• Metal alloy housing with opal diffuser •• “No Dots” technology gives a uniform light output •• No need to cut square hole, drill hole 68mm Ø •• Finish: Antique Brass (AB), Satin Nickel (SN) Finish

Light Colour

AB, SN

Warm White

Satin Nickel (SN)

No Dots

Akoya •• Made in Italy •• 2 metre cable with Micro 12 Connectors •• Fitting only (LED driver must be ordered separately) •• Metal alloy housing with opal diffuser •• “No Dots” technology gives a uniform light output •• Finish: Antique Brass (AB), European Pewter (EPW)

Antique Brass (AB)

Part No.

Finish

Light Colour

DCAKO12.WW

AB, EPW

Warm White

European Pewter (EPW)

540

Furnware Group • Talk to the experts on 1300 222 600

No Dots

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Antique Brass (AB)

Part No. DCASY.WW

I

Lighting Solutions Spotlights Collection

Passepartout •• Made in Italy •• 2 metre cable with Micro 12 Connectors •• Fitting only (LED driver must be ordered separately) •• Metal alloy housing with opal diffuser •• “No Dots” technology gives a uniform light output •• Finish: Antique Brass (AB), European Pewter (EPW) Part No.

Finish

Light Colour

DCPPT.WW

AB, EPW

Warm White

Antique Brass (AB)

European Pewter (EPW)

No Dots

Extension Cable - Micro 12 •• Use for extending cable between LED Driver distribution block, and the light fitting •• This cable should be kept to the minimum length possible Part No.

L mm

DEXT12.1000

1000

DEXT12.2000

2000

12V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro12 distributor block connected Part No.

Wattage

Max No. Lights

DSNP15.12

15W

4

DSNP30.12

30W

8

DSNP75.12

75W

25

Join us on social media! @FurnwareGroup

541

Lighting Solutions Spotlights Collection

KEY FEATURES Power Power supply Light Source Installation Protection

6W

Colour appearance

natural white

Colour temperature

4000 K

Luminous flux

270 lm

Luminous efficiency

45 lm/W

CRI

Ra ≥ 80

Colour appearance

warm white

Colour temperature

3000 K

Luminous flux

240 lm

Luminous efficiency

40 lm/W

CRI

Ra ≥ 80

12Vdc LGP LED Module Surface Mount IP20

•• Made in Italy •• 2 metre cable with Micro12 Connectors supplied •• Rectangle aluminium housing with opal diffuser •• “No Dots” technology gives a uniform light output •• Supplied with screw hole plug caps so that it can be installed without the stainless steel surround leaving it to be white •• Light fitting only (LED driver must be ordered separately) •• Finish: Stainless Steel (SS) Part No.

Furnware Group • Talk to the experts on 1300 222 600

Light Colour

DTTN.WW

SS

Warm White

DTTN.NW

SS

Natural White

542

Finish

No Dots

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Titan

I

Lighting Solutions Spotlights Collection

Extension Cable - Micro 12 •• Use for extending cable between LED Driver distribution block, and the light fitting •• This cable should be kept to the minimum length possible Part No.

L mm

DEXT12.1000

1000

DEXT12.2000

2000

12V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro12 distributor block connected Part No.

Wattage

Max No. Lights

DSNP15.12

15W

2

DSNP30.12

30W

4

DSNP75.12

75W

12

Ordering online is now even easier! www.furnwaregroup.com.au

543

Lighting Solutions X-Sign

KEY FEATURES

Power supply

10W 24Vdc

Light Source

LGP LED Module

Installation

Under Cabinet or On Wall

Protection

natural white

Colour temperature

3900 Kelvin

Luminous flux

480 lm

Luminous efficiency

48 lm/W

CRI

Ra ≥ 80

IP20

X - Sign •• Made in Italy •• Conceived as a decorative light which provides illumination to work surfaces •• Available as a slave (no switch) or with integrated master touch dimmer switch.

•• Concealed mounting for under cabinet installations •• White light body with opal PMMA diffuser •• Fitting only (LED driver must be ordered seperately see next page) •• Finish: White (WH) Part No.

Finish

Description

DXS24.NW

WH

Slave (no touch dimmer)

DXSM24.NW

WH

Master touch dimmer

-

No Dots

544

Furnware Group • Talk to the experts on 1300 222 600

+

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Power

Colour appearance

I

Lighting Solutions X-Sign

X - Sign 4F •• Made in Italy •• Conceived as a decorative light which compliments the X-SIGN under cabinet light •• Available as a slave (no switch) or with integrated master touch dimmer switch.

•• Concealed mounting bracket for wall installation •• White light body with opal PMMA diffuser •• Fitting only (LED driver must be ordered seperately see below) •• Finish: White (WH) Part No.

Finish

Description

DXS4F24.NW

WH

Slave (no touch dimmer)

DXS4FM24.NW

WH

Master touch dimmer

-

+

No Dots

24V DC LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with Micro24 distributor block connected Part No.

Wattage

Max No. Lights

DSNP15.24

15W

1

DSNP30.24

30W

3

DSNP75.24

75W

7

Hassle free ordering! Email us on info@furnwaregroup.com.au

545

Lighting Solutions Pixel Collection

KEY FEATURES Power Power supply Light Source Installation Protection

1.2W

Colour appearance

natural white

Colour temperature

3900 Kelvin

Luminous flux

100 lm

Luminous efficiency

85 lm/W

CRI

Ra ≥ 80

Colour appearance

warm white

Colour temperature

3000 Kelvin

Luminous flux

90 lm

Luminous efficiency

75 lm/W

CRI

Ra ≥ 80

350mA SMD LED Module Recessed IP20

Chrome Plated (CP)

Satin Nickel (SN)

•• Made in Italy •• 2 metre cable with BUS connector •• Solid brass housing •• High efficiency optics giving a 40° beam angle •• Fitting only. (LED driver must be ordered separately) •• Finish: Chrome Plated (CP), Satin Nickel (SN) Part No.

Furnware Group • Talk to the experts on 1300 222 600

Light Colour

DPX.WW

CP, SN

Warm White

DPX.NW

CP, SN

Natural White

546

Finish

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

Pixel V13

I

Lighting Solutions Pixel Collection

Minicon 12V DC - 350mA Converter •• Converts 350mA LED fittings to operate on 12V DC •• Maximum load 6W •• Can be used in a circuit with Domus Line switches Part No. DMC12.350

BUS Connector - Jumper Wires •• Replacement jumper wires for 350mA system Part No. D350JW

350mA LED Drivers •• C-Tick & Australian Standards Approved •• Supplied with 2 metre lead and plug •• Supplied with BUS jumper wires and terminal block Part No.

Wattage

Max No. Lights

DSNP6.350

6W

Up to 5 max

DSNP12.350

12W

Min 5 to 10 max

Join us on social media! @FurnwareGroup

547

Lighting Solutions X-Driver

X-DRIVER MAKE YOUR HOME SMART WITH X-DRIVER

X-DRIVER

DOMUS4U APP COMPATIBLE WITH X-DRIVER TO MANAGE LIGHTS FROM SMARTPHONES.

Domus Line design

All-in-one LED converter Input: 110-240Vac Output: 12-24Vdc Power: 15W, 30W, 60W Power cord: Plug & Play Connection System: Micro12 - Micro24

548

Furnware Group • Talk to the experts on 1300 222 600

Apple and the Apple logo are trademarks of Apple Inc.

Google Play and the Google Play logo are trademarks of Google Inc.

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

The new smart X-DRIVER LED converter, available in three wattages (15W, 30W and 60W) is an all-in-one device. Three control modules operate two outputs dedicated to infrared sensors and presence sensors, or convert the power supply into a wireless receiver for remote controls and, using Bluetooth technology, into a device to control all Domus line LED luminaires by smartphone. X-DRIVER is a multi-net power supply (110240Vac) for either 12Vdc or 24Vdc LED devices with a Plug&Play power cord available with standard international plugs. New Wifi module allows X-Driver to connect to "smart home" systems. ENEC, UL* and RCM approved, X-DRIVER is a universal power supply.

I

Lighting Solutions X-Driver

SMART LED UNIVERSAL CONVERTER

CM1-XD _ PIR movement sensor and IR sensor CM2-XD _ RF remote control CM3-XD _ Bluetooth for App CM4-XD _ Wifi for App

EUROPA standard

CM1 CM2 CM3 CM4

USA - CANADA standard

UK standard

AU - NZ standard

PIR sensor

12Vdc

IR sensor

24Vdc

X-DRIVER + CM3 + DOMUS4U APP This configuration allows control of up to 5 independent X-DRIVERs after downloading the DOMUS4U app.

X-DRIVER + CM2 + CALL ME With this configuration, an unlimited number of X-DRIVERs can be combined with a single wireless remote control, provided they are no more than 15 metres away.

Ordering online is now even easier! www.furnwaregroup.com.au

549

Lighting Solutions X-Driver

X-Driver 24V •• Made in Italy •• Supplied complete with AU plug and lead •• RCM and Australian Standards approved •• Built-in distributor block with Micro24 female connectors •• Select control module (below) for sensor/remote control •• Compatible with all 24V DC Domus Line lights, sensors and switches Part No.

Wattage

DXDR15.24

15W

DXDR30.24

30W

DXDR60.24

60W

12V DC LED Drivers •• Made in Italy •• Supplied complete with AU plug and lead •• RCM and Australian Standards approved •• Built-in distributor block with Micro12 female connectors •• Select control module (below) for sensor/remote control •• Compatible with all 12V DC Domus Line lights, sensors and switches Part No.

Wattage

DXDR15.12

15W

DXDR30.12

30W

DXDR60.12

60W

X-Driver Control Modules •• Made in Italy •• Compatible with either 24V DC or 12V DC X-Driver (above) •• Select module based on required function

A B C D A

B

550

The CM1-XD control module activates the two outputs dedicated to infrared IR-XD sensors and PIR-XD presence sensors, to be purchased separately..

The CM2-XD control module transforms the power supply into a wireless receiver for remote controls, to be purchased separately.

C

The CM3-XD control module activates the Bluetooth function that allows you to manage the lights from smartphones, via the DOMUS4U App.

D

The CM4-XD control module enables the wireless function, which allows X-Driver to interface with the Wifi network.

Furnware Group • Talk to the experts on 1300 222 600

Part No.

Type

Function

A

DXDRM.CM1.IRS

CM1-XD

IR-XD & PIR-XD

B

DXDRM.CM2.WRC

CM2-XD

2.4G Wireless remote

C

DXDRM.CM3.BLT

CM3-XD

Bluetooth

D

DXDRM.CM4.WIFI

CM4-XD

Wifi

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

I

Lighting Solutions X-Driver

X-Driver PIR Sensor •• Passive infrared movement sensor •• For use with X-Driver 12V DC or 24V DC and X-Driver control module CM1-XD only •• Recessed installation Part No. DXDR.PIR.XD

Recessed installation

X-Driver Infrared Switch •• Infrared door switch or touchless dimmer switch •• For use with X-Driver 12V DC or 24V DC and X-Driver control module CM1-XD only •• Recessed or surface mount installation

Part No.

Type

Function

DXDR.IRXD.LSW

IR-XD LSW

Door switch

DXDR.IRXD.DSW

IR-XD DSW

Touchless dimmer switch

Recessed installation IR-XD LSW

Surface installation IR-XD LSW

Under cabinet installation IR-XD DSW

X-Driver Remote Control •• Single channel or multi-channel (up to 3) remote control •• For use with X-Driver 12V DC or 24V DC and X-Driver control module CM2-XD only

Part No.

Function

DXDR.RCI.WH

Single channel

DXDR.RC3.WH

Up to 3 channels

Hassle free ordering! Email us on info@furnwaregroup.com.au

551

Lighting Solutions Sensor Switches

TOUCH ME 2.0 Touch Dimmer Switch •• Touch sensitive dimmer switch •• Simple installation in a 30mm Ø round hole •• Supplied with cables to suit either 12V DC or 24V DC systems •• Maximum load 30W @ 12V DC or 60W @ 24V DC •• Integrated night-light feature which can be disabled •• Supplied with distributor block for connection of lights •• Finish: Aluminium (ALU) Part No. DTM2.0FW.ALU

+

-

How TOUCH ME works Turn on and off simply with a quick touch.

With a prolonged touch, it is possible to regulate the light intensity (dimmer function). A short flash of TOUCH ME indicates that maximum light intensity has been reached, which will be memorized until it is next reset (level memory).

CAPSENS 2.0 Concealed Touch Dimmer Switch

Part No. DCAP2.0FW.BL

-

glass

plexiglass

How CAPSEN works

552

Material

Maximum thickness

wood

30mm

plexiglass

20mm

glass

12mm

Turn on and off simply by contact of the hand with the surface below which CAPSENS is applied. With a prolonged touch, it is possible to regulate the light intensity (dimmer function). A short flash of CAPSENS indicates that maximum light intensity has been reached. The light intensity level will be memorized until it is next reset (level memory).

Furnware Group • Talk to the experts on 1300 222 600

+

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

wood

•• Totally concealed touch switch •• Supplied with cables to suit either 12V DC or 24V DC systems •• Maximum load 30W @ 12V DC or 60W @ 24V DC •• Supplied with distributor block for connection of lights

I

Lighting Solutions Sensor Switches

DOTTI Touch Dimmer Switch •• Touch sensitive dimmer switch •• Surface mount only, supplied with concealed mounting bracket •• Supplied with cables to suit either 12V DC or 24V DC systems •• Maximum load 36W @ 12V DC or 72W @ 24V DC •• Integrated night-light feature which can be disabled •• Supplied with distributor block for connection of lights •• Aluminium housing •• Finish: Aluminium (ALU) Part No.

Finish

DDTDS2.0FW.ALU

ALU

-

+

How DOTTI works Turn on or off simply with a quick touch.

Touch for longer to adjust light intensity (dimmer function).

MINI TOUCH Touch Dimmer Switch •• Touch sensitive dimmer switch •• Recessed mounting in 18mm Ø hole •• 24V DC only, Maximum load 36W •• Supplied with distributor block for connection of lights •• Aluminium housing •• Finish: Aluminium (ALU) Part No.

Finish

DMT24.ALU

ALU

-

+

How MINI TOUCH works Turn on and off simply with a quick touch. With a prolonged touch, it is possible to regulate the light intensity (dimmer function).

Join us on social media! @FurnwareGroup

553

Lighting Solutions Sensor Switches

IR 2.0 FC Sensor Switch

How IR2.0FC works

back edge of door

In limit-switch setup IR 2.0 FC turns the luminaire on and off when the door is opened and closed.

For perfect IR 2.0 FC operation, it is recommended not to use doors with reflective, brilliant or mirrored white surfaces.

It is also recommended to observe the minimum and maximum distance of the sensor from the door, as indicated in the installation manual.

The IR 2.0 FC set up can be changed by pressing the microswitch for 3 seconds and then switch to the IR 2.0 SD setup in dimmer switch mode.

•• Infrared door switch/dimmer switch •• Supplied with cables to suit either 12V DC or 24V DC systems •• Dual mode on/off switch or touchless dimmer switch •• Supplied as a door switch out of the box •• Recessed or surface mount installation •• Maximum load 24W @ 12V DC or 48W @ 24V DC •• Supplied with distributor block for connection of lights •• Finish: White (WH), Black (BL) Part No.

Finish

DIR12.0FCFW

WH, BL

+

-

IR Sensor

or

In-compartment

Recessed installation

Surface installation

IR MK2 FC Sensor Switch Infrared door switch/dimmer switch Dual mode on/off switch or touchless dimmer switch Supplied as a door switch out of the box Removeable recessed sensor head with 2000mm cable Supplied with cables to suit either 12V DC or 24V DC systems •• Maximum load 24W @ 12V DC or 48W @ 24V DC •• Supplied with distributor block for connection of lights •• Finish: White (WH) Part No. DIRMK2.FCFW.WH How IR MK2 FC works

back edge of door

-

IR MK2 FC is supplied in limit-switch mode. IR MK2 FC turns the luminaire on and off when the door is opened or closed. For perfect IR MK2 FC operation, it is recommended not to use doors with reflective, brilliant or mirrored white surfaces.

It is also recommended to observe the minimum and maximum distance of the sensor from the door, as indicated in the installation manual.

IR Sensor

+

or

Electronic control module

Infrared sensors

554

Furnware Group • Talk to the experts on 1300 222 600

NOTE: Read the installation manual to learn details drilling for assembly.

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

•• •• •• •• ••

I

Lighting Solutions Sensor Switches

DOTTI IR Proximity Sensor Switch •• Infrared proximity door/drawer sensor switch •• Supplied with cables to suit either 12V DC or 24V DC systems •• Maximum load 36W at 12V DC or 72W at 24V DC •• Up to 100mm detection distance •• Supplied with distributor block for connection of lights •• Aluminium housing •• Can be changed to a touchless dimmer switch •• Supplied with concealed mounting bracket •• Finish: Aluminium (ALU) Part No.

Finish

DDIFR2.0FW

ALU

How DOTTI IR works

-

IR Sensor

+

or

DOTTI IR is an infrared sensor with endstroke function for interior installation. luminaires connected to DOTTI SP are turned on and off by opening and closing the door in front of the sensor.

It is also recommended to observe the minimum and maximum distance of the sensor from the door, as indicated in the installation manual.

The set-up of DOTTI IR can be changed by pressing the button and then switching from end-stroke mode to dimmable on/off switch mode.

USB Double USB Port •• Recessed double USB power supply port •• Requires 12V DC power supply •• 2 x 5V DC 1A power supply ports •• will charge anything that requires a USB port for charging devices up to 1A •• Supplied with optional spacer for surface mount applications •• Finish: Aluminium (ALU) Part No.

Finish

DTUSB12.ALU

ALU

Ordering online is now even easier! www.furnwaregroup.com.au

555

Lighting Solutions Sensor Switches

COMBO FW Multiple Independent Sensor •• 3 different lighting programs possible •• Small unobtrusive independant recessed sensor heads with 2000mm cables •• Control module and sensor heads must be ordered seperately •• Supplied with cables to suit either 12V DC or 24V DC systems •• Maximum load 30W @ 12V DC or 60W @ 24V DC •• Finish: Black (BL)

A

Part No.

Description

A

DCOMBO.CU1224

Control Module

B

DCOMBO.RS.BL

Recessed Sensor

B

IR Sensor

How COMBO works COMBO is an infrared limit-switch with multiple independent photocells (up to 3 sensors). The connected luminaires are turned on and off by opening and closing the door on the back of which the sensors are installed. COMBO can be programmed with three different set-ups.

Sensors are available for recessed (type B) and surface installation with the photocell tilted 20° (type C).

A

B

NOTE: Read the installation manual to learn details on drilling for assembly.

COMBO may be programmed with three different set-ups

PROGRAM 1 - ALL ON/OFF

PROGRAM 2 – TWO LIGHTS ON INDEPENDENTLY This set-up allows two luminaires or two groups to be turned on independently. The group with two sensors will turn on when any of the doors are opened, and turns off only when all doors are closed. The third sensor works independently from the other two.

Turning on and turning off are controlled by opening and closing the door, onto the back of which the third sensor is installed.

PROGRAM 3 - THREE ON INDEPENDENTLY This set up allows three luminaires or group of luminaires to be turned on independently.

Each sensor can turn on or off independently the luminaire or group of luminaires to which it is connected. Turning on and turning off are operated by opening or closing the door, onto the back of which each sensor is installed.

556

Furnware Group • Talk to the experts on 1300 222 600

© Copyright 2019 All Rights Reserved. Specifications subject to change without notice.

This set-up allows all luminaires connected to COMBO to be turned on and off simultaneously. The luminaire or group of luminaires is turned on when any of the doors are open and turned off only when all doors are closed.

I

Lighting Solutions Sensor Switches

PIR 2.0 Passive Infrared Sensor •• Passive infrared motion sensor •• Recessed installation •• Supplied with cables to suit either 12V DC or 24V DC systems •• Maximum load 36W @ 12V DC or 72W @ 24V DC •• Finish: White (WH), Black (BL) Part No.

Finish

DPIR2.0FW

WH, BL

sensor

How PIR 2.0 works The PIR 2.0 (passive infrared sensor) detects motion, combined with temperature variations of at least 4°C in a cone with an opening of about 80°. For correct operation, the photocell of the sensor must be installed in a position which does not affect its sensitivity. Horizontal sensitivity (up to about 400 cm) and vertical sensitivity (up to 220cm) may be reduced if the photocell of the sensor is installed in a position (or at a height) which reduces the detection cone, e.g. near shelves or sides of a wardrobe. It is also not recommended to install the photocell in line with the central closing of the wardrobe doors in order to avoid turning on when undesired caused by detection of minimum motions.

Temperature variations caused by air conditioners, steam or motions within the detection cone can also activate the photocell of the sensor.

The sensor is protected against cell phone interference, radiofrequency transmissions etc., in accordance with current EU directives. When first turned on, the sensor carries out an automatic set-up by detecting the temperature and installation conditions. It is necessary to wait around 40 seconds for this operation to be completed, during which the wardrobe door must remain closed.

The sensor automatically turns on the luminaires connected to it when it detects motion and temperature changes in the cone.

After a pre-set time of around 30 seconds during which the photocell no longer detects any presence, the luminaire is automatically turned off, even if the wardrobe door is open.

The photocell will again turn on the next detection.

vertical detection up to 220 cm temperature difference

radiation infrared

radiation infrared

radiation infrared

motion horizontal detection up to 400 cm

Hassle free ordering! Email us on info@furnwaregroup.com.au

557

Furnware Group

Distribution Centre: 1-5 Jessica Place, Prestons NSW 2170 Postal: PO Box 250, Engadine NSW 2233

1300 222 600 www.furnwaregroup.com.au