FSP Industrial Products
OZ CHOKS®
Call 844-377-6463
Introduction
OZ CHOKS®
Contents 2
OZ CHOKS®
4
OZ CHOKS®
5
IIntroduction 2
ADVANTAGE 4 Heavy Duty Plastic Wheel Choks
5
CHOK BRACKETS
11
CHOK BRACKETS CHOK 155 TROLLEY RIPPER CHOK, DRILL CHOK & RIPPER PAD
15 15
Mounting Brackets for OZ Choks
HEAVY DUTY MACHINERY CHOKS
CABLE COVERS
HEAVY DUTY MACHINERY CHOKS
11
16
Heavy Duty Plastic Wheel Choks Heavy Duty Plastic Wheel Choks are available in a standard color of yellow with other colors available on request. Traction pads are essential to the safe usage of our Chok range and are available. Designed as a one piece moulded chok with carrying handle intergrated into construction. OZ CHOK Composition FSP OZ Choks are manufactured from 100% Polyethylene and high density urethane foam. All materials used in the construction of our choks are 100% virgin materials.
16
17
17
FSP OZ CHOKS are designed to fit a wide range of tire sizes. • Always use an adequate number of choks as per your risk assessment. • Always place choks on solid surface with vehicle stopped / park brake on. • Always place choks squarely against the centre of tire. • Use contradictory to instructions may cause product failure/ personal injury. • NEVER use damaged choks. • NEVER drive over a chok. Operator MUST comply with manufaturers safe operation precheck manual. Safety Alert: FSP Mining Products takes no responsibility for the negligence of users of our OZ CHOKS® who do not carry out a safety check to ensure that the chock is intact prior to use.
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 2
FSP Industrial Products Call 844-377-6463
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 3
FSP Industrial Products Call 844-377-6463
OZ CHOKSÂŽ ADVANTAGE
ADVANTAGES
OF OUR POLY PRODUCT Although we have the strongest and most reliable wheel chok on the market today. FSP Oz ChoksÂŽ are a low-maintenance rotationally moulded one piece construction which makes them light weight, UV stabilised, heavy duty, chemical, oil & water-resistant, ultra-durable, corrosion-resistant.
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 4
FSP Industrial Products
OZ CHOKS®
Call 844-377-6463
Heavy Duty Plastic Wheel Choks
Advised vehicle mass is a guide only. This will vary due to environmental factors. Please complete an adequate risk assessment before using chocks. Do not use chocks if chocks are damaged for further information please see our website. www.fspamerica.cus
Designed for light vehicles up to 10,000lbs GVM, Minimum 2 choks. • • • •
Light weight with tough urethane construction Rated for vehicles with a gross operating weight up to 10,000 lbs. 3rd party tested for compliance ANSI compliant color written guidelines on proper chocking procedures
• • • •
Complies with SAE-J348, NFPA 1901, and NFPA 1906 Standards Resistant to oils, fuels and solvents. Strong carrying handle on the backside of the chock. Heavy Duty Plastic Wheel Choks are available in a standard SAFETY color of yellow.
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 5
FSP Industrial Products Call 844-377-6463
Advised vehicle mass is a guide only. This will vary due to environmental factors. Please complete an adequate risk assessment before using chocks. Do not use chocks if chocks are damaged for further information please see our website. www.fspamerica.us
• • • •
Minimum of 2 choks for 45,000lbs GVM
Light weight with tough urethane construction Rated for vehicles with a gross operating weight up to 45,000 lbs. 3rd party tested for compliance ANSI compliant color written guidelines on proper chocking procedures
• • • •
Complies with SAE-J348, NFPA 1901, and NFPA 1906 Standards Resistant to oils, fuels and solvents Strong carrying handle on the backside of the chock Heavy Duty Plastic Wheel Choks are available in a standard SAFETY color of yellow
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 6
FSP Industrial Products Call 844-377-6463
Advised vehicle mass is a guide only. This will vary due to environmental factors. Please complete an adequate risk assessment before using chocks. Do not use chocks if chocks are damaged for further information please see our website. www.fspamerica.us
• • • •
Designed for dual axle vehicle. Minimum of 2 choks for• 80,000lbs GVM Complies with SAE-J348, NFPA 1901, and NFPA 1906 Standards
Light weight with tough urethane construction Rated for vehicles with a gross operating weight up to 80,000 lbs. 3rd party tested for compliance ANSI compliant color written guidelines on proper chocking procedures
• Resistant to oils, fuels and solvents • Strong carrying handle on the backside of the chock • Heavy Duty Plastic Wheel Choks are available in a standard SAFETY color of yellow
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 7
FSP Industrial Products Call 844-377-6463
Advised vehicle mass is a guide only. This will vary due to environmental factors. Please complete an adequate risk assessment before using chocks. Do not use chocks if chocks are damaged for further information please see our website. www.fspamerica.us
Minimum of 4 choks for 855,000lbs GVM
• Light weight with tough urethane construction • Rated for vehicles with a gross operating weight up to 855,000 lbs., and tire sizes up to 142 in. diameter • 3rd party tested for compliance • ANSI compliant color written guidelines on proper chocking procedures
• • • • •
Maximum rated payload of 255 tons Complies with SAE-J348, NFPA 1901, and NFPA 1906 Standards Resistant to oils, fuels and solvents Strong carrying handle on the backside of the chock Heavy Duty Plastic Wheel Choks are available in a standard SAFETY color of yellow
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 8
FSP Industrial Products Call 844-377-6463
Advised vehicle mass is a guide only. This will vary due to environmental factors. Please complete an adequate risk assessment before using chocks. Do not use chocks if chocks are damaged for further information please see our website. www.fspamerica.us
Minimum of 4 choks for 1,600,000lbs GVM
• Rated for vehicles with a gross operating weight up to 1,600,000 lbs., and tire sizes up to 165 in. diameter • Light weight with tough urethane construction • 3rd party tested for compliance • ANSI compliant color written guidelines on proper chocking procedures. • Approved and being used by Caterpillar and mines worldwide.
• • • •
Complies with SAE-J348, NFPA 1901, and NFPA 1906 Standards Resistant to oils, fuels and solvents Strong carrying handle on the backside of the chock Heavy Duty Plastic Wheel Choks are available in a standard SAFETY color of yellow • Meets MSHA specifications
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 9
FSP Industrial Products Call 844-377-6463
UNRIVALLED STRENGTH & DURABILITY FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 10
FSP Industrial Products
CHOK BRACKETS
Call 844-377-6463
MOUNTING BRACKETS 304 STAINLESS STEEL MOUNTING BRACKETS
Mounting Brackets for OZ Choks
CHOK Bracket to suit OZ CHOK 075 Product Code: OZCHB075 Stainless Steel bracket to suit OZ CHOK 075
CHOK Bracket to suit OZ CHOK 055 Product Code: OZCHB055 Stainless Steel bracket to suit 55
CHOK Bracket to suit OZ CHOK 065 Product Code: OZCHB065 Stainless Steel bracket to suit OZ CHOK 065
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 11
FSP Industrial Products Call 844-377-6463
CHOK Bracket to suit OZ CHOK 105 Product Code: OZCHB105 Stainless Steel bracket to suit OZ CHOK 105
CHOK Bracket to suit OZ CHOK 155 Product Code: OZCHB155 Stainless Steel bracket to suit OZ CHOK 155
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 12
FSP Industrial Products Call 844-377-6463
MULTI-CHOK MOUNTING BRACKETS 304 STAINLESS STEEL MOUNTING BRACKETS
CHOK Storage Stand Product Code: OZCHSS
CHOK Storage Rack (Twin) Product Code: OZCHSR2
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 13
FSP Industrial Products Call 844-377-6463
CHOK Storage Rack (Quad) Product Code: OZCHSR4
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 14
FSP Industrial Products
CHOK BRACKETS
Call 844-377-6463
CHOK 155 TROLLEY
OZ CHOK 155 TROLLEY STAINLESS STEEL 155 TROLLEY
155 Trolley Product Code: OZCHTR155 Stainless Steel 155 Trolley
155 Trolley with Chok Release Product Code: OZCHTQR155B Stainless Steel 155 Trolley with Chok Release
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 15
FSP Industrial Products
RIPPER CHOK, DRILL CHOK & RIPPER PAD
Call 844-377-6463
HEAVY DUTY MACHINERY CHOKS
Drill Chok Drill Chok: Product Code: OZCHDR
Solid, transportable Drill Chok aids in the elevation of heavy equipment for loading onto floats. These units can be stacked for larger lift heights to reduce the accidental damage to machinery.
FSP Ripper Chok Polyurethane Block for aiding in the replacement of Dozer Ripper Boots. W 11 13/16” x D 7 7/8” x H11 5/8” Weight:40lb FSP Ripper Chok - Product Code: OZCHRC
FSP Ripper Pad FSP Ripper Pad - Product Code:OZCHRP Polyurethane Pad for resting and protecting Dozer Ripper Boots. Pad W15 3/4” x D15 3/4” x H1 3/4”, Handle D2 3/4”
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 16
FSP Industrial Products
CABLE COVERS
Call 844-377-6463
Cable Covers
HEAVY DUTY MACHINERY CHOKS
Cable Cover Product Code: CCC W 20 7/8” x D 39 3/4” x H2 9/16” Cable Channel Width: 3” Manufactured using polyurethane these cable covers have interlocking clips to make runs as long as you need. This helps to protect cables and hoses against damage from traffic and falling debris.
Cable Crossovers
Protects electrical cables up to 4 3/4” (120mm) in diameter during maintenance or emergency operations. (Not recommended for use by haul trucks) Durable, UV Stable, Light Weight, Rust Resistant, Non Corrosive, Impact Resistant. FSP Cable Cross Over Bridge 4 3/4” (120mm) OD hose Product Code: CCO120 W 18 7/8” x D 29 1/2” x H7 1/8” Cable Size: 4 3/4”
FSP Industrial Products - Colors shown are indicative only and may vary due to printing.
page 17
For more information regarding any of our products or to view samples, please Call 844-377-6463, email us at sales@fspindustrial.com or visit us online at: FSP Industrial Products 7612 Bluff Point Drive,HOUSTON, TX 77086 sales@fspindustrial.com
www.fspamerica.us